| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
rt6_route_rcv() validates the Route Information option (RFC 4191) length
against the prefix length, but both checks are off by one.
rinfo->length is the ND option length in units of 8 octets and it
*includes* the 8-byte option header, so an option carrying N bytes of
prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3
when Prefix Length is greater than 64, and 2 or 3 when it is greater
than 0. The code accepts length >= 2 and length >= 1 respectively.
ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix,
so a Router Advertisement with (prefix_len=128, length=2) or
(prefix_len=64, length=1) makes the kernel read up to 8 bytes past the
end of the option. Those bytes end up in the prefix of the route that
gets installed, so they are visible to userspace:
# RA with a Route Information option (prefix_len=128, length=2)
# followed by a source link-layer address option, 01 01 de ad be ef ca fe
$ ip -6 route show
2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra
^^^^^^^^^^^^^^^^^^ the next option, read out of bounds
When the Route Information option is the last one in the packet, those
eight bytes come from the skb tail room instead.
Reject the option lengths RFC 4191 does not allow.
Fixes: 70ceb4f53929 ("[IPV6]: ROUTE: Add experimental support for Route Information Option in RA (RFC4191).")
Cc: stable@vger.kernel.org
Signed-off-by: Yuejie Shi <syjcnss@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260730035310.74584-1-syjcnss@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__sctp_outq_flush_rtx() moves a gap-acked chunk onto another transport's
transmitted list without updating chunk->transport:
if (chunk->tsn_gap_acked) {
list_move_tail(&chunk->transmitted_list,
&transport->transmitted);
continue;
}
The chunk then sits on a live transport's list while chunk->transport still
names a different one. If that transport is removed - sctp_assoc_rm_peer()
from an ASCONF Delete-IP - sctp_transport_free() RCU-frees it and the chunk
is left with a dangling pointer. sctp_assoc_rm_peer() scrubs
peer->transmitted and asoc->outqueue.out_chunk_list, but the chunk is on
neither.
The pointer is not followed while tsn_gap_acked is set. A SACK that
reneges on the TSN clears the flag, and the next SACK reaches
tchunk->transport->flight_size -= sctp_data_size(tchunk);
inside the freed transport. KASAN reports a slab-use-after-free read in
sctp_check_transmitted(), freed from sctp_assoc_rm_peer(). Both the
removal and the SACKs come from the association peer.
Set chunk->transport at the move. The ordinary resend path needs nothing:
it reaches its list_move_tail() only after sctp_packet_append_chunk()
returned SCTP_XMIT_OK, and __sctp_packet_append_chunk() has rebound the
chunk by then.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260729160028.54546-1-baul.lee@xbow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit f5da7c45188e ("tcp: adjust rcvq_space after updating scaling
ratio") replaced the direct window_clamp update in tcp_measure_rcv_mss()
with a call to tcp_set_window_clamp(), a helper that implements the
TCP_WINDOW_CLAMP setsockopt. As a side effect, the helper also shrinks
rcv_ssthresh via __tcp_adjust_rcv_ssthresh().
As a result, each scaling_ratio decrease detected by
tcp_measure_rcv_mss() also cuts rcv_ssthresh. Elsewhere in TCP,
rcv_ssthresh is usually cut under memory pressure and grows via
tcp_grow_window().
Flows whose segment sizes vary keep scaling_ratio oscillating, which
leads to an unstable rcv_ssthresh: a dip of rcv_ssthresh only recovers
via tcp_grow_window(), keeping the advertised window at a relatively
low level even after the ratio itself has recovered, and can even stall
the sender.
Observed on a customer's proxy gateway after upgrading from kernel 6.1
to 6.12: in the worst case, rcv_ssthresh was cut in half by a
scaling_ratio dip. P99 latency jumped from <10ms on 6.1 to ~100ms on
6.12, and almost returned to the 6.1 level with this patch applied.
Restore the plain WRITE_ONCE() update of window_clamp, as introduced
in commit a2cbb1603943 ("tcp: Update window clamping condition"), and
keep the rcvq_space.space adjustment. Now rcv_ssthresh is decoupled from
scaling_ratio changes in tcp_measure_rcv_mss().
Fixes: f5da7c45188e ("tcp: adjust rcvq_space after updating scaling ratio")
Signed-off-by: Nathan Gao <zcgao@amazon.com>
Link: https://patch.msgid.link/20260725030806.28135-1-zcgao@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sunrpc_destroy_cache_detail() only cancels the global cache_cleaner
delayed_work when cache_list is empty. During per-netns teardown
cache_list is never empty because init_net's caches remain registered,
so the cancel never fires. After unlink, the caller proceeds to
cache_destroy_net() which kfrees the cache_detail while cache_clean()
may still hold a dangling pointer to it. The result is a
use-after-free: cache_dequeue() takes cd->queue_lock on freed memory,
and cache_put() dereferences cd->cache_put as a function pointer from
freed slab.
Drop the list_empty guard so that cancel_delayed_work_sync() always
runs, ensuring any in-flight cache_clean() completes before the
cache_detail is freed. Re-arm the cleaner afterwards if other caches
are still registered.
Fixes: 820f9442e711 ("SUNRPC: split cache creation and PipeFS registration")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-cache_cleaner_vs_destroy_no_sync-v1-1-a707a6fcfd32@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Individual Read segment lengths are validated at decode time, but
nothing prevents a requester from sending multiple segments whose
cumulative length exceeds the rq_pages array budget. When one
segment fills the page array exactly, the runtime guard in
svc_rdma_build_read_segment() is bypassed because len reaches zero.
A subsequent segment then accesses the NULL sentinel slot at
rq_pages[rq_maxpages], resulting in a NULL pointer dereference during
DMA mapping.
Accumulate pages across all Read segments and reject the message at
decode time when the total would overflow the page budget.
Fixes: 026d958b38c6 ("svcrdma: Add recvfrom helpers to svc_rdma_rw.c")
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Read chunk position and length validation is currently scattered
across three consumer functions: svc_rdma_read_data_item(),
svc_rdma_read_multiple_chunks(), and svc_rdma_read_call_chunk().
