| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/75af23a89adf881a0895d511775e4770da367cbf.1780873427.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
john1988 and Noam Rathaus reported that vti6_init_net() does not set the
netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0).
Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel)
correctly set this flag during their fallback device initialization to
prevent them from being moved to another network namespace.
Fixes: 61220ab34948 ("vti6: Enable namespace changing")
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20260608155918.787644-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When ndo_set_rx_mode_async returns an error, schedule a retry with
exponential backoff (1s, 2s, 4s, 8s -- 15s total). Give up after the
4th retry and log an error via netdev_err().
This moves retry logic from individual drivers into the core stack.
Timer callback does not hold a ref on dev. Safe because the timer can
only be armed when dev is IFF_UP, and __dev_close_many runs
timer_delete_sync before clearing IFF_UP. Unregister always closes
IFF_UP devices first, so by the time dev can be freed the timer is
dead and cannot be re-armed.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260608154014.227538-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF
chunk can hold the ADDIP header and a parameter header, then calls
af->from_addr_param(), which reads the full address (16 bytes for IPv6)
trusting the parameter's declared length.
An unauthenticated peer can send a truncated trailing ASCONF chunk that
declares an IPv6 address parameter but stops after the 4-byte parameter
header; reached from the no-association lookup path, from_addr_param() then
reads uninitialized bytes past the parameter.
Impact: an unauthenticated SCTP peer makes the receive path read up to 16
bytes of uninitialized memory past a truncated ASCONF address parameter.
The sibling __sctp_rcv_init_lookup() bounds parameters with
sctp_walk_params(); this path open-codes the fetch and omits the bound.
Verify the whole address parameter lies within the chunk before
from_addr_param() reads it, the same class of fix as commit 51e5ad549c43
("net: sctp: fix KMSAN uninit-value in sctp_inq_pop").
Fixes: df2185771439 ("[SCTP]: Update association lookup to look at ASCONF chunks as well")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260608122234.459098-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and
then lowers outcnt. That leaves removed stream metadata behind, so a
later re-add can reuse a stale ext and hit a null-pointer dereference in
the scheduler get path.
Fix the rollback by tearing down the removed stream state the same way
other stream resizes do. Unschedule the current scheduler state, drop
the removed stream ext state with sctp_stream_outq_migrate(), and then
reschedule the remaining streams.
This keeps scheduler-private RR/FC/PRIO lists consistent while fully
rolling back denied outgoing stream additions.
Fixes: 637784ade221 ("sctp: introduce priority based stream scheduler")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/d78954ecd94954653ee299400e98d74a03a6f7d3.1780603399.git.bronzed_45_vested@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the use of "pcbc(des)" in rxkad_decrypt_ticket() is the only
remaining user of the crypto API "pcbc" template, just implement
DES-PCBC by locally implementing PCBC mode on top of the DES library.
Note that only the decryption direction is needed.
This will allow support for the obsolete PCBC mode to be removed from
the crypto API.
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-4-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the local implementation of FCrypt-PCBC instead of the crypto API
one. This will allow the crypto API one to be removed. It also
simplifies the code quite a bit.
The local FCrypt-PCBC implementation is also significantly faster than
the crypto API one, since the crypto API one had a lot of overhead. For
example, benchmarking on an x86_64 CPU, I see that FCrypt-PCBC
decryption throughput improved from 83 MB/s to 157 MB/s.
(Meanwhile, AES-256-GCM decryption is 8064 MB/s on the same CPU.
Clearly, anyone looking for good performance, or anything that is
actually secure for that matter, needs to look elsewhere anyway.)
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a local implementation of FCrypt-PCBC encryption and decryption.
This will be used instead of the crypto API one, allowing the crypto API
one to be removed. It will also simplify rxkad.c quite a bit.
A KUnit test is included. The FCrypt-PCBC test vectors are borrowed
from the existing ones in crypto/testmgr.h. Note that this adds the
first KUnit test for net/rxrpc/, which previously had no KUnit tests.
The FCrypt code is based on crypto/fcrypt.c, but I simplified it a bit.
The PCBC part is straightforward and I just wrote it from scratch.
Tested with:
kunit.py run --kunitconfig net/rxrpc/
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-2-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or
sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state
across transport teardown, pinning svc_xprt references and
blocking svc_rdma_free().
The close path sets XPT_CLOSE before invoking xpo_detach and both
wait_event predicates include an XPT_CLOSE term, but the
predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has
no completion-driven wake path; it is advanced solely by the
chained ticket handoff inside svc_rdma_sq_wait() itself. Without
an explicit wake at close, parked threads never observe
XPT_CLOSE, hold their svc_xprt_get reference forever, and
svc_rdma_free() blocks on xpt_ref dropping to zero.
Two close entry points reach this transport. Local teardown runs
svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() ->
xpo_detach() on a worker thread. A remote disconnect arrives at
svc_rdma_cma_handler(), which calls svc_xprt_deferred_close():
that sets XPT_CLOSE and enqueues the transport but does not
access either RDMA waitqueue, so a worker already parked in
svc_rdma_sq_wait() never re-evaluates its predicate. With every
worker parked on this transport, no thread is available to run
the local teardown either, and the wake site there is
unreachable.
Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper
that calls svc_xprt_deferred_close() and then wakes both
sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers
that called svc_xprt_deferred_close() directly:
svc_rdma_cma_handler(), qp_event_handler(),
svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop
path, the rw completion error paths, and the recvfrom flush and
read-list error paths.
Wake both waitqueues from svc_rdma_detach() as well. The
synchronous svc_xprt_close() path (backchannel ENOTCONN, device
removal via svc_rdma_xprt_done) reaches detach without flowing
through svc_xprt_deferred_close() and therefore does not invoke
the new helper.
Fixes: ccc89b9d1ed2 ("svcrdma: Add fair queuing for Send Queue access")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
[ cel: add svc_rdma_xprt_deferred_close() to complete the fix ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When wait_for_completion_interruptible_timeout() in
svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and
tls_handshake_cancel() then returns false, handshake_complete() has
won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and
is about to invoke svc_tcp_handshake_done(), but the callback's
side effects on xpt_flags and on svsk->sk_handshake_done have not
yet committed.
The current code reads xpt_flags immediately to decide whether the
session succeeded. Two races result.
If the callback has executed set_bit(XPT_TLS_SESSION) but not yet
clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session,
enqueues the transport, and returns. svc_xprt_received() then
clears XPT_BUSY, a worker thread picks the transport up, the
dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set,
and xpo_handshake is invoked a second time. That svc_tcp_handshake()
calls init_completion(&svsk->sk_handshake_done) while the original
callback concurrently calls complete_all() on it, corrupting the
embedded swait_queue.
If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet
entered svc_tcp_handshake_done(), svc_tcp_handshake() reads
XPT_TLS_SESSION as clear and tears the connection down even though
the handshake is about to succeed.
Wait for the callback to commit before inspecting xpt_flags. The
completion is guaranteed to fire because handshake_complete()
invokes svc_tcp_handshake_done() unconditionally once it has set
HANDSHAKE_F_REQ_COMPLETED.
Fixes: b3cbf98e2fdf ("SUNRPC: Support TLS handshake in the server-side TCP socket code")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_tcp_handshake() stores the raw svc_xprt pointer in
tls_handshake_args.ta_data and submits the request through
tls_server_hello_x509(). The handshake core takes only
sock_hold(req->hr_sk); nothing references the embedding struct
svc_sock that svc_tcp_handshake_done() reaches via container_of().
Two close races leave the in-flight callback writing through a freed
svc_sock. svc_sock_free() calls tls_handshake_cancel() and discards
its return value: a false return means handshake_complete() has
already set HANDSHAKE_F_REQ_COMPLETED but hp_done() may not have
finished, yet svc_sock_free() proceeds to kfree(svsk). The
cancel-loser fall-through inside svc_tcp_handshake() itself produces
the same window: when wait_for_completion_interruptible_timeout()
returns <= 0 (timeout or signal) and tls_handshake_cancel() returns
false, the function does not drain, returns, and svc_handle_xprt()
calls svc_xprt_received(), which clears XPT_BUSY and can drop the
last reference. A concurrent close then runs svc_sock_free() while
svc_tcp_handshake_done() is still updating xpt_flags and walking
svsk->sk_handshake_done.
The corruption surfaces as set_bit/clear_bit RMW into the freed
xpt_flags slab slot and as complete_all() walking and writing the
freed wait_queue_head_t list embedded in sk_handshake_done -- a
slab-corruption primitive, not a benign read. The path is reachable
on any TLS-enabled NFS server whenever a connection close overlaps
the tlshd downcall delivery window; the interruptible wait means
signal delivery suffices, not just SVC_HANDSHAKE_TO expiry.
Take svc_xprt_get(xprt) immediately before tls_server_hello_x509()
so the in-flight callback owns its own reference. Release it on the
two edges where the callback is guaranteed not to fire -- submission
failure from tls_server_hello_x509() and a successful
tls_handshake_cancel() -- and at the tail of
svc_tcp_handshake_done() after complete_all().
Fixes: b3cbf98e2fdf ("SUNRPC: Support TLS handshake in the server-side TCP socket code")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Mason <clm@meta.com>
Assisted-by: kres (claude-opus-4-7)
[cel: rewrote commit message to describe the actual change]
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The svc_release_rqst() function executes the callback inside
rqstp->rq_procinfo->pc_release. However, if a worker thread begins
processing a new request and encounters an early error path (e.g.,
unsupported protocol, short frame, or bad auth) before a valid
rq_procinfo is installed, a stale release hook can be re-triggered
against reused state from the previous RPC, resulting in a double-free
or use-after-free vulnerability.
Harden the lifecycle of rq_procinfo by:
1. Ensuring svc_release_rqst() always clears rq_procinfo after the
optional pc_release() call, regardless of whether the hook exists.
2. Explicitly clearing rq_procinfo at request entry in svc_process()
before any early decode or drop paths.
