| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* clk-microchip:
clk: at91: keep securam node alive while mapping it
clk: at91: sama7d65: add peripheral clock for I3C
clk: microchip: mpfs-ccc: fix peripheral driver registration failures after oob fix
clk: at91: sam9x7: Fix gmac_gclk clock definition
clk: at91: sam9x7: Rename macb0_clk to gmac_clk
clk: at91: sam9x7: Remove gmac peripheral clock with ID 67
clk: microchip: rename clk-core to clk-pic32
* clk-qcom: (32 commits)
clk: qcom: regmap-phy-mux: Rework the implementation
clk: qcom: a53: Corrected frequency multiplier for 1152MHz
clk: qcom: camcc-milos: Declare icc path dependency for CAMSS_TOP_GDSC
clk: qcom: gdsc: Support enabling interconnect path for power domain
dt-bindings: clock: qcom,milos-camcc: Document interconnect path
interconnect: Add devm_of_icc_get_by_index() as exported API for users
clk: qcom: camcc-x1p42100: Add support for camera clock controller
clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
clk: qcom: videocc-x1p42100: Add support for video clock controller
dt-bindings: clock: qcom: Add X1P42100 camera clock controller
dt-bindings: clock: qcom: Add X1P42100 video clock controller
clk: qcom: nord: negcc: add support for the USB2 PHY reset
dt-bindings: clock: qcom: add the definition for the USB2 PHY reset
clk: qcom: clk-rpmh: Make all VRMs optional
clk: qcom: Add support for global clock controller on Hawi
clk: qcom: clk-alpha-pll: Add support for Taycan EHA_T PLL
clk: qcom: Add Hawi TCSR clock controller driver
clk: qcom: rpmh: Add support for Hawi RPMH clocks
dt-bindings: clock: qcom: Add Hawi global clock controller
dt-bindings: clock: qcom: Add Hawi TCSR clock controller
...
|
|
into clk-next
* clk-ti:
clk: keystone: sci-clk: fix application of sizeof to pointer
clk: keystone: don't cache clock rate
* clk-samsung:
clk: samsung: exynos990: Fix PERIC0/1 USI clock types
clk: samsung: exynos850: mark APM I3C clocks as critical
* clk-rockchip:
clk: rockchip: allow COMPILE_TEST builds
clk: rockchip: rk3588: add GATE_GRF clocks for I2S MCLK output to IO
soc: rockchip: rk3588: add SYS_GRF SOC_CON6 register offset
clk: rockchip: add helper to register auxiliary GRFs
clk: rockchip: allow grf_type_sys lookup in aux_grf_table
dt-bindings: clock: rockchip,rk3588-cru: add I2S MCLK output to IO clock IDs
* clk-spacemit:
clk: spacemit: k3: Add PCIe DBI clock
dt-bindings: soc: spacemit: k3: Add PCIe DBI clock IDs
clk: spacemit: k3: Fix PCIe clock register offset
clk: spacemit: k3: Switch to pll2_d6 as parent for PCIe clock
|
|
into clk-next
* clk-renesas: (36 commits)
clk: renesas: r9a08g045: Drop unused pm_domain header file
clk: renesas: r8a779g0: Add DSC clock
clk: renesas: rzg2l: Rename iterator in for_each_mod_clock() to avoid shadowing
clk: renesas: r9a08g045: Drop unused DEF_G3S_MUX macro
clk: renesas: rzg2l: Rename RZG3L-prefixed PLL macros to CPG-prefixed ones
clk: renesas: rzg3s/rzg3l: Simplify PLL configuration macro
clk: renesas: rzg2l: Simplify SAM PLL configuration macro
clk: renesas: r8a73a4: Add ZT/ZTR trace clocks
dt-bindings: clock: renesas,cpg-clocks: Document ZT/ZTR trace clock on R-Mobile APE6
clk: renesas: r9a08g046: Add RSPI clocks and resets
clk: renesas: r9a08g046: Add SSIF-2 clocks and resets
clk: renesas: r9a08g046: Add RSCI clocks and resets
clk: renesas: cpg-mssr: Add number of clock cells check
clk: renesas: rzg2l: Refactor rzg3l_cpg_pll_clk_endisable()
clk: renesas: rzg2l: Consolidate DEF_MUX() and DEF_MUX_FLAGS()
clk: renesas: r9a08g046: Add IA55_PCLK to critical module clocks
clk: renesas: r9a09g047: Add support for LCDC{0,1} clocks and resets
clk: renesas: r9a09g047: Add support for DSI clocks and resets
clk: renesas: r9a09g047: Add support for SMUX2_DSI{0,1}_CLK
clk: renesas: r9a09g047: Add CLK_PLLDSI{0,1}_CSDIV clocks
...
* clk-socfpga:
clk: socfpga: agilex: implement l3_main_free_clk
* clk-amlogic:
dt-bindings: clock: amlogic: t7: Add missing mpll3 parent clock
dt-bindings: clock: amlogic: Fix redundant hyphen in "amlogic,t7-gp1--pll" string.
* clk-canaan:
clk: canaan: Add clock driver for Canaan K230
dt-bindings: clock: Add Canaan K230 clock controller
|
|
The previous TAS2781 address is overwritten during calibration,
so switching to the TAS2563 address is required.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20260625102815.20043-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Add a workaround to avoid a possible crash if nf_nat and nft_chain_nat are
compiled built-in and nf_nat fails to register, allowing nft_chain_nat to
access the incorrect pernetns area. This is crash specific of all built-in
compilation. From Matias Krause.
2) Revisit conncount GC optimization for confirmed conntracks, skip GC round
if IPS_ASSURED is set on. This is addressing an issue for corner case
use case scenario involving locally generated traffic. No crash, just a
functionality fix. From Fernando F. Mancera.
3) Validate iph->ihl in flowtable IPIP tunnel support, from Lorenzo Bianconi.
This a sanity check to bounces back malformed IPIP packets to classic
forwarding path.
4) Kdoc fixes for x_tables.h, from Randy Dunlap.
5) Use info->options so nft_synproxy_tcp_options() stays on the same local
snapshot, otherwise eval path can observe inconsistent mix of mss and
timestamps. From Runyu Xiao.
6) Add conntrack_sctp_collision.sh to cover for SCTP INIT collisions.
From Yi Chen.
7) Do not allow NFPROTO_UNSPEC targets if family is NFPROTO_BRIDGE in
nft_compat. This allows to use non-sense targets such as xt_nat leading
to crash. From Florian Westphal.
8) Add a selftest queueing from bridge family. From Florian Westphal.
9) Do not allow to reset a conntrack helper via ctnetlink. This feature
antedates the creation of the conntrack-tools, and it is not used
I don't have a usecase for it, I prefer to remove than fixing it.