Each independently guards against the same class of unsigned
arithmetic underflow from untrusted wire values. Any new consumer
of the parsed Read chunk list must replicate these checks or risk
re-introducing the defects fixed by earlier patches in this series.
Add pcl_check_read_chunk_positions() to consolidate position and
length validation into a single post-decode pass, called from
svc_rdma_xdr_decode_req() after all three chunk lists have been
parsed and the inline body length is known. The pass verifies
three properties:
- Each Read chunk's inline-body offset (its unreduced-stream
position minus the cumulative length of preceding Read chunks)
falls within the inline body length, or within the Call chunk
length for interleaved reads.
- Adjacent Read chunk positions do not overlap: cumulative read
bytes at each transition do not exceed the next position.
- Each chunk length does not exceed the receive context's page
budget.
Malformed frames are rejected before reaching any consumer. The
existing consumer-side guards remain as defense in depth.
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-6-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A peer can send a Write or Reply chunk whose segcount field is zero.
xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero
passes the range check, and xdr_inline_decode(stream, 0) returns the
current (non-NULL) cursor without advancing. The function returns
true and pcl_alloc_write() then links a struct svc_rdma_chunk with
ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl.
An earlier patch in this series made pcl_for_each_segment() safe for
ch_segcount == 0, so this no longer drives the memory walk it used
to. Rejecting the malformed frame at the decode boundary is still
worthwhile as defense in depth: it keeps degenerate zero-segment
chunks off the parsed chunk lists entirely, so any future consumer
that walks ch_segments directly cannot observe one, and it makes the
zero-floor easy to backport to trees where the macro change is more
intrusive. RFC 8166 has no meaning for a Write/Reply chunk that
describes no remote buffer, so no legitimate client is affected.
xdr_check_reply_chunk() funnels Reply chunks through
xdr_check_write_chunk() and inherits the same rejection.
pcl_alloc_write() also links each chunk onto the parsed chunk list
before filling its segment array. If a future change weakens the
segcount-0 rejection, an incomplete chunk is visible to consumers
during the fill loop. Reorder so that list_add_tail() follows the
segment fill loop, ensuring only fully-populated chunks appear on
the list.
Fixes: 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data structure")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-5-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The RPC/RDMA Read list decoder stores wire-supplied segment
lengths without validation. xdr_count_read_segments() checks
4-byte alignment for non-zero position values but does not
cap the segment length.
An oversized rs_length reaches svc_rdma_build_read_segment(),
which derives nr_bvec from it and can drive a large dynamic
bvec allocation before verifying that enough rq_pages remain.
If the post-allocation page-overrun guard fires, the freshly
acquired rw context is not returned, leaking the resource.
Reject any segment whose length exceeds the receive context's
page budget during Read list decoding, consistent with how
xdr_check_write_chunk() bounds Write segment counts against
rc_maxpages. Also return the rw context on the existing
post-allocation overrun path in svc_rdma_build_read_segment(),
keeping that defensive guard balanced.
Fixes: 5ee62b4a9113 ("svcrdma: use bvec-based RDMA read/write API")
Cc: stable@vger.kernel.org
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-3-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_rdma_read_chunk_range() walks a Read chunk's segment list to
build a sub-range starting at byte offset and spanning length bytes
for a Position-Zero or Call chunk. Two arithmetic defects in the
per-segment loop produce wrong DMA lengths and a u32 underflow:
pcl_for_each_segment(segment, chunk) {
if (offset > segment->rs_length) {
offset -= segment->rs_length;
continue;
}
dummy.rs_handle = segment->rs_handle;
dummy.rs_length = min_t(u32, length,
segment->rs_length) - offset;
dummy.rs_offset = segment->rs_offset + offset;
First, the skip predicate uses '>' instead of '>='. When offset
equals the segment's full rs_length, the segment is fully consumed
and should be skipped, but the loop falls through into the body.
The resulting dummy.rs_length is min_t(u32, length, rs_length) -
rs_length, which underflows to a near-UINT_MAX u32 when length is
smaller than rs_length, or is zero otherwise.
Second, the length formula subtracts offset from the min_t() result
rather than from segment->rs_length before the cap. For offset > 0
the segment's residual is rs_length - offset, not rs_length, so the
cap must be applied to the residual. With the current bracketing,
whenever length is smaller than rs_length - offset the per-segment
length becomes length - offset instead of length, silently dropping
offset bytes from the rebuilt chunk. Combined with the boundary
case above it also enables the u32 underflow path, which propagates
a huge nr_bvec into svc_rdma_build_read_segment() and a multi-MiB
kmalloc_array_node() in svc_rdma_get_rw_ctxt().
Additionally, svc_rdma_read_call_chunk() can invoke this function
with length == 0 when the last Read chunk ends exactly at the end
of the Call chunk. With the corrected >= predicate, every segment
is skipped and the function returns the initial -EINVAL, rejecting
a valid request. Return success immediately when length is zero.
Also break out of the loop once length is fully consumed to avoid
passing zero-length segments to svc_rdma_build_read_segment().
Fix by using '>=' so a fully-consumed segment is skipped, by
moving '- offset' inside min_t() so the cap is applied to the
segment's residual length, by returning success for zero-length
requests, and by stopping iteration when the requested range has
been consumed.
Fixes: d7cc73972661 ("svcrdma: support multiple Read chunks per RPC")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-2-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The RPC/RDMA Read chunk position field is supplied by the remote
client and stored verbatim in the parsed chunk list.
xdr_count_read_segments() checks only 4-byte alignment; it never
compares the position against the received inline body length.
In the single-chunk path, svc_rdma_read_complete_one() splits the
head and tail kvecs at ch_position. A position past the inline
body underflows the tail length, exposing adjacent slab memory to
the upper XDR decoder.
In the multi-chunk path, svc_rdma_read_multiple_chunks() computes
gap lengths between chunks as unsigned subtractions from
ch_position. Overlapping Read chunks cause these subtractions to
underflow. A final position past the inline body likewise
underflows the trailing gap length. svc_rdma_copy_inline_range()
then copies past the receive buffer into request pages that are
returned to the client through the Reply channel.
