| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, ntb_netdev returns NETDEV_TX_BUSY for every enqueue error. It
also increments the drop and error counters while leaving the skb owned
by the qdisc, and may return BUSY with the subqueue still awake.
Retrying a permanent error cannot succeed either.
The unconditional BUSY return and premature accounting date back to the
initial driver. The error-path queue stop was later removed without
changing that return value. The current flow-control code includes a
resource check, but ntb_netdev does not honor its result before enqueue.
Honor the resource check before enqueue. For -EAGAIN and -EBUSY, stop
the subqueue, arm the existing reaper timer, and return BUSY without
touching the skb. For other errors, free the skb, increment tx_dropped,
and return NETDEV_TX_OK.
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Fixes: d723485cb4ca ("ntb_netdev: remove tx timeout")
Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260817053519.4135287-3-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ntb_tx_copy_callback() invokes the client callback before returning the
entry to tx_free_q. The callback may wake a stopped client queue, only
for the next enqueue to find no local entry and return -EBUSY. The window
is narrow, but the retry is unnecessary.
Save the callback data and length, then return the entry to tx_free_q
before invoking the client. A completion callback then means both the
client buffer and transport entry are ready for reuse.
Fixes: fce8a7bb5b4b ("PCI-Express Non-Transparent Bridge Support")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260817053519.4135287-2-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Abhijit Gangurde says:
====================
Extend the net/ionic firmware identity structure to expose
the rcq_sign_bit field from the RDMA LIF identity.
* 'ionic_rcq_shared' of https://github.com/abhijitG-xlnx/linux:
net: ionic: Fetch RCQ sign bit from firmware
====================
Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, udf, isofs, and quota updates from Jan Kara:
- Remove deprecated quota code printing warnings about exceeded quota
directly to console
- Various udf & isofs hardening for handling of corrupted filesystems
- Fix a possible data loss in udf when converting files from inline to
out-of-line format
- Simplify EIO error handling in ext2 xattr code
* tag 'fs_for_v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix data loss when converting inline inodes to out of line
udf: Move udf_map_block() up
ext2: Simplify error handling of IO error when adding xattr
isofs: Drop support of directory entries straddling blocks
isofs: validate directory records consistently
quota: remove CONFIG_PRINT_QUOTA_WARNING code
udf: Fix i_lenExtents truncation on 32-bit kernels
isofs: release zisofs block pointer buffer head
udf: Fix bh leak for unallocated space entries
udf: bound lengthAllocDescs from unallocated space entry
UDF symlink pathComponent header OOB read
isofs: fix out-of-bounds page array access on empty zisofs block
udf: reject VAT indexes equal to the entry count
udf: Mark LVID buffer as uptodate before marking it dirty
udf: avoid recursive s_alloc_mutex deadlock when freeing AED blocks
udf: validate extent partition references in udf_current_aext()
|
|
The unified ROM parser reads directory, product, and data-descriptor fields
from the firmware file. Existing validation forms table and data ends with
unchecked additions and multiplications. Malformed values can wrap before
they are compared with the firmware size. The parser also dereferences
typed pointers at firmware-controlled offsets.
Valid descriptor extents alone are insufficient for the consumers. The
loader reads a fixed-size bootloader regardless of its declared size, the
version parser assumes a 17-byte tail, and a partial final firmware word is
read as a full u64. A truncated image can therefore make the driver read
beyond the firmware allocation during validation or loading.
Replace the pointer-returning parser with bounded range helpers. Validate
table entry sizes, descriptor indices, section ranges, the fixed
bootloader load length, and the version tail before exposing any section.
Read all file fields with unaligned little-endian accessors and assemble a
partial final word from only the bytes that remain. Apply the same range
checks to the legacy image before reading its fixed fields.
Fixes: af19b49152bd ("qlcnic: Qlogic ethernet driver for CNA devices")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816052109.4607-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnx2x_init_firmware() frees bp->init_ops, bp->init_data and
bp->init_ops_offsets in its error path without setting them to NULL.
The cleanup function bnx2x_release_firmware() frees the same three
pointers unconditionally, so if init_firmware fails and
release_firmware is later called (e.g. from __bnx2x_remove or through
the function state machine), all three are freed a second time.
Set each pointer to NULL after kfree() in the error path so that the
subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op.
Fixes: 94a78b79cb5f ("bnx2x: Separated FW from the source.")
Cc: stable@vger.kernel.org
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260815122149.951215-1-yijiangshan@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In netdevsim, receive queues (struct nsim_rq) embed their own struct
napi_struct. When queue reset is performed (e.g. via queue_reset
debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq,
and nsim_queue_mem_free() later deletes and frees the old one.
However, nsim_queue_start() failed to update the queue-to-NAPI mapping
via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to
point to the old NAPI struct. After the old queue was freed, a subsequent
queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN
slab-use-after-free read in nla_put_napi_id() when accessing
rxq->napi->napi_id.
Fix this by calling netif_queue_set_napi() in nsim_queue_start() to
associate the new NAPI with the RX queue, and clear the association
with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown.
Fixes: 5bc8e8dbef27 ("netdevsim: add queue management API support")
Reported-by: syzbot+483a6efbc4882c1201ee@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a82c3d4.f7a79266.2f965f.0024.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260817082511.2300402-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
query_capability() copies four ACPI buffer objects returned by the
firmware _DSM into fixed-size u8[16] fields in struct
pfru_update_cap_info using memcpy with the firmware-supplied length:
memcpy(&cap_hdr->code_type,
elements[CAP_CODE_TYPE_IDX].buffer.pointer,
elements[CAP_CODE_TYPE_IDX].buffer.length);
The same pattern repeats for drv_type, platform_id, and oem_id.
If the firmware returns buffer.length > 16 for any of these fields,
memcpy writes past the destination array.
struct pfru_update_cap_info is stack-allocated in pfru_ioctl().
Confirmed with KASAN on 7.2-rc6: three stack-out-of-bounds reports
are generated when a DSM returns 64-byte buffers, with writes reaching
44 bytes past the end of cap_hdr's [64, 156) frame window into
adjacent stack redzones.
Introduce a helper pointer to out_obj->package.elements and use it
to validate each buffer length against its destination field size
before copying, returning -EINVAL if the firmware supplies an
oversized buffer.
