| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The memory allocated in ipc_protocol_init() is not freed on the error
paths that follow in ipc_imem_init(). Fix that by calling the
corresponding release function ipc_protocol_deinit() in the error path.
Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260519062815.55545-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the ethtool private statistics interface to expose additional
port-level and MAC-level counters that are not covered by the standard
IEEE 802.3 statistics. The pMAC counters are only reported when the port
supports Frame Preemption (802.1Qbu/802.3br).
Note that although rtnl_link_stats64 provides some standard statistics
such as rx octets, rx frame errors, rx dropped packets, and tx packets,
these are overall port statistics. The NETC switch supports preemption
on each port, and each port has two MACs (eMAC and pMAC). The driver
private statistics are used to obtain statistics for each MAC, allowing
users to perform analysis and debugging.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-16-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Each user port of the NETC switch supports 802.3 basic and mandatory
managed objects statistic counters and IETF Management Information
Database (MIB) package (RFC2665) and Remote Network Monitoring (RMON)
counters. And all of these counters are 64-bit registers. In addition,
some user ports support preemption, so these ports have two MACs, MAC
0 is the express MAC (eMAC), MAC 1 is the preemptible MAC (pMAC). So
for ports that support preemption, the statistics are the sum of the
pMAC and eMAC statistics.
Note that the current switch driver does not support preemption, all
frames are sent and received via the eMAC by default. The statistics
read from the pMAC should be zero.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-15-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The buffer pool is a quantity of memory available for buffering a group
of flows (e.g. frames having the same priority, frames received from the
same port), while waiting to be transmitted on a port. The buffer pool
tracks internal memory consumption with upper bound limits and optionally
a non-shared portion when associated with a shared buffer pool. Currently
the shared buffer pool is not supported, it will be added in the future.
For i.MX94, the switch has 4 ports and 8 buffer pools, so each port is
allocated two buffer pools. For frames with priorities of 0 to 3, they
will be mapped to the first buffer pool; For frames with priorities of
4 to 7, they will be mapped to the second buffer pool. Each buffer pool
has a flow control on threshold and a flow control off threshold. By
setting these threshold, add the flow control support to each port.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-14-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Expand the NETC switch driver with several foundational features:
- FDB and MDB management
- STP state handling
- MTU configuration
- Port setup/teardown
- Host flooding support
At this stage, the driver operates only in standalone port mode. Each
port uses VLAN 0 as its PVID, meaning ingress frames are internally
assigned VID 0 regardless of whether they arrive tagged or untagged.
Note that this does not inject a VLAN 0 header into the frame, the VID
is used purely for subsequent VLAN processing within the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-13-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Different versions of NETC switches have different numbers of ports and
MAC capabilities. Add .phylink_get_caps() to struct netc_switch_info,
allowing each NETC switch version to implement its own callback for
obtaining MAC capabilities.
Implement the phylink_mac_ops callbacks: .mac_config(), .mac_link_up(),
and .mac_link_down(). Note that flow-control configuration is not yet
supported in .mac_link_up(), but will be implemented in a subsequent
patch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260518082506.1318236-12-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For i.MX94 series, the NETC IP provides full 802.1Q Ethernet switch
functionality, advanced QoS with 8 traffic classes, and a full range of
TSN standards capabilities. The switch has 3 user ports and 1 CPU port,
the CPU port is connected to an internal ENETC. Since the switch and the
internal ENETC are fully integrated within the NETC IP, no back-to-back
MAC connection is required. Instead, a light-weight "pseudo MAC" is used
between the switch and the ENETC. This translates to lower power (less
logic and memory) and lower delay (as there is no serialization delay
across this link).
Introduce the initial NETC switch driver with basic probe and remove
functionality. More features will be added in subsequent patches.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-11-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All the tables of NETC switch are managed through the command BD ring,
but unlike ENETC, the switch has two command BD rings, if the current
ring is busy, the switch driver can switch to another ring to manage
the table. Currently, the NTMP driver does not support multiple rings.
