| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
pte_pfn() and pte_dirty() have undefined behaviour when called on a
non-present PTE. In migrate_vma_collect_pmd(), these functions may be
invoked on non-present entries (e.g., device-private entries), leading
to potential crashes from pte_pfn() or incorrect dirty folio accounting
from pte_dirty(). Fix both by guarding with pte_present() checks.
Link: https://lore.kernel.org/20260708003955.4024340-1-wangkefeng.wang@huawei.com
Link: https://lore.kernel.org/20260706111958.3649651-1-wangkefeng.wang@huawei.com
Fixes: fd35ca3d12cc ("mm/migrate_device.c: copy pte dirty bit to page")
Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PAGEMAP_SCAN reports an unpopulated pte differently depending on which
path serves the request. The PAGE_IS_WRITTEN fast path in
pagemap_scan_pmd_entry() reports a pte_none as written (and, under
PM_SCAN_WP_MATCHING, arms a marker); pagemap_page_category() returns 0 for
the same pte_none. A request that cannot take the fast path (an extra
category bit, category_anyof_mask or category_inverted) therefore reports
the pte as clean and skips arming it.
A range that was populated and then MADV_DONTNEED'd reads as written via
one mask and clean via another, and in the latter case is not re-armed for
the next round -- an incremental-dump consumer (e.g. CRIU) using a richer
mask drops the zapped range and stops tracking writes to it.
Report pte_none as written in pagemap_page_category() too. A pte_none
carries no uffd-wp marker, i.e. it is not write-protected -- the same
condition under which the present and swap cases already report
PAGE_IS_WRITTEN. The fast path applies no VMA test, so neither does this.
The hugetlb and fully-unpopulated-PMD (no page table) scans have no
PAGE_IS_WRITTEN fast path, so they do not exhibit the per-entry divergence
and are left unchanged.
Add a pagemap_ioctl selftest that populates a range, drops it with
MADV_DONTNEED, and checks that the fast path and the generic
(category_anyof_mask) path both report every page written.
Link: https://lore.kernel.org/20260707151349.92143-1-kirill@shutemov.name
Fixes: 12f6b01a0bcb ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag")
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Assisted-by: Claude:claude-fable-5
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
move_pages_huge_pmd() snapshots src_pmdval under src_ptl, drops the lock,
and, for migration entries, waits with pmd_migration_entry_wait().
Passing &src_pmdval is wrong. pmd_migration_entry_wait() must lock and
re-read the real page-table PMD; on split-PMD-lock kernels, a stack
address also resolves to the wrong lock. softleaf_entry_wait_on_locked()
then waits without a folio reference, which is safe only while serialized
against migration-entry removal by the real PT lock.
Pass src_pmd, matching __handle_mm_fault() and hmm_vma_walk_pmd().
Link: https://lore.kernel.org/20260705131231.1499198-1-usama.arif@linux.dev
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260703173903.3789516-1-usama.arif%40linux.dev?part=8
Signed-off-by: Usama Arif <usama.arif@linux.dev>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit af69016dab96 ("lib: test_hmm: implement a device release method")
moved the initial dmirror_allocate_chunk() call before cdev_device_add().
That means the struct cdev has not been added yet, so cdev_add() has not
initialized mdevice->cdevice.dev.
The coherent-device range selection uses the device minor to choose
between spm_addr_dev0 and spm_addr_dev1. Reading
MINOR(mdevice->cdevice.dev) before cdev_add() therefore always sees an
uninitialized dev_t. As a result, both coherent devices select the same
physical range, and adding the second device fails due to the overlapping
dev_pagemap range.
Use mdevice->device.devt instead. It is initialized in
dmirror_device_init() before dmirror_allocate_chunk() is called and is the
same dev_t later passed to cdev_device_add().
Link: https://lore.kernel.org/178277581197.172200.16265155329935822153.stgit@skinsburskii
Fixes: af69016dab96 ("lib: test_hmm: implement a device release method")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@gmail.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A per-node vmstat counter is pgdat->vm_stat[] plus per-cpu deltas. A
balanced counter can sit split as global=+N / per-cpu=-N.
The folds reconciling the split only walk online nodes, so when
try_offline_node() marks a node offline the per-cpu deltas are stranded.
A subsequent online resets the per-cpu area but not pgdat->vm_stat[],
orphaning the +N permanently. All NR_VM_NODE_STAT_ITEMS are affected.
The existing code zeroes the per-cpu counters and causes a permanent skew.
Fold the stranded deltas instead, before the node rejoins the online set.
The node is not online yet and the hotplug lock is held, so the remote
access to per-cpu values is safe.