Fixes: 0db89fa243e5 ("ACPI: Introduce Platform Firmware Runtime Update device driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Anirudh Prasad <icarus@a0rg.com>
Link: https://patch.msgid.link/1a001e1fee9.637da6dc3533246.238498880682901704@a0rg.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ipa_remove() takes a runtime PM reference before accessing IPA hardware
during teardown. If a concurrent modem start or stop keeps
ipa_modem_stop() busy across both attempts, the callback intentionally
returns without releasing the remaining resources because proceeding
with teardown could crash. That return also skips the matching
pm_runtime_put_noidle(), leaving the callback's usage-count reference
held.
Drop only this runtime PM reference before returning.
pm_runtime_put_noidle() does not request an idle transition, so the
hardware and resources retained on this exceptional path remain
untouched while the usage count stays balanced.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: 923a6b698447 ("net: ipa: get clock in ipa_probe()")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260815151737.3758320-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nv_tx_timeout() dumps the register window in rows of eight dwords:
for (i = 0; i <= np->register_size; i += 32) {
netdev_info(dev, "%3x: %08x ... %08x\n", i,
readl(base + i + 0), ..., readl(base + i + 28));
The loop bound only checks the row's starting offset, so the final row
reads a full 32 bytes from a position that is below the end of the window
but too close to it. base is mapped with exactly that length:
np->base = ioremap(addr, np->register_size);
so the tail of that row is read from beyond the length the driver asked
for. Per variant, the last iteration reads past register_size by:
NV_PCI_REGSZ_VER1 (0x270): row 0x260 reads to 0x27f, 16 bytes over
NV_PCI_REGSZ_VER2 (0x2d4): row 0x2c0 reads to 0x2df, 12 bytes over
NV_PCI_REGSZ_VER3 (0x604): row 0x600 reads to 0x61f, 28 bytes over
This happens on every supported device, not just one of them. Note that
it is not a consequence of the sizes being odd: with i <= register_size
the offending row is reached whatever the size, and a size that were a
multiple of 32 would overrun by a full row rather than by a remainder.
To be precise about the severity: the reads stay inside the BAR. Memory
BAR sizes are powers of two, the driver only accepts a region with
pci_resource_len() >= register_size (forcedeth.c:5757-5762), and the
next power of two at or above each register_size already covers the
offending row: 0x400 for 0x270 and 0x2d4, 0x800 for 0x604. ioremap()
also rounds the mapped length up to page granularity, so the reads land
inside the mapping the CPU has as well. What they leave is the window
the driver asked for, not the BAR and not the mapping. That is still a
driver reading registers it did not ask for, and it is trivial to
avoid, but nobody should expect a fault from it.
Changing <= to < is not enough: register_size is a length and every size
above is larger than its last row start, so i still reaches the offending
row. Check that the whole row fits instead.
The trade-off is that a partial trailing row is no longer dumped: 16 bytes
for VER1, 20 for VER2, 4 for VER3. That seemed preferable to reading
outside the requested window, and to open-coding a second, narrower dump
for the remainder in what is a debug-only path. Extending the dump to
cover the tail can be done on top if anyone misses those registers.
Only reachable with the debug_tx_timeout module parameter, which defaults
to false. It has not been observed at runtime: forcing a genuine TX
timeout on the reference machine is not something I can do safely, so this
rests on the arithmetic above and on a build test, not on a reproduction.
UBSAN does not catch it either, since these are MMIO reads rather than an
array access. It was found by reading the function while fixing the
saved_config_space off-by-one in nv_suspend() and nv_resume().
The dump was introduced with a fixed 0x400 bound while ioremap() mapped
only NV_PCI_REGSZ (0x270), so it read about 0x190 bytes too far from the
start. Commit 86a0f04387bf ("[PATCH] forcedeth: fix initialization")
later replaced 0x400 with np->register_size, which shrank the overrun to
the remainder but did not remove it.
Fixes: c2dba06dae7d ("[PATCH] forcedeth: rewritten tx irq handling")
Signed-off-by: Marek Czernohous <marek@czernohous.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/178682367886.3748309.6978554332066826294@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nv_suspend() and nv_resume() walk the non-PCI configuration space with
for (i = 0; i <= np->register_size/sizeof(u32); i++)
which runs one iteration too many. saved_config_space is declared as
u32 saved_config_space[NV_PCI_REGSZ_MAX/4];
and NV_PCI_REGSZ_VER3 is equal to NV_PCI_REGSZ_MAX (0x604), so on a VER3
device register_size/sizeof(u32) is exactly the array length and the last
iteration addresses one element past the end.
The element it lands on is np->name_rx[0..3]: saved_config_space[] is
followed immediately by char name_rx[IFNAMSIZ + 3], and char needs no
padding. Nothing observable is corrupted by that, because nv_request_irq()
rewrites name_rx with sprintf() before it is ever passed to request_irq().
The bug is the out-of-bounds access itself, which UBSAN reports and which
CONFIG_UBSAN_TRAP=y turns into a trap that aborts the running kernel code,
plus an MMIO read and, on resume, an MMIO writel() to base + 0x604, one
dword past the range the driver mapped:
np->base = ioremap(addr, np->register_size);
VER1 and VER2 devices stay inside the array, but they too get the stray
read and the stray write one dword past their own window.
Caught by UBSAN on an Apple Macmini3,1 (MCP79) during a deep S3 cycle.
The splat below is trimmed: the build path in the file name, the CPU
and taint lines, the Workqueue line, the "?" hint frames, and the
frames below device_suspend are all cut. The kernel was tainted, with
an out-of-tree nouveau and CPU_OUT_OF_SPEC; forcedeth itself was the
stock module.
UBSAN: array-index-out-of-bounds in drivers/net/ethernet/nvidia/forcedeth.c:6225:25
index 385 is out of range for type 'u32 [385]'
Call Trace:
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_out_of_bounds.cold+0x54/0x59
__this_module+0xe398c/0xe9010 [forcedeth]
pci_pm_suspend+0x80/0x170
dpm_run_callback+0x51/0x160
device_suspend+0x1a2/0x4a0
...
Both loops are hit. UBSAN reports each source location only once per module
load (__ubsan_handle_out_of_bounds() calls suppress_report(), which does
test_and_set_bit(REPORTED_BIT, ...) on the struct source_location), so the
two splats land in the first S3 cycle after the module is loaded and later
cycles are silent even though the access still runs off the end every time.
In that first cycle line 6225 is reported from pci_pm_suspend and line 6240
from pci_pm_resume.
The same off-by-one was fixed in nv_get_regs() by commit ba9aa134287f
("forcedeth: fix buffer overflow") in 2012; these two loops were missed.
