| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
regcache_sync() currently stores the return value from both cache
synchronization and selector register rewriting in the same variable.
As a result, a successful selector register rewrite can overwrite an
earlier cache synchronization error, causing regcache_sync() to return
success even though synchronization failed.
Track the two operations with separate return variables and preserve the
cache synchronization error. Errors from rewriting selector registers are
returned only if cache synchronization completed successfully.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260713050312.38729-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If an empty firmware file is supplied via CONFIG_EXTRA_FIRMWARE, the
build currently succeeds but creates an empty section. While the
firmware loader will not return such sections it is better to avoid
adding them in the first place.
Add a compile-time size check to the filechk_fwbin macro to abort the
build early if a 0-size firmware is encountered.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260426043041.649202-2-dmitry.torokhov@gmail.com
[ Use 'exit 1' to properly fail the build. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Currently, the builtin firmware loader allows 0-size firmware to be
returned successfully to drivers. This differs from all other loading
mechanisms (filesystem, sysfs fallback) which reject 0-byte files, and
forces drivers to add boilerplate size checks.
Modify firmware_request_builtin() to reject 0-size firmware. This will
also result in firmware loader falling back to other mechanisms if an
empty built-in firmware is present.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260426043041.649202-1-dmitry.torokhov@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The initcall_debug command line option is a useful tool while debugging
and optimizing the initialization of a new system, mainly because it
allows to see probe failures and deferrals without recompiling the
kernel (e.g., with CONFIG_DEBUG_DRIVER). However, matching a device
with the driver it is being probed with can become difficult, since
some devices use names that are not explicit, at least at a first sight
(e.g.: '1-0:1.0' or '1-0060').
Add the driver name alongside the device name, to allow for an immediate
match between the two.
Suggested-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Francesco Valla <francesco@valla.it>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260703-probe_driver-v2-1-b6060559f33b@valla.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When using platform_device_register_full(), we currently only increase
the reference count of the OF node associated with a platform device. We
symmetrically decrease it in platform_device_release(). With all users in
tree now converted to using provided platform device helpers for
assigning OF and firmware nodes, we can now switch to counting references
of all kinds of firmware nodes.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-20-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Users of platform_device_alloc() + platform_device_add() must not modify
certain fields of the dynamically created platform device object. Update
the kernel doc to say which fields are affected and which functions to
use.
Suggested-by: Manuel Ebner <manuelebner@mailbox.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-5-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Provide a platform-specific variant of device_set_of_node_from_dev(). In
addition to bumping the reference count of the OF node being assigned,
it also assigns the fwnode of the platform device.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-4-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Provide a helper function encapsulating the logic of assigning firmware
nodes to platform devices created with platform_device_alloc(). Make the
kerneldoc state that this is the proper interface for assigning firmware
nodes to dynamically allocated platform devices. This will allow us to
switch to counting the references of the device's firmware nodes in the
future, not only the OF nodes.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-3-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Encapsulate the reference counting logic for OF nodes assigned to
platform devices created with platform_device_alloc() in a helper
function. Make the kerneldoc state that this is the proper interface for
assigning OF nodes to dynamically allocated platform devices. This will
allow us to switch to counting the references of the device's firmware
nodes, not only the OF nodes.
Reviewed-by: Manuel Ebner <manuelebner@mailbox.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-2-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a runtime resume callback returns an error, rpm_callback() sets
power.runtime_error on the device. This causes all subsequent calls to
rpm_resume() to return -EINVAL immediately at the top of the function
without invoking the callback again, making the failure permanent until
runtime PM is explicitly re-initialized.
Unlike suspend failures, resume failures should be retryable. If a
device's resume callback fails, there is no reason to permanently block
future resume attempts on that device and all of its consumers.
Fix this by moving the power.runtime_error assignment out of the generic
rpm_callback() and into rpm_suspend() at its fail label, where suspend
callback failures are handled. Resume callback failures now return the
error to the caller but leave power.runtime_error clear, allowing the
next resume attempt to invoke the callback normally.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-fix_sticky_-einval_after_pm_runtime_api_failure-v3-1-92feb5a7b926@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove nested blocks in isa_bus_init(). This will make the module
easy-to-understand and make the code clearer.
