| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
kmemleak reports an object the first scan it is found unreferenced. Its
mark phase runs without stopping the rest of the kernel and without a
write barrier, so a live object whose only reference is briefly invisible
during a concurrent RCU update -- e.g. a VMA moved between maple tree
nodes, or a page-cache xa_node -- can be seen as unreferenced for that one
scan. Because an object is flagged as reported only once, such a
transient race turns into a permanent false positive.
Track how many consecutive scans each object has been seen unreferenced
and only report it once that reaches min_unref_scans, a new module
parameter. It defaults to 1, leaving the behaviour unchanged; setting it
higher (e.g. 2) still reports a genuine leak, one scan later, while an
object referenced again before the threshold restarts its run and is never
reported.
min_unref_scans can be set at boot with kmemleak.min_unref_scans=<n> or at
run-time via /sys/module/kmemleak/parameters/min_unref_scans.
Link: https://lore.kernel.org/20260713-catalin_pto-v1-2-5b93b1131089@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Provide a swap_fs_activate helper that directly sets up swap_fs_ops, and a
flag in struct swap_ops to indicate of NOFS swapping is allowed.
Link: https://lore.kernel.org/20260713093350.2154226-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <baoquan.he@linux.dev>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Youngjun Park <youngjun.park@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "alloc_tag: introduce IOCTL-based filtering for MAP", v8.
Currently, memory allocation profiling data is primarily exposed through
/proc/allocinfo. While useful for manual inspection, this text-based
interface poses challenges for production monitoring and large-scale
analysis:
1. Userspace must parse large amounts of text to extract specific
fields.
2. To find specific tags, userspace must read the entire dataset,
requiring many context switches and high data copying.
3. The kernel currently aggregates per-CPU counters for every allocation
size, even those the user intends to filter out immediately.
This series introduces a new IOCTL-based binary interface for allocinfo
that supports kernel-side filtering. By allowing the user to specify a
filter mask, we significantly reduce the work performed in-kernel and the
amount of data transferred to userspace. The IOCTL mechanism was chosen
for allocinfo to address the per-CPU counter aggregation bottleneck. A
traditional read() operation must report the total allocation count and
sizes for every code tag in the system. Doing so requires iterating
across all CPUs to sum their per-CPU counters for thousands of tags, which
introduces substantial runtime overhead.
The IOCTL interface allows userspace to push selective filtering criteria
directly into the kernel before the per-CPU counter aggregation. The
kernel aggregates per-CPU counters only for a small subset of tags that
match the filter. This results in significant performance improvement.
Beyond fast filtered retrieval, the IOCTL foundation allows introducing a
context capture mechanism in the future to capture the context for
specific allocations.
Performance measurements were conducted on an Intel Xeon Platinum 8481C
(224 CPUs) with caches dropped before each run.
The IOCTL mechanism shows a ~20x performance improvement for
filtered queries. The kernel avoids the expensive per-CPU counter
aggregation (alloc_tag_read) for any tags that fail the initial string
or location filters.
Scenario 1: Specific File Filtering (arch/x86/events/rapl.c)
1. Traditional (cat /proc/allocinfo | grep): 22ms (sys)
2. IOCTL Interface: 1ms (sys)
Scenario 2: Compound Filtering (Filename + Size)
1. Traditional: (cat ... | grep | awk): 21ms (sys)
2. IOCTL Interface: 1ms (sys)
Scenario 3: Size-Based Filtering (min_size = 1MB)
1. Traditional: (cat ... | awk): 21ms (sys)
2. IOCTL Interface: 14ms (sys)
This patch (of 6):
Add the following ioctl commands for /proc/allocinfo file:
ALLOCINFO_IOC_CONTENT_ID - gets content identifier which can be used to
check whether the file content has changed specifically due to module
load/unload. Every time a module is loaded / unloaded, the returned value
will be different. By comparing the identifier value at the beginning and
at the end of the content retrieval operation, users can validate
retrieved information for consistency.
ALLOCINFO_IOC_GET_AT - gets the record at the specified position. This is
the position of a record in /proc/allocinfo.
ALLOCINFO_IOC_GET_NEXT - gets the record next to the last retrieved one.
If no records were previously retrieved, returns the first record.
Note, function file and module names often have the same prefixes,
therefore when filtering for them, we compare the last 64 characters to
minimize the chances of name collisions.
[akpm@linux-foundation.org: include compat.h, per Suren]
Closes: https://lore.kernel.org/oe-kbuild-all/202607091820.qbjlGhKK-lkp@intel.com/
Link: https://lore.kernel.org/cover.1783532853.git.abhishekbapat@google.com
Link: https://lore.kernel.org/15596de2607ef13e7c77c6d74763f4ae992ec475.1783532853.git.abhishekbapat@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Abhishek Bapat <abhishekbapat@google.com>
Acked-by: Hao Ge <hao.ge@linux.dev>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, hugetlb_cma reservation only supports absolute sizes (e.g.,
hugetlb_cma=2G or hugetlb_cma=0:1G,1:1G). This can be restrictive in
heterogeneous environments or when deploying common kernel command lines
across machines with different memory capacities.
Add support for percentage-based hugetlb_cma reservation (e.g.,
hugetlb_cma=20% or hugetlb_cma=0:20%,1:10%).
The percentage is calculated against the total memory (for global
settings) or against the node-specific memory (for node-specific settings)
using memblock APIs during early boot.
Link: https://lore.kernel.org/20260807040003.2156630-1-souravpanda@google.com
Signed-off-by: Sourav Panda <souravpanda@google.com>
Acked-by: Usama Arif <usama.arif@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, userspace has limited visibility into the exact active runtime
state of memory allocation profiling and its page extension compression
('sysctl.vm.mem_profiling={0|1|never}[,compressed]').
While reading the sysctl provides basic on/off status, it is currently
impossible for userspace to natively determine whether page-tag
compression was successfully enabled without scraping dmesg boot logs.
Add a new read-only sysctl representing how compression was configured
at boot time.
Link: https://lore.kernel.org/c795f8089f82841e8a6e00d7ca286da2b23aeb7b.1785950530.git.abhishekbapat@google.com
Signed-off-by: Abhishek Bapat <abhishekbapat@google.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Hao Ge <hao.ge@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The KSM code already stores and checks the stable node key via
folio->mapping, but the comment in ksm_get_folio() and the reverse mapping
documentation in ksm.rst still refer to page->mapping.
This is a pure wording update to match the folio-based implementation. No
functional change is intended.
Link: https://lore.kernel.org/20260805105927.41987-1-hongfu.li@linux.dev
Signed-off-by: Hongfu Li <lihongfu@kylinos.cn>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Xu Xin <xu.xin16@zte.com.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Cc: Alex Shi <alexs@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ext4 and f2fs don't prevent filesystem-level encrypted files from being
set up directly as swap files. In this case, encryption is bypassed.
No one should be doing this, vs. the methods of encrypted swap that
actually do work (such as swapping to a dm-crypt device, or swapping to a
loopback device on top of a filesystem-level encrypted file).
Nevertheless, to prevent user error, make swapon() explicitly reject this
case. Document this behavior in fscrypt.rst as well.
Link: https://lore.kernel.org/20260803180426.3123-1-ebiggers@kernel.org
Fixes: 9bd8212f981e ("ext4 crypto: add encryption policy and password salt support")
Fixes: f424f664f0e8 ("f2fs crypto: add encryption policy and password salt support")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Baoquan He <baoquan.he@linux.dev>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@arm.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Free page reporting currently hardcodes a 2-second interval between
reports. This rigid delay cannot accommodate diverse guest workloads.
This patch introduces a module parameter, page_reporting_delay_ms
(default: 2000), allowing users to tune the reporting rate:
- Lower values enable aggressive memory reclamation by returning unused
pages to the host immediately.
- Higher values help batch pages during spiky allocation/free churn,
reducing hypercalls and nested page fault overheads.
Setting the delay to 0 is safe and execution is strictly gated by:
- reporting is only triggered by high-order page frees.
- expensive hypercalls are bounded by a slot capacity watermark check
before proceeding.
Link: https://lore.kernel.org/20260731193705.2902728-1-pratmal@google.com
Signed-off-by: Pratyush Mallick <pratmal@google.com>
Reviewed-by: SJ Park <sj@kernel.org>
Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
zram has always reset all previously set parameters for the given
algorithm in comp_params_store(). Make documentation more clear and
explicitly state that all relevant/necessary parameters should be set in
one configuration write.
Link: https://lore.kernel.org/20260730075158.1339787-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- New API to combine configuration and preparation and users
New hardware support:
- Mediatek MT8189 SoC uart dma support
Updates:
- Designware dma driver flatten desc structures and simplify code,
interrupt-path groundwork changes, first part of PCI EP DMA support
- Updates to zynqmp_dma with runtime PM and device removal
improvments
- Xilinx dma optimizations for AXIDMA and MCDMA channel management"
* tag 'dmaengine-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (73 commits)
dmaengine: dw-edma: Mark emulated IRQ as level-triggered
dmaengine: idxd: assign all engines to group 0 in IAA defaults
dmaengine: qcom_hidma: remove conditional return with no effect
dmaengine: qcom-bam-dma: fix autosuspend cleanup during removal
dmaengine: fsl-edma: tracing: no ptr dereference during log output
dmaengine: dw-edma: Program endpoint function numbers
dmaengine: dw-edma-pcie: Add chip flags to match data
dmaengine: dw-edma-pcie: Handle optional data blocks
dmaengine: dw-edma-pcie: Factor out descriptor block address lookup
dmaengine: dw-edma-pcie: Add register offset match flag
dmaengine: dw-edma-pcie: Add platform ops to match data
dmaengine: dw-edma-pcie: Rename vsec_data to dma_data
dmaengine: dw-edma-pcie: Add capability match data
dmaengine: dw-edma-pcie: Track non-LL mode in DMA data
dmaengine: dw-edma: Add partial channel ownership mode
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dmaengine: dw-edma: Add core quiesce operations
dmaengine: dw-edma: Add per-channel interrupt routing control
dmaengine: dw-edma: Factor out HDMA interrupt setup helper
dmaengine: dw-edma: Defer channel IRQ handling to workqueue
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual bunch of new device and driver support and updates to
existing drivers and addition of Manivannan to help with reviews.
