| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ena_phc_gettimex64() is setting the output parameter regardless
of whether ena_com_phc_get_timestamp() succeeded or failed.
When ena_com_phc_get_timestamp() returns an error, the timestamp
parameter may contain uninitialized stack memory (e.g., when PHC is
disabled or in blocked state) or invalid hardware values. Passing
these to userspace via the PTP ioctl is both a security issue
(information leak) and a correctness bug.
Fix by checking the return code after releasing the lock and only
setting the output timestamp on success.
Fixes: e0ea34158ee8 ("net: ena: Add PHC support in the ENA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260507003518.22554-1-akiyano@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Copyright for Qualcomm changed its format and replaces the old
Qualcomm Innovative Center by Qualcomm Technology Inc.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Link: https://patch.msgid.link/20260317180833.3061582-1-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The driver uses a 'struct gpio_led' internally, but does not actually interact
with the gpio_led driver, in particular it does not actually use gpiolib here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428162955.614739-1-arnd@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add support for 5 GHz channel 177 with a center frequency of 5885 MHz and
Operating Class 125 per IEEE Std 802.11-2024 Table E-4.
Channels 169, 173, and 177 are in the 5.9 GHz band and must be disabled
when 5.9 GHz service bit is not supported. The 5.9 GHz band is only permitted
for WLAN operation under FCC regulations.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260415063857.2462256-1-yintang@qti.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The synclink_gt driver was marked as broken in commit 426263d5fb40
("tty: synclink_gt: mark as BROKEN") in July 2023 because it had severe
structural problems and there had been no evidence of users since 2016.
Since then, no meaningful improvements have been made to the driver,
and it is unlikely that will ever happen due to the lack of interest.
Drop the driver and references to it in comments and documentation.
include/uapi/linux/synclink.h is also removed. The only use of this
header I have found is the linux-raw-sys Rust crate. It generates
bindings for all UAPI headers, but has a hardcoded list of headers and
ioctls, including this one, so that does not indicate that anyone is
using it. I have sent a pull request to remove the include and ioctl
definitions for this header (see the link below).
Link: https://github.com/sunfishcode/linux-raw-sys/pull/185
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260504031519.18877-1-enelsonmoore@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove a field that was never used.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260507173443.320465-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a table has a miss table that was created by
'mlx5hws_table_set_default_miss' API function, its miss_tbl
keeps the table that points to it in a list.
If such table is deleted, we need to also remove it from the
miss_tbl list, otherwise the node in miss_tbl list will contain
garbage.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260507173443.320465-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case the device is down for any reason (e.g. FLR),
the HW will no longer generate completions - no point
polling and waiting for timeout.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260507173443.320465-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The for_each_child_of_node() loop captures mdio_np via break,
holding the refcount. of_mdiobus_register() does not consume the
reference, so it leaks on success.
Put it after registration.
Fixes: e6ad767305eb ("drivers: net: Add APM X-Gene SoC ethernet driver support.")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Link: https://patch.msgid.link/20260507142024.811543-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DW IP has two distinct PCS address ranges cooresponding
to the C45 PCS registers.
The shim translates the PCS addr/regno into specific CSR writes
into one of those two zero-relative ranges.
This patch fixes a one off in the test that could allow an invalid
CSR write if an addr == 2 was called.
There are is of yet, no real impact for the bug as no PCS writes are
present.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260507154203.3667-1-mike.marciniszyn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it.
Fixes: e0ea34158ee8 ("net: ena: Add PHC support in the ENA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260508062126.7273-1-akiyano@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All the KSZ switches use the same ksz_connect_tag_protocol while they
don't support all the KSZ tag protocols. So if, for some reason, a given
switch tries to connect another KSZ tag protocol, it won't fail.
Split the common ksz_connect_tag_protocol() into switch-specific
operations. This way, each switch will only accept to connect the tag
protocol it supports.
Remove the no longer used common operation.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-9-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All the switch families use a common function to implement
.get_tag_protocol(). This function then returns the relevant protocol
depending on the chip ID.
Make the protocol to dsa_switch_ops association a little bit more
obvious by having separate implementations.
Change made by manually checking which chip id has which dsa_switch_ops
assigned to it, then filtering the common ksz_get_tag_protocol() for
just those chip IDs pertaining to it.
