| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
FEAT_SPE_FnE is architecturally detected via PMSIDR_EL1.FnE [6], not
ID_AA64DFR0_EL1.PMSVer. The FEAT_X macro form (register, field, value)
cannot encode a PMSIDR_EL1-based feature, so FEAT_SPE_FnE was defined
identically to FEAT_SPEv1p2 (ID_AA64DFR0_EL1, PMSVer, V1P2), producing
a duplicate that used PMSVer >= V1P2 as a proxy.
Replace the macro with feat_spe_fne(), following the same pattern as
the sibling feat_spe_fds(): guard on FEAT_SPEv1p2 and read
PMSIDR_EL1.FnE [6] directly. Wire the two NEEDS_FEAT consumers to use
the new function.
Remove the now-unused FEAT_SPE_FnE macro.
Fixes: 63d423a7635b ("KVM: arm64: Switch to table-driven FGU configuration")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260424084908.370776-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|
|
Revists -> Revisit. The following patch will add another similar line.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260424084908.370776-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
FEAT_Debugv8p9 is incorrectly defined against ID_AA64DFR0_EL1.PMUVer
instead of ID_AA64DFR0_EL1.DebugVer. All three consumers of the macro
gate features that are architecturally tied to FEAT_Debugv8p9
(DebugVer = 0b1011, DDI0487 M.b A2.2.10):
- HDFGRTR2_EL2.nMDSELR_EL1, HDFGWTR2_EL2.nMDSELR_EL1: MDSELR_EL1
is present only when FEAT_Debugv8p9 is implemented (D24.3.21).
- MDCR_EL2.EBWE: the Extended Breakpoint and Watchpoint Enable bit
is RES0 unless FEAT_Debugv8p9 is implemented (D24.3.17).
Neither register has any dependency on PMUVer.
FEAT_Debugv8p9 and FEAT_PMUv3p9 are independent. Per DDI0487 M.b
A2.2.10, FEAT_Debugv8p9 is unconditionally mandatory from Armv8.9,
whereas FEAT_PMUv3p9 is mandatory only when FEAT_PMUv3 is implemented.
An Armv8.9 CPU without a PMU has DebugVer = 0b1011 but PMUVer = 0b0000,
so the wrong field check would cause KVM to incorrectly treat EBWE and
MDSELR_EL1 as RES0 on such hardware.
Fixes: 4bc0fe089840 ("KVM: arm64: Add sanitisation for FEAT_FGT2 registers")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260424084908.370776-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|
|
Prevent the propagation of a function-id that has the top bits set since
this is not compliant with the SMCCC spec and can overlap with the
already known function-id decoders. (eg. if we invoke an smc with
0xffffffffc4000012 it will be decoded as a PSCI reset call). Instead,
make it clear that we don't support it and return an error.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://patch.msgid.link/20260408114118.422604-1-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The uaccess write handlers for GICD_IIDR in both GICv2 and GICv3
extract the revision field from 'reg' (the current IIDR value read back
from the emulated distributor) instead of 'val' (the value userspace is
trying to write). This means userspace can never actually change the
implementation revision — the extracted value is always the current one.
Fix the FIELD_GET to use 'val' so that userspace can select a different
revision for migration compatibility.
Fixes: 49a1a2c70a7f ("KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revision")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://patch.msgid.link/20260407210949.2076251-2-dwmw2@infradead.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|
|
Pull Xtensa updates from Max Filippov:
- use register_sys_off_handler(SYS_OFF_MODE_RESTART) instead of
the deprecated register_restart_handler()
- drop custom ucontext.h and reuse asm-generic ucontext.h
* tag 'xtensa-20260422' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: uapi: Reuse asm-generic ucontext.h
xtensa: xtfpga: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
xtensa: xt2000: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
xtensa: ISS: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
|
|
The ultra was written by Donald Becker 1993 to 1998. It is an ISA
device, so unlikely to be used with modern kernels.
