| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add AD4883 compatible string to the AD4080 devicetree binding.
The AD4883 is a dual-channel, 16-bit, 40 MSPS SAR ADC, sharing the same
register map and interface as the AD4080 family. Like the AD4880, it
requires two SPI chip selects and two io-backends for its independent
ADC channels. The AD4883 differs from the AD4880 in resolution (16-bit
vs 20-bit), which requires distinct channel configuration in the driver,
precluding a fallback compatible.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Add new DT bindings for the pin controller found in the MT6858
(MediaTek Dimensity 7100) SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Nikolai Burov <nikolai.burov@jolla.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc5).
Conflicts:
drivers/net/amt.c
3656a79f94c47 ("amt: re-read skb header pointers after every pull")
586c4dcf28eb6 ("amt: no longer rely on RTNL in amt_fill_info()")
https://lore.kernel.org/amIaJr3aOQNS_Fvl@sirena.org.uk
Adjacent changes:
drivers/net/geneve.c
8efb8f8bbb35 ("geneve: require CAP_NET_ADMIN in the device netns for changelink")
0ba269933f73 ("geneve: convert config to RCU-protected pointer")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Lots of fixes, double the count even for the 'new normal'. Largely due
to my time off followed by a networking conference which distracted
most maintainers (less so the AI generators).
Including fixes from Bluetooth and WiFi.
Current release - regressions:
- wifi: mt76: fix MAC address for non OF pcie cards
Current release - new code bugs:
- mptcp: fix BUILD_BUG_ON on legacy ARM config
- wifi: cfg80211: guard optional PMSR nominal time
Previous releases - regressions:
- qrtr: ns: raise node count limit to 512, we arbitrarily picked
256 as a limit, turns out it was too low for real world deployments
- vhost-net: fix TX stall when vhost owns virtio-net header
- eth: amd-xgbe: fix MAC_AUTO_SW handling in CL37 AN
- wifi: ath12k: fix low MLO RX throughput on WCN7850
Previous releases - always broken:
- number of random AI fixes for SCTP, RDS and TIPC protocols
- more AI-looking fixes for WiFi drivers
- number of fixes for missing pointer reloading after skb pull
- reject BPF redirect use from qdisc qevent block
- tcp: initialize standalone TCP-AO response padding
- vsock/virtio: collapse receive queue under memory pressure to avoid
client OOMing the host with tiny messages
- ipv4: icmp: fill flow parameters in icmp_route_lookup decoy lookup,
make sure the ICMP response routing follows the routing policy
- gro: fix double aggregation of flush-marked skbs
- ovpn: fix various refcount bugs
- tls: device: push pending open record on splice EOF
- eth: mlx5:
- use sender devcom for MPV master-up
- fix MCIA register buffer overflow on 32 dword reads"
* tag 'net-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (234 commits)
drop_monitor: perform u64_stats updates under IRQ-disabled section
drop_monitor: fix size calculations for 64-bit attributes
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
mptcp: fix BUILD_BUG_ON on legacy ARM config
selftests: mptcp: userspace_pm: fix undefined variable port
mptcp: fix stale skb->sk reference on subflow close
mptcp: pm: userspace: fix use-after-free in get_local_id
mptcp: decrement subflows counter on failed passive join
mac802154: hold an interface reference across the scan worker
sctp: don't free the ASCONF's own transport in DEL-IP processing
phonet: check register_netdevice_notifier() error in phonet_device_init()
phonet: pep: fix use-after-free in pep_get_sb()
bnge/bng_re: fix ring ID widths
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
net: airoha: fix ETS channel derivation in airoha_tc_setup_qdisc_ets()
mctp: check register_netdevice_notifier() error in mctp_device_init()
ptp: netc: explicitly clear TMR_OFF during initialization
rds: tcp: unregister sysctl before tearing down listen socket
ipv6: Change allocation flags to match rcu_read_lock section requirements
net: slip: serialize receive against buffer reallocation
...
|
|
Mahua shares the same QREF TX/RPT/RX component naming as Glymur, but has a
different topology: a single QREF block fed by REFGEN4 only, rather than
the two independent blocks fed by REFGEN3 and REFGEN4 on Glymur.