10) Add deprecation warning for IPv4 only conntrack helpers for PPTP
and IRC. From Florian Westphal.
11) Store the master tuple in the expectation object and use it,
otherwise SLAB_TYPESAFE_RCU rules allow to display incorrect
master tuple information through ctnetlink.
12) Run expectation eviction when inserting an expectation with no
helper, this is a fix for the nft_ct custom expectation support.
13) Fix nft_ct custom expectation timeouts, userspace provides a
timeout in milliseconds but kernel assumes this comes in seconds.
From Florian Westphal.
14) Cap maximum number of expectations per class to 255 expectations
per master conntrack at helper registration. This is a fix to
restrict the maximum number of expectations per master conntrack
which can be a issue for the new lazy GC expectation approach.
* tag 'nf-26-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack_helper: cap maximum number of expectation at helper registration
netfilter: nft_ct: expectation timeouts are passed in milliseconds
netfilter: nf_conntrack_expect: run expectation eviction with no helper
netfilter: nf_conntrack_expect: store master_tuple in expectation
netfilter: conntrack: add deprecation warnings for irc and pptp trackers
netfilter: ctnetlink: do not allow to reset helper on existing conntrack
selftests: nft_queue.sh: add a bridge queue test
netfilter: nft_compat: ebtables emulation must reject non-bridge targets
selftests: netfilter: conntrack_sctp_collision.sh: Introduce SCTP INIT collision test
netfilter: nft_synproxy: stop bypassing the priv->info snapshot
netfilter: x_tables.h: fix all kernel-doc warnings
netfilter: flowtable: Validate iph->ihl in nf_flow_ip4_tunnel_proto()
netfilter: nf_conncount: prevent connlimit drops for early confirmed ct
netfilter: nf_nat: avoid invalid nat_net pointer use on failed nf_nat_init()
====================
Link: https://patch.msgid.link/20260623221548.701545-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
scx_rcu_cpu_stall() previously recorded the detector CPU rather than the
stalled one, and the expedited grace period path had no stalled CPU to
report at all.
Thread a cpumask through panic_on_rcu_stall() and scx_rcu_cpu_stall()
to capture all stalled CPUs. Report cpumask_first() as exit_cpu and the
full CPU list in the exit message. Task-only stalls yield exit_cpu = -1.
Store the stall mask in scx_sched rather than scx_exit_info, keeping the
BPF-visible struct unchanged. scx_dump_state() reads sch->stall_cpus
directly and dumps all stalled CPUs first to avoid losing them to
truncation.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
... which was wrongly written as cgroup_threadcgroup_change_begin().
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers
* tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (72 commits)
Input: mms114 - fix touch indexing for MMS134S and MMS136
Input: elan_i2c - prevent division by zero and arithmetic underflow
Input: stop force-feedback timer when unregistering input devices
Input: iforce - bound the device-reported force-feedback effect index
Input: goodix - clamp the device-reported contact count
Input: mms114 - reject an oversized device packet size
Input: touchwin - reset the packet index on every complete packet
Input: rmi4 - update formatting in F12
Input: rmi4 - propagate proper error code in F12 sensor tuning
Input: rmi4 - simplify size calculations in F12
Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocators
Input: rmi4 - use devm_kmalloc for F12 data packet buffer
Input: rmi4 - use flexible array member for IRQ masks in F12
Input: rmi4 - use unaligned access helpers in F12
Input: rmi4 - change reg_size type to u32
Input: rmi4 - refactor F12 probe function
Input: rmi4 - use kzalloc_flex() for struct rmi_function
Input: rmi4 - refactor function allocation and registration
Input: rmi4 - use local presence map in rmi_read_register_desc()
Input: rmi4 - fix limit in rmi_register_desc_has_subpacket()
...
|
|
Add a new mode matching flag DRM_MODE_MATCH_TIMINGS_VRR. This is
identical to DRM_MODE_MATCH_TIMINGS, except it requires the vsync
pulse to remain anchored to the end of vtotal, as opposed to the
start of the frame. VRR capable hardware can therefore treat
matching modes as just variants of the same mode with a different
vblank lengths.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260622213602.7244-3-ville.syrjala@linux.intel.com
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
bio_integrity_alloc_buf usage of GFP_ flags is messed up. For one it
mixes GFP_NOFS and GFP_NOIO for neighbouring allocations, but it also
makes the allocations fail more often than needed. That code was copied
from bio_alloc_bioset which needs to do that so that it can punt to the
rescuer workqueue, but none of that is needed for the integrity
allocations that either sits in the file system or at the very bottom
of the I/O stack. Failing early means we'll do a fully waiting
allocation from the mempool ->alloc callback which is usually much
larger than required.
Fix this by passing a gfp_t so that the file system path can pass
GFP_NOFS and the auto-integrity code can pass GFP_NOIO, and don't
modify the allocation type except for disabling warnings.
Fixes: ec7f31b2a2d3 ("block: make bio auto-integrity deadlock safe")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://patch.msgid.link/20260624080014.1998650-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If device_link_add() fails in snd_soc_bind_card() just skip that
driver pair and carry on.
This means that ASoC must now keep track of which components it was
able to device_link to the card->dev. The new card_device_link member
of struct snd_soc_component is non-NULL if a device_link exists.
The intent of the device link is to ensure that the machine driver
system-suspends before the component drivers, to prevent ASoC
suspend attempting to reconfigure a driver that has already suspended.
It isn't possible to create this device link if the machine driver is
a parent of the component driver or already has a device_link in the
opposite direction. In this case skip the link. A warn is placed in
kernel log since this might indicate a genuine design problem with
those two drivers (this can be downgraded to dbg in future when
people are happy that all these special drivers correctly handle their
reversed shutdown order).
Fixes: 0f54ce994b23 ("ASoC: soc-core: Create device_link to ensure correct suspend order")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/linux-sound/61bd38e7-5eb9-4448-a93f-afa2ccbd1c9d@opensource.cirrus.com/T/#m496fe5a11b0a3649afd2e85da5e1cea82bb16d8a
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260623135821.4125543-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* Fix S390_USER_OPEREXEC so it can now be enabled regardless of other
unrelated capabilities
* Fix handling of the _PAGE_UNUSED pte bit that could lead to guest
memory corruption in some scenarios
* A bunch of misc gmap fixes (locking, behaviour under memory pressure)
* Fix CMMA dirty tracking
|
|
Replace the gem-vram memory manager with gem-shmem. Makes the driver more
robust and enables dma-buf sharing with other hardware.
Gem-vram was created from various drivers that used TTM for their memory
management. All these drivers have meanwhile been converted to gem-shmem.
