| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Newer FW reports the SD group size directly in the NIC vport context
via the sd_group_size field, gated by the sd_group_size capability.
Switch sd_init() to source the group size from there and fall back to
the MPIR-based host_buses query only when the cap is absent.
sd_group_size might return 1 in some FW configuration. Add explicit
check to disable SD creation in this case.
While here, rename host_buses to group_size throughout sd.c to follow
the new name on capable FW.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260810093037.3138197-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net
This includes an enhancement to detect ct memleaks easier via
DEBUG_NET and flowtable preparation patches for IPv4 over IPV6
and vice-versa. This also includes a fix for the nft_ct custom
expectation support.
1) Add DEBUG_NET_WARN_ON_ONCE to nf_ct_set() to spot ct memleaks.
2) Pass struct net_device_path_ctx to dev_fill_forward_path() to
make it easier to pass more parameters to this function.
From Lorenzo Bianconi.
3) Add ether_type field to net_device_path context structucture.
4) Rename tun.l3_proto field to tun.inner_proto.
5) Rename ctx.tun.proto to ctx.tun.inner_proto.
6) Store ether_type in flowtable context.
7) Move IPv4 and IPv6 xmit path to a helper function.
8) Move encapsulation header parser out of the flowtable lookup
function.
9) Rework nft_ct custom expectation support to address a possible
reallocation of ct extension area while expectation list also
contains expectations. Move datapath to a ct helper to fix it.
10) Ensure timeout is always lowered for the non-closing RST case
in the TCP connection tracking.
11) Bail out when inserting already dead expectation, this should
not ever happen, hence report it via DEBUG_NET.
12) Comestic updates for improving the conntrack selftest dump and
flush userspace program, from Qingshuang Fu.
* tag 'nf-next-26-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: conntrack_dump_flush: remove unused variables and fix typo
netfilter: nf_conntrack_expect: bail out on insert dead expectations
netfilter: conntrack: always lower timeout for non-closing RST packets
netfilter: nft_ct: move custom expectation support to helper
netfilter: flowtable: detach layer 2 encapsulation parser from lookup
netfilter: flowtable: move ipv4 and ipv6 xmit path to function
netfilter: flowtable: store ethertype in flowtable context
netfilter: flowtable: rename ctx.tun.proto to ctx.tun.inner_proto
netfilter: flowtable: rename tun.l3_proto to tun.inner_proto
net: netfilter: add ether_type to net_device_path_ctx and use it
net: pass net_device_path_ctx to dev_fill_forward_path()
netfilter: add DEBUG_NET_WARN_ON_ONCE to skb_set_nfct()
====================
Link: https://patch.msgid.link/20260810194015.932627-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
scx_fork() initializes tasks when scx_init_task_enabled is set, but
scx_cancel_fork() only exits them when scx_enabled() is true. A fork
that fails in the enable window (between releasing scx_fork_rwsem and
setting __scx_enabled) runs ops.init_task() but never ops.exit_task().
Gate scx_cancel_fork() on scx_init_task_enabled.
Fixes: 4269c603cc26 ("sched_ext: Enable scx_ops_init_task() separately")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: fangqiurong <fangqiurong@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The acpi_battery_get_property() callback calls acpi_battery_get_state()
without any lock held. On some devices, it happens that the property
cache has expired before a uevent reaches userspace, triggering
simultaneous attempts to evaluate _BST. See [1] for an analysis to sysrq
stacktraces on one of the these devices.
In a few cases, including when the AML is sleeping or acquiring a mutex,
ACPICA drops the namespace and interpreter locks and allows the
evaluation of _BST to start while another task is still evaluating it.
This could somehow confuse the interpreter and lead to chaos in AML
mutexes on some devices, see [2] for an example.
Not holding the lock is also prone to race conditions, for example:
CPU0 | CPU1
acpi_battery_get_property() |
acpi_battery_get_state() |
[update_time expired] |
extract_package() | acpi_battery_get_property()
battery->update_time = jiffies | acpi_battery_get_state()
kfree() | [up to date]
| [read capacity_now]
[fix capacity_now due to quirk] |
where CPU1 gets raw capacity_now before CPU0 fixes it to a meaningful
value.
The existing mutex update_lock is not applicapable for
acpi_battery_get_property(), as some code path could call or wait for
acpi_battery_get_property() while holding update_lock.