3. Ensuring svc_process_bc() does the same at backchannel entry.
This guarantees that error flows will not encounter a non-NULL stale
rq_procinfo pointer when there is nothing to release.
Fixes: d9adbb6e10bf ("sunrpc: delay pc_release callback until after the reply is sent")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Suggested-by: Chuck Lever <cel@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
xdr_buf_to_bvec() returns a slot count even when the caller's bvec
budget is exhausted partway through the xdr_buf. Callers feed that
count into iov_iter_bvec() and continue as if the conversion had
succeeded, silently sending or writing fewer bytes than the data
length declares. For an NFS WRITE the server reports the truncated
transfer to the client as full success.
The overflow represents an internal invariant violation: a higher
layer reserved a bvec budget too small for the xdr_buf it then
asked the encoder to convert. That is a server-side fault, not a
media I/O failure and not a malformed client argument.
Change xdr_buf_to_bvec() to return a signed int and have the
overflow label return -ESERVERFAULT. Update the three callers to
detect the negative return and fail the request: nfsd_vfs_write()
folds the error into host_err, which nfserrno() translates to
nfserr_serverfault for the WRITE reply; svc_udp_sendto() and
svc_tcp_sendmsg() propagate the error out of the send path.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 2eb2b9358181 ("SUNRPC: Convert svc_tcp_sendmsg to use bio_vecs directly")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
xdr_buf_to_bvec() writes a bio_vec into the caller's array before
testing whether that slot is in range, and the head branch performs
the store with no check at all. When the caller's budget is exactly
used up, the next store lands one element past the end of the array.
The overflow label returns count - 1, which masks the surplus store
but cannot undo it.
rq_bvec, the array passed by nfsd_vfs_write(), is allocated to
exactly rq_maxpages entries with no slack. The OOB store can land in
adjacent slab memory; the bv_len and bv_offset fields written there
are derived from client-supplied RPC payload sizes.
Move the in-range check ahead of the store in the head, page-loop,
and tail branches. With the check at the top of each sequence, count
is incremented only after a successful store, so the overflow label
can return count directly.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 2eb2b9358181 ("SUNRPC: Convert svc_tcp_sendmsg to use bio_vecs directly")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Jonathan Flynn reports that commit 18755b8c2f24 ("svcrdma: Use
contiguous pages for RDMA Read sink buffers") regresses NFS/RDMA
WRITE throughput from 73.9 GiB/s to 30.3 GiB/s on a 128-core
single-NUMA-node server driving dual 400Gb/s links with 640 nfsd
threads. Server CPU utilization rises from 8.5% to 76%, with
roughly three quarters of all cycles spent spinning on zone->lock.
The sink buffers are allocated as high-order page blocks, split
into single pages so each sub-page carries an independent refcount,
and later released one page at a time through folio batches. The
per-CPU page caches cannot satisfy an allocation stream whose alloc
order differs from its free order, so every sink buffer page makes
a round trip through the buddy allocator's free lists, serialized
on the zone lock of the single NUMA node. The rq_pages entries that
the split pages displace, bulk-allocated moments earlier by
svc_alloc_arg(), are freed without ever being used, doubling the
allocator traffic.
The regression cannot be addressed trivially. Revert the commit
now; a reworked approach can return in an upcoming merge window.
Reported-by: Jonathan Flynn <jonathan.flynn@hammerspace.com>
Reported-by: Mike Snitzer <snitzer@kernel.org>
Closes: https://lore.kernel.org/linux-nfs/aiHlPmeZq3WgMwoJ@kernel.org/
Closes: https://lore.kernel.org/linux-nfs/3cb119b4b2a8aada30c0c60286778a54@mail.gmail.com/
Fixes: 18755b8c2f24 ("svcrdma: Use contiguous pages for RDMA Read sink buffers")
Cc: stable@vger.kernel.org
Tested-by: Jonathan Flynn <jonathan.flynn@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Send completion currently queues a work item to an unbound
workqueue for each completed send context. Under load, the
Send Completion handlers contend for the shared workqueue
pool lock.
Replace the workqueue with a per-transport lock-free list
(llist). The Send completion handler appends the send_ctxt
to sc_send_release_list and does no further teardown. The
nfsd thread drains the list in xpo_release_ctxt between
RPCs, performing DMA unmapping, chunk I/O resource release,
and page release in a batch.
This eliminates both the workqueue pool lock and the DMA
unmap cost from the Send completion path. DMA unmapping can
be expensive when an IOMMU is present in strict mode, as
each unmap triggers a synchronous hardware IOTLB
invalidation. Moving it to the nfsd thread, where that
latency is harmless, avoids penalizing completion handler
throughput.
The nfsd threads absorb the release cost at a point where
the client is no longer waiting on a reply, and natural
batching amortizes the overhead when completions arrive
faster than RPCs complete.
A self-enqueue backstops drain on a quiescing transport.