As an important benefit, we no longer have that weird-looking
DSA_TAG_PROTO_NONE fallback which was never actually returned.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-8-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that each switch driver has its own dsa_switch_ops (currently a copy
of ksz_switch_ops), we no longer need ksz_switch_ops and can remove it.
Get to the driver-specific dsa_switch_ops through the ksz_chip_data
structure.
Reorder the alloc()/get_match_data() calls such as to have that
pointer available.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-7-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently we have a single dsa_switch_ops for 4 very distinct families
of switches, and many dsa_switch_ops methods are simply a dispatches
through ksz_dev_ops. That creates an avoidable level of indirection.
As a preparation for removing that indirection layer, create a separate
dsa_switch_ops structure wherever we have a ksz_dev_ops. These
structures are not yet used - ksz_switch_ops from ksz_common.c still is.
However, this reduces the noise from subsequent changes.
All new dsa_switch_ops are exact copies of ksz_switch_ops. But we need
to export function prototypes from ksz_common.c so that they are
callable from individual drivers.
Note that "individual drivers" are not actual separate kernel modules.
All of ksz8.c, ksz9477.c and lan937x_main.c are part of the same
ksz_switch.ko. Only the "register interface" drivers are different
modules (ksz9477_i2c.o for I2C, ksz_spi.o for SPI, ksz8863_smi.o for
MDIO). So we don't need to export any symbol.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-6-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to ksz_dev_ops, struct phylink_mac_ops shouldn't be part of
the common code. Instead, the common code should provide callable
functionality.
Invert the paradigm and export the common aspects from ksz_common.c, and
move the chip-specific stuff in individual drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-5-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ksz_dev_ops() are specific to each switch family so they should
belong to the individual drivers instead of the common section.
Move the ksz_dev_ops() definitions of the KSZ9477 and the LAN937 to
their individual drivers.
Set static the functions that aren't exported anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-4-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ksz_dev_ops() are specific to each switch family so they should
belong to the individual drivers instead of the common section.
Move the ksz_dev_ops() definitions of the KSZ8xxx to ksz8.c
Set static the functions that aren't exported anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-3-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz_dev_ops :: port_cleanup() isn't used anywhere.
Remove it.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-2-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz8_all_queues_split() isn't used anywhere.
Remove it.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-1-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for VHCA_ID-based page management mode. When the device
firmware advertises the icm_mng_function_id_mode capability with
MLX5_ID_MODE_FUNCTION_VHCA_ID, page management operations between the
driver and firmware may use vhca_id instead of function_id as the
effective function identifier, and the ec_function field is ignored.
Update page management commands to conditionally set ec_function field
only in FUNC_ID mode. Boot page allocation always uses FUNC_ID mode
semantics for backward compatibility, as the capability bit is only
available after set_hca_cap(). If after set_hca_cap() VHCA_ID mode was
set, modify the tracking of the boot pages in page_root_xa to use
vhca_id too.
Add mlx5_esw_vhca_id_to_func_type() to resolve the function type in
VHCA_ID mode, enabling per-type debugfs counters. Use a dedicated
vhca_type_map xarray, to provide lockless lookup. Store the resolved
type on each fw_page at allocation time so reclaim and release paths
read it directly without any lookup.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make the per function type debugfs page counters dynamically added after
mlx5_eswitch_init(). When page management operates in vhca_id mode, only
the function acting as either eSwitch or vport manager can initialize
the eSwitch structure and translate the vhca_id to function type for the
functions to which it supplies pages. The next patch will add support
for page management in vhca_id mode.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Several eswitch functions that only query other functions' HCA
capabilities or read cached vport state are guarded by the
vhca_resource_manager capability. This capability is required for
set_hca_cap operations but query_hca_cap of other functions only
requires the vport_group_manager capability.
Relax the capability check from vhca_resource_manager to
vport_group_manager in the following query-only paths:
- mlx5_esw_vport_caps_get() - queries other function general caps
- esw_ipsec_vf_query_generic() - queries other function ipsec cap
- mlx5_devlink_port_fn_migratable_get() - reads cached vport state
- mlx5_devlink_port_fn_roce_get() - reads cached vport state
- mlx5_devlink_port_fn_max_io_eqs_get() - queries other function caps
- mlx5_esw_vport_enable/disable() - vhca_id map/unmap
Functions that perform also set_hca_cap (migratable_set, roce_set,
max_io_eqs_set, esw_ipsec_vf_set_generic, esw_ipsec_vf_set_bytype)
retain the vhca_resource_manager requirement.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the device is removed all allocated resources should be freed.