Previous discussion regarding this change can be found
at below link:
https://lore.kernel.org/all/20260504063518.515620-1-wbg@kernel.org/
Acked-by: William Breathitt Gray <wbg@kernel.org>
Suggested-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/20260504063518.515620-1-wbg@kernel.org/
Link: https://patch.msgid.link/20260701205857.GA4113@syednwaris
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
|
|
The users which rely on regmap IRQ to create the IRQ chip may also
want to have an additional tracking of the IRQ requests and releases.
Provide a callback for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260702130903.1790633-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
numa_register_meminfo() sets node_possible_map to numa_nodes_parsed. The
later assignment in numa_register_nodes() is therefore redundant, so remove
it.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-9-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
numa_add_memblk() now sets the node in numa_nodes_parsed itself, so the
caller's own node_set() is redundant. Remove it.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260703041329.2797584-6-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Similar to the issue fixed in commit 542440fd7b30 ("regmap: maple: work
around gcc-14.1 false-positive warning"), I see an uninitialized warning
for upper_index and upper_last.
Happens with arc-linux-gnu-gcc (Debian 15.3.0-1) 15.3.0 on an
allmodconfig for ARCH=arc.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260626060427.2548578-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We do not check an error code from ->exit() callback, nor we ever
return one (it's always 0, meaning success). Make ->exit() callback
return void.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260618194036.3275202-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Kernel threads start in a completely isolated nullfs mount. Use
UNSHARE_EMPTY_MNTNS to give the devtmpfsd kthread a private empty mount
namespace with its root and pwd already set up, so it can mount its own
devtmpfs instance instead of unsharing a copy of the initial mount
namespace.
Link: https://patch.msgid.link/20260601-work-kthread-nullfs-v4-21-77ee053060e0@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
The comment wrongly references to /sys/modules directory instead of
/sys/module. Fix it.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260621075239.11330-1-zenghui.yu@linux.dev
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"Ensure that we don't overwrite the error code when cleaning up a
failed cache initialisation, helping people debug issues if they
do arise"
* tag 'regmap-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regcache: Do not overwrite error code when finalizing cache after error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Unsurprisingly, we've had a fairly busy development cycle with various
fixes and enhancements. While the majority of changes consist of
device-specific fixes, a significant number of cleanups, hardening,
and modernizations have been applied to the core frameworks as well.
Below are some highlights:
ALSA Core:
- Hardening, race condition, and UAF/leak fixes in the ALSA timer and
sequencer cores
- Widespread adoption of flexible array members across core
structures
- Integration of new simple refcount helper functions to simplify
code
ASoC Core:
- Introduction of a unified SoundWire enumeration helper to clean up
redundant device initialization across codecs
- Enhancements to SDCA support, including handling devices with
multiple functions of the same type and proper jack reporting masks
- Continued refactoring of ASoC component debugfs and DAPM structures
- Simplification and improvements to the format auto-selection
mechanism
- Added shared BCLK rate constraints for cross-DAI coordination
ASoC Platforms & Codecs:
- Initial bring-up and power management support for AMD ACP 7.x
- Support for Everest Semi ES9356 (SDCA), Mediatek MT2701 (on-chip
HDMI) and MT8196 SoCs, Renesas RZ/G3E, SpacemiT K3, and TI
TAC5xx2/TAS67524
- Added a new generic driver for GPIO-driven amplifiers
- Continued mass conversion of locking code to guard() helpers across
numerous platform drivers (MediaTek, Rockchip, STM32, Samsung, etc)
- Cleanup of legacy non-DT platform data and rollbacks for obsolete
SH Ecovec24/7724se boards
HD- and USB-Audio:
- Device-specific hardware quirks and fixes for various Realtek
HD-Audio devices (Lenovo, HP, ASUS, Acer, Clevo)