Discovered when node compaction hung for a nearly empty node, as the math
to determine throttling broke. Reproduced by repeated memory
hotplug/unplug cycles on a node under pressure: NR_ISOLATED_ANON ratchets
up and never returns to zero.
Link: https://lore.kernel.org/20260627202243.758289-1-gourry@gourry.net
Fixes: 75ef71840539 ("mm, vmstat: add infrastructure for per-node vmstats")
Signed-off-by: Gregory Price <gourry@gourry.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Unlike PIO data-out, the PIO data-in protocol raises no completion
interrupt, the last interrupt announces the final data block, and once
the host has drained it from the data register the ending status must
be obtained synchronously. ata_sff_hsm_move() does this by spinning
in ata_wait_idle() for up to 10ms.
Usually this is not a big deal unless the device is slow. In my case
it's a CF card which keeps BSY asserted for multiple milliseconds(!)
after the final data block. Since the waiting happens in the
interrupt handler, under the port lock with interrupts disabled, the
CPU is hogged for milliseconds on every read command.
To improve the situation, bound the inline wait to ~100us. If the
device is still busy after that, mark the command ATA_TFLAG_POLLING,
so the interrupt handler won't race for it, and obtain the ending
status via ata_sff_pio_task(), which sleeps between status checks
instead of spinning with the lock held.
Since ata_sff_pio_task() may now finish a data-in command, it must
wait for both BSY and DRQ to clear at HSM_ST_LAST, matching what
ata_wait_idle() enforced.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The patch ("cpupower: Add generic CPPC performance display") uses
roundf() but didn't include libm explicitly. This results in build
breaks in environments where its not automatically inlined.
Add libm to the cpupower makefile to correct this.
Fixes: 68f34fad760b ("cpupower: Add generic CPPC performance display")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The SMC firmware included in macOS 27 changed the size of BCF0 key from
4 to 1 bytes. This key is used for indicating that battery state is
critically low. In addition, B0RM key has changed endianness.
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Janne Grunau <j@jannau.net>
Cc: stable@vger.kernel.org
Fixes: 0ebf821cf6c7 ("power: supply: Add macsmc-power driver for Apple Silicon")
Signed-off-by: Sasha Finkelstein <k@chaosmail.tech>
Link: https://patch.msgid.link/20260712-gate-power-v4-1-aa59c6583247@chaosmail.tech
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The IRQ module documentation displays `include/linux/device.h`, while
the link points to `include/linux/interrupt.h`. The module wraps the IRQ
registration interfaces declared in `include/linux/interrupt.h`, so fix
the displayed header path.
Fixes: 1f54d5e5cd2a ("rust: irq: add irq module")
Link: https://github.com/Rust-for-Linux/linux/issues/1246
Signed-off-by: Younes Akhouayri <git@younes.io>
Link: https://patch.msgid.link/20260717-docs-irq-rustdoc-header-v1-1-36749192aa04@younes.io
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The current implementation creates a 4K array and move it into the box.
Klint reports that this causes excesssive stack usage:
warning: stack size of `create_file_write` is 4472 bytes, exceeds the 2048-byte limit
--> samples/rust/rust_debugfs_scoped.rs:54:1
|
54 | / fn create_file_write(
55 | | mod_data: &ModuleData,
56 | | reader: &mut kernel::uaccess::UserSliceReader,
57 | | ) -> Result {
| |___________^
|
= note: the stack size is inferred from instruction `sub $0x1178,%rsp` at .text+2205
Use pin-init to create the array in-place instead.
Fixes: f656279afde1 ("samples: rust: debugfs_scoped: add example for blobs")
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260716144144.3665719-1-gary@kernel.org
[ Make the patch rustfmtcheck complient. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Due to the usage of `build_assert!` for address validity checking, these
accessors want constant offsets. Non-constant offsets can work but it
depend on compiler optimization levels, so it should be avoided.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260716142545.3622278-1-gary@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Currently the lifetime on `Core` and `CoreInternal` is covariant. This
means that they can be coerced into shorter living lifetimes. On `probe`
function, signature has `&'bound Device<Core<'a>>`; the type's wellformness
would imply `'a: 'bound` and thus the type can be coerced `&'bound
Device<Core<'bound>>`, defeating the purpose of having the lifetime bound
to prevent users of the `Core` type to escape the function.
Fix this by making the lifetime invariant, so the coercion is impossible.
The lifetime here only needs to be "branded" so it does not coerce or unify
with other lifetimes, so we do not need to ensure `'bound: 'a`.