Therefore, introduce a mutex called property_lock to protect all
accesses to battery properties, so that acpi_battery_get_property() can
take the advantage of the mutex and synchronize itself. With the mutex,
acpi_battery_get_state() are synchronized in all code paths calling it,
and its cache mechanism can always clamp the frequency of _BST
evaluations according to cache_time.
The helper function acpi_battery_handle_discharging() for quirky devices
has to be inlined due to the change, as the mutex must be unlocked
before calling the expensive power_supply_is_system_supplied() helper
function.
Fixes: 86bfd21a0baf ("ACPI: battery: Drop redundant locking")
Reported-by: Rick <rickk1166@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221065#c85 [1]
Reported-by: Avraham Hollander <anhollander516@gmail.com>
Tested-by: Avraham Hollander <anhollander516@gmail.com>
Closes: https://lore.kernel.org/linux-acpi/CAP1mzZReJCn6df5DwEPu-JCQUyr=Pu1cg5xKCMttWZkHCQtVmQ@mail.gmail.com [2]
Signed-off-by: Rong Zhang <i@rong.moe>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260809-b4-acpi-battery-notification-v5-1-788d54fa2e35@rong.moe
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
- inlines.h: scx_bpf_dispatch() doesn't exist; the comment means
scx_bpf_sub_dispatch()
- internal.h: name %SCX_DEQ_SCHED_CHANGE instead of the never-defined
%SCX_DEQ_SAVE
- internal.h: @name shows up in the ops file in the scheduler's sysfs
directory, not a "kernel.sched_ext_ops" sysctl
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The events file is under the scheduler's sysfs kobject
(/sys/kernel/sched_ext/root/events for the root scheduler), not the
nonexistent "<scheduler-name>/events" path. Also add the missing "aborting"
line to the scx_show_state.py example.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the
owner went away")' fixes the scenario it was intended for by walking the
message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it
skipped over the bounds checking code that is included in decode_message().
This could lead to issues such as reading past the slab allocation's end,
infinite loops or kernel panics. For those issues to happen, a malformed
wire message is needed to be sent from the device.
Instead of duplicating the bounds checking code already present in
decode_message(), use the function inside resp_worker().
Reported-by: Ruikai Peng <ruikai@pwno.io>
Fixes: 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the owner went away")
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260731152344.1905882-1-youssef.abdulrahman@oss.qualcomm.com
|
|
One,
Removed the superfluous backticks in the sentence.
And second,
s/peferred/preferred/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260814095716.2905589-1-unixbhaskar@gmail.com>
|
|
test_cgcore_lesser_ns_open runs as root throughout and never changes its
euid, so chowning the two cgroup.procs files to a non-root uid has no
effect on the test.
The ENOENT the test expects comes from the cgroup namespace delegation
check in cgroup_procs_write_permission(): the source and destination
cgroups must both be descendants of the namespace root captured at open
time. That check does not depend on file ownership. In addition, the
permission check only examines the common ancestor's cgroup.procs file
(the test root here), which the chown calls do not touch.
Remove the redundant chown calls and the now unused test_euid and
cg_test_a_procs variables.
Signed-off-by: Shaojie Sun <sunshaojie@kylinos.cn>
Reviewed-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The ROG Ryujin III White Edition uses the same report layout as the
other supported Ryujin III variants. Add its USB device ID and list it
in the driver documentation.
The device was tested with the driver on the author's hardware.
Link: https://github.com/aleksamagicka/asus_rog_ryujin-hwmon/pull/10
Signed-off-by: Will Smith <github@notthatwillsmith.com>
Assisted-by: Codex:gpt-5.6-sol sparse
Signed-off-by: Arie Miller <renari@arimil.com>
Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20260812103532.395049-4-renari@arimil.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The ROG Ryujin III uses different report offsets and a different
cooler-duty channel from the Ryujin II. It also lacks the separate
external fan controller supplied with the older model.
Add model data and USB IDs for the Extreme and EVA Edition variants.
Skip controller commands and hide the unavailable controller hwmon
channels for these devices. Update the driver documentation, Kconfig
text, and module description accordingly.