Add qcom,mahua-tcsr compatible and document its required supply
properties. Note that REFGEN4 is supplied by regulators vdda-refgen3-1p2
and vdda-refgen3-0p9 on Mahua.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260721-tcsr_qre_0721-v10-2-d2fa68c63b78@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The QREF block supplies reference clocks to PCIe PHYs and requires
dedicated LDO supplies to operate. The digital control interface for QREF
(clkref_en registers) resides in TCSR on glymur. Since QREF has no
dedicated DT node of its own, these supply properties are placed in the
TCSR node which acts as the control interface for QREF.
Add a dedicated binding file for qcom,glymur-tcsr and document the supply
properties. As this binding will grow to cover more SoCs, mark the
required supplies per compatible using an allOf/if/then conditional.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260721-tcsr_qre_0721-v10-1-d2fa68c63b78@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The K3 I2S controllers normally use the published 7-clock layout:
sysclk, bclk, bus, func, sysclk_div, c_sysclk, c_bclk
However, K3 i2s1 has no dedicated sysclk divider and therefore uses a
6-clock layout:
sysclk, bclk, bus, func, c_sysclk, c_bclk
Describe the 4-clock K1 and both K3 layouts as separate tuples. Lower
the K3 minimum from 7 to 6 clocks while preserving the existing
7-clock ordering.
Fixes: 6bc6b28c0314 ("ASoC: dt-bindings: add SpacemiT K3 SoC compatible")
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260721-kx-i2s-dts-v1-2-d22cb6cfaab5@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove needless brackets and add missing brackets.
Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Update Documentation/RCU/* to suggest using the new type-aware
kmalloc_obj() per commit 2932ba8d9c99 ("slab: Introduce kmalloc_obj()
and family")
p = kmalloc(...);
-> p = kmalloc_obj(...);
Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add dmas and dma-names to describe TX and RX DMA channels for the i.MX94
XSPI controller.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://patch.msgid.link/20260722-xspi_dma_upstream-v3-1-6b7ff50cae8e@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce the "dpm_watchdog_enabled" module parameter to allow the DPM
watchdog to be enabled or disabled at boot time and runtime.
Additionally, introduce the CONFIG_DPM_WATCHDOG_ENABLED Kconfig option
to set the default value of the module parameter at compile time.
The primary motivation for this configurability resolves around Android
GKI (Generic Kernel Image). We want to enable CONFIG_DPM_WATCHDOG in
the GKI so the feature is available. However, because the GKI is shared
across many different devices, we don't want to inadvertently affect
devices that are unaware of this feature. This provides a way to
compile it in, but keep it disabled by default for those devices via the
kernel command line or module parameters.
To maintain backward compatibility, CONFIG_DPM_WATCHDOG_ENABLED relies
on `default y`. Previously, the DPM watchdog was always active if
CONFIG_DPM_WATCHDOG was set. Defaulting this new option to 'y' ensures
that the behavior remains unchanged for existing users and defconfigs
when they upgrade.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260720030821.2780257-3-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Document the default-intensity property to set a default color on
multicolor LEDs.
Update pwm-multicolor to support it and update the example to turn the
LED red on boot.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260713-multicolor-default-v3-1-fb43f3f789cf@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 7.3 (07/22/26) from Mario Limonciello:
"* Avoid running unit tests without amd-pstate
* Fixes for EPP on shared memory systems
* Fixes for dynamic EPP callbacks
* Avoid loading on guests
* Allow lowest nonlinear == minimum freq"
* tag 'amd-pstate-v7.3-2026-07-22' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: (923 commits)
cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks
cpufreq/amd-pstate: Cache the firmware programmed EPP value
cpufreq/amd-pstate: Toggle auto_sel in active mode on shared memory systems
cpufreq/amd-pstate: Fix EPP return type and handle errors during initialization
cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active
cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware
cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq
Linux 7.2-rc4
Revert "drm/amd/display: Restore 5s vbl offdelay for NV3x+ DGPUs"
drm/amd/display: check GRPH_FLIP status before sending event
drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock
drm/amd: Create a device link between APU display and XHCI devices
drm/amd/display: wire DCN42B mcache programming callback
drm/amd/display: set new_stream to NULL after release
drm/amd/display: Force PWM backlight on Lenovo Legion 5 15ARH05
drm/amdkfd: free MQD managers on DQM init failures
drm/amdgpu/ttm: Consider concurrent VM flushes for buffer entities
drm/amd/pm/smu7: Fix AC/DC switch notification
drm/amdgpu: Disable PCIe dynamic speed switching on Ryzen Pinnacle Ridge
drm/amdgpu: always emit the job vm fence
...
|
|
LTC3220 is a multi-display LED driver with I2C interface.