This requires modifying `nova-core` which relies on this implied bound due
to pre-2024 capture rule. The "use" bound can be removed if built with
edition 2024.
Fixes: 24799831d631 ("rust: device: make Core and CoreInternal lifetime-parameterized")
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260713201455.640151-1-gary@kernel.org
[ Fixup the debugfs sample to use an explicit lifetime instead of
Core<'_>. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
MAX17040 does not report charger state itself, so the driver forwards
POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is
registered, power_supply_get_property_from_supplier() returns -ENODEV and
leaves the output value untouched.
max17040_get_property() currently ignores that error and returns success,
so userspace can read an uninitialized status value from the battery power
supply. This happens on systems that use the fuel gauge without a charger
supplier relationship in firmware.
Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and
propagate other supplier lookup errors.
Fixes: f4b782af61ae ("power: max17040: pass status property from supplier")
Cc: stable@vger.kernel.org # 6.7+
Signed-off-by: Jianing Li <m13940358460@163.com>
Link: https://patch.msgid.link/20260701061042.1008-1-m13940358460@163.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Fix a documentation build error by adding a bottom table border:
Documentation/ABI/testing/sysfs-class-power-bd71828:1: ERROR: Malformed table.
No bottom table border found.
============ ===========================================
1 automatic adjustment of input current limit
0 no adjustment of input current limit. This
helps for more unusual power sources like
solar modules. [docutils]
Fixes: e92786dd86a2 ("power: supply: bd71828: sysfs for auto input current limitation")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20260620011821.3568674-1-rdunlap@infradead.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
btusb_recv_event_realtek() reads the event code at data[0] and the Realtek
subevent code at data[2] before deciding whether to consume a vendor event
as a coredump.
For example, the two-byte event ff 00 contains a complete vendor-event
header declaring zero parameters. The old classifier still reads a
nonexistent third byte and can misclassify the event as a coredump if the
adjacent byte is 0x34.
Require the HCI event header and first parameter to be present before
inspecting the Realtek subevent code. Short events continue through the
normal HCI receive path, which owns their protocol validation.
Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc->session
free session
unlock rfcomm_mutex
read session->initiator
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0
Read of size 4 at addr ffff88810012a850 by task poc/92
Call Trace:
rfcomm_send_rpn+0x297/0x2a0
rfcomm_tty_set_termios+0x50d/0x850
tty_set_termios+0x596/0x950
set_termios+0x46a/0x6e0
tty_mode_ioctl+0x152/0xbd0
tty_ioctl+0x915/0x1240
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 92:
rfcomm_session_add+0x9e/0x2e0
rfcomm_dlc_open+0x8b1/0xe00
rfcomm_dev_activate+0x85/0x1a0
rfcomm_tty_open+0x90/0x280
Freed by task 68:
kfree+0x131/0x3c0
rfcomm_session_del+0x119/0x180
rfcomm_run+0x737/0x4710
Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies
that the DLC is still attached and sends the RPN frame. Have the TTY
path use the helper and drop its unlocked session check. This keeps the
session valid through both the frame construction and socket send.
Fixes: 3a5e903c09ae ("[Bluetooth]: Implement RFCOMM remote port negotiation")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The hci_sync conversion moved class-of-device and EIR generation from an
HCI request built under hdev->lock to asynchronous command sync work.
The worker holds hdev->req_lock, but that lock does not serialize access
to hdev->uuids against add_uuid() and remove_uuid(), which update the
list under hdev->lock.
The following interleaving can therefore occur:
CPU0 (command sync work) CPU1 (management socket)
fetch uuid from the list
list_del(&uuid->list)
kfree(uuid)
read uuid->size
KASAN reports the resulting use-after-free:
BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0
Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
eir_create+0xb8f/0xee0
hci_update_eir_sync+0x1c0/0x330
hci_cmd_sync_work+0x13c/0x290
process_one_work+0x63a/0x1070
worker_thread+0x45b/0xd10
Allocated by task 86:
__kasan_kmalloc+0x8f/0xa0
add_uuid+0x18a/0x4b0
hci_sock_sendmsg+0x1033/0x1ea0
Freed by task 92:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
remove_uuid+0x25e/0x560
hci_sock_sendmsg+0x1033/0x1ea0
Hold hdev->lock while generating and committing the class-of-device and
EIR snapshots. Release it before sending an HCI command, so controller
waits do not happen under the device lock. This protects all UUID list
walks in these paths and restores the serialization lost in the command
sync conversion.
