| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit d4c22d70d7253dd727c71484c58d504f6c630343.
There is no netdev queue left to wake after reverting
commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-5-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit baf808fe4fcd35767ab732b4ab2ea80dabfd97a6.
There is no netdev queue left to wake after reverting
commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-4-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 1d6e569b7d0c0b2736636749e4be0a27f3cefcb3.
The commit stops the netdev queue when the ptr_ring is full instead of
dropping the packet. My own tests showed no relevant regression, but on
Brett Sheffield's librecast testbed an IPv6 multicast testcase got
slower. With 8 iperf3 TCP threads sending, the throughput dropped from
13.5 Gbit/s to 9.13 Gbit/s.
Reported-by: Brett Sheffield <brett@librecast.net>
Closes: https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-2-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Much quieter, thankfully:
- a set of ath12k fixes, including a recent
MLO regression for WCN7850/QCC2072
- iwlegacy gets rid of a BUG_ON that triggered
- a couple more robustness/security fixes
* tag 'wireless-2026-07-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlegacy: replace BUG_ON() with WARN_ON() on num_stations check
wifi: mac80211: validate individual TWT params before driver setup
wifi: cfg80211: publish PMSR request before starting the driver
wifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames
wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie()
wifi: mac80211: fix tid_tx use-after-free on BA session stop
wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event
wifi: ath12k: defer dp_peer registration when firmware allocates MLD peer ID
wifi: ath12k: do not advertise MLD peer ID for firmware-allocate devices
wifi: ath12k: introduce host_alloc_ml_id hardware parameter
wifi: ath12k: add support for HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP
wifi: ath12k: keep ATH12K_PEER_ML_ID_VALID set in ath12k_sta::ml_peer_id
wifi: ath12k: factor out peer assoc send-and-wait into a helper
wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
====================
Link: https://patch.msgid.link/20260729071954.45655-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, each ath12k AHB device maintains its own RootPD-related
information. However, RootPD is shared across all UserPD devices, so
RootPD-related operations such as RootPD boot, and notifier registration,
should be performed only once during the first UserPD boot up.
Due to per-device RootPD information, the driver is unable to track
shared RootPD state across multiple UserPDs, which can result in these
operations being performed multiple times.
Fix this by introducing a new ath12k_ahb_rproc_info structure to hold
shared RootPD-related information such as notifier callbacks, boot
state, and number of userPD.
Allocate this structure during the first device probe in
ath12k_ahb_rproc_info_alloc() and reuse the same structure for all
subsequent device probes.
Also handle rproc deconfiguration correctly when multiple UserPDs share a
common RootPD. The RootPD provides shared firmware services and resources
for all UserPDs. Therefore, do not shut down the RootPD while any UserPD
remains powered on or is still in the boot process.
In addition, a UserPD can be powered down before its associated resources
are fully released. Defer g_rproc_info cleanup until all UserPD-related
state and resources have been cleaned up.
For intermediate UserPD removal, cleanup only per-device information
and remove the UserPD from the tracking array while keeping the RootPD
running for remaining active UserPDs.
Note: UserPD IDs start from 1, as ID 0 is used by RootPD, which is
completely handled by the remoteproc driver.
The multi-PD architecture on AHB platforms operates as follows:
+-----------------------------+
| Q6 RootPD (rproc) |
| (Shared Resource) |
| |
| - Manages UserPD lifecycle |
| - Provides SSR notifiers |
+--------------+--------------+
|
| Manages
|
+---------------------+---------------------+
| | |
+----v----+ +----v----+ +----v----+
| UserPD1 | | UserPD2 | | UserPD3 |
| ID=1 | | ID=2 | | ID=3 |
| (Radio) | | (Radio) | | (Radio) |
+---------+ +---------+ +---------+
| | |
| | |
ath12k_ahb ath12k_ahb ath12k_ahb
(device 1) (device 2) (device 3)
| | |
+---------------------+---------------------+
|
| All reference
|
+---------v----------+
| ath12k_ahb_rproc_ |
| info (shared) |
| |
| - tgt_rproc |
| - notifiers |
| - rootpd_ready |
| - num_userpd |
| - userpd[] array |
+--------------------+
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260721065038.126046-3-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
AHB-based platforms associate each device with a userPD ID that determines
the firmware name and Peripheral Authentication Service ID (PASID) used
during firmware authentication.