New Support:
- Mediatek MT8196 DSI PHY support
- Renesas RZ/G3L usb2 support
- Qualcomm SM8475 QMP USB PHY and PCIe phy, IPQ9650 QMP PCIe PHY,
QUSB2 Phy for Shikra SoC, Hawi support for QMP PCIe phy and UFS
PHY. Glymur QMP PCIe Multi-PHY driver and multiple link-mode
support, ipq5210 PCIe phy support
- Spacemit USB3/PCIe comb PHY driver
Updates:
- Samsung hdptx driver improvements for modernizing the register
access and code cleanup
- Qualcomm drop duplicate v8 DP headers, improved runtime handling
for qmp drivers
- Rockchip clock lane phase tuning and 2500 Mbps support and TMDS
rate handling
- Freescale imx8mq improvements for runtime pm, pd handling"
* tag 'phy-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (76 commits)
MAINTAINERS: Add Manivannan Sadhasivam as the Reviewer for Generic PHY Framework
phy: rockchip-samsung-dcphy: fix out-of-range max_register
phy: qcom: qmp-pcie: Add QMP PCIe Multi-PHY driver
dt-bindings: phy: qcom: Add Glymur QMP PCIe multiple link-mode PHY
phy: rockchip: samsung-hdptx: Consistently use bitfield macros
phy: rockchip: samsung-hdptx: Simplify GRF access with FIELD_PREP_WM16()
phy: rockchip: samsung-hdptx: Drop restrict_rate_change handling
phy: rockchip: samsung-hdptx: Consolidate consumer_put on error path
phy: rockchip: samsung-hdptx: Drop TMDS rate setup workaround
phy: rockchip: samsung-hdptx: Handle uncommitted PHY config changes
phy: rockchip: samsung-hdptx: Fix rate recalculation for 3.2GHz FRL
phy: rockchip: samsung-hdptx: Guard against clk rate integer underflow
phy: rockchip: samsung-hdptx: Prevent divide-by-zero when computing clk rate
phy: rockchip: samsung-hdptx: Fix rate recalculation for high bpc
phy: qcom: qmp-combo: Drop qmp_v4_calibrate_dp_phy
phy: qcom: qmp-combo: Correct pre-emphasis table for QMP v4 DP PHYs
phy: renesas: rcar-gen3-usb2: Ignore missing VBUS regulator
phy: qcom: qmp-pcie: Add support for SM8475 Gen3x1 PCIe0 port
phy: qcom: qmp-pcie: Add pcs_lane1 offset to V5 offsets
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add SM8475 QMP PHY
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Intel dmi quirks ghost list handling for Asus Zenbook Duo,
Asus ROG Zephyrus Duo and Asus Expertbook. Intel Peripheral
bra_block_alignment handling
- Cadence library BRA_NumBytes[8] support
- Qualcomm SCP address paging, bus mclk_freq support. Increase of
data ports to 17 and driver improvements
* tag 'soundwire-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: dmi-quirks: Disable ghost Realtek on Asus ROG Zephyrus Duo
soundwire: stream: validate slave port properties
soundwire: honor clock_reg_supported in the clock scaling check
soundwire: qcom: set the bus mclk_freq property
soundwire: dmi-quirks: Disable ghost Realtek on Asus Zenbook Duo
soundwire: intel_ace2x: handle the max_data_per_frame property
soundwire: get mipi-sdw-bra-mode-max-data-per-frame property
soundwire: intel: handle Peripheral bra_block_alignment
soundwire: Add bra_block_alignment property support
soundwire: cadence_master: add BRA_NumBytes[8] support
soundwire: bus.h: repair kernel-doc comments
soundwire: intel_auxdevice: Add cs42l44 to wake_capable_list
soundwire: qcom: add SCP address paging support
soundwire: dmi-quirks: add a global ghost list
soundwire: dmi-quirks: Disable ghost Realtek on Asus Expertbook
soundwire: qcom: Allocate sruntime array dynamically
soundwire: qcom: Fix port exhaustion check in stream_alloc_ports
dt-bindings: soundwire: qcom: Increase max data ports to 17
|
|
of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- swiotlb:
- new configuration option for the default pool size
(Jagadeesh Pagadala)
- reduce overhead for high watermark tracking (chenhuguanshen)
- minor code cleanups and improvements (Vova Sharaienko, Honglei Huang
and Marek Szyprowski)
- add proper tracking of the shared DMA state through direct, pool and
swiotlb paths (Aneesh Kumar K.V)
This is important for confidential-computing
* tag 'dma-mapping-7.3-2026-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/swiotlb: decouple high watermark tracking from CONFIG_DEBUG_FS
MAINTAINERS: update tree for DMA MAPPING HELPERS
dma/swiotlb: introduce Kconfig option for compile-time default pool size
dma-direct: Improve readability of the dma_direct_map_sg() for P2PDMA case
iommu/dma: simplify dma_iova_destroy() and drop the free_iova helper
dma-coherent: use KiB in DMA allocation logs
dma-coherent: fix spacing coding style issue
* tag 'dma-mapping-7.3-2026-08-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (23 commits)
swiotlb: remove unused SWIOTLB_FORCE flag
dma: swiotlb: handle set_memory_decrypted() failures
dma: swiotlb: free dynamic pools from process context
dma-direct: rename ret to cpu_addr in alloc helpers
dma-direct: select DMA address encoding from __DMA_ATTR_ALLOC_CC_SHARED
dma-direct: set decrypted flag for remapped DMA allocations
dma-direct: make dma_direct_map_phys() honor DMA_ATTR_CC_SHARED
dma-direct: Move dma_direct_map_phys() to dma/direct.c
dma-direct: pass attrs to dma_capable() for DMA_ATTR_CC_SHARED checks
dma-mapping: make dma_pgprot() honor __DMA_ATTR_ALLOC_CC_SHARED
dma: swiotlb: track pool encryption state and honor DMA_ATTR_CC_SHARED
dma: swiotlb: pass mapping attributes by reference
dma-pool: track decrypted atomic pools and select them via attrs
dma-direct: use __DMA_ATTR_ALLOC_CC_SHARED in alloc/free paths
dma-mapping: Add internal shared allocation attribute
coco: arm64: s390: powerpc: Mark secure guests with CC_ATTR_GUEST_MEM_ENCRYPT
dma-direct: swiotlb: handle swiotlb alloc/free outside __dma_direct_alloc_pages
s390: Expose protected virtualization through cc_platform_has()
swiotlb: Preserve allocation virtual address for dynamic pools
dma: free atomic pool pages by physical address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Add kfree_rcu_nolock() that can be used from contexts where spinning
on a lock might be unsafe, such as a BPF program attached to an
arbitrary function, or in NMI context. This complements the existing
kfree_nolock() support (Harry Yoo)
- Runtime instead of compile-time slabobj_ext sizing.