Using gem-vram is deprecated because it has several problems.
* TTM requires significant overcommitment of video memory for reliable
page flips. There needs to be 3 times the size of the largest possible
framebuffer available or page flips can fail. This leaves the display
dark without further warning. Hibmc hardware with 32 MiB and a maximum
framebuffer size of 1920x2000 is at the limit.
* No dma-buf sharing without GTT support. Neither gem-vram nor hibmc
hardware support a GTT address space. This is required to share buffers
with other devices via dma-buf interfaces.
* TTM requires hardware-accelerated rendering into video memory for
optimal results. As hibmc hardware cannot do this, hibmc renders in
system memory and copies the result to video memory. This can be more
effectively implemented with gem-shmem and DRM's shadow-plane helpers.
Converting hibmc to gem-shmem and shadow-plane helpers.
* Replace gem-vram entry points in struct drm_driver with gem-shmem
equivalents. This makes the driver allocate struct drm_gem_shmem_object
for its buffers.
* Use DRM_GEM_SHADOW_*_PLANE for its plane funcs and plane-helper
funcs. The shadow-plane helpers map a plane's gem buffer objects into
kernel address space during a page flip, so that atomic_update can
copy them to video memory.
* Handle framebuffer damage in hibmc_plane_atomic_update(). This updates
video memory from the plane's framebuffer. It automatically synchronizes
shared buffers with other devices. Create the framebuffer with
drm_gem_fb_create_with_dirty() to trigger the update on each page flip.
* Initialize the plane with drm_plane_enable_fb_damage_clips() to limit
the damage updates to the framebuffer areas that changed. We don't want
to do a full-buffer memcpy if only a small area has changed.
* Test display modes against the available video memory in
hibmc_mode_config_mode_valid(). We only want to announce display modes
that fit into display memory.
* Map the display memory itself into kernel address space.
* Do not set drm_mode_config.prefer_shadow. This would advise user space
to install a shadow buffer. But with gem-shmem, the gem buffer object
already acts as a shadow buffer for video memory.
We use these patterns in many other drivers with similar limitation as
hibmc and its hardware. With these changes in place, hibmc is more robust
and better integrated into the overall DRM framework.
v3:
- fix coding style
v2:
- do not select TTM symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Yongbang Shi <shiyongbang@huawei.com>
Link: https://patch.msgid.link/20260618123142.92298-7-tzimmermann@suse.de
|
|
Define macros used for decoding DSC max bpp delta values
from the sink DPCD. This includes per-format masks for
RGB/YCbCr444 and YCbCr420, as well as definitions for delta
scaling and the YCbCr420 bit shift. Also add version_1 as
suffix to MAX_DELTA_BPP.
v2: Move constants under 0x6E register. [Ankit]
Add mask for Native 422 also. [Ankit]
v3: Rename _DSC_NATIVE4222 to _DSC_NATIVE_YCbCr422. [Ankit]
v4: Move Version_1 edit ti patch_1. [Ankit]
Add shift mask for native also. [sashiko]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-4-nemesa.garg@intel.com
|
|
Rename DP_DSC_RGB_YCbCr420_MAX_BPP_DELTA_MASK to
DP_DSC_NATIVE_YCbCr420_MAX_BPP_DELTA_MASK to align with
the DP DSC specification, where the field represents the
native YCbCr 4:2:0 format.
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-3-nemesa.garg@intel.com
|
|
The dsc max bpp delta masks were incorrectly placed
under the DP_DSC_BITS_PER_PIXEL_INC(0x06F) register.
Move these under correct DP_DSC_MAX_BPP_DELTA(0x06E)
register.
v2: Separate patch for correcting register. [Ankit]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-2-nemesa.garg@intel.com
|
|
Pull NFS client updates from Anna Schumaker:
"New features:
- XPRTRDMA: Decouple req recycling from RPC completion
- NFS: Expose FMODE_NOWAIT for read-only files
Bugfixes:
- SUNRPC:
- Fix sunrpc sysfs error handling
- Fix uninitialized xprt_create_args structure
- XPRTRDMA:
- Harden connect and reply handling
- NFS:
- Fix EOF updates after fallocate/zero-range
- Keep PG_UPTODATE clear after read errors in page groups
- Use nfsi->rwsem to protect traversal of the file lock list
- Prevent resource leak in nfs_alloc_server()
- NFSv4:
- Clear exception state on successful mkdir retry
- Don't skip revalidate when holding a dir delegation and attrs are stale
- pNFS:
- Fix use-after-free in pnfs_update_layout()
- Defer return_range callbacks until after inode unlock
- Fix LAYOUTCOMMIT retry loop on OLD_STATEID
- Reject zero-length r_addr in nfs4_decode_mp_ds_addr
- NFS/flexfiles:
- Reject zero-length filehandle version arrays
- Fix checking if a layout is striped
- Fixes for honoring FF_FLAGS_NO_IO_THRU_MDS
Other cleanups and improvements:
- Remove the fileid field from struct nfs_inode
- Move long-delayed xprtrdma work onto the system_dfl_long_wq
- Convert xprtrdma send buffer free list to an llist
- Show "<redacted>" for cert_serial and privkey_serial mount options"
* tag 'nfs-for-7.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (42 commits)
NFS: Use common error handling code in nfs_alloc_server()
NFS: Prevent resource leak in nfs_alloc_server()
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
nfs: don't skip revalidate on directory delegation when attrs flagged stale
xprtrdma: Return sendctx slot after Send preparation failure
xprtrdma: Repost Receive buffers for malformed replies
xprtrdma: Sanitize the reply credit grant after parsing
xprtrdma: Fix bcall rep leak and unbounded peek
xprtrdma: Resize reply buffers before reposting receives
xprtrdma: Check frwr_wp_create() during connect
xprtrdma: Initialize re_id before removal registration
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
xprtrdma: Convert send buffer free list to llist
NFS: correct CONFIG_NFS_V4 macro name in #endif comment
nfs: use nfsi->rwsem to protect traversal of the file lock list
NFSv4.1/pNFS: fix LAYOUTCOMMIT retry loop on OLD_STATEID
nfs: expose FMODE_NOWAIT for read-only files
nfs: add nowait version of nfs_start_io_direct
NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS in pg_get_mirror_count_write
NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS on fatal DS connect errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"The changes primarily focus on filesystem error reporting, reducing
memory footprint by reverting in-memory data structures used for
runtime validation, honoring FDP hints, and adding trace and debug
logs. In addition, there are critical bug fixes resolving
out-of-bounds read vulnerabilities in inline directory and ACL
handling, potential deadlocks in balance_fs, use-after-free issues in
atomic writes, and false data/node type assignments in large sections.