When svc_rdma_send_ctxt_put() observes that its llist_add()
transitions sc_send_release_list from empty to non-empty,
it sets XPT_DATA and calls svc_xprt_enqueue() so that
svc_xprt_ready() schedules an nfsd thread. The thread
enters svc_rdma_recvfrom(), finds no pending receive,
clears XPT_DATA, and returns 0; svc_xprt_release() then
runs xpo_release_ctxt and drains the list. Under steady
load the foreground drain keeps the list non-empty between
adds and no enqueue fires; only the trailing edge of a
burst pays for a wakeup. Without this path, a Send
completion arriving after the last xpo_release_ctxt on an
idle connection would leave the send_ctxt's DMA mappings
and reply pages pinned until the next RPC, send-context
exhaustion, or transport close.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Each RDMA Send completion triggers a cascade of work items on the
svcrdma_wq unbound workqueue:
ib_cq_poll_work (on ib_comp_wq, per-CPU)
-> svc_rdma_send_ctxt_put -> queue_work [work item 1]
-> svc_rdma_write_info_free -> queue_work [work item 2]
Every transition through queue_work contends on the unbound
pool's spinlock. Profiling an 8KB NFSv3 read/write workload
over RDMA shows about 4% of total CPU cycles spent on this
lock, with the cascading re-queue of write_info release
contributing roughly 1%.
The initial queue_work in svc_rdma_send_ctxt_put is needed to
move release work off the CQ completion context (which runs on
a per-CPU bound workqueue). However, once executing on
svcrdma_wq, there is no need to re-queue for each write_info
structure. svc_rdma_reply_chunk_release already calls
svc_rdma_cc_release inline from the same svcrdma_wq context,
and svc_rdma_recv_ctxt_put does the same from nfsd thread
context.
Release write chunk resources inline in
svc_rdma_write_info_free, removing the intermediate
svc_rdma_write_info_free_async work item and the wi_work
field from struct svc_rdma_write_info.
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Tested-by: Jonathan Flynn <jonathan.flynn@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The migration to crypto/krb5 eliminated the per-enctype
function dispatch and direct crypto API usage, leaving
behind a number of orphaned definitions.
Remove the following from gss_krb5.h:
- GSS_KRB5_K5CLENGTH, used only by removed key derivation
- KG_TOK_MIC_MSG and KG_TOK_WRAP_MSG (Kerberos v1 token
types; v1 support was dropped earlier)
- KG2_TOK_INITIAL and KG2_TOK_RESPONSE (context
establishment token types; no remaining users)
- KG2_RESP_FLAG_ERROR and KG2_RESP_FLAG_DELEG_OK
- enum sgn_alg and enum seal_alg (v1 algorithm constants)
- All CKSUMTYPE_* definitions, now duplicated by
KRB5_CKSUMTYPE_* in <crypto/krb5.h>
- The KG_ error constants from gssapi_err_krb5.h, which
have no remaining users
- The ENCTYPE_* constant block, replaced by KRB5_ENCTYPE_*
from <crypto/krb5.h>
- KG_USAGE_SEAL/SIGN/SEQ (3DES usage constants)
- KEY_USAGE_SEED_CHECKSUM/ENCRYPTION/INTEGRITY, duplicated
by <crypto/krb5.h>
- #include <crypto/skcipher.h>, no longer needed
Remove the cksum[] field from struct krb5_ctx in
gss_krb5_internal.h; no code reads or writes it after the
key derivation removal.
Switch gss_krb5_enctypes[] in gss_krb5_mech.c to the
canonical KRB5_ENCTYPE_* names from <crypto/krb5.h>.
Remove stale #include directives:
- <crypto/skcipher.h> from gss_krb5_wrap.c
- <linux/random.h> and <linux/crypto.h> from
gss_krb5_seal.c
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
With all per-message crypto operations now routed through
crypto/krb5, rpcsec_gss_krb5 no longer calls individual
crypto algorithms directly. The CRYPTO_KRB5 symbol already
selects CRYPTO_SKCIPHER and CRYPTO_HASH (the latter
transitively via CRYPTO_HMAC).
Drop the top-level select CRYPTO_SKCIPHER and select
CRYPTO_HASH from RPCSEC_GSS_KRB5, as these are redundant
with CRYPTO_KRB5's own dependencies.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1,
RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA, and
RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2 Kconfig options
originally gated both algorithm availability and the
advertised enctype list. Now that per-message crypto
operations are routed through crypto/krb5, these options
control only which enctype numbers appear in the gssd
upcall string; the underlying algorithms are always
present.
Remove the per-enctype Kconfig options and replace the
ifdef-gated enctype table with a candidate list looked
up in the crypto/krb5 enctype table at module init
time. Each enctype is included in the advertised list
only if crypto_krb5_find_enctype() finds it in the
library's enctype table. When a new enctype is added
to crypto/krb5, adding its constant to the candidate
array is sufficient to begin advertising it.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
With all per-message crypto operations routed through crypto/krb5,
a substantial body of code in rpcsec_gss_krb5 has no remaining
callers. The internal key derivation functions (krb5_derive_key_v2,
krb5_kdf_hmac_sha2, krb5_kdf_feedback_cmac) and the low-level
crypto primitives (krb5_encrypt, gss_krb5_checksum, krb5_cbc_cts_
encrypt/decrypt, krb5_etm_checksum) are unreachable because their
only call sites were the per-enctype function pointers removed in
previous patches. Delete gss_krb5_keys.c entirely and strip the
dead functions from gss_krb5_crypto.c.
