| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
virtio_pmem_host_ack() reclaims virtqueue descriptors with
virtqueue_get_buf(). The -ENOSPC waiter wakeup is tied to completing the
returned token. If token completion is skipped for any reason, reclaimed
descriptors may not wake a waiter and the submitter may sleep forever
waiting for a free slot. Always wake one -ENOSPC waiter for each virtqueue
completion before touching the returned token.
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260630092338.2094628-7-me@linux.beauty>
|
|
virtio_pmem_flush() can run from pmem_submit_bio() while filesystem IO
is waiting on the flush completion. The request object allocation can
sleep, but it should not enter filesystem or block IO reclaim from this
flush path.
Use GFP_NOIO for the request allocation. The virtqueue descriptor
allocation still uses GFP_ATOMIC because it runs under pmem_lock.
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260630092338.2094628-6-me@linux.beauty>
|
|
pmem_submit_bio() passes the parent bio to nvdimm_flush() for
REQ_FUA. For virtio-pmem this makes async_pmem_flush() allocate
and submit a child PREFLUSH bio chained to the parent.
That child allocation is in the block submit path. Making it
blocking with GFP_NOIO can consume the same global bio mempool that
submit_bio() uses, while making it GFP_ATOMIC can fail under
pressure. A forced failure of the child allocation produced:
virtio_pmem: forcing child bio allocation failure for test
Buffer I/O error on dev pmem0, logical block 0, lost sync page write
EXT4-fs (pmem0): I/O error while writing superblock
EXT4-fs (pmem0): mount failed
Avoid the child bio without turning REQ_FUA into a synchronous
submit-path wait. Let provider flush callbacks return
NVDIMM_FLUSH_ASYNC after taking ownership of parent bio completion.
pmem_submit_bio() returns in that case, and virtio-pmem queues an
ordered WQ_MEM_RECLAIM work item that runs the existing host flush
path and completes the parent bio.
This keeps the asynchronous completion model of the child-bio path
while removing the child bio allocation from the submit path.
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260630092338.2094628-5-me@linux.beauty>
|
|
pmem_submit_bio() handles flush-only bios before and after the data
loop. Keep dataless bios out of bio_for_each_segment() so the data path
only walks bios that actually carry bvec data.
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260630092338.2094628-4-me@linux.beauty>
|
|
pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the
bio data and can later overwrite the error with a successful REQ_FUA flush.
That lets data writes run after a failed preflush and can complete the bio
successfully despite the failed ordering barrier.
Run the REQ_PREFLUSH flush synchronously before touching the bio data and
complete the bio with the flush error if it fails. Keep asynchronous flush
chaining for REQ_FUA. At that point, data copy has completed and the parent
bio can wait for the chained flush bio.
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260630092338.2094628-3-me@linux.beauty>
|
|
nvdimm_flush() maps provider flush failures to -EIO. Keep that default
because provider callbacks can report host-side or backend failures that
should remain generic I/O errors to the guest.
Guest-side allocation failures should not be reported as I/O errors. In the
virtio-pmem path, the flush request allocation can fail with -ENOMEM before
any request is submitted to the host. Mapping that to -EIO makes resource
pressure look like media failure.
Preserve -ENOMEM from provider callbacks and continue to map other non-zero
provider failures to -EIO. The generic flush path still returns 0, and
pmem_submit_bio() already converts errno values to block status for bio
completion.
Suggested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Signed-off-by: Li Chen <me@linux.beauty>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260630092338.2094628-2-me@linux.beauty>
|
|
In vp_find_vqs_intx(), the admin vq was set up using the local
queue_idx counter instead of avq->vq_index (the actual queue index
obtained from the device). This differs from vp_find_vqs_msix() which
correctly uses avq->vq_index. Using the wrong index causes the admin
virtqueue to be mapped to an incorrect hardware queue.
Fix it by using avq->vq_index consistent with the msix path.
Fixes: af22bbe1f4a5 ("virtio: create admin queues alongside other virtqueues")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-ID: <20260629033538.2476-1-lirongqing@baidu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_mem_bbm_for_each_bb() and virtio_mem_bbm_for_each_bb_rev()
accept a '_vm' parameter to allow callers to pass any variable name
referring to the virtio_mem instance. However, the 'for' loop
initializer and part of the loop condition use the bare name 'vm'
instead of the macro parameter '_vm'.
Fix by replacing all bare 'vm->' references inside the macros with
the '_vm' parameter, and wrap in parentheses following kernel macro
conventions.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260630045952.2188-1-lirongqing@baidu.com>
|
|
vdpasim_dma_map() updates the IOTLB and the passthrough (iommu_pt)
state under iommu_lock. vdpasim_dma_unmap() clears iommu_pt and
resets the IOTLB before taking iommu_lock, then deletes the mapping
while holding the lock.