Current implementation does not support platforms with multiple devices
sharing the same compatible string but using different userPD IDs.
As a result, the driver cannot uniquely identify each device for firmware
selection and authentication.
Add an AHB platform descriptor to store device-specific configuration.
Implement userPD ID resolution by matching device tree reg properties, with
node name matching as a fallback. Centralize platform configuration to
simplify the probe path by removing hardware-specific conditionals.
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260721065038.126046-2-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In ath12k_wifi7_mac_op_tx(), the MLO multicast broadcast path iterates
over all active links and copies the original skb for transmission on
each link. When firmware crash recovery is underway (ATH12K_FLAG_CRASH_FLUSH
set), the per-link copy is allocated and partially processed before
ath12k_wifi7_dp_tx() eventually rejects it with -ESHUTDOWN.
This wastes GFP_ATOMIC memory and produces spurious "failed to transmit
frame" warnings for every active MLO link during the recovery window.
The unicast and non-MLO paths are unaffected: they call ath12k_wifi7_dp_tx()
directly, which already guards against the flag at its entry.
Skip any link whose associated ath12k_base has ATH12K_FLAG_CRASH_FLUSH set
before performing the skb_copy(), matching the behaviour of
ath12k_wifi7_dp_tx() but avoiding the unnecessary allocation entirely.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Pavankumar Nandeshwar <pavankumar.nandeshwar@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260723054653.2794550-1-pavankumar.nandeshwar@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, the RX release ring size is hardcoded to 1024 entries via
DP_RX_RELEASE_RING_SIZE. This value was sufficient for older generations,
but is not adequate for Wi-Fi 7 scenarios with higher aggregation,
parallel processing, and increased likelihood of error bursts.
In Wi-Fi 7, a PPDU can carry up to 1024 MPDUs and each MPDU may contain
multiple MSDUs. In error scenarios such as REO out-of-order (OOR) events,
a large number of MSDUs can be pushed to the RX release ring in a short
duration. With multiple PPDUs being processed in parallel (e.g. multi-core
or MLO scenarios), this can lead to significant bursts of descriptors.
Field observations have shown frequent OOR conditions and back-pressure
issues with smaller ring sizes. Increasing the RX release ring size helps
absorb these bursts and avoids back-pressure in the RXDMA/REO pipeline.
Without sufficient ring capacity (e.g. 16K), back-pressure was observed
under stress conditions.
To address this, make the RX release ring size configurable per memory
profile by adding rx_release_ring_size to ath12k_dp_profile_params:
- Default memory profile: 16384 entries
- Low memory profile (512M): 8192 entries
The larger size in the default profile improves robustness under high
traffic and error conditions by reducing the probability of ring overflow
and pipeline stalls. The reduced size in the low memory profile balances
memory usage while still providing sufficient headroom compared to the
previous fixed value.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pavankumar Nandeshwar <pavankumar.nandeshwar@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260721110459.2203038-1-pavankumar.nandeshwar@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The enumerator names ATH12K_FIRMWARE_MODE_* lack the QMI infix that all
other constants in qmi.h use (ATH12K_QMI_FILE_TYPE_*,
ATH12K_QMI_BDF_TYPE_*, ATH12K_QMI_MEMORY_MODE_*, etc.). Rename them to
ATH12K_QMI_FIRMWARE_MODE_* for consistency and to prevent a future
re-introduction of ATH12K_FIRMWARE_MODE_* names causing a silent collision.
While here, add a comment noting that values 2-3 are reserved by the
firmware QMI ABI to explain the gap before ATH12K_QMI_FIRMWARE_MODE_OFF = 4.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Assisted-by: Claude:claude-sonnet-4-6
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260725-consolidate-firmware_mode-v1-2-aedff0ce0ba5@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The enum ath12k_firmware_mode defines values that are part of the QMI
ABI, so it belongs in qmi.h rather than core.h. Consolidate it there
along with ATH12K_FIRMWARE_MODE_OFF, which is currently a bare macro.