The LTC3220 provides individual brightness control (64-step),
blinking, and gradation features for up to 18 LED outputs.
Signed-off-by: Edelweise Escala <edelweise.escala@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260709-ltc3220-driver-v13-1-9b53237642eb@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
After adding ACPI _LPI support to intel_idle, update its admin-guide
documentation to cover the changed behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/12962673.O9o76ZdvQC@rafael.j.wysocki
|
|
The user cannot use MTE on VMAs created by mapping a guest_memfd file,
as arch_calc_vm_flag_bits() does not set VM_MTE_ALLOWED.
When creating a guest_memfd backed memslot,
kvm_arch_prepare_memory_region() rejects the memslot if MTE is enabled for
the VM and if guest_memfd has been mapped in a VMA that intersects the
memslot.
However, the documentation for KVM_SET_USER_MEMORY_REGION2 explicitly
states that the only condition for userspace_addr is for it to be a legal
userspace address, but the mapping is not required to be valid nor
populated at memslot creation.
If userspace sets userspace_addr to an address that hasn't been mapped, or
if userspace_addr belongs to a VMA that isn't backed by the guest_memfd
file, or if the VMA doesn't intersect the memslot, memslot creation is
successful and KVM ends up with a VM with MTE and guest_memfd-backed
memslots.
The same happens if the order is reversed: when userspace enables MTE, KVM
does not check if memslots backed by guest_memfd are already present.
Fix both issues by rejecting guest_memfd-backed memslots when MTE is
enabled, and by rejecting MTE when guest_memfd-backed memslots are already
present.
Fixes: 32e200bd6e44 ("KVM: arm64: Enable support for guest_memfd backed memory")
Tested-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://patch.msgid.link/20260722090354.94245-1-alexandru.elisei@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The mce=print_all command line option is supported but has never
been documented. Add it.
Suggested-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Shreshth Srivastava <shreshth.srivastava@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260723013730.3033-1-shreshth.srivastava@intel.com
|
|
The Banana Pi BPI-CM6 IO board consists of the BPI-CM6 compute module
plugged into an IO carrier board, which is used for evaluation and
development.
The core CM6 module is based on the SpacemiT K1 SoC and provides PMIC,
DDR, the eth0 PHY and wireless connectivity. The carrier board extends
this by adding the eth1 PHY and external interfaces including Ethernet,
PCIe M.2, USB, MicroSD, QSPI, and serial console connectivity.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://patch.msgid.link/20260712-bpi-cm6-v3-1-8d1e2045179d@pigmoral.tech
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
The EcoNet EN7528 MIPS SoC integrates an MT7530 Gigabit switch,
memory-mapped in the SoC register space like the built-in switches of
the MediaTek MT7988 and Airoha EN7581/AN7583 SoCs. Its four user ports
are connected to integrated Gigabit PHYs and its CPU port is connected
internally to the SoC Ethernet MAC.
Those three switches are MT7531-based, whereas the EN7528 has a genuine
MT7530 switch core (its chip revision register reads 0x7530). The two
generations differ in their register programming - for example the CPU
port is selected through the MT7530-style MFC register rather than the
MT7531 CFC register - so the EN7528 is not compatible with the existing
switch compatibles and cannot fall back to one of them.
Add the econet,en7528-switch compatible, with the same constraints as
the other built-in switches.
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/2133035bb22eacc8a0e21f86c0c800a45023ee01.1783770059.git.naseefkm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both of these guidelines are complimentary to one another - one specifying
guidelines on AI coding assistants, and the other specifying those for
tool-generated content.
Since they are complimentary to one another, provide a link to each in the
other.
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: SJ Park <sj@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260702164901.121128-1-ljs@kernel.org>
|
|
On systems with NVIDIA Olympus cores, a Device-nGnR* load can be
observed by a peripheral before an older, non-overlapping Device-nGnR*
store to the same peripheral. This breaks the program-order guarantee
that software expects for Device-nGnR* accesses and can leave a
peripheral in an incorrect state.
The erratum can occur only when all of the following apply:
- A PE executes a Device-nGnR* store followed by a younger
Device-nGnR* load.
- The store is not a store-release.
- The accesses target the same peripheral and do not overlap in bytes.
- There is at most one intervening Device-nGnR* store in program
order, and there are no intervening Device-nGnR* loads.