A concurrent dma_map(), dma_unmap(), or reset path that also touches
the same address space can therefore observe or modify the IOTLB and
iommu_pt state without consistent locking.
Perform the passthrough transition and range deletion under the same
iommu_lock scope, matching dma_map().
Tested-on: openEuler VM (6.16.8, /usr/src/linux-6.16.8)
Tested-by: Xiong Weimin <xiongweimin@kylinos.cn>
Signed-off-by: Xiong Weimin <xiongweimin@kylinos.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260626020545.607600-3-15927021679@163.com>
|
|
vdpasim_kick_vq() sets pending_kick when a virtqueue is kicked while
the device is suspended (!running but DRIVER_OK). vdpasim_resume()
later replays kicks for all virtqueues when pending_kick is set.
vdpasim_do_reset() clears running and status but leaves pending_kick
unchanged. If a kick is deferred during suspend and the device is
reset before resume, a later resume can spuriously kick every
virtqueue even though no new work was queued after reset.
Clear pending_kick in vdpasim_do_reset() together with the other
device state that must not survive a reset.
Tested-on: openEuler VM (6.16.8, /usr/src/linux-6.16.8)
Tested-by: Xiong Weimin <xiongweimin@kylinos.cn>
Signed-off-by: Xiong Weimin <xiongweimin@kylinos.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260626020545.607600-2-15927021679@163.com>
|
|
The clear_user() call in VHOST_GET_FEATURES_ARRAY incorrectly starts
at argp, which is the beginning of the features array, overwriting the
data just written by copy_to_user(). It should start after the copied
elements at argp + copied * sizeof(u64) to only zero the trailing
unused space.
Use size_mul() for both the offset and length calculations so the
arithmetic stays consistent with the surrounding code and remains
overflow-safe.
Fixes: 333c515d1896 ("vhost-net: allow configuring extended features")
Signed-off-by: Yufeng Wang <wangyufeng@kylinos.cn>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260626070438.59149-1-r4o5m6e8o@163.com>
|
|
Like tell_host(), stats_handle_request() ignores the return value of
virtqueue_add_outbuf() and kicks the queue regardless. The same "we
should always be able to add one buffer to an empty queue" assumption
does not hold once the virtqueue has been broken (e.g. on device
shutdown), where the add fails with -EIO. Unlike tell_host() it does
not wait_event() afterwards so it cannot hang, but it still kicks a
queue with nothing queued.
Warn and bail out on failure, mirroring tell_host() and
virtballoon_free_page_report().
Suggested-by: David Hildenbrand <david@kernel.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260624154001.2733242-1-den@openvz.org>
|
|
tell_host() ignores the return value of virtqueue_add_outbuf() and goes
on to kick the queue and wait_event() for the host's ack. The comment
claims "We should always be able to add one buffer to an empty queue",
but that does not hold once the virtqueue has been broken (e.g. on
device shutdown): the add then fails with -EIO and the following
wait_event() would block forever on a buffer the host can never return.
Warn and bail out on failure, mirroring virtballoon_free_page_report().
Suggested-by: David Hildenbrand <david@kernel.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260624140846.2616797-5-den@openvz.org>
|
|
Commit 8bd2fa086a04 ("virtio: break and reset virtio devices on
device_shutdown()") added a generic virtio bus .shutdown handler that
breaks and resets every virtio device during device_shutdown(), i.e. on
reboot and kexec.
virtio_balloon provides no .shutdown of its own, so that generic path
runs while the balloon's asynchronous work is still armed. Once the
device has been broken, virtqueue_add_inbuf() in
virtballoon_free_page_report() returns -EIO and trips its
WARN_ON_ONCE(). On a kernel booted with panic_on_warn that turns an
ordinary reboot, for example a kexec based upgrade, into a fatal panic
in the middle of device_shutdown(), so the machine never reaches the
new kernel.
Relaxing that single WARN_ON_ONCE() would only hide the symptom: the
inflate/deflate and OOM paths do not warn, they call
wait_event(vb->acked, ...) and would instead block forever on a broken
queue that can no longer complete. The device has to be quiesced, not
just kept quiet.
Add a .shutdown handler that quiesces the balloon via the shared
virtballoon_quiesce() helper while the device is still alive, and only
then breaks and resets it via virtio_device_shutdown(). Unlike
virtballoon_remove() the balloon workqueue is not destroyed, as shutdown
does not free the device and cancel_work_sync() together with stop_update
already prevent any further work from being queued.
Fixes: 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()")
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260624140846.2616797-4-den@openvz.org>
|
|
virtballoon_remove() stops all of the balloon's asynchronous work (the
free page reporting worker, the inflate/deflate and stats workers, the
OOM notifier and the free page shrinker) before tearing the device
down. A following change needs the same teardown from a .shutdown
handler, so move it into a virtballoon_quiesce() helper.