The KUnit test suite in gss_krb5_test.c exercised exactly these
internal functions: RFC 3961 n-fold, RFC 3962 key derivation,
RFC 6803 Camellia key derivation, and RFC 8009 AES-SHA2 key
derivation, plus encryption self-tests that drove the now-removed
encrypt routines. The corresponding test coverage is provided by
the crypto/krb5 selftests in crypto/krb5/selftest.c. Remove the
test file, the RPCSEC_GSS_KRB5_KUNIT_TEST Kconfig symbol, the
.kunitconfig, and all VISIBLE_IF_KUNIT / EXPORT_SYMBOL_IF_KUNIT
annotations.
xdr_process_buf() walked xdr_buf segments through a per-segment
callback and existed solely for the crypto routines in
gss_krb5_crypto.c. With that file removed, xdr_process_buf()
has no remaining callers. Its successor, xdr_buf_to_sg(),
populates a scatterlist directly from an xdr_buf byte range
and was introduced earlier in this series.
With every consumer of struct gss_krb5_enctype removed, replace
its remaining uses with the equivalent fields from struct
krb5_enctype (key_len). Remove struct gss_krb5_enctype, the
supported_gss_krb5_enctypes[] table, gss_krb5_lookup_enctype(),
and the gk5e pointer from krb5_ctx.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Previous patches switched all per-message crypto operations
(encrypt, decrypt, get_mic, verify_mic) from the internal
skcipher/ahash primitives to crypto/krb5 AEAD and shash
handles. The old crypto_sync_skcipher and crypto_ahash fields in
struct krb5_ctx are no longer referenced at runtime.
Remove the ten legacy handle fields from struct krb5_ctx
along with the key derivation and handle allocation code in
gss_krb5_import_ctx_v2() that populated them. Context import
now prepares only the four crypto/krb5 handles (two AEAD for
encryption, two shash for checksums). The corresponding cleanup
in gss_krb5_delete_sec_context() and the error path is likewise
reduced.
The krb5_derive_key() inline wrapper, gss_krb5_alloc_cipher_v2(),
and gss_krb5_alloc_hash_v2() become unused and are removed.
The per-enctype encrypt/decrypt functions (gss_krb5_aes_encrypt,
gss_krb5_aes_decrypt, krb5_etm_encrypt, krb5_etm_decrypt) that
were the sole remaining consumers of these fields are also removed;
their function-pointer call sites were already deleted in earlier
patches.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
All enctypes now route through gss_krb5_aead_encrypt() and
gss_krb5_aead_decrypt(). The per-enctype .encrypt and .decrypt
function pointers served the same purpose as .get_mic and
.wrap before them: dispatching v1 versus v2 implementations.
With v1 support long removed and the Camellia decrypt path
migrated in a preceding patch, every table entry points to
the same pair of functions.
Call gss_krb5_aead_encrypt() and gss_krb5_aead_decrypt()
directly from gss_krb5_wrap_v2() and gss_krb5_unwrap_v2(),
and drop the function pointers from struct gss_krb5_enctype.
While here, propagate the GSS status code returned by
gss_krb5_aead_decrypt() instead of discarding it.
The old indirect call sites returned GSS_S_FAILURE
unconditionally, losing the distinction between an
integrity failure (GSS_S_BAD_SIG) and a structural
error (GSS_S_DEFECTIVE_TOKEN).
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Every enctype points .wrap and .unwrap at gss_krb5_wrap_v2()
and gss_krb5_unwrap_v2(). As with get_mic/verify_mic, the
indirection dates from when v1 enctypes had different wrap
implementations. Call the functions directly and remove the
pointers from struct gss_krb5_enctype.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Every enctype in the table points .get_mic and .verify_mic at
the same pair of functions. The indirection served no purpose
after the v1 enctype support was removed. Call
gss_krb5_get_mic_v2() and gss_krb5_verify_mic_v2() directly
from the GSS mechanism dispatch and drop the function pointers
from struct gss_krb5_enctype.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_krb5_verify_mic_v2() currently recomputes a checksum using
gss_krb5_checksum() and then compares it against the received
checksum with memcmp(). Replace this with a call to
crypto_krb5_verify_mic(), which performs the hash, comparison,
and offset/length adjustment in a single operation through the
crypto/krb5 library.
The scatterlist layout required by RFC 4121 Section 4.2.4 is
constructed via gss_krb5_mic_build_sg(), the shared helper
introduced in the preceding commit. The received checksum
occupies the first scatterlist entry, pointing directly into
the token buffer.
The errno result from crypto_krb5_verify_mic() is mapped to a
GSS major status code via gss_krb5_errno_to_status(), which
returns GSS_S_BAD_SIG for -EBADMSG (checksum mismatch).