Bound inline-range copies in svc_rdma_copy_inline_range() against
the decoded inline RPC body saved in rc_saved_arg. Reject a
single Read chunk positioned beyond that body, and reject
multi-chunk lists where accumulated read bytes exceed the next
chunk's position. Apply the same position and overlap checks in
the call-chunk interleaving path.
Fixes: d96962e6d0e2 ("svcrdma: Use the new parsed chunk list when pulling Read chunks")
Cc: stable@vger.kernel.org
Acked-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260526-rpc-kernel-bugs-v1-1-e251306ccca9@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_krb5_unwrap_v2() reads the EC and RRC header fields at ptr+4 and
ptr+6 before validating that the token is at least GSS_KRB5_TOK_HDR_LEN
(16) bytes long, and its rotate_left() helper passes buf->len - base
to xdr_buf_subsegment() without verifying that base <= buf->len. When
a caller hands in a sub-16-byte token, or a token whose declared len
leaves base past the end of the buffer, three distinct failures follow:
gss_krb5_unwrap_v2(offset, len, buf)
ptr = buf->head[0].iov_base + offset
ec = *(ptr + 4) /* OOB read on short head */
rrc = *(ptr + 6) /* OOB read on short head */
rotate_left(offset + 16, buf, rrc)
xdr_buf_subsegment(buf, &subbuf,
base, buf->len - base) /* u32 wrap when base > len */
_rotate_left(&subbuf, shift)
shift %= buf->len /* divide-by-zero when base == len */
After decryption, the cleanup arithmetic has the same shape:
movelen = min_t(unsigned int, buf->head[0].iov_len, len);
movelen -= offset + GSS_KRB5_TOK_HDR_LEN + headskip;
BUG_ON(offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen >
buf->head[0].iov_len);
The BUG_ON re-adds the value just subtracted, so it reduces to
min(A, B) > A and is permanently false; it cannot catch the unsigned
underflow of movelen, which then drives a ~UINT_MAX-byte memmove().
Add four defense-in-depth guards inside the unwrap core so it is safe
regardless of what its callers validate:
- reject tokens with len - offset < GSS_KRB5_TOK_HDR_LEN before
touching ptr+4/ptr+6;
- bail from rotate_left() when buf->len <= base, covering both the
underflow and zero-length cases;
- return early from _rotate_left() when buf->len is zero, so the
shift %= buf->len modulo cannot fault;
- replace the dead BUG_ON with a live check that returns
GSS_S_DEFECTIVE_TOKEN before the movelen subtraction.
Fixes: de9c17eb4a91 ("gss_krb5: add support for new token formats in rfc4121")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260524010213.557424-5-cel@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
xdr_buf_trim() trims `len` bytes from the tail of an xdr_buf by
walking the tail, pages, and head iovecs. Each per-section step
uses min_t() so it never removes more bytes than that section
holds, but the final accounting at the fix_len label subtracts the
total bytes actually consumed from buf->len without any clamp:
fix_len:
buf->len -= (len - trim);
When the caller has set buf->len to a value smaller than the sum
of the iov_lens, (len - trim) can exceed buf->len and the unsigned
subtraction wraps to near UINT_MAX. gss_krb5_unwrap_v2() reaches
xdr_buf_trim() in exactly that state:
buf->head[0].iov_len -= GSS_KRB5_TOK_HDR_LEN + headskip;
buf->len = len - (GSS_KRB5_TOK_HDR_LEN + headskip);
xdr_buf_trim(buf, ec + GSS_KRB5_TOK_HDR_LEN + tailskip);
buf->len is a small wire-derived value while the iov_lens are at
page scale, so the per-section loops legitimately consume far more
bytes than buf->len records. The wrapped buf->len then propagates
as the authoritative stream bound into every downstream XDR
decoder.
Fix by clamping the decrement so buf->len bottoms out at zero:
buf->len -= min_t(unsigned int, buf->len, len - trim);
On the normal path where the iov_lens sum to buf->len, (len - trim)
is always <= buf->len and the result is identical to before. No
callers change behavior outside the underflow case.
Fixes: 4c190e2f913f ("sunrpc: trim off trailing checksum before returning decrypted or integrity authenticated buffer")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260524010213.557424-4-cel@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_unwrap_resp_priv() validates the RPCSEC_GSS opaque length with
offset = (u8 *)(p) - (u8 *)head->iov_base;
if (offset + opaque_len > rcv_buf->len)
goto unwrap_failed;
maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset,
offset + opaque_len, rcv_buf);
Both operands are u32 and the sum is computed in u32. A reply with
opaque_len near 0xffffffff makes offset + opaque_len wrap to a small
value that is below rcv_buf->len, so the bound check passes and
gss_unwrap() is called with end < begin. The check also lacks a
lower bound, so any opaque_len in [0, GSS_KRB5_TOK_HDR_LEN) is
accepted and forwarded to gss_krb5_unwrap_v2(), whose pre-decrypt
header reads at ptr+4 and ptr+6 then run past the token.
A krb5p NFS server returning a crafted RPCSEC_GSS reply can drive
the client into out-of-bounds reads in gss_krb5_unwrap_v2() and the
rotate_left() loop that follows.
Fix by replacing the single combined check with three guards that
are safe in u32 arithmetic and that enforce the RFC 4121 minimum
outer token length:
if (offset > rcv_buf->len)
goto unwrap_failed;
if (opaque_len > rcv_buf->len - offset)
goto unwrap_failed;
if (opaque_len < GSS_KRB5_TOK_HDR_LEN)
goto unwrap_failed;
The first guard makes the subtraction in the second guard
unconditionally safe; offset is derived from a successful
xdr_inline_decode() in the head kvec, so in practice it already
satisfies the bound. The floor mirrors the server-side check added
in commit 5b757c2e57a5 ("SUNRPC: svcauth_gss: enforce krb5 token
minimum length").