No functional change.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260624140846.2616797-3-den@openvz.org>
|
|
The generic virtio bus .shutdown handler, virtio_dev_shutdown(), breaks
and resets a device once it has established that the driver has no
.shutdown of its own. A driver that does implement .shutdown, to quiesce
its own activity first, still needs the same break and reset afterwards
and would otherwise have to open code it.
Factor the break + synchronize_cbs + reset sequence out of
virtio_dev_shutdown() into an exported virtio_device_shutdown() helper so
such drivers can reuse it instead of duplicating the core logic.
No functional change.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260624140846.2616797-2-den@openvz.org>
|
|
There are two cases of sending a __le64 type to a print function
so fix this by adding le64_to_cpu() which fixes the following
(prototype) sparse warnings:
drivers/crypto/virtio/virtio_crypto_skcipher_algs.c:234:17: warning: incorrect type in argument 3 (different base types)
drivers/crypto/virtio/virtio_crypto_skcipher_algs.c:234:17: expected unsigned long long
drivers/crypto/virtio/virtio_crypto_skcipher_algs.c:234:17: got restricted __le64 [usertype] session_id
drivers/crypto/virtio/virtio_crypto_akcipher_algs.c:196:17: warning: incorrect type in argument 3 (different base types)
drivers/crypto/virtio/virtio_crypto_akcipher_algs.c:196:17: expected unsigned long long
drivers/crypto/virtio/virtio_crypto_akcipher_algs.c:196:17: got restricted __le64 [usertype] session_id
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Message-ID: <20260622150322.526375-1-ben.dooks@codethink.co.uk>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio_crypto_dataq_akcipher_callback() sets the result length from the
device-reported response length without bounding it to the destination
buffer, which was allocated for the original request length.
sg_copy_from_buffer() then reads that many bytes from the destination
buffer; a backend reporting a larger length over-reads adjacent kernel
heap into the caller's scatterlist (an out-of-bounds read).
Clamp the reported length to the originally requested destination length.
A conforming device reports no more than that, so valid results are
unaffected.
Fixes: a36bd0ad9fbf ("virtio-crypto: adjust dst_len at ops callback")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Message-ID: <20260622-b4-disp-3a2c09a8-v2-1-d1a809281db4@proton.me>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vdpasim_create() leaves vdpasim->worker as an ERR_PTR when
kthread_run_worker() fails. The error path then drops the device
reference, which releases the partially initialized simulator.
vdpasim_free() unconditionally passes the worker pointer to
kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger
a general protection fault.
Store the worker error, clear the pointer, and only clean up the worker
when it was successfully initialized. Also make the release path tolerate
partially initialized objects by guarding virtqueue and IOTLB cleanup,
since the same release path can be reached from other initialization
failures.
I found this bug myself, though the patch was written with AI assistance.
Fixes: 76acfa7bc54f ("vdpa_sim: use kthread worker")
Assisted-by: OpenAI-Codex:GPT-5
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Linfeng Sun <linfeng.sun.dev@gamil.com>
Message-ID: <20260620100959.2070316-1-slf@hdu.edu.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The page reporting callback submits an sg list to the reporting
virtqueue. With VIRTIO_RING_F_INDIRECT_DESC negotiated and
total_sg > 1 (which it typically is), virtqueue_add reports it to the
host by allocating an indirect descriptor via kmalloc(GFP_KERNEL).
This is not pretty: the reporting worker isolates potentially hundreds
of MB of free pages from the buddy allocator (reported pages are at
least pageblock_order, and the sg can contain up to
PAGE_REPORTING_CAPACITY entries of varying orders). As the result,
very theoretically, the kmalloc might trigger OOM when we have in fact a
ton of free memory.
Clear VIRTIO_RING_F_INDIRECT_DESC, to avoid using indirect descriptors.
Fixes: b0c504f15471 ("virtio-balloon: add support for providing free page reports to host")
Assisted-by: Claude:claude-opus-4-6
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <73fac8a629fd9aca7bb3265ac243a769c28af25d.1783232420.git.mst@redhat.com>
|
|
Virtio MMIO transport version 3 allows device reset to complete
asynchronously. Unlike version 2, where writing zero to Status must
complete the reset before the write returns, version 3 requires the
driver to poll Status until it reads back zero before considering reset
complete.
Update virtio-mmio accordingly: accept transport version 3 and, during
reset, wait for Status to become zero. Keep the polling loop unbounded,
consistent with virtio-pci, since the reset callback does not return an
error code.
Signed-off-by: Peter Hilber <peter.hilber@oss.qualcomm.com>
Link: https://github.com/oasis-tcs/virtio-spec/commit/bb1dd2e1fe89b862f38f15873d835a698b196f89
Message-ID: <20260605142921.2824-1-peter.hilber@oss.qualcomm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v7.3 merge window
This includes following USB4/Thunderbolt changes for the v7.3 merge
window:
- Assert Downstream Port Reset for Thunderbolt 3 devices during
shutdown to avoid unnecessary delays over warm reset.