- Refinements to Qualcomm USB-audio offloading support
- Front-panel controls and autogain status support for Scarlett Gen 4
- Quirks for XIBERIA (K03S), Sennheiser (MOMENTUM 3), Edifier
(MF200), Novation (Mininova), and Behringer (Flow 8) USB-audio
devices
- Improved robustness by rolling back or propagating write errors to
the mixer control caches (Babyface Pro, US-16x08, Scarlett)
Others:
- Support for the HT-Omega eClaro PCI sound card in the Oxygen driver
- Robustness improvements and fixes for Virtio-audio, Xen-front, and
legacy OSS dmasound drivers"
* tag 'sound-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (483 commits)
ALSA: usb-audio: Add iface reset and delay quirk for XIBERIA K03S
ALSA: hda/realtek: Add quirk for Lenovo Xiaoxin 14 GT
ALSA: hda/realtek: Add CS35L41 I2C quirk for ASUS UM3405GA
ALSA: timer: Fix racy timeri->timer changes with rwlock
ALSA: core: Fix unintuitive behavior of snd_power_ref_and_wait()
ALSA: seq: avoid stale FIFO cells during resize
ALSA: seq: oss: Serialize readq reset state with q->lock
ASoC: dt-bindings: Fix RT5677 "realtek,gpio-config" type
ASoC: audio-graph-card2: recommend to use auto select DAI format
ASoC: update auto format selection method
ASoC: renesas: rcar: update auto select format
ASoC: codecs: pcm3168a: update auto select format
ASoC: codecs: ak4619: update auto select format
ASoC: codecs: peb2466: don't use array if single pattern
ASoC: codecs: idt821034: don't use array if single pattern
ASoC: codecs: framer-codec: don't use array if single pattern
ASoC: remove SND_SOC_POSSIBLE_xBx_xFx
ASoC: adau1372: Clear PLL_EN on failed PLL lock without reset GPIO
ALSA: seq: Don't re-bounce the error event
ASoC: bcm: cygnus: use scoped child node loop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
|
|
During regcache initialization, if an error occurs in the
cache_ops->populate callback, and if cache operations include an exit
callback, the error code from populate() is overwritten with the return
value from exit(). This hides the error condition from the caller of
regcache_init(), and can cause NULL pointer dereferences when the regcache
is later accessed.
Fixes: 94a3a95f0315 ("regcache: Add ->populate() callback to separate from ->init()")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20260616114429.1852456-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap update from Mark Brown:
"This time around we just have a single fix for a sparse warning"
* tag 'regmap-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-i2c: fix sparse warning in regmap_smbus_word_write_reg16
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"SMP load-balancing updates:
- A large series to introduce infrastructure for cache-aware load
balancing, with the goal of co-locating tasks that share data
within the same Last Level Cache (LLC) domain. By improving cache
locality, the scheduler can reduce cache bouncing and cache misses,
ultimately improving data access efficiency.
Implemented by Chen Yu and Tim Chen, based on early prototype work
by Peter Zijlstra, with fixes by Jianyong Wu, Peter Zijlstra and
Shrikanth Hegde.
- A series to simplify CONFIG_SCHED_SMT ifdef usage (Shrikanth Hegde)
Fair scheduler updates:
- A series to improve SD_ASYM_CPUCAPACITY scheduling by introducing
SMT awareness (Andrea Righi, K Prateek Nayak)
- A series to optimize cfs_rq and sched_entity allocation for better
data locality (Zecheng Li)
- A preparatory series to change fair/cgroup scheduling to a single
runqueue, without the final change (Peter Zijlstra)
- Auto-manage ext/fair dl_server bandwidth (Andrea Righi)
- Fix cpu_util runnable_avg arithmetic (Hongyan Xia)
- Optimize update_tg_load_avg()'s rate-limiting code (Rik van Riel)
- Allow account_cfs_rq_runtime() to throttle current hierarchy
(K Prateek Nayak)
- Update util_est after updating util_avg during dequeue, to fix the
util signal update logic, which reduces signal noise (Vincent
Guittot)
Scheduler topology updates:
- Allow multiple domains to claim sched_domain_shared (K Prateek
Nayak)
- Add parameter to split LLC (Peter Zijlstra)
Core scheduler updates:
- Use trace_call__<tp>() to save a static branch (Gabriele Monaco)
Scheduler statistics updates:
- Drop now-stale mul_u64_u64_div_u64() cputime over-approximation
guard (Nicolas Pitre)
Deadline scheduler updates:
- Reject debugfs dl_server writes for offline CPUs (Andrea Righi)
- Fix replenishment logic for non-deferred servers (Yuri Andriaccio)
RT scheduling updates:
- Turn RT_PUSH_IPI default off for non PREEMPT_RT (Steven Rostedt)