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_krb5_get_mic_v2() currently computes the MIC checksum by
driving a crypto_ahash directly, calling gss_krb5_checksum()
with the message body and GSS token header. Replace this with
a call to crypto_krb5_get_mic(), which performs the same keyed
hash operation through the crypto/krb5 library.
RFC 4121 Section 4.2.4 specifies that the checksum covers the
message body followed by the token header. Because the
crypto/krb5 metadata parameter is hashed before the data, the
GSS header cannot be passed as metadata. Instead, the header
is appended to the scatterlist after the body data, producing
the correct hash input ordering without using the metadata
parameter.
The scatterlist layout is:
[checksum_output | message_body | gss_header]
The first scatterlist entry points directly into the
token buffer, so the checksum is written in place.
A shared helper, gss_krb5_mic_build_sg(), is introduced in
gss_krb5_crypto.c to construct this scatterlist layout. The
helper handles overflow allocation and scatterlist chaining
for large xdr_buf page arrays. It is reused by the verify_mic
counterpart in the following commit.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The Camellia enctypes (RFC 6803) use the same MtE authenticated
encryption construction as AES-SHA1 (RFC 3962), implemented in
crypto/krb5 by the rfc3961_simplified profile. The encrypt path
already uses gss_krb5_aead_encrypt() for Camellia, but the decrypt
path was left on the old gss_krb5_aes_decrypt() code when the AES
enctypes were migrated.
Switch the Camellia .decrypt callback to gss_krb5_aead_decrypt() to
complete the AEAD migration for all enctypes. The conf_len and
cksum_len values in crypto/krb5's Camellia enctype descriptors match
the block size and checksum length that gss_krb5_aes_decrypt() was
using, so the headskip and tailskip returned to the unwrap layer are
unchanged.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Replace the per-enctype .decrypt callbacks (gss_krb5_aes_decrypt
and krb5_etm_decrypt) with a single gss_krb5_aead_decrypt()
wrapper that delegates to crypto_krb5_decrypt().
The new wrapper builds a scatterlist covering the secured
region (confounder through checksum), passes it to the AEAD
decrypt operation, and derives the confounder and checksum
lengths from the data offset and length that
crypto_krb5_decrypt() reports. The caller's token header
verification and buffer adjustment logic is unchanged.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Replace the per-enctype .encrypt callbacks (gss_krb5_aes_encrypt and
krb5_etm_encrypt) with a single gss_krb5_aead_encrypt() wrapper that
delegates to crypto_krb5_encrypt().
The xdr_buf setup -- GSS header insertion, confounder space
allocation, and token header copy -- remains unchanged. The
difference is that the CBC-CTS encryption and HMAC computation are
now a single AEAD operation through the crypto/krb5 library. Both
the MtE construction (RFC 3962) and the EtM construction (RFC 8009)
are handled transparently by the AEAD transform.
The plaintext page data must be copied from the page cache pages to
the scratch output pages before building the scatterlist, since the
AEAD operates in-place rather than using separate input and output
scatterlists.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Allocate crypto_aead handles for encryption (one per direction)
and crypto_shash handles for checksumming (one per direction)
using the crypto/krb5 library's key preparation functions.
These four handles derive their subkeys from the session key
and the RFC 4121 usage numbers and are ready for use in
encrypt, decrypt, get_mic, and verify_mic operations.
The existing crypto_sync_skcipher and crypto_ahash handles
remain in place for now; subsequent patches switch the
per-message operations to the new handles and then remove
the old ones.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The crypto/krb5 library returns standard negative errno values,
but the GSS mechanism layer reports results as GSS_S_* major
status codes. A translation is needed at each call site that
will be switched to the new library.
Rather than open-coding the mapping in every wrapper, provide a
single helper function.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The crypto/krb5 library accepts data in scatterlist form, but
the GSS-API layer presents RPC payloads as struct xdr_buf.
Bridge that gap with a pair of helper functions:
xdr_buf_to_sg() - populate a caller-supplied scatterlist
array from a byte range
xdr_buf_to_sg_alloc() - populate a caller-supplied inline
scatterlist, chaining to a heap-
allocated overflow for large payloads
The inline array (typically stack-allocated at eight entries)
covers the common case of small RPCs with no heap allocation
on the encrypt/decrypt path. Only buffers spanning many pages
incur a kmalloc for the chained extension.
The segment-walking logic follows the same head, page array,
tail traversal as xdr_process_buf(), but populates a
scatterlist directly rather than invoking a per-segment
callback. sg_next() traversal makes the walker safe for
chained scatterlists. Once subsequent patches reroute all
per-message crypto operations through crypto/krb5,
xdr_process_buf() loses its last callers and is removed.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Each krb5_ctx currently points to a gss_krb5_enctype, the
rpcsec_gss_krb5 module's own enctype descriptor. To begin
using the common crypto/krb5 library, store a pointer to the
corresponding struct krb5_enctype (from <crypto/krb5.h>) as
well.