- Tidy up Thunderbolt service ->probe callbacks.
- USB4STREAM improvements.
- AMD host interface quirk to fix Tx ring hang on teardown of a DMA tunnel.
- Minor fixes and cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Clamp DMA tunnel credits to what a hop register can hold
thunderbolt: Use min() for the DMA path credit cap
thunderbolt: debugfs: Replace get_zeroed_page() with kzalloc()
thunderbolt: Add quirk to reset host interface on DMA path teardown for AMD USB4 routers
thunderbolt: stream: Add support for busy polling
thunderbolt: Make interrupt optional for rings
thunderbolt: stream: Support IOCB_NOWAIT in non-blocking I/O as well
thunderbolt: stream: Fix possible short reads/writes
thunderbolt: stream: Restore consumer if copying from iter fails
thunderbolt: Remove redundant dev_err_probe()
docs: admin-guide: thunderbolt: Fix sentence structure
thunderbolt: xdomain: Notify peers after enumeration
thunderbolt: Drop comma after device id array terminator
thunderbolt: Assert that a service driver has a probe callback
thunderbolt: Stop passing matched device ID to .probe()
thunderbolt: Assert downstream port reset on shutdown
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v7.3
This is relatively smaller update for CoreSight/hwtracing subsystem updates.
- MAINTAINERS update for HiSilicon PCI Trace & Tune drivers
- Minor fixes to hisi_ptt driver
- Various fixes to the coresight etm4x dirvers
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v7.3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: remove redundant fields in etmv4_save_state
coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable
coresight: etm4x: fix leaked trace id
coresight: etm4x: fix underflow for usage of (nrseqstate - 1)
coresight: etm4x: fix wrong check of etm4x_sspcicrn_present()
hwtracing: hisi_ptt: Remove unnecessary trace buffer zeroing in trace_start()
hwtracing: hisi_ptt: Propagate DMA reset timeout in trace_start()
MAINTAINERS: Update HiSilicon PCI Trace and Tune maintainer
coresight: etm3x: Fix cntr_val_show() to match cntr_val_store() behavior
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
This pull request contains the following interconnect updates for
the 7.3-rc1 merge window:
- New driver for Maili SoC
- Add support for QoS on the SC8280XP SoC
- Add support for QoS on the x1e80100 SoC
- Add EPSS L3 scaling support for Shikra SoC
- Add COMPILE_TEST support for some platforms
- Misc tiny improvements and fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
interconnect: debugfs-client: add NULL check for platform_device_alloc
interconnect: qcom: simplify allocation
interconnect: qcom: add COMPILE_TEST
interconnect: qcom: add Maili interconnect provider driver
dt-bindings: interconnect: qcom: document the RPMh Network-On-Chip interconnect in Maili SoC
interconnect: qcom: Add EPSS L3 scaling support for Shikra SoC
dt-bindings: interconnect: qcom,osm-l3: Add EPSS L3 DT binding for Qualcomm Shikra SoC
interconnect: qcom: x1e80100: enable QoS configuration
dt-bindings: interconnect: qcom,x1e80100-rpmh: add clocks property to enable QoS
interconnect: qcom: sc8280xp: Enable QoS configuration
dt-bindings: interconnect: qcom,sc8280xp-rpmh: Add reg and clocks for QoS
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of fixes for the 7.2 cycle.
Given timing these are probably now merge window material.
Usual mixed bunch of ancient issues and newer ones.
core,buffer
- Fix a potential UAF in release on anonymous buffers.
- Make sure DMA fence lock lifetime matches that of the DMA fence.
- Make IIO DMA fence release RCU safe.
various
- Kconfig missing REGMAP* related selects.
- Unbalance of runtime pm or regulators in error paths.
adi,ad3552r-hs
- Fixing wrong buffers size for string printing.
adi,ad4080
- Fix 16-bit part support by adding path to tell the backend what
the data size is - avoiding corrupted data capture.
adi,ad5446
- Wrong MODULE_DEVICE_TABLE() type due to case error.
atlas,sensor
- Drop use of irq_work() in favour of iio_trigger_poll_nested() avoiding
a possible UAF.
hid-temperature
- Potential release ordering issue due to mixed devm and not that
can lead to long timeouts.
infineon,dps310
- Fix NULL dereference on ACPI platforms.
invense,mpu3050
- Fix sign of raw angular velocity readings.
mitsubishi,m62332
- Fix a regulator reference counting issue when switching channels.
sharp,gp2ap002
- Unbalanced runtime PM on repeated event writes.
- Reenable irq if runtime suspend fails.
ti,ads7138
- Disable statistics gathering whilst reading conversions results
to avoid data corruption.
ti,opt4001
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Fix use of wrong register.