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422-v7-0-0-net-next-driver-removal-v1-v2-14-08a5b59784d5@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ax88190 was written by David A. Hinds in 2001. It is an PCMCIA
device, so unlikely to be used with modern kernels.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422-v7-0-0-net-next-driver-removal-v1-v2-12-08a5b59784d5@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fmvj18x was written by Shingo Fujimoto in 2002. It is an PCMCIA
device, so unlikely to be used with modern kernels.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422-v7-0-0-net-next-driver-removal-v1-v2-11-08a5b59784d5@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The smc91c92 was written by David A Hinds in 1999. It is an PCMCIA
device, so unlikely to be used with modern kernels.
Remove the Documentation as well, since it refers to kernel versions
1.2.13 until 1.3.71 and FTP sites which no longer exist.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422-v7-0-0-net-next-driver-removal-v1-v2-8-08a5b59784d5@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The smc9194 was written by Erik Stahlman in 1996. It is an ISA device,
so unlikely to be used with modern kernels.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422-v7-0-0-net-next-driver-removal-v1-v2-7-08a5b59784d5@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The nmclan was written by Roger C Pao in 1995. It is an PCMCIA device,
so unlikely to be used with modern kernels.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422-v7-0-0-net-next-driver-removal-v1-v2-6-08a5b59784d5@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 3c589 was written by David A. Hinds 2001. It is an PCMCIA device,
so unlikely to be used with modern kernels.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422-v7-0-0-net-next-driver-removal-v1-v2-4-08a5b59784d5@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 3c574 was written by Donald Becker between 1993-1998. It is
an PCMCIA device, so unlikely to be used with modern kernels.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422-v7-0-0-net-next-driver-removal-v1-v2-3-08a5b59784d5@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 3c509 was written by Donald Becker between 1993-2000. It is an ISA
device, so unlikely to be used with modern kernels.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422-v7-0-0-net-next-driver-removal-v1-v2-1-08a5b59784d5@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to the hamachi driver, the yellowfin driver supports hardware
that is over two decades old and no longer in active use.
Since yellowfin was the last remaining driver in the packetengines
vendor directory, we can now safely remove the entire directory and
drop its associated references from the parent Kconfig and Makefile.
This eliminates dead code and reduces the overall maintenance burden
on the netdev subsystem.
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422044820.485660-3-25181214217@stu.xidian.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PacketEngine Hamachi driver is for PCI hardware that has been
obsolete for over two decades. It recently triggered arithmetic
exceptions during automated fuzzing.
As suggested by maintainers, remove the driver entirely to eliminate
dead code and reduce the maintenance burden.
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260422044820.485660-2-25181214217@stu.xidian.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the ATM protocol modules and PCI/SBUS ATM device drivers
that are no longer in active use.
The ATM core protocol stack, PPPoATM, BR2684, and USB DSL modem
drivers (drivers/usb/atm/) are retained in-tree to maintain PPP
over ATM (PPPoA) and PPPoE-over-BR2684 support for DSL connections.
The Solos ADSL2+ PCI driver is also retained.
Removed ATM protocol modules:
- net/atm/clip.c - Classical IP over ATM (RFC 2225)
- net/atm/lec.c - LAN Emulation Client (LANE)
- net/atm/mpc.c, mpoa_caches.c, mpoa_proc.c - Multi-Protocol Over ATM
Removed PCI/SBUS ATM device drivers (drivers/atm/):
- adummy, atmtcp - software/testing ATM devices
- eni - Efficient Networks ENI155P (OC-3, ~1995)
- fore200e - FORE Systems 200E PCI/SBUS (OC-3, ~1999)
- he - ForeRunner HE (OC-3/OC-12, ~2000)
- idt77105 - IDT 77105 25 Mbps ATM PHY
- idt77252 - IDT 77252 NICStAR II (OC-3, ~2000)
- iphase - Interphase ATM PCI (OC-3/DS3/E3)
- lanai - Efficient Networks Speedstream 3010
- nicstar - IDT 77201 NICStAR (155/25 Mbps, ~1999)
- suni - PMC S/UNI SONET PHY library
Also clean up references in:
- net/bridge/ - remove ATM LANE hook (br_fdb_test_addr_hook,
br_fdb_test_addr)
- net/core/dev.c - remove br_fdb_test_addr_hook export
- defconfig files - remove ATM driver config options
The removed code is moved to an out-of-tree module package (mod-orphan).