- There is no DSB or full DMB between the store and the load.
- Specific microarchitectural and timing conditions occur.
Insert a DMB OSH immediately before each raw MMIO load on affected CPUs.
As a full barrier, DMB OSH orders the older Device store before the
younger Device load and prevents the erroneous observation.
Add the barrier directly to the __raw_read*() helpers, independently of
the existing device-load-acquire alternative. On affected CPUs this adds
one DMB OSH per raw MMIO load, including each load used by
memcpy_fromio(). On unaffected CPUs the alternative remains a NOP.
Co-developed-by: Vikram Sethi <vsethi@nvidia.com>
Signed-off-by: Vikram Sethi <vsethi@nvidia.com>
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Link: https://lore.kernel.org/all/akPQ8F3OgER621UP@willie-the-truck/
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for AES-CCM to the crypto library.
This will be used to provide a streamlined implementation of the
"ccm(aes)" crypto_aead algorithm. Most users of "ccm(aes)" will also be
able to switch to the library, which as usual will be faster and
simpler, e.g.:
- fs/smb/client/
- fs/smb/server/
- net/mac80211/
- net/mac802154/
(I've already written proof-of-concept patches for all the above, and
they helped inform the API design.)
As in the AES-GCM API, incremental operation is supported. It has to be
used carefully, especially when decrypting, but it makes the API general
enough to work well for all users.
The AES-CCM library code calls aes_cbcmac_blocks() directly, bypassing
the higher-level aes_cbcmac_init(), aes_cbcmac_update(), and
aes_cbcmac_final(). The latter set of functions is useful only for
AES-CCM, so they don't make sense to keep around and will be removed
once the "ccm(aes)" crypto_aead starts using the AES-CCM library.
Initial test coverage is provided by the crypto_aead support added in a
later commit. I'm planning a KUnit test suite as well.
Link: https://patch.msgid.link/20260715221153.246410-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add support for AES-GCM to the crypto library.
This will be used to provide streamlined implementations of the
"gcm(aes)" and "rfc4106(gcm(aes))" crypto_aead algorithms. Most users
of these will also be able to switch to the library, which as usual will
be faster and simpler, e.g.:
- drivers/net/macsec.c
- fs/smb/client/
- fs/smb/server/
- net/ceph/messenger_v2.c
- net/mac80211/ (for both GMAC and GCMP)
- net/tipc/crypto.c
- security/keys/trusted-keys/trusted_dcp.c
(I've already written proof-of-concept patches for all the above, and
they helped inform the API design.)
As usual, the architecture-optimized AES-GCM code will be migrated into
the library as well (using the hooks provided in this commit as well as
the GHASH ones), eliminating lots of repetitive boilerplate code.
Incremental en/decryption is supported. Incremental operation is a bit
controversial in AEAD APIs because users have to be careful not to
consume any decrypted data that hasn't been authenticated yet. But I do
think it's the right choice here. It's not fundamentally different from
the existing incremental MAC APIs, and it's the only approach that's
general enough to work well for all users in the kernel:
- An array of virtually-addressed buffers (like that used by
BoringSSL's EVP_AEAD_CTX_sealv() and EVP_AEAD_CTX_openv()) doesn't
work in the kernel in general, since in some cases the data for a
single AES-GCM message is contained in a large number of highmem
pages that each need to be mapped into memory individually. That
can be done efficiently only by using CPU-local mappings, but there
is a limited number of those.
Ceph messenger v2 is a great example, as it can send or receive up
to 32 MiB in a single AES-GCM message. And it needs the
en/decrypted data to go into a (potentially large) number of bvecs
provided by a custom iterator, as well as into four
virtually-addressed buffers, two of which can be large buffers in
the vmalloc region.
Even just allocating an array big enough to store all the pointers
can be problematic in the kernel. There are cases in which
decryption runs in GFP_NOIO context or even in softirq context,
where memory allocations are not as reliable as they normally are.
- Meanwhile, 'struct scatterlist' (the choice of crypto_aead) has
turned out to be really inconvenient for anyone who *does* just have
virtually-addressed buffers. This is especially true if they can be
in the vmalloc region, including the stack, as in that case the
conversion to a scatterlist has to be done page-by-page.
And even for users who have all of their data in bare 'struct page',
none of them actually use 'struct scatterlist' as their native data
structure anyway. They actually use skbs, bvecs, or other formats.