- Update default bandwidth for real-time tasks to 1.0 (Yuri
Andriaccio)
Proxy scheduling updates:
- A series to implement Optimized Donor Migration for Proxy Execution
(John Stultz, Peter Zijlstra)
- Various proxy scheduling cleanups and fixes (Peter Zijlstra,
K Prateek Nayak)
Misc fixes, improvements and cleanups by Aaron Lu, Andrea Righi,
Zenghui Yu, Chen Yu, Guanyou.Chen, John Stultz, Shrikanth Hegde,
Peter Zijlstra, Liang Luo and Yiyang Chen"
* tag 'sched-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (91 commits)
sched/fair: Fix newidle vs core-sched
sched/deadline: Use task_on_rq_migrating() helper
sched/core: Combine separate 'else' and 'if' statements
sched/fair: Fix cpu_util runnable_avg arithmetic
sched/fair: Unify cfs_rq throttling via account_cfs_rq_runtime()
sched/fair: Move the throttled tasks to a local list in tg_unthrottle_up()
sched/fair: Call update_curr() before unthrottling the hierarchy
sched/fair: Use throttled_csd_list for local unthrottle
sched/fair: Convert cfs bandwidth throttling to use guards
sched/fair: Allocate cfs_tg_state with percpu allocator
sched/fair: Remove task_group->se pointer array
sched/fair: Co-locate cfs_rq and sched_entity in cfs_tg_state
sched: restore timer_slack_ns when resetting RT policy on fork
MAINTAINERS: Fix spelling mistake in Peter's name
sched: Simplify ttwu_runnable()
sched/proxy: Remove superfluous clear_task_blocked_in()
sched/proxy: Remove PROXY_WAKING
sched/proxy: Switch proxy to use p->is_blocked
sched/proxy: Only return migrate when needed
sched: Be more strict about p->is_blocked
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
|
Merge updates related to system sleep support, two updates of the
intel_rapl power capping driver, and a pm-graph utility fix for
7.2-rc1:
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init() to
avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during hibernation
image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression (l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the intel_rapl
power capping driver and use sysfs_emit() in cpumask_show() in that
driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)
* pm-sleep:
PM: dpm_watchdog: Add sysctl interface for DPM watchdog timeouts
PM: hibernate: Use flexible array for CRC uncompressed buffers
PM: hibernate: make LZ4 available for hibernation compression
PM: sleep: Use complete() in device_pm_sleep_init()
PM: hibernate: call preallocate_image() after freeze prepare
* pm-powercap:
powercap: intel_rapl: Use sysfs_emit() in cpumask_show()
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
* pm-tools:
PM: tools: pm-graph: fix ValueError when parsing incomplete device properties
|
|
Introduce sysctl knobs to allow configuring DPM watchdog timeouts at
runtime.
Currently, these timeouts are fixed at compile time via
CONFIG_DPM_WATCHDOG_TIMEOUT and CONFIG_DPM_WATCHDOG_WARNING_TIMEOUT.
This limits flexibility if the timeouts need to be adjusted for
different testing scenarios or hardware behaviors without rebuilding
the kernel.
Add the following sysctl files under /proc/sys/kernel/:
- dpm_watchdog_timeout_secs: The total timeout before panic. The
maximum value is capped at CONFIG_DPM_WATCHDOG_TIMEOUT to prevent
unreasonably large timeouts.
- dpm_watchdog_warning_timeout_secs: The warning timeout. The maximum
value is capped at the current dpm_watchdog_timeout_secs.
Both sysctls have a minimum value of 1.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260608021526.1023248-4-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pass KBUILD_MODNAME through the driver registration macro so that the
driver core can create the module symlink in sysfs for built-in drivers,
and fixup all callers.
The Rust platform adapter is updated to pass the module name through to
the new parameter.
Tested on qemu with:
- x86 defconfig + CONFIG_RUST
- arm64 defconfig + CONFIG_RUST + CONFIG_CORESIGHT stuff
Examples after this patch:
/sys/bus/platform/drivers/...
coresight-itnoc/module -> coresight_tnoc
coresight-static-tpdm/module -> coresight_tpdm
coresight-catu-platform/module -> coresight_catu
serial8250/module -> 8250
acpi-ged/module -> acpi
vmclock/module -> ptp_vmclock
Co-developed-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Link: https://patch.msgid.link/20260518-acpi_mod_name-v5-4-705ccc430885@sony.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
A recursive locking deadlock can occur in the firmware loader's power
management notification handler.
