| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
rswitch_get_port_node()
On an of_property_read_u32() failure, rswitch_get_port_node() set port
to NULL and jumped to the out label before releasing the reference the
for_each_available_child_of_node() iterator was holding on it. Once
port was overwritten with NULL, that reference could never be
released since out: only put "ports", the parent node.
Rework the function around for_each_available_child_of_node_scoped()
instead of adding a manual of_node_put(), so the iterator's reference
is dropped automatically on every exit path. Since port is the
function's return value, take an explicit reference with of_node_get()
on the match before breaking out of the loop.
Signed-off-by: Manush Prajwal <manushprajwal555@gmail.com>
Link: https://patch.msgid.link/6a882352.ee10049a.267d65.7a31@mx.google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ENETC v4 has the same problem as ENETC v1: the RX BD ring congestion
mode (CM) is only configured in the phylink .mac_link_up() callback, so
it is cleared when enetc_reconfigure() rebuilds the RX BD rings at
runtime (for example when enabling or disabling PTP RX hardware
timestamping) without a link status change, and it is never restored.
As a result, the MAC can no longer generate PAUSE frames on ingress
congestion and flow control stops working.
Fix it in the same way as ENETC v1. Track the desired CM state in the
software flag ENETC_RXBDR_CM. Route enetc4_set_tx_pause() through the
shared helper enetc_set_congestion_mode(), which sets or clears the flag
according to tx_pause and updates the ENETC_RBMR_CM bit under si->gen_lock.
When the RX BD rings are (re)enabled, enetc_enable_rxbdr() consults this
flag and restores the CM bit accordingly, so flow control survives ring
reconfiguration even when the link status does not change.
Fixes: f5b9a1cde0a2 ("net: enetc: add PTP synchronization support for ENETC v4")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260821064140.1315611-3-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RX ring congestion mode (CM) is only configured in the phylink
.mac_link_up() callback enetc_pl_mac_link_up(), which sets the
ENETC_RBMR_CM bit when tx_pause is enabled. This callback runs only when
the link status changes.
However, enetc_reconfigure() tears down and re-creates the RX BD rings at
runtime without any link status change, for example when attaching or
detaching an XDP program, or when enabling/disabling PTP RX hardware
timestamping. The rings are rebuilt from a cleared RBMR, so the CM bit is
lost. Since the link status does not change, enetc_pl_mac_link_up() is
not called again and the CM bit is never restored.
As a result, the ENETC MAC can no longer generate PAUSE frames on ingress
congestion, and flow control stops working after such a reconfiguration.
Track the desired CM state in a software flag ENETC_RXBDR_CM. Set or clear
this flag in enetc_pl_mac_link_up() according to tx_pause. When the RX BD
rings are (re)enabled, enetc_enable_rxbdr() consults this flag and restores
the ENETC_RBMR_CM bit accordingly, so flow control survives ring
reconfiguration even when the link status does not change.
RBMR is now written as a whole word from enetc_enable_rxbdr() rather than
by read-modify-write from several call sites. Serialize the remaining RBMR
read-modify-write paths, the congestion mode update and the RX VLAN offload
update, with the new si->gen_lock so they cannot race each other.
Fixes: 5093406c784f ("net: enetc: implement ring reconfiguration procedure for PTP RX timestamping")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260821064140.1315611-2-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clear and restore the ENA bit for each TL3/TL2 link entry during
SMQ flush instead of repeatedly using the same link index.
Fixes: 019aba04f08c ("octeontx2-af: Modify SMQ flush sequence to drop packets")
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260821055445.2517568-1-nshettyj@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In stmmac_mtl_setup(), q_node is shared across the RX and TX queue
parsing loops. When the RX queue loop breaks early because the number
of parsed queues reaches plat->rx_queues_to_use, q_node retains an
acquired reference count. If the error check passes
(queue == plat->rx_queues_to_use), execution proceeds directly to the
TX queue loop, where of_get_next_child() immediately overwrites q_node
with the first TX child, permanently leaking the retained RX child
device node reference.
Switch both loops to for_each_child_of_node_scoped() so child node
references are automatically dropped upon loop exit or early break,
and remove the now-unnecessary function-scoped q_node variable and
its manual of_node_put() at the exit label.
Signed-off-by: Md Rabbani <rabbanyhmm@gmail.com>
Link: https://patch.msgid.link/20260821055718.57-1-rabbanyhmm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rmnet_map_deaggregate() allocates each sub-frame with alloc_skb() and
leaves skb->dev NULL. __rmnet_map_ingress_handler() assigns
skb->dev = ep->egress_dev only on the data path, but a MAP command frame
is dispatched to rmnet_map_command() before that, so rmnet_map_send_ack()
runs netif_tx_lock(skb->dev) on a NULL device. An unprivileged user
reaches this by unsharing a user+net namespace, creating an rmnet link
over a tap device with INGRESS_DEAGGREGATION and INGRESS_MAP_COMMANDS,
and writing an aggregated frame carrying a flow-control command to the
tap fd.
Restore the assignment dropped by 378e25357ac7, so every skb leaving
rmnet_map_deaggregate() has a valid device.
BUG: KASAN: null-ptr-deref in _raw_spin_lock (kernel/locking/spinlock.c:158)
Write of size 4 at addr 00000000000004b4 by task exploit/144
Call Trace:
_raw_spin_lock (kernel/locking/spinlock.c:158)
netif_tx_lock (net/sched/sch_generic.c:497)
rmnet_map_command (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c:67)
rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:125)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6103)
...
__netif_receive_skb_one_core (net/core/dev.c:6214)
netif_receive_skb (net/core/dev.c:6474)
tun_get_user (drivers/net/tun.c:1966)
tun_chr_write_iter (drivers/net/tun.c:2012)
vfs_write (fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt
Fixes: 378e25357ac7 ("net: qualcomm: rmnet: Remove unnecessary device assignment")
Reported-by: co+4638111fe2a12980@bugs.sh
Closes: https://lore.kernel.org/netdev/ijg79FFMfIvKJbivdJEKvTO90Q9dTvyBkJck@bugs.sh/T/#u
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Subash Abhinov Kasiviswanathan <subash.a.kasiviswanathan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260820195240.1631458-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initialize the VF workqueue before register_netdev() so ndo_set_rx_mode
does not queue work on a NULL workqueue. Unregister the netdev before
destroying the workqueue, and add proper probe error cleanup.
Fixes: cbc100aa2205 ("octeontx2-nicvf: add ndo_set_rx_mode support for multicast & promisc")
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260820083634.1641740-1-nshettyj@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rvu_register_interrupts() walks every MSI-X vector and uses strstr()
to match "Mbox" or "FLR" in irq_name before pinning those interrupts
to CPU 0. irq_name is a per-vector NAME_SIZE buffer, but not every
slot is populated before this loop runs. strstr() keeps scanning until
it finds a NUL terminator, so an uninitialized slot can trigger a KASAN
slab-out-of-bounds read at boot when debug options are enabled.
Use strnstr() with NAME_SIZE to bound the search within each vector's
name buffer.
Fixes: 4e527f1e5c15 ("octeontx2-af: npc: cn20k: Add new mailboxes for CN20K silicon")
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260820055451.2642358-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rvu_dbg_nix_tm_tree_display() dereferences pfvf->sq_ctx without
checking whether the SQ context has been allocated. Reading
/sys/kernel/debug/octeontx2/nix/tm_tree for a NIX LF whose transmit
queues are not set up triggers a kernel oops.
Guard the read path the same way rvu_dbg_nix_tm_tree_write() already
does and return -EINVAL with a seq_file message when sq_ctx is NULL.
Fixes: b907194a5d5b ("octeontx2-af: Add debugfs support to dump NIX TM topology")
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260820050333.2606095-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gtp_newlink()'s error path frees tid_hash and addr_hash without
waiting for an RCU grace period after clearing sk_user_data. A
concurrent gtp_encap_recv() in softirq may still hold the gtp_dev
pointer obtained via rcu_dereference_sk_user_data() and access the
freed memory.
BUG: KASAN: slab-use-after-free in gtp0_pdp_find+0x1f6/0x200 (gtp.c:152)
Call Trace:
<IRQ>
gtp0_pdp_find+0x1f6/0x200
gtp_encap_recv+0x527/0x24b0
udp_queue_rcv_one_skb+0x75f/0xc10
Add synchronize_net() before the kfree calls in out_hashtable, which
covers all error paths from both gtp_encap_enable() and
gtp_create_sockets().
Fixes: 459aa660eb1d8ce6 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Reported-by: AutonomousCodeSecurity@microsoft.com
Reported-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reported-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Link: https://patch.msgid.link/20260820020735.59474-1-blbllhy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The zero-copy path reads TX metadata whenever the UMEM has metadata space,
even if the descriptor does not set XDP_TX_METADATA. Pass descriptor
options through the metadata helpers and ignore metadata unless the option
is set.
This does not fix the existing per-WQE metadata handling for mlx5 MPWQEs.
Only the descriptor that starts a session passes through
xsk_tx_metadata_request() and configures offload state shared by the batch.
Metadata on descriptors joining an open session is therefore not validated
and does not configure its requested offloads. In addition, a non-NULL
metadata pointer from such a descriptor is treated as a timestamp
completion request even when XDP_TXMD_FLAGS_TIMESTAMP is not set, so its
metadata union can be overwritten with an unrequested timestamp. Fixing
mixed metadata states within one MPWQE requires a separate change.