- iov_iter is attractive, but ultimately not general enough either
(considering the Ceph case for example), but also too general in
some ways (like having support for userspace addresses). Additional
iter types like ITER_SKB would help a bit, but bloating iov_iter
with more types would reduce performance elsewhere in the kernel.
Initial test coverage is provided by the crypto_aead support added in a
later commit. I'm planning a KUnit test suite as well.
Link: https://patch.msgid.link/20260715221153.246410-7-ebiggers@kernel.org
Link: https://patch.msgid.link/20260722021730.16897-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull watchdog fixes from Guenter Roeck:
- airoha: Prevent division by zero when clock frequency is zero
- core: pretimeout: Fix UAF in watchdog_unregister_governor()
- ni903x_wdt: Check ACPI_COMPANION() against NULL
- s32g_wdt: remove incorrect options in watchdog_info struct
* tag 'watchdog-for-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
watchdog: airoha: Prevent division by zero when clock frequency is zero
watchdog: pretimeout: Fix UAF in watchdog_unregister_governor()
docs: watchdog: Fix brackets
watchdog: ni903x_wdt: Check ACPI_COMPANION() against NULL
watchdog: s32g_wdt: remove incorrect options in watchdog_info struct
|
|
min_heap_empty()
min_heap_empty()/min_heap_empty_inline() are documented as part of
the Min Heap API, but no such functions or macros exist in
include/linux/min_heap.h or lib/min_heap.c. Remove the stale
description.
Acked-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jyun-An Chen <jun930436@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260722044236.6346-1-jun930436@gmail.com>
|
|
Translate the "Include PATCH in the subject" and "Sign your work -
the Developer's Certificate of Origin" sections into Japanese.
Keep the DCO text in English as the original certificate text, and add
a Japanese note that the sign-off refers to the English DCO text.
Use a reStructuredText note directive to make it clear that the note is
specific to the Japanese translation.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Acked-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260720223410.421262-1-weibu@redadmin.org>
|
|
Remove the duplicate 'page' in the sentence describing large page
allocation accounting. The extra word makes the description confusing.
Signed-off-by: Yahya Toubali <yahya@yahyatoubali.me>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260718165613.1923550-1-yahya@yahyatoubali.me>
|
|
Documentation/filesystems/ext4/group_descr.rst contains a slightly
inaccurate description of the meta_bg layout. Fix it to be correect.
Link: https://patch.msgid.link/F6-Nv2DhZIxD7g0KzZFf36UXOLn6D8qTlOQQFjIuQb_GyiQtoEQCvvRzDKnpYeSrd_E9H_DQYygw1zBDzlR2KxqqGsmYjODQr2qmRdjuixw=@proton.me
Signed-off-by: dardaoe dardaoe@proton.me
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Document the single-lane and dual-lane QMP PCIe PHYs found on the
IPQ9650 SoC.
Unlike the PHYs in the other supported IPQ SoCs, the IPQ9650 PHYs require
the on-chip refgen supply to power up. Add the refgen-supply property
and require it only for the IPQ9650 compatibles.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260710-ipq9650_pcie_phy-v3-1-ef6018818d33@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Convert Texas Instruments Wakeup M3 Remote Processor from text to Dt
schema. Add optional resets and reset-names property which was missing
from legacy binding. make ti,hwmods deprecated as it no longer needed,
it is kept to support older board files without ti,sysc.
Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260719-ti-wkup_m3-v1-1-848a95b401a5@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The Opto Logic SCX1001511GGC49 is a 10.1" WXGA (1280x800) TFT LCD LVDS
panel.
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260623195741.495734-3-leoreis.costa@gmail.com
|
|
Qualcomm Maili SoC includes apps smmu that implements arm,mmu-500,
which is used to translate device-visible virtual addresses to
physical addresses. Add compatible for it.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Convert Texas Instruments OMAP2+ IOMMU from text to DT schema. Make the
'ti,hwmods' property optional and mark it deprecated as it is no longer
used, it is kept to support legacy dtbs.
Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add specific compatible strings to document the GPU SMMU present
in the Eliza SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add specific compatible strings to document the GPU SMMU present
in the Shikra SoC.
Signed-off-by: Bibek Kumar Patro <bibek.patro@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add interconnect bindings and RPMh-based interconnect driver support for
the upcoming Qualcomm Maili SoC.