Fixes: 161510ccf91c ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 1")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O'
(or 'C') flag. This happens well before it opens the interpreter. If
that open fails the flag stays set on the bprm. binfmt_misc is at the
head of the format list so an interpreter open failure that returns
-ENOEXEC lets the search fall through to a later format. This means it
runs the matched binary directly having never staged an interpreter. So
bprm->executable is NULL while have_execfd falsely claims a descriptor
is present.
Consequently, begin_new_exec() dereferences the missing executable:
would_dump(bprm, bprm->executable);
and NULL derefs. Had it not, the hand-off later in the same function
would have failed anyway. FD_ADD(0, bprm->executable) rejects a NULL
file with -ENOMEM. Both sites are past the point of no return so the
exec cannot be unwound either way.
This can be reached by unprivileged users as binfmt_misc can be mounted
in user namespaces. So a user can register an 'O' entry whose
interpreter lives on a FUSE mount, have the FUSE server fail the open
with -ENOEXEC and execute a native ELF file that matches the entry.
have_execfd only means anything alongside the executable it describes
which is not set until the interpreter has been opened and staged.
So lets raise it there, next to execfd_creds, which is already set at
that point. An open failure now leaves it clear, so the fallback format
derives credentials from the binary and emits no AT_EXECFD, as it would
for any native exec. The argv rewrite load_misc_binary() performs before
the open is still not undone. This means the binary sees the interpreter
path in argv[0] and its own path in argv[1] but that predates this
change and only became observable once the exec stopped faulting.
Link: https://patch.msgid.link/20260720-beglichen-kognitiv-organismus-5e1e55326c56@brauner
Fixes: bc2bf338d54b ("exec: Remove recursion from search_binary_handler")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
MAINTAINERS disagrees with Documentation/devicetree/bindings on Sudeep's
email address; fix the latter.
Fixes: 59e82a4237cf ("MAINTAINERS: Change Sudeep Holla's email address")
Signed-off-by: Laszlo Ersek <laszlo.ersek@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/20260720160235.36592-1-laszlo.ersek@arm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Use correct format specifier for error pointer as Coccinelle suggests:
.../fs/resctrl/monitor.c:148:8-15: WARNING: Consider using %pe to print PTR_ERR()
.../fs/resctrl/monitor.c:760:9-16: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://patch.msgid.link/b4a45de57eca6364b7df9455f9eb25aa9bab5807.1782857711.git.reinette.chatre@intel.com
|
|
On boot, fdt_scan_reserved_mem() saves each dynamically-placed
/reserved-memory subnode into a local array of size
MAX_RESERVED_REGIONS.
If the device tree defines more than MAX_RESERVED_REGIONS
dynamically-placed regions, fdt_scan_reserved_mem() writes past the
end of the local array.
Add a bounds check that logs an error and skips the excess regions,
restoring the original behavior.
Fixes: 8a6e02d0c00e ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260614133807.2165124-2-ekffu200098@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add a few more test cases for valid and incorrect DTS for
dt-check-style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260709-dts-style-checker-v5-7-fcc147cb697d@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Script judges the indentation however always suggests it is the first
line which is wrong, e.g.:
sigmastar/mstar-infinity2m.dtsi:1: [indent-unit-dts] indent unit must be 1 tab in DTS, got '\t\t'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260709-dts-style-checker-v5-6-fcc147cb697d@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
dt-check-style was not properly handling DTC directives (starting with
'/', e.g. /dts-v1/ or /include/), thus a few DTS files had false
positive like:
apm/apm-merlin.dts:1: [indent-unit-dts] indent unit must be 1 tab in DTS, got '\t\t'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260709-dts-style-checker-v5-5-fcc147cb697d@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
A few nodes do have "device_type" property which is mostly, but not always,
the first property in a device node, when applicable. Adjust the DTS
coding style rules to actually expect the device_type first and improve
the dt-check-style to handle this correctly.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260709-dts-style-checker-v5-4-fcc147cb697d@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Individual rules behave differently depending whether they handle
bindings (YAML) or DTS, but the code was focusing on type of indentation
(spaces vs tabs). That indentation is actually irrelevant in some
rules, so differentiate based on file type. This will be more relevant
in the future when more rules act differently on DTS, than on bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260709-dts-style-checker-v5-3-fcc147cb697d@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
DTS often have spaces after tabs in indentation for aligning continued
lines of comments or list properties, thus allow such cases to avoid
many false positives. What we can easily detect is a space followed by
tab or too many spaces (more than alignment).