In uhdlc_memclean the netdev transmit queue was already stopped. But at
this point we may have pending skb in the transmit queue which must be
freed. Therefore iterate over the tx_skbuff pointers and free all
pending skb. The issue was discovered by sashiko.
Tested on a ls1043a board running HDLC in bus mode on kernel 6.12.
https: //sashiko.dev/#/patchset/20260429114208.941011-1-holger.brunck%40hitachienergy.com
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Link: https://patch.msgid.link/20260507155332.3452319-1-holger.brunck@hitachienergy.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ixgbe_get_eee_e610() fills kedata->lp_advertised from pcaps.eee_cap
returned by ixgbe_aci_get_phy_caps() with IXGBE_ACI_REPORT_ACTIVE_CFG.
That report mode (and the other IXGBE_ACI_REPORT_* modes) describe the
local PHY only, not the link partner. The X550 path uses a separate
FW_PHY_ACT_UD_2 activity for partner data; the E610 ACI has no
equivalent.
Leave lp_advertised zeroed via the existing linkmode_zero() and drop
the now-unused ixgbe_eee_cap_map[]. eee_active/eee_enabled are
unaffected (sourced from link.eee_status).
Fixes: b61dbdeff3a9 ("ixgbe: E610: add EEE support")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260507-jk-iwl-next-fix-eee-ixgbe-v1-1-62bc1d197d1d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The error path on of_property_read_u32() failure inside
icssm_prueth_probe() returns without putting eth_ports_node,
which was acquired before the for_each_child_of_node() loop.
Drop it before returning.
Fixes: 511f6c1ae093 ("net: ti: icssm-prueth: Adds ICSSM Ethernet driver")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Link: https://patch.msgid.link/20260506195813.641610-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We currently more or less restart all the HW on resume. Since we also
stop the PHY, it takes a while for the PHY link to be re-negotiated on
resume. Instead of doing a full restart, we keep the HW state and the
PHY link, that way we can resume network traffic with a much smaller
delay.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260506213114.2002886-3-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To prepare for a partial bring up of the interface during resume,
we break apart the bcmasp_netif_init() function into smaller chunks
that can be called as necessary. Also consolidate some functions that
do not need to be standalone.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260506213114.2002886-2-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lan966x_probe_port() stores the newly allocated net_device in the
port before calling register_netdev(). If register_netdev() fails,
the probe error path calls lan966x_cleanup_ports(), which sees
port->dev and calls unregister_netdev() for a device that was never
registered.
Destroy the phylink instance created for this port and clear port->dev
before returning the registration error. The common cleanup path now skips
ports without port->dev before reaching the registered netdev cleanup, so
it only handles ports that reached the registered-netdev lifetime.
This also avoids treating an uninitialized FDMA netdev and the failed port
as a NULL == NULL match in the common cleanup path.
Fixes: d28d6d2e37d1 ("net: lan966x: add port module support")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260506124331.31945-1-mhun512@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CGU register definitions (ICE_CGU_R10, ICE_CGU_R11 and related field
masks) were placed after the #endif of the _ICE_DPLL_H_ include guard,
leaving them unprotected. Move them inside the guard.
Fixes: ad1df4f2d591 ("ice: dpll: Support E825-C SyncE and dynamic pin discovery")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-8-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The refactoring of ice_dpll_rclk_state_on_pin_get() to use
ice_dpll_pin_get_parent_idx() omitted the base_rclk_idx adjustment that was
correctly added in the ice_dpll_rclk_state_on_pin_set() path. This breaks
E810 devices where base_rclk_idx is non-zero, causing the wrong hardware
index to be used for pin state lookup and incorrect recovered clock state
to be reported via the DPLL subsystem. E825C is unaffected as its
base_rclk_idx is 0.
While at it, add bounds check against ICE_DPLL_RCLK_NUM_MAX on hw_idx after
the base_rclk_idx subtraction in both ice_dpll_rclk_state_on_pin_{get,set}()
to prevent out-of-bounds access on the pin state array.
Fixes: ad1df4f2d591 ("ice: dpll: Support E825-C SyncE and dynamic pin discovery")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-7-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the mutex_lock() call up to prevent that DCB settings change after
the first ice_query_port_ets() call. The second ice_query_port_ets()
call in ice_dcb_rebuild() is already protected by pf->tc_mutex.