Enhancements:
- Revert in-memory sit version and block bitmaps
- support to report fserror
- add trace_f2fs_fault_report
- add iostat latency tracking for direct IO
- add logs in f2fs_disable_checkpoint()
- honor per-I/O write streams for direct writes
- map data writes to FDP streams
- skip inode folio lookup for cached overwrite
- skip direct I/O iostat context when disabled
- revert "check in-memory block bitmap"
- revert "check in-memory sit version bitmap"
Fixes:
- optimize representative type determination in GC
- fix incorrect FI_NO_EXTENT handling in __destroy_extent_node()
- fix potential deadlock in f2fs_balance_fs()
- fix potential deadlock in gc_merge path of f2fs_balance_fs()
- atomic: fix UAF issue on f2fs_inode_info.atomic_inode
- fix missing read bio submission on large folio error
- pass correct iostat type for single node writes
- fix to do sanity check on f2fs_get_node_folio_ra()
- validate orphan inode entry count
- keep atomic write retry from zeroing original data
- read COW data with the original inode during atomic write
- validate inline dentry name lengths before conversion
- validate dentry name length before lookup compares it
- reject setattr size changes on large folio files
- revert "remove non-uptodate folio from the page cache in move_data_block"
- validate ACL entry sizes in f2fs_acl_from_disk()
- bound i_inline_xattr_size for non-inline-xattr inodes
- fix listxattr handling of corrupted xattr entries
- fix to round down start offset of fallocate for pin file"
* tag 'f2fs-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
f2fs: fix to round down start offset of fallocate for pin file
f2fs: fix listxattr handling of corrupted xattr entries
f2fs: skip direct I/O iostat context when disabled
f2fs: remove unneeded f2fs_is_compressed_page()
f2fs: avoid unnecessary fscrypt_finalize_bounce_page()
f2fs: avoid unnecessary sanity check on ckpt_valid_blocks
f2fs: misc cleanup in f2fs_record_stop_reason()
f2fs: fix wrong description in printed log
f2fs: bound i_inline_xattr_size for non-inline-xattr inodes
f2fs: validate ACL entry sizes in f2fs_acl_from_disk()
Revert "f2fs: remove non-uptodate folio from the page cache in move_data_block"
f2fs: Split f2fs_write_end_io()
f2fs: Rename f2fs_post_read_wq into f2fs_wq
f2fs: Prepare for supporting delayed bio completion
f2fs: reject setattr size changes on large folio files
f2fs: validate dentry name length before lookup compares it
f2fs: validate inline dentry name lengths before conversion
f2fs: read COW data with the original inode during atomic write
f2fs: skip inode folio lookup for cached overwrite
f2fs: keep atomic write retry from zeroing original data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-06-22
1) xfrm: use compat translator only for u64 alignment mismatch
Gate the XFRM_USER_COMPAT translator on COMPAT_FOR_U64_ALIGNMENT
so 32-bit compat tasks on arches whose 32-bit ABI already matches
the native 64-bit layout are no longer rejected with -EOPNOTSUPP.
From Sanman Pradhan.
2) net: af_key: initialize alg_key_len for IPComp states
Initialize the alg_key_len to 0 in the IPComp branch of
pfkey_msg2xfrm_state() so an uninitialized value cannot drive
xfrm_alg_len() into a slab-out-of-bounds kmemdup during
XFRM_MSG_MIGRATE. From Zijing Yin.
3) xfrm: Fix dev use-after-free in xfrm async resumption
Stash the original skb->dev and extend the RCU critical section
across xfrm_rcv_cb() and transport_finish() to prevent a
tunnel-device UAF and original-device refcount leak when a
callback replaces skb->dev. From Dong Chenchen.
4) xfrm: Fix xfrm state cache insertion race
Move the state-validity check inside xfrm_state_lock in the
input state cache insertion path so a state cannot be killed
between the check and the insert. From Herbert Xu.
5) xfrm: annotate data-races around xfrm_policy_count[] and xfrm_policy_default[]
Add READ_ONCE()/WRITE_ONCE() annotations on xfrm_policy_count
and xfrm_policy_default to silence the KCSAN data race reported
on net->xfrm.policy_count. From Eric Dumazet.
6) espintcp: use sk_msg_free_partial to fix partial send
Replace the manual skmsg accounting in espintcp with
sk_msg_free_partial() so the skmsg stays consistent on every
iteration and the partial-send accounting bugs go away.
From Sabrina Dubroca.
7) xfrm: validate selector family and prefixlen during match
Reject mismatched address families in xfrm_selector_match() and
bound prefixlen in addr4_match()/addr_match() to prevent the
shift-out-of-bounds syzbot reported when an AF_UNSPEC selector
with a large prefixlen is matched against an IPv4 flow.
From Eric Dumazet.