OTOH, DTS example in YAML files does not have tabs at all and there is
already rule for that, thus there is no point to check for mixed
indentation there.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260709-dts-style-checker-v5-2-fcc147cb697d@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
DTS in the bindings (example in a YAML file) does not have tabs at all,
but regular DTS do, therefore entire check check_tab_in_dts() has
confusing name and should apply only to YAML files.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260709-dts-style-checker-v5-1-fcc147cb697d@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The max17042 binding described "maxim,cold-temp" and
"maxim,over-heat-temp" as unsigned values, but in-tree DTS examples
use negative temperatures such as a cold threshold below zero degrees.
Document the temperature properties as signed int32 values so the
schema matches existing DTS data and the driver can use signed helpers.
Assisted-by: Codex:gpt-5-5
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260612215315.1889039-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
When too many reserved memory regions are defined,
fdt_init_reserved_mem_node() logs an error and skips the region without
naming the node.
Print the node name so the skipped node can be identified, matching
fdt_scan_reserved_mem().
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260614133807.2165124-3-ekffu200098@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes. 8 are cc:stable and the remainder address post-7.1 issues
or aren't considered appropriate for backporting. 10 are for MM.
All are singletons - please see the relevant changelogs for details"
* tag 'mm-hotfixes-stable-2026-07-20-11-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory-failure: trace: change memory_failure_event to ras subsystem
mm: page_reporting: allow driver to set batch capacity
mm/kmemleak: fix checksum computation for per-cpu objects
mm/damon/core: disallow overlapping input ranges for damon_set_regions()
MAINTAINERS: add Usama as a THP reviewer
fat: avoid stack overflow warning
mm/damon/core: validate ranges in damon_set_regions()
m68k: avoid -Wunused-but-set-parameter in clear_user_page()
mm/huge_memory: set PG_has_hwpoisoned only after new folio head is established
mm/page_vma_mapped: fix device-private PMD handling
MAINTAINERS: s/SeongJae/SJ/
userfaultfd: prevent registration of special VMAs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
- Fix potential crash in rhashtable walk
* tag 'v7.2-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
rhashtable: clear stale iter->p on table restart
|
|
Screen garbage or flickering can be observed during mode changes (such
as VT switches) on systems using the AUO B116XAK01.6 and B140XTK02.4
panels.
This occurs because the backlight is enabled before the video signal
stabilizes. Waveform measurements show that the panel signal takes
around 140ms to stabilize after a mode change, meaning the previous 50ms T8
timing was insufficient.
To resolve this issue, adjust the eDP panel delay entry from
delay_200_500_e50 to delay_200_500_e200 (increasing T8 from 50ms to 200ms).
This matches the updated panel specifications from AUO, which now formally
define T8 as 200ms to mask any display abnormalities during mode changes.
Signed-off-by: Dio Zhang <dioyc_zhang@compal.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260720025358.2781136-1-dioyc_zhang@compal.corp-partner.google.com
|
|
In HFS+ filesystems, during b-tree open (hfs_btree_open()), the code
verifies that the allocation map bit for the tree header (node 0) is
set. If not, it indicates a corrupted map record/bitmap and mounts
the volume as read-only (SB_RDONLY) to prevent further damage.
HFS filesystems share the same b-tree structure but currently lack
this corruption detection check.
Port this check to HFS, aligning its implementation with HFS+ to
maintain consistent b-tree logic across both filesystems:
1. Define struct hfs_bmap_ctx, and define HFS_TREE_HEAD and the relevant
map record indices in include/linux/hfs_common.h.
2. Port the necessary offset and length validation helpers to
fs/hfs/btree.h as static inline functions with robust null pointer
checks.
3. Implement static hfs_bmap_get_map_page() in fs/hfs/btree.c.
4. Implement static hfs_bmap_test_bit() in fs/hfs/btree.c to inspect
the B-tree bitmap using the get_map_page helper.
5. Implement static hfs_bmap_clear_bit() in fs/hfs/btree.c.
6. Rewrite hfs_bmap_alloc() in fs/hfs/btree.c to use the unified
hfs_bmap_get_map_page() helper, eliminating redundant page and offset
calculation code.
7. Refactor hfs_bmap_free() in fs/hfs/btree.c to use the new
hfs_bmap_clear_bit() helper.
8. In hfs_btree_open(), retrieve the header node via hfs_bnode_find(),
test its allocation bit with hfs_bmap_test_bit(), and release it
using hfs_bnode_put().
Suggested-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/all/6a36101b.be22b350.2a3e9.0001.GAE@google.com/T/#r446d0fed2a2900bd805534bbcb799d86619ae2ea
Signed-off-by: Aditya Prakash Srivastava <aditya.ansh182@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260716074150.1660-1-aditya.ansh182@gmail.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
The registered robust-list head has static storage but points at three
automatic lock nodes. GCC warns about storing the address of a local
variable in the static head when building the selftest with -Wall.