Therefore, update ntmp_select_and_lock_cbdr() to select a appropriate
ring to execute the command for the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-9-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ingress port filter table (IPFT )contains a set of filters each
capable of classifying incoming traffic using a mix of L2, L3, and L4
parsed and arbitrary field data. As a result of a filter match, several
actions can be specified such as on whether to deny or allow a frame,
overriding internal QoS attributes associated with the frame and setting
parameters for the subsequent frame processing functions, such as stream
identification, policing, ingress mirroring. Each entry corresponds to a
filter. The ingress port filter entries are added using a precedence
value. If a frame matches multiple entries, the entry with the higher
precedence is used. Currently, this patch only adds "Add" and "Delete"
operations to the ingress port filter table. These two interfaces will
be used by both ENETC driver and NETC switch driver.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-8-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The buffer pool table contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. The Entry ID value
represents the buffer pool ID to access.
The buffer pool table is a static bounded index table, buffer pools are
always present and enabled. It only supports Update and Query operations,
This patch only adds ntmp_bpt_update_entry() helper to support updating
the specified entry of the buffer pool table. Query action to the table
will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-7-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The VLAN filter table contains configuration and control information for
each VLAN configured on the switch. Each VLAN entry includes the VLAN
port membership, which FID to use in the FDB lookup, which spanning tree
group to use, the egress frame modification actions to apply to a frame
exiting form this VLAN, and various configuration and control parameters
for this VLAN.
The VLAN filter table can only be managed by the command BD ring using
table management protocol version 2.0. The table supports Add, Delete,
Update and Query operations. And the table supports 3 access methods:
Entry ID, Exact Match Key Element and Search. But currently we only add
the ntmp_vft_add_entry() helper to support the upcoming switch driver to
add an entry to the VLAN filter table. Other interfaces will be added in
the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-6-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The FDB table is used for MAC learning lookups and MAC forwarding lookups.
Each table entry includes information such as a FID and MAC address that
may be unicast or multicast and a forwarding destination field containing
a port bitmap identifying the associated port(s) with the MAC address.
FDB table entries can be static or dynamic. Static entries are added from
software whereby dynamic entries are added either by software or by the
hardware as MAC addresses are learned in the datapath.
The FDB table can only be managed by the command BD ring using table
management protocol version 2.0. Table management command operations Add,
Delete, Update and Query are supported. And the FDB table supports three
access methods: Entry ID, Exact Match Key Element and Search. This patch
adds the following basic supports to the FDB table.
ntmp_fdbt_update_entry() - update the configuration element data of a
specified FDB entry
ntmp_fdbt_delete_entry() - delete a specified FDB entry
ntmp_fdbt_add_entry() - add an entry into the FDB table
ntmp_fdbt_search_port_entry() - Search the FDB entry on the specified
port based on RESUME_ENTRY_ID.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before probing the NETC switch driver, some pre-initialization needs to
be set in NETCMIX and IERB to ensure that the switch can work properly.
For example, i.MX94 NETC switch has three external ports and each port
is bound to a link. And each link needs to be configured so that it can
work properly, such as I/O variant and MII protocol.
In addition, the switch port 2 (MAC 2) and ENETC 0 (MAC 3) share the same
parallel interface, they cannot be used at the same time due to the SoC
constraint. And the MAC selection is controlled by the mac2_mac3_sel bit
of EXT_PIN_CONTROL register. Currently, the interface is set for ENETC 0
by default unless the switch port 2 is enabled in the DT node.
Like ENETC, each external port of the NETC switch can manage its external
PHY through its port MDIO registers. And the port can only access its own
external PHY by setting the PHY address to the LaBCR[MDIO_PHYAD_PRTAD].
If the accessed PHY address is not equal to LaBCR[MDIO_PHYAD_PRTAD], then
the MDIO access initiated by port MDIO will be invalid.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-4-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Refactor the host-PF-specific mlx5_cmd_host_pf_enable/disable_hca()
into generic mlx5_cmd_pf_enable/disable_hca() that accept a vport
number. The new functions use vhca_id as function_id when supported.