- Pointer type mismatch to div_u64_rem()
- Fix reversed GENMASK() arguements.
ti,opt4060
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Pointer type mismatch to div_u64_rem()
- Wrong register name in an error print.
ti,pac1921
- Fix wrong channel used in the trigger handler for some combinations
of enabled channels.
* tag 'iio-fixes-for-7.2b-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (31 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
dw_i3c_master_daa() derives the number of newly assigned dynamic
addresses from cmd->rx_len, the ISR sets it to the number of address
slots ENTDAA left unassigned. It starts out as zero, which already
means "every address was assigned", so a timed out transfer leaves
that value in place and it gets used as a result.
If there's no client connected, the addr assign cmd times out, then
the driver calls i3c_master_add_i3c_dev_locked() to add devices that
are not there, each costing about 1s, thus adds non necessary boot
time up to (maxdev * 1)s.
Start from maxdevs instead: no address is assigned before ENTDAA runs,
and the existing rx_count >= maxdevs check then reports an empty bus.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260819044833.32611-1-jszhang@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
- fix long-standing force-feedback initialization race across the subsystem
(Dmitry Torokhov)
- switch to system_dfl_wq (Marco Crivellari)
|
|
- support for tablet-mode switch for AMD SFH-based systems (Basavaraj Natikar)
|
|
- backlight fixes and improvements (Andre Eikmeyer)
|
|
- support for HyperX QuadCast 2 (Benjamin Blume)
|
|
- add support for devices that provide HID descriptor solely through ACPI _DSM
method (XIE Zhibang)
|
|
- support for full I2C bus config parameters (Even Xu)
|
|
- HID++ 2.0 repogrammable button support (Elliot Douglas)
- Bolt receiver support for HID++ devices (Erik Håkansson)
|
|
- support for MSI Claw (Derek J. Clark)
|
|
- assorted fixes (Alexandre Derumier, Christos Maragkos, Jiangshan Yi)
|
|
- memory management fix on device cleanup path (Xu Rao)
- profile index handling fix (Michael Bommarito)
|
|
- small fixes and code improvements (e.g. devm_kasprintf() conversion,
using guard() and scoped_guart(), etc) (Doruk Tan Ozturk,
Rosalie Wanders)
|
|
- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)
- assorted fixes, improvements and code refactoring (Vicki Pfau)
|
|
- support for MSI Raider A18 HX A9WJG RGB (David Glushkov)
- Improvements and fixes for various Arctis devices support (Sriman Achanta)
|
|
- report data handling optimization (Ruoyu Wang)
|
|
Pull ARM SoC platform updates from Arnd Bergmann:
"The 32-bit Arm platforms are a bit more interesting this time: I
refreshed an earlier series to mark code as deprecated that does have
the tendency of getting in the way of cleanups and new features but
has close to zero users. Among these are:
- 22 of the remaining 28 legacy board files that predate the current
devicetree based descriptions, using old chips from Intel and
Marvell. The remaining six board files are for TI OMAP1 and Samsung
s3c64xx chips and all still have known users.
- support for Cortex-M3/M4/M7 and ARM1136r0 CPU cores and the 25
machines based on these. These all use devicetree but the CPU
support causes disproportional work. Most of them are just
reference boards, the notable exceptions being the Nokia N800/N810
tablet and the Buglabs BUG platform.
- be8, be32, oabi and iwmmxt userspace binaries, which were mostly
associated with the platforms now scheduled for removal and are
increasingly problematic to support with modern toolchains.
Nothing is actually removed at this point, to ensure that any
remaining users continue to have the 7.3-LTS for a while longer.
Patches for removal are currently being tested.
Other updates include a continued work to convert GPIO number based
interfaces to descriptors, a patch to restore little-endian mode on
the one Arm platform (ixp4xx) that only worked in big-endian mode
recently, and some minor cleanups and bugfixes"
* tag 'soc-arm-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
MAINTAINERS: Drop redundant lists from various Samsung entries
ARM: tegra: Replace __ASSEMBLY__ with __ASSEMBLER__
ARM: tegra: Fix OF node reference leaks in IRQ init
ARM: lpc32xx: remove a few manually populated OF devices
ARM: lpc32xx: only run SoC init on LPC32xx hardware
firmware: imx: scu: manage mailbox channels and global handle
ARM: sa1100: h3xxx: convert gpio-keys to use software nodes
ARM: sa1100: collie: convert gpio-keys to use software nodes
ARM: sa1100: assabet: convert gpio-keys to use software nodes
gpio: sa1100: register software node for GPIO controller
ARM: ixp4xx: Relax endianness
ARM: replace linux/gpio.h inclusions
soc: imx9: devm_kasprintf error handling
ARM: mark mv78xx0 support as deprecated
ARM: mark axxia platform as deprecated
ARM: mark Cortex-M3/M4/M7 based boards as deprecated
ARM: mark footbridge as deprecated
ARM: mark RiscPC as deprecated
ARM: mark mach-sa1100 as deprecated
ARM: orion5x: mark all board files as deprecated
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.