This also fixes a bug in an error path, as before taking the first
"goto dcb_error" in the function jumped over mutex_lock() to
mutex_unlock().
This bug has been detected by the clang thread-safety analyzer.
Cc: intel-wired-lan@lists.osuosl.org
Fixes: 242b5e068b25 ("ice: Fix DCB rebuild after reset")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-6-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ice_set_rss_hfunc() performs a VSI update, in which it sets hashing
function, leaving other VSI options unchanged. However, ::q_opt_flags is
mistakenly set to the value of another field, instead of its original
value, probably due to a typo. What happens next is hardware-dependent:
On E810, only the first bit is meaningful (see
ICE_AQ_VSI_Q_OPT_PE_FLTR_EN) and can potentially end up in a different
state than before VSI update.
On E830, some of the remaining bits are not reserved. Setting them
to some unrelated values can cause the firmware to reject the update
because of invalid settings, or worse - succeed.
Reproducer:
sudo ethtool -X $PF1 equal 8
Output in dmesg:
Failed to configure RSS hash for VSI 6, error -5
Fixes: 352e9bf23813 ("ice: enable symmetric-xor RSS for Toeplitz hash function")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-5-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or
idpf_plug_core_aux_dev(), the err_aux_dev_add label calls
auxiliary_device_uninit() and falls through to err_aux_dev_init. The
uninit call will trigger put_device(), which invokes the release
callback (idpf_vport_adev_release / idpf_core_adev_release) that frees
iadev. The fall-through then reads adev->id from the freed iadev for
ida_free() and double-frees iadev with kfree().
Free the IDA slot and clear the back-pointer before uninit, while adev
is still valid, then return immediately.
Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization")
fixed the same use-after-free in the matching unplug path in this file but
missed both probe error paths.
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: stable@kernel.org
Fixes: be91128c579c ("idpf: implement RDMA vport auxiliary dev create, init, and destroy")
Fixes: f4312e6bfa2a ("idpf: implement core RDMA auxiliary dev create, init, and destroy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-4-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In idpf_ptp_init(), read_dev_clk_lock is initialized after
ptp_schedule_worker() had already been called (and after
idpf_ptp_settime64() could reach the lock). The PTP aux worker
fires immediately upon scheduling and can call into
idpf_ptp_read_src_clk_reg_direct(), which takes
spin_lock(&ptp->read_dev_clk_lock) on an uninitialized lock, triggering
the lockdep "non-static key" warning:
[12973.796587] idpf 0000:83:00.0: Device HW Reset initiated
[12974.094507] INFO: trying to register non-static key.
...
[12974.097208] Call Trace:
[12974.097213] <TASK>
[12974.097218] dump_stack_lvl+0x93/0xe0
[12974.097234] register_lock_class+0x4c4/0x4e0
[12974.097249] ? __lock_acquire+0x427/0x2290
[12974.097259] __lock_acquire+0x98/0x2290
[12974.097272] lock_acquire+0xc6/0x310
[12974.097281] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097311] ? lockdep_hardirqs_on_prepare+0xde/0x190
[12974.097318] ? finish_task_switch.isra.0+0xd2/0x350
[12974.097330] ? __pfx_ptp_aux_kworker+0x10/0x10 [ptp]
[12974.097343] _raw_spin_lock+0x30/0x40
[12974.097353] ? idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097373] idpf_ptp_read_src_clk_reg+0xb7/0x150 [idpf]
[12974.097391] ? kthread_worker_fn+0x88/0x3d0
[12974.097404] ? kthread_worker_fn+0x4e/0x3d0
[12974.097411] idpf_ptp_update_cached_phctime+0x26/0x120 [idpf]
[12974.097428] ? _raw_spin_unlock_irq+0x28/0x50
[12974.097436] idpf_ptp_do_aux_work+0x15/0x20 [idpf]
[12974.097454] ptp_aux_kworker+0x20/0x40 [ptp]
[12974.097464] kthread_worker_fn+0xd5/0x3d0
[12974.097474] ? __pfx_kthread_worker_fn+0x10/0x10
[12974.097482] kthread+0xf4/0x130
[12974.097489] ? __pfx_kthread+0x10/0x10
[12974.097498] ret_from_fork+0x32c/0x410
[12974.097512] ? __pfx_kthread+0x10/0x10
[12974.097519] ret_from_fork_asm+0x1a/0x30
[12974.097540] </TASK>
Move the call to spin_lock_init() up a bit to make sure read_dev_clk_lock
is not touched before it's been initialized.