During system suspend or hibernation preparation, fw_pm_notify() calls
device_cache_fw_images(). This function acquires fw_lock to set the
firmware cache state to FW_LOADER_START_CACHE and then iterates over all
devices using dpm_for_each_dev() while still holding the lock.
For each device, dev_cache_fw_image() schedules asynchronous work to cache
the firmware. If memory allocation for the async work entry fails (e.g., in
out-of-memory conditions), async_schedule_node_domain() falls back to
executing the work function synchronously in the current thread.
The synchronous execution path (__async_dev_cache_fw_image() ->
cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire
fw_lock again. Since the current thread already holds fw_lock, this results
in a recursive locking deadlock.
Fix this by releasing fw_lock immediately after updating the cache state
and before calling dpm_for_each_dev(). The lock is only needed to protect
the state update. Concurrent firmware requests will correctly see the
FW_LOADER_START_CACHE state and use the piggyback mechanism, which is
independently protected by its own fwc->name_lock.
Fixes: ac39b3ea73aa ("firmware loader: let caching firmware piggyback on loading firmware")
Assisted-by: Gemini:gemini-3.1-pro-preview Gemini:gemini-3-flash-preview syzbot
Reported-by: syzbot+e70e4c6f6eee43357ba7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e70e4c6f6eee43357ba7
Link: https://syzkaller.appspot.com/ai_job?id=8b4af9fd-24af-423f-8acb-1159fd34c1a5
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/48b092a5-f49d-48a4-95f4-f65bebfc6bc3@mail.kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If __add_memory_block() fails at xa_store() (under memory pressure for
example), device_unregister() is called, which eventually triggers
memory_block_release() with mem->altmap still set, causing a
WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver.
Fix this by delaying the assignment of mem->altmap until after
__add_memory_block() has succeeded.
Link: https://lore.kernel.org/20260514092657.3057141-1-georgi.djakov@oss.qualcomm.com
Fixes: 1a8c64e11043 ("mm/memory_hotplug: embed vmem_altmap details in memory block")
Signed-off-by: Georgi Djakov <georgi.djakov@oss.qualcomm.com>
Acked-by: Oscar Salvador (SUSE) <osalvador@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Richard Cheng <icheng@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Georgi Djakov <djakov@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rename the memory block lookup helper to make the acquired reference
explicit, add memory_block_put() to wrap put_device(), remove
find_memory_block(), and use memory_block_get() as the single block-id
based lookup interface.
This makes it clearer to callers that a successful lookup holds a
reference that must be dropped, reducing the chance of forgetting the
matching put and leaking the memory block device reference.
Link: https://lore.kernel.org/linux-mm/7887915D-E598-42B3-9AFE-BFFBACE8DE2D@linux.dev/#t
Link: https://lore.kernel.org/20260512072635.3969576-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com> #s390
Cc: Richard Cheng <icheng@nvidia.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 835de37603ef ("meminfo: add a per node counter for balloon
drivers") added NR_BALLOON_PAGES and exposed it in /proc/meminfo.
However, the per-node view at /sys/devices/system/node/nodeX/meminfo was
not updated, even though the counter is already tracked per-node.
Add it to node_read_meminfo() so users can see balloon usage per NUMA node
without having to parse the raw vmstat file.
Link: https://lore.kernel.org/20260509005631.17183-1-hao.ge@linux.dev
Signed-off-by: Hao Ge <hao.ge@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 1137838865bf ("driver core: Use mod_delayed_work to prevent lost
deferred probe work") added a use of system_wq, which is deprecated in
favor of system_percpu_wq added by commit 128ea9f6ccfb ("workqueue: Add
system_percpu_wq and system_dfl_wq"). An upcoming warning in the
workqueue tree flags this with:
workqueue: work func deferred_probe_timeout_work_func enqueued on deprecated workqueue. Use system_{percpu|dfl}_wq instead.
Switch to system_percpu_wq to clear up the warning.
Fixes: 1137838865bf ("driver core: Use mod_delayed_work to prevent lost deferred probe work")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260601-driver-core-fix-system_wq-warning-v1-1-f9001a70ee25@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
All buses have been converted from driver_set_override() to the generic
driver_override infrastructure introduced in commit cb3d1049f4ea
("driver core: generalize driver_override in struct device").