On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup"
* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are two new mystery SoCs with very little public information
about them so far, Qualcomm's Cortex-A78C based "Shikra" and Altera's
Cortex-A720 based Agilex72 SOCFPGA.
We have also gained support for a couple of SoCs from the 2023/2024
timeframe that have been in the making for a while:
- The Apple platform gains support for M3 Pro, Max and Ultra SoC,
following the basic M3 support from 7.2.
- Samsung Exynos 1580 is a high-end mobile phone SoC from 2024
- Canaan K230 is a RISC-V based 64-bit AI SoC, based on the earlier
K210 chip
- Sophgo SG2000 is a mixed Arm/RISC-V chip that was already supported
using the Arm core but is now also added for RISC-V along with
several other variants of the cv18xx series
In terms of newly added machines we have reference platforms for all
the chips above, plus
- Only four 32-bit Arm boards: two older phones and two older
industrial/embedded boards; using Allwinner, Qualcomm and Rockchip
SoCs
- Three laptops und three phones using Qualcomm SoCs
- Ten 64-bit Rockchips based single-board computers, along with one
NAS box and a game console.
- Seven industrial/embedded boards and modules using NXP i.MX8/9
SoCs.
- A Lenovo desktop box based on NVIDIA Jetson Xavier NX
- A few more single-board computers based on Allwinnner A133,
Spacemit K1 and TI AM62.
As usual, there is a constant stream of minor cleanups and fixes
towards addressing the 'dt-check-style --mode strict' warnings, and
everyone is expected to address those warnings for new submissions
now"
* tag 'soc-dt-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (864 commits)
Revert "riscv: dts: spacemit: k3: add i2s0-i2s5 nodes"
Documentation/process: maintainer-soc: Mention expectation about dt-check-style
ARM: dts: helios4: add SATA regulator supplies
ARM: dts: helios4: add vcc-supply to GPIO expander
ARM: dts: helios4: add vcc-supply to EEPROM
arm64: dts: turris-mox: fix usb3 phys
arm64: dts: ti: Correct white-space style
arm64: dts: ti: k3-am64: Fix MDIO clock reference for ICSSG0 node
arm64: dts: qcom: talos-evk: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sa8155p-adp: Fix swapped USB and UFS QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: eliza-mtp: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: lemans: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: glymur: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: kaanapali: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sar2130p: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sm8750: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sm8650: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: purwa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: hamoa: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
arm64: dts: qcom: sc8180x: Fix swapped USB QMP PHY vdda-phy/vdda-pll supplies
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Get rid of static_cpu_has() - one less API to care about testing CPU
features
- Unify the handling of CPU core types (performance, efficient, etc) by
mapping the vendor-specific types to Linux ones
- Continuation of the work of Ahmed Darwish to centralize CPUID leaf
representation
* tag 'x86_cpu_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU: Rename struct cpuid_read_output to struct cpuid_output
x86/cpu/scattered: Sort it properly
x86/cpu: Use parsed CPUID(0x1)
x86/lib: Add CPUID(0x1) family and model calculation
x86/cpu: Use parsed CPUID(0x0)
x86/cpu/transmeta: Rescan CPUID(0x1) after modifying capabilities
x86/topology: Add TOPO_CPU_TYPE_LOW_POWER
x86/topology: Name the AMD core-type values
x86/topo: Map vendor CPU types to generic Linux such types
x86/bugs: Don't use cpu-type matching in cpu_vuln_blacklist
x86/cpu: Hide and rename static_cpu_has()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual pile of smallish cleanups and fixlets all over the place
* tag 'x86_cleanups_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove unnecessary __maybe_unused annotations
x86/msr: Document the I/O-like write semantics in the msr driver
x86/apic: Ensure ICR register write value is handled as 32 bits
x86/boot/compressed/head_64.S: Clean up SEV-related comments
Documentation/arch/x86/amd-memory-encryption.rst: Fix typo
x86/platform/quark: Fix kernel-doc warnings in imr.c
x86/ras: Move contents from arch/x86/ras/Kconfig into drivers/ras/Kconfig
x86/cpu: Move intel_get_platform_id() to cpu/intel.c
x86/mm: Fix typo in comment
x86/fpu: Fix kernel-doc formatting above fpu_enable_guest_xfd_features()
x86/cfi: Use symmetric SYM_START and SYM_END in __CFI_TYPE()
x86/cfi: Add __init_or_module annotations for fineibt
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Consolidate the VDSO datastore further and provide support for
mlock_all() and prefaulting.
- Provide 32-bit legacy time related functionality only if
CONFIG_COMPAT_32BIT_TIME is enabled. The config switch exists,
but architecture code still exposes the legacy functionality even
disabled.