Fixes: 5cb8805d2366 ("idpf: negotiate PTP capabilities and get PTP clock")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-3-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PTP pin structs are allocated early in probe, but never cleaned up.
Fix this by calling i40e_ptp_free_pins in the error path.
To support this, i40e_ptp_free_pins is added to the header and
pin_config is correctly nullified after being freed.
This has been an issue since i40e_ptp_alloc_pins was introduced.
Fixes: 1050713026a08 ("i40e: add support for PTP external synchronization clock")
Reported-by: Kohei Enju <kohei@enjuk.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Kohei Enju <kohei@enjuk.jp>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-2-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix two conditions which would leak PTP registration on probe failure:
1. i40e_setup_pf_switch can encounter an error in
i40e_setup_pf_filter_control, call i40e_ptp_init, then return
non-zero, sending i40e_probe to err_vsis.
2. i40e_setup_misc_vector can return non-zero, sending i40e_probe to
err_vsis.
Both of these conditions have been present since PTP was introduced in
this driver.
Found with coccinelle.
Fixes: beb0dff1251db ("i40e: enable PTP")
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-1-a5ea4dc837a9@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethtool on this phy device always reports "MDI-X: Unknown" and doesn't
support forcing it to on or off.
This patch adds support for reading/forcing MDI-X mode from ethtool
properly.
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260506141918.13136-1-l.ellero@asem.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch to the generic power management and remove the usage of legacy
(pci_driver) hooks.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260506165015.641738-1-vaibhavgupta40@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 383d89699c50 ("treewide: Drop pci_save_state() after
pci_restore_state()") sought to purge all superfluous invocations of
pci_save_state() from the tree.
Unfortunately the commit missed one invocation in the Broadcom
NetXtreme-C/E driver. Drop it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/39de1b025928d9a457976010b2324e7e99baa92a.1778158755.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The atl2 driver contains code for compatibility with old kernels that
do not support module_param_array. Backward compatibility is
irrelevant because this driver is in-tree. Remove this unreachable
code to simplify the driver's handling of module parameters.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260506054035.23710-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc3).
Conflicts:
net/ipv4/igmp.c
726fa7da2d8c ("ipv4: igmp: get rid of IGMPV3_{QQIC,MRC} and simplify calculation")
c6bebaa744f7 ("ipv4: igmp: annotate data-races in igmp_heard_query()")
https://lore.kernel.org/a7365e4873340f7a5e30411207de3bf9@kernel.org
Adjacent changes:
net/psp/psp_main.c
30cb24f97d44 ("psp: strip variable-length PSP header in psp_dev_rcv()")
c2b22277ad89 ("psp: validate IPv4 header fields in psp_dev_rcv()")
net/sched/sch_fq_codel.c
f83e07b29246 ("net/sched: sch_fq_codel: annotate data-races from fq_codel_dump_class_stats()")
3f3aa77ff1c8 ("net/sched: add qstats_cpu_drop_inc() helper")
net/wireless/pmsr.c
0f3c0a197309 ("wifi: nl80211: fix NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST usage")
410aa47fd9d3 ("wifi: cfg80211: allow suppressing FTM result reporting for PD requests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, IPsec, Bluetooth and WiFi.
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that IPv6
itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi:
- cw1200: revert "Fix locking in error paths"
- ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix:
- fix an issue between garbage collection and PEEK
- fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)"
* tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (190 commits)
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
net: sparx5: fix wrong chip ids for TSN SKUs
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
tcp: Fix dst leak in tcp_v6_connect().
ipmr: Call ipmr_fib_lookup() under RCU.
net: phy: broadcom: Save PHY counters during suspend
net/smc: fix missing sk_err when TCP handshake fails
af_unix: Reject SIOCATMARK on non-stream sockets
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
eth: fbnic: fix double-free of PCS on phylink creation failure
net: ethernet: cortina: Drop half-assembled SKB
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
selftests: mptcp: check output: catch cmd errors
mptcp: pm: prio: skip closed subflows
mptcp: pm: ADD_ADDR rtx: return early if no retrans
mptcp: pm: ADD_ADDR rtx: skip inactive subflows
mptcp: pm: ADD_ADDR rtx: resched blocked ADD_ADDR quicker
mptcp: pm: ADD_ADDR rtx: free sk if last
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
mptcp: pm: ADD_ADDR rtx: fix potential data-race
...
|
|
sparx5_port_init() only invokes sparx5_serdes_set() and the associated
shadow-device enable and low-speed device switch for SGMII and QSGMII.