Link: https://github.com/aleksamagicka/asus_rog_ryujin-hwmon/pull/9
Assisted-by: Codex:gpt-5.6-sol sparse
Signed-off-by: Arie Miller <renari@arimil.com>
Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20260812103532.395049-3-renari@arimil.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Move model-specific report offsets and capabilities into a device
information structure. This prepares the driver for coolers which use
a different report layout or do not include the external fan
controller, while preserving the existing Ryujin II 360 behavior.
Handles an issue reported by Sashiko where an id could
be missing driver_data.
Link: https://lore.kernel.org/r/5a817284-a9f4-48b2-9f0f-802c5dc6963c@roeck-us.net
Assisted-by: Codex:gpt-5.6-sol sparse
Signed-off-by: Arie Miller <renari@arimil.com>
Reviewed-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20260812103532.395049-2-renari@arimil.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
scx_process_sync_ecaps() sets up the dispatch context for
ops.sub_ecaps_updated() in the target cpu's pcpu context recovered from the
llist node. However, the context is per executing cpu: the dispatch kfuncs
resolve it with this_cpu_ptr() and the dispatch buffer lives in it. What the
dispatches target is determined by the rq recorded in the context, not by
which cpu's context it is. Under core scheduling the pick runs balance_one()
for sibling rqs, so a sync processed for a sibling invokes the op with the
executing cpu's context not set up and its dispatch kfuncs misoperate on a
NULL or stale rq.
Set up the executing cpu's dsp_ctx instead, matching scx_dispatch_sched().
The recorded rq keeps the dispatches targeting the synced cpu.
Fixes: b81a6c018cde ("sched_ext: Add sub_ecaps_updated() effective-cap change notifier")
Reported-by: David Carlier <devnexen@gmail.com>
Link: https://lore.kernel.org/all/20260813045931.8691-1-devnexen@gmail.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai"
"A handful of small device-specific quirks, regression fixes, and build
fixes. Nothing really stands out.
- Fix for a potential UAF in in USB-audio MIDI2 endpoint handling
- Fix for a mixer regression on SteelSeries Arctis Nova 5 in
USB-audio
- ASoC Intel HDMI-In capture, ACPI match table additions and quirks
- ASoC AMD quirk for HyperX OMEN
- Fix for ASoC Xilinx about crash in pcm formatter IRQ handlers
- Fixes for ASoC Realtek rt1320 and rt5645 codecs
- Fixes for ASoC TI tas2781 and tac5xx2-sdw build errors"
* tag 'sound-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: Intel: NVL: Add entry for HDMI-In capture support to non-I2S codec boards.
ASoC: xilinx: formatter_pcm: pass aud_drv_data to irq handlers
ASoC: tac5xx2-sdw: select REGMAP_SOUNDWIRE_MBQ
ASoC: rt1320: run the initialisation preset on the first hardware init
ASoC: rt5645: Perform the initial jack detect at probe
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for NVL.
ASoC: Intel: soc-acpi: Add entry for HDMI_In capture support in NVL match table
ASoC: amd: yc: Add DMI quirk for HyperX OMEN Gaming Laptop 16-ap1xxx
ASoC: tas2781: fix clang build error for goto bypassing cleanup variable
ALSA: usb-audio: Fix mixer regression on SteelSeries Arctis Nova 5
ALSA: usb: Fix UAF at delayed release of MIDI2 EPs
|
|
ring_buffer_per_cpu::mapped tracks if a ring-buffer is either mapped by
user-space or if it is a persistent buffer. We already have user_mapped
for the former and ring_meta for the latter. Get rid of mapped and
instead create rb_is_static(). A static ring-buffer cannot be resized,
swapped or have its pages extracted.
Link: https://patch.msgid.link/20260813131152.3589632-10-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The 'cpus' field in struct trace_buffer became useless in commit
8e7b58c27b3c ("ring-buffer: Just update the subbuffers when changing their
allocation order"). Remove it
Link: https://patch.msgid.link/20260813131152.3589632-9-vdonnefort@google.com
Fixes: 8e7b58c27b3c ("ring-buffer: Just update the subbuffers when changing their allocation order")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The ring buffer order can be dynamically modified and temporarily
disables writing to do so. It is therefore safe to use the updated value
to calculate the maximum event size which can be written onto the ring
buffer.
However, notice it is hardly making any difference for trace_marker
because of the TRACE_MARKER_MAX_SIZE limit. For an 8KiB subbuf size,
trace_marker can take 4096 characters while it can 'only' take 4054
bytes for smaller subbufs.