* icc-maili
dt-bindings: interconnect: qcom: document the RPMh Network-On-Chip interconnect in Maili SoC
interconnect: qcom: add Maili interconnect provider driver
Link: https://patch.msgid.link/20260622-maili_icc-v2-0-18b5ac08c04f@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add Epoch Subsystem (EPSS) L3 scaling support on Qualcomm Shikra SoC.
EPSS hardware on Shikra is similar to other SoCs but supports only twelve
L3 frequency entries (LUT). Reading the LUT beyond supported frequencies
can expose incorrect frequencies.
Introduce new compatible to represent this constrained variant of EPSS.
* icc-shikra
dt-bindings: interconnect: qcom,osm-l3: Add EPSS L3 DT binding for Qualcomm Shikra SoC
interconnect: qcom: Add EPSS L3 scaling support for Shikra SoC
Link: https://patch.msgid.link/20260603-shikra_epss_l3-v3-0-3c2e0b796e78@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The ipq5210 has one dual lane and one single lane PCIe phy.
The dual lane phy is similar to the dual lane phy present in ipq9574. Hence
qcom,ipq5210-qmp-gen3x2-pcie-phy is documented with ipq9574's dual lane phy
as fallback compatible.
The single lane phy (qcom,ipq5210-qmp-gen3x1-pcie-phy) is documented as
specific compatible as it uses a combination of its own initialization
tables and some of the existing tables.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260721-pcie-phy-v5-1-8d403ef7e780@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Declare the USB-C QMP PHY present on the Qualcomm Shikra SoC. Shikra uses
3 resets to be programmed before initialising the phy. As per the hardware
documentation, the third reset is PHY_PRIM_SP0_BCR, hence naming it "phy".
Also, add remote endpoints and orientation switch support for getting
Type-C orientation information.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260712-usb-shikra-phy-v6-v6-2-1b3e51bf1541@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Update dt-bindings to add Shikra to QUSB2 Phy list. Shikra SoC
has two High Speed QUSB2 Phys.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://patch.msgid.link/20260712-usb-shikra-phy-v6-v6-1-1b3e51bf1541@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
current-limit controls
Add three optional properties to the MAX8903 charger binding to
describe board-level GPIO control of the DC and USB input current
limits:
DC input (TA / DOK pin):
- dc-current-limit-gpios (1..4 GPIOs): mux control lines feeding
the MAX8903 IDC resistor mux;
- dc-current-limit-mapping (uint32-matrix of {microamps,
gpio_bit_pattern} pairs): the available current levels and the
GPIO bit pattern that selects each level.
USB input (USB / UOK pin):
- usb-current-limit-gpios: a single GPIO driving the IUSB pin.
The IUSB pin is silicon-fixed by the MAX8903 datasheet (Pin
Description): low selects 100 mA, high selects 500 mA. Only
the GPIO mapping is board-specific; the current values are
not exposed in DT.
A dependentRequired block ties dc-current-limit-gpios and
dc-current-limit-mapping together so an incomplete DT cannot pass
validation with only one half of the pair.
These let userspace clamp the input draw via the standard
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT power_supply attribute. The HP
TouchPad uses both: two TLMM lines select between 0.5 A, 1.0 A,
1.5 A and 2.0 A DC input current limits behind the MAX8903B
charger, and a third TLMM line picks the IUSB 100 mA / 500 mA
limit.
These are purely additive; existing platforms remain unaffected.
Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260605-submit-power-max8903-dc-limit-v2-1-0c5396e98f14@herrie.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Convert ltc3589.txt to yaml format.
Additional changes:
- Add interrupts to match driver code
- Require lltc,fb-voltage-divider property ^(sw1|sw2|sw3|bb-out|ldo1|ldo2)$
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260714160147.1641379-1-Frank.Li@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The K3 SPI controller is compatible with K1, so allow K3 device trees to
use "spacemit,k1-spi" as fallback.
Signed-off-by: Cody Kang <cody.kang.hk@outlook.com>
Signed-off-by: Zhengyu He <hezhy472013@gmail.com>
Link: https://patch.msgid.link/20260717-k3-com260-spi-v7-2-rc2-b4-preview-20260716-v1-2-969a1b0f783f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
reboot-mode schema allows arbitrary "mode-.* properties but only a
subset actually makes sense and is valid. Provide negative look-ahead
pattern to disallow any modes not supported by the device, which
tightens the binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260701105907.197150-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add four new members to the POWER_SUPPLY_TECHNOLOGY
enum and sysfs interface to represent the Smart Battery
Data Specification v1.1 (Section 5.1.30 DeviceChemistry) battery types:
- Lead Acid (PbAc)
- Nickel Zinc (NiZn)
- Rechargeable Alkaline-Manganese (RAM)
- Zinc Air (ZnAr)
Update documentation to express these types.