Fixes: 2d2da60c63b6 ("RPCSEC_GSS: client-side privacy support")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260524010213.557424-3-cel@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svcauth_gss_unwrap_priv() validates only an upper bound on the
wire-supplied opaque length before handing the buffer to
gss_unwrap():
if (len > xdr_stream_remaining(xdr))
goto unwrap_failed;
offset = xdr_stream_pos(xdr);
...
maj_stat = gss_unwrap(ctx, offset, offset + len, buf);
The wire value `len` flows unchanged as the upper bound into the
krb5 unwrap path, so a len in [0, 16] passes this check and is
handed to gss_unwrap(). For a krb5 v2 context that lands in
gss_krb5_unwrap_v2(), which reads the 16-byte RFC 4121 token
header fields at ptr+4 and ptr+6 and then calls rotate_left()
before any integrity check. With a sub-header length the header
reads run past the token, and _rotate_left()'s `shift %= buf->len`
path can divide by zero when buf->len has been driven to zero by
the truncated token. A header-only token (len == 16) is equally
invalid: with a non-zero RRC field and the opaque blob ending at
the XDR buffer boundary, rotate_left() builds a zero-length
subbuffer, reaching the same division.
Reject the token at the server entry point before it reaches the
krb5 unwrap core. A valid sealed RFC 4121 token must contain
the 16-byte header plus at least some encrypted payload.
Fix by adding a minimum-length check immediately after the
existing upper-bound check:
if (len <= GSS_KRB5_TOK_HDR_LEN)
goto unwrap_failed;
Fixes: 7c9fdcfb1b64 ("[PATCH] knfsd: svcrpc: gss: server-side implementation of rpcsec_gss privacy")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260524010213.557424-2-cel@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_krb5_verify_mic_v2() reads the token ID at ptr[0..1], the flags
byte at ptr[2], and padding at ptr[3..7], then passes
ptr + GSS_KRB5_TOK_HDR_LEN and cksum_len to gss_krb5_mic_build_sg().
None of these accesses check read_token->len first.
The minimum safe token size is GSS_KRB5_TOK_HDR_LEN (16) plus
ctx->krb5e->cksum_len (12-24, depending on the enctype). All callers
accept shorter tokens from the wire:
- gss_unwrap_resp_integ() enforces only an upper bound
(offset + len <= rcv_buf->len) before allocating
mic.data = kmalloc(len) and passing it to gss_verify_mic().
A malicious NFS server can therefore supply a short checksum
opaque, producing a small slab allocation that the Kerberos MIC
verifier reads past.
- gss_validate() enforces only len <= RPC_MAX_AUTH_SIZE (400)
before passing the wire-supplied length to
gss_validate_seqno_mic(), which constructs a mic xdr_netobj
and calls gss_verify_mic().
- svcauth_gss_verify_header() enforces only
checksum.len >= XDR_UNIT (4 bytes) before dispatching to
gss_verify_mic().
- svcauth_gss_unwrap_integ() checks only that the checksum fits
in gsd->gsd_scratch.
Add a length guard at the top of gss_krb5_verify_mic_v2(), before any
ptr[] access or scatterlist construction. Well-formed MIC tokens from
gss_krb5_get_mic_v2() already have exactly GSS_KRB5_TOK_HDR_LEN +
cksum_len bytes, so valid traffic is unaffected.
Reported-by: Chris Mason <clm@meta.com>
Fixes: de9c17eb4a91 ("gss_krb5: add support for new token formats in rfc4121")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260523165237.510204-1-cel@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, bpf_setsockopt() and bpf_getsockopt() for SOL_IP and SOL_IPV6
only allow a small subset of socket options (such as IP_TOS,
IPV6_TCLASS, and IPV6_AUTOFLOWLABEL). Calling bpf_setsockopt() with
IP_TRANSPARENT or IPV6_TRANSPARENT fails with -EINVAL.
Transparent proxying (TPROXY) and related networking components often
rely on IP_TRANSPARENT and IPV6_TRANSPARENT to enable binding sockets
to non-local IP addresses.
Allow IP_TRANSPARENT for SOL_IP in sol_ip_sockopt() and
IPV6_TRANSPARENT for SOL_IPV6 in sol_ipv6_sockopt().
Signed-off-by: Shivaji Kant <shivajikant@google.com>
Tested-by: Anubhav Singh <anubhavsinggh@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://lore.kernel.org/bpf/20260801051307.478469-1-shivajikant@google.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
reqsk_queue_hash_req() publishes a TCP_NEW_SYN_RECV request_sock onto
the ehash chain, drops the bucket lock, and only afterwards sets
rsk_refcnt to 3.
Lockless readers such as __inet_lookup_established() handle this with
refcount_inc_not_zero(), but bpf_iter_tcp_established_batch() uses plain
sock_hold() while holding the bucket lock, on the assumption that the
lock guarantees sk_refcnt > 0. That assumption does not hold for
request_sock:
CPU 0 CPU 1
----- -----
tcp_conn_request()
reqsk_queue_hash_req()
inet_ehash_insert(req)
spin_lock(bucket)
__sk_nulls_add_node_rcu(req) // rsk_refcnt == 0
spin_unlock(bucket)
bpf_iter_tcp_established_batch()
spin_lock(bucket)
sock_hold(req) <-- addition on 0
spin_unlock(bucket)
refcount_set(&req->rsk_refcnt, 3) // clobbers saturated value
which surfaces as:
refcount_t: addition on 0; use-after-free.
WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x48/0x90, CPU#1
Call Trace:
bpf_iter_tcp_established_batch+0x14e/0x170
bpf_iter_tcp_batch+0x53/0x200
bpf_iter_tcp_seq_next+0x27/0x70
bpf_seq_read+0x107/0x410
vfs_read+0xb9/0x380
The iterator's stolen reference is lost when the publishing CPU's
refcount_set() overwrites the count, leaving the socket one reference
short. When the last legitimate owner drops its reference the reqsk is
freed while still reachable, leading to use-after-free.
This reproduces in seconds with tcp_syncookies=0, a handful of threads
doing connect()/close() to a local listener while others read an
iter/tcp link in a tight loop.
Use refcount_inc_not_zero() and skip the socket on failure. A skipped
socket is still part of the bucket, so keep counting it in expected.
The reallocations are sized from expected, and a request sock whose
refcount gets published while the lock is held across the last realloc
must already have room.