* tag 'ipsec-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: validate selector family and prefixlen during match
espintcp: use sk_msg_free_partial to fix partial send
xfrm: annotate data-races around xfrm_policy_count[] and xfrm_policy_default[]
xfrm: Fix xfrm state cache insertion race
xfrm: Fix dev use-after-free in xfrm async resumption
net: af_key: initialize alg_key_len for IPComp states
xfrm: use compat translator only for u64 alignment mismatch
====================
Link: https://patch.msgid.link/20260622075726.29685-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- New devm_of_dma_controller_register() API
- Refactor devm_dma_request_chan() API
New Support:
- Loongson Multi-Channel DMA controller support
- Renesas RZ/{T2H,N2H} support
- Dw CV1800B DMA support
- Switchtec DMA engine driver
U pdates:
- Xilinx AXI dma binding conversion
- Renesas CHCTRL register read updates
- AMD MDB Endpoint and non-LL mode Support
- AXI dma handling of SW and HW cyclic transfers termination
- Intel ioatdma and idxd driver updates"
* tag 'dmaengine-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (62 commits)
dt-bindings: dma: snps,dw-axi-dmac: Add fallback compatible for CV1800B
MAINTAINERS: dmaengine/ti: Remove myself and add Vignesh as maintainer
dmaengine: qcom: Unify user-visible "Qualcomm" name
dt-bindings: dma: qcom,gpi: Document GPI DMA engine for Shikra SoC
dmaengine: qcom: hidma: use sysfs_emit() in sysfs show callbacks
dmaengine: dw-axi-dmac: fix PM for system sleep and channel alloc
dmaengine: dw-axi-dmac: drop redundant DMAC enable in block start
dmaengine: altera-msgdma: Use memcpy_toio for descriptor FIFO writes
dt-bindings: dma: fsl-edma: add dma-channel-mask property description
dmaengine: tegra: Fix burst size calculation
dmaengine: iop32x-adma: Remove a leftover header file
dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor
dmaengine: dma-axi-dmac: Drop struct clk from main struct
dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc
dmaengine: Fix possible use after free
dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK
dmaengine: dw-edma-pcie: Reject devices without driver data
dmaengine: sh: rz-dmac: Add DMA ACK signal routing support
irqchip/renesas-rzv2h: Add DMA ACK signal routing support
dmaengine: dw-edma: Remove dw_edma_add_irq_mask()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Bunch of new driver, device support in existing drivers/binding and
few updates to existing drivers
New Support:
- Qualcomm Eliza QMP PHY, Eliza Synopsys eUSB2 support, Eliza PCIe
phy support, Nord QMP UFS PHY, IPQ5210 USB3 PHY support
- Econet EN751221 and EN7528 PCIe phy support
- NXPs TJA1145 CAN transceiver phy support
- TI DS125DF111 retimer phy support
- Rockchip RK3528 usb phy support
- TI J722S phy support
- Axiado eMMC PHY driver
- EyeQ5 Ethernet PHY driver
- Generic PHY driver for Lynx 10G SerDes
- Spacemit K3 USB2 PHY support
Updates:
- Tomi helping maintian zynqmp phys
- lynx phy updates to support 25GBASER
- Rockchip GRF for RK3568/RV1108 support
- Qualcomm QSERDES COM v2 support"
* tag 'phy-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (87 commits)
phy: rockchip: inno-usb2: Add missing clkout_ctl_phy kerneldoc
phy: Move MODULE_DEVICE_TABLE next to the table itself
phy: add basic support for NXPs TJA1145 CAN transceiver
dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver
phy: freescale: phy-fsl-imx8qm-lvds-phy: Fix missing pm_runtime_disable() on probe error path
dt-bindings: phy: qcom,qmp-usb: Add ipq5210 USB3 PHY
dt-bindings: phy: qcom,qusb2: Document IPQ5210 compatible
phy: freescale: phy-fsl-imx8qm-lvds-phy: Use synchronous PM runtime put in reset
MAINTAINERS: expand Lynx 28G entry to cover Lynx 10G SerDes
phy: lynx-10g: new driver
dt-bindings: phy: lynx-10g: initial document
phy: lynx-28g: improve phy_validate() procedure
phy: lynx-28g: optimize read-modify-write operation
phy: lynx-28g: add support for big endian register maps
phy: lynx-28g: common probe() and remove()
phy: lynx-28g: make lynx_28g_pll_read_configuration() callable per PLL
phy: lynx-28g: move struct lynx_info definitions downwards
phy: lynx-28g: provide default lynx_lane_supports_mode() implementation
phy: lynx-28g: generalize protocol converter accessors
phy: lynx-28g: common lynx_pll_get()
...
|
|
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Add pci_host_common_parse_ports() for use by any native driver to parse
Root Port properties (currently only reset GPIOs) (Sherry Sun)
- Assert PERST# before enabling regulators to ensure that even if power is
enabled, endpoint stays inactive until REFCLK is stable (Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host bridge)
to help support Key E connectors and the pwrctrl framework (Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power supplies
(Sherry Sun)
* pci/controller/dwc-imx6:
PCI: imx6: Integrate new pwrctrl API
PCI: imx6: Assert ref_clk_en after reference clock stabilizes on i.MX95
PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95
PCI: imx6: Parse 'reset-gpios' in Root Port nodes
PCI: imx6: Assert PERST# before enabling regulators
PCI: host-generic: Add common helpers for parsing Root Port properties
dt-bindings: PCI: fsl,imx6q-pcie: Add reset GPIO in Root Port node
PCI: imx6: Fix IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling
|
|
- Add endpoint controller APIs for use by function drivers to discover
auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the EPC
aux-resource API (Koichiro Den)
- Refactor endpoint doorbell allocation to allow non-MSI doorbells
(Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation fails
(Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell test
(Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way through
(Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid calling it
from hardirq context (Koichiro Den)
- Validate doorbell count when configuring NTB and vNTB doorbells
(Manivannan Sadhasivam)
- Call sleepable pci_epc_raise_irq() from a work item instead of atomic
context, e.g., when setting bits in NTB peer doorbells in the
ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Reject unusable vNTB doorbell counts, e.g., if they don't allow space for
link event 0 and historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and historically
skipped slot 1) so they don't appear as valid doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients can use
multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only specified
bits, use the correct vector for non-contiguous Linux IRQ numbers, and
validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients can use
multiple vectors (Koichiro Den)
* pci/endpoint:
NTB: epf: Implement .db_vector_count()/mask() for doorbells
NTB: epf: Fix doorbell bitmask and IRQ vector handling
NTB: epf: Report 0-based doorbell vector via ntb_db_event()
NTB: epf: Make db_valid_mask cover only real doorbell bits
NTB: epf: Document legacy doorbell slot offset in ntb_epf_peer_db_set()
PCI: endpoint: pci-epf-vntb: Implement .db_vector_count()/mask() for doorbells
PCI: endpoint: pci-epf-vntb: Exclude reserved slots from db_valid_mask
PCI: endpoint: pci-epf-vntb: Guard configfs writes after EPC attach
PCI: endpoint: pci-epf-vntb: Reject unusable doorbell counts
PCI: endpoint: pci-epf-vntb: Report 0-based doorbell vector via ntb_db_event()
PCI: endpoint: pci-epf-vntb: Defer pci_epc_raise_irq() out of atomic context
PCI: endpoint: pci-epf-vntb: Document legacy MSI doorbell offset
PCI: endpoint: pci-epf-ntb: Add check to detect 'db_count' value of 0
PCI: endpoint: pci-epf-vntb: Add check to detect 'db_count' value of 0
NTB: epf: Avoid calling pci_irq_vector() from hardirq context
NTB: epf: Fix request_irq() unwind in ntb_epf_init_isr()
misc: pci_endpoint_test: Remove dead BAR read before doorbell trigger
misc: pci_endpoint_test: Validate BAR index in doorbell test
PCI: endpoint: pci-ep-msi: Add embedded doorbell fallback
PCI: endpoint: pci-epf-test: Reuse pre-exposed doorbell targets