Avoid wasting memory when memory allocation profiling is compiled but
not enabled, with initial partial support to also avoid wasting
memory for objcg pointers when those are not needed, while profiling
is enabled (Vlastimil Babka)
- Various non-urgent fixes, cleanups and optimizations (Hao Li,
Hongling Zeng, Li RongQing, Li Xiasong, Seongjun Hong, Shengming Hu)
* tag 'slab-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (31 commits)
mm/slab, kfence, memcg: completely remove obj_ext for kfence objects
mm/slab: stop allocating objcg pointers when unnecessary
mm/slab: add cache_ and slab_needs_objcg() helpers
mm/slab: stop exporting kvfree_rcu_barrier[_on_cache]()
slub_kunit: extend the test for kfree_rcu_nolock()
mm/slab: introduce kfree_rcu_nolock()
mm/slab: introduce struct kvfree_rcu_head for kvfree_rcu batching
mm/slab: reduce slabobj_ext memory with allocation profiling disabled
mm/slab: introduce slab_obj_ext_has_codetag()
mm/slab: allow kfree_rcu_sheaf() on PREEMPT_RT
mm/slab: extend deferred free mechanism to handle rcu sheaves
mm/slab: use call_rcu() in unknown context if irqs are enabled
mm/slab: handle the !allow_spin case in kfree_rcu_sheaf()
mm/slab: change struct slabobj_ext to a union
mm/slab: replace slab.stride with obj_exts_in_object
mm/slab: abstract slabobj_ext.ref access
mm/slab: abstract slabobj_ext.objcg access
mm/slab: make slab_obj_ext() determine object index
mm: move struct slabobj_ext to mm/slab.h
mm/slab: remove objs_per_slab()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen
"Highlights:
Major refactoring effort: stop setting acpi_device_name/class() and
pnp.device_class to facilitate their eventual removal
Many rollback/remove path fixes (presumably mostly found by AI)
Miscellaneous cleanups / refactoring / improvements
amd/halo:
- Add Halo RGB LED driver
amd/hsmp:
- Properly serialize probe, remove, and data paths
- Add support for protocol v7 used by Family 1AH Model 80H
- Fix error checking corner cases (largely from AI review)
- Reject negative power cap
amd/pmc:
- Improve behavior on platforms that do not support STB
- Add T14 Gen2 AMD (20XL) to s2idle quirk list
amd/pmf:
- Add ioctl interface to retrieve device metrics
- Add support for new metrics tables used by Family 1AH Model 80H
qcom-hamoa-ec (arm64):
- Reject short responses
asus-nb-wmi:
- Support ProArt key on ASUS ProArt PX13
asus-armoury:
- Gate PPT writes behind active fan curve
- Add power limits for more models
dell-wmi-base:
- Fix handling of ultra performance key
dell-wmi-sysman:
- Don't hex dump attribute security buffer
hp-bioscfg:
- Various fixes
- Improve reduced ACPI packages support (necessary for HP EliteBook 840 G2)
lg-laptop:
- Fix LED resource handling
- Add support for events used in newer models
- Fix keyboard backlight support on LG Gram 16T90SP
hp-wmi:
- Generalize thermal params to board params
- Manage CPU and GPU PWM independently
- Add GPU MUX switch support
- Add Victus 15-fb0xxx support
- Add OMEN MAX 16-ak0xxx, OMEN 16-n0xxx, OMEN 16-wd0xxx, OMEN
16-wf0xxx, and OMEN board ID 8D88 support
- Add OMEN Transcend 16-u0xxx support
huawei:
- Add support for Fn-lock ACPI interface found on newer Huawei
laptops such as MateBook 14 2024
ISST:
- Improve input validation (many fixes)
- Disallow SST-CP (core-power) feature if perf profile add fails
lenovo/yb9-kbdock:
- Add driver for Yoga Book 9 14IAH10
lenovo/ymc:
- Extend hinge switch query to support Yoga 9 2-in-1 14IPH11
- Prevent loading on Yoga Book 9 14IAH10 to avoid duplicated input
nodes
msi-ec:
- Add MSI Raider A18 HX A9WJG and MSI Katana GF76 11UEK support
msi-wmi:
- Add MSI Claw M-Center keys support
oxpec:
- Add support for OneXPlayer X2 Mini Pro
redmi-wmi:
- Report kbd backlight cycle, OEM preset power mode, and FnLock
toggle events to userspace
samsung-galaxybook:
- Add Samsung Galaxy Book6 Pro support
thinkpad_acpi:
- Add USB-C Security support
uniwill-laptop:
- Add keyboard backlight, AC auto boot, and USB powershare support
- Add MACHENIKE L16 Pro, AiStone X4SP4NAL, and Avell A60 MUV support
- Make lightbar max brightness configurable and add support for
LAPQC71A/B"
* tag 'platform-drivers-x86-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (152 commits)
platform/x86: think-lmi: Fix current password length check
platform/x86: redmi-wmi: report EC state change events
MAINTAINERS: update Intel PMC Core maintainer contact
platform/x86: oxpec: Add support for OneXPlayer X2 Mini Pro
platform/x86: thinkpad_acpi: Fix fan speed reporting on Edge E330
platform/x86: msi-ec: Add MSI Katana GF76 11UEK EC firmware
platform/x86: think-lmi: Fix certificate thumbprint sysfs output
mlxbf-bootctl: fix the build error with FIELD_PREP()
platform/x86: think-lmi: Free system certificate signatures
platform/x86: ISST: Add a NULL check for sst_inst[]
platform/x86: ISST: Return error during profile addition
platform/x86: ISST: Just allow 2 bits for SST feature enable
platform/x86: ISST: Use PP level enable mask
platform/x86: ISST: Validate parameter for frequency and priority
platform/x86: ISST: Validate parameter for core power state
platform/x86: ISST: Validate max level for set feature
platform/x86: ISST: Validate logical CPU id and clos id
platform/x86: ISST: Validate level in perf mask ioctls
platform/x86: ISST: Validate socket ID in clos_assoc ioctl
platform/x86/amd/hsmp: Reject negative power cap writes in hwmon
...
|
|
pstore
Users of panic_print / panic_sys_info are usually aware of the potentially
huge amount of information displayed with such options - their goal by
using them is indeed to dump more information during panic!
What might come unnoticed at first is the impact that the console_verbose()
call on panic path has, specially in cases that users rely on pstore as
a means to collect the panic logs. Recent experience shows that dumping
all tasks in an ARM64 system (with qcom_geni tty driver) gets a 2 minute
delay on panic time due to writing such information to console. But in
that case, pstore was used, so there was no need for console printing,
and suppressing that reduced the full time to less than 0.5 second.
The option "printk.console_no_auto_verbose" aims exactly at this use
case: avoid automatically increasing the loglevel during panic path.
So, let's officially document this to avoid users wasting their time
either on long panic printing or debugging the panic delays.
While at it, improve the readability of the panic_print text, by
adding some line breaks.
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Bradley Morgan <include@grrlz.net>
Reviewed-by: Feng Tang <feng.tang@linux.alibaba.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260819183419.2203903-1-gpiccoli@igalia.com>
|
|
CPU_FREQ and CPU_IDLE are used in descriptions of some kernel parameters
so add their descriptions to the build options list.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260815172934.3604009-1-rdunlap@infradead.org>
|
|
The scheduler core communicates the initial cpu controller settings
to the BPF scheduler through ops.cgroup_init() and reports subsequent
changes through the corresponding ops.cgroup_set_*() callbacks.
Whether and how a knob takes effect is up to the loaded scheduler:
it may implement the corresponding callback partially or not at all,
so cpu.max, cpu.weight and friends can silently have no effect.
Document this in the basics section of sched-ext.rst.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- mhuv2:
- convert channel translation to fw_xlate()
- use generic device property APIs
- axiado:
- add AX3005 mailbox controller driver and DT bindings
- bcm2835:
- use platform_get_irq()
- simplify probe error handling
- cix:
- fix DT property string typo
- use dev_err_probe()
- exynos:
- add Exynos850 mailbox driver support and DT bindings
- microchip:
- add null check for devm_kasprintf()
- pcc:
- fix missed-interrupt command timeout
- verify shared memory signature
- notify clients on polled completion
- qcom:
- fix CPUCP PREEMPT_RT deadlock and NULL data crash
- fix IPCC duplicate channel allocation across holes
- add IPQ5210 APCS and Nord IPCC bindings
- riscv:
- validate RPMI notification buffer lengths and event payload bounds
- rockchip:
- manage peripheral clock with devm helper
- drop unused struct field
- ti-msgmgr:
- convert bindings to DT schema
- remove redundant dev_err()/dev_err_probe() on IRQ request failures
across drivers
* tag 'mailbox-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (22 commits)
mailbox: add Axiado AX3005 mailbox driver
dt-bindings: mailbox: add Axiado AX3005 mailbox
dt-bindings: mailbox: Convert TI Message Manager to DT schema
mailbox: cix: fix DT property name string typo and use dev_err_probe()
mailbox: riscv-sbi-mpxy: validate RPMI notification lengths
mailbox: bcm2835: use platform_get_irq and simplify probe
mailbox: qcom-ipcc: fix duplicate channel allocation across holes
mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf()
mailbox: Remove redundant dev_err()/dev_err_probe()
dt-bindings: mailbox: qcom: Add IPQ5210 APCS compatible
dt-bindings: mailbox: qcom-ipcc: Document Nord IPCC
mailbox: exynos: Add support for Exynos850 mailbox
dt-bindings: mailbox: google,gs101-mbox: Add samsung,exynos850-mbox
mailbox: pcc: Fix command timeout due to missed interrupt
mailbox: pcc: Check shared memory signature on request
mailbox: pcc: Notify clients on polled completion
mailbox: rockchip: drop unneeded runtime pointer (pclk)
mailbox: rockchip: disable pclk on probe failure and unbind
mailbox: qcom-cpucp: handle NULL data in send_data callback
mailbox: qcom-cpucp: fix PREEMPT_RT self-deadlock in IRQ handler
...
|
|
This commit updates the Italian translation in `process/` following
these changes:
commit 44abc8fcbff2 ("Documentation: process: Arbitrarily bump kernel major version number")
commit ba2457109d5b ("Documentation: process: Also mention Sasha Levin as stable tree maintainer")
commit 5ce70894f6ca ("Doc: correct spelling and wording mistakes")
commit 46298375477b ("linux-next: update maintainer info.")