The suspend and resume side was reported on LKML in September 2013 by Marc
Weber, with the same analysis and the same one-character fix, but the patch
was attached rather than sent inline and the thread ended there.
Use < instead of <=, which saves and restores exactly register_size bytes.
Fixes: 1a1ca86158ee ("[netdrvr] forcedeth: save/restore device configuration space")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Czernohous <marek@czernohous.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/178682367885.3748309.10595890901761762683@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When modifying vport state, the firmware interprets a zero in the max tx
speed field as an intentional reset, which can overwrite previously set
values. This patch attempts to fix this by querying the current max tx
speed from firmware before modifying the vport state and passing it back
in the modification command. If the query fails, fall back to the cached
agg_max_tx_speed value to avoid inadvertently resetting the speed.
Fixes: 50f1d188c580 ("net/mlx5: Propagate LAG effective max_tx_speed to vports")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816065015.3280733-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5_query_vport_max_tx_speed() was introduced to serve the
query_port_speed path, which uses max_tx_speed == 0 when port is down.
This is incorrect for callers that need the actual configured speed
regardless of vport state, such as modify-vport-state helpers
that must preserve the speed across state transitions.
Move this logic to the caller function in the verb flow and let
mlx5_query_vport_max_tx_speed() return the raw firmware value
unconditionally.
Fixes: aaecff5e13cd ("RDMA/mlx5: Implement query_port_speed callback")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816065015.3280733-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Protect vport admin state modifications and vport iteration with the
eswitch state_lock mutex to ensure proper serialization of concurrent
vport state changes.
Currently, calls to mlx5_modify_vport_admin_state() and loops iterating
over eswitch vports can race with each other, potentially leading to
inconsistent vport state. Fix this by acquiring esw->state_lock
Fixes: 7d0314b11cdd ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816065015.3280733-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tbnet_poll() increments rx_packets once per received frame because that is
the NAPI work unit, and then adds the same number to stats.rx_packets. An
skb is handed to the stack only when the last frame of a packet arrives,
so once the MTU exceeds TBNET_MAX_PAYLOAD_SIZE the statistic reports
frames. tx_packets is bumped once per skb, so the two ends of a link
disagree: at MTU 65330 the receiver reports 16 times the packets its
sender sent.
rx_bytes has the matching problem: frames of a packet that is later
dropped mid-assembly are already accounted, so it does not correspond to
rx_packets as documented. Account for both where the packet is completed,
and leave the NAPI work counter alone.
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Fan Ye <fy15309206903@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://patch.msgid.link/20260815-tbnet-rx-stats-v1-1-8da375c2cd09@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull NVDIMM and DAX updates from Alison Schofield:
"Most are DAX preparatory patches for FAMFS support, along with a few
NVDIMM fixes and documentation cleanups.
- Documentation cleanup, removing kernel-doc warnings
- preparing DAX for FAMFS
- misc NVDIMM fixups with cleanups for issues reported by Coccinelle"
* tag 'libnvdimm-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm-btt: clean up kernel-doc warnings
libnvdimm: nd.h: clean up kernel-doc warnings
dax: fsdev.c minor formatting cleanup
dax: fix holder_ops race in fs_put_dax()
dax: read holder_ops once in dax_holder_notify_failure()
dax/fsdev: fail probe on invalid pgmap offset
dax/fsdev: use __va(phys) for kaddr in direct_access
dax/fsdev: clear pgmap ops and owner on unbind
dax/fsdev: don't leave a dangling dev_dax->pgmap on probe failure
dax/fsdev: clear vmemmap_shift when binding static pgmap
dax/fsdev: fix multi-range offset in memory_failure handler
dax: fix misleading comment about share/index union in dax_folio_reset_order()
nvdimm/btt: reject an arena whose nfree is below the lane count
libnvdimm/labels: Bound the on-media label size before the shift
libnvdimm/labels: Prevent integer overflow in __nd_label_validate()
nvdimm: ndtest: remove redundant NULL check before vfree()
nvdimm: nfit: remove redundant NULL check before vfree()
|
|
Fix -Wimplicit-function-declaration error on CONFIG_OF=n builds:
drivers/net/ethernet/cadence/macb_main.c: In function ‘macb_probe’:
drivers/net/ethernet/cadence/macb_main.c:5951:15: error: implicit
declaration of function ‘macb_alloc_tieoff’ [...]
5951 | err = macb_alloc_tieoff(bp);
| ^~~~~~~~~~~~~~~~~
drivers/net/ethernet/cadence/macb_main.c:5973:9: error: implicit
declaration of function ‘macb_free_tieoff’ [...]
5973 | macb_free_tieoff(bp);
| ^~~~~~~~~~~~~~~~
Error got introduced because functions are mistakenly declared in a
`#if defined(CONFIG_OF)` block. Instead of moving functions around,
avoid any future mistake and drop the block entirely.
Change the module content slightly on CONFIG_OF=n. Previously match
tables were ignored. Now they appear in the resulting build. This is
considered trivial in size by most and is the common case:
⟩ 18 out of 254 OF net drivers reference CONFIG_OF
⟩ rg -lF 'MODULE_DEVICE_TABLE(of,' drivers/net/ | tee /tmp/a | wc -l
254
⟩ xargs -a /tmp/a rg -l CONFIG_OF | wc -l
18
Tangent: no, of_match_ptr() does not imply that the compiler can
optimize out match tables, because MODULE_DEVICE_TABLE(of, ...)
unconditionally puts the match tables in the binary. It is only meant
to avoid undefined declaration issues when match tables are hidden
behind a #ifdef, as was done before. We therefore drop the macro call.
Fixes: 5262eab9462a ("net: macb: allocate tieoff descriptor once across device lifetime")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260820-macb-fix-x86-v1-1-b2e7c902104e@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
acpi_bus_get_power_flags() initializes the device power state while the
ACPI device object is being created, before checking whether the device
is ready for enumeration.
If enumeration is deferred, acpi_bus_attach() clears the initialized and
power_manageable flags. When the dependency is later satisfied,
acpi_bus_init_power() is called again and takes additional references to
the power resources used by the device. These references prevent the
resources from being turned off when the device enters D3.
This issue was reproduced on a SpacemiT K3 RISC-V Pico-ITX. The affected
device uses a power resource through _PR0 and has an automatically
derived dependency on its interrupt controller.
The initial power initialization acquires a power resource reference.