PCI: endpoint: pci-epf-vntb: Reuse pre-exposed doorbells and IRQ flags
PCI: endpoint: pci-ep-msi: Refactor doorbell allocation for new backends
PCI: dwc: ep: Expose integrated eDMA resources via EPC aux-resource API
PCI: dwc: Record integrated eDMA register window
PCI: endpoint: Add auxiliary resource query API
|
|
- Add Gen6 Device IDs to the switchtec driver (Ben Reed)
* pci/switchtec:
PCI: switchtec: Add Gen6 Device IDs
|
|
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize' attributes
(Krzysztof Wilczyński)
- Convert PCI resource files to static attributes to avoid races that cause
'duplicate filename' warnings and boot panics (Krzysztof Wilczyński)
- Remove pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files(),
which are obsolete after converting to static attributes (Krzysztof
Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource mmap
path to match the generic path (Krzysztof Wilczyński)
- Convert sysfs 'legacy_io' and 'legacy_mem' to static attributes
(Krzysztof Wilczyński)
- Remove pci_create_legacy_files() and pci_sysfs_init(), which are obsolete
after converting to static attributes (Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with PCI
mmap (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no trailing
newline (Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/sysfs: Add static PCI resource attribute macros
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
PCI/sysfs: Split pci_llseek_resource() for device and legacy attributes
PCI/sysfs: Only allow supported resource types in I/O and MMIO helpers
PCI: Add pci_resource_is_io() and pci_resource_is_mem() helpers
PCI/sysfs: Use PCI resource accessor macros
|
|
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Rename 'added' to 'add_list' for naming consistency (Ilpo Järvinen)
- Consolidate 'add_list' sanity checks (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Move pci_resource_alignment() from header to setup-res.c file (Ilpo
Järvinen)
* pci/resource:
PCI: Move pci_resource_alignment() to setup-res.c file
PCI: Convert pci_resource_alignment() input parameters to const
PCI: Make pci_sriov_resource_alignment() pci_dev const
powerpc/pseries: Make pseries_get_iov_fw_value() & pnv_iov_get() pci_dev const
resource: Make resource_alignment() input const resource
PCI: Remove const removal cast
PCI: Consolidate add_list (aka realloc_head) empty sanity checks
PCI: Rename 'added' to 'add_list'
PCI: Log all resource claims
|
|
- Set power state to 'unknown' for all devices, not just those with
drivers, during suspend (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device doesn't
respond to config reads, to avoid invalid array accesses (Marco
Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether devices may
be reset while resuming from suspend due to platform issues; use this in
nvme to avoid issues on Qcom RCs (Manivannan Sadhasivam)
* pci/pm:
nvme-pci: Use pci_suspend_retains_context() during suspend
PCI: qcom: Indicate broken L1SS exit during resume from system suspend
PCI: Indicate context lost if L1SS exit is broken during resume from system suspend
PCI: Add pci_suspend_retains_context() to check if device state is preserved during suspend
PCI/IOV: Skip VF Resizable BAR restore on read error
PCI: Skip Resizable BAR restore on read error
PCI: Stop setting cached power state to 'unknown' on unbind
|
|
Currently, pci_create_legacy_files() and pci_remove_legacy_files() are
no-op stubs. With legacy attributes now handled by static groups
registered via pcibus_groups[], no call site needs them.
Remove both functions, their declarations, and the call sites in
pci_register_host_bridge(), pci_alloc_child_bus(), and pci_remove_bus().
Remove the pci_sysfs_init() late_initcall and sysfs_initialized. The
late_initcall originally existed to create all the dynamic PCI sysfs files,
but with both resource and legacy attributes now handled by static groups,
it is no longer needed.
Remove the legacy_io and legacy_mem fields from struct pci_bus which were
used to track the dynamically allocated legacy attributes.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-24-kwilczynski@kernel.org
|
|
Add defines for the standard PCI legacy address space sizes, replacing the
raw literals used by the legacy sysfs attributes.
Then, replace open-coded values with the newly added macros.
No functional changes intended.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-20-kwilczynski@kernel.org
|
|
Currently, pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files()
are no-op stubs. With both the generic and Alpha resource files now
handled by static attribute groups, no platform needs dynamic per-device
sysfs file creation.
Remove both functions, their declarations, and the call sites in
pci_bus_add_device() and pci_stop_dev().
Remove __weak pci_create_resource_files() and pci_remove_resource_files()
stubs and their declarations in pci.h, as no architecture overrides them
anymore.
Remove the res_attr[] and res_attr_wc[] fields from struct pci_dev which
were used to track dynamically allocated resource attributes.
Finally, simplify pci_sysfs_init() to only handle legacy file creation
under HAVE_PCI_LEGACY, removing the per-device loop and the
HAVE_PCI_SYSFS_INIT helper added earlier.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-19-kwilczynski@kernel.org
|
|
On platforms with HAVE_PCI_MMAP or ARCH_GENERIC_PCI_MMAP_RESOURCE, resource
files are now handled by static attribute groups registered via
pci_dev_groups[].
Stub out the pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files(),
as the dynamic resource file creation is no longer needed.
Also, simplify pci_sysfs_init() on these platforms to only iterate buses
for legacy attributes creation, skipping the per-device loop.
Move the __weak stubs for pci_create_resource_files() and
pci_remove_resource_files() into the #else branch since only platforms
without HAVE_PCI_MMAP (such as Alpha architecture) still need them. Guard
the res_attr[] and res_attr_wc[] fields in struct pci_dev the same way.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-10-kwilczynski@kernel.org
|
|
Currently, the PCI resource files (resourceN, resourceN_wc) are dynamically
created by pci_create_sysfs_dev_files(), called from both
pci_bus_add_device() and the pci_sysfs_init() late_initcall, with only a
sysfs_initialized flag for synchronisation. This has caused warnings and
boot panics when both paths race on the same device, e.g.:
sysfs: cannot create duplicate filename '/devices/pci0000:3c/0000:3c:01.0/0000:3e:00.2/resource2'
This is especially likely on Devicetree-based platforms, where the PCI host
controllers are platform drivers that probe via the driver model, which can
happen during or after the late_initcall. As such, pci_bus_add_device()
and pci_sysfs_init() are more likely to overlap.
Convert to static const attributes with three attribute groups (I/O, UC,
WC), each with an .is_bin_visible() callback that checks resource flags,
BAR length, and non_mappable_bars. A .bin_size() callback provides
pci_resource_len() to the kernfs node for correct stat and lseek behaviour.
As part of this conversion:
- Rename pci_read_resource_io() and pci_write_resource_io() to
pci_read_resource() and pci_write_resource() since the callbacks are no
longer I/O-specific in the static attribute context.
- Update __resource_resize_store() to use sysfs_create_groups() and
sysfs_remove_groups(), which re-evaluates visibility and runs the
.bin_size() callback for the static resource attribute groups.
- Remove pci_create_resource_files(), pci_remove_resource_files(), and
pci_create_attr() which are no longer needed.
- Move the __weak stubs outside the #if guard so they remain available
for callers converted in subsequent commits.
Platforms that do not define the HAVE_PCI_MMAP macro or the
ARCH_GENERIC_PCI_MMAP_RESOURCE macro, such as Alpha architecture,
continue using their platform-specific resource file creation.