A skipped socket is counted in expected but never batched, so end_sk
can be short of expected on a batch that is actually complete. Decide
completeness by whether the walk left any socket behind instead. The
WARN after the locked realloc checks the same, replacing an
end_sk == expected check that could not hold on that path since
commit cdec67a489d4 ("bpf: tcp: Make sure iter->batch always
contains a full bucket snapshot").
If every matching socket in a bucket is mid-init (refcount 0), end_sk
stays 0. Advance to the next bucket rather than returning a batch entry
that was never filled this round.
Fixes: 04c7820b776f ("bpf: tcp: Bpf iter batching and lock_sock")
Assisted-by: Claude:unspecified
Signed-off-by: Jose Fernandez (Anthropic) <jose.fernandez@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://lore.kernel.org/bpf/20260730-bpf-iter-tcp-refcnt-v3-1-754b9c8a6717@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
ARG_CONST_SIZE does not require a constant: check_mem_size_reg() accepts
any bounded scalar and verifies the memory access against its maximum
(reg_umax). Rename ARG_CONST_SIZE and ARG_CONST_SIZE_OR_ZERO to
ARG_MEM_SIZE and ARG_MEM_SIZE_OR_ZERO to reflect that. ARG_CONST_ALLOC_
SIZE_OR_ZERO, which does require a constant, is left unchanged.
Pure rename, no functional change.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-10-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
PMSR request teardown must abort active measurements while the
wireless_dev is still present in the driver. cfg80211_leave_locked() and
cfg80211_stop_pd() already do this before invoking the driver's stop
callback, but cfg80211_stop_p2p_device() and cfg80211_stop_nan() do not.
Those helpers are also called directly by nl80211, rfkill shutdown, and
wireless_dev unregister paths. If one of these paths stops a P2P device
or NAN interface with a pending request, it removes the mac80211
subinterface from the driver first. Subsequent request cleanup cannot
reach the lower driver's abort callback, but cfg80211 frees the request
regardless. Driver state can then retain a stale request and use it when
it later reports a result.
Call cfg80211_pmsr_wdev_down() before stopping the P2P device or NAN
interface. This keeps lower-driver request state and cfg80211 request
ownership in sync for all of the helpers' callers.
Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260731071103.73563-1-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The refactor for the CSA parsing erroneously equates channel
zero and no information present, leading it to ignore a CSA
on an AP that advertises a switch to that (invalid) channel.
This leads to not disconnecting, which we should. For Intel
devices, this can lead to a firmware crash.
Fix this by using an int type for the channel number as well
as the opclass, and using a (negative) value that cannot be
encoded in the element to indicate it's not present.
Fixes: 21c3f8f95554 ("wifi: mac80211: refactor STA CSA parsing flows")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260802111213.3bc833515e40.I255c37c31ca8b0b34e351cf254e16b6071dd8fb3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Converting the station and chanctx lookups to wiphy_dereference()
was correct for the function itself but removed the rcu_read_lock()
for the later transmit, which requires it, as well. Fix that.
Found with the ap_open_poll_sta hwsim test, which reports
net/mac80211/tx.c:608 suspicious rcu_dereference_check() usage!
(and four more like it).
Fixes: 1c3f880ed00e ("wifi: mac80211: implement STA-mode peer probing")
Link: https://patch.msgid.link/20260802104010.6c09477032c4.If024b480b96bf9fe7baa821ed48b80be322d1e44@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is invoked with the wiphy mutex held, not in an RCU
critical section, fix the dereference accordingly.
Fixes: 2f925427e27a ("wifi: mac80211: estimate expected throughput if not provided by driver/rc")
Link: https://patch.msgid.link/20260802104010.94bf0862c329.I0a05bf8ab999cb737c487d79082425257e10132a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mac80211 copies cfg80211's variable-length countdown offset list into a
zero-initialized fixed-size array, leaving unused entries at zero. The
beacon branch already skips those zero entries, but the AP probe-response
branch writes through them unconditionally.
When a probe-response template has no countdown offset, the write through
an unused zero entry overwrites resp->data[0], corrupting the first byte of
the template. cfg80211 already bounds explicitly supplied non-zero offsets
in nl80211_parse_counter_offsets(), so this is a zero-sentinel bug, not an
out-of-bounds write.
Skip zero probe-response offsets, matching the beacon path.
Fixes: af296bdb8da4 ("mac80211: move csa counters from sdata to beacon/presp")
Link: https://lore.kernel.org/all/20260708195911.84365-6-enderaoelyther@gmail.com/
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260723011001.76851-1-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
nl80211_color_change() calls nl80211_parse_beacon() for the beacon_next
template, which can allocate params.beacon_next.mbssid_ies and .rnr_ies.
A parsing failure returned directly instead of using the out: cleanup,
leaking any allocations completed before the error.
Allocate the nested attribute table before parsing beacon_next. Its
allocation failure can then return before beacon data exists, while a
later parsing failure uses out: to release the parsed data.
Fixes: dc1e3cb8da8b ("nl80211: MBSSID and EMA support in AP mode")
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Assisted-by: Kimi:K3
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260731120244.82628-1-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When an AP's TWT Setup response is not acknowledged,
ieee80211_s1g_tx_twt_setup_fail() asks the driver to tear down the local
agreement and sends a TWT teardown action as the peer notification. It
uses the response SA as the destination, but
ieee80211_s1g_send_twt_setup() built that response with SA set to the
AP's address. The teardown is therefore queued with DA, SA and BSSID all
set to the AP address and never reaches the station.
The in-tree driver callbacks update local hardware state and emit no
action frame. The station receives no notification that mac80211 asked
the driver to remove the agreement and can keep following the TWT
schedule, leaving the peers' power-save state desynchronized.
Address the teardown to the response DA, the station to which the failed
response was sent. This also matches the station lookup the transmit
status path already performs on the same frame.
Fixes: f5a4c24e689f ("mac80211: introduce individual TWT support in AP mode")
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Kimi:K3
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260729173607.13340-1-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The cookie value assigned by cfg80211_assign_cookie() is guaranteed to be
non-zero. So the zero cookie value has special use in tx_control_port where
userspace can indicate dont_wait_for_ack, ie. not interested in status. The
wil6210 driver also uses the zero cookie when wil_cfg80211_mgmt_tx() is
invoked from debugfs api the driver provides so the event is also redundant
in that scenario.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-14-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The tx_control_port op was excluded from the previous commit because
a NULL cookie was affecting different behavior, ie. signalling that
no TX status is wanted.