The lookup is performed in gss_import_v2_context() immediately
after the existing gss_krb5_lookup_enctype() call. If
crypto_krb5_find_enctype() cannot find a matching enctype the
context import fails, ensuring the module never operates with
a partially-initialized krb5_ctx.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The rpcsec_gss_krb5 module currently contains its own Kerberos 5
crypto implementation (key derivation, encryption, checksumming)
that duplicates functionality available in the common crypto/krb5
library. As a first step toward migrating to that library, add a
Kconfig select so that building rpcsec_gss_krb5 pulls in the
common Kerberos 5 crypto support.
The per-enctype Kconfig options (AES_SHA1, CAMELLIA, AES_SHA2)
remain: they continue to gate which encryption types are offered
by the GSS mechanism. The individual crypto algorithm selects
they carry become redundant once the migration is complete, since
CRYPTO_KRB5 already selects all needed ciphers and hashes.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Convert the IOCTL path similarly to how we converted Netlink.
The device lookup gets a little hairy. We could take rtnl_lock
unconditionally and drop it before calling the driver (this would
avoid the reference + liveness check). But I think being able
to make progress even if rtnl is dead-locked is quite useful.
First extra concern is handling features. List all the cmds which
modify features and always take rtnl_lock. We could fold this list
into ethtool_ioctl_needs_rtnl() but seems cleaner to keep
ethtool_ioctl_needs_rtnl() driver-related. If a driver changed
features and we were not holding rtnl_lock - warn about it.
It can only happen on buggy ops locked drivers (buggy because
they should have set appropriate "I need rtnl for op X" bit).
Second wrinkle is the PHY ID hack which drops the locks while
sleeping. Convert its static "busy" variable which used to
be protected by rtnl_lock to a field in struct ethtool_netdev_state.
This feature is about identifying an adapter or a port within
a system, so being able to blink multiple LEDs at the same
time is likely not very useful in practice. But it's the simplest
fix, we can add a mutex if someone thinks a system should only
be ID'ing one port at a time.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add another layer of helper functions to make upcoming locking
changes easier. Otherwise we'd need a pretty complex goto
structure. netdev instance lock is now taken slightly sooner
but that should not be an issue since rtnl_lock is already held,
anyway.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Skip rtnl_lock in RSS context handlers if device is ops-locked.
Fairly trivial conversion. bnxt needed rtnl_lock for changing
the main context but looks like additional contexts are fine
without it.
Note (for review bots?) that ethnl_ops_begin() checks whether
the device is still registered.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Module firmware flashing reads SFF-8024 identifier bytes via
.get_module_eeprom_by_page(). Other than that it modifies
a bit in the netdev->ethtool struct. Both should be ops-locked
at this point.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethnl_tsinfo_dumpit() iterates netdevs and per-netdev PHY topology
calling ops->get_ts_info(). Switch to the "ops compat locking"
helpers which take either rtnl_lock or instance lock, depending
on what the device needs.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Skip rtnl_lock in cable test handlers. This is really a noop since
no ops locked device supports these.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make ethtool not take rtnl_lock for SET commands when operation
is performed on an ops-locked driver. cfg/cfg_pending are now
ops-locked, since only ethtool modifies them.
Some SET driver callbacks will still need rtnl_lock, most notably
those which may end up calling netdev_update_features() or the qdisc
layer (via netif_set_real_num_tx_queues()). Let drivers selectively
opt back into the rtnl_lock with a new bitfield in ops.
We need two helpers since Netlink and ioctl cmds have different
values. Keep the helpers side by side in common.h to make sure
they get updated together, even tho they will only get called
from ioctl.c and netlink.c.
SET commands which don't use ethnl_default_set_doit() are converted
by subsequent commits.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethnl_default_doit() and ethnl_default_dump_one() are both used
exclusively for GET callbacks (former to get info for a single
device or get global strings). ops-locked devices don't need
rtnl_lock for GET callbacks, stop taking it.
Introduce an opt-out mechanism for devices which use phylink (fbnic)
since phylink currently depends on rtnl_lock protection. Subsequent
patches will add more exceptions, anyway. Practically the new helpers
for judging if command needs rtnl_lock could also call
netdev_need_ops_lock() but I find that it makes the code in the callers
slightly less obvious.
Add a helper for IOCTLs already, even tho it's unused so that
we can keep them in sync as the series progresses.
This is the first user-visible step of moving ethtool ops out
from under rtnl. Subsequent patches do the same for SET ops,
as well as the ioctl path.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev->hwprov tracks the active hwtstamp provider for the device.
Make it ops protected (instance lock if the netdev driver opts
into holding instance lock around callbacks, otherwise rtnl_lock).
hwprov is written and read in:
- drivers/net/phy/phy_device.c
phydev and ops protection don't currently mix, add a comment
- net/ethtool/
as of now holds both rtnl lock and ops lock, this one will
soon only hold one lock or the other
read in:
- net/core/dev_ioctl.c
holds both rtnl lock and ops lock
- net/core/timestamping.c
RCU reader
The new netdev_ops_lock_dereference() helper does not have
"compat" in the name. The name would be quite long and I think
in this case it should be obvious that we need _a_ lock.
netdev_lock_dereference() already exists and means dev->lock
is always expected.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phydev <> netdev linking and lifecycle depends on rtnl_lock.