commit 43e9076a00b1 ("docs: Fix conflicting contributor identity info")
commit b27f9e8079bf ("docs: remove Documentation/dontdiff")
commit 9734b3e753ad ("docs: 5.Posting: mentioned Suggested-by: tag")
commit 4e6b7141d169 ("docs: clarify rules wrt tagging other people")
commit 944df7a31452 ("docs: update the guidance for Link: tags")
commit 0a83293322fd ("doc: development-process: add notice on testing")
commit a037699da0a1 ("docs: Add debugging section to process")
commit 78d979db6cef ("docs: add AI Coding Assistants documentation")
commit a66437c27979 ("Documentation: Provide guidelines for tool-generated content")
commit a592a36e4937 ("Documentation: use a source-read extension for the index link boilerplate")
commit 102606402f4f ("Documentation: Project continuity")
commit a03ef333fbd6 ("Documentation: security-bugs: explain what is and is not a security bug")
commit d0b343605f1b ("kernel-docs: Add new section for Rust learning materials")
commit 57937eac1f78 ("kernel-docs: Add book to process/kernel-docs.rst")
commit d8c949c577b5 ("docs/licensing: Clarify wording about "GPL" and "Proprietary"")
commit ebf1bafd0907 ("LICENSES: Explicitly allow SPDX-FileCopyrightText")
commit 9fa7153c31a3 ("rust: conclude the Rust experiment")
commit 47cb33cedf47 ("docs: clarify wording in programming-language.rst")
commit 45a92c0b91d7 ("docs: maintainers: add SPDX license to the file")
commit 2932ba8d9c99 ("slab: Introduce kmalloc_obj() and family")
commit e4c8b46b924e ("slab: Introduce kmalloc_flex() and family")
commit d957b4184aee ("Documentation: deprecated.rst: kmalloc-family: mark argument as optional")
commit 120a64c8021d ("Documentation: process: fix brackets")
commit 079a028d6327 ("string: Remove strncpy() from the kernel")
commit e551bd4109d2 ("Documentation: remove :kyb: tags")
commit 4971ca2007e3 ("docs: process: email-client: add Thunderbird "Toggle Line Wrap" extension")
commit f44a29784f68 ("Documentation: update maintainer-pgp-guide for latest best practices")
commit 273aa250f138 ("Documentation: Improve wording on requirements for a free Nitrokey")
commit 6c5c07bc8589 ("docs: process: maintainer-pgp-guide: update kernel.org docs link")
commit 54857c52452a ("docs: maintainer-pgp-guide.rst: add a reference for kernel.org sign")
commit a556bd882b94 ("docs: align with scripts/syscall.tbl migration")
commit e5b1c0fa4ff2 ("Documentation: Remove :manpage: from non-existing man pages")
commit 78a00cac1e96 ("docs: fix 're-use' -> 'reuse' in documentation")
commit ec6fd28baf61 ("docs: remove unneeded maintainer_handbooks_main label")
commit 8eae6da5f56c ("docs: auto-generate maintainer entry profile links")
commit bda185c30593 ("docs: maintainers_include: Only show main entry for profiles")
commit 2783096fb1dd ("docs: submit-checklist: Expand on build tests against different word sizes")
commit fb12098d8ee4 ("docs: submit-checklist: Allow creating cross-references for ABI README")
commit 5a63f0369bda ("docs/.../submit-checklist: Use Documentation/admin-guide/abi.rst for cross-ref of README")
commit e5880f95a979 ("docs: process: discourage pointless boilerplate kdoc")
commit 2c62e2e874d1 ("coding-style: fix verb typo")
commit 197bbebd2581 ("docs: Update documentation to avoid mentioning of kernel.h")
commit eba6ffd126cd ("docs: kdoc: move kernel-doc to tools/docs")
commit 7c6d969d5349 ("Documentation: adopt new coding style of type-aware kmalloc-family")
commit 323fa4b9608b ("Documentation: Fix syntax of kmalloc_objs example in coding style doc")
commit d49172bbd7eb ("Documentation: clarify the expected collaboration with security bugs reporters")
commit 3a68841d1d9b ("Documentation: smooth the text flow in the security bug reporting process")
commit ceddb2c001d9 ("Documentation: insist on the plain-text requirement for security reports")
commit f2b1cbef1536 ("Documentation: minor updates to the security contacts")
commit a72b832a4823 ("Documentation: explain how to find maintainers addresses for security reports")
commit 496fa1befba1 ("Documentation: clarify the mandatory and desirable info for security reports")
commit f387e2e2b9d3 ("Documentation: fix two typos in latest update to the security report howto")
commit aed3c3346765 ("Documentation: security-bugs: do not systematically Cc the security team")
commit 4bf85afb9f3e ("Documentation: security-bugs: clarify requirements for AI-assisted reports")
commit 561458db0d6b ("docs: security-bugs: add a link to the threat-model documentation")
commit 5f5e7344322f ("kbuild: generate offset range data for builtin modules")
commit 41047d53bcff ("docs:process:changes: fix version command for btrfs-progs")
commit 82a1978d0fdc ("kheaders: use 'tar' instead of 'cpio' for copying files")
commit d2b239099cf0 ("docs: changes: update Sphinx minimal version to 3.4.3")
commit 5e25b972a22b ("docs: changes: update Python minimal version")
commit 118c40b7b503 ("kbuild: require gcc-8 and binutils-2.30")
commit 28d51df0dbaa ("Documentation: update binutils-2.30 version reference")
commit fc6edeea53f4 ("docs: Remove reiserfsprogs from dependencies.")
commit bc20c56e98e0 ("docs: changes: better document Python needs")
commit 20c098928356 ("kbuild: Bump minimum version of LLVM for building the kernel to 15.0.0")
commit 903922cfa0e6 ("lib/Kconfig.debug: Set the minimum required pahole version to v1.22")
commit 8913632998fc ("Documentation: Fix typos and grammatical errors")
commit c99fcb58501e ("docs: Fix an erroneous reference to sphinx.rst")
commit d8a224f519c6 ("docs: changes/ver_linux: fix entries and add several tools")
commit ece7e57afd51 ("docs: changes.rst and ver_linux: sort the lists")
commit f32fb9c58a5b ("rust: bump Rust minimum supported version to 1.85.0 (Debian Trixie)")
commit c3a00a3f31ff ("rust: bump `bindgen` minimum supported version to 0.71.1 (Debian Trixie)")
commit ce3267a39a92 ("kbuild: Bump minimum version of LLVM for building the kernel to 17.0.1")
commit 2c1ccd9a1d78 ("docs: changes.rst: restore pahole 1.26 minimum (regressed by sort)")
commit 3f997cbf676b ("docs: process: submitting-patches: split canonical patch format section")
commit 6356f18f09dc ("Align git commit ID abbreviation guidelines and checks")
commit cd9123eeb224 ("docs: submitting-patches: clarify Acked-by and introduce "# Suffix"")
commit 25fb101385f7 ("docs: submitting-patches: clarify difference between Acked-by and Reviewed-by")
commit 08c035da54a3 ("docs: submitting-patches: clarify that signers may use their discretion on tags")
commit 95767a592dc9 ("docs: submitting-patches: document the format for affiliation")
commit dc896f853e1a ("docs: submitting-patches: adjust Fixes definition slightly")
commit 22014a230093 ("Documentation/process: submitting-patches: fix typo in "were do"")
commit e36a7b1e1734 ("docs: submitting-patches: Clarify that removal of Acks needs explanation too")
commit 8a12e3fbf2c3 ("docs: submitting-patches: suggest adding previous version links")
commit 6252e5c1c20e ("docs: add an Assisted-by mention to submitting-patches.rst")
commit 48c3876a6a6f ("docs: submitting-patches: Clarify that "reviewer" is a person")
commit 83f71fbc66fb ("docs: submitting-patches: Fix section structure around DCO")
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260816193906.68808-1-federico.vaga@vaga.pv.it>
|
|
Fix a '/dev/kmsg' reference which got replaced with '/proc/kmsg' (which
is not accessible to regular users).
Fixes: a03ef333fbd6 ("Documentation: security-bugs: explain what is and is not a security bug")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260819134039.286793-1-johan@kernel.org>
|
|
The current link http://kernel.dk/blk-mq.pdf leads to a 404 error page.
https://www.kernel.dk/blk-mq.pdf leads to the correct document.
v2 to add the missing www. prefix in the actual file change.
Signed-off-by: Jenson Johnathon Reggentin <mail@jregg.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260819192422.42189-1-mail@jregg.de>
|
|
Translate the Acked-by:, Cc:, and Co-developed-by: section into Japanese.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Acked-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260730130030.1078990-1-weibu@redadmin.org>
|
|
In misc cgroup, misc.events does not output a simple "max" key. Instead,
each registered misc resource outputs a separate key suffixed with ".max"
(i.e., "<res>.max").
Update the documentation to clarify that the entry key is "<res>.max".
Suggested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Cheng Lingfei <chenglingfei@foxmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 7.3
- Add support for 'slot' based PMU events, paired with new UAPI that
compels the user to select a specific PMU implementation
- Lazy save/restore of vCPU state for pKVM, along with various fixes
and cleanups to the management of vCPU state between the untrusted
host and pKVM hypervisor
- Disable traps of EL1 registers for nested hypervisors when FEAT_NV2p1
is present, guaranteeing that EL2-specific register bits are stateful
in the EL1 counterpart
- Leverage FEAT_NV3 to avoid unnecessary ERET/TLBI traps when the scope
of those instructions remains 'in host' (i.e. L1 kernel/userspace)
- Pile of fixes for the management of the VNCR pseudo-TLB, such as
under-invalidations and races with concurrent TLBIs on other vCPUs
- Consolidate the non-protected and pKVM view of ICH_VTR_EL2 to a
runtime-patched constant, allowing the same data to be shared with
pKVM prior to dropping host privileges
- Considerable pile of LLM-assisted fixes around the shop but mostly in
the VGIC, our in-kernel generator of bugs (and sometimes interrupts)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Use the non-blocking mux_state_try_select() in the generic MUX pin
control back-end
- Free pin maps on pinctrl_generic_to_map() failure in the core
helpers
New hardware pin control:
- Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
(this is for the low power audio, LPASS = Low Power Audio SubSystem
portions)
- Upboard support on top of the Intel pin controller
- Apple T6030 and T6031 support (just compatible strings)
- Samsung Exynos 8855 SoC
- Mediatek MT6858 SoC
- Rockchip RK3308B and RV1106 SoCs
- Airoha EN7523 and AN7563 SoCs
Improvements:
- Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable
- Qualcomm improvements on top of the Qualcomm PDC (power domain
controller) irqchip improvements from tglx:s tree
- Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups
- The NPCM8xx driver has been put into shape fixing many pin and
group definitions
- Some non-urgent Tegra 264 pin assignments are fixed up
- Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
pin assignments, missing features etc"
* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
pinctrl: meson: sync some modify from A4
pinctrl: meson: a4: Add input enable pin configuration
pinctrl: realtek: rtd1625: remove unused group name spdif_sel
pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
Revert "Merge branch 'ib-rsk7204' into devel"
pinctrl: rockchip: Add RV1106 pinctrl support
dt-bindings: pinctrl: rockchip: Add RV1106 compatible
pinctrl: rockchip: Decode drive strength in the get function
pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
pinctrl: airoha: add support of an7563 SoC
dt-bindings: pinctrl: airoha: add support of an7563 pin controller
pinctrl: airoha: try to find chip scu node by phandle first
pinctrl: airoha: add support of en7523 SoC
dt-bindings: pinctrl: airoha: add support of en7523 pin controller
pinctrl: airoha: an7583: add support for olt pinmux
pinctrl: airoha: an7583: add support for pon_alt pinmux
pinctrl: airoha: an7583: add support for npu_uart pinmux
dt-bindings: pinctrl: airoha: an7583: add missed features
...
|
|
Merge series "mm/slab, alloc_tag: reduce obj_ext memory waste" from
myself. From the cover letter [1]:
It's been bothering me that the memory usage of struct slabobj_ext
depend only on config options and not whether the fields are actually
used. So with both CONFIG_MEMCG=y and CONFIG_MEM_ALLOC_PROFILING=y there
is always objcg field and codetag_ref field. And thus:
1) Having memory allocation profiling config-enabled but not
boot-enabled means wasted memory on unused codetag_refs. This makes
it less suitable for a general distro config and the page allocator
side doesn't suffer from this, only slab and percpu.