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260422041846.2035118-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull PCMCIA updates from Dominik Brodowski:
"A number of minor PCMCIA bugfixes and cleanups, and a patch removing
obsolete host controller drivers"
* tag 'pcmcia-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: remove obsolete host controller drivers
pcmcia: Convert to use less arguments in pci_bus_for_each_resource()
PCMCIA: Fix garbled log messages for KERN_CONT
|
|
Remove the amateur radio (AX.25, NET/ROM, ROSE) protocol implementation
and all associated hamradio device drivers from the kernel tree.
This set of protocols has long been a huge bug/syzbot magnet,
and since nobody stepped up to help us deal with the influx
of the AI-generated bug reports we need to move it out of tree
to protect our sanity.
The code is moved to an out-of-tree repo:
https://github.com/linux-netdev/mod-orphan
if it's cleaned up and reworked there we can accept it back.
Minimal stub headers are kept for include/net/ax25.h (AX25_P_IP,
AX25_ADDR_LEN, ax25_address) and include/net/rose.h (ROSE_ADDR_LEN)
so that the conditional integration code in arp.c and tun.c continues
to compile and work when the out-of-tree modules are loaded.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260421021824.1293976-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove CAIF (Communication CPU to Application CPU Interface), the
ST-Ericsson modem protocol. The subsystem has been orphaned since 2013.
The last meaningful changes from the maintainers were in March 2013:
a8c7687bf216 ("caif_virtio: Check that vringh_config is not null")
b2273be8d2df ("caif_virtio: Use vringh_notify_enable correctly")
0d2e1a2926b1 ("caif_virtio: Introduce caif over virtio")
Not-so-coincidentally, according to "the Internet" ST-Ericsson officially
shut down its modem joint venture in Aug 2013.
If anyone is using this code please yell!
In the 13 years since, the code has accumulated 200 non-merge commits,
of which 71 were cross-tree API changes, 21 carried Fixes: tags, and
the remaining ~110 were cleanups, doc conversions, treewide refactors,
and one partial removal (caif_hsi, ca75bcf0a83b).
We are still getting fixes to this code, in the last 10 days there were
3 reports on security@ about CAIF that I have been CCed on.
UAPI constants (AF_CAIF, ARPHRD_CAIF, N_CAIF, VIRTIO_ID_CAIF) and the
SELinux classmap entry are intentionally kept for ABI stability.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260416182829.1440262-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC updates from Arnd Bergmann:
"These are the contents that arrived during the easter vacation and
didn't make it into the last 7.0 bugfixes or the first set of branches
for the merge window. Aside from a reset controller bugfix and an
update to the MAINTAINERS entry, this is all devicetree changes.
The Marvell devicetree updates contain the usual minor updates and
bugfixes, along with a two larger but trivial patches to drop unused
dtsi files, the single broadcom fix addresses a build time warning
introduced during the merge window.