Fixes: 48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support")
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260819160535.1472459-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change WDMA RESV_BUFF from 0x40 to 0x80 to avoid CDM TX FIFO overflow.
Without this patch mt7986 and mt7981 may have WDMA TX hang issue. This
patch was pulled from mtk-openwrt-feeds GPL open source project.
Link: https://github.com/mediatek/mtk-openwrt-feeds/commit/07c87502e854b68b48544d101b6fe17ec059b97b
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/OSZPR01MB779537889255E2F606E47EABBCA52@OSZPR01MB7795.jpnprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the overall removal of Linux support for running on Hyper-V
hosts earlier than WS2016 and Windows 10, the special case handling of
GPADL teardown is no longer necessary. Remove it.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
On CoCo VMs without confidential VMBus, the netvsc send and receive buffers
must be made host-visible by decrypting them. These buffers are vmalloc'ed,
but set_memory_decrypted()/encrypted() do not work on vmalloc'ed memory.
This use case is (so far) unique to netvsc, so solve it locally rather than
changing the set_memory() or allocation APIs.
Use vmbus_alloc_buffer() to allocate the send and receive buffers, which
will make them host-visible. Store the list of memory chunks in the
netvsc_device struct so they can be individually freed later. Use
vmbus_establish_gpadl_caller_decrypted() so there is no attempt to decrypt
the virtual address.
Appropriately free the buffers with vmbus_free_buffer(). Because vunmap()
and set_memory_encrypted() must run in process context, replace the
rcu_head/call_rcu() pair used to defer free_netvsc_device() with
rcu_work/queue_rcu_work(). This also fixes a small race condition where the
buffers may be accessed while being re-encrypted by moving the
re-encryption after the RCU grace period.
Signed-off-by: Kameron Carr <kameroncarr@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Resource management:
- Add hotplug reservation only once (not at each level of the
hierarchy) so bridge windows don't grow more than necessary (Ilpo
Järvinen)
Driver binding:
- Rework device matching so device ID lifetime only needs to cover
the probe path since dynamic IDs can be removed at any time (Gary
Guo)
Error handling:
- Update mappings of AER errors to agent & layer and log them for
each individual error when multiple errors detected (Lukas Wunner)
- Log Error Source only once, not twice in separate messages (Lukas
Wunner)
- Emit TLP Log only for unmasked errors (Lukas Wunner)
- Support Advisory Non-Fatal Errors (Lukas Wunner)
- Allow DPC on all Downstream Ports, not just Root Ports, when OS
controls AER (Darshit Shah)
ASPM:
- Program the same ASPM Control values for every function of
multi-function devices, as recommended by the PCIe spec (Krishna
Chaitanya Chundru)
- Avoid L0s for Realtek RTS525A, where it causes an AER interrupt
storm (Max Lee)
- Avoid ASPM L0s, L1, and L1 PM Substates based on 'aspm-no-l0s',
'aspm-no-l1' [1], and 'aspm-no-l1ss' DT properties (Krishna
Chaitanya Chundru)
Power management:
- Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
(we avoid D3 for these ports on x86 because some old platforms
didn't validate it) (Manivannan Sadhasivam)
- Allow portdrv to claim Ports even if they don't support services
(AER, PME, DPC, hotplug, etc) so it can do power management (Brian
Norris)
Power control:
- Add support for PCIe WAKE# interrupt when described via DT (Krishna
Chaitanya Chundru)
- For the TC9563 PCIe switch:
- Take a reference on the I2C adapter to avoid uninterruptible
hang when unloading an I2C module while in-use (Johan Hovold)
- Update DT binding and driver to restrict Tx Amplitude, DFE and
N_FTS to USP, DSP1 and DSP2 (Manivannan Sadhasivam)
- Power off only external-facing ports (DSP1, DSP2), leaving USP
and DSP3 (aka VDSP) powered up (Manivannan Sadhasivam)
- Move integrated MAC Endpoint out of the list of internal ports
and configure it separately (Manivannan Sadhasivam)
Virtualization:
- Add ACS quirk for Pericom PI7C9X2G608 switches (Tim Harvey)
- Fix a long-standing bug in the Intel PCH Root Port MPC ACS quirk
that didn't update the intended INTEL_MPC_REG_IRBNCE bit because it
used a 16-bit config write when a 32-bit write was intended
(Mohamad Raizudeen)
Procfs:
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Warn on user-space writes to kernel-exclusive config space regions,
as we already do for sysfs (Krzysztof Wilczyński)
- Check credentials of opener, not reader, for config space reads, as
we already do for sysfs (Krzysztof Wilczyński)
Sysfs:
- In pci_write_legacy_io(), avoid out-of-bounds reads from the user
buffer and fix incorrect ioport write data (1-byte writes on
little-endian powerpc, 2- and 4-byte writes on big-endian powerpc)
(Krzysztof Wilczyński)
- In pci_read_legacy_io(), fix incorrect ioport read data for 2- and
4-byte reads on big-endian powerpc (Krzysztof Wilczyński)
- Fix I/O port accessor argument order in Alpha pci_legacy_write()
(Krzysztof Wilczyński)
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Return -EINVAL, not -ENODEV, for mmap of I/O BAR that fails because
the arch doesn't support it, as we do for procfs (Krzysztof
Wilczyński)
- Check for LOCKDOWN_PCI_ACCESS for legacy_io and legacy_mem, as we
do for other config space accessors (Krzysztof Wilczyński)
Peer-to-peer DMA:
- Add Nvidia Vera Rubin to list of platforms that support P2PDMA
(Leon Romanovsky)
Endpoint framework:
- Check doorbell SUCCESS bit in pci_endpoint_test to avoid treating
some failures as successes (Niklas Cassel)
- Fail doorbell test when the trigger IRQ is missed (Niklas Cassel)
New native PCIe controller drivers:
- Add DT binding and driver for NVIDIA Tegra264 (Thierry Reding)
Native PCIe controllers:
- Use common wait time definitions for PCIe link monitoring instead
of defining driver-private duplicates (Thierry Reding)
Generic host bridge driver:
- Fix NULL pointer dereference that caused enumeration failures on
32-bit CAM systems (Steffen Persvold)
Amlogic Meson PCIe controller driver:
- Correct the PERST# GPIO state so it remains asserted until power
and REFCLK become stable to fix enumeration failure (Ronald
Claveau)
ASPEED PCIe controller driver:
- Switch to irq_domain_create_linear() so we can obsolete
irq_domain_add_linear() (Jiri Slaby)
Cadence PCIe controller driver:
- Add MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)
- Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
controllers (Hans Zhang)
- Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)
- Fix host/endpoint dependencies for cadence-plat driver to fix link
error when cadence-plat is built-in but the host or endpoint driver
is modular (Aksh Garg)
Freescale i.MX6 PCIe controller driver:
- Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu)
- Remove PERST# checking from pci_host_common_parse_port() so callers
can decide whether to fall back to legacy DT binding with PERST# in
the host bridge (Sherry Sun)
- Fix build issues when PCI_PWRCTRL_GENERIC or PCI_HOST_COMMON is a
module (Arnd Bergmann)
- Create pwrctrl devices only once by doing it from imx_pcie_probe()
instead of imx_pcie_host_init(), which is used during both probe
and resume (Sherry Sun)
- Use 'dw_pcie_rp->skip_pwrctrl_off' to avoid powering off devices
during suspend to preserve wakeup capability (Sherry Sun)
- Add runtime PM support for i.MX95 to allow dynamic power management
when the link is idle (Richard Zhu)
Intel VMD host bridge driver:
- Support device ID 0x28C1 and assume that BIOS has already
enumerated the hierarchy below VMD and stored bus range info for OS
to use (Nirmal Patel)
- Add support for VMCONFIG BUS_RESTRICT_CFG=3, which makes it
possible to enumerate downstream devices on Intel Arrow Lake-HX
systems and probably others (Ali Alaei)
- Pay attention to _OSC negotiation for VMD hierarchy only when
running on bare metal, not when running in a VM (Nirmal Patel)
- Add Nova Lake (NVL) and Dunlow (DNL) Device IDs (Szymon Durawa)
MediaTek PCIe controller driver:
- Add support for PCIe controller in EcoNet EN7528 and EN751221 SoCs
(Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Add mediatek-gen3 'memory-region' for restricted DMA buffer
(Chen-Yu Tsai)
NVIDIA Tegra264 PCIe controller driver:
- Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
controllers so the unit address matches the first 'reg' entry
(Thierry Reding)
- Add Tegra264 Root Port stanzas to prepare for generic WAKE#
handling (Thierry Reding)
Qualcomm PCIe controller driver:
- Add IPQ9650 compatible with global interrupt (Kathiravan
Thirumoorthy)
- Add IPQ5210 compatible with IPQ9574 fallback (Varadarajan
Narayanan)
- Add DT binding and driver support for Hawi SoC (Matthew Leung)
- Skip PERST# GPIOs provided by downstream PCIe devices, which should
be handled by drivers of those devices (Manivannan Sadhasivam)
- Stop advertising Attention Button Present (no Qcom SoCs support
Attention Buttons) so pciehp can use Presence Detect Changed events
(Qiang Yu)
Renesas R-Car PCIe controller driver:
- Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek
Vasut)
- When MSI is enabled but iMSI-RX is not used, configure AXIINTC to
allow GIT ITS to handle MSI (Marek Vasut)
- Refactor GIC600 implementation to make it easier to add platforms
that only support 32-bit addressing (Marek Vasut)
- Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600
integrations that only support 32-bit addressing (Marek Vasut)
Renesas RZ/G3S PCIe controller driver:
- Add DT binding and driver support for RZ/V2H(P) SoC, which contains
two PCIe controllers, configured either as a single x4 link or two
independent x2 link controllers (Lad Prabhakar)
SpacemiT K1 PCIe controller driver:
- Add missing MODULE_DEVICE_TABLE() to generate module alias info for
OF-based module autoloading (Pengpeng Hou)
StarFive PCIe controller driver:
- Fix resource leaks on error paths in host_init() (Ali Tariq)
- Fix runtime PM handling and teardown ordering to avoid register
access while power or clocks are disabled (Ali Tariq)
- Check for runtime PM resume failure to avoid register access while
power or clocks are disabled (Ali Tariq)
Synopsys DesignWare PCIe controller driver:
- Add LECARC PMU IDs to the DWC RAS/DES VSEC list so it can take
advantage of the existing debugfs support for silicon debug, error
injection, and event counters (Brett Zhou)
- Factor pcie_valid_speed() and pci_bus_speed2lnkctl2() out of bwctrl
so they can be shared by the DWC core (Hans Zhang)
- Flush MSI writes from endpoint before unmapping the iATU, as we
already do for MSI-X writes (Niklas Cassel)
- Unmap MSI iATU window before mapping MSI-X window, to avoid a
subsequent MSI write using a disabled aperture and losing the
interrupt (Niklas Cassel)
- Change endpoint .pre_init() and .init() callbacks to return errors
and handle them (Marek Vasut)
UltraRISC PCIe controller driver:
- Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them
in the driver (Jia Wang)
- Use module_platform_driver() since this may be built as a module,
though not removable because IRQs can't be safely disposed (Jia
Wang)
MicroSemi Switchtec management driver:
- Add Microchip PCI1008 device ID and include it in NTB DMA alias
quirk (Logan Gunthorpe)
Miscellaneous:
- Document how to write PCI Host Controller drivers (Manivannan
Sadhasivam)
- Fix typos in documentation (D'Orus Tsitera)
- Use %pe format specifier to print error pointers so we get symbolic
errname when available (Krzysztof Wilczyński)"
* tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (124 commits)
PCI: vmd: Add Nova Lake (NVL) and Dunlow (DNL) Device IDs
PCI: tegra264: Add Tegra264 support
dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
PCI/AER: Support Advisory Non-Fatal Errors
PCI: Fix 32-bit config write in Intel PCH Root Port MPC ACS quirk
PCI: dwc: Handle return value from endpoint .pre_init callback
PCI: dwc: Handle return value from endpoint .init callback
PCI: dwc: Add PCI ID for LECARC PCIe PMU
PCI/ASPM: Mask ASPM states based on Devicetree properties
PCI/ASPM: Disable/restore ASPM on every function for multi-function devices
Documentation: PCI: Document how to write PCI Host Controller drivers
PCI/ASPM: Use pcie_capability_clear_and_set_word() for ASPM disable/restore
PCI: Add support for PCIe WAKE# interrupt
PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
dt-bindings: PCI: Correct white-space style
PCI/ASPM: Avoid L0s for Realtek RTS525A
PCI: ultrarisc: Use module_platform_driver()
PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
...
|
|
The driver memsets the RX buffer page head to zero before
submitting it to hardware, then calls dma_sync_single_for_device()
with DMA_TO_DEVICE. This sync direction does not match the pool
dma_dir which is DMA_FROM_DEVICE, violating the DMA API contract
that the sync direction must match the mapping direction.
On swiotlb platforms the mismatch can cause incorrect bounce-buffer
behaviour, and CONFIG_DMA_API_DEBUG emits a warning.
Switch the page_pool dma_dir to DMA_BIDIRECTIONAL so that the
CPU-to-device memset sync becomes legal.
Fixes: c30595917585 ("net: hibmcge: add support for pagepool on rx")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260820124346.4097115-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In wx_ptp_set_timestamp_mode(), the driver copies the global `wx->flags`
bitmap to a local variable, modifies the PTP-related bits, and then writes
the entire bitmap back using memcpy().
This Read-Copy-Update pattern is unsafe and introduces a critical race
condition. Other asynchronous contexts (such as Tx timeout routines or
GPIO IRQ handlers) update individual bits in `wx->flags` concurrently
using atomic bitops like set_bit() or clear_bit(). The memcpy() write-back
can silently overwrite and drop these concurrent changes, potentially
causing the driver to miss critical module reset or PCIe recovery requests.
Fix this by removing the local bitmap copy. Instead, evaluate the intended
PTP flag states locally and apply them directly to `wx->flags` using
atomic set_bit() and clear_bit() operations only after the hardware is
successfully configured.
Fixes: 06e75161b9d4 ("net: wangxun: Add support for PTP clock")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/6C7EC12D69217315+20260818074721.45536-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Under memory pressure, the qede driver encounters NULL pointer
dereferences when processing TPA continuation fragments.
Commit 8a8633978b84 ("qede: Add build_skb() support.") accidentally
dropped the assignment of tpa_info->buffer.data in qede_tpa_start().
When memory pressure causes an SKB allocation failure in qede_tpa_start(),
the driver sets tpa_start_fail = true and attempts to recycle the physical
page later in qede_tpa_end() via qede_reuse_page(). However, because
buffer.data was left uninitialized (NULL), qede_reuse_page() pushes a
"ghost" BD (valid DMA mapping but NULL data pointer) back into the
active Rx ring.
The next time the hardware uses this ring slot, it passes a NULL page
to qede_fill_frag_skb(), causing a kernel panic.
Example crash from production system:
BUG: unable to handle kernel NULL pointer dereference at 0x8
RIP: qede_fill_frag_skb+0x96/0x430 [qede]
Call Trace:
qede_rx_int+0xb06/0x1de0
qede_poll+0x2f4/0x6c0
__napi_poll+0x2d/0x130
Fix the root cause by restoring the tpa_info->buffer.data assignment
in qede_tpa_start(), ensuring valid pages are correctly tracked and
recycled. Additionally, update the stale comment for
struct qede_agg_info::buffer to reflect its current usage.
Fixes: 8a8633978b84 ("qede: Add build_skb() support.")
Cc: stable@vger.kernel.org
Signed-off-by: Vaibhav Nagare <vnagare@redhat.com>
Link: https://patch.msgid.link/20260818073309.2266072-1-vnagare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In txgbe_misc_irq_thread_fn(), the driver unmasks the miscellaneous
interrupt at the end of the handler using TXGBE_INTR_MISC(wx) (which
resolves to BIT(wx->num_q_vectors)). While this is correct for MSI-X
mode, it is incorrect for legacy INTx or single MSI modes.
Due to hardware behavior, the WX_PX_MISC_IVAR register is completely
ignored by the hardware when MSI-X is disabled. In non-MSI-X mode, the
hardware forcibly merges all interrupt causes (both Queue and MISC) into
a single bit: BIT(0) of the interrupt register.
Unconditionally unmasking TXGBE_INTR_MISC(wx) (e.g., BIT(1)) in non-MSI-X
mode means the actual MISC interrupt bit (BIT(0)) is not unmasked
promptly at the end of the MISC thread. Instead, it remains masked until
NAPI completes its polling and unmasks the shared BIT(0). This delays the
assertion of subsequent MISC interrupts, preventing timely handling of
events like link state changes.
Fix this by explicitly checking `pdev->msix_enabled` and falling back
to BIT(0) as the interrupt mask for the MISC cause when MSI-X is disabled.
Additionally, unconditionally unmasking the interrupt at the end of the
thread introduces a race condition during device teardown. Guarding the
wx_intr_enable() call with a check for the WX_STATE_DOWN bit, to prevent
re-arming the interrupt during device shutdown.
Fixes: e37546ad1f9b ("net: wangxun: revert the adjustment of the IRQ vector sequence")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/56A53978B83EEDE9+20260818023026.6631-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sparx5_set_rx_mode() runs with netif_addr_lock_bh held and iterates
dev->mc via __dev_mc_sync(), which per address calls sparx5_mc_sync() /
sparx5_mc_unsync() -> sparx5_mact_learn() / sparx5_mact_forget(). These
take sparx5->lock, a mutex, and then poll the MAC access command
register with readx_poll_timeout(). A mutex may block, which is not
allowed from atomic context.
Convert the driver to the new .ndo_set_rx_mode_async callback introduced
in commit 3554b4345d85 ("net: introduce ndo_set_rx_mode_async and
netdev_rx_mode_work"). The async callback is invoked from process
context, so the mutex and sleeping completion poll can remain.
Observed with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_SPINLOCK,
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_ATOMIC_SLEEP enabled:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 217, name: ip
preempt_count: 201, expected: 0
Call trace:
__might_resched+0x144/0x248
__might_sleep+0x48/0x7c
__mutex_lock+0x74/0x850
mutex_lock_nested+0x24/0x30
sparx5_mact_learn+0x78/0x100
sparx5_mc_sync+0x40/0x54
__hw_addr_sync_dev+0xc4/0x170
sparx5_set_rx_mode+0x4c/0x58
__dev_set_rx_mode+0x64/0xa4
__dev_open+0x1ec/0x26c
Fixes: d6fce5141929 ("net: sparx5: add switching support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260817-misc-fixes-sparx5-lan969x-v3-2-c7c7fef723a8@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sparx5_vcap_init() runs before sparx5_register_netdevs() in probe, and
its debugfs setup calls vcap_port_debugfs() for every port using
netdev_name(ndev) as the debugfs file name. At that point the netdevs
have only been allocated, not registered, so dev->name still holds the
"eth%d" template and netdev_name() returns "(unnamed net_device)".