We want to switch to instance locks for most ethtool ops.
Let's add an assert that ops locked devices don't use phydev
today. If one does we can either opt the phy ops out of
being purely ops locked, or do deeper surgery to make phy
locking ops-compatible. I don't think there's any fundamental
challenge to make that work.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethnl_bcast_seq is a global counter stamped into the nlmsg_seq field
of every multicast notification, allowing userspace to detect dropped
messages. Today the ordering is achieved by using rtnl_lock().
Moving forward we will want ethtool ops to run under just the netdev
instance lock so to establish ordering we need a separate lock
for notifications. With the netdev instance locks operations on
different devices may bypass each other but the expectation is
that it should not matter. What we need to prevent is:
- notification IDs getting out of order
- operations on one device getting out of order
For simplicity defer allocating the ID of the notification right
before the notification is delivered. This removes the need for
special handling in ethnl_rss_create_send_ntf().
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In esp_output_tail(), when esp->inplace is false, the old skb page frags
are replaced with a new page from the xfrm page_frag cache The source
scatterlist (sg) is built from the old frags before the replacement, and
esp_ssg_unref() is responsible for releasing the old page references
after the crypto operation completes
However, if the second skb_to_sgvec() call (which builds the destination
scatterlist from the new page) fails, the code jumps to error_free which
only calls kfree(tmp). The old page frag references captured in the
source scatterlist are never released:
1 sg[] is built from old frags via skb_to_sgvec() (no extra get_page)
2 nr_frags is set to 1 and frag[0] is replaced with the new page
3 Second skb_to_sgvec() fails -> goto error_free
Fix this by adding a bool parameter to esp_ssg_unref() that, when true,
unconditionally unrefs the source scatterlist frags. Since req->src is
not yet initialized by aead_request_set_crypt() at the point of the
error, the source scatterlist is obtained directly via esp_req_sg()
Existing callers pass false to preserve the original behavior
The same issue exists in both esp4 and esp6 as the code is identical
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Alessandro Schino <7991aleschino@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
/proc/net/igmp walks the multicast list locklessly under RCU and reads
timer-related fields (im->tm_running, im->reporter, im->timer.expires)
to print the timer state of multicast memberships. Concurrently, these
fields are modified under im->lock spinlock in timer management paths
(igmp_stop_timer(), igmp_start_timer(), and igmp_timer_expire()). Fix this
intentional lockless snapshot by annotating the lockless reads with
READ_ONCE() and the updates with WRITE_ONCE().
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260605014318.3890804-3-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
/proc/net/igmp walks the multicast list for IPv4 interfaces locklessly
under RCU and prints state->in_dev->mc_count. Concurrently, device
init/destruction and multicast join/leave paths update the count
under the RTNL lock. Fix this intentional lockless snapshot by
annotating the read with READ_ONCE() and the updates with WRITE_ONCE().
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260605014318.3890804-2-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
find_skb() falls back to np->skb_pool when the GFP_ATOMIC alloc_skb()
fails. The pool is refilled by refill_skbs(), which always allocates
buffers of MAX_SKB_SIZE (ethhdr + iphdr + udphdr + MAX_UDP_CHUNK ==
1502 bytes).
netconsole, however, computes the requested length dynamically as
total_len + np->dev->needed_tailroom
If the egress device declares a non-zero needed_tailroom (e.g. some
tunnel or hardware accelerator devices), the required length can exceed
MAX_SKB_SIZE. The pooled skb is then handed back to the caller, which
immediately performs skb_put(skb, len), trips the tail > end check, and
triggers skb_over_panic().
Leave the normal alloc_skb(len, GFP_ATOMIC) path untouched -- the slab
allocator can still satisfy oversized requests when memory is available,
so senders to devices with non-zero needed_tailroom keep working in the
common case. Only the pool fallback is gated: when alloc_skb() failed
and len exceeds the pool buffer size, skip the skb_dequeue() instead of
burning a pre-allocated skb on a request that would later trip
skb_over_panic(). Reserving pool entries for requests they can actually
satisfy also keeps the panic path, which depends on the pool being
primed, intact.
When that drop happens, emit a rate-limited net_warn() so the user
notices that netconsole is unable to push messages on the egress device.
The warn is skipped under in_nmi() for the same reason schedule_work()
is: printk machinery taken by net_warn_ratelimited() is not NMI-safe and
would risk recursing into the same nbcon console we are servicing.
MAX_SKB_SIZE / MAX_UDP_CHUNK were private to net/core/netpoll.c. Move
them to include/linux/netpoll.h so netconsole can reference the same
definition that refill_skbs() uses, keeping the two in sync by
construction. The header now pulls in <linux/ip.h> and <linux/udp.h>
explicitly so MAX_SKB_SIZE remains self-contained for any future user.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260604-netcons_fix_before_move-v3-2-ab055b3a6aa5@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