Rename the enum to ath12k_qmi_firmware_mode to align with the naming
convention of the other enums in qmi.h, and place it with the other
ath12k_qmi_* enums.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Assisted-by: Claude:claude-sonnet-4-6
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260725-consolidate-firmware_mode-v1-1-aedff0ce0ba5@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The outer skb->len guard only confirms the SKB is large enough
to hold the full fixed_param struct, but the TLV's own WMI_TLV_LEN
field is never checked. Firmware advertising a TLV length shorter
than sizeof(*fixed_param) causes reads of pdev_id and event_count
beyond the declared TLV payload.
Add a check that the TLV length is at least sizeof(*fixed_param)
before casting and dereferencing the pointer.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Assisted-by: Claude:claude-sonnet-4-6
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260726-ath12k_wmi_process_tpc_stats-len-check-v1-1-c4ba2f84d9c6@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so
the parse infrastructure does not enforce a minimum length for the event
struct. Additionally, the num_vdevs field is taken directly from firmware
and used as a loop bound over the vdev_ids array without checking that it
fits within the TLV payload. Either condition can cause an out-of-bounds
read.
Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so
the parse infrastructure enforces a minimum length for the fixed-size event
struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload
length of a parsed TLV from the header preceding its data pointer. Use it
in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before
the loop.
Compile tested only.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Assisted-by: Claude:claude-sonnet-4-6
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724-ath12k_wmi_process_csa_switch_count_event-cleanup-v2-2-02a45d7246c0@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so
the parse infrastructure does not enforce a minimum length for the event
struct. Additionally, the num_vdevs field is taken directly from firmware
and used as a loop bound over the vdev_ids array without checking that it
fits within the TLV payload. Either condition can cause an out-of-bounds
read.
Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so
the parse infrastructure enforces a minimum length for the fixed-size event
struct. Add a helper ath12k_wmi_tlv_data_len() to recover the payload
length of a parsed TLV from the header preceding its data pointer. Use it
in ath12k_wmi_process_csa_switch_count_event() to bound num_vdevs before
the loop.
Compile tested only.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Assisted-by: Claude:claude-sonnet-4-6
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724-ath12k_wmi_process_csa_switch_count_event-cleanup-v2-1-02a45d7246c0@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ovpn_fill_info emits IFLA_OVPN_MODE inside IFLA_INFO_DATA, but
ovpn_link_ops does not provide a get_size callback. Consequently,
rtnetlink's size estimate for ovpn link messages does not include the
nested mode attribute.
Available skb tailroom may hide this mismatch. When the remaining space
is insufficient, however, ovpn_fill_info returns -EMSGSIZE and message
construction fails.
Add the callback and account for IFLA_OVPN_MODE.
Fixes: c2d950c4672a ("ovpn: add basic interface creation/destruction/management routines")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
ems_usb_read_bulk_callback() walks CPC messages packed in one USB
receive buffer.
Check that each declared message fits in the URB payload. Also require the
type-specific payload to cover the fields used by the CAN, state, error and
overrun handlers.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260706092752.79600-1-pengpeng@iscas.ac.cn
Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
resubmit failure
es58x_read_bulk_callback() resubmits the RX URB after processing a received
packet. If the resubmit succeeds, the URB remains anchored and will be
handled by the normal RX path or by teardown.
However, if usb_submit_urb() fails, the callback unanchors the URB and then
returns directly. This skips the existing free_urb path, so the coherent
transfer buffer allocated with usb_alloc_coherent() is not released.
Reuse the existing free_urb path after a resubmit failure so that the RX
coherent buffer is freed before leaving the callback.
Fixes: 5eaad4f76826 ("can: usb: etas_es58x: correctly anchor the urb in the read bulk callback")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260706014601.415445-1-lgs201920130244@gmail.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
failure
If the allocation of the SKB in gs_usb_receive_bulk_callback() fails, the
driver returns from the callback without resubmitting the URB in order to
receive further USB in URBs.
This results in a silent performance degradation which, if it occurs
repeatedly, results in starvation of USB in traffic.
Instead of returning immediately, try to resend the URB. If this also
fails, this is logged as an info message.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Fixes: 26949ac935e3 ("can: gs_usb: add CAN-FD support")
Link: https://patch.msgid.link/20260709-gs_usb-resubmit-urb-v1-1-4dd40030cc84@pengutronix.de
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
bittiming is configured
c_can_chip_config() was programming C_CAN_CTRL_REG without CONTROL_INIT,
which may allow the controller to become active before
c_can_set_bittiming() finishes.