Link: https://patch.msgid.link/20260813131152.3589632-8-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
ring_buffer_alloc_read_page() is racy with ring_buffer_subbuf_order_set,
it can allocate a reader page with an outdated order. This isn't a big
issue, the user can still re-allocate a new reader page and try again.
However, what is more problematic is if the value of subbuf_order
changes in the middle of ring_buffer_alloc_read_page(). In that case,
bpage->order might not match the actual allocated memory.
Use bpage->order for the allocation to prevent this race.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260813131152.3589632-6-vdonnefort@google.com
Fixes: bce761d75745 ("ring-buffer: Read and write to ring buffers with custom sub buffer size")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
trace_buffer subbuf_size is read lockless in ring_buffer_read_page() and
ring_buffer_read_start(), while it can simultaneously be resized with
ring_buffer_subbuf_order_set().
Instead of trace_buffer::subbuf_size, use bpage::order in
ring_buffer_read_start() and ring_buffer_read_page().
In ring_buffer_read_start(), even with resize_disabled, there is still a
possibility of a race with a buffer modification. Hold the trace_buffer
mutex to synchronise with any pending ring buffer order modification.
trace_buffer::subbuf_size is now actually useless, remove it. Also,
create accessors rb_subbuf_capacity() and rb_page_capacity() which
return the actual size available for storing events, while
rb_subbuf_size() returns the actual subbuf page-size.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260813131152.3589632-5-vdonnefort@google.com
Fixes: f9b94daa542a ("ring-buffer: Set new size of the ring buffer sub page")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260805153225.2096152-1-vdonnefort%40google.com # patch 1
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Pull ceph fixes from Ilya Dryomov:
"A handful of tiny fixes, with the main ones being a follow-up for
CEPH_IOC_SET_LAYOUT{,_POLICY} ioctl permissions check that went into
rc5 and a userspace compatibility fixup. The rest mostly harden
against malformed network input. All marked for stable"
* tag 'ceph-for-7.2-rc8' of https://github.com/ceph/ceph-client:
ceph: use the mount idmap for the owner checks in the SET_LAYOUT ioctls
ceph: fix MDS random selection readiness predicate
libceph: Avoid using invalid osd indices from primary_temp
libceph: fix OOB read in decode_watchers() via missing bounds check
libceph: fix multiple unsafe decodes in decode_locker()
libceph: tolerate addrvecs with multiple entries of the same type
|
|
Discarding a cached reader page after a concurrent ring buffer resize
uses the new global subbuf_order for the free_pages() call. This
mismatched order may crashes the kernel or leaks memory because the cached
page was allocated under the old size.
Save the actual free_page order alongside the page address to ensure we
always refer to the correct value and do not rely on the potentially
stalled cpu_buffer->subbuf_order value. The simplest is to make
free_page a buffer_data_read_page which already covers exactly what we
need: a page address and a page order.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260813131152.3589632-4-vdonnefort@google.com
Fixes: 8e7b58c27b3c ("ring-buffer: Just update the subbuffers when changing their allocation order")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Because, ring_buffer_subbuf_order_set() can clear cpu_buffer->free_page,
hold cpu_buffer->lock to prevent races with
ring_buffer_alloc_read_page() and ring_buffer_free_read_page().
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260813131152.3589632-3-vdonnefort@google.com
Fixes: 8e7b58c27b3c ("ring-buffer: Just update the subbuffers when changing their allocation order")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260810125633.3344684-1-vdonnefort%40google.com # patch 3
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When sub-buffers use an order greater than 0, cpu_buffer->free_page is
allocated with subbuf_order. Use the correct order for
cpu_buffer->free_page.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260813131152.3589632-2-vdonnefort@google.com
Fixes: f9b94daa542a ("ring-buffer: Set new size of the ring buffer sub page")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260806211306.3704194-1-vdonnefort%40google.com # patch 3
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
On RV64, the ABI requires sign-extension for signed 1-byte and 2-byte kfunc
args. However, the RV64 JIT currently does not perform sign-extension for
such kfunc args.
Before commit 7ce090afbf72 ("bpf: Infer zext_dst based on static register
liveness analysis"), state pruning could potentially omit zero-extension
of 32-bit subregisters, which inadvertently masked the above issue by making
the args appear as if they had been properly sign-extended. After that
commit, the problem is exposed, causing the kfunc_call/kfunc_call_test4
selftest to fail.