The device is then deferred, but that reference is not dropped. When
the dependency becomes available, power initialization acquires another
reference. Consequently, entering D3 only drops the reference count
from 2 to 1 and _OFF is not evaluated:
[ 0.314611] ACPI Debug: "I2P2 _STA"
[ 0.318260] ACPI: \_SB_.I2P2: ACPI: PM: Power resource is on
[ 0.323998] ACPI: \_SB_.I2P2: New power resource
[ 0.382108] ACPI Debug: "I2P2 _STA"
[ 0.478964] ACPI Debug: "I2P2 _ON"
[ 0.482498] ACPI: \_SB_.I2P2: ACPI: PM: Power resource turned on
[ 0.488597] ACPI Debug: "I2C2, PS0"
[ 0.863170] ACPI: \_SB_.I2P2: ACPI: PM: Power resource already on
[ 0.873686] ACPI Debug: "I2C2, PS0"
[ 2.416055] ACPI Debug: "I2C2, PS3"
[ 2.423397] ACPI: \_SB_.I2P2: ACPI: PM: Power resource still in use
To address this, remove the early acpi_bus_init_power() call and leave
regular ACPI device objects uninitialized until acpi_bus_attach() runs
after the device is ready for enumeration.
Power resource objects are initialized through acpi_add_power_resource()
and do not require the generic initialization in acpi_bus_attach(), so
mark them as initialized there.
After the change, device power state initialization is deferred until its
dependency is met. Since no reference is acquired before then, the power
resource left on by firmware is turned off as unused after the namespace
scan. Once the dependency is met, the resource is turned on once for the
device and is turned off normally when the device later enters D3:
[ 0.314628] ACPI Debug: "I2P2 _STA"
[ 0.318277] ACPI: \_SB_.I2P2: ACPI: PM: Power resource is on
[ 0.324016] ACPI: \_SB_.I2P2: New power resource
[ 0.382118] ACPI Debug: "I2P2 _STA"
[ 0.496116] ACPI: \_SB_.I2P2: ACPI: PM: Turning OFF
[ 0.501081] ACPI Debug: "I2P2 _OFF"
[ 0.504705] ACPI: \_SB_.I2P2: ACPI: PM: Power resource turned off
[ 1.415899] ACPI Debug: "I2P2 _ON"
[ 1.418866] ACPI: \_SB_.I2P2: ACPI: PM: Power resource turned on
[ 1.424947] ACPI Debug: "I2C2, PS0"
[ 2.647655] ACPI Debug: "I2C2, PS3"
[ 2.654856] ACPI Debug: "I2P2 _OFF"
[ 2.654866] ACPI: \_SB_.I2P2: ACPI: PM: Power resource turned off
This also avoids powering up devices before their dependencies are
available.
Signed-off-by: Peixin Xie <peixin.xie@linux.spacemit.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260820-acpi-power-resource-ref-fix-v2-1-29818173ea13@linux.spacemit.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull bitmap updates from Yury Norov:
"The usual set of fixes, cleanups and performance improvements together
with a couple of new tests:
- bitmap_find_next_zero_area_off() optimization (Sunyi)
- bitmap_find_next_zero_area_off(): return size when no zero area is
found (Yury)
- bitmap vs IDA vs Maple Tree performance test (Yury)
- get rid of cpumap_print_to_pagebuf() (Yury)
- use nr_node_ids in __nodemask_pr_numnodes() (Li RongQing)
- bitops: make the *_bit_le functions use unsigned long (Benjamin)
- bitmap scatter & gather test fix (Christophe)
- use __ASSEMBLER__ in bitmap header files (Thomas)"
* tag 'bitmap-for-7.3' of https://github.com/norov/linux: (25 commits)
lib: test bitmap vs IDA vs Maple Tree performance for region allocations
bitmap: Return size when no zero area is found
media: s5p-mfc: Treat bitmap size as allocation failure
crypto: ccp: Treat bitmap size as allocation failure
powerpc/msi: Treat bitmap size as allocation failure
ARM: dma-mapping: Treat bitmap size as allocation failure
bitmap: drop bitmap_next_set_region()
nodemask: reduce bitmap width to nr_node_ids in __nodemask_pr_numnodes()
bitmap: Properly initialise destination bitmap for scatter & gather test
lib/bitmap-str: get rid of cpumap_print_to_pagebuf()
perf: Use sysfs_emit() for cpumask show callbacks
PCI/sysfs: Use sysfs_emit() for cpumask show callbacks
RDMA/hfi1: Use sysfs_emit() for cpumask show helper
hwtracing: hisi_ptt: Use sysfs_emit() for cpumask show
fpga: dfl-fme-perf: Use sysfs_emit() for cpumask show
devfreq: Use sysfs_emit() for cpumask show callbacks
cpu: Use sysfs_emit() for cpumask show callback
x86/events: Use sysfs_emit() for cpumask show callbacks
powerpc: Use sysfs_emit() for cpumask show callbacks
arm: Use sysfs_emit() for cpumask show callbacks
...
|
|
ipa_start_xmit() unconditionally stops the TX queue before calling
pm_runtime_get(), relying on the wake scheduled by runtime resume
(ipa_modem_wake_queue_work()) to restart it once power is ACTIVE.
But that work is queued from within the runtime resume callback,
before the device's power state reaches RPM_ACTIVE, so it can run
while the device is still RPM_RESUMING. The wake is then consumed
too early: the transmit it restarts stops the queue again,
pm_runtime_get() returns -EINPROGRESS without arranging any future
wake (deferred_resume exists only for RPM_SUSPENDING), and after the
resume completes nothing is left to wake the queue. Transmit stalls
permanently: packets pile up in the qdisc behind the stopped queue,
the device runtime-suspends, and since the netdev registers no
ndo_tx_timeout the watchdog never fires. Observed on SM7635
(Fairphone 6) as the cellular data path going permanently deaf
within hours, RX included, since nothing resumes the suspended
endpoints.
Close the window by making the wake work wait for the resume to
complete (pm_runtime_get_sync()) before waking the queue. Every
queue stop is then guaranteed a later wake that happens while power
is ACTIVE; a transmit racing a new suspend/resume cycle re-schedules
the work. If the device could not be resumed, wake the queue anyway
so pending packets are dropped by the transmit path rather than
stranded.
The STARTED power flag used to narrow this window: a wake running
before the transmit path's stop suppressed that stop, but only once,
as the flag was cleared by the first stop it absorbed. Removing the
flag made a single transmit during an in-flight resume sufficient to
strand the queue, which is the form observed.