That creates a short timing window where the peripheral can interact with
the bus using a different/default bitrate, potentially generating bus
errors and corrupting traffic.
Set CONTROL_INIT together with the control-mode writes in
c_can_chip_config() (normal, loopback and listen-only paths), so the
controller stays halted until bit timing is fully programmed.
This prevents transient bus disturbance during startup when the configured
bitrate differs from the active bus bitrate.
Signed-off-by: Lucas Martins Alves <lucas.alves@lumal21.com.br>
Link: https://patch.msgid.link/20260714164839.771123-1-lucas.alves@lumal21.com.br
Fixes: 881ff67ad450 ("can: c_can: Added support for Bosch C_CAN controller")
Cc: stable@kernel.org
[mkl: remove space before close parenthesis]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
fw_parse() reads a fixed record header, a firmware-provided payload,
and a trailing checksum without knowing the end of the firmware blob. A
truncated record can therefore make those reads exceed the blob.
The same record also supplies addresses and lengths for writes into
DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its
bounds check, while the application loader does not bound the staging
copy at all.
Pass the firmware end to the parser and validate the full source record.
Use a signed wide offset for generic DPRAM records and validate the
application staging span against the mapped DPRAM before copying.
Fixes: 03fd3cf5a179 ("can: add driver for Softing card")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260722044347.2708-1-pengpeng@iscas.ac.cn
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Testing CANFD on RZ/G3E shows that many registers do not reset to their
initial values with the current flow of deasserting resets first and then
enabling clocks.
Based on the HW manual, clocks should be supplied first and the
resets deasserted afterward.
section 7.4.3 Procedure for Activating Modules: RZ/G2L
section 4.4.9.3 Procedure for Starting up Units: RZ/G3E
So, update the order of the initializing flow for resets and clocks
to match the hardware manual, resetting all CANFD registers to their
initial values. Also update rcar_canfd_global_deinit() to assert
resets before disabling clocks, so the teardown path mirrors the new
init ordering.
Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family")
Signed-off-by: Tu Nguyen <tu.nguyen.xg@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260625135216.130450-1-biju.das.jz@bp.renesas.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
extents
The wait and bulk receive paths walk variable-length commands from a
USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be
dispatched, and the wait path copies a matching command into a fixed
caller-owned struct kvaser_cmd using the device-provided length.
Reject nonzero commands that do not contain the fixed header or that
extend beyond the current USB buffer item. In the wait path, also reject
a matching command that exceeds the destination before copying it.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260722042221.44066-1-pengpeng@iscas.ac.cn
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
kvaser_usb_hydra_get_busparams()
The memory allocated for cmd is not freed after the call to
kvaser_usb_send_cmd() in both the normal and error paths.
Fix that by adding a kfree() immediately after the call.
Fixes: 39d3df6b0ea8 ("can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260722103906.108571-1-nihaal@cse.iitm.ac.in
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
pcan_usb_fd_decode_buf() walks uCAN records packed in one USB
receive buffer.
Require each record to contain the fixed header for its type, and verify
CAN payload bytes before copying them into the skb.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260706092836.79754-1-pengpeng@iscas.ac.cn
Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
submit error
In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()
and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also
frees the transfer buffer.
If usb_submit_urb() fails, the error path frees the buffer explicitly with
kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,
usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double
free of the transfer buffer.
BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0
Free of addr ffff8881069ccb80 by task trigger.sh/285
Call Trace:
kfree+0x113/0x3c0
usb_free_urb.part.0+0x91/0xb0
Drop the redundant kfree(buf); usb_free_urb() already releases the transfer
buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free
issue with interrupt buffer allocation").
Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Closes: https://lore.kernel.org/linux-can/178159320216.2154888.16953451793788581739@maoyixie.com/T/#u
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/178163373110.2507866.216458825145756798@maoyixie.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The channel control index ctrl_idx is derived from rx->len which comes
directly from a device USB payload. The mask 0x0f allows values 0-15, but
the array size of usb_if->dev[] is only 2. Values 2-15 cause heap
out-of-bounds read, eventually causing kernel panic in the IRQ context.
Add bounds checking for ctrl_idx before the array access in both
pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error().