On any port with a high-speed primary device (DEV5G/DEV10G/DEV25G)
configured for 1000BASE-X the serdes is therefore left uninitialized,
the DEV2G5 shadow is never enabled, and the port stays pointed at its
high-speed device rather than the DEV2G5. The PCS1G block looks
healthy in isolation, but no frames reach the link partner.
Add 1000BASE-X to the check so the same three steps run.
Note: the same issue might apply to 2500BASE-X, but that will,
eventually, be addressed in a separate commit.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-4-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TSN SKUs in enum spx5_target_chiptype have incorrect IDs:
SPX5_TARGET_CT_7546TSN = 0x47546,
SPX5_TARGET_CT_7549TSN = 0x47549,
SPX5_TARGET_CT_7552TSN = 0x47552,
SPX5_TARGET_CT_7556TSN = 0x47556,
SPX5_TARGET_CT_7558TSN = 0x47558,
The value read back from the chip is GCB_CHIP_ID_PART_ID, which is a
GENMASK(27, 12) field, i.e. at most 16 bits wide. It can never match
these IDs, so probing a TSN part fails with a "Target not supported"
error.
Fix the enum to use the actual 16-bit part IDs returned by the
hardware: 0x0546, 0x0549, 0x0552, 0x0556 and 0x0558.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-3-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nvt_set_phy_intf_sel()
priv->dev was never initialized after devm_kzalloc() allocates the
private data structure. When nvt_set_phy_intf_sel() is later invoked
via the phylink interface_select callback, it calls
nvt_gmac_get_delay(priv->dev, ...) which dereferences the NULL pointer.
Fix this by assigning priv->dev = dev immediately after allocation.
Fixes: 4d7c557f58ef ("net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family")
Signed-off-by: Joey Lu <a0987203069@gmail.com>
Link: https://patch.msgid.link/20260506084614.192894-2-a0987203069@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PHY counters can be lost if the PHY is reset during suspend. We
need to save the values into the shadow counters or the accounting
will be incorrect over multiple suspend and resume cycles.
Fixes: 820ee17b8d3b ("net: phy: broadcom: Add support code for reading PHY counters")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260505173926.2870069-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XDP redirect into a veth device (via bpf_redirect()) calls
veth_xdp_xmit(), which enqueues frames into the peer's ptr_ring using
smp_processor_id() % peer->real_num_rx_queues
as the ring index. With an asymmetric veth pair where the peer has
fewer TX queues than RX queues, that index can exceed
peer->real_num_tx_queues.
veth_poll() then resolves peer_txq for the ring via:
peer_txq = peer_dev ? netdev_get_tx_queue(peer_dev, queue_idx) : NULL;
where queue_idx = rq->xdp_rxq.queue_index. When queue_idx exceeds
peer_dev->real_num_tx_queues this is an out-of-bounds (OOB) access
into the peer's netdev_queue array, triggering DEBUG_NET_WARN_ON_ONCE
in netdev_get_tx_queue().
The normal ndo_start_xmit path is not affected: the stack clamps
skb->queue_mapping via netdev_cap_txqueue() before invoking
ndo_start_xmit, so rxq in veth_xmit() never exceeds real_num_tx_queues.
Fix veth_poll() by clamping: only dereference peer_txq when queue_idx is
within bounds, otherwise set it to NULL. The out-of-range rings are fed
exclusively via XDP redirect (veth_xdp_xmit), never via ndo_start_xmit
(veth_xmit), so the peer txq was never stopped and there is nothing to
wake; NULL is the correct fallback.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260502071828.616C3C19425@smtp.kernel.org/
Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260505132159.241305-2-hawk@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fbnic_phylink_create() stores the newly allocated PCS in fbn->pcs and
then calls phylink_create(). When phylink_create() fails, the error path
correctly destroys the PCS via xpcs_destroy_pcs(), but the caller,
fbnic_netdev_alloc(), responds by invoking fbnic_netdev_free() which
calls fbnic_phylink_destroy(). That function finds fbn->pcs non-NULL and
calls xpcs_destroy_pcs() a second time on the already-freed object,
triggering a refcount underflow use-after-free:
[ 1.934973] fbnic 0000:01:00.0: Failed to create Phylink interface, err: -22
[ 1.935103] ------------[ cut here ]------------
[ 1.935179] refcount_t: underflow; use-after-free.