Buses now either opt into the generic sysfs callbacks via the
bus_type::driver_override flag, or use device_set_driver_override() /
__device_set_driver_override() directly.
Thus, remove the now-unused driver_set_override() helper.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260505133935.3772495-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
drivers"
Danilo Krummrich <dakr@kernel.org> says:
Currently, Rust device drivers access device resources such as PCI BAR mappings
and I/O memory regions through Devres<T>.
Devres::access() provides zero-overhead access by taking a &Device<Bound>
reference as proof that the device is still bound. Since a &Device<Bound> is
available in almost all contexts by design, Devres is mostly a type-system level
proof that the resource is valid, but it can also be used from scopes without
this guarantee through its try_access() accessor.
This works well in general, but has a few limitations:
- Every access to a device resource goes through Devres::access(), which
despite zero cost, adds boilerplate to every access site.
- Destructors do not receive a &Device<Bound>, so they must use try_access(),
which can fail. In practice the access succeeds if teardown ordering is
correct, but the type system can't express this, forcing drivers to handle a
failure path that should never be taken.
- Sharing a resource across components (e.g. passing a BAR to a sub-component)
requires Arc<Devres<T>>.
- Device references must be stored as ARef<Device> rather than plain &Device
borrows.
These limitations stem from the driver's bus device private data being 'static
-- the driver struct cannot borrow from the device reference it receives in
probe(), even though it structurally cannot outlive the device binding.
This series introduces Higher-Ranked Lifetime Types (HRT) for Rust device
drivers. An HRT is a type that is generic over a lifetime -- it does not have a
fixed lifetime, but can be instantiated with any lifetime chosen by the caller.
Bus driver traits use a Generic Associated Type (GAT) type Data<'bound> to
introduce the lifetime on the private data, rather than parameterizing the
Driver trait itself. This avoids a driver trait global lifetime and avoids the
need for ForLt for bus device private data, making the bus implementations much
simpler. ForLt is only needed for auxiliary registration data, where the
lifetime is not introduced by a trait callback but must be threaded through
Registration.
With HRT, driver structs carry a lifetime parameter tied to the device binding
scope -- the interval of a bus device being bound to a driver. Device resources
like pci::Bar<'bound> and IoMem<'bound> are handed out with this lifetime, so
the compiler enforces at build time that they do not escape the binding scope.
Before:
struct MyDriver {
pdev: ARef<pci::Device>,
bar: Devres<pci::Bar<BAR_SIZE>>,
}
let io = self.bar.access(dev)?;
io.read32(OFFSET);
After:
struct MyDriver<'bound> {
pdev: &'bound pci::Device,
bar: pci::Bar<'bound, BAR_SIZE>,
}
self.bar.read32(OFFSET);
Lifetime-parameterized device resources can be put into a Devres at any point
via Bar::into_devres() / IoMem::into_devres(), providing the exact same
semantics as before. This is useful for resources shared across subsystem
boundaries where revocation is needed.
This also synergizes with the upcoming self-referential initialization support
in pin-init, which allows one field of the driver struct to borrow another
during initialization without unsafe code.
The same pattern is applied to auxiliary device registration data as a first
example beyond bus device private data. Registration<F: ForLt> can hold
lifetime-parameterized data tied to the parent driver's binding scope. Since the
auxiliary bus guarantees that the parent remains bound while the auxiliary
device is registered, the registration data can safely borrow the parent's
device resources.
More generally, binding resource lifetimes to a registration scope applies to
every registration that is scoped to a driver binding -- auxiliary devices,
class devices, IRQ handlers, workqueues.
A follow-up series extends this to class device registrations, starting with
DRM, so that class device callbacks (IOCTLs, etc.) can safely access device
resources through the separate registration data bound to the registration's
lifetime without Devres indirection.
Thanks to Gary for coming up with the ForLt implementation; thanks to Alice for
the early discussions around lifetime-parameterized private data that helped
shape the direction of this work.
Link: https://patch.msgid.link/20260525202921.124698-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Prevent _regmap_update_bits() from accessing hardware when the register
map is in cache-only mode.