Fixes: d8a199355f8f ("can: usb: PEAK-System Technik PCAN-USB Pro specific part")
Signed-off-by: James Gao <jamesgao5@outlook.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/TYWPR01MB8559DBAAAA6A7F410400329CF0012@TYWPR01MB8559.jpnprd01.prod.outlook.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver has a match table for the pci bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the driver registration structure, and the missing module alias
publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20260704151957.48194-1-pengpeng@iscas.ac.cn
Fixes: 792a5b678e81 ("can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support.")
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use self-test mode for CAN_CTRLMODE_PRESUME_ACK so transmitted
frames can complete without receiving an ACK.
ACK forbidden mode prevents the controller from acknowledging
received frames and does not implement the presume-ack behavior.
Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Signed-off-by: Avi Weiss <thnkslprpt@gmail.com>
Acked-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20260722192726.230729-1-thnkslprpt@gmail.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Include REG_INT_STAT_BEI in the top-level error interrupt condition.
BEI is enabled when CAN_CTRLMODE_BERR_REPORTING is requested and
ctucan_err_interrupt() already handles it. Without checking and
clearing BEI in the top-level handler, bus error interrupts are not
handled or acknowledged.
Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Signed-off-by: Avi Weiss <thnkslprpt@gmail.com>
Acked-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20260723074403.131575-1-thnkslprpt@gmail.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In the CAN_STATE_ERROR_ACTIVE case, cf->data[1] is set to
CAN_ERR_CRTL_ACTIVE, but cf->can_id is not set with CAN_ERR_CRTL in
that path.
Set CAN_ERR_CRTL so consumers know the controller-status information
in cf->data[1] is valid.
Fixes: 9bd24927e3ee ("can: ctucanfd: handle skb allocation failure")
Signed-off-by: Avi Weiss <thnkslprpt@gmail.com>
Link: https://patch.msgid.link/20260723155543.318414-1-thnkslprpt@gmail.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
BAR0 is mapped into bar0_base, while cra_addr points to an offset
within that mapping and is used for other purposes.
Pass bar0_base to pci_iounmap(), instead of cra_addr, on the probe error
path so the address returned by pci_iomap() is used for unmapping.
Fixes: 792a5b678e81 ("can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support.")
Signed-off-by: Avi Weiss <thnkslprpt@gmail.com>
Acked-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20260723095934.181042-1-thnkslprpt@gmail.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
sxgbe_open() ignores the return value of init_dma_desc_rings() and
continues to program DMA with invalid ring addresses when allocation
fails. Check the return value and disconnect the PHY on failure.
Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When RX descriptor ring allocation fails, init_dma_desc_rings() only
frees the partially allocated RX rings and returns. The TX rings that
were allocated earlier in the same function are leaked.
Rearrange error labels to clean up TX rings upon RX failures.
Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
chan_sem's read-side lock is taken under another mutex, so there is no
benefit in keeping it as an rwsem. Replace the rwsem with a mutex.
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260727032802.4090-1-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND.
Fixes: 94d942c5fb97 ("octeontx2-af: Config pkind for CGX mapped PFs")
Cc: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260722081229.1653619-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In phylink_create() if phylink_register_sfp() returns an error, link_gpio
obtained by phylink_parse_fixedlink() is never released. While this is a
very unlikely scenario, it's worth to fix/handle this.
This was present from the very first implementation of phylink but got
relevant only with the introduction of ce0aa27ff3f6 ("sfp: add sfp-bus to
bridge between network devices and sfp cages") where additional function
were added after phylink_parse_fixedlink() making the release of link_gpio
needed if such additional function errored out.
While at it, restructure the exit condition of phylink_create() with the
goto pattern to reduce code duplication on handling error conditions.
Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260726150806.2437-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the e1000_probe() path, e1000_sw_init() allocates adapter->tx_ring and
adapter->rx_ring. If the subsequent CE4100-specific MDIO BAR mapping
fails, the error handling jumps past the ring cleanup code, leaking both
allocations.
Fix this leak by moving the err_mdio_ioremap label above the ring
deallocation logic. This guarantees the proper release of these resources
and prevents the memory leak.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
CE4100 reference platform to test with, no runtime testing was able to
be performed.
Fixes: 5377a4160bb65 ("e1000: Add support for the CE4100 reference platform")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented before each frag mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping (the head) would leak.
This bug was introduced by a 2010 fix for an endless loop in dma_error.
All other affected drivers have already been fixed.