Clean this up by adding the missing guards and validating at build
time that the VDSO is legacy free if disabled.
- Consolidate the VDSO related config options in core and drivers,
which removes some non-sensical dependencies and quite an amount of
#ifdeffery.
- Clean up the PAGE_SIZE definition maze
* tag 'timers-vdso-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
random: vDSO: Drop custom PAGE_SIZE definitions
LoongArch: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/timer-riscv: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/arm_arch_timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/mips-gic-timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
MIPS: csrc-r4k: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
vDSO: Make clockmode constants available without CONFIG_GENERIC_GETTIMEOFDAY
kbuild: Support generated asm-headers in subdirectories
vdso: Rename HAVE_GENERIC_VDSO to VDSO_DATASTORE
vdso: Drop HAVE_GENERIC_VDSO from architecture kconfig files
vdso: Automatically select HAVE_GENERIC_VDSO if necessary
MIPS: vdso: Stop using CONFIG_HAVE_GENERIC_VDSO
vdso: Remove the dependency on HAVE_GENERIC_VDSO from ARCH_HAS_VDSO_ARCH_DATA
futex: Remove dependency on HAVE_GENERIC_VDSO from FUTEX_ROBUST_UNLOCK
vdso/gettimeofday: Verify COMPAT_32BIT_TIME interactions
sparc: vdso: Respect COMPAT_32BIT_TIME
MIPS: VDSO: Respect COMPAT_32BIT_TIME
powerpc/vdso: Respect COMPAT_32BIT_TIME
ARM: VDSO: Respect COMPAT_32BIT_TIME
arm64: vdso32: Respect COMPAT_32BIT_TIME
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource/event driver updates from Thomas Gleixner:
- Remove redundant dev_err() and dev_err_probe() invocations in various
drivers
- Handle SWAP_IO_SPACE correctly in the rtl-otto driver
- Make the Samsumg PWM timer driver PREEMPT_RT compatible
- Ensure that the SUN4I timer is programmed with a delta larger than
zero as a zero delta causes the the timer to be disabled
- The usual fixes and improvements all over the place
* tag 'timers-clocksource-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/armada: Unwind timer clock on init failure
clocksource/drivers/rtl-otto: Change driver to use __raw reads and writes
clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type
clocksource/drivers/clps711x: Do not unmap clocksource MMIO
clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path
clocksource/drivers/timer-sun4i: Advertise a real minimum delta
clocksource: Remove redundant dev_err()/dev_err_probe()
clocksource/drivers/sh_cmt: Use named initializers for platform_device_id arrays
clocksource/drivers/sh_mtu2: Drop unused assignment of platform_device_id
|
|
Per PCIe r7.0 sec 6.2.4.3, certain Non-Fatal Errors may be signaled using
ERR_COR instead of ERR_NONFATAL. These "Advisory Non-Fatal Errors" are
listed in sec 6.2.7 and explained in detail in sec 6.2.3.2.4.
Advisory Non-Fatal Errors set bits in the Uncorrectable Error Status
Register as well as one bit in the Correctable Error Status Register
(Advisory Non-Fatal Error Status, bit 13). The latter is masked by
default, hence these errors are currently not signaled at all (except on
non-compliant products which choose to unmask the bit).
Unmask Advisory Non-Fatal Errors on device enumeration.
Some Non-Fatal Errors are always Advisory, others may be Advisory at the
discretion of the detecting agent. If multiple errors occur, the agent
may qualify a portion as non-Advisory and signal ERR_NONFATAL in addition
to ERR_COR. In this case, there's no way to determine which Non-Fatal
Error was Advisory. Assume none is to ensure that the Uncorrectable Error
code path is taken to recover from the errors.
Introduce aer_compute_anfe_status() to compute Advisory Non-Fatal Error
bits from AER registers, based on this policy. Use it for Firmware First
error handling in pci_print_aer(), which receives an AER register dump
from the platform (UEFI r2.11 sec N.2.7).
Introduce aer_get_anfe_status() to read AER registers from a device and
feed them to aer_compute_anfe_status(). Use it for native error handling
in aer_get_device_error_info(), which gathers registers from the device
and caches the computed Advisory Non-Fatal Error bits in a new anfe_status
field in struct aer_err_info.
Regardless whether error handling is native or Firmware First, the AER
driver needs to increment error counters, signal a trace event and log
each error. When Advisory Non-Fatal Errors occur, these steps must be
performed for Correctable Errors and for Uncorrectable Errors. Achieve
this through a recursive invocation of aer_print_error() (for native error
handling) and pci_print_aer() (for Firmware First error handling). The
recursive invocation reports the (Advisory) Uncorrectable Errors after
reporting the Correctable Errors.