Every port tries to create the same file under vcaps/, producing a
flood of warnings at boot:
debugfs: '(unnamed net_device)' already exists in 'vcaps'
debugfs: '(unnamed net_device)' already exists in 'vcaps'
...
Add vcap_port_debugfs_portno(), a variant of vcap_port_debugfs() that
takes the port's stable hardware port number and uses "p%u" as the
debugfs file name instead of netdev_name(ndev). This makes the file
name independent of registration order; the file still stores and
later dereferences the netdev itself, same as before. sparx5 already
reports the same "p%d" string via ndo_get_phys_port_name(), so the
debugfs name now matches that.
Only sparx5 (and lan969x, which shares this code) is switched to the
new function. lan966x keeps calling vcap_port_debugfs() unchanged, so
this fix does not rename any of its existing debugfs files.
Fixes: b8909aad5b8d ("net: sparx5: move netdev and notifier block registration to probe")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260817-misc-fixes-sparx5-lan969x-v3-1-c7c7fef723a8@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PDP contexts can be deleted through GTP_CMD_DELPDP or while the GTP
network device is being unregistered. The latter is serialized by RTNL,
but the generic-netlink delete path only holds RCU.
Running both paths concurrently can therefore make both paths delete the
same PDP context. The issue was found through static analysis and
reproduced on a KASAN-enabled kernel by a simple two-thread program
racing GTP_CMD_DELPDP against RTM_DELLINK:
Oops: general protection fault, probably for non-canonical address
KASAN: maybe wild-memory-access in range
[0xdead000000000120-0xdead000000000127]
RIP: gtp_genl_del_pdp+0x1c1/0x420 [gtp]
RBP: dead000000000122
The second deletion dereferenced the poisoned hlist pprev pointer.
Serialize gtp_pdp_add(), gtp_genl_del_pdp(), and gtp_dellink() with a
shared mutex. Keep the mutex held until the final use of a PDP context in
the NEWPDP path, and keep the RCU read-side section around the complete
PDP context use in the DELPDP path.
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Cc: stable@vger.kernel.org
Signed-off-by: Qing Ming <a0yami@mailbox.org>
Link: https://patch.msgid.link/20260818150000.7670-1-a0yami@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When replacement skb allocation fails, ntb_netdev drops a packet that
was received successfully and requeues the original buffer. The drop is
counted, but rx_packets and rx_bytes are not.
Count every good packet before allocating its replacement.
Fixes: d2121faf133a ("NTB: ntb_netdev: Preserve RX queue depth on allocation failure")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Link: https://patch.msgid.link/20260819172539.1450821-3-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netif_rx() already accounts packets it drops in the core rx_dropped
counter. ntb_netdev counts them again as both errors and drops.
Leave netif_rx() drops to the core. Count the packet and bytes
unconditionally since it was received successfully by the driver.
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Cc: stable@vger.kernel.org
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Link: https://patch.msgid.link/20260819172539.1450821-2-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In bnxt_request_irq(), pcie_enable_tph() is called unconditionally to
enable PCIe TPH when setting up interrupts.
If the NIC hardware or firmware capabilities do not support queue ops,
attempting to enable TPH during bnxt_request_irq() is unnecessary.
As a result a flood of "RX queue restart failed: err=-95" messages is
seen upon boot.
Older NICs (pre-Thor / BCM57414) do not support TPH or queue management.
TPH requires queue management to restart the queue. NICs that support
queue management (with updated FW) all support TPH.
Gate the call to pcie_enable_tph() and setting of bp->tph_mode
behind BNXT_SUPPORTS_QUEUE_API(bp) to ensure TPH is only initialized
on devices capable of supporting queue ops. This prevents a guaranteed
-EOPNOTSUPP error from occurring due to NULL operations.
Fixes: c214410c47d6 ("bnxt_en: Add TPH support in BNXT driver")
Suggested-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Thomas Walsh <thwalsh@redhat.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260820220544.1240879-1-thwalsh@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The first parameter of hwmon_notify_event() is supposed to be the hardware
monitoring device. The bnxt driver calls it with the platform device as
first parameter instead. This API break results in undefined behavior and
may result in a crash.
Pass the hardware monitoring device as parameter instead to fix the
problem.
Fixes: a19b4801457b0 ("bnxt_en: Event handler for Thermal event")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260821044512.663941-1-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull RDMA updates from Jason Gunthorpe:
"About the normal size, still a lot of AI bug fixes and so on, but some
interesting new functionality too:
- Assorted locking, bounds-checking, cleanup, and error-path fixes
across UCMA/CMA, bng_re, bnxt_re, cxgb4, EFA, ERDMA, HFI1, HNS,
ionic, iRDMA, mlx4/mlx5, RXE, SIW, SRP/SRPT, and iSER target.
- netlink report for max # of supported resources
- get_zeroed_page()/etc removal
- Robust udata for ionic
- Allow unique RDMA device names per network namespace
- Completion counters and v2 admit queue support for EFA
- UC QP support for MANA
- Completion timestamps for ionic
- Harden uverbs data validation and resource lifetime handling,
fixing several core use-after-free conditions.
- bnxt_re toggle-page ownership and lifetime bug fixes
- dmabuf SRQ support for mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (160 commits)
RDMA/ucma: Allow path records to exactly fit the output buffer
RDMA/uverbs: Guard legacy bundles without method_elm
RDMA/efa: Add support for 128B admin v2 SQ entry
RDMA/efa: Generalize the admin SQ
RDMA/efa: Decouple admin command payload from admin header
RDMA/rxe: Fix OOB in free_rd_atomic_resources()
RDMA/cma: Fix WARNING in res_to_rt
RDMA/cxgb4: Free debugfs on registration failure
RDMA/cxgb4: Cancel reg_work before freeing device on remove
RDMA/ucma: Lock the handler in ucma_set_ib_path()
RDMA/ucma: Lock the handler in ucma_write_cm_event()
RDMA/erdma: restrict the driver to little-endian systems
RDMA/ionic: Embed counter driver data in rdma_counter allocation
RDMA/ionic: Cap eq_count to the eth driver's interrupt vector budget
RDMA/siw: Fix use-after-free in siw_accept()
IB/isert: post the full-feature receive buffers after session registration
IB/isert: delay the final Login Response until the session is registered
RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ
RDMA/erdma: Hold QP references for AE and CM processing
RDMA/erdma: Hold CQ references when processing EQ events
...
|
|
When a burst of packets is handed down to the driver, the driver defers
the doorbell to the end by setting txr->kick_pending = 1. The normal TX
path handles this, but the SW USO path can miss it if it returns
early.
If bnxt_sw_udp_gso_xmit runs but returns early with NETDEV_TX_BUSY and
txr->kick_pending was previously set to 1, then the TX queue can
stall because the driver wrote some BDs but never wrote the doorbell.
The device won't know to do the TX which would generate the completion
that would wake the queue back up.
Simplify bnxt_sw_udp_gso_xmit to set txr->kick_pending in its success
case and check the flag on return. The added check after
bnxt_sw_udp_gso_xmit returns ensures that any pending doorbells are
written handling both successful USO and any early returns, which
prevents the TX queue stall mentioned above.
This TX queue stall was observed on a production system with a netdev TX
watchdog informing about the queue stall.
Fixes: cc5d90667db8 ("net: bnxt: Implement software USO")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Damato <joe@dama.to>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260819233213.3673149-1-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm: drop "sub" prefix from various places" (Dev Jain)
page->folio conversion and a naming cleanup
- "mm/kasan: remove redundant initialization for kasan_flag_write_only"
(Igor Putko)
KASAN cleanup work
- "mm/filemap: reduce unnecessary xarray lookups" (Chi Zhiling)
Small speedup in the pagecaache read code
- "mm/percpu: Fix possible NOFS/NOIO reclaim recursion" (Kaitao Cheng)
Improve the vmalloc code - mainly the avoidance of GFP_KERNEL
allocations when the caller asked for GFP_NOFS or GFP_NOIO
- "mm/kmemleak: avoid soft lockup when scanning task stacks" (Breno
Leitao)
Avoid a soft lockup watchdog trigger from the kmemleak scanning code
in extreme situations
- "mm/page_owner: misc cleanups" (Ye Liu)
Cleanups to the page_owner code. For some reason lots of people have
been working on the page_owner code this cycle.
- "mm: convert to walk_page_range_vma() to eliminate find_vma()"
(Kefeng Wang)
Simplify and accelerate the page walking library function
- "mm/migrate: preparatory cleanups for batch copy and offload"
(Shivank Garg)
Cleanups in the migration code
- "mm/page_owner: add per-fd filter infrastructure for print_mode and
NUMA filtering" (Zhen Ni)
Per-fd filtering to page_owner in order to reduce the sometimes vast
amount of output it can produce
- "mm: Refactor bootmem gigantic hugepage allocation" (Muchun Song)
Fixes and preparatory cleanups around bootmem HugeTLB handling,
sparse initialization ordering, and related vmemmap setup
- "mm/zsmalloc: reduce lock contention in zs_free()" (Wenchao Hao)
Reduce lock contention in zs_free(), which dominates the unmap path
under memory pressure on Android (LMK kills) and on x86 servers
running zswap-heavy workloads.