Similarly, refactor the eswitch layer into generic static helpers
mlx5_esw_pf_enable/disable_hca() with thin wrappers for the host PF
case, in preparation for enable_hca on satellite PF vports.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-9-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use mlx5_vport_set_other_func_cap() and
mlx5_vport_set_other_func_general_cap() in the IPsec eswitch functions
instead of open-coding the SET_HCA_CAP command. This removes redundant
buffer allocation and boilerplate, and also enables vhca_id based
addressing when supported.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-8-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use mlx5_vport_set_other_func_general_cap() instead of open-coding the
SET_HCA_CAP command. This removes redundant buffer allocation and
ensures consistent use of vport-based function addressing.
mlx5_vport_set_other_func_general_cap() supports both function_id and
vhca_id based addressing, so this also enables SET_HCA_CAP for vhca_id
indexed functions which was not supported before.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-7-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add mlx5_vport_set_other_func_general_cap() convenience macro, symmetric
to the existing mlx5_vport_get_other_func_general_cap(), and use it in
mlx5_devlink_port_fn_roce_set().
No functional change in this patch.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-6-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mlx5_vport_set_other_func_cap() and mlx5_vport_get_vhca_id() allocate
command buffers that embed the HCA capability union, exceeding 4KiB.
Use kvzalloc/kvfree so the allocation can fall back to vmalloc when
contiguous memory is scarce.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-5-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
IPsec eswitch offload operations and the enabled_ipsec_vf_count counter
are intended for VF vports only. Replace the MLX5_VPORT_HOST_PF checks
with mlx5_eswitch_is_vf_vport() to properly identify VF vports, as
preparation for adding another type of PF vports.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-4-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the v1 response layout for the query_esw_functions command when
supported by the device. When query_host_net_function_v1 capability is
set, use MLX5_QUERY_ESW_FUNC_OP_MOD_LAYOUT_V1 to retrieve parameters
for multiple network functions, allocating the output buffer according
to query_host_net_function_num_max. Validate that firmware does not
return more entries than the allocated buffer.
The v1 layout reports vhca_state instead of the legacy host_pf_disabled
bit. PFs transition through ALLOCATED, ACTIVE, and IN_USE states (they
do not use TEARDOWN_REQUEST as SFs do). When the ECPF calls disable_hca,
firmware resets the PF and moves it to ALLOCATED. When the ECPF calls
enable_hca, the PF moves to ACTIVE, and once the PF driver enables it,
it reaches IN_USE. The PF is only fully operational in IN_USE, so
pf_disabled is derived as vhca_state != IN_USE, equivalent to the legacy
host_pf_disabled bit.
The mlx5_esw_get_host_pf_info() helper abstracts parsing the command
output in both legacy and new formats, so callers do not need to handle
the different layouts.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-3-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a helper mlx5_esw_get_host_pf_info() to retrieve host PF data from
the query_esw_functions command output, so callers no longer need to
parse the layout to obtain the required information.
Convert all callers of mlx5_esw_query_functions() to use the new helper,
preparing for upcoming support of the new op_mod that returns data in
the network_function_params layout.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Validate rx-internal-delay-ps and tx-internal-delay-ps against the
hardware capabilities of the EIC7700 MAC.
The programmable RGMII delay supports 20 ps steps and a maximum value of
2540 ps. The driver previously accepted arbitrary values and silently
truncated unsupported settings when converting them to hardware units.
As a result, invalid device tree values could lead to unexpected delay
programming and incorrect RGMII timing.
Reject delay values that are not multiples of 20 ps or exceed the
supported hardware range.
Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022214.507-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The EIC7700 MAC implements programmable RGMII delay adjustment with a
granularity of 20 ps per hardware step.
The driver previously converted rx-internal-delay-ps and
tx-internal-delay-ps values using a 100 ps step size, resulting in
incorrect delay programming.
Update the conversion to use the correct 20 ps granularity so the
programmed delay matches the values described in the device tree.
Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022156.484-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clear the TXD and RXD delay control registers during EIC7700 DWMAC
initialization.
These registers may retain values programmed by the bootloader. If left
unchanged, residual delays can alter the effective RGMII timing seen by
the MAC and override the configuration described by the device tree.
This may violate the expected RGMII timing model and can cause link
instability or prevent the Ethernet controller from operating correctly.
Explicitly clearing these registers ensures that the MAC delay settings
are determined solely by the kernel configuration.
The corresponding register offsets are optional, and the registers are
only cleared when the offsets are provided in the device tree.
Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022137.464-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the initialization ordering of the HSP CSR configuration in the
EIC7700 DWMAC glue driver.
The HSP CSR registers control MAC-side RGMII delay behavior and must
only be accessed after the corresponding clocks are enabled. The
previous implementation could trigger register access before clock
enablement, leading to undefined behavior depending on boot state.
Move the HSP CSR configuration into the post-clock-enable initialization
path to ensure all register accesses occur under valid clock domains.
This change ensures deterministic initialization and prevents
clock-dependent register access failures during probe or resume.
Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Link: https://patch.msgid.link/20260518022055.444-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
kernel test robot reported sparse warning in bareudp_sock_release():
drivers/net/bareudp.c:288:12: warning: incorrect type in assignment (different address spaces)
drivers/net/bareudp.c:288:12: expected struct sock *sk
drivers/net/bareudp.c:288:12: got struct sock [noderef] __rcu *sk
The warning is not new and exists since the initial bareudp commit
571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling
different protocols like MPLS, IP, NSH etc.").
Let's use rtnl_dereference().
Note that bareudp_sock_release() is called from bareudp_stop()
under RTNL, so there is no real issue even without the helper.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605062359.e3gOfZCr-lkp@intel.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
synchronize_net() in bareudp_sock_release() has existed since
day 1, commit 571912c69f0e ("net: UDP tunnel encapsulation module
for tunnelling different protocols like MPLS, IP, NSH etc.").
It was most likely copied from a similar tunneling device like
vxlan or geneve.
bareudp_sock_release() is called from dev->netdev_ops->ndo_stop(),
and synchronize_net() in unregister_netdevice_many_notify() ensures
that inflight bareudp fast paths finish before bareudp_dev is freed.
Let's remove the redundant synchronize_net() in bareudp_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When changing the geneve config, geneve_changelink() sandwiches
the config memcpy() between geneve_quiesce() and geneve_unquiesce().
geneve_quiesce() temporarily clears geneve->sock[46] and their
sk_user_data, and then calls synchronize_net() to wait for inflight
fast paths to finish.
geneve_unquiesce() then restores the cleared pointers, but it also
superfluously calls synchronize_net().
The latter synchronize_net() provides no benefit; with or without it,
inflight fast paths can see either the NULL pointers or the original
pointers alongside the new configuration.
Let's remove the redundant synchronize_net() in geneve_unquiesce().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vxlan previously had an issue where the fast path could access
stale pointers, which was fixed by commit c6fcc4fc5f8b ("vxlan:
avoid using stale vxlan socket.").
geneve later followed the same pattern, and commit fceb9c3e3825
("geneve: avoid using stale geneve socket.") copied synchronize_net()
from vxlan_sock_release() into geneve_sock_release().
However, that change occurred after commit ca065d0cf80f ("udp: no
longer use SLAB_DESTROY_BY_RCU"), and geneve had already been
using kfree_rcu() to free geneve_sock.
Therefore, the synchronize_net() was never actually needed there.
Let's remove the redundant synchronize_net() in geneve_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initially, a dedicated workqueue was used to defer calling
udp_tunnel_sock_release(vxlan_sock->sock) and kfree(vxlan_sock).
Later, commit 0412bd931f5f ("vxlan: synchronously and race-free
destruction of vxlan sockets") removed the workqueue and instead
invoked these two functions immediately after synchronize_net().
This was intended to prevent UAF of the UDP socket in the fast path.
( Note that the "nondeterministic behaviour" mentioned in that
commit was not addressed, as another thread not waiting RCU gp
still sees the same behaviour. )
However, a week prior to that change, commit ca065d0cf80f ("udp:
no longer use SLAB_DESTROY_BY_RCU") had already moved UDP socket
freeing to after the RCU grace period. This made the synchronize_net()
in vxlan_sock_release() completely redundant.
Since vxlan_sock now uses kfree_rcu() and is invoked after
udp_tunnel_sock_release(), vxlan_sock is guaranteed to be freed
either at the same time or after the UDP socket is released,
following the RCU grace period.