Give the nodes static storage as well. This keeps every object in the
circular list alive through child exit without changing the list topology.
Signed-off-by: Miles Krause <mileskrause5200@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://patch.msgid.link/20260711-futex-robust-list-static-nodes-v1-1-723754d75cf5@gmail.com
|
|
Viktor Malik says:
====================
selftests/bpf: Fix compilation with RELEASE=1
When compiling BPF selftests with RELEASE=1 (which most notably adds
-O2), GCC reports several warnings. These are by default treated as
errors and abort the compilation.
This series fixes all of the issues such that selftests can be compiled
with RELEASE=1.
====================
Link: https://patch.msgid.link/cover.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
When compiling BPF selftests with -O2, GCC reports a maybe-uninitialized
warning in libarena code:
In file included from /bpf-next/tools/testing/selftests/bpf/prog_tests/libarena_asan.c:11:
In function ‘libarena_asan_init’,
inlined from ‘run_test’ at /bpf-next/tools/testing/selftests/bpf/prog_tests/libarena_asan.c:59:8,
inlined from ‘test_libarena_asan’ at /bpf-next/tools/testing/selftests/bpf/prog_tests/libarena_asan.c:91:2:
/bpf-next/tools/testing/selftests/bpf/libarena/include/libarena/userspace.h:126:14: error: ‘globals_pages’ may be used uninitialized [-Werror=maybe-uninitialized]
126 | args = (struct asan_init_args){
| ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
127 | .arena_all_pages = arena_all_pages,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
128 | .arena_globals_pages = globals_pages,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
129 | };
| ~
/bpf-next/tools/testing/selftests/bpf/libarena/include/libarena/userspace.h: In function ‘test_libarena_asan’:
/bpf-next/tools/testing/selftests/bpf/libarena/include/libarena/userspace.h:118:13: note: ‘globals_pages’ was declared here
118 | u64 globals_pages;
| ^~~~~~~~~~~~~
Silence the warning by initializing globals_pages to 0.
Fixes: cfc00618b9df ("selftests/bpf: Add ASAN support for libarena selftests")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/9f77a5c05c3c731ab2655fd66716ab9de4478b15.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
When compiling BPF selftests with -O2, GCC reports an array bounds
violation warning in global_map_resize test:
In function ‘global_map_resize_bss_subtest’,
inlined from ‘test_global_map_resize’ at /bpf-next/tools/testing/selftests/bpf/prog_tests/global_map_resize.c:228:3:
/bpf-next/tools/testing/selftests/bpf/prog_tests/global_map_resize.c:64:33: error: array subscript 1 is above array bounds of ‘int[1]’ [-Werror=array-bounds=]
64 | skel->bss->array[i] = 1;
| ~~~~~~~~~~~~~~~~^~~
In file included from /bpf-next/tools/testing/selftests/bpf/prog_tests/global_map_resize.c:6:
./test_global_map_resize.skel.h: In function ‘test_global_map_resize’:
./test_global_map_resize.skel.h:44:21: note: while referencing ‘array’
44 | int array[1];
| ^~~~~
This is a false positive because `array` (a BPF map) has been resized
from within the BPF program. GCC doesn't know that so let us silence the
warning by accessing the array via a plain pointer.