Up to 1.83x improvement in microbenchmarking.
- "move alloc_tag.c file under mm/" (Suren Baghdasaryan)
- "samples/damon: handle damon_{start,stop}() failures" (SJ Park)
Fix improper handling of damon_start(), damon_stop(), and
damon_call() failures across DAMON sample modules to prevent
potential memory leaks, operation disruptions and use-after-free
bugs
- "mm/damon/sysfs: kobject_del() directories that users can
create/remove" (SJ Park)
Fix delayed sysfs directory removal under DEBUG_KOBJECT_RELEASE
causeing creation failures due to duplicate directory names by adding
missing kobject_del() calls before creating new directories
- "mm: cleanup clear_not_present_full_ptes()" (David Hildenbrand)
Clean up the core pte handling code
- "selftests/damon: misc fixes for test bugs" (Kunwu Chan)
Fix several bugs in the DAMON selftests
- "selftests/damon: fix memcg_path staging handling" (Cheng Nie)
Fix a bug in _damon_sysfs.py for damos_filter memcg_path setup, and
add a test case for it in sysfs.py.
- "selftests/damon: test kdamond refresh_ms" (Ruslan Valiyev)
Selftest coverage for DAMON's refresh_ms sysfs feature by updating
the test control module and verifying that scheme stats update
automatically without manual intervention
- "mm/damon: five misc fixups" (Akinobu Mita)
Miscellaneous DAMON fixups.
- "mm/damon/core: detect internal variation above max_nr_regions/2"
(Jiayuan Chen)
Fix DAMON's region splitting behavior when region counts exceed half
the maximum budget by dynamically scaling down the split fraction as
the limit approaches, preventing large regions from staying un-split,
and add corresponding KUnit test coverage
- "mm: preparatory patches for PMD level swap entries" (Usama Arif)
Refactor and clean up PMD softleaf helpers, call sites, and
architecture flags to lay the groundwork for a follow-up series that
introduces PMD page table swap entries
- "mm/damon: update, optimize, and clean up doc, tests, and code" (SJ
Park)
Update DAMON design and ABI documentation, expands unit and selftest
coverage, optimize damon_commit_target_regions(), and clean up
recently added sysfs interface code for better readability
- "mm/vmpressure: reduce CPU, memory and code overhead on cgroup v2"
(Usama Arif)
Optimize vmpressure() by skipping unnecessary work on cgroup v2 for
userspace event notifications and refactor v1-only eventfd handling
into mm/memcontrol-v1.c to reduce memory overhead and code complexity
- "selftests/mm: refactor pkey helpers and fix mmap error handling"
(Hongfu Li)
Refactor pkeys shared tracing and assertion helpers into a common
file, unify protection key selftests to use consistent diagnostic
logging and assertions, and enforce standardized MAP_FAILED return
checks for mmap() calls across the tests
- "mm/damon: optimize out nr_accesses_bp" (SJ Park)
Replace the error-prone, continuously updated nr_accesses_bp field in
damon_region with an on-demand moving sum function, reducing
structure memory overhead and avoiding state corruption bugs
- "Open HugeTLB allocation routine for more generic use" (Ackerley Tng)
Decouple HugeTLB folio allocation from VMA dependencies by
introducing hugetlb_alloc_folio(), enabling subsystems like
guest_memfd to allocate HugeTLB folios without standard VMA
reservations or pseudo-VMAs
- "mm/damon: provide pseudo moving sum probe_hits" (SJ Park)
Integrate DAMON's probe_hits attribute counter into the pseudo moving
sum infrastructure, enabling real-time, online monitoring without
waiting for full aggregation intervals
- "mm: Some cleanups for page allocator APIs" (Brendan Jackman)
Simplify and refactor the page allocator entry points and flags by
unifying allocation paths, adding internal alloc_flags arguments, and
eliminating redundant __ prefixed alloc_pages variants.
- "Fix incorrect access of hugetlb pte entries" (Dev Jain)
Enforce the consistent use of huge_ptep_get() instead of ptep_get()
for HugeTLB entries and fixes an unaligned address issue in arm64's
huge_ptep_get() implementation
- "mm/damon: validate all parameters in the core" (SJ Park)
Consolidate parameter validation into the DAMON core specifically
within damon_start() and damon_commit_ctx() to centralize error
checking, eliminate caller-side redundant checks and to improve
maintenance efficiency
- "tools/mm/page_owner_sort: fix filtering and cleanup issues" (Yichong
Chen)
Rename is_need() to filter_record() for clearer return semantics, fix
per-record allocation memory leaks and bound output copies in
search_pattern() to address an existing buffer issue
- "memcg: bail out reclaim when memcg is dying" (Jiayuan Chen)
Mitigate a system-wide stall which occurs when a cgroup is removed
while one of its memory control files is doing synchronous reclaim
- "mm/memory-failure: add panic option for unrecoverable pages" (Breno
Leitao)
Introduce an opt-in vm.panic_on_unrecoverable_memory_failure sysctl
that immediately panics the kernel on unrecoverable memory errors in
kernel-owned pages to preserve error context and prevent delayed,
silent data corruption
- "mm/damon: refactor damon_{start,stop,commit}() for simple error
handling" (SJ Park)
Refactor the DAMON core API functions to guarantee that all contexts
are fully stopped when damon_start(), damon_stop(), or damon_commit()
fail, eliminating the need for complex and error-prone caller-side
cleanup code
- "Keep tail page private zero at free and folio split" (Zi Yan)
Add checks to ensure tail_page->private is zero when freeing compound
or high-order pages and when promoting tail pages during large folio
splits. By validating these fields at free and split time, it allows
the removal of redundant private field clearing inside
prep_compound_tail()
- "mm: drop redundant lru_add_drain in anon folio reuse paths" (Barry
Song)
Eliminate redundant lru_add_drain() calls in
wp_can_reuse_anon_folio() and do_swap_page() to reduce LRU lock
contention and system overhead
By validating folio refcounts against the LRU cache before draining
and removing unnecessary drains in the swap path, it achieves up to a
30.5% reduction in drain calls during heavy swap workloads
- "mm: clean up folio LRU and swap declarations" (Jianyue Wu)
Reorganize folio LRU and swap code by relocating page-cluster state
to mm/swap_state.c, renaming mm/swap.c to mm/folio.c, and moving
MM-internal reclaim declarations into mm/internal.h.
- "userfaultfd: working set tracking for VM guest memory" (Kiryl
Shutsemau)
Add userfaultfd support for tracking the working set of VM guest
memory, so a VMM can identify hot pages and reclaim cold ones to
tiered or remote storage
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 2)" (David
Hildenbrand)
Remove the remaining pieces of CONFIG_HAVE_BOOTMEM_INFO_NODE,
performing some smaller cleanups around freeing of reserved vmemmap
pages on the way.
- "mm/damon: update probe hits for runtime parameter commits" (SJ Park)
Ensure that DAMON's probe_hits attribute counter is properly updated
when monitoring intervals are changed at runtime, matching the
behavior of nr_accesses. To achieve this, it refactors and renames
existing helper functions for shared use, applies the updates to
probe_hits, and handles edge cases in damon_probe_hits_mvsum() to
maintain measurement accuracy.
- "KSM: performance optimizations for rmap_walk_ksm" (xu xin)
Resolve a severe KSM reverse-mapping performance bottleneck where
thousands of split VMAs sharing a single anon_vma cause extended lock
contention.
By adding an interval-filtering check during the rmap walk, it
reduces worst-case anon_vma lock hold times from over 500ms down to
under 2ms, preventing application freezes and latency spikes under
memory pressure.
- "mm: split a couple of headers from internal.h" (Mike Rapoport)
Split declarations related to mm_init, memblock, vmalloc and sparse
into new headers
- "KSM: use linear_page_index in collect_procs_ksm()" (xu xin)
Apply the interval tree optimization from rmap_walk_ksm() to
collect_procs_ksm() to avoid iterating over non-matching VMAs during
KSM memory error handling.
It hoists loop-invariant address initialization and restricts the
anon_vma_interval_tree_foreach walk to a targeted page offset range,
reducing redundant checks and improving lookup efficiency.
- "selftests/mm: avoid false failures in hugetlb and KSM tests" (Sayali
Patil)
Fix issues in the hugetlb and KSM MM selftest categories that can
report failures when the prerequisites for the tests are not
satisfied
- "mm/damon: introduce data attributes only monitoring" (SJ Park)
Introduce attribute-weighted region management in DAMON, allowing
users to prioritize specific data attributes (such as page sizes or
cgroups) over or instead of access monitoring.
By assigning weights to attribute probes, DAMON can completely
disable access tracking and adjust monitoring regions based on
weighted probe-hit counters to optimize monitoring quality for
attribute-focused workloads.
- "mm/hmm: Add mmap lock-drop support for userfaultfd-backed mappings"
(Stanislav Kinsburskii)
Extend hmm_range_fault() to support userfaultfd-backed regions by
allowing the mmap lock to be dropped during fault handling via a new
hmm_range_fault_locked() helper.
By accepting a locked pointer and signaling retry status when lock
release occurs, it enables page fault resolution in userfaultfd
regions while preserving backward compatibility for existing callers.