Since cfg80211_assign_cookie() guarantees a non-zero value, cookie value
0 can be used instead. So pass 0 when dont_wait_for_ack is set, otherwise
pass value returned from cfg80211_assign_cookie() call.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-13-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The remain_on_channel, mgmt_tx, and probe_peer ops previously used
a u64 *cookie output parameter. Now that cfg80211 pre-assigns the
cookie value before invoking drivers, the parameter conveys a value
from caller to driver, not the other way around. Convert it to a
plain u64 input parameter across the ops struct (cfg80211.h),
rdev-ops.h wrappers, nl80211.c/mlme.c call sites, mac80211, and
all driver implementations.
The tx_control_port op is excluded: its cookie pointer is nullable
(passed as NULL when dont_wait_for_ack is set), so the nullable
pointer semantics are still required.
Internal mac80211 helpers ieee80211_start_roc_work() and
ieee80211_attach_ack_skb() still take u64 *cookie because they
assign to the pointee; their callers now pass &cookie to take the
address of the local value parameter.
wil6210's internal wil_p2p_listen() is also updated to take u64
cookie since it is called directly from the remain_on_channel
callback.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-12-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Now that cfg80211 pre-assigns the cookie before calling into mac80211,
stop calling ieee80211_mgmt_tx_cookie() in all affected paths:
- ieee80211_start_roc_work(): for normal ROC use the pre-assigned value
directly instead of generating a new one.
- ieee80211_attach_ack_skb(): the cookie is already set by the caller;
remove the ieee80211_mgmt_tx_cookie() call and store it in the ack
SKB as-is. This covers both mgmt_tx and probe_peer since both call
ieee80211_attach_ack_skb().
- ieee80211_mgmt_tx(): the dummy 0xffffffff assignment for the
dont_wait_for_ack case is no longer needed; cfg80211_assign_cookie()
guarantees a non-zero value which is sufficient for the internal
ROC vs mgmt-tx distinction.
- ieee80211_store_ack_skb(): same fix for the tx_control_port path.
With no remaining callers, remove ieee80211_mgmt_tx_cookie() and the
roc_cookie_counter field from struct ieee80211_local.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-3-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Having a single place for cookie assignment and keeping that
responsibility in the cfg80211 subsystem is a logical choice as it
handles the userspace nl80211 API. add_nan_func already does this:
cfg80211 calls cfg80211_assign_cookie() before invoking the driver.
Apply the same pattern to remain_on_channel, mgmt_tx, probe_peer and
tx_control_port by pre-assigning the cookie in the nl80211 command
handlers before the rdev_* call. For tx_control_port the cookie is
only pre-assigned when the caller requests an ack (cookie pointer
non-NULL).
Drivers may still overwrite the value for now; subsequent patches will
remove per-driver cookie generation.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260731123509.1975281-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit dd406779999fa2065ec6b7c4f80906b727041d2c.
Never encrypting the frames broke a number of tests that do
additional pre-authentication while already connected, and
then the frames didn't go out correctly. Whatever this was
intended to fix, this wasn't the right fix.
Fixes: dd406779999f ("wifi: mac80211: don't encrypt pre-auth (ETH_P_PREAUTH) frames")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The opts argument of the BPF conntrack kfuncs can point to a shared
map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read
opts->netns_id separately when acquiring and releasing the network
namespace reference.
The reference imbalance can occur as follows:
CPU 0 CPU 1
read opts->netns_id (-1)
skip get_net_ns_by_id()
write opts->netns_id (id)
read opts->netns_id (id)
put_net(net) /* no matching get */
The reverse transition leaks the reference. Repeating the unmatched put
can destroy a live namespace and crash later users.
The kernel reported:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700
Call Trace:
__sys_bpf+0x1662/0x50c0
__x64_sys_bpf+0x73/0xb0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception
Snapshot every input field of opts with READ_ONCE() before validating or
using it. The netns_id snapshot keeps the namespace get/put pair
balanced, while the other snapshots keep the remaining options from
changing partway through an invocation. The individual reads can still
observe an inconsistent combination during a concurrent update, but each
selected field value remains stable for that invocation.
Fixes: aed8ee7feb44 ("net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup")
Fixes: d7e79c97c00c ("net: netfilter: Add kfuncs to allocate and insert CT")
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260731160921.3245840-1-nicoyip.dev@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
sk_psock_msg_verdict() takes a socket reference for psock->sk_redir.
tcp_bpf_send_verdict() copies that pointer while holding the source socket
lock, but does not take a reference for the local copy before dropping the
lock around tcp_bpf_sendmsg_redir().
When apply_bytes keeps the cached verdict active, another sendmsg() on the
same source socket can consume the remaining bytes and release the cached
reference while the first thread still holds only the raw local pointer:
CPU 0 CPU 1
sk_redir = psock->sk_redir
apply_bytes remains nonzero
release_sock(sk)
lock_sock(sk)
apply_bytes reaches zero
psock->sk_redir = NULL
release_sock(sk)
tcp_bpf_sendmsg_redir(sk_redir)
sock_put(sk_redir)
tcp_bpf_sendmsg_redir(sk_redir)
The final sock_put() can free sk_redir before CPU 0 dereferences it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020
Read of size 8 at addr ffff888108537090 by task poc/87
Call Trace:
tcp_bpf_sendmsg_redir+0xf39/0x1020
tcp_bpf_sendmsg+0x977/0x1a50
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 85:
sk_prot_alloc+0x56/0x210
sk_clone+0x6f/0x14b0
inet_csk_clone_lock+0x24/0x740
tcp_create_openreq_child+0x25/0x2710
tcp_v4_syn_recv_sock+0x10a/0xe00
Freed by task 0:
__kasan_slab_free+0x43/0x70
slab_free_after_rcu_debug+0xa6/0x1e0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__sk_destruct+0x3da/0x540
sk_psock_destroy+0x81e/0xab0
process_one_work+0x63a/0x1070
Take a temporary socket reference while the source socket lock still
protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir()
returns. This keeps each unlocked use independent of cached-verdict
ownership.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20260719152207.2892156-1-nicoyip.dev@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net
with a held reference. When the requested namespace differs from the
current one and the reload action is not DRIVER_REINIT, the function
returns -EOPNOTSUPP without releasing the reference. Add the missing
put_net() on this error path.