Fixes: 08b089567573 ("libbpf: Selftests for resizing datasec maps")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/57765bc465a27923c3c093eba222cc24d08d8c40.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Replace ASSERT_OK_PTR by ASSERT_NEQ(res, NULL, ...) when checking the
result of malloc. It is more accurate since malloc returns NULL, not an
error code, on failure and it also prevents the following false GCC
warning when compiling BPF selftests with -O2:
In file included from /bpf-next/tools/testing/selftests/bpf/prog_tests/sha256.c:4:
/bpf-next/tools/testing/selftests/bpf/prog_tests/sha256.c: In function ‘test_sha256’:
./test_progs.h:393:22: error: ‘data’ may be used uninitialized [-Werror=maybe-uninitialized]
393 | int ___err = libbpf_get_error(___res); \
| ^~~~~~~~~~~~~~~~~~~~~~~~
/bpf-next/tools/testing/selftests/bpf/prog_tests/sha256.c:28:14: note: in expansion of macro ‘ASSERT_OK_PTR’
28 | if (!ASSERT_OK_PTR(data, "malloc"))
| ^~~~~~~~~~~~~
In file included from /bpf-next/tools/testing/selftests/bpf/tools/include/bpf/bpf.h:32,
from ./test_progs.h:37:
/bpf-next/tools/testing/selftests/bpf/tools/include/bpf/libbpf_legacy.h:113:17: note: by argument 1 of type ‘const void *’ to ‘libbpf_get_error’ declared here
113 | LIBBPF_API long libbpf_get_error(const void *ptr);
| ^~~~~~~~~~~~~~~~
Fixes: f09f57c74677 ("selftests/bpf: Add test for libbpf_sha256()")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/f9dec09cca0c2aa5eeb4fdcd400a13aa19e2c073.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Replace ASSERT_OK_PTR by ASSERT_NEQ(res, NULL, ...) when checking the
result of malloc. It is more accurate since malloc returns NULL, not an
error code, on failure and it also prevents the following false GCC
warning when compiling BPF selftests with -O2:
In file included from test_loader.c:6:
test_loader.c: In function ‘verify_stderr’:
/bpf-next/tools/testing/selftests/bpf/test_progs.h:393:22: error: ‘buf’ may be used uninitialized [-Werror=maybe-uninitialized]
393 | int ___err = libbpf_get_error(___res); \
| ^~~~~~~~~~~~~~~~~~~~~~~~
test_loader.c:810:14: note: in expansion of macro ‘ASSERT_OK_PTR’
810 | if (!ASSERT_OK_PTR(buf, "malloc"))
| ^~~~~~~~~~~~~
In file included from /bpf-next/tools/testing/selftests/bpf/tools/include/bpf/bpf.h:32,
from /bpf-next/tools/testing/selftests/bpf/test_progs.h:37:
/bpf-next/tools/testing/selftests/bpf/tools/include/bpf/libbpf_legacy.h:113:17: note: by argument 1 of type ‘const void *’ to ‘libbpf_get_error’ declared here
113 | LIBBPF_API long libbpf_get_error(const void *ptr);
| ^~~~~~~~~~~~~~~~
Fixes: 554e4eb9e4b7 ("selftests/bpf: Reuse stderr parsing for libarena ASAN tests")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/e25d50805fbcb3632f24b488568ab5ba49b82094.1784112948.git.vmalik@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
This test uses usleep() to delay the main thread after creating the test
thread[s] under the assumption that they already are blocked on the futex
when the main thread continues.
That "works" on otherwise idle systems, but fails under load resulting in
failed selftests because the requeue operation starts before the waiters
reached the kernel.
Replace the usleep() waits by the new thread synchronization helpers to cure that.
[ tglx: Adapted to test harness changes, fixed coding style, sanitized the
timeout handling and rewrote change log.
Co-developed-by: Edward Liaw <edliaw@google.com>
Signed-off-by: Yuwen Chen <ywen.chen@foxmail.com>
Signed-off-by: Edward Liaw <edliaw@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/tencent_76B9DE9C9FE5C57F6D74B5149970DF8CCF0A@qq.com
|
|
There are timing issues in the use of threads in some selftests for futexes
as the tests rely on timed waits to ensure that the other test thread[s]
reached the lock wait function in the kernel.
That "works" on halfways idle systems, but fails under load which results
in tests failing.
Provide a set of helper functions to create test threads and to wait for
them to reach the lock wait by monitoring /proc/$PID/wchan.
[ tglx: Fixup coding style, move the timeout into the helper, adapt to test
harness changes and massage change log ]
Signed-off-by: Yuwen Chen <ywen.chen@foxmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/tencent_4C90BE98BBC48B38B9FBC6A95C45CF49F309@qq.com
|
|
The low 32-bit ICR data is prepared by __prepare_ICR(), which returns a 32-bit
value. However, when this value is assigned to a new variable, it's easy to
mistakenly declare that variable with a different width.
To avoid this class of mistakes, use __prepare_ICR() directly as the function
argument instead of storing its result in an intermediate variable. This also
shaves off a bunch of lines in the code.
There should be no functionality change resulting from this.
Signed-off-by: Melody Wang <huibo.wang@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260708012117.177959-1-huibo.wang@amd.com
|
|
tas2563_save_calibration() assigns cali_data.total_sz before it reads the
per-device calibration data from EFI, but its error paths return without
clearing it again. cali_data.cali_reg_array is left all zero, because the
function returns before the register addresses are assigned.
On the first playback tasdev_load_calibrated_data() does
if (!data || !cali_data->total_sz)
return;
which passes, since total_sz is still non-zero. It then issues five
4-byte bulk writes to p->r0_reg, p->r0_low_reg, p->invr0_reg, p->pow_reg
and p->tlimit_reg, all of which are 0. Register 0 decodes to book 0 /
page 0 / register 0x00, so the auto-incrementing block write zeroes
registers 0x00 to 0x03. Register 0x03 is PB_CFG1, which holds AMP_LEVEL,
so the amplifier gain is set to its minimum and the speaker stays silent.