For reference, the dynamic creation dates back to the pre-Git era:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/drivers/pci/pci-sysfs.c?id=42298be0eeb5ae98453b3374c36161b05a46c5dc
The write-combine support was added in commit 45aec1ae72fc ("x86: PAT
export resource_wc in pci sysfs").
Many other reports mentioned in the cover letter (first Link: below).
Link: https://lore.kernel.org/r/20260508043543.217179-1-kwilczynski@kernel.org/
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215515
Closes: https://github.com/openwrt/openwrt/issues/17143
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-8-kwilczynski@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "khugepaged: add mTHP collapse support" (Nico Pache)
Provide khugepaged with the capability to collapse anonymous memory
regions to mTHPs
- "Remove CONFIG_READ_ONLY_THP_FOR_FS and enable file THP for writable
files" (Zi Yan)
Remove the READ_ONLY_THP_FOR_FS check in file_thp_enabled(), so that
khugepaged and MADV_COLLAPSE can run on filesystems with PMD THP
pagecache support even without READ_ONLY_THP_FOR_FS enabled
- "make MM selftests more CI friendly" (Mike Rapoport)
General fixes and cleanups to the MM selftests. Also move more MM
selftests under the kselftest framework, making them more amenable to
ongoing CI testing
- "selftests/mm: fix failures and robustness improvements" and
"selftests/mm: assorted fixes for hmm-tests" (Sayali Patil)
Fix several issues in MM selftests which were revealed by powerpc 64k
pagesize
* tag 'mm-stable-2026-06-23-08-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (118 commits)
Revert "mm: limit filemap_fault readahead to VMA boundaries"
mm/vmscan: pass NULL to trace vmscan node reclaim
mm: use mapping_mapped to simplify the code
selftests/mm: fix exclusive_cow test fork() handling
selftests/mm: remove hardcoded THP sizing assumptions in hmm tests
selftests/mm: allow PUD-level entries in compound testcase of hmm tests
mm/gup_test: reject wrapped user ranges
mm/page_frag: reject invalid CPUs in page_frag_test
mm/damon/core: always put unsuccessfully committed target pids
mm: page_isolation: avoid unsafe folio reads while scanning compound pages
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
selftests: mm: fix and speedup "droppable" test
mm: merge writeout into pageout
MAINTAINERS: add Hao Ge as reviewer for codetag and alloc_tag
selftests/mm: clarify alternate unmapping in compaction_test
selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category
selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero
selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported
selftests/mm: ensure destination is hugetlb-backed in hugetlb-mremap
selftest/mm: register existing mapping with userfaultfd in hugetlb-mremap
...
|
|
pci_sriov_resource_alignment() inputs struct pci_dev which it should not
need to alter to calculate alignment.
Make pci_dev pci_sriov_resource_alignment() inputs const. It requires
making pci_iov_resource_size() input const as well.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-8-ilpo.jarvinen@linux.intel.com
|
|
resource_alignment() does not need to change resource so it can be made
const.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-6-ilpo.jarvinen@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Core:
- add debugfs support for used channels
- fix resource leak on startup failure
- propagate tx error codes
- clarify blocking mode thread support
Drivers:
- exynos: remove unused register definitions
- imx: refactor IRQ handlers, migrate to devm helpers, and other
minor improvements
- mpfs: fix syscon presence check in inbox ISR
- mtk-adsp: fix use-after-free during device teardown
- qcom: add dt-bindings for QCOM Maili, Hawi, Shikra APCS, and Nord
CPUCP platform support"
* tag 'mailbox-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (23 commits)
mailbox: imx: Don't force-thread the primary handler
mailbox: imx: Move the RXDB part of the mailbox into the threaded handler
mailbox: imx: Move the RX part of the mailbox into the threaded handler
mailbox: imx: Start splitting the IRQ handler in primary and threaded handler
mailbox: imx: Use channel index instead of zero in imx_mu_specific_rx()
mailbox: imx: use devm_of_platform_populate()
mailbox: imx: Use devm_pm_runtime_enable()
mailbox: imx: Add a channel shutdown field
mailbox: imx: Forward the timeout/ error in imx_mu_generic_tx()
dt-bindings: mailbox: qcom: Add IPCC support for Maili Platform
mailbox: add list of used channels to debugfs
mailbox: don't free the channel if the startup callback failed
mailbox: Make mbox_send_message() return error code when tx fails
mailbox: Clarify multi-thread is not supported in blocking mode
mailbox: mtk-adsp: fix UAF during device teardown
mailbox: qcom: Unify user-visible "Qualcomm" name
mailbox: exynos: Drop unused register definitions
dt-bindings: mailbox: qcom: Add IPCC support for Hawi Platform
dt-bindings: mailbox: qcom,cpucp-mbox: Add Hawi compatible
dt-bindings: mailbox: qcom: Add Shikra APCS compatible
...
|
|
As SoundWire devices tend to enumerate on the bus after probe, drivers
frequently need to wait for the device to initialise from common driver
code. The common system is to split drivers into a core module and then
a module for each communication bus. These two facts tend to cause
Kconfig issues, the issue tends to be when SOUNDWIRE=m and DRIVER_I2C=y,
this usually selects DRIVER=y. The driver code then wants to call
sdw_slave_wait_for_init(), but this results in calling a module function
from built in code. A depends on SOUNDWIRE | !SOUNDWIRE could be added to
the end driver but this seems slightly off as it adds a lot of counter
intuitive depends.
A simpler solution is to make sdw_slave_wait_for_init() a static inline
function. As part of doing this add a check for the slave device being
NULL acknowledging that this is likely called from code that is shared
between control buses. It does require dropping the call to
sdw_show_ping_status() but this can be added back in end drivers that
used it originally.
Currently this is causing rand config issues on RT5682 and will soon
also cause similar problems on cs42l43.
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260623101814.24044-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Store master conntrack tuple in the expectation since exp->master might
refer to a different conntrack when accessed from rcu read side lock
area due to typesafe rcu rules.
Fixes: 02a3231b6d82 ("netfilter: nf_conntrack_expect: store netns and zone in expectation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
IRC Direct client-to-client requires plaintext. IRC over TLS should be
preferred, making this helper ineffective. Add a deprecation warning and
update the help text to better reflect that this is needed for the DCC
extension, not IRC itself.
PPTP is esoteric these days and it is the only helper that requires the
destroy callback in the conntrack helper API.
Removal would simplify the conntrack core.
Both helpers are IPv4 only.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Store tiling function pointer in struct intel_panic instead of struct
intel_framebuffer, and store struct intel_panic pointer instead of
struct intel_framebuffer pointer in struct drm_scanout_buffer private
member.