Fixes: c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-4-7-opus
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When an AF_XDP zero-copy application is killed abruptly, the XSK pool is
torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the
full budget on every poll, so napi_complete_done() never clears
NAPI_STATE_SCHED.
igc_down() calls napi_synchronize() before napi_disable(), so it spins
forever waiting for that bit and the interface never goes down. Drop the
napi_synchronize() and let napi_disable() do the job -- it sets
NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it
ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after
polling has stopped, matching the recent igb fix b1e067240379.
Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Tested-by: Moriya Kadosh <moriyax.kadosh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
During reset recovery, the admin queue returns EBUSY which is expected
behavior. However, the DPLL subsystem was logging these as errors and
incrementing the error counter, potentially leading to unnecessary
warnings and even disabling the DPLL periodic worker if the threshold
was reached.
Suppress error logging and error counter increments when the admin
queue returns EBUSY, as this is expected during reset recovery and
not a real failure condition.
test case:
- ethtool --reset eth3 irq-shared dma-shared filter-shared offload-shared
mac-shared phy-shared ram-shared
- observe if dmesg EBUSY errors are gone
Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu")
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ice_lbtest_prepare_rings() frees Rx rings only when
ice_vsi_start_all_rx_rings() fails. If ice_vsi_setup_rx_rings() fails
after allocating some descriptors, or if ice_vsi_cfg_lan() fails after
the Rx rings were prepared, the function reaches the Tx cleanup path
without releasing the initialized Rx resources.
Fix this by adding separate unwind paths for Rx setup failure and LAN
configuration failure. The Rx setup failure path releases the partially
prepared Rx rings before freeing Tx rings, while later failures first
undo the LAN Tx configuration and then release the Rx rings in reverse
setup order.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
Intel E800 Series adapter available to run the ethtool offline loopback
selftest, no runtime testing was able to be performed.
Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a virtual function sends an IRQ map command, the PF will set up
interrupts according to that request. However, because these interrupts are
never reset, the next time Virtual Function initializes, the interrupts are
still enabled for a given VF, which leads to performance degradation in
certain cases due to interrupts being unexpectedly enabled and thus causing
interrupt floods.
Cc: stable@vger.kernel.org
Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support")
Suggested-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ice_resume() schedules an asynchronous PF reset and returns
immediately. The reset runs later in ice_service_task(). If
userspace tries to bring up the net device before the reset
finishes, ice_open() fails with -EBUSY:
ice_resume()
ice_schedule_reset() # sets ICE_PFR_REQ, returns
...
ice_open()
ice_is_reset_in_progress() # ICE_PFR_REQ still set, -EBUSY
...
ice_service_task()
ice_do_reset()
ice_rebuild() # clears ICE_PFR_REQ, too late
Reproduced on E800 series NICs during suspend/resume with irdma
enabled, where the aux device probe widens the race window.
ice 0000:81:00.0: can't open net device while reset is in progress
Add a best-effort wait (10s timeout, matching ice_devlink_info_get())
for the reset to complete before returning from ice_resume(). In
practice the reset completes in ~300ms.
Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL")
Cc: stable@vger.kernel.org
Reviewed-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf_mb_intr_req_irq() allocates the mailbox IRQ name before calling
request_irq(). On success, the name is released later through
kfree(free_irq()), but request_irq() failure returns without freeing it.
Free the allocated name on the request_irq() failure path.
Fixes: 4930fbf419a7 ("idpf: add core init and interrupt request")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Set the TxQ ring count minimum to 128 descriptors. Any lower than this,
and the queue will stall and trigger Tx timeouts in flow based
scheduling mode. This is because next_to_clean might never be updated.
In flow based scheduling mode, next_to_clean is only updated after a
descriptor completion is processed, i.e. after the RE bit is set in the
last descriptor of a Tx packet. This will never happen with a ring size
of 64 and an IDPF_TX_SPLITQ_RE_MIN_GAP of 64. No matter what the value
of last_re is initialized/set to, the calculated gap will be at most 63
and never trigger the RE bit.
Even a ring size of 96 does not solve this. Because of how infrequent
next_to_clean is updated and how small the ring is, IDPF_DESC_UNUSED
will be much smaller on average. This increases the chance the queue
will be stopped because a multi-descriptor packet, e.g. a large LSO
packet, does not see enough resources on the ring. In this case, the
queue will trigger the stop logic. The queue permanently stalls because
there is no chance for a descriptor completion to update next_to_clean
since it is dependent on a packet being sent.