This is reproducible on a Lenovo Yoga 7 14ARB7 (two TAS2563 on I2C,
ACPI INT8866) whose factory calibration was never written to UEFI, so the
EFI read fails with EFI_NOT_FOUND. The two woofers driven by the
amplifiers are silent while the tweeters driven directly by the ALC287
play. Reading the amplifier registers over i2c shows PWR_CTL = 0x00
(active) and the TDM slots correctly programmed by the RCA profile, but
PB_CFG1 = 0x00. With this change PB_CFG1 keeps its power-on default of
0x20 and both woofers play.
tas2781_save_calibration() in tas2781_hda.c already clears total_sz on
failure; do the same for the TAS2563 variant.
Signed-off-by: Philipp Oster <philippdev5396@outlook.de>
Link: https://patch.msgid.link/20260720-tas2781-calfix-v1-1-3a5fa6ad90bc@outlook.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a codec SSID quirk for Samsung ELECTRONICS 750XBE/730XBE using
HDA_CODEC_QUIRK() instead of SND_PCI_QUIRK(), because the alsa-info
report from this device does not expose a PCI subsystem ID, only the
HDA codec subsystem ID (0x144d:0xc824) is available.
This applies ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET to fix sound
being very low and distorted on the headphone jack of this system.
Reported-by: Caio Ramos <caioramos97@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208663
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260720123702.799474-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The firmware on the Lunnen Ground 14 marks pin 0x1b as unused even
though the internal speakers are connected to it. As a result, the
speakers are not detected.
Add a pin configuration quirk for PCI subsystem ID 2782:a212 to configure
pin 0x1b as an internal speaker.
The pin configuration was tested on a Lunnen Ground 14 (DMI product LL4FA)
with an ALC269VC codec. The internal speakers and microphone work as
expected.
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Maksimov <nickstogramm@yandex.ru>
Link: https://patch.msgid.link/20260720180214.73770-1-nickstogramm@yandex.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
legacy_check and check_optimized are built by this Makefile via
TEST_GEN_PROGS_EXTENDED but are not listed in .gitignore, causing them
to show up as untracked files after a build.
Signed-off-by: Cihan Karadag <cihan.cihan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260705215346.1132764-1-cihan.cihan@gmail.com
|
|
execution
The return values of syscall_enter_from_user_mode[_work]() are
non-intuitive. Both functions return the syscall number which should be
invoked by the architecture specific syscall entry code. The returned
number can be:
- the unmodified syscall number which was handed in by the caller
- a modified syscall number (ptrace, seccomp, trace/probe/bpf)
That has an additional twist. If the return value is -1L then the caller is
not allowed to modify the return value as that indicates that the modifying
entity requests to abort the syscall and set the return value already. That
can obviously not be differentiated from a syscall which handed in -1 as
syscall number.
The most trivial way to deal with that is:
set_return_value(regs, -ENOSYS);
nr = syscall_enter_from_user_mode(regs, nr);
if (valid(nr))
handle_syscall(regs, nr);
That's what LOONGARCH, RISCV, and X86 do. But PowerPC and S390 do not
preset the return value, so when user space hands in -1 and there is
nothing setting the return value in the entry work code, then the syscall
is skipped but the return value is whatever random data has been in the
return value register.
Change the return values of syscall_enter_from_user_mode[_work]() to
boolean and return false, when either ptrace or seccomp request to skip the
syscall. If they return true, update the syscall number as it might have
been changed.
That results in slightly different behaviour of the architectures versus
tracing.
If the syscall tracepoint has probe/BPF attached, those might set the
syscall number to -1 and also set the return value. PowerPC and S390 will
then overwrite that value with -ENOSYS. The other architectures will just
ignore it like any other invalid syscall and use the modified one.
Originally-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Link: https://patch.msgid.link/20260712141346.772209074@kernel.org
|
|
This prepares for changing the return types of
syscall_enter_from_user_mode[_work]() to bool, which in turn separates the
decision of invoking the syscall from the syscall number, which might have
been changed in the call by ptrace, seccomp, tracing.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260712141346.699072205@kernel.org
|
|
Reread the syscall number from pt_regs and stop returning the eventually
modified syscall number.
That moves the reread to the end of syscall_trace_enter() and prepares for
moving it to the call site.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260712141346.639115923@kernel.org
|