- "mm: make VMA page offset handling more consistent" (Lorenzo Stoakes)
Clean up and standardize how vma->vm_pgoff is accessed and
manipulated across file-backed and anonymous mappings in the kernel
It introduces dedicated helper functions such as vma_start_pgoff(),
vma_end_pgoff(), vma_set_pgoff() and linear_page_delta() while
renaming rmap interval tree helpers to better reflect their
functionality.
These changes establish a cleaner foundation for future work that
will unify virtual page offset indexing for all anonymous and CoW'd
folios.
- "mm: handle device-private PMDs in walk callbacks" (Usama Arif)
Address kernel panics and state corruption caused by MM walk
callbacks reaching non-present device-private PMD swap entries
created during HMM migrations
It ensures that functions which acquire pmd_trans_huge_lock()
properly recognize device-private PMDs instead of assuming a present
THP or a standard migration entry.
- "mm/rmap: Refactor try_to_unmap_one" (Dev Jain)
Refactor try_to_unmap_one by modularizing Hugetlb,
anonymous-lazyfree, and anonymous-swapbacked logic into dedicated
functions, laying the structural groundwork for batched anonymous
large folio unmapping.
- "Docs/ABI/damon: sysfs ABI document fixes and additions" (Song Hu)
Fix typos and fills in missing entries in the DAMON sysfs ABI
document
- "dax/kmem: atomic whole-device hotplug via sysfs" (Gregory Price)
Introduce an atomic sysfs state attribute and supporting DAX/MM
infrastructure to prevent userland races when offlining and removing
entire memory regions
By adding an unplugged state alongside standard online modes, it
enables whole-device atomic hotplug control while preserving backward
compatibility.
- "mm: convert more vm_flags_t users to vma_flags_t" (Lorenzo Stoakes)
Continue transitioning the kernel from the deprecated vm_flags_t type
to vma_flags_t across core memory management infrastructure.
It replaces legacy type usage in core functions such as do_mmap(),
unmapped area allocation, mm->def_vma_flags, and VMA operations like
mlock, mprotect, and mremap.
- "Two small patches to clean up mm/mm_slot.h" (xu xin)
Refactor mm_slot.h by introducing mm_slot_remove() to unify duplicate
slot deletion sequences in khugepaged and KSM. It also adds code
documentation explaining why mm_slot_lookup and mm_slot_insert must
remain as preprocessor macros rather than static inline functions.
- "mm/damon/core: hide core-private struct fields" (SJ Park)
Clean up DAMON core structures by consistently marking internal-only
fields with private: comment tags to prevent improper direct access
from outer layers.
It enforces encapsulation across core structures including
damon_region, damon_target, and damon_ctx and updates DAMON_SYSFS to
interact through approved access APIs instead of exposing raw struct
members.
- "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races"
(SJ Park)
Address potential infinite loops, NULL dereferences, and race
conditions identified in DAMON
It fixes an infinite loop triggered by extreme user configurations, a
NULL pointer dereference within unit tests and minor monitoring
accuracy degradation caused by subtle runtime races.
- "mm/page_alloc: fixes for free_pages_nolock() on RT/UP" (Brendan
Jackman)
Fix an NMI safety flaw in __free_frozen_pages() where freeing pages
on non-SMP or PREEMPT_RT kernels can bypass can_spin_trylock() checks
via non-PCP or isolated migration paths.
It also resolves potential kernel crashes and privilege escalation
risks triggered when BPF tracing runs in NMI context alongside memory
hotplug or large allocation frees.
- "mm/page_alloc: couple of followups for recent cleanups" (Brendan
Jackman)
Clean up and update page allocator nomenclature, documentation, and
debug assertions.
It aligns internal FPI_ flags with the public "nolock" naming
convention, removes outdated internal implementation details from
high-level page allocator comments, and eliminates obsolete
VM_BUG_ON() assertions in allocation paths.
- "mm/mseal: further cleanups" (Lorenzo Stoakes)
Refactor and simplify the mseal implementation by clarifying API
boundaries and removing unnecessary code complexity.
It replaces generic do_mseal() usage outside the syscall with a
dedicated mseal_mmap_page_zero() helper for MMAP_PAGE_ZERO,
eliminates mm_struct parameters to enforce that sealing applies only
to current->mm, and streamlines overall logic and comments with no
functional changes intended.
- "mm/vmscan: fix swappiness=max and clean up per-node proactive
reclaim" (Ridong Chen)
Resolve reclaim behavior bugs and clean up function parameters across
memory reclaim paths
It fixes swappiness=max in both standard reclaim and MGLRU so
unswappable anonymous memory no longer falls back to evicting page
cache, ensures reclaim_store() returns accurate error codes instead
of collapsing all failures into -EAGAIN, and removes the obsolete
gfp_mask parameter from __node_reclaim().
- "mm: mincore: misc cleanups" (Kefeng Wang)
Clean up and simplifies the mincore code. Most importantly, it
removes the historical special behavior that always reports VM_PFNMAP
pages as non-resident.
- "mm/huge_memory: drop dead split helper variants" (Kiryl Shutsemau)
Two trivial cleanups in the folio split API
- "mm/damon: fix uninitialized DAMOS field and kunit exec expectation
bugs" (SJ Park)
Resolve minor operational and testing bugs in DAMON identified by
Sashiko. It initializes the damos->last_applied field to prevent
occasional efficiency degradation and fixes invalid memory accesses
in DAMON KUnit tests during test failure handling.
- "cleanup for stable_page_flags()" (Jinjiang Tu)
Clean up and refactor stable_page_flags() used by /proc/kpageflags
without altering functionality.
It uses BIT_ULL() to prevent shift-overflow warnings on 64-bit flag
bits, converts folio-specific flag checks to standard folio_test_*()
helpers, and removes redundant CONFIG_PAGE_IDLE_FLAG handling.
- "Batch unmap of uffd-wp file folios" (Dev Jain)
Extend batched folio unmapping support to file folios within
userfaultfd write-protect (uffd-wp) VMAs by adding batching
capabilities to pte_install_uffd_wp_if_needed().
This removes special-case restrictions on uffd-wp VMAs in
try_to_unmap_one(), significantly simplifying the function's control
flow and complexity.
- "mm/early_ioremap: clarify and clean up early_ioremap_reset()"
(Sang-Heon Jeon)
Clarify and clean up the architecture-specific usage of
__late_set_fixmap() and __late_clear_fixmap() after
early_ioremap_reset()
It adds explicit documentation regarding when early_ioremap_reset()
must be called and removes redundant macro definitions and reset
calls in the RISC-V and ARM64 architectures.
- "mm: fix reclaim storms in defrag_mode" (Johannes Weiner)
Address severe performance regressions, swap storms, and spurious
OOMs caused by vm.defrag_mode=1 under high memory pressure in Meta
production
It updates the page allocator slowpath so non-movable allocation
requests actively trigger direct reclaim and direct compaction at
pageblock_order scale, allowing them to claim whole pageblocks rather
than spinning unproductively.
- "zram: lockmap tweaks" (Sebastian Siewior)
Optimize and fix lockdep tracking for zram devices by consolidating
per-entry lockmaps and isolate lock classes across multiple instances
This reduces memory overhead by replacing per-entry lockdep_map
instances with a single map per struct zram, and assigns a dynamic
lock_class_key to each instance to prevent false deadlock reports
when different zram devices are backed by distinct filesystems.
* tag 'mm-stable-2026-08-18-18-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (501 commits)
selftests/mm: thuge-gen: fix test_shmget() for PAGE_SIZE check
selftests/mm: unpoison pages in memory-failure teardown
mm/shmem: downgrade final i_blocks check in shmem_evict_inode() to pr_warn()
mm/khugepaged: replace mutex_lock/mutex_unlock usage with guard macro
mm/zsmalloc: fix release order of locks in zs_page_migrate()
Documentation: zram: remove sections numbering
ksm: stop iterating VMAs when ksm_test_exit returns true
mm: fold userfaultfd_rwp() to false without CONFIG_ARCH_HAS_PTE_PROTNONE
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
zram: use a custom key for each zram object
zram: move lockmap to be per-zram instead per table
selftests/mm: fix gup_longterm EINVAL error message
mm: page_alloc: fix non-movable reclaim storm in defrag_mode
mm: page_alloc: move capture_control to the page allocator
mm: compaction: support non-movable compaction for pageblock requests
mm: page_alloc: __GFP_FS lockdep annotation for direct compaction
hugetlb: evaluate subpool free state while locked
mm/damon: remove trailing semicolons after function definitions
mm/damon/ops-common: prevent migration fallback to non-target nodes
mm/damon: update outdated comment about DAMOS filter handling
...
|
|
The cdc_devs[] quirk table special-cases the Mac CDC-NCM private
interface personality only for USB product ID 0x1905.
Some MacBook Pro models (e.g. M1 Max) connected over a
USB4/Thunderbolt 3/4 cable to a host whose Thunderbolt controller
lacks PCIe tunneling support (no NHI function, USB4-only mode)
present themselves with product ID 0x1902 instead,
using the same descriptor layout as 0x1905: a Communications
control interface with zero endpoints (no interrupt/status endpoint)
paired with a CDC Data interface, at
interface numbers 0 and 2.
Because 0x1902 is unmatched, these devices fall through to the
generic cdc_ncm_info driver_info, which sets FLAG_LINK_INTR and
therefore requires an interrupt endpoint on the control interface.
Apple's private NCM interface never provides one, so cdc_ncm_bind()
fails outright:
cdc_ncm 2-1:1.0: bind() failure
cdc_ncm 2-1:1.2: bind() failure
and no network device is created, breaking Ethernet-over-USB4
between the Mac and any USB4 host lacking Thunderbolt PCIe
tunneling.