With an accelerated reproducer (autosuspend delay shortened to 5 ms,
~20 packets/s of TX), an unpatched kernel stalled three times in
230 s / 4380 packets; with this patch the same test ran 3601 s /
70298 packets without a stall.
Fixes: 688de12f080f ("net: ipa: kill the STARTED IPA power flag")
Cc: stable@vger.kernel.org
Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260815040302.653650-1-jorijnvdgraaf@catcrafts.net
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CONFIG_SWAP_IO_SPACE is enabled, readl() performs a swap from little
endian device to big endian CPU and vice versa for writel().
This is incorrect for Realtek Interrupt controller as that is a big endian
device and so the LE to BE conversions are unwanted.
Fix this by converting the MMIO accesses to readl_be() and writel_be().
Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller")
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Carlo Szelinsky <github@szelinsky.de>
Link: https://patch.msgid.link/20260820162017.28507-1-adilov@disroot.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Daniel Borkmann:
"Major changes:
- Redesign the verifier error reporting: failures now carry source
and instruction annotations along with the causal event history
that led to them, making program rejections far easier to debug and
repair (Kumar Kartikeya Dwivedi)
- Add arena argument support to kfuncs and struct_ops through the new
__arena and __arena__nullable suffixes (Tejun Heo, Puranjay Mohan,
Kumar Kartikeya Dwivedi, Ihor Solodrai)
- Signed BPF program loader rework to accommodate both BPF and
security community needs where the kernel runs the signature
verification at BPF_PROG_LOAD time before the LSM admission hook
(Daniel Borkmann)
- Add a set of ksock kfuncs which let BPF LSM and syscall programs
create, connect and send on UDP sockets in order to emit telemetry
data (Mahe Tardy)
- Unify helper and kfunc call argument verification and classify
kfunc arguments purely from BTF into a generated bpf_func_proto
which is computed once at add-call time (Amery Hung)
Other features and fixes:
- Enable EXECMEM_ROX_CACHE for BPF allocations on x86 (Mike Rapoport)
- Add bidirectional VLAN support to bpf_fib_lookup() through the new
BPF_FIB_LOOKUP_VLAN and BPF_FIB_LOOKUP_VLAN_INPUT flags (Avinash
Duduskar)
- Infer zext_dst from static register liveness analysis to fix 32-bit
zero-extension semantics, and remove the artificial limitations on
pointer types eligible for spilling (Eduard Zingerman)
- Inline the numeric open-coded iterator kfuncs so that bpf_for()
loops no longer pay a kfunc call on every iteration (Puranjay
Mohan)
- Add an arena-based bitmap data structure to libarena along with
serial and parallel selftests (Emil Tsalapatis)
- Teach resolve_btfids to discover kfuncs from the kernel's BTF ID
sets and to emit kfunc BTF decl tags, reducing the kernel build's
dependency on pahole features (Ihor Solodrai)
- Add BPF_F_ADJ_ROOM_DECAP_* flags to bpf_skb_adjust_room() so that
tunnel decapsulation can update the GSO and encapsulation state of
the skb (Nick Hudson)
- Fix the ring buffer pending_pos walk and the available-data
accounting on 32-bit position wrap (Israel Téllez García)
- Add memory usage accounting for arena maps and fix an mmap_lock
deadlock on arena lock failure (Jiayuan Chen)
- Add tracing_multi link info support to the kernel UAPI and bpftool,
and refactor the stack map code to run with preemption disabled
(Jiri Olsa)
- Support BPF_F_EGRESS in bpf_redirect_peer() to emit the skb in the
egress direction of the target's peer device (Jordan Rife)
- Add a KF_SPINLOCK_SAFE kfunc flag so that providers, in particular
modules, can declare kfuncs safe to call under bpf_spin_lock
instead of relying on the verifier's hard-coded allowlist (Kaitao
Cheng)
- Introduce global percpu data for BPF programs with libbpf probing
and bpftool skeleton support, and stop exposing uninitialized
kernel heap memory when copying per-CPU map values (Leon Hwang)
- Add s390 JIT support for load-acquire and store-release
instructions (Maxim Khmelevskii)
- Fix a CFI mismatch in the task work callback and an arm64 KASAN
false positive after bpf_throw() (Mykyta Yatsenko)
- Reject writes through untrusted BTF pointers and bound the
rdonly/rdwr_buf_size kfunc arguments (Nicholas Dudar)
- Invalidate RCU pointers only after the final spin unlock and
account for preempt and IRQ disabled regions as overlapping RCU
protection (Ning Ding)
- Support mixing bpf2bpf calls and tail calls on RV64, add signed
operations and 32-bit atomics to the RV32 JIT, and add timed
may_goto support (Pu Lehui, Kuan-Wei Chiu, Feng Jiang)
- Fix a use-after-free on mm_struct in bpf_find_vma() for foreign
tasks and an mmap_lock leak in the irq_work path (Sanghyun Park)
- Populate mmap-able BPF array map memory lazily which makes mmap()
O(1) instead of proportional to the map size (Song Liu)
- Introduce a jit_required flag and reject programs with inlined
helpers when no JIT is available, where the interpreter would
otherwise jump into an invalid address (Tiezhu Yang)
- Fix the x86 JIT per-CPU address resolution into an extended
register where the REX prefix dropped the high destination register
bit (Vineet Gupta)
- Reject MEM_ALLOC BTF accesses past object bounds, arena frees below
the arena base, and mixed arena and ordinary atomic paths (Yiyang
Chen)
- Fix the trampoline handling of 128-bit arguments and of return
values larger than 8 bytes (Yonghong Song)
- Ensure that any fault prone load is rewritten with exception table
handling, and fix the arena load-acquire and atomic fetch handling
in the x86, arm64, riscv and s390 JITs (Daniel Borkmann)
- Many more fixes and cleanups across the verifier, arena,
trampolines, sockmap, cgroup, ring buffer, x86/arm64/riscv/s390
JITs, libbpf, bpftool, resolve_btfids and selftests"
* tag 'bpf-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (373 commits)
selftests/bpf: Add tests for a store on a fault prone qdisc pointer
selftests/bpf: Add tests for fault prone loads out of RCU pointers
selftests/bpf: Add tests for pointer type merge at a shared load
selftests/bpf: Remove duplicate copies of the arena spinlock qnodes
selftests/bpf: Retry stat generation in cgroup_iter_memcg
selftests/bpf: Test pseudo-function policy diagnostics
bpf: Distinguish function references in policy diagnostics
bpf: Preserve source attribution without source text
selftests/bpf: Test kfunc argument diagnostics
bpf: Correct kfunc argument diagnostics
bpf: Use canonical stack argument names in diagnostics
bpf: Preserve R0 lineage across helper calls
selftests/bpf: Exercise negative optlen in cgroup getsockopt hook
bpf: Reject negative optlen in cgroup getsockopt hook
selftests/bpf: tc_tunnel - validate decap GSO and encapsulation state
bpf: Clear decap state on skb_adjust_room shrink path
bpf: Allow new DECAP flags and add guard rails
bpf: Add BPF_F_ADJ_ROOM_DECAP_* flags for tunnel decapsulation
bpf: Refactor masks for ADJ_ROOM flags and encap validation
bpf: Name the enum for BPF_FUNC_skb_adjust_room flags
...
|
|
igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2
(UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind,
a GSC proxy kernel submission can still time out; with the device wedged
and the GuC CT stopped it can never complete, so its kernel job times out.