2) Complementary, with memory allocation profiling enabled, there are
caches/slabs that don't need the objcg field, so memory is wasted on
those.
This series should solve the point 1) fully for slab; pcpuobj_ext
handling can be perhaps improved similarly, haven't looked into that.
For 2) it avoids allocating objcg fields for KMALLOC_NORMAL and
KMALLOC_NO_OBJ_EXT caches where we know they are not necessary because
kmalloc() with __GFP_ACCOUNT will pick a KMALLOC_CGROUP type (except
with SLUB_TINY).
The named kmem_caches are tricky. They can be created with SLAB_ACCOUNT
and then we know objcg fields are always needed. But also they can be
created without SLAB_ACCOUNT and then some allocations have
__GFP_ACCOUNT and some not and we don't know that in advance.
This series introduces a SLAB_MAY_ACCOUNT flag that's currently internal
only and is applied to all caches (unless kmem accounting is disabled)
except KMALLOC_NORMAL (unless that aliases KMALLOC_RECLAIM) and
KMALLOC_NO_OBJ_EXT.
As a followup we can make SLAB_MAY_ACCOUNT explicit and add it to to
caches where we know __GFP_ACCOUNT is used. Then we could only honour
__GFP_ACCOUNT for those, while warning for an unexpected usage
elsewhere.
To check for regressions, I forward-ported a microbenchmark hacked into
slub_kunit that was used to evaluate sheaves.
Tried 3 scenarios, MEMCG and KFENCE were always enabled:
- CONFIG_MEM_ALLOC_PROFILING=n
- CONFIG_MEM_ALLOC_PROFILING=y but _ENABLED_BY_DEFAULT=n
- same but booted with sysctl.vm.mem_profiling=1
The results are quite noisy, but no regression was apparent, except
perhaps few percents for the last case. I don't expect it will be
visible in any real workloads.
Link: https://lore.kernel.org/all/20260727-b4-objext_split-v3-0-c29ef0f1f257@kernel.org/ [1]
|
|
Replace the earlier LeapRAID ncq_cmd_prio_enable attribute with the
standard sas_ncq_prio_supported and sas_ncq_prio_enable names documented in
Documentation/ABI/testing/sysfs-block-device, and rename the per-device NCQ
priority state to match.
The earlier ncq_cmd_prio_enable name has not yet been established as part
of a released userspace ABI, so no compatibility alias is needed.
For LeapRAID, sas_ncq_prio_enable is backed by the driver's per-device NCQ
priority state and controls whether RT-class I/O requests are issued with
command priority on supported SATA devices.
Update leapraid.rst to describe the standard attribute names and paths, and
clean up the surrounding RST text for consistency with kernel documentation
style.
Also switch the capability check from open-coded VPD page 0x89 parsing to
sas_ata_ncq_prio_supported(), use kstrtobool() for the enable path, and
expose the NCQ priority attributes only for SATA devices using LeapRAID's
target-private SAS device state.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Dongdong Hao <doubled@leap-io-kernel.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260814090526.395704-1-doubled@leap-io-kernel.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Changes for v7.3
Bindings:
- Added Shikra support
- Document a840, a704, a722
Core:
- Use drm_client buffers for fbdev emulation
- teardown fixes
- ARM32 DMA fixup
- Remove objects from evict list when re-validated
- Bunch of corner case and error path fixes
DPU:
- Dropped dev_pm_opp_set_rate(0) preventing burnout
- Fixed SSPP offsets of Kaanapali
DP:
- Dropped dev_pm_opp_set_rate(0) preventing burnout
- Cleaned up core code in preparation for MST support
- Fixed prepare() to let Pipewire continue in case of the unplugged cable
GPU:
- Add support for a704
- Add support for a722
HDMI:
- Simplifed register access
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV02Kp=J+w_RjEJbBbQnBYRb+SWdwMvVbCaAL70bq9EBagQ@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Paul McKenney:
"Make expedited grace periods expedite normal RCU callbacks
Miscellaneous fixes:
- Improve diagnostic output with character task states
- Mark accesses to inform KCSAN of concurrency design
- Move from kmalloc() to kmalloc_obj()
- Documentation updates
- Improve handling of RCU deferred quiescent states
- Clean up unused function arguments and structure fields
- Reduce show_rcu_gp_kthreads() stack space
Tasks RCU updates:
- Clean up after SRCU re-implementation of Tasks Trace RCU
- Mark accesses to inform KCSAN of concurrency design
- Add ->lazy_timer status to diagnostic output
- Remove an unnecessary memory barrier
- Fix a data race, courtesy of KCSAN
- Documentation updates
- Convert cond_resched_tasks_rcu_qs() from macro to static inline
function
SRCU updates:
- Add Rust helpers for SRCU
- Avoid losing queued work at cleanup_srcu_struct() time
Torture-test updates:
- Preparation work for immediate RCU priority deboosting
- Test RCU readers from real interrupt handlers (as opposed to
softirq)
- Simplify code through use of cpumask_next_wrap()
- Improve diagnostic output with character task states
- Add rcutorture.nwriters parameter to allow lightweight stall
testing, and rcutorture.stall_only to make doing so easier
- Test an RCU Tasks Trace grace period implying an RCU grace period
- Make RCU Tasks Trace torturing track reader batches
- Fix a data race, courtesy of KCSAN
- Plug a shuffle_tmp_mask memory leak on kthread spawn failure"
* tag 'rcu.2026.08.18a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (59 commits)
rcu: Add closing parenthesis in comment in rcu_read_unlock_strict()
rcutorture: Make {,s}rcu_read_delay() better handle forward-progress testing
rcutorture: Announce declining to forward-progress test
torture: Don't leak shuffle_tmp_mask when shuffler kthread fails to start
rcutorture: Use this_cpu_inc() for rcu_torture_count[] and rcu_torture_batch[]
rcutorture: Make RCU Tasks Trace track Reader Batches
rcutorture: Test RCU Tasks Trace GP implying RCU GP
rcutorture: Add a stall_only module parameter
rcutorture: Add nwriters module parameter
rcutorture: Use task_state_to_char() for task-state reporting
rcutorture: Use cpumask_next_wrap() in rcu_torture_preempt()
rcutorture: Test RCU readers from hardware interrupt handlers
rcutorture: Check for immediate deboosting at reader end
srcu: Queue sdp->work when the delay timer is successfully deleted
rcu-tasks: Convert cond_resched_tasks_rcu_qs() to static inline
rcu-tasks: Fix some comments for call_rcu_tasks() and call_rcu_tasks_rude()
rcu-tasks: Rename tasks_rcu_exit_srcu_stall_timer to tasks_rcu_exit_stall_timer
rcu: Mark interrupts-enabled accesses to rdp->cpu_no_qs.s
rcu: Reduce stack usage in show_rcu_gp_kthreads()
rcu: Mark accesses to ->rcu_urgent_qs and ->rcu_need_heavy_qs
...
|
|
Add a devicetree binding for the Axiado AX3005 mailbox controller.
The controller provides inter-processor communication channels
between the host CPU and the coprocessor, with separate TX and RX
register regions.
Add the corresponding MAINTAINERS entry covering the binding.
Signed-off-by: Swark Yang <syang@axiado.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull I3C updates from Alexandre Belloni:
"A new driver this cycle, for the AMD AXI I3C controller.
There are also new features such as IBI wakeup support, SETAASA device
discovery and ACPI support for the the DAA methods, meaning we can now
communicate with the SPD devices on DDR5 modules.
New driver:
- AMD AXI I3C master controller
Subsystem:
- I3C Common Command Code (CCC) handling improvements, especially
around GET CCCs
- SETAASA device discovery support
- ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
well as I2C devices on I3C bus
- IBI-based wakeup support
Drivers:
- dw: SETAASA support
- mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
controller support, PIO queue management support for HCI v1.2
- renesas: improve suspend to RAM support, add runtime PM support"
* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
i3c: dw: reduce do_daa time if there's no client
i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
i3c: dw: rename "pclk" to "apb" to match dt-binding
i3c: dw: make struct dw_i3c_cmd smaller
i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
i3c: renesas: Don't register devices when ENTDAA times out
i3c: master: dw-i3c-master: fix OD timing for first broadcast
i3c: mipi-i3c-hci: Advertise IBI wakeup capability
i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
i3c: master: Reject IBI requests from non-IBI-capable devices
i3c: master: Add helper to query bus wakeup requirements
i3c: master: Report wakeup events for IBIs
i3c: master: Support IBI-based wakeup capability
i3c: master: Fix potential UAF in i3c_device_match()
i3c: master: Fix potential UAF in i3c_device_uevent()
i3c: Make dev->desc locking assumptions explicit
i3c: master: Fix use-after-free of master->this
...
|
|
The old Coccinelle project URL is no longer available. Replace it with
the current Coccinelle homepage already referenced by
Documentation/dev-tools/coccinelle.rst.