[ 1.935252] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x59/0x90, CPU#0: swapper/0/1
[ 1.935389] Modules linked in:
[ 1.935484] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-virtme-04244-g1f5ffc672165-dirty #1 PREEMPT(lazy)
[ 1.935661] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 1.935826] RIP: 0010:refcount_warn_saturate+0x59/0x90
[ 1.935931] Code: 44 48 8d 3d 49 f9 a7 01 67 48 0f b9 3a e9 bf 1e 96 00 48 8d 3d 48 f9 a7 01 67 48 0f b9 3a c3 cc cc cc cc 48 8d 3d 47 f9 a7 01 <67> 48 0f b9 3a c3 cc cc cc cc 48 8d 3d 46 f9 a7 01 67 48 0f b9 3a
[ 1.936274] RSP: 0000:ffffd0d440013c58 EFLAGS: 00010246
[ 1.936376] RAX: 0000000000000000 RBX: ffff8f39c188c278 RCX: 000000000000002b
[ 1.936524] RDX: ffff8f39c004f000 RSI: 0000000000000003 RDI: ffffffff96abab00
[ 1.936692] RBP: ffff8f39c188c240 R08: ffffffff96988e88 R09: 00000000ffffdfff
[ 1.936835] R10: ffffffff96878ea0 R11: 0000000000000187 R12: 0000000000000000
[ 1.936970] R13: ffff8f39c0cef0c8 R14: ffff8f39c1ac01c0 R15: 0000000000000000
[ 1.937114] FS: 0000000000000000(0000) GS:ffff8f3ba08b4000(0000) knlGS:0000000000000000
[ 1.937273] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.937382] CR2: ffff8f3b3ffff000 CR3: 0000000172642001 CR4: 0000000000372ef0
[ 1.937540] Call Trace:
[ 1.937619] <TASK>
[ 1.937698] xpcs_destroy_pcs+0x25/0x40
[ 1.937783] fbnic_netdev_alloc+0x1e5/0x200
[ 1.937859] fbnic_probe+0x230/0x370
[ 1.937939] local_pci_probe+0x3e/0x90
[ 1.938013] pci_device_probe+0xbb/0x1e0
[ 1.938091] ? sysfs_do_create_link_sd+0x6d/0xe0
[ 1.938188] really_probe+0xc1/0x2b0
[ 1.938282] __driver_probe_device+0x73/0x120
[ 1.938371] driver_probe_device+0x1e/0xe0
[ 1.938466] __driver_attach+0x8d/0x190
[ 1.938560] ? __pfx___driver_attach+0x10/0x10
[ 1.938663] bus_for_each_dev+0x7b/0xd0
[ 1.938758] bus_add_driver+0xe8/0x210
[ 1.938854] driver_register+0x60/0x120
[ 1.938929] ? __pfx_fbnic_init_module+0x10/0x10
[ 1.939026] fbnic_init_module+0x25/0x60
[ 1.939109] do_one_initcall+0x49/0x220
[ 1.939202] ? rdinit_setup+0x20/0x40
[ 1.939304] kernel_init_freeable+0x1b0/0x310
[ 1.939449] ? __pfx_kernel_init+0x10/0x10
[ 1.939560] kernel_init+0x1a/0x1c0
[ 1.939640] ret_from_fork+0x1ed/0x240
[ 1.939730] ? __pfx_kernel_init+0x10/0x10
[ 1.939805] ret_from_fork_asm+0x1a/0x30
[ 1.939886] </TASK>
[ 1.939927] ---[ end trace 0000000000000000 ]---
[ 1.940184] fbnic 0000:01:00.0: Netdev allocation failed
Instead of calling fbnic_phylink_destroy(), the prior initialization of
netdev should just be unrolled with free_netdev() and clearing
fbd->netdev.
Clearing fbd->netdev to NULL avoids UAF in init_failure_mode where
callers guard by checking !fbd->netdev, such as fbnic_mdio_read_pmd().
These callers remain active even after a failed probe, so fdb->netdev
still needs to be cleared.
Fixes: d0fe7104c795 ("fbnic: Replace use of internal PCS w/ Designware XPCS")
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260504-fbnic-pcs-fix-v2-1-de45192821d9@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