Let's remove the redundant synchronize_net() in vxlan_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260519140101.1584946-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching these arrays, unify usage of whitespace in the list
terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260519145722.1590298-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching this array, unify usage of whitespace in the list
terminator to what most other arrays are using.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260519153613.1594429-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260519160721.1597568-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PPCNT group 0x10 (per-priority counters) carries an rx_discards field at
offset 0x78. These counters aggregate up into if_in_discards, but don't
show up anywhere else. Since there are many things that aggregate into
`if_in_discards`, having these counters helps distinguish what caused
those discards (in my case they were caused by headroom buffer overruns
due to inappropriately configured buffer sizes).
Of note, from emperical testing, these counter are per-"priority group"
(PG) not per-"switch priority". It's a bit confusing, because the rest
of these counter are per-"switch priority" and the header file calls
these "Per Priority Group Counters". However, that should be read as
"(Per Priority) Group Counters", not "Per (Priority Group) Counters".
I attempted to distinguish this in the counter naming by calling these
`rx_discards_pg_N` rather than `rx_discards_prio_N` (which is the
naming scheme of the other counters in this PPCNT group).
I will also note that the mlx5 driver (which already has this counter)
uses the schme `rx_prioN_discards` (and same for the other counters
in this group). However, I was unable to determine whether the mlx5
counters behave the same as the mlxsw counters with respect to PG
mapping. An attempt to remap to a different PG there did not change
which counter incremented, but the mlx5 configuration code is quite
different, so it's possible the remapping needs to be done differently.
Signed-off-by: Keno Fischer <keno@juliahub.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/agqkMwgM1PdkyMUR@juliahub.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
am65_cpsw_nuss_ndo_slave_add_vid() returns early at the top with:
if (!netif_running(ndev) || !vid)
return 0;
so vid is guaranteed to be non-zero in the rest of the function. The
subsequent
if (!vid)
unreg_mcast = port_mask;
is therefore unreachable. Drop the dead branch.
With that branch gone, unreg_mcast is only ever its initializer value
of zero, so drop the variable and pass 0 directly to
cpsw_ale_vlan_add_modify().
No functional change.
Found by Smatch.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/aS_lhMwppbDHoEcX@stanley.mountain
Signed-off-by: Alexander Vassilevski <oss@vassilevski.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260517220757.2679458-1-oss@vassilevski.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q
module.
The module can be put in different modes via AT commands
to enable/disable GPS functionality:
MODEM - PPP mode(2dee:4d63): AT+SER=1,1
If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: MODEM
If#= 3: AT
P: Vendor=2dee ProdID=4d63 Rev=05.15
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=1bd51f0e
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
NMEA mode(2dee:4d64): AT+SER=51,1
If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: NMEA
If#= 3: AT
P: Vendor=2dee ProdID=4d64 Rev=05.15
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=1bd51f0e
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
Signed-off-by: Jan Volckaert <janvolck@gmail.com>
Link: https://patch.msgid.link/20260517153237.55995-2-janvolck@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Complete error handling for a failed platform_get_irq() call
Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260516212616.11758-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for configuring swapping of MDI pairs (ABCD->DCBA) when the
property "enet-phy-pair-order" is specified.
Unfortunately, no documentation about this feature is available, but
this implementation still tries to avoid magic numbers and raw register
numbers where it seems clear what is going on.
As it is unknown whether the patching step can be safely reversed, only
enabling MDI swapping is fully supported. A value of "0" for the "enet-
phy-pair-order" property is not accepted if the PHY has already been
patched for MDI swapping (however, this should not occur in practice).
Some other Realtek PHYs also support similar mechanisms:
- RTL8221B-VB-CG allows to configure MDI swapping via the same register,
but does not need the additional patching step. However, it is unclear
whether a driver implementation for that PHY is necessary, as it is
known to support configuration via strapping pins (which is working
fine at least in Zyxel XGS1210-12 rev B1).
- The patching step seems to match the one for the integrated PHYs of
some Realtek PCIe/USB NICs (see for example the r8152 driver).
For now, only implement this for the RTL8226-CG PHY, where it is needed
for the switches Zyxel XGS1010-12 rev A1 and XGS1210-12 rev A1.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://patch.msgid.link/20260516190456.387768-1-jan@3e8.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating
software state and skipping hardware offload setup.