Signed-off-by: Akira Aiura <akira.aiura.bj@hitachi.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Resource management:
- Add hotplug reservation only once (not at each level of the
hierarchy) so bridge windows don't grow more than necessary (Ilpo
Järvinen)
Driver binding:
- Rework device matching so device ID lifetime only needs to cover
the probe path since dynamic IDs can be removed at any time (Gary
Guo)
Error handling:
- Update mappings of AER errors to agent & layer and log them for
each individual error when multiple errors detected (Lukas Wunner)
- Log Error Source only once, not twice in separate messages (Lukas
Wunner)
- Emit TLP Log only for unmasked errors (Lukas Wunner)
- Support Advisory Non-Fatal Errors (Lukas Wunner)
- Allow DPC on all Downstream Ports, not just Root Ports, when OS
controls AER (Darshit Shah)
ASPM:
- Program the same ASPM Control values for every function of
multi-function devices, as recommended by the PCIe spec (Krishna
Chaitanya Chundru)
- Avoid L0s for Realtek RTS525A, where it causes an AER interrupt
storm (Max Lee)
- Avoid ASPM L0s, L1, and L1 PM Substates based on 'aspm-no-l0s',
'aspm-no-l1' [1], and 'aspm-no-l1ss' DT properties (Krishna
Chaitanya Chundru)
Power management:
- Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
(we avoid D3 for these ports on x86 because some old platforms
didn't validate it) (Manivannan Sadhasivam)
- Allow portdrv to claim Ports even if they don't support services
(AER, PME, DPC, hotplug, etc) so it can do power management (Brian
Norris)
Power control:
- Add support for PCIe WAKE# interrupt when described via DT (Krishna
Chaitanya Chundru)
- For the TC9563 PCIe switch:
- Take a reference on the I2C adapter to avoid uninterruptible
hang when unloading an I2C module while in-use (Johan Hovold)
- Update DT binding and driver to restrict Tx Amplitude, DFE and
N_FTS to USP, DSP1 and DSP2 (Manivannan Sadhasivam)
- Power off only external-facing ports (DSP1, DSP2), leaving USP
and DSP3 (aka VDSP) powered up (Manivannan Sadhasivam)
- Move integrated MAC Endpoint out of the list of internal ports
and configure it separately (Manivannan Sadhasivam)
Virtualization:
- Add ACS quirk for Pericom PI7C9X2G608 switches (Tim Harvey)
- Fix a long-standing bug in the Intel PCH Root Port MPC ACS quirk
that didn't update the intended INTEL_MPC_REG_IRBNCE bit because it
used a 16-bit config write when a 32-bit write was intended
(Mohamad Raizudeen)
Procfs:
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Warn on user-space writes to kernel-exclusive config space regions,
as we already do for sysfs (Krzysztof Wilczyński)
- Check credentials of opener, not reader, for config space reads, as
we already do for sysfs (Krzysztof Wilczyński)
Sysfs:
- In pci_write_legacy_io(), avoid out-of-bounds reads from the user
buffer and fix incorrect ioport write data (1-byte writes on
little-endian powerpc, 2- and 4-byte writes on big-endian powerpc)
(Krzysztof Wilczyński)
- In pci_read_legacy_io(), fix incorrect ioport read data for 2- and
4-byte reads on big-endian powerpc (Krzysztof Wilczyński)
- Fix I/O port accessor argument order in Alpha pci_legacy_write()
(Krzysztof Wilczyński)
- Avoid spurious runtime PM wakeup on config space accesses that are
outside config space and fail before reaching PCI (Krzysztof
Wilczyński)
- Return -EINVAL, not -ENODEV, for mmap of I/O BAR that fails because
the arch doesn't support it, as we do for procfs (Krzysztof
Wilczyński)
- Check for LOCKDOWN_PCI_ACCESS for legacy_io and legacy_mem, as we
do for other config space accessors (Krzysztof Wilczyński)
Peer-to-peer DMA:
- Add Nvidia Vera Rubin to list of platforms that support P2PDMA
(Leon Romanovsky)
Endpoint framework:
- Check doorbell SUCCESS bit in pci_endpoint_test to avoid treating
some failures as successes (Niklas Cassel)
- Fail doorbell test when the trigger IRQ is missed (Niklas Cassel)
New native PCIe controller drivers:
- Add DT binding and driver for NVIDIA Tegra264 (Thierry Reding)
Native PCIe controllers:
- Use common wait time definitions for PCIe link monitoring instead
of defining driver-private duplicates (Thierry Reding)
Generic host bridge driver:
- Fix NULL pointer dereference that caused enumeration failures on
32-bit CAM systems (Steffen Persvold)
Amlogic Meson PCIe controller driver:
- Correct the PERST# GPIO state so it remains asserted until power
and REFCLK become stable to fix enumeration failure (Ronald
Claveau)
ASPEED PCIe controller driver:
- Switch to irq_domain_create_linear() so we can obsolete
irq_domain_add_linear() (Jiri Slaby)
Cadence PCIe controller driver:
- Add MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)
- Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
controllers (Hans Zhang)
- Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)
- Fix host/endpoint dependencies for cadence-plat driver to fix link
error when cadence-plat is built-in but the host or endpoint driver
is modular (Aksh Garg)
Freescale i.MX6 PCIe controller driver:
- Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu)
- Remove PERST# checking from pci_host_common_parse_port() so callers
can decide whether to fall back to legacy DT binding with PERST# in
the host bridge (Sherry Sun)
- Fix build issues when PCI_PWRCTRL_GENERIC or PCI_HOST_COMMON is a
module (Arnd Bergmann)
- Create pwrctrl devices only once by doing it from imx_pcie_probe()
instead of imx_pcie_host_init(), which is used during both probe
and resume (Sherry Sun)
- Use 'dw_pcie_rp->skip_pwrctrl_off' to avoid powering off devices
during suspend to preserve wakeup capability (Sherry Sun)
- Add runtime PM support for i.MX95 to allow dynamic power management
when the link is idle (Richard Zhu)
Intel VMD host bridge driver:
- Support device ID 0x28C1 and assume that BIOS has already
enumerated the hierarchy below VMD and stored bus range info for OS
to use (Nirmal Patel)
- Add support for VMCONFIG BUS_RESTRICT_CFG=3, which makes it
possible to enumerate downstream devices on Intel Arrow Lake-HX
systems and probably others (Ali Alaei)
- Pay attention to _OSC negotiation for VMD hierarchy only when
running on bare metal, not when running in a VM (Nirmal Patel)
- Add Nova Lake (NVL) and Dunlow (DNL) Device IDs (Szymon Durawa)
MediaTek PCIe controller driver:
- Add support for PCIe controller in EcoNet EN7528 and EN751221 SoCs
(Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Add mediatek-gen3 'memory-region' for restricted DMA buffer
(Chen-Yu Tsai)
NVIDIA Tegra264 PCIe controller driver:
- Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
controllers so the unit address matches the first 'reg' entry
(Thierry Reding)
- Add Tegra264 Root Port stanzas to prepare for generic WAKE#
handling (Thierry Reding)
Qualcomm PCIe controller driver:
- Add IPQ9650 compatible with global interrupt (Kathiravan
Thirumoorthy)
- Add IPQ5210 compatible with IPQ9574 fallback (Varadarajan
Narayanan)
- Add DT binding and driver support for Hawi SoC (Matthew Leung)
- Skip PERST# GPIOs provided by downstream PCIe devices, which should
be handled by drivers of those devices (Manivannan Sadhasivam)
- Stop advertising Attention Button Present (no Qcom SoCs support
Attention Buttons) so pciehp can use Presence Detect Changed events
(Qiang Yu)
Renesas R-Car PCIe controller driver:
- Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek
Vasut)
- When MSI is enabled but iMSI-RX is not used, configure AXIINTC to
allow GIT ITS to handle MSI (Marek Vasut)
- Refactor GIC600 implementation to make it easier to add platforms
that only support 32-bit addressing (Marek Vasut)
- Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600
integrations that only support 32-bit addressing (Marek Vasut)
Renesas RZ/G3S PCIe controller driver:
- Add DT binding and driver support for RZ/V2H(P) SoC, which contains
two PCIe controllers, configured either as a single x4 link or two
independent x2 link controllers (Lad Prabhakar)
SpacemiT K1 PCIe controller driver:
- Add missing MODULE_DEVICE_TABLE() to generate module alias info for
OF-based module autoloading (Pengpeng Hou)
StarFive PCIe controller driver:
- Fix resource leaks on error paths in host_init() (Ali Tariq)
- Fix runtime PM handling and teardown ordering to avoid register
access while power or clocks are disabled (Ali Tariq)
- Check for runtime PM resume failure to avoid register access while
power or clocks are disabled (Ali Tariq)
Synopsys DesignWare PCIe controller driver:
- Add LECARC PMU IDs to the DWC RAS/DES VSEC list so it can take
advantage of the existing debugfs support for silicon debug, error
injection, and event counters (Brett Zhou)
- Factor pcie_valid_speed() and pci_bus_speed2lnkctl2() out of bwctrl
so they can be shared by the DWC core (Hans Zhang)
- Flush MSI writes from endpoint before unmapping the iATU, as we
already do for MSI-X writes (Niklas Cassel)
- Unmap MSI iATU window before mapping MSI-X window, to avoid a
subsequent MSI write using a disabled aperture and losing the
interrupt (Niklas Cassel)
- Change endpoint .pre_init() and .init() callbacks to return errors
and handle them (Marek Vasut)
UltraRISC PCIe controller driver:
- Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them
in the driver (Jia Wang)
- Use module_platform_driver() since this may be built as a module,
though not removable because IRQs can't be safely disposed (Jia
Wang)
MicroSemi Switchtec management driver:
- Add Microchip PCI1008 device ID and include it in NTB DMA alias
quirk (Logan Gunthorpe)
Miscellaneous:
- Document how to write PCI Host Controller drivers (Manivannan
Sadhasivam)
- Fix typos in documentation (D'Orus Tsitera)
- Use %pe format specifier to print error pointers so we get symbolic
errname when available (Krzysztof Wilczyński)"
* tag 'pci-v7.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (124 commits)
PCI: vmd: Add Nova Lake (NVL) and Dunlow (DNL) Device IDs
PCI: tegra264: Add Tegra264 support
dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
PCI/AER: Support Advisory Non-Fatal Errors
PCI: Fix 32-bit config write in Intel PCH Root Port MPC ACS quirk
PCI: dwc: Handle return value from endpoint .pre_init callback
PCI: dwc: Handle return value from endpoint .init callback
PCI: dwc: Add PCI ID for LECARC PCIe PMU
PCI/ASPM: Mask ASPM states based on Devicetree properties
PCI/ASPM: Disable/restore ASPM on every function for multi-function devices
Documentation: PCI: Document how to write PCI Host Controller drivers
PCI/ASPM: Use pcie_capability_clear_and_set_word() for ASPM disable/restore
PCI: Add support for PCIe WAKE# interrupt
PCI: Allow D3 for native hotplug-capable Root Ports on non-x86 platforms
dt-bindings: PCI: Correct white-space style
PCI/ASPM: Avoid L0s for Realtek RTS525A
PCI: ultrarisc: Use module_platform_driver()
PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
...