Update ABI testing for these types.
Link: https://sbs-forum.org/specs/sbdat110.pdf
Signed-off-by: Boris Shtrasman <borissh1983@gmail.com>
Link: https://patch.msgid.link/20260624135718.286771-2-borissh1983@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Convert the Microchip LAN78xx family (LAN7800, LAN7801, LAN7850) binding
documentation from plain text to DT schema.
Restoring a mistakenly deleted email in MAINTAINERS file and fixing
microchip,lan7800.yaml.
Signed-off-by: Mikhail Lukianchikov <avermoal@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260712113821.12543-1-avermoal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Marco Giunta <marco_giunta@outlook.it> says:
Several Lenovo Legion laptops (Pro 7i 16IAX10H, Y9000P IAX10,
Pro 7 16AFR10H, R9000P ADR10) use AWINIC AW88399 smart amplifiers
to drive their bass woofers, connected via I2C as side codecs
to a Realtek ALC287 HDA codec.
Without a driver for these amplifiers, only the tweeters produce
sound, resulting in quiet and tinny audio.
An ASoC driver for the AW88399 already exists in-tree
(sound/soc/codecs/aw88399.c), contributed by AWINIC, but it targets
ASoC topologies and cannot drive the chip when it sits behind an
HDA controller. This series adds a proper HDA side codec driver,
following the established pattern used by the CS35L41, CS35L56,
and TAS2781 drivers.
Patch 1 extracts the device-level functions from the existing ASoC
driver into a shared library module (SND_SOC_AW88399_LIB) with a
shared header at include/sound/aw88399.h, following the CS35L41
precedent (SND_SOC_CS35L41_LIB / include/sound/cs35l41.h). This
avoids a build-time dependency on the full ASoC codec module and
ensures clean separation between the ASoC and HDA drivers.
Patches 2 through 5 prepare the shared library for use on ACPI-based
HDA systems: patch 2 extends channel assignment to work without
Device Tree properties, patch 3 adds a per-instance flag to bypass
an unreliable hardware status bit on certain boards, patch 4 adds
a firmware reload flag so that the HDA driver can signal that DSP
firmware needs to be re-uploaded after system sleep, and patch 5
adds a channel setter so that the HDA driver can configure the
amplifier without depending on ASoC-internal device headers.
NOTE ON FIRMWARE: This driver requires the firmware file
aw88399_acf.bin, which uses the same format and request path as the
existing ASoC driver. This firmware is not yet available in the
linux-firmware repository. We intend to coordinate with the AWINIC
maintainers (CC'd) to arrange its inclusion. In the meantime, users
can extract the firmware from the Windows driver and place it in
/lib/firmware/.
This work builds on the initial driver development by Yakov Till
("Lyapsus") and the bounty effort organized by Nadim Kobeissi:
https://github.com/nadimkobeissi/16iax10h-linux-sound-saga
Link: https://patch.msgid.link/DS7PR19MB77247D9AD698CF0FF37DB58BFCC62@DS7PR19MB7724.namprd19.prod.outlook.com
|
|
Convert Texas Instruments TPS51632 Voltage regulators from legacy text
to DT schema. No functional changes are introduced.
Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260717-ti-regulator-tp-v1-1-a49d41dc56d3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the TI OMAP4+ dmic bindings from txt to DT schema.
Following changes are introduced during converson:
- Drop ti,hwmods property as it is not needed since the sysc
conversion no existing DTS uses it.
- Add dma, dma-names, reg-names properties to match the DTS.
- Update example node to match existing DTS.
Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260713-ti-omap4-dmic-v1-1-3cc6e13decec@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Separate the title with commas (since they are all run together in the
produced output) and add a blank line before the descriptive text to
avoid a docs build error:
Documentation/firmware-guide/acpi/dsd/motorcomm-yt8xxx-phy.rst:70: ERROR: Unexpected indentation. [docutils]
Fixes: 28f431eac1e5 ("docs: acpi: dsd: add Motorcomm yt8xxx PHY properties")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260710053106.730399-1-rdunlap@infradead.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