The freescale, amlogic, and apple changes missed the last fixes branch
for 7.0"
* tag 'soc-late-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number
arm64: dts: amlogic: meson-axg: Add missing cache information to cpu0
arm64: dts: amlogic: t7: khadas-vim4: fix board model name
arm64: dts: amlogic: Fix GIC register ranges for Amlogic T7
arm64: dts: amlogic: t7: khadas-vim4: fix memory layout for 8GB RAM
arm64: dts: amlogic: s6: Drop CPU masks from GICv3 PPI interrupts
Documentation/process: maintainer-soc: Document purpose of defconfigs
Documentation/process: maintainer-soc: Trim from trivial ask-DT
ARM: dts: bcm4709: fix bus range assignment
arm64: dts: apple: Fix spelling error
dt-bindings: Update Sasha Finkelstein's email address
mailmap: Update Sasha Finkelstein's email address
arm64: dts: marvell: armada-37xx: swap PHYs' order in USB3 controller node
arm64: dts: marvell: armada-37xx: use 'usb2-phy' in USB3 controller's phy-names
arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT
reset: amlogic: t7: Fix null reset ops
arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/late2
Amlogic DT Fixes for v7.1:
- Fix ethernet PHY interrupt number for P230 reference board
- Add missing cache information to cpu0 for Amlogic AXG
- Fix Khadas VIM4 board model name
- Fix GIC register ranges for Amlogic T7
- Fix Khadas VIM4 memory layout for 8GB RAM
- Drop CPU masks from GICv3 PPI interrupts for Amlogic S6
* tag 'amlogic-fixes-v7.1-rc' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number
arm64: dts: amlogic: meson-axg: Add missing cache information to cpu0
arm64: dts: amlogic: t7: khadas-vim4: fix board model name
arm64: dts: amlogic: Fix GIC register ranges for Amlogic T7
arm64: dts: amlogic: t7: khadas-vim4: fix memory layout for 8GB RAM
arm64: dts: amlogic: s6: Drop CPU masks from GICv3 PPI interrupts
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Implement BPF_TRACE_FSESSION support in LoongArch BPF JIT. The logic
here is almost identical to what has been done in RISC-V JIT.
The key changes are:
- Allocate stack space for function meta and session cookies
- Introduce invoke_bpf() as a wrapper around invoke_bpf_prog() that
populates session cookies before each invocation
- Implement bpf_jit_supports_fsession() callback
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Introduce a helper to store 64-bit immediate on the trampoline stack.
The helper will be used in the next patch. Also refactor the existing
code to use this helper.
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb update from Daniel Thompson:
"Only a very small update for kgdb this cycle: a single patch from
Kexin Sun that fixes some outdated comments"
* tag 'kgdb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: update outdated references to kgdb_wait()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for CONFIG_PAGE_TABLE_CHECK and enable it in
debug_defconfig. s390 can only tell user from kernel PTEs via the mm,
so mm_struct is now passed into pxx_user_accessible_page() callbacks
- Expose the PCI function UID as an arch-specific slot attribute in
sysfs so a function can be identified by its user-defined id while
still in standby. Introduces a generic ARCH_PCI_SLOT_GROUPS hook in
drivers/pci/slot.c
- Refresh s390 PCI documentation to reflect current behavior and cover
previously undocumented sysfs attributes
- zcrypt device driver cleanup series: consistent field types, clearer
variable naming, a kernel-doc warning fix, and a comment explaining
the intentional synchronize_rcu() in pkey_handler_register()
- Provide an s390 arch_raw_cpu_ptr() that avoids the detour via
get_lowcore() using alternatives, shrinking defconfig by ~27 kB
- Guard identity-base randomization with kaslr_enabled() so nokaslr
keeps the identity mapping at 0 even with RANDOMIZE_IDENTITY_BASE=y
- Build S390_MODULES_SANITY_TEST as a module only by requiring KUNIT &&
m, since built-in would not exercise module loading
- Remove the permanently commented-out HMCDRV_DEV_CLASS create_class()
code in the hmcdrv driver
- Drop stale ident_map_size extern conflicting with asm/page.h
* tag 's390-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix warning about wrong kernel doc comment
PCI: s390: Expose the UID as an arch specific PCI slot attribute
docs: s390/pci: Improve and update PCI documentation
s390/pkey: Add comment about synchronize_rcu() to pkey base