|
|
Add compatible strings for the RTC block found on the Renesas RZ/T2H
(R9A09G077) and RZ/N2H (R9A09G087) SoCs.
These SoCs integrate a closely related variant of the RZ/N1 RTC IP.
Unlike RZ/N1, they do not implement the RTCA0SUBU register. This is
not a limitation for Linux support, as these registers are not used
when the RTC operates in "scmp" clock mode, which is required on
RZ/T2H and RZ/N2H due to their 195.3 kHz input clock.
The RZ/T2H RTC variant also supports a 1Hz output signal on the
RTCAT1HZ pin, controlled by the RTCA0CTL1[RTCA01HZE] bit. This bit is
marked as reserved in the RZ/N1 hardware manual.
Update the binding schema to require the additional clock inputs used by
these SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20260821211032.13554-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"Raw NAND changes:
- Sunxi: Support added for the H616 compatible
- Qcom: Support added for the MDM9607 compatible
- Support for the Toshiba TC58NVG1S3H part
- GPMI: New debugfs entry to expose the chip geometry
- PL353: Timing updates and software ECC support have been fixed
SPI NAND changes:
- fmsh: Support added for FM25G{01,02}B chips
- HeYangTek: Support added for HYF1GQ4UDACAE
Aside from these main changes, there is a high load of misc fixes and
hardening changes, and exceptionally no SPI NOR change"
* tag 'mtd/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (30 commits)
mtd: rawnand: sunxi: fix H6/H616 controller timings
mtd: rawnand: sunxi: describe tADL and tWHR delays
mtd: rawnand: sunxi: group controller delay tables
mtd: maps: remove dead select of MTD_CFI_BE_BYTE_SWAP
mtd: rawnand: gpmi: add debugfs entry for BCH geometry
mtd: rawnand: validate ONFI extended parameter page sections
mtd: rawnand: sunxi: add H616 MBUS DMA support
mtd: spinand: fmsh: fix FM25G01B/FM25G02B Quad I/O read dummy cycles
mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition()
mtd: mpc5121_nfc: use platform for irq and ioremap
mtd: mtdoops: free page bitmap when the backing MTD is removed
mtd: mtdswap: Avoid freeing registered blktrans device twice
mtd: afs: validate v2 image info bounds
mtd: intel-dg: Fix runtime PM error path in probe
mtd: nand-omap2: Move omap_nand_ids[] to raw nand driver
mtd: rawnand: add Toshiba TC58NVG1S3H
mtd: nand: realtek-ecc: add missing MODULE_DEVICE_TABLE()
mtd: rawnand: qcom: Add MDM9607 compatible
mtd: rawnand: qcom: Make has_onfi_read_op separate from qpic_version2
mtd: rawnand: qcom: Make "aon" clock optional
...
|
|
The default behavior of sticky check now becomes what
QUIRK_FLAG_MIXER_GET_CUR_BROKEN originally does, so the quirk flag is no
longer needed.
On some devices, whether their GET_CUR being sticky depends on whether
hotpluggable components are present. When the hotpluggable components
are missing on probe, their GET_CUR behavior is classified as broken.
Therefore, reverse QUIRK_FLAG_MIXER_GET_CUR_BROKEN as
QUIRK_FLAG_MIXER_GET_CUR_OK, so that it can be set to prevent the
heuristics from gating GET_CUR.
Note that even if the quirk flag is set, init_cur_mix_raw() should still
initialize the mixer value to cval->min, otherwise restoring the bogus
saved value on the first channel could lead to unbalanced channels.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260823-uac-demote-sticky-check-v1-3-a8cbe572edff@rong.moe
|
|
QUIRK_FLAG_ALWAYS_SET_RATE was introduced into usb-audio before without
appropriate documentation, so add it.
There is an odd colon in its comments, so remove it too.
As this is often forgotten, also add a reminder to the end of the
enumeration.
Fixes: 786f91da8535 ("ALSA: usb-audio: add QUIRK_FLAG_ALWAYS_SET_RATE for Mackie DLZ Creator XS")
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260823-uac-demote-sticky-check-v1-1-a8cbe572edff@rong.moe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf c2c:
- Add 'function view' in perf c2c report TUI (switched by pressing
'TAB' in the cacheline view) to organize samples around functions
rather than cachelines in 3-level hierarchy:
Level 1: Read-side function (sorted by estimated Cycles %)
Level 2: Contending writer functions (sorted by Store count)
Level 3: Shared cacheline addresses
Users can navigate the entries and fold/unfold using 'e' key. An
example output would look like below:
Shared Data Functions Table (19 entries, sorted on Cycles %)
Cycles Store
% count Function / Contending function / Cacheline
----------------------------------------------------------------------
+ 35.67% 876 + [k] cpupri_set
+ 24.31% 424 + [k] pull_rt_task
- 16.53% 555 - [k] dequeue_pushable_task
145 - [k] pull_rt_task
145 0xff2d0082809da080
139 - [k] enqueue_pushable_task
70 0xff2d00a2071f9640
69 0xff2d0082809da000
python module support:
- Extend "perf" python module so that it can be fully functional. The
goal is to run scripts directly, not by 'perf script' command. This
would give better performance as well as more control to build
standalone programs with UI.
- Add LiveSession helper (perf_live.py) to enable live event
collection directly from Python using perf.evlist and
perf.parse_events.
perf stat:
- Add --hide-zero-events option to suppress zero-count events
- Reject conflicting --field-separator and --json-output options
- Fix duplicate event output with --for-each-cgroup
perf sched latency:
- Add -H/--histogram and --hist-mode (log|linear) options to show
scheduler wait latency histograms
- Add --time option to filter analysis by time span in 'perf sched
latency'
ARM CoreSight:
- Synthesize callchains for instruction samples from CoreSight trace
using thread stack ('--itrace=g...')
- Support call indentation ('perf script -F +callindent') to display
call depth hierarchy on branch samples
- Decode ETE (Embedded Trace Extension) exception packets
Build system:
- Add 'make install-build-deps' target to install required packages
- Parallelize JSON and metric pre-computation in jevents.py for
faster builds
Vendor event/metric updates:
- Add Intel Nova Lake events and update tables for existing models
- Update AMD Zen 5 and Zen 6 core events
- Update Arm64 Tegra410 metrics and PowerPC hcalls
Internal changes and fixes:
- Harden trace-event and synthetic event parsing against corrupted
data
- Fix unwinding of multi-threaded processes in libdw unwinder
- Fix memory leaks in various commands and python bindings
- Speed up 'perf test' shell tests"
* tag 'perf-tools-for-v7.3-2026-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (232 commits)
perf vendor events arm64: Fix Tegra410 Olympus event 0x0197
perf vendor events arm64: fix swapped MetricGroup for Tegra410 L1 prefetcher metrics
perf evlist: Warn when 'sleep' workload is used without system-wide (-a) option
perf c2c: document function view in perf-c2c man page
perf c2c: add function view browser UI and cacheline detail
perf c2c: build and finalize the function view hierarchy
perf c2c: add function view hierarchy entry creation
perf c2c: add function view stats merge and memory management
perf c2c: add HPP list parsing for function view columns
perf c2c: add column rendering for function view
perf c2c: add function view model skeleton
perf c2c: extract shared data structures into util/c2c.h
perf test sample-parsing: Validate PERF_FORMAT_GROUP values without LOST
perf dso: Replace assert with runtime check in dso__read_symbol()
perf dso: Guard against cache underflow on short reads in dso_cache__memcpy()
perf dso: Use stored fd error instead of stale errno in file_read() and file_size()
perf dso: Guard close() against invalid fd in dso__decompress_kmodule_path()
perf dso: Guard against errno==0 when dso__get_filename() returns NULL
perf build: install-build-deps: add RHEL family devel package mapping
perf build: Remove leftover feature tests for removed cxx and clang support
...
|
|
Under heavy workloads or during background GC/fallocate operations,
nat_tree_lock can experience high lock contention between background
readers (e.g. f2fs_get_node_info() in gc_data_segment) and writers
(e.g. flush_nat_entries, set_node_addr, shrinker).