Add matching entries for 0x1902 alongside the existing 0x1905
ones, reusing apple_private_interface_info as with the other Mac
ID.
Signed-off-by: Mehrdad Afshari <mehrdad@signeen.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently arp/neigh_reduce read neigh ha directly which can lead to
partial reads while the neigh is being updated. Use neigh_ha_snapshot to
take a stable snapshot of the address similar to route_shortcircuit which
already does the right thing.
Fixes: e4f67addf158 ("add DOVE extensions for VXLAN")
Fixes: f564f45c4518 ("vxlan: add ipv6 proxy support")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260818150756.890025-3-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In phylink_inband_caps(), the PCS returned by mac_select_pcs is only
checked if NULL but mac_select_pcs can also return an error pointer.
This can cause a kernel panic as phylink_pcs_inband_caps() only checks
if passed PCS is not NULL and directly dereference ops from the phylink_pcs
struct.
Use the IS_ERR_OR_NULL macro to address both case where the returned
PCS can be NULL or an error pointer and prevent a kernel panic.
Cc: stable@vger.kernel.org
Fixes: df874f9e52c3 ("net: phylink: add pcs_inband_caps() method")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20260817213009.13924-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, ntb_netdev returns NETDEV_TX_BUSY for every enqueue error. It
also increments the drop and error counters while leaving the skb owned
by the qdisc, and may return BUSY with the subqueue still awake.
Retrying a permanent error cannot succeed either.
The unconditional BUSY return and premature accounting date back to the
initial driver. The error-path queue stop was later removed without
changing that return value. The current flow-control code includes a
resource check, but ntb_netdev does not honor its result before enqueue.
Honor the resource check before enqueue. For -EAGAIN and -EBUSY, stop
the subqueue, arm the existing reaper timer, and return BUSY without
touching the skb. For other errors, free the skb, increment tx_dropped,
and return NETDEV_TX_OK.
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Fixes: d723485cb4ca ("ntb_netdev: remove tx timeout")
Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260817053519.4135287-3-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Abhijit Gangurde says:
====================
Extend the net/ionic firmware identity structure to expose
the rcq_sign_bit field from the RDMA LIF identity.
* 'ionic_rcq_shared' of https://github.com/abhijitG-xlnx/linux:
net: ionic: Fetch RCQ sign bit from firmware
====================
Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The unified ROM parser reads directory, product, and data-descriptor fields
from the firmware file. Existing validation forms table and data ends with
unchecked additions and multiplications. Malformed values can wrap before
they are compared with the firmware size. The parser also dereferences
typed pointers at firmware-controlled offsets.
Valid descriptor extents alone are insufficient for the consumers. The
loader reads a fixed-size bootloader regardless of its declared size, the
version parser assumes a 17-byte tail, and a partial final firmware word is
read as a full u64. A truncated image can therefore make the driver read
beyond the firmware allocation during validation or loading.
Replace the pointer-returning parser with bounded range helpers. Validate
table entry sizes, descriptor indices, section ranges, the fixed
bootloader load length, and the version tail before exposing any section.
Read all file fields with unaligned little-endian accessors and assemble a
partial final word from only the bytes that remain. Apply the same range
checks to the legacy image before reading its fixed fields.
Fixes: af19b49152bd ("qlcnic: Qlogic ethernet driver for CNA devices")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816052109.4607-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bnx2x_init_firmware() frees bp->init_ops, bp->init_data and
bp->init_ops_offsets in its error path without setting them to NULL.
The cleanup function bnx2x_release_firmware() frees the same three
pointers unconditionally, so if init_firmware fails and
release_firmware is later called (e.g. from __bnx2x_remove or through
the function state machine), all three are freed a second time.
Set each pointer to NULL after kfree() in the error path so that the
subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op.
Fixes: 94a78b79cb5f ("bnx2x: Separated FW from the source.")
Cc: stable@vger.kernel.org
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260815122149.951215-1-yijiangshan@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In netdevsim, receive queues (struct nsim_rq) embed their own struct
napi_struct. When queue reset is performed (e.g. via queue_reset
debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq,
and nsim_queue_mem_free() later deletes and frees the old one.
However, nsim_queue_start() failed to update the queue-to-NAPI mapping
via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to
point to the old NAPI struct. After the old queue was freed, a subsequent
queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN
slab-use-after-free read in nla_put_napi_id() when accessing
rxq->napi->napi_id.
Fix this by calling netif_queue_set_napi() in nsim_queue_start() to
associate the new NAPI with the RX queue, and clear the association
with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown.
Fixes: 5bc8e8dbef27 ("netdevsim: add queue management API support")
Reported-by: syzbot+483a6efbc4882c1201ee@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a82c3d4.f7a79266.2f965f.0024.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260817082511.2300402-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipa_remove() takes a runtime PM reference before accessing IPA hardware
during teardown. If a concurrent modem start or stop keeps
ipa_modem_stop() busy across both attempts, the callback intentionally
returns without releasing the remaining resources because proceeding
with teardown could crash. That return also skips the matching
pm_runtime_put_noidle(), leaving the callback's usage-count reference
held.
Drop only this runtime PM reference before returning.
pm_runtime_put_noidle() does not request an idle transition, so the
hardware and resources retained on this exceptional path remain
untouched while the usage count stays balanced.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: 923a6b698447 ("net: ipa: get clock in ipa_probe()")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260815151737.3758320-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nv_tx_timeout() dumps the register window in rows of eight dwords:
for (i = 0; i <= np->register_size; i += 32) {
netdev_info(dev, "%3x: %08x ... %08x\n", i,
readl(base + i + 0), ..., readl(base + i + 28));
The loop bound only checks the row's starting offset, so the final row
reads a full 32 bytes from a position that is below the end of the window
but too close to it. base is mapped with exactly that length:
np->base = ioremap(addr, np->register_size);
so the tail of that row is read from beyond the length the driver asked
for. Per variant, the last iteration reads past register_size by:
NV_PCI_REGSZ_VER1 (0x270): row 0x260 reads to 0x27f, 16 bytes over
NV_PCI_REGSZ_VER2 (0x2d4): row 0x2c0 reads to 0x2df, 12 bytes over
NV_PCI_REGSZ_VER3 (0x604): row 0x600 reads to 0x61f, 28 bytes over
This happens on every supported device, not just one of them. Note that
it is not a consequence of the sizes being odd: with i <= register_size
the offending row is reached whatever the size, and a size that were a
multiple of 32 would overrun by a full row rather than by a remainder.
To be precise about the severity: the reads stay inside the BAR. Memory
BAR sizes are powers of two, the driver only accepts a region with
pci_resource_len() >= register_size (forcedeth.c:5757-5762), and the
next power of two at or above each register_size already covers the
offending row: 0x400 for 0x270 and 0x2d4, 0x800 for 0x604. ioremap()
also rounds the mapped length up to page granularity, so the reads land
inside the mapping the CPU has as well. What they leave is the window
the driver asked for, not the BAR and not the mapping. That is still a
driver reading registers it did not ask for, and it is trivial to
avoid, but nobody should expect a fault from it.
Changing <= to < is not enough: register_size is a length and every size
above is larger than its last row start, so i still reaches the offending
row. Check that the whole row fits instead.
The trade-off is that a partial trailing row is no longer dumped: 16 bytes
for VER1, 20 for VER2, 4 for VER3. That seemed preferable to reading
outside the requested window, and to open-coding a second, narrower dump
for the remainder in what is a debug-only path. Extending the dump to
cover the tail can be done on top if anyone misses those registers.
Only reachable with the debug_tx_timeout module parameter, which defaults
to false. It has not been observed at runtime: forcing a genuine TX
timeout on the reference machine is not something I can do safely, so this
rests on the arithmetic above and on a build test, not on a reproduction.
UBSAN does not catch it either, since these are MMIO reads rather than an
array access. It was found by reading the function while fixing the
saved_config_space off-by-one in nv_suspend() and nv_resume().
The dump was introduced with a fixed 0x400 bound while ioremap() mapped
only NV_PCI_REGSZ (0x270), so it read about 0x190 bytes too far from the
start. Commit 86a0f04387bf ("[PATCH] forcedeth: fix initialization")
later replaced 0x400 with np->register_size, which shrank the overrun to
the remainder but did not remove it.
Fixes: c2dba06dae7d ("[PATCH] forcedeth: rewritten tx irq handling")
Signed-off-by: Marek Czernohous <marek@czernohous.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/178682367886.3748309.6978554332066826294@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nv_suspend() and nv_resume() walk the non-PCI configuration space with
for (i = 0; i <= np->register_size/sizeof(u32); i++)
which runs one iteration too many. saved_config_space is declared as
u32 saved_config_space[NV_PCI_REGSZ_MAX/4];
and NV_PCI_REGSZ_VER3 is equal to NV_PCI_REGSZ_MAX (0x604), so on a VER3
device register_size/sizeof(u32) is exactly the array length and the last
iteration addresses one element past the end.
The element it lands on is np->name_rx[0..3]: saved_config_space[] is
followed immediately by char name_rx[IFNAMSIZ + 3], and char needs no
padding. Nothing observable is corrupted by that, because nv_request_irq()
rewrites name_rx with sprintf() before it is ever passed to request_irq().