Tile0: GT1: Kernel-submitted job timed out
WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:...
at guc_exec_queue_timedout_job()
Workqueue: gt-ordered-wq drm_sched_job_timedout
Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even
though the device is already wedged. The timeout handler then treats the
kernel queue timeout as unexpected and taints the kernel.
Honour an already-wedged device even for killed queues so the expected
teardown timeout no longer trips the WARN.
Fixes: 5a2f117a80c2 ("drm/xe: Do not wedge device on killed exec queues")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patch.msgid.link/20260814074106.92670-2-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
after execute s4, the spi error,
[ 1104.754246][ 4] [ T1] tpm_tis_spi spi-SMO0768:00: SPI transfer failed: -110
[ 1104.761503][ 4] [ T1] spi_master spi1: failed to transfer one message from queue
[ 1104.769201][ 4] [ T1] spi_master spi1: noqueue transfer failed
[ 1104.776344][ 4] [ T1] tpm_tis_spi spi-SMO0768:00: SPI transfer failed: -110
[ 1104.783609][ 4] [ T1] spi_master spi1: failed to transfer one message from queue
[ 1104.791308][ 4] [ T1] spi_master spi1: noqueue transfer failed
[ 1104.797446][ 4] [ T1] gttadd tpm_chip_start1 ret = -110
and in s4 the loongson_spi_resume&suspend are not
called at all. use DEFINE_SIMPLE_DEV_PM_OPS() add .freeze .poweroff
.thaw .restore, after s4 the spi communication is normal.
Signed-off-by: Li Jun <lijun01@kylinos.cn>
Link: https://patch.msgid.link/20260820092351.101605-1-lijun01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
aml_spisg_clk_init() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents.
Fixes: cef9991e04aed330 ("spi: Add Amlogic SPISG driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/9fb35ae0aedb7a6db0db6c78a8193c7602dd9d44.1787165329.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
map_properties() remaps the Apple properties setup_data payload
and then reads the properties header fields.
Reject a truncated payload before checking the header version and length
fields.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
ucma_query_path() emits a path record only when the remaining output
buffer is strictly larger than struct ib_path_rec_data. A buffer sized
exactly for the response header and N complete records therefore gets
only N - 1 records, while resp->num_paths still advertises N. A caller
sizing its buffer for a single record gets a header claiming one path
and no path data at all.
ucma_query_ib_service() in the same file computes the record count with
a plain division and so accepts an exact fit; make ucma_query_path()
behave the same way.
Current librdmacm is unaffected because it always sizes the response for
six records while the kernel currently reports at most two paths. Other
users of the UAPI that provide an exactly sized buffer can observe the
truncated response.
Fixes: ac53b264b2f3 ("RDMA/ucma: Support querying when IB paths are not reversible")
Signed-off-by: Serhat Kumral <serhatkumral1@gmail.com>
Link: https://patch.msgid.link/20260806201358.147478-1-serhatkumral1@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When __efi_queue_work() times out it disables runtime services and
returns, but the kworker is still blocked inside firmware. If the
firmware eventually unblocks, efi_call_rts() would run its tail on an
efi_rts_work that the timed-out caller has long abandoned: signalling a
stale completion and clearing efi_runtime_lock_owner that may by then
belong to another caller.
If runtime services have been disabled by the time the call returns,
park the worker with efi_rts_park_worker() instead, so it never touches
efi_rts_work again or returns to the workqueue.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Three wrappers call firmware directly instead of going through
__efi_queue_work(), and none of them check whether runtime services are
still enabled: virt_efi_set_variable_nb(),
virt_efi_query_variable_info_nb() and virt_efi_reset_system(). Once a
hang has cleared EFI_RUNTIME_SERVICES - or efi_recover_from_page_fault()
has cleared it on a firmware page fault - these paths still enter the
(possibly wedged) firmware, e.g. an EFI pstore write through the
non-blocking SetVariable() variant, in violation of UEFI's
non-reentrancy rules. reset_system() is reachable too: efi_reboot()
only gates it on the static efi_rt_services_supported() mask, which does
not track the runtime disable.
Check efi_enabled(EFI_RUNTIME_SERVICES) in each before calling into
firmware. Test it after taking efi_runtime_lock rather than before: the
bit is only ever cleared at runtime while that lock is held, so checking
it under the lock avoids racing with a concurrent timeout that clears the
bit and drops the lock.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
When an EFI runtime service hangs in firmware, the efi_rts_wq worker is
stuck inside the call and cannot be cancelled. __efi_queue_work() then
waits on the completion forever while holding efi_runtime_lock, so every
later EFI caller is wedged until reboot; the only symptom is a "workqueue
lockup" and tasks piling up on the semaphore.
Replace wait_for_completion() with wait_for_completion_timeout() bounded
by EFI_RTS_TIMEOUT (120 seconds). On timeout, clear EFI_RUNTIME_SERVICES
and return EFI_ABORTED so later callers fail fast at the entry check
instead of each paying another 120 seconds. The wedged worker is
intentionally leaked and keeps ownership of efi_rts_work.
A worker that only starts running after the timeout would otherwise
dereference efi_rts_work.args, now pointing into the caller's freed stack
frame, and hand stale pointers to firmware. Park it with
efi_rts_park_worker() at the entry of efi_call_rts() when runtime
services are already disabled, before it touches args or enters firmware.