Note that the First Error Pointer and TLP Prefix Log is only meaningful
for Uncorrectable Errors, but when Advisory Non-Fatal Errors occur,
aer_get_device_error_info() has to populate the first_error and
tlp_header_valid fields in struct aer_err_info for a Correctable Error.
Avoid incorrectly logging those fields for Correctable Errors by amending
__aer_print_error() and aer_print_error() with conditionals.
Sample log output for an Advisory Unsupported Request Error:
pcieport 0001:00:00.4: AER: Multiple Correctable Error messages received, first one from 0001:0e:00.0
idxd 0001:0e:00.0: PCIe Bus Error: severity=Correctable
idxd 0001:0e:00.0: device [8086:1216] error status/mask=00002000/00000000
idxd 0001:0e:00.0: [13] NonFatalErr | |
idxd 0001:0e:00.0: PCIe Bus Error: severity=Uncorrectable (Non-Fatal)
idxd 0001:0e:00.0: device [8086:1216] error status/mask=00100000/00000000
idxd 0001:0e:00.0: [20] UnsupReq | Receiver | Transaction Layer (First)
idxd 0001:0e:00.0: AER: TLP Header (Flit): 0x01000104 0x00000000 0x0000080e 0x0f800001
This commit takes inspiration (but differs significantly) from an earlier
submission by Zhenzhong Duan, which in turn was based on a submission by
Qingshun Wang:
https://lore.kernel.org/r/20240620025857.206647-1-zhenzhong.duan@intel.com/
Prior attempts at supporting Advisory Non-Fatal Errors were submitted by
Yicong Yang and Dio Sun:
https://lore.kernel.org/r/1614689994-10925-1-git-send-email-yangyicong@hisilicon.com/
https://lore.kernel.org/r/BJXPR01MB0614C01A9523786117B1F1CBCEC8A@BJXPR01MB0614.CHNPR01.prod.partner.outlook.cn/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
[bhelgaas: fold in https://lore.kernel.org/all/amdnMg_J6T3Sys45@wunner.de,
https://lore.kernel.org/all/120da0565eac0157ffd913423c7cfa66e985ff59.1786800931.git.lukas@wunner.de]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240620025857.206647-1-zhenzhong.duan@intel.com/
Link: https://lore.kernel.org/r/1614689994-10925-1-git-send-email-yangyicong@hisilicon.com/
Link: https://lore.kernel.org/r/BJXPR01MB0614C01A9523786117B1F1CBCEC8A@BJXPR01MB0614.CHNPR01.prod.partner.outlook.cn/
Link: https://patch.msgid.link/1b62915ffe06ee5b08e846531c42392e5f244337.1784905909.git.lukas@wunner.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- Update the realtek-rtl driver to support multiple interrupt domains
and remove hardcoded assumptions about the underlying demultiplex
interrupt
- Remove the unused IMGPDC driver, which got orphaned when the metag
architecture was removed long ago.
- Update the Qualcom PDC interrupt chip driver to support differnent
versions of the IP block, to properly differentiable between direct
and GPIO based interrupts and to utilize pass through mode to the
underlying GIC interrupt.
- Remove redundant dev_err() and dev_err_probe() invocations in various
drivers as that error logging has been moved to devm_request_*_irq().
- Support dynamic MSI-X allocations in the GIC-V3-ITS MSI parent domain
driver. That's important for VFIO pass through devices to avoid
reinitialization of the MSI-X space when extending the vector range.
Such a reinitialization can result is lost interrupts and stale
devices.
- Fix a bunch of resource leaks in various driver error paths
- The usual small improvements all over the place
* tag 'irq-drivers-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip/gic-v3-its: Fix grammar and replace a bit number with its symbol
irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc()
irqchip/renesas-irqc: Fix generic interrupt chip leak on remove
irqchip/gic-v3-its: Enable dynamic MSI-X allocation
irqchip: Remove redundant dev_err()/dev_err_probe()
irqchip/gic-v5/iwb: Fix stray verb in comment
irqchip/qcom-pdc: Fix kernel doc for qcom_pdc_gic_secondary_set_type()
irqchip/gic-v3-its: Fix its node leak in gic_acpi_parse_madt_its()
irqchip/gic-v3-its: Fix memleak in its_probe_one()
irqchip/qcom-pdc: Configure PDC to pass through mode
irqchip/qcom-pdc: Differentiate between direct SPI and GPIO as SPI
irqchip/qcom-pdc: Move all static variables to struct pdc_desc
irqchip/qcom-pdc: Restructure version support
irqchip/irq-imgpdc: Remove unused driver
irqchip/irq-realtek-rtl: Activate multiple parents
irqchip/irq-realtek-rtl: Allow shuffled interrupt order
irqchip/irq-realtek-rtl: Add a select function
irqchip/irq-realtek-rtl: Add mask for interrupt handling
irqchip/irq-realtek-rtl: Add interrupt data structure
irqchip/irq-realtek-rtl: Split out parent setup code
...
|