[375067.327986][T13777] schedule+0x4c/0x114
[375067.327997][T13777] f2fs_get_node_info+0x438/0x5c4
[375067.328002][T13777] f2fs_get_inode_page+0x1e0/0x3f0
[375067.328013][T13777] f2fs_iget+0x88/0x1180
[375067.328024][T13777] f2fs_lookup+0x168/0x3a8
[375067.328035][T13777] path_openat+0xa28/0x1b04
[375067.328046][T13777] do_filp_open+0xac/0x130
[375067.328056][T13777] do_sys_openat2+0x140/0x21c
[375067.328066][T13777] __arm64_sys_openat+0x70/0x9c
[375067.330299][T13777] schedule+0x4c/0x114
[375067.330310][T13777] schedule_preempt_disabled+0x24/0x40
[375067.330321][T13777] rwsem_down_write_slowpath+0x3b4/0x9d0
[375067.330332][T13777] down_write+0x98/0x170
[375067.330343][T13777] set_node_addr+0x74/0x4b4
[375067.330354][T13777] f2fs_new_node_page+0xb0/0x280
[375067.330444][T13777] f2fs_new_inode_page+0x3c/0x64
[375067.330455][T13777] f2fs_init_inode_metadata+0x4c/0x47c
[375067.330461][T13777] f2fs_add_regular_entry+0x258/0x5b8
[375067.330471][T13777] f2fs_add_dentry+0x100/0x158
[375067.330476][T13777] f2fs_do_add_link+0x84/0x140
[375067.330487][T13777] f2fs_create+0xec/0x250
[375067.331759][T13777] schedule+0x4c/0x114
[375067.331770][T13777] f2fs_down_read+0x9c/0xc4
[375067.331781][T13777] f2fs_need_inode_block_update+0x20/0x10c
[375067.331792][T13777] f2fs_do_sync_file+0x478/0x830
[375067.331802][T13777] f2fs_sync_file+0x2c/0x40
This patch converts nat_tree_lock to use the f2fs_{down,up}_{read,write}_trace
infrastructure.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add binding document for the haptics module inside Qualcomm PMIC
PMIH0108.
Assisted-by: Claude:claude-4-8-opus
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Link: https://patch.msgid.link/20260806-qcom-spmi-haptics-v6-1-19fcecd5204f@oss.qualcomm.com
[robh: Drop example]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
- Fix typos in documentation (D'Orus Tsitera)
- Use %pe format specifier to print error pointers so we get symbolic
errname when available (Krzysztof Wilczyński)
* pci/misc:
PCI: Use %pe format specifier to print error pointers
Documentation: PCI: Fix sysfs-bus-pci typo
|
|
- Distinguish Tegra264 C0 PCIe controller for internal GPU from C1-C5
controllers so the unit address matches the first 'reg' entry (Thierry
Reding)
- Add Tegra264 Root Port stanzas to prepare for generic WAKE# handling
(Thierry Reding)
- Add NVIDIA Tegra264 driver (Thierry Reding)
* pci/controller/tegra264:
PCI: tegra264: Add Tegra264 support
dt-bindings: PCI: tegra264: Switch to PCIe Root Port bindings
dt-bindings: PCI: tegra264: Strictly distinguish C0 from C1-C5
|
|
- Add DT binding and driver support for RZ/V2H(P) SoC, which contains two
PCIe controllers, configured either as a single x4 link or two
independent x2 link controllers (Lad Prabhakar)
* pci/controller/rzg3s-host:
PCI: rzg3s-host: Add support for RZ/V2H(P) SoC
PCI: rzg3s-host: Prepare System Controller handling for multiple controllers
PCI: rzg3s-host: Use shared reset controls for power domain resets
dt-bindings: PCI: renesas,r9a08g045-pcie: Add RZ/V2H(P) support
|
|
- Add 'core', 'dbi', and 'aux' clocks to DT binding and manage them in the
driver (Jia Wang)
- Use module_platform_driver() since this may be built as a module, though
not removable because IRQs can't be safely disposed (Jia Wang)
* pci/controller/dwc-ultrarisc:
PCI: ultrarisc: Use module_platform_driver()
PCI: ultrarisc: Get and enable DP1000 PCIe controller clocks
dt-bindings: PCI: ultrarisc: Add required DP1000 PCIe clocks
|
|
- When MSI is enabled but iMSI-RX is not used, configure AXIINTC to allow
GIT ITS to handle MSI (Marek Vasut)
- Refactor GIC600 implementation to make it easier to add platforms that
only support 32-bit addressing (Marek Vasut)
- Add Renesas R-Car Gen4 S4/V4H/V4M to the list of GIC600 integrations that
only support 32-bit addressing (Marek Vasut)
* pci/controller/dwc-rcar-gen4:
irqchip/gic-v3: Add Renesas R-Car Gen4 erratum workaround
irqchip/gic-v3: Refactor GIC600 limited to 32bit PA erratum handling
PCI: rcar-gen4: Configure AXIINTC if iMSI-RX is not used
PCI: dwc: Move iMSI-RX check before calling 'pp->ops->init()'
|
|
- Add DT binding and driver support for Hawi SoC (Matthew Leung)
- Skip PERST# GPIOs provided by downstream PCIe devices, which should be
handled by drivers of those devices (Manivannan Sadhasivam)
- Stop advertising Attention Button Present (no Qcom SoCs support Attention
Buttons) so pciehp can use Presence Detect Changed events (Qiang Yu)
* pci/controller/dwc-qcom:
PCI: qcom: Clear Attention Button Present in Slot Capabilities
PCI: qcom: Rename qcom_pcie_set_slot_nccs() to qcom_pcie_set_slot_cap()
PCI: qcom: Skip PERST# GPIOs provided by downstream PCIe devices
PCI: qcom: Add support for Hawi
dt-bindings: PCI: qcom: Document Hawi and Maili PCIe Controllers
|
|
- Add missing MODULE_DEVICE_TABLE to generate module aliases for OF-based
module autoloading (Pengpeng Hou)
- Add debugfs 'ltssm_status' file for LGA- and HPA-based Cadence
controllers (Hans Zhang)
- Support up to x4 (not x2) lanes for J200 (Takuma Fujiwara)
- Fix host/endpoint dependencies for cadence-plat driver to fix link error
when cadence-plat is built-in but the host or endpoint driver is modular
(Aksh Garg)
* pci/controller/cadence:
PCI: cadence: Fix host/endpoint dependencies for cadence-plat driver
PCI: j721e: Fix incorrect max_lanes for J7200
PCI: cadence: Add LGA IP debugfs for LTSSM status
PCI: cadence: Add HPA IP debugfs for LTSSM status
PCI: cadence: Add HPA architecture flag
PCI: cadence: Add missing MODULE_DEVICE_TABLE()
|
|
- Add qcom IPQ9650 compatible with global interrupt (Kathiravan
Thirumoorthy)
- Add qcom IPQ5210 compatible with IPQ9574 fallback (Varadarajan Narayanan)
- Add imx6 intr/aer/pme interrupt lines for i.MX95 (Richard Zhu)
- Add mediatek-gen3 'memory-region' for restricted DMA buffer (Chen-Yu
Tsai)
- Add rcar-gen4-pci-host optional 'msi-parent' for GIT ITS (Marek Vasut)
- Correct some white-space issues (Krzysztof Kozlowski)
* pci/dt-binding:
dt-bindings: PCI: Correct white-space style
dt-bindings: PCI: rcar-gen4-pci-host: Document optional msi-parent
dt-bindings: PCI: mediatek-gen3: Allow memory-region for restricted DMA buffer
dt-bindings: PCI: mediatek-gen3: Add support for MT8189 SoC
dt-bindings: PCI: imx6q-pcie: Add i.MX95 optional intr/aer/pme interrupts
dt-bindings: PCI: qcom,pcie-ipq9574: Add IPQ5210 compatible
dt-bindings: PCI: qcom,pcie-ipq9574: Add IPQ9650 compatible
|
|
- Take a reference on the I2C adapter in tc9563 to avoid uninterruptible
hang when unloading an I2C module while in-use (Johan Hovold)
- Restrict tc9563 Tx Amplitude, DFE and N_FTS to USP, DSP1 and DSP2 in DT
binding (Manivannan Sadhasivam)
- Fix parsing tc9563 integrated Ethernet MAC Endpoint node (Manivannan
Sadhasivam)
- Power off only tc9563 external-facing ports (DSP1, DSP2), leaving USP and
DSP3 powered up (Manivannan Sadhasivam)
- Skip tc9563 Tx amplitude and DFE tuning for DSP3, which don't support
them (Manivannan Sadhasivam)
- Move integrated MAC Endpoint out of the list of internal ports and
configure it separately (Manivannan Sadhasivam)
* pci/pwrctrl:
PCI/pwrctrl: tc9563: Move Integrated MAC Endpoint out of 'tc9563_pwrctrl_ports' enum
PCI/pwrctrl: tc9563: Rename DSP3 to VDSP
PCI/pwrctrl: tc9563: Skip Tx amplitude and DFE tuning for DSP3
PCI/pwrctrl: tc9563: Power off only the external ports in tc9563_pwrctrl_disable_port()
PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node
dt-bindings: PCI: toshiba,tc9563: Restrict Tx Amplitude, DFE and N_FTS to USP, DSP1 and DSP2
PCI/pwrctrl: tc9563: Take i2c adapter module reference
|