Known limitation: a worker already inside firmware when the timeout fires
still holds efi_rts_args pointing into the caller's stack frame; if
firmware unblocks afterwards and writes the output buffers, they land in
reused memory. Firmware hung this long rarely recovers; a follow-up could
bounce the buffers through kmalloc.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Move the EFI_RUNTIME_SERVICES check to the top of __efi_queue_work() and
return directly, so a caller that finds runtime services disabled returns
without touching the shared efi_rts_work. No functional change.
This prepares for bounding the wait, where a timeout will clear
EFI_RUNTIME_SERVICES while the leaked worker still owns efi_rts_work; a
later caller must then bail out before reinitialising it.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Convert the queue_work() failure path in __efi_queue_work() to a
goto exit instead of falling through to the wait and the
WARN_ON_ONCE(status == EFI_ABORTED) below it. A failed queue_work()
leaves the status at its initial EFI_ABORTED, so that warning would
fire even though no call ran; it is meant for a completed call that
returned EFI_ABORTED.
No change for the common (successful enqueue) path. This also prepares
__efi_queue_work() for the timeout handling added later.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
x86's efi_crash_gracefully_on_page_fault() ends in an infinite
schedule() loop so the kworker that faulted in firmware never runs
efi_rts_wq again. A later change needs the same "park this worker
forever" primitive on the runtime service timeout path, so factor the
loop into a shared efi_rts_park_worker() and call it from the x86
page-fault handler.
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
SPI and LPI interrupts do not have an architected default value for their
IAFFID (interrupt affinity ID) - the property that determines an IRQ
affinity.
Current code awkwardly tries to set a default IAFFID value corresponding
to the logical cpu executing the gicv5_hwirq_init() function at SPI/LPI
allocation time.
There are two issues with this approach:
- gicv5_hwirq_init() is called in preemptible context and current code
uses smp_processor_id() to check the logical cpu executing the function.
Whilst that's harmless, it can spit a splat on DEBUG_PREEMPT kernels
- Setting the default SPI/LPI IAFFID to the one belonging to the cpu
executing the IRQ allocation is a completely arbitrary choice
It is saner to remove the SPI/LPI IAFFID set-up in the SPI/LPI domain IRQ
allocation code and flag SPI/LPI irqchips as IRQCHIP_AFFINITY_PRE_STARTUP
so that the SPI/LPI affinity is initialized by IRQ core to a sane value
before an IRQ is started up using the respective irq_chip
irq_set_affinity() callback.
Fixes: 5cb1b6dab2de ("irqchip/gic-v5: Add GICv5 IRS/SPI support")
Fixes: 0f0101325876 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260812-gicv5-7-2-fixes-v1-7-3743e82c69a4@kernel.org
|
|
In set-ups with a 2-level IST, L1 table entries are created dynamically
when LPIs are allocated.
The L1 allocation and mapping, implemented in gicv5_irs_iste_alloc() is
carried out in preemtible context and can be carried out on any IRS in
the system.
Current code indexes the per_cpu_irs_data per cpu array using
smp_processor_id() to retrieve the IRS that is local to the core
executing gicv5_irs_iste_alloc().
Since that's preemptible context, the core executing that function can
change on preemption. Given that every IRS in the system is equivalent
to each core, this is not really an issue in that even if the thread
is preempted and resumed on a different cpu, the table allocation and
mapping to an IRS would work seamlessly regardless.
On the other hand, smp_processor_id() spits a legitimate splat on
DEBUG_PREEMPT kernels when used in preemtible context and this should
be fixed.
Given that all IRSes are equivalent from a core perspective in terms of
IST initialization, always choose as a policy the IRS local to logical
cpu 0, preventing the smp_processor_id() splat.
Fixes: 0f0101325876 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://sashiko.dev/#/message/20260810104747.E5CE71F000E9%40smtp.kernel.org
Link: https://patch.msgid.link/20260812-gicv5-7-2-fixes-v1-6-3743e82c69a4@kernel.org
|
|
In gicv5_irs_of_init(), an IRS is set-up using of_io_request_and_map() to
request its memory region (corresponding to the configuration frame) and
map the IRS configuration frame.
On gicv5_irs_of_init() failure, the driver unmaps the IRS iomem region but
does not release the requested memory region leaving it allocated in the
iomem resource tree.
Fix it by releasing the iomem region on gicv5_irs_of_init() probe failure.
Likewise, on both OF and ACPI driver init failure, IRS iomem regions are
requested but never released in gicv5_irs_remove().
Stash a copy of the IRS iomem region in a struct resource in
struct gicv5_irs_chip_data and use it to release the requested region in
gicv5_irs_remove() if the driver probe fails.
Fixes: 5cb1b6dab2de ("irqchip/gic-v5: Add GICv5 IRS/SPI support")
Fixes: 35866efa52fe ("irqchip/gic-v5: Add ACPI IRS probing")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://sashiko.dev/#/message/20260810104747.E5CE71F000E9%40smtp.kernel.org
Link: https://patch.msgid.link/20260812-gicv5-7-2-fixes-v1-5-3743e82c69a4@kernel.org
|
|
Current code fails to disable interrupts on gicv5_starting_cpu() failure
and to set the handle_arch_irq pointer to NULL if gicv5_irs_enable() fails.
Update the respective error paths to fix them.
Fixes: 7ec80fb3f025 ("irqchip/gic-v5: Add GICv5 PPI support")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260812-gicv5-7-2-fixes-v1-4-3743e82c69a4@kernel.org
|
|
GICv5 driver probe failures cause IRSes initialized by the kernel to be
unmapped and their data structures to be destroyed but the current driver
leaves the probed IRSes enabled, whereas they should be disabled.
Disable IRSes on driver probe failures so that the IRSes are brought back
to their quiescent HW state.
Fixes: 5cb1b6dab2de ("irqchip/gic-v5: Add GICv5 IRS/SPI support")
Fixes: 35866efa52fe ("irqchip/gic-v5: Add ACPI IRS probing")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://sashiko.dev/#/message/20260810104747.E5CE71F000E9%40smtp.kernel.org
Link: https://patch.msgid.link/20260812-gicv5-7-2-fixes-v1-3-3743e82c69a4@kernel.org
|
|
In gicv5_free_lpi_domain() the LPI domain being freed can be NULL.
Check it and return before trying to free it if it is.
Fixes: 0f0101325876 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://sashiko.dev/#/message/20260810104747.E5CE71F000E9%40smtp.kernel.org
Link: https://patch.msgid.link/20260812-gicv5-7-2-fixes-v1-2-3743e82c69a4@kernel.org
|
|
In gic_acpi_parse_iaffid() a given MADT GICC entry might not correspond
to a logical cpu recognized by the kernel, resulting in the cpu variable
initialization to an error value.