Fixes: 5f417d551324 ("idpf: replace flow scheduling buffer ring with buffer pool")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from
the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding
its inner loop only by the per-chunk num_vectors. The array is sized
separately: idpf_intr_reg_init() allocates
kzalloc_objs(struct idpf_vec_regs, total_vecs) from
caps.num_allocated_vectors and only checks the returned count after the
fill. The sum of per-chunk num_vectors is never reconciled against
total_vecs, so a reply with a small num_allocated_vectors but chunks
summing higher writes past the end of reg_vals[].
Impact: a control plane (a PF or hypervisor device model) that returns a
VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds
num_allocated_vectors writes struct idpf_vec_regs entries past the end of
the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write).
Bound the fill loop to the array capacity passed in by the callers,
mirroring the sibling idpf_vport_get_q_reg(). The existing
num_regs < num_vecs check then rejects an undersized reply without the
out-of-bounds write happening first.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
pci_device_id is not guaranteed to live longer than probe due to presence
of dynamic ID. This stored ID is unused so remove it.
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260723-pci_id_fix-v4-4-3580726844e1@garyguo.net
|
|
The MWIFIEX_WORK_QUEUE handles command and event processing, including
the commands used for scheduled scans.
Running this work on the high-priority worker pool can interfere with
latency-sensitive workloads. On an i.MX8MP-based audio system using an
88W8997, background scheduled scans caused audible glitches in USB
audio playback.
Remove WQ_HIGHPRI from the main workqueue so that command and scan
processing use the normal-priority worker pool.
Leave the RX and host MLME workqueues unchanged.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Link: https://patch.msgid.link/20260724203320.78793-2-festevam@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mwifiex synchronous commands keep the caller-provided data buffer in
cmd_node->data_buf. Several callers pass stack-allocated objects there.
If wait_event_interruptible_timeout() is interrupted, the caller can
return and release that stack object while the firmware command is still
the current command. A late firmware response then reaches the normal
response handler, which can copy data through cmd_node->data_buf into the
stale stack address.
This fixes a stack corruption observed during repeated association and
disassociation cycles. The panic trace showed the command wait being
interrupted immediately before a bad pointer dereference:
cmd_wait_q terminated: -512
Unable to handle kernel paging request at virtual address 002c583837384662
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted
...
Tainted: [M]=MACHINE_CHECK
The fault address decodes as little-endian ASCII:
0x002c583837384662 -> "bF878X,\0"
which is a fragment of the VERSION_EXT firmware string exposed as
debugfs "verext":
w8997o-V4, RF878X, FP92, 16.92.21.p153.7
The same runs also showed corrupted control data containing:
0x2400372e333531 -> "153.7\0$"
which is the tail of the same VERSION_EXT string. This points at a late
VERSION_EXT response writing through a stale stack-backed data_buf after
the interrupted wait returned.
After cancelling pending commands on an interrupted or timed-out wait,
detach the caller-owned data buffer from the still-current command. This
preserves the existing command cancellation behaviour while preventing a
late response from writing through a pointer whose lifetime ended with the
waiting caller.
Tested on an i.MX8MP board using an 88W8997.
Cc: stable@vger.kernel.org
Fixes: 3d026d09b28d ("mwifiex: cancel pending commands for signal")
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Link: https://patch.msgid.link/20260724203320.78793-1-festevam@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
nxpwifi_update_bss_desc_with_ie() dispatches on elem->data[0] for
WLAN_EID_EXTENSION without checking that the element has a payload.
A well-formed extension element carries at least the element ID
extension byte, but nothing enforces that in the IE stream, and the
loop accepts a zero-length element because its header alone fits.
elem->data[0] then reads the byte after the element, which is past the
kmemdup()ed IE buffer when that element ends the stream.
Fixes: 73b01e57ed3e ("wifi: nxp: add nxpwifi driver for IW61x")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Link: https://patch.msgid.link/20260724103656.2494129-1-lilinmao@kylinos.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
wifi: iwlwifi: updates - 2026-07-23
This comtains the usual features, fixes and cleanups. Notably:
- Small fixes of bugs reported by LLMs
- LARI command version 14 and 15
- MCC command version 10
- Support for core 107
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