The bug is the out-of-bounds access itself, which UBSAN reports and which
CONFIG_UBSAN_TRAP=y turns into a trap that aborts the running kernel code,
plus an MMIO read and, on resume, an MMIO writel() to base + 0x604, one
dword past the range the driver mapped:
np->base = ioremap(addr, np->register_size);
VER1 and VER2 devices stay inside the array, but they too get the stray
read and the stray write one dword past their own window.
Caught by UBSAN on an Apple Macmini3,1 (MCP79) during a deep S3 cycle.
The splat below is trimmed: the build path in the file name, the CPU
and taint lines, the Workqueue line, the "?" hint frames, and the
frames below device_suspend are all cut. The kernel was tainted, with
an out-of-tree nouveau and CPU_OUT_OF_SPEC; forcedeth itself was the
stock module.
UBSAN: array-index-out-of-bounds in drivers/net/ethernet/nvidia/forcedeth.c:6225:25
index 385 is out of range for type 'u32 [385]'
Call Trace:
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_out_of_bounds.cold+0x54/0x59
__this_module+0xe398c/0xe9010 [forcedeth]
pci_pm_suspend+0x80/0x170
dpm_run_callback+0x51/0x160
device_suspend+0x1a2/0x4a0
...
Both loops are hit. UBSAN reports each source location only once per module
load (__ubsan_handle_out_of_bounds() calls suppress_report(), which does
test_and_set_bit(REPORTED_BIT, ...) on the struct source_location), so the
two splats land in the first S3 cycle after the module is loaded and later
cycles are silent even though the access still runs off the end every time.
In that first cycle line 6225 is reported from pci_pm_suspend and line 6240
from pci_pm_resume.
The same off-by-one was fixed in nv_get_regs() by commit ba9aa134287f
("forcedeth: fix buffer overflow") in 2012; these two loops were missed.
The suspend and resume side was reported on LKML in September 2013 by Marc
Weber, with the same analysis and the same one-character fix, but the patch
was attached rather than sent inline and the thread ended there.
Use < instead of <=, which saves and restores exactly register_size bytes.
Fixes: 1a1ca86158ee ("[netdrvr] forcedeth: save/restore device configuration space")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Czernohous <marek@czernohous.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/178682367885.3748309.10595890901761762683@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When modifying vport state, the firmware interprets a zero in the max tx
speed field as an intentional reset, which can overwrite previously set
values. This patch attempts to fix this by querying the current max tx
speed from firmware before modifying the vport state and passing it back
in the modification command. If the query fails, fall back to the cached
agg_max_tx_speed value to avoid inadvertently resetting the speed.
Fixes: 50f1d188c580 ("net/mlx5: Propagate LAG effective max_tx_speed to vports")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816065015.3280733-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5_query_vport_max_tx_speed() was introduced to serve the
query_port_speed path, which uses max_tx_speed == 0 when port is down.
This is incorrect for callers that need the actual configured speed
regardless of vport state, such as modify-vport-state helpers
that must preserve the speed across state transitions.
Move this logic to the caller function in the verb flow and let
mlx5_query_vport_max_tx_speed() return the raw firmware value
unconditionally.
Fixes: aaecff5e13cd ("RDMA/mlx5: Implement query_port_speed callback")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816065015.3280733-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Protect vport admin state modifications and vport iteration with the
eswitch state_lock mutex to ensure proper serialization of concurrent
vport state changes.
Currently, calls to mlx5_modify_vport_admin_state() and loops iterating
over eswitch vports can race with each other, potentially leading to
inconsistent vport state. Fix this by acquiring esw->state_lock
Fixes: 7d0314b11cdd ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816065015.3280733-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tbnet_poll() increments rx_packets once per received frame because that is
the NAPI work unit, and then adds the same number to stats.rx_packets. An
skb is handed to the stack only when the last frame of a packet arrives,
so once the MTU exceeds TBNET_MAX_PAYLOAD_SIZE the statistic reports
frames. tx_packets is bumped once per skb, so the two ends of a link
disagree: at MTU 65330 the receiver reports 16 times the packets its
sender sent.
rx_bytes has the matching problem: frames of a packet that is later
dropped mid-assembly are already accounted, so it does not correspond to
rx_packets as documented. Account for both where the packet is completed,
and leave the NAPI work counter alone.
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Fan Ye <fy15309206903@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://patch.msgid.link/20260815-tbnet-rx-stats-v1-1-8da375c2cd09@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix -Wimplicit-function-declaration error on CONFIG_OF=n builds:
drivers/net/ethernet/cadence/macb_main.c: In function ‘macb_probe’:
drivers/net/ethernet/cadence/macb_main.c:5951:15: error: implicit
declaration of function ‘macb_alloc_tieoff’ [...]
5951 | err = macb_alloc_tieoff(bp);
| ^~~~~~~~~~~~~~~~~
drivers/net/ethernet/cadence/macb_main.c:5973:9: error: implicit
declaration of function ‘macb_free_tieoff’ [...]
5973 | macb_free_tieoff(bp);
| ^~~~~~~~~~~~~~~~
Error got introduced because functions are mistakenly declared in a
`#if defined(CONFIG_OF)` block. Instead of moving functions around,
avoid any future mistake and drop the block entirely.
Change the module content slightly on CONFIG_OF=n. Previously match
tables were ignored. Now they appear in the resulting build. This is
considered trivial in size by most and is the common case:
⟩ 18 out of 254 OF net drivers reference CONFIG_OF
⟩ rg -lF 'MODULE_DEVICE_TABLE(of,' drivers/net/ | tee /tmp/a | wc -l
254
⟩ xargs -a /tmp/a rg -l CONFIG_OF | wc -l
18
Tangent: no, of_match_ptr() does not imply that the compiler can
optimize out match tables, because MODULE_DEVICE_TABLE(of, ...)
unconditionally puts the match tables in the binary. It is only meant
to avoid undefined declaration issues when match tables are hidden
behind a #ifdef, as was done before. We therefore drop the macro call.
Fixes: 5262eab9462a ("net: macb: allocate tieoff descriptor once across device lifetime")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260820-macb-fix-x86-v1-1-b2e7c902104e@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipa_start_xmit() unconditionally stops the TX queue before calling
pm_runtime_get(), relying on the wake scheduled by runtime resume
(ipa_modem_wake_queue_work()) to restart it once power is ACTIVE.
But that work is queued from within the runtime resume callback,
before the device's power state reaches RPM_ACTIVE, so it can run
while the device is still RPM_RESUMING. The wake is then consumed
too early: the transmit it restarts stops the queue again,
pm_runtime_get() returns -EINPROGRESS without arranging any future
wake (deferred_resume exists only for RPM_SUSPENDING), and after the
resume completes nothing is left to wake the queue. Transmit stalls
permanently: packets pile up in the qdisc behind the stopped queue,
the device runtime-suspends, and since the netdev registers no
ndo_tx_timeout the watchdog never fires. Observed on SM7635
(Fairphone 6) as the cellular data path going permanently deaf
within hours, RX included, since nothing resumes the suspended
endpoints.
Close the window by making the wake work wait for the resume to
complete (pm_runtime_get_sync()) before waking the queue. Every
queue stop is then guaranteed a later wake that happens while power
is ACTIVE; a transmit racing a new suspend/resume cycle re-schedules
the work. If the device could not be resumed, wake the queue anyway
so pending packets are dropped by the transmit path rather than
stranded.
The STARTED power flag used to narrow this window: a wake running
before the transmit path's stop suppressed that stop, but only once,
as the flag was cleared by the first stop it absorbed. Removing the
flag made a single transmit during an in-flight resume sufficient to
strand the queue, which is the form observed.
With an accelerated reproducer (autosuspend delay shortened to 5 ms,
~20 packets/s of TX), an unpatched kernel stalled three times in
230 s / 4380 packets; with this patch the same test ran 3601 s /
70298 packets without a stall.
Fixes: 688de12f080f ("net: ipa: kill the STARTED IPA power flag")
Cc: stable@vger.kernel.org
Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260815040302.653650-1-jorijnvdgraaf@catcrafts.net
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v7.3 merge window
This includes following USB4/Thunderbolt changes for the v7.3 merge
window:
- Assert Downstream Port Reset for Thunderbolt 3 devices during
shutdown to avoid unnecessary delays over warm reset.
- Tidy up Thunderbolt service ->probe callbacks.
- USB4STREAM improvements.
- AMD host interface quirk to fix Tx ring hang on teardown of a DMA tunnel.
- Minor fixes and cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Clamp DMA tunnel credits to what a hop register can hold
thunderbolt: Use min() for the DMA path credit cap
thunderbolt: debugfs: Replace get_zeroed_page() with kzalloc()
thunderbolt: Add quirk to reset host interface on DMA path teardown for AMD USB4 routers
thunderbolt: stream: Add support for busy polling
thunderbolt: Make interrupt optional for rings
thunderbolt: stream: Support IOCB_NOWAIT in non-blocking I/O as well
thunderbolt: stream: Fix possible short reads/writes
thunderbolt: stream: Restore consumer if copying from iter fails
thunderbolt: Remove redundant dev_err_probe()
docs: admin-guide: thunderbolt: Fix sentence structure
thunderbolt: xdomain: Notify peers after enumeration
thunderbolt: Drop comma after device id array terminator
thunderbolt: Assert that a service driver has a probe callback
thunderbolt: Stop passing matched device ID to .probe()
thunderbolt: Assert downstream port reset on shutdown
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.
On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup"
* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...
|