Fixes: 2edd92570441 ("devlink: don't allow to change net namespace for FW_ACTIVATE reload action")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20260729080600.2427721-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The route4 classifier maintains a 16-slot fastmap cache that stores raw
struct route4_filter pointers indexed by (id, iif). The reader
(route4_classify) populates this cache via route4_set_fastmap() for every
classified packet that hits a filter. The writer (route4_delete,
route4_change) clears the cache via route4_reset_fastmap() before
RCU-deferred kfree of the filter.
This creates a UAF race:
1. Reader walks the RCU-protected bucket chain, finds filter f
2. Writer unlinks f, calls route4_reset_fastmap(), then tcf_queue_work()
3. Reader calls route4_set_fastmap() and writes f into the cache
*after* the writer's reset, caching a pointer about to be freed
4. After the RCU grace period, kfree(f) executes
5. Next classified packet on the same (id, iif) tuple hits the stale
fastmap entry and reads f->res from freed memory
Reproduced with an mdelay(100) accelerator in route4_set_fastmap() and a
concurrent add/delete stress test (provided by both zdi and Santosh).
Both triggered KASAN slab-use-after-free reports in the route4 fastmap
paths.
Fix:
Introduce a per-filter boolean dying flag to suppress stale fastmap
republishing by in-flight readers.
Fixes: 1109c00547fc ("net: sched: RCU cls_route")
Reported-by: zdi-disclosures@trendmicro.com
Reported-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Santosh Kalluri <santosh.kalluri129@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260729094411.46257-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet_frag_create() arms the fragment queue timer before inserting the
queue into the fqdir rhashtable. If the namespace fragment timeout is
zero or negative, the timer can run before the queue is published.
The timer callback then marks the queue complete, tries to remove a node
that is not in the hash table yet, and drops the anticipated hash
reference. Creation can subsequently publish the completed queue without
restoring that reference, leaving a stale hash node after the caller drops
the remaining reference.
Publish the queue first and arm the timer while holding the queue lock.
This makes timer expiry wait until the queue is visible in the hash table,
so inet_frag_kill() can remove the node and balance the hash reference.
Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Link: https://patch.msgid.link/bf66785e7c0c139d7a1900e2f01faeeab344b960.1784948849.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
br_mrp_alloc_test_skb() builds MRP test frames on an skb from
dev_alloc_skb(), which does not clear the linear data area. On the MRA
ring-role branch the sub-option TLV header is appended with
sub_tlv = skb_put(skb, sizeof(*sub_tlv));
sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
so sub_tlv->length is never written, and the two trailing alignment bytes
are appended with a bare skb_put() that does not clear them either. The
neighbouring oui and sub_opt regions are explicitly zeroed, so three
uninitialised bytes are left in every MRA MRP_Test frame that goes out.
Put the sub-option TLV header and the alignment padding in a single
skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no
payload, so the zeroed length field is already the value it should have.
Fixes: f7458934b079 ("net: bridge: mrp: Update the Test frames for MRA")
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260729131941.10254-1-baul.lee@xbow.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 uses the KSZ9893 DSA TAG driver. However, the KSZ8463 doesn't
use the tail tag to convey timestamps to the host as KSZ9893 does. It
uses the reserved fields in the PTP header instead.
Add a KSZ8463-specific DSA_TAG driver to handle KSZ8463 timestamps.
There is no information in the tail tag to distinguish PTP packets from
others so use the ptp_classify_raw() helper to find the PTP packets and
extract the timestamp from their PTP headers.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260727-ksz-new-ptp-v3-8-caba39e680e3@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8795 and KSZ9893 have very similar tag handling in the xmit path,
leading to code duplication.
There are only two differences between the two ksz*_xmit():
- the KSZ8795 doesn't handle priorities between frames
- ksz8795_xmit() directly returns the SKB instead of calling
ksz_defer_xmit(). Yet, ksz_defer_xmit() also returns directly the SKB
if no clone is present inside the SKB. Clones are only created by the KSZ
driver when the PTP feature is enabled. Since KSZ8795 doesn't support
PTP, returning the SKB directly or ksz_defer_xmit() is the same.
The upcoming support for the KSZ8463 also requires a similar xmit().
Gather the common code from ksz8795_xmit() and ksz9893_xmit() into a new
ksz_common_xmit() function that takes three input arguments:
- do_tstamp to tell whether ksz_xmit_timestamp() should be called
- prio to give the priority tag (if any)
- override_mask to give the location of the override bit (if any)
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260727-ksz-new-ptp-v3-7-caba39e680e3@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Upcoming patch reduces code duplication between KSZ8795 and KSZ9893 by
introducing a common xmit() function. This rework needs the KSZ8795
handlers to be implemented below ksz_defer_xmit().
Do the move now to reduce the noise in next patch.
No functionnal change is intended in this patch.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260727-ksz-new-ptp-v3-6-caba39e680e3@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
smc_llc_event_handler()
The SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT branch in
smc_llc_event_handler() stores an incoming qentry into the local LLC flow
without first checking whether a qentry is already pending. If a malicious or
buggy peer sends a second CONFIRM_LINK or ADD_LINK_CONT request while a flow is
active and flow->qentry is already set, smc_llc_flow_qentry_set() overwrites the
pointer without freeing the previous allocation, leaking one kmalloc-96 object
per spurious message.
The sibling SMC_LLC_DELETE_LINK branch already has the correct !flow->qentry
guard. Apply the same guard to the CONFIRM_LINK/ADD_LINK_CONT branch so that a
duplicate message when qentry is already occupied falls through to break and is
freed by the kfree(qentry) at the out: label, rather than silently leaking the
existing allocation.