s390/hmcdrv: Remove commented out code
s390/zcrypt: Slight rework on the agent_id field
s390/zcrypt: Explicitly use a card variable in _zcrypt_send_cprb
s390/zcrypt: Rework MKVP fields and handling
s390/zcrypt: Make apfs a real unsigned int field
s390/zcrypt: Rework domain processing within zcrypt device driver
s390/zcrypt: Move inline function rng_type6cprb_msgx from header to code
s390/percpu: Provide arch_raw_cpu_ptr()
s390: Enable page table check for debug_defconfig
s390/pgtable: Add s390 support for page table check
s390/pgtable: Use set_pmd_bit() to invalidate PMD entry
mm/page_table_check: Pass mm_struct to pxx_user_accessible_page()
s390/boot: Respect kaslr_enabled() for identity randomization
s390/Kconfig: Make modules sanity test a module-only option
s390/setup: Drop stale ident_map_size declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Fix cross-compilation for hv tools (Aditya Garg)
- Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)
- Limit channel interrupt scan to relid high water mark (Michael
Kelley)
- Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)
- Fix cleanup and shutdown issues for MSHV (Jork Loeser)
- Introduce more tracing support for MSHV (Stanislav Kinsburskii)
* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Skip LP/VP creation on kexec
x86/hyperv: move stimer cleanup to hv_machine_shutdown()
Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
mshv: Add tracepoint for GPA intercept handling
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
tools: hv: Fix cross-compilation
Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
mshv: Introduce tracing support
Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
|
|
Currently, LoongArch bpf trampoline supports up to 8 function arguments.
According to the statistics from commit 473e3150e30a ("bpf, x86: allow
function arguments up to 12 for TRACING"), there are over 200 functions
accept 9 to 12 arguments, so add 12 arguments support for trampoline.
With this patch, the following related testcases passed:
sudo ./test_progs -a tracing_struct/struct_many_args
sudo ./test_progs -a fentry_test/fentry_many_args
sudo ./test_progs -a fexit_test/fexit_many_args
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In the current BPF code, the struct argument size is at most 16 bytes,
enforced by the verifier. According to the Procedure Call Standard for
LoongArch, the struct argument size below 16 bytes are provided as part
of the 8 argument registers, that is to say, the struct argument may be
passed in a pair of registers if its size is more than 8 bytes and no
more than 16 bytes.
Extend the BPF trampoline JIT to support attachment to functions that
take small structures (up to 16 bytes) as argument, save and restore a
number of "argument registers" rather than a number of arguments.
With this patch, the following related testcases passed:
sudo ./test_progs -a tracing_struct/struct_args
sudo ./test_progs -a tracing_struct/union_args
Link: https://github.com/loongson/la-abi-specs/blob/release/lapcs.adoc#structures
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
invoke_bpf_mod_ret() is a small wrapper over invoke_bpf_prog(), it
should check the return value of invoke_bpf_prog() and then return
immediately if invoke_bpf_prog() failed, just open code and remove
it due to it is called only once.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Use the LoongArch common memory access instructions with the barrier
'dbar' to support the BPF load-acquire and store-release instructions.
With this patch, the following testcases passed on LoongArch if the
macro CAN_USE_LOAD_ACQ_STORE_REL is usable in bpf selftests:
sudo ./test_progs -t verifier_load_acquire
sudo ./test_progs -t verifier_store_release
sudo ./test_progs -t verifier_precision/bpf_load_acquire
sudo ./test_progs -t verifier_precision/bpf_store_release
sudo ./test_progs -t compute_live_registers/atomic_load_acq_store_rel
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The 8 and 16 bit read-modify-write instructions {amadd/amswap}.{b/h}
were newly added in the latest LoongArch Reference Manual, use them to
avoid the error of unknown opcode if possible.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like the other archs such as x86 and riscv, add the default case
in emit_atomic() to print an error message for the invalid opcode
and return -EINVAL, then make its return type as int.