Unlike regmap_raw_read() and _regmap_read(), the volatile
_regmap_update_bits() fast path bypasses the cache_only check. This can
result in unexpected hardware accesses while the device is suspended.
Return -EBUSY to ensure behavior is consistent with other cache-only
access paths.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260528053204.46783-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move the post_unbind_rust callback before devres_release_all() in
device_unbind_cleanup().
With drvdata() removed, the driver's bus device private data is only
accessible by the owning driver itself. It is hence safe to drop the
driver's bus device private data before devres actions are released.
This reordering is the key enabler for Higher-Ranked Lifetime Types
(HRT) in Rust device drivers -- it allows driver structs to hold direct
references to devres-managed resources, because the bus device private
data (and with it all such references) is guaranteed to be dropped while
the underlying devres resources are still alive.
Without this change, devres resources would be freed first, leaving the
driver's bus device private data with dangling references during its
destructor.
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260525202921.124698-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
mod_delayed_work() unconditionally queues the work even when it wasn't
previously pending, which can fire the timeout prematurely or restart it
after it already fired. Add a delayed_work_pending() guard to restore
the originally intended semantics.
Premature firing calls fw_devlink_drivers_done() before all built-in
drivers have registered, causing fw_devlink to prematurely relax device
links for suppliers whose drivers haven't loaded yet.
Fixes: 1137838865bf ("driver core: Use mod_delayed_work to prevent lost deferred probe work")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260525012340.3860581-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
mod_delayed_work() takes jiffies, not seconds. Thus, restore the dropped
conversion.
While at it, fix incorrect indentation.
Fixes: 1137838865bf ("driver core: Use mod_delayed_work to prevent lost deferred probe work")
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260525012340.3860581-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Replace complete_all() with complete() in device_pm_sleep_init() to allow
it to be called in atomic contexts without triggering a false-positive
WARNING from lockdep_assert_RT_in_threaded_ctx() when
CONFIG_PROVE_RAW_LOCK_NESTING is enabled.
device_pm_sleep_init() may be called during device initialization while
holding a raw_spinlock (e.g., from within device_initialize()), and
complete_all() is unsafe in atomic contexts on PREEMPT_RT kernels.
complete(), which is safe to call from any context, is sufficient here.
complete_all() sets the completion count to UINT_MAX/2 (permanently
signaled), while complete() increments it by 1. Since no threads can be
waiting during device initialization, both are functionally equivalent.
The completion is always reinitialized via reinit_completion() in
dpm_clear_async_state() before each suspend/resume cycle.
However, changing to complete() introduces a potential deadlock for
devices with no PM support (dev->power.no_pm = true). Such devices are
never added to the dpm_list and never go through dpm_clear_async_state(),
so their completion is never reinitialized. A parent device waiting on a
no_pm child across multiple suspend phases would consume the single-use
token in the first phase and block forever in the second.
Fix this by adding an early return in dpm_wait() when dev->power.no_pm is
set, since no_pm devices do not participate in system suspend/resume.
Fixes: 152e1d592071 ("PM: Prevent waiting forever on asynchronous resume after failing suspend")
Signed-off-by: Jiakai Xu <xujiakai24@mails.ucas.ac.cn>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20260523022314.2657232-1-xujiakai24@mails.ucas.ac.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Remove the software node on platform device release(); without this,
the software node remains registered after the device is gone and a
subsequent platform_device_register_full() reusing the same node
fails with -EBUSY
- In sysfs_update_group(), do not remove a pre-existing directory when
create_files() fails; the previous code would silently destroy a
sysfs group that the caller did not create
- Set fwnode->secondary to NULL in fwnode_init() to avoid dereferencing
uninitialized memory (e.g. in dev_to_swnode()) when the firmware node
is allocated on the stack or via a non-zeroing allocator
* tag 'driver-core-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
device property: set fwnode->secondary to NULL in fwnode_init()
sysfs: don't remove existing directory on update failure
driver core: platform: remove software node on release()
|
|
To make sure these attributes are not modified by accident or by an
attacker, move them to read-only memory.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260512-sysfs-const-attr-device_attr-prep-v3-5-cb7c17b34d52@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow device attribute to reside in read-only memory.
Both const and non-const attributes are handled by the utility macros
and attributes can be migrated one-by-one.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260512-sysfs-const-attr-device_attr-prep-v3-4-cb7c17b34d52@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