To make this happen, pass the tiling function pointer to panic setup
hook, and initialize sb->private in the hook for clarity.
This allows us to drop the dependency on struct intel_framebuffer from
i915 and xe panic code.
Note: It would be less verbose to have a typedef for the tiling function
pointer. However, there isn't a nice location for it that wouldn't also
increase header interdependencies.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/d97abae79db3437c617cd4cb6193ba017b3a8d78.1780394867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Start reducing i915 and xe core dependency on struct intel_framebuffer
by passing the fb obj from display.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/840c4ccaced5f1c82277285938287776c8cdf513.1780394867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
- use correct names in kernel-doc comments
- add missing struct members to kernel-doc comments
Warning: include/linux/netfilter/x_tables.h:41 struct member 'targinfo' not described in 'xt_action_param'
Warning: include/linux/netfilter/x_tables.h:41 Excess struct member 'targetinfo' description in 'xt_action_param'
Warning: include/linux/netfilter/x_tables.h:90 struct member 'family' not described in 'xt_mtchk_param'
Warning: include/linux/netfilter/x_tables.h:90 struct member 'nft_compat' not described in 'xt_mtchk_param'
Warning: include/linux/netfilter/x_tables.h:101 expecting prototype for struct xt_mdtor_param. Prototype was for struct xt_mtdtor_param instead
Warning: include/linux/netfilter/x_tables.h:121 struct member 'net' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'table' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'target' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'targinfo' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'hook_mask' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'family' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'nft_compat' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:345 expecting prototype for xt_recseq(). Prototype was for DECLARE_PER_CPU() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Memoryless force-feedback devices use a timer to manage playback of
effects. When a driver for such a device is unbound (or the device is
unregistered for other reasons), the driver typically frees its private
data synchronously. However, the input_dev structure (and its associated
force-feedback structures, including the timer) is only freed when the
last user closes the corresponding device node.
If userspace keeps the device node open while the device is unregistered
(e.g., during driver unbind), the force-feedback timer can still fire
after the driver's private data has been freed.
Introduce a new 'stop' callback to struct ff_device, and call it from
input_unregister_device() before the device is deleted. Implement this
callback for memoryless devices and synchronously shut down the timer to
ensure it is stopped and cannot be rearmed once unregistration happens.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"The most notable change is the removal of the fscache backend: it has
been deprecated for almost two years, mainly because EROFS file-backed
mounts and fanotify pre-content hooks (together with erofs-utils) now
provide better functionality and simpler codebase. In addition,
fscache has depended on netfslib for years, which is undesirable for
EROFS since it is a local filesystem. More details in [1].
In addition, sparse support has been added to the pcluster layout,
which is helpful for large sparse AI datasets, and map requests for
chunk-based inodes have been optimized to be more efficient as well.
There are also the usual fixes and cleanups.
Summary:
- Report more consecutive chunks of the same type for
each iomap request
- Add sparse support for the pcluster layout
- Update the EROFS documentation overview
- Remove the deprecated fscache backend
- Various fixes and cleanups"
Link: https://lore.kernel.org/r/20260622013622.934174-1-hsiangkao@linux.alibaba.com [1]
* tag 'erofs-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: handle 48-bit blocks_hi for compressed inodes
erofs: remove fscache backend entirely
erofs: simplify RCU read critical sections
erofs: add sparse support to pcluster layout
erofs: add folio order to trace_erofs_read_folio
erofs: introduce erofs_map_chunks()
erofs: call erofs_exit_ishare() before rcu_barrier()
erofs: update the overview of the documentation
erofs: clean up erofs_ishare_fill_inode()
|
|
When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added,
fib_lookup() performs route lookup directly on two tables.
Since the first lookup does not properly bail out, the result
of an error route in the merged local/main table could be
overwritten by another route in the default table:
# unshare -n
# ip link set lo up
# ip route add 192.168.0.0/24 dev lo table 253
# ip route add unreachable 192.168.0.0/24
# ip route get 192.168.0.1
192.168.0.1 dev lo table default uid 0
cache <local>
Once a random rule is added, the error route is respected:
# ip rule add table 0
# ip rule del table 0
# ip route get 192.168.0.1
RTNETLINK answers: No route to host
Let's fix the inconsistent behaviour.
Fixes: f4530fa574df ("ipv4: Avoid overhead when no custom FIB rules are installed.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260619212753.3367244-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new function rtc_read_next_alarm() that reads the next expiring
alarm from the RTC timerqueue. This is different from rtc_read_alarm(),
which only reads the aie_timer.
The wakealarm sysfs file programs the rtc->aie_timer, whereas the
alarmtimer suspend routine programs its own timer into the RTC timerqueue.
Both timers end up in the RTC's timerqueue, and the first expiring timer
is what gets armed in the hardware.
This new function allows code to query which alarm will actually fire
next, regardless of which subsystem programmed it. This is needed by
platform code that needs to program secondary timers based on the
actual next wakeup time.
Link: https://lore.kernel.org/all/87ed50z0le.ffs@tglx
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260521043714.1022930-2-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add the debugfs and trace plumbing used to trigger and observe
manual client reset.
The reset interface exposes a trigger file for operator-initiated
reset and a status file for tracking the most recent run. The
tracepoints record scheduling, completion, and blocked caller
behavior so reset progress can be diagnosed from the client side.
debugfs layout under /sys/kernel/debug/ceph/<client>/reset/:
trigger - write to initiate a manual reset
status - read to see the most recent reset result
The reset directory is cleaned up via debugfs_remove_recursive()
on the parent, so individual file dentries are not stored.
Tracepoints:
ceph_client_reset_schedule - reset queued
ceph_client_reset_complete - reset finished (success or failure)
ceph_client_reset_blocked - caller blocked waiting for reset
ceph_client_reset_unblocked - caller unblocked after reset
All tracepoints use a null-safe access for monc.auth->global_id
to guard against early-init or late-teardown edge cases.
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
f2fs_recover_orphan_inodes() trusts the orphan block entry_count when
replaying orphan inodes from the checkpoint pack. A corrupted entry_count
larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the
ino[] array and interpret footer or following data as inode numbers.
On a crafted image, mounting an unpatched kernel can drive orphan recovery
into f2fs_bug_on() and panic the kernel. Validate entry_count before
consuming entries so corrupted checkpoint data fails the mount with
-EFSCORRUPTED and requests fsck instead.
Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be
recorded in the superblock s_errors[] field. This gives fsck a persistent
hint even though mount-time orphan recovery failure may leave no chance to
persist SBI_NEED_FSCK through a checkpoint.
Cc: stable@kernel.org
Fixes: 127e670abfa7 ("f2fs: add checkpoint operations")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