Currently, the get_logical_index() return value is not checked for failure,
which might result in out-of-bounds memory corruption while trying to
index a per_cpu variable array.
Add a check to evaluate get_logical_index() return value.
Fixes: 35866efa52fe ("irqchip/gic-v5: Add ACPI IRS probing")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://sashiko.dev/#/message/20260810104747.E5CE71F000E9%40smtp.kernel.org
Link: https://patch.msgid.link/20260812-gicv5-7-2-fixes-v1-1-3743e82c69a4@kernel.org
|
|
The write disabling the GICv5 CPU interface is only guaranteed to take
effect after a context synchronization event. Without one, execution can
return from gicv5_cpu_disable_interrupts() while an interrupt is still
able to be taken.
Add an ISB after the ICC_CR0_EL1 write to ensure interrupts are
disabled before the function returns. No corresponding ISB is added
when enabling the interface, as interrupt delivery is asynchronous and
there is no obvious benefit to waiting for it.
Fixes: 7ec80fb3f025 ("irqchip/gic-v5: Add GICv5 PPI support")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://sashiko.dev/#/patchset/20260724104819.1296803-1-sascha.bischoff@arm.com?part=6
Link: https://patch.msgid.link/20260811152630.942023-3-sascha.bischoff@arm.com
|
|
IRS affinity setup publishes an IRS pointer and IAFFID state in the
per-CPU data before the remaining IRS initialization can fail. The
error path then frees the IRS data without clearing that published
state, leaving CPUs associated with freed memory.
On initialization failure and normal IRS teardown, clear the per-CPU
IRS association by removing the stale pointer to irs_data. Also
invalidate the per-CPU IAFFID state for any CPUs that were tied to the
IRS before it was freed.
Fixes: 5cb1b6dab2de ("irqchip/gic-v5: Add GICv5 IRS/SPI support")
Fixes: 35866efa52fe ("irqchip/gic-v5: Add ACPI IRS probing")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://sashiko.dev/#/patchset/20260724104819.1296803-1-sascha.bischoff@arm.com?part=2
Link: https://patch.msgid.link/20260811152630.942023-2-sascha.bischoff@arm.com
|
|
The INTC0 interrupt-merge (INTM) space has 50 sources at 10 per bank, i.e.
INTC0_INTM_NUM / INTM_IRQS_PER_BANK = 5 banks. This is reflected everywhere
the banks are indexed: the aspeed_intc0_intm_routes[] table has 5 valid
entries, and the mask/unmask/eoi paths compute the bank as (hwirq -
INTM_BASE) / INTM_IRQS_PER_BANK, spanning banks 0-4.
However, INTC0_INTM_BANK_NUM is hardcoded to 3, so
aspeed_intc0_disable_intm() only clears IER for banks 0-2 at probe. Banks 3
and 4 are left in whatever state the firmware configured them , which can
leave interrupts enabled before a handler is installed.
Derive the bank count from the source count so the probe-time disable
covers every bank.
Fixes: 07825e41519a ("irqchip/ast2700-intc: Add AST2700-A2 support")
Signed-off-by: Michael Pesa <michael.pesa@icloud.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260722050243.298355-1-michael.pesa@icloud.com
|
|
mpfs_cfg_clk_set_rate() passes the mask and value arguments to
regmap_update_bits() in the wrong order. The resulting write becomes
reg = orig_reg | val, causing bits to not be cleared if the clock
divider changes.
Pass the arguments in the correct order so the divider field is updated
as intended.
Fixes: c6f2dddfa7f9 ("clk: microchip: mpfs: use regmap for clocks")
Signed-off-by: Pedro Kopper <pedro.kopper@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
visconti_clk_register_gate() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents.
Fixes: b4cbe606dc3674b2 ("clk: visconti: Add support common clock driver and reset driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
_register_mux() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter is uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents.
Fixes: 667f420c09f1417c ("clk: ti: mux: resolve parent clocks by DT index, not by name")
Closes: https://lore.kernel.org/CAMuHMdU3yVqoyHC4eNF2NuYo8wy+6ODLoYat4R71X99Mxc_=kw@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Linux 7.2
There was a lot of conflicts this round between fixes and next,
and I'd like to get the merge resolutions that we have in drm-tip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Add af_alg_restrict sysctl and white list
- Fix potential suspend/resume races in hwrng
Algorithms:
- Optimize vli additive operations using compiler builtins in ecc
Drivers:
- Remove unsafe/deprecated algorithms from qce
- Mark qce as BROKEN
- Add runtime PM and interconnect bandwidth scaling support to qce
- Remove crypto_rng from qcom, sun8i and caam
- Fix SG list issues in iaa
- Fix SEV init path bugs in ccp"
* tag 'v7.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (122 commits)
crypto: lskcipher - propagate errors from unaligned crypt
crypto: keembay - use crypto_memneq() to compare CCM AEAD tags
crypto: keembay - use crypto_memneq() to compare GCM AEAD tags
crypto: sa2ul - use crypto_memneq() to compare AEAD tag
hwrng: drivers - use named initializers for acpi_device_id
crypto: qce - fix CCM AAD buffer underallocation
crypto: iaa - unmap dst before software fallback on decompress
crypto: iaa - use bounce buffer for multi-sg decompress input
crypto: iaa - avoid counting fallback decompression bytes
crypto: iaa - fall back to software for multi-entry scatterlists
hwrng: core - Stop/start hwrng_fillfn() kthread before/after suspend-resume
crypto: hisilicon/sec2 - fix CCM algorithm long packet failure
crypto: eip93 - use struct_size() and flexible array for ring allocation
crypto: krb5 - use kfree_sensitive() for derived key buffers
crypto: af_alg - Stop after finding name in allowlist
crypto: af_alg - Replace 'bool privileged' with flags
crypto: af_alg - Make cbc(paes) privileged-only
hwrng: imx-rngc - Disable clock on registration failure
crypto: qat - remove dead ADF_HEX code
crypto: qce - simplify qce_handle_request
...
|
|
gamecube_rtc_probe() ignored the return value of
devm_rtc_register_device() and always returned success. Propagate the
error so probe fails when RTC registration fails.
Fixes: 86559400b3ef ("rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U")
Signed-off-by: Linkai Gong <gonglinkai@kylinos.cn>
Link: https://patch.msgid.link/20260731080458.417532-1-gonglinkai@kylinos.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