While at it, given that all of the instructions in emit_atomic()
are only read-modify-write instructions, rename emit_atomic() to
emit_atomic_rmw() to make it clear, because there will be a new
function emit_atomic_ld_st() for load-acquire and store-release
instructions in the later patch.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The 8 and 16 bit read-modify-write atomic instructions amadd.{b/h} and
amswap.{b/h} were newly added in the latest LoongArch Reference Manual,
define the instruction format and check whether support via CPUCFG.
Furthermore, define the instruction format for DBAR which will be used
to support BPF load-acquire and store-release instructions.
This is preparation for later patches.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Switch to the batched version of the jump label update functions so
instruction cache maintenance is deferred until the end of the update.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch maintains ICache/DCache coherency by hardware, so we just need
"ibar 0" to avoid instruction hazard here.
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The LoongArch syscall number is directly controlled by userspace, but
does not have a array_index_nospec() boundry to prevent access past the
syscall function pointer tables.
Cc: stable@vger.kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Most LoongArch processors are vulnerable to Spectre-V1 Proof-of-Concept
(PoC). And the generic mechanism, __user pointer sanitization, can be
used as a mitigation. This means to use array_index_nospec() to prevent
out of boundry access in syscall and other critical paths.
Implement the arch-specific cpu_show_spectre_v1() to show CPU Spectre-V1
vulnerabilites correctly.
Cc: stable@vger.kernel.org
Link: https://cc-sw.com/chinese-loongarch-architecture-evaluation-part-3-of-3/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After commit 7c405fb3279b3924 ("rcu: Use an intermediate irq_work to
start process_srcu()"), Loongson-2K0300/2K0500 fail to boot. Because
IRQ_WORK need IPI but Loongson-2K0300/2K0500 don't have IPI HW.
So make arch_irq_work_has_interrupt() return true only if IPI HW exist.
Cc: stable@vger.kernel.org
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like others, replace the custom stack canary initialization with the
get_random_canary() helper, following the pattern established in commit
622754e84b10 ("stackprotector: actually use get_random_canary()").
Signed-off-by: Luo Qiu <luoqiu@kylinsec.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Whether KASLR is disabled is not handled in nokaslr() which is the early
param "nokaslr" setup function, but in kaslr_disabled(). However, the
logging was previously done in nokaslr() and lack detail. So we move the
logging to the right place and add more specific infomation about why it
is disabled.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuqian Yang <yangyuqian@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Move fpr to the beginning of struct loongarch_fpu so it is naturally
aligned to FPU_ALIGN (32 bytes), improving 256-bit SIMD (LASX) context
switch performance.
Also adjust process.c and fpu.S to work well with the new loongarch_fpu
layout.
Signed-off-by: Lisa Robinson <lisa@bytefly.space>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
If CONFIG_32BIT is set, it should return AUDIT_ARCH_LOONGARCH32 instead
of AUDIT_ARCH_LOONGARCH64 in syscall_get_arch().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add HIGHMEM (High Memory) support for LoongArch, mostly needed by 32BIT
kernel because the size of kernel virtual memory space is only 512MB and
the size of usable physical memory is only 256MB in this case.
HIGHMEM adds permanent kernel mapping (PKMAP) and fixed kernel mapping
(FIX_KMAP), which increase usable physical memory up to 2.25GB (2304MB).
We can just use the generic copy_user_highpage(), so remove the custom
version.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Adjust build infrastructure (Kconfig, Makefile and ld scripts) to let
us enable both 32BIT/64BIT kernel build.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After a kexec the logical processors and virtual processors already
exist in the hypervisor because they were created by the previous
kernel. Attempting to add them again causes either a BUG_ON or
corrupted VP state leading to MCEs in the new kernel.
Add hv_lp_exists() to probe whether an LP is already present by
calling HVCALL_GET_LOGICAL_PROCESSOR_RUN_TIME. When it succeeds the
LP exists and we skip the add-LP and create-VP loops entirely.
Also add hv_call_notify_all_processors_started() which informs the
hypervisor that all processors are online. This is required after
adding LPs (fresh boot) and is a no-op on kexec since we skip that
path.
Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Co-developed-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Signed-off-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Jork Loeser <jloeser@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Move hv_stimer_global_cleanup() from vmbus's hv_kexec_handler() to
hv_machine_shutdown() in the platform code. This ensures stimer cleanup
happens before the vmbus unload, which is required for root partition
kexec to work correctly.
Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Signed-off-by: Jork Loeser <jloeser@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Inline these calls in bpf jit:
- bpf_get_smp_processor_id()
- bpf_get_current_task()
- bpf_get_current_task_btf()
s390 has a 8 KiB per-CPU prefix area in the CPU's
virtual address space, called the lowcore. It is a
struct that contains the cpu number and a pointer
to the current task. These are exactly the values
returned by the BPF helpers.
Emit a load from the lowcore instead of a helper
function call.
JIT output for `bpf_get_smp_processor_id`:
Before: After:
--------------- ----------------
brasl %r14,0x3ffe0385460 ly %r14,928
lgr %r14,%r2
JIT output for `bpf_get_current_task`:
Before: After:
--------------- ----------------
brasl %r14,0x3ffe0362a90 lg %r14,832
lgr %r14,%r2
Benchmark using [1] on KVM(virtme-ng).
./benchs/run_bench_trigger.sh glob-arr-inc arr-inc hash-inc
+---------------+--------------------+--------------------+--------------+
| Name | Before | After | % change |
|---------------+--------------------+--------------------+--------------|
| glob-arr-inc | 244.954 ± 0.654M/s | 278.501 ± 0.834M/s | + 13.70% |
| arr-inc | 311.597 ± 1.016M/s | 313.610 ± 0.331M/s | + 0.65% |
| hash-inc | 47.421 ± 0.017M/s | 47.600 ± 0.004M/s | + 0.38% |
+---------------+--------------------+--------------------+--------------+
[1] https://github.com/anakryiko/linux/commit/8dec900975ef
Signed-off-by: Maxim Khmelevskii <max@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20260414142930.528751-1-max@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
FRED and PTI were never intended to work together. No FRED hardware is
vulnerable to Meltdown and all of it should have LASS anyway.
Nevertheless, if you boot a system with pti=on and fred=on, the kernel
tries to do what is asked of it and dies a horrible death on the first
attempt to run userspace (since it never switches to the user page
tables).
Disable FRED when PTI is forced on, and print a warning about it.
A quick brain dump about what a FRED+PTI implementation would look like
is below. I'm not sure it would make any sense to do it, but never say
never. All I know is that it's way too complicated to be worth it today.
<brain dump>
The SWITCH_TO_USER/KERNEL_CR3 bits are simple to fix (or at least we
have the assembly tools to do it already), as is sticking the FRED entry
text in .entry.text (it's not in there today).
The nasty part is the stacks. Today, the CPU pops into the kernel on
MSR_IA32_FRED_RSP0 which is normal old kernel memory and not mapped to
userspace. The hardware pushes gunk on to MSR_IA32_FRED_RSP0, which is
currently the task stacks. MSR_IA32_FRED_RSP0 would need to point
elsewhere, probably cpu_entry_stack(). Then, start playing games with
stacks on entry/exit, including copying gunk to and from the task stack.
While I'd *like* to have PTI everywhere, I'm not sure it's worth mucking
up the FRED code with PTI kludges. If a user wants fast entry/exit, they
use FRED. If you want PTI (and sekuritay), you certainly don't care
about fast entry and FRED isn't going to help you *all* that much, so
you can just stay with the IDT.
Plus, FRED hardware should have LASS which gives you a similar security
profile to PTI without the CR3 munging.
</brain dump>
Reported-by: Gayatri Kammela <Gayatri.Kammela@amd.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Cc:stable@vger.kernel.org
Link: https://patch.msgid.link/20260421163136.E7C6788A@davehans-spike.ostc.intel.com
|