That path jumps to the common success label before taking the eswitch mode
block. After tunnel-mode validation was moved earlier, the common success
label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs,
this decrements esw->offloads.num_block_mode without a matching increment.
Return directly after installing the acquire SA offload handle, so only the
paths that successfully called mlx5_eswitch_block_mode() call the matching
unblock.
Fixes: 22239eb258bc ("net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed")
Signed-off-by: Prathamesh Deshpande <prathameshdeshpande7@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260510225903.13184-1-prathameshdeshpande7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 9587ed8137fb83d93f84b858337412f4500b21e9,
reversing changes made to bcdfd9fb109e0c9d76c345b2346b6b75ed1f476d.
Per tglx's objections: https://lore.kernel.org/87mrxtwzz9.ffs@tglx
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function ieee80211_tx_status() was renamed to
ieee80211_tx_status_skb() by commit 2703bc851399
("wifi: mac80211: rename ieee80211_tx_status() to
ieee80211_tx_status_skb()"). Update the stale reference
in ath10k_htt_tx_hl().
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260321110011.8556-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
If there is an error during some initialization related to firmware,
the buffers dp->tx_ring[i].tx_status are released.
However this is released again when the device is unbinded (ath11k_pci),
and we get:
WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90
Call Trace:
free_large_kmalloc
ath11k_dp_free
ath11k_core_deinit
ath11k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set the buffers to NULL after releasing in
order to avoid the double free.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420110130.509670-1-jtornosm@redhat.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Switch from sign_extend32(FIELD_GET()) to the dedicated
FIELD_GET_SIGNED() and don't calculate the fields length explicitly.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
The Prism54 SPI driver hardcodes GPIO numbers and expects users to
pass them as module parameters, apparently a relic from its life as a
staging driver. This works because there is only one user, the Nokia
N8x0 tablet.
Convert this to the gpio descriptor interface and DT based probing
to improve this and simplify the code at the same time.
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507212451.3333185-3-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Do not declare support for Extended Key ID for NAN, as defined in
section 7.4 in the WiFi Aware specification v4.0 (in order to support
security association upgrade).
Fixes: eaa7ce66c3e2 ("wifi: mac80211_hwsim: Fix possible NULL dereference")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260515141442.365ca3ab29f9.Ib435168dcc1d7d8719a5612109035ca1950967ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This doesn't really do anything, but we can advertise it and then
check that the AP can be configured and client can connect, etc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260512224724.abfd51f480b7.I2024d7fc8067a0fca26234f312937cc764b660f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When userspace creates a new hwsim radio with both
HWSIM_ATTR_MULTI_RADIO and HWSIM_ATTR_SUPPORT_NAN_DEVICE,
hwsim_new_radio_nl() sets BIT(NL80211_IFTYPE_NAN_DATA) in
wiphy->interface_modes while configuring the wiphy with
n_radio > 1. This violates the invariant checked in
wiphy_register():
(interface_modes & BIT(NL80211_IFTYPE_NAN_DATA)) &&
(!nan_capa.phy.ht.ht_supported || n_radio > 1)
triggering a WARN reachable from userspace via genetlink.
With panic_on_warn this becomes a denial of service.
Refuse the combination at parse time with -EINVAL and an
extack message, matching the cfg80211 constraint that NAN
is not supported on multi-radio wiphys.
Reported-by: syzbot+2002864e6c6895cb0ac3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2002864e6c6895cb0ac3
Fixes: 2c7c70ee7cee ("wifi: mac80211_hwsim: enable NAN_DATA interface simulation support")
Tested-by: syzbot+2002864e6c6895cb0ac3@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260509004628.79446-1-kartikey406@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
init and exit do nothing interesting that module_usb_driver doesn't
already handle. Just use module_usb_driver to simplify the code.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260507015457.239807-1-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Instead of being creative with devm, allocate with rt2x00dev by using a
flexible array member. Simplifies code slightly.
It's worth noting that in 25369b22223d1c56e42a0cd4ac9137349d5a898e , the
proper device was set to the devm call as it seems there was confusion
there.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260430232206.141461-1-rosenp@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