Fix this by extending the existing sign-extension logic to handle signed
1-byte and 2-byte kfunc args as well.
Fixes: 443574b03387 ("riscv, bpf: Fix kfunc parameters incompatibility between bpf and riscv abi")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260814064726.3607615-1-pulehui@huaweicloud.com
|
|
arm64 passes zero as the stack pointer while walking BPF frames, so
bpf_throw() leaves stale KASAN stack poison after jumping to the
exception callback.
Use the frame pointer as the fallback stack watermark.
Fixes: e74cb1b42213 ("arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT")
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/bpf/20260812-hello_world-v1-1-c3c2ddcb362d@meta.com
|
|
pyperf600 has been running into 8K BPF_COMPLEXITY_LIMIT_JMP_SEQ limitations
for a long while now, after some internal compiler changes.
Until BPF verifier is bestowed with scalar evolution logic, make that test
actually work by doing what would anyone should do in such situations: by
moving repeatable per-iteration work into independently verified global
functions.
`void *` argument is a problem for global funcs, but a static function wrapper
doing necessary casts and a bit of __arg_nonnull magic dust is all it takes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Pu Lehui <pulehui@huawei.com> # riscv
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/bpf/20260813232943.581283-1-andrii@kernel.org
|
|
lwt_ip_encap hardcodes the ping6 binary for its IPv6 pings. iputils
merged ping6 into ping long ago and distros have started dropping the
compat symlink -- Arch's iputils 20250605 ships only arping, clockdiff,
ping and tracepath. There, every lwt_ip_encap subtest fails:
check_ping_ok:FAIL:ip netns exec ns-lwt-ip-encap-1-0101330 ping6 -c 1 \
-W1 -I veth1 fb04::1 > /dev/null unexpected error: 256 (errno 2)
#217/1 lwt_ip_encap_ipv4/egress:FAIL
The IPv4 subtests fail too, because check_ping_ok() pings both families.
SYS() runs the command through system(), so a missing binary is
indistinguishable from an unreachable peer.
network_helpers.c has had ping_command() for exactly this since commit
372642ea83ff ("selftests/bpf: Move netcnt test under test_progs"): it
falls back to "ping -6" when ping6 is not present. lwt_ip_encap.c is the
last hardcoded ping6 user. Fix that.
Fixes: f5e288943e2c ("selftests/bpf: Move test_lwt_ip_encap to test_progs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20260813213558.3103179-1-andrii@kernel.org
|
|
Honghui Jiang <jiang_hh2019@163.com> says:
A partial DMA mapping failure can leave per-transfer mapping flags set
while cur_{tx,rx}_dma_dev are NULL or still refer to the devices used
for an earlier message. The subsequent cleanup may then unmap a
transfer with a NULL or stale device.
Before commit e289df82344f ("spi: Rework per message DMA mapped flag to
be per transfer"), partial-failure handling was already incomplete, but
__spi_unmap_msg() was gated by cur_msg_mapped, which was set only after
the whole message mapped successfully. Earlier mappings could leak, but
cleanup could not unmap them with an unpublished device. The
per-transfer conversion removed that gate: mapping flags can now remain
set while cur_{tx,rx}_dma_dev are still unpublished, turning the leak
into a NULL- or stale-device unmap regression.
Patch 1 publishes the mapping devices before the loop and unwinds every
failure through __spi_unmap_msg(). It keeps the forward declaration so
it is independently buildable and straightforward to backport. Patch 2
then removes the declaration by moving __spi_unmap_msg() above
__spi_map_msg(). Patch 3 clears the current DMA device pointers once the
message has been unmapped, while leaving them intact during partial-map
unwind and DMA-to-PIO fallback. Patch 4 adds the DMA mapping KUnit suite
as a separate translation unit.
Only patch 1 is a stable candidate; patches 2 through 4 are follow-up
cleanup and test changes for mainline.
Testing:
- Patch 1 builds independently with the x86_64 reproducer configuration.
- The spi_dma KUnit suite passes all four cases on x86_64 and UML.
Moving the DMA device assignments back after the mapping loop makes
both failure-path cases fail.
- The default and all-tests KUnit configurations both select the suite.