The response direction (smc_llc_rx_response()) is unaffected: it already guards
with flow->qentry at the equivalent site and drops duplicate responses
correctly.
Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow")
Signed-off-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Reviewed-by: Hidayath Khan <hidayath@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260729130153.970800-1-mjambigi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sashiko notes that playing games with the skb dst and rt
flags instead of providing hooknum is not a good idea
when validating the checksums.
Also, skipping checksum validation for FORWARD packets
risk silent data corruption, even if the only user is
the FTP-CMD packets coming from the real server.
Sashiko also noticed that by using common checksum
helper in the previous commit we actually fixed old bug
where the TCP/UDP checksum for IPv6 on CHECKSUM_COMPLETE
was not validated correctly.
Fixes: e876b75b9020 ("ipvs: fix the checksum validations")
Link: https://sashiko.dev/#/patchset/20260722211420.153933-1-pablo%40netfilter.org
Link: https://sashiko.dev/#/patchset/20260727185024.67534-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260728202520.59179-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sashiko warns that local attacker can modify the packet
while it is processed by IPVS. Some places read the
IP ihl field multiple times which can cause out-of-bounds
access. One such place is ip_vs_nat_icmp where we
can write after the validated area.
Fix it by providing ciph argument just like it is done for
IPv6 and use ciph->len as offset to the embedded transport
header.
Modify some IPv4 header checks by reading the ihl field
only once.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://sashiko.dev/#/patchset/20260722101517.36313-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In the initial ipset rhashtable conversion RFC series syzbot reported
following splat:
BUG: sleeping function [..] at kernel/irq_work.c:289
in_atomic(): 1, [..]
irq_work_sync.. kernel/irq_work.c:289
rhashtable_free_and_destroy.. lib/rhashtable.c:1295
hash_netport4_destroy.. net/netfilter/ipset/ip_set_hash_gen.h:420
ip_set_destroy_set_rcu.. net/netfilter/ipset/ip_set_core.c:1169
rcu_core.. kernel/rcu/tree.c:2897
This is because post-rhashtable-conversion hash implementation needs
to schedule in the destroy callback. At this time this isn't allowed.
Replace existing call_rcu() based destruction with rcu_work api.
Also allows to undo split of set destruction and gc work cancelling in
a future patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Reduces size of upcoming rhashtable conversion.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Preparation patch. Once the ipset hash table is replaced with rhashtable
these functions are needed. Add them in extra commit to have reviewable
chunks.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The hash types do not acquire set->lock, they use 'region locking' where
only part of the hash table is locked. Parallel inserts and deletes are
possible and CPUs can race on ->ext_size update. Switch to atomic64_t.
This leaves another bug unresolved: there still can be a race on
comment extension re-init. This will be handled in a later commit
when converting to rhashtable backend.
Fixes: f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
According to sashiko, the current bookkeeping of cidr values are unsafe
on weakly-ordered architectures. Replace the in-place updating with an
RCU based method: create the new bookeeping structure, update and replace
the old one with the new. Downside that we need to allocate memory when
deleting a cidr entry - in case of memory pressure fall back to leave holes
which possibility is taken into account at evaluation time.
Thanks to Pablo (Pablo Neira Ayuso <pablo@netfilter.org>) and Cyntia
(Cynthia <cynthia@kosmx.dev>) for helping me in debugging which resulted
the patch "netfilter: ipset: allocate the proper memory for the generic
hash structure" on which this very patch depends.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_log_unregister() runs after the per-net teardown so its final RCU
grace period also drains readers that obtained the logger from a per-net
binding. However, ebt_nflog passes an explicit ULOG log type to
nf_log_packet() without holding a reference on the selected logger module,
unlike the xt_NFLOG and nft_log frontends.
An ebtables nflog rule can therefore remain callable while nfnetlink_log
is unloaded. The resulting interleaving is:
CPU 0 CPU 1
nfnetlink_log_fini()
unregister_pernet_subsys()
kfree(nfnl_log_pernet(net))
ebt_nflog_tg()
nf_log_packet()
nfulnl_log_packet()
instance_lookup_get_rcu()
The global ULOG logger is still registered at this point, so CPU 1
dereferences the per-net state after CPU 0 has freed it. KASAN reported:
BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu
Read of size 8 at addr ff110001052e6210 by task poc/92
Call Trace:
instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log]
nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log]
nf_log_packet+0x204/0x300
ebt_nflog_tg+0x351/0x550
ebt_do_table+0xedf/0x22b0
Allocated by task 90:
__kmalloc_noprof+0x186/0x470
ops_init+0x6d/0x420
register_pernet_operations+0x2f6/0x670
register_pernet_subsys+0x23/0x40
Freed by task 93:
kfree+0x131/0x3c0
ops_undo_list+0x3e3/0x700
unregister_pernet_operations+0x232/0x490
unregister_pernet_subsys+0x1c/0x30
nfnetlink_log_fini+0x34/0x450 [nfnetlink_log]
Acquire the ULOG logger module reference when an ebt_nflog rule is
validated and release it when the rule is destroyed. Request the NFLOG
backend for legacy callers when needed, matching xt_NFLOG. This prevents
module teardown until all ebt_nflog rules have stopped using the logger.
Fixes: c83fa19603bd ("netfilter: nf_log: don't call synchronize_rcu in nf_log_unset")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
IPVS estimator kthread 0 starts with zeroed chain and tick limits until
its initial calculation phase completes. If network namespace teardown
clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return
without installing positive limits.
The kthread can then continue into its main loop and drain
est_temp_list with zero chain_max, tick_max and est_max_count values.
Each enqueue consumes one available tick row, but est_count never
reaches the zero est_max_count value. After all rows are consumed, the
row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes
past the ticks and tick_len arrays.
Exit kthread 0 after the calculation phase if the kthread is stopping or
IPVS has been disabled. That keeps temporary estimators from being
drained after the limits failed to initialize.
Estimator kthreads can now self-exit before teardown or reload stops
kd->task. Keep an extra task reference after creation and release it
with kthread_stop_put(), so kd->task remains valid until the stop paths
consume that reference.
Fixes: 705dd3444081 ("ipvs: use kthreads for stats estimation")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