- All four reproducer cases complete without an oops when run as the
first message, and map/unmap counts are balanced after a successful
first message.
- After message cleanup, cur_{tx,rx}_dma_dev are NULL.
v1: https://lore.kernel.org/r/20260805151456.756579-1-jiang_hh2019@163.com
Link: https://patch.msgid.link/20260814031419.43378-1-jiang_hh2019@163.com
|
|
Add KUnit tests for the __spi_map_msg() error paths. The tests verify
that a later TX or RX mapping failure clears the mapping state of
earlier transfers and leaves cur_{tx,rx}_dma_dev identifying the
current mapping device.
A zero-length transfer causes sg_alloc_table() to return -EINVAL,
providing deterministic failure injection without test hooks.
Additional cases cover successful map/unmap and a message which
requires no mapping.
Build the DMA suite as a separate translation unit, exposing the two
internal mapping helpers only for KUnit through the local internal
header. Enable SPI in the default and all-tests KUnit configurations so
the suite is exercised there.
Signed-off-by: Honghui Jiang <jiang_hh2019@163.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260814031419.43378-5-jiang_hh2019@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current DMA device pointers remain set after a message has been
unmapped. Existing users either check the corresponding mapped flag or
access the pointers before finalizing the message, but retaining stale
device pointers is fragile.
Clear both pointers in spi_unmap_msg() after the internal unmap
completes. Keep them intact in __spi_unmap_msg(), since that helper is
also used during partial-map unwind and the in-message DMA-to-PIO
fallback, before processing of the current message is complete.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Honghui Jiang <jiang_hh2019@163.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260814031419.43378-4-jiang_hh2019@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move __spi_unmap_msg() above __spi_map_msg() so the mapping error path
can call it without a forward declaration. This is a code-only
relocation with no functional change.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Honghui Jiang <jiang_hh2019@163.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260814031419.43378-3-jiang_hh2019@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If RX mapping fails after TX mapping succeeds, __spi_map_msg() unmaps
TX but leaves tx_sg_mapped set. If TX mapping fails on a later
transfer, mappings created for earlier transfers remain active.
In both cases, cur_{tx,rx}_dma_dev have not yet been updated because they
are assigned only after every transfer has been mapped. The subsequent
spi_unmap_msg() may therefore unmap the TX mapping again or release
earlier mappings using a NULL or stale device. Using a NULL device can
trigger an oops. An empty SG table does not prevent the NULL dereference
because dma_unmap_sg_attrs() accesses the device before checking the
entry count.
Publish both mapping devices before mapping starts and unwind all
failures through __spi_unmap_msg(). This clears the mapping flags and
releases each mapping once with the device that created it.
Publishing the devices before the loop also refreshes them when no
transfer needs mapping. No mapping flag is set in that case, so current
users do not use the pointers as mapping owners.
Fixes: e289df82344f ("spi: Rework per message DMA mapped flag to be per transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Honghui Jiang <jiang_hh2019@163.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260814031419.43378-2-jiang_hh2019@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The regmap has no writeable_reg callback, so regmap considers every
register up to max_register writable. That includes the read-only SDCA
Controls the driver itself describes: the Latency of every Entity, the
Clock Valid of every Clock Source, the actual power state of the Power
Domain Entity, the protection status, the algorithm ready flag and the
Extension Unit id and version. Most of them are also listed in
tas2783_reg_default[] with a placeholder of zero, even though a default
for, say, a latency reading is meaningless.
Reading such a Control caches its real value, which no longer matches
the placeholder, so regcache_sync() then tries to write it back. The
peripheral rejects the transaction with -ENODATA and the sync aborts,
leaving the rest of the cache unrestored.
Add a writeable_reg callback that refuses the read-only Controls and
otherwise keeps the previous behaviour. Every selector it lists is the
read-only Control of its Entity type in sdca_function.h, and none of the
Controls the driver writes is affected: the requested power state, the
mutes, the Cluster Index, the protection mode, the algorithm enable and
the file download Controls all stay writable.
The list is static because the BIOS on the affected machines describes
no Smart Amp SDCA function, so the driver runs its fallback tables and
sdca_regmap_writeable() is not available to it. It would be good to
have the list confirmed against the hardware documentation, and to know
whether the read-only Controls belong in tas2783_reg_default[] at all.
Signed-off-by: Andrey Golovko <andrey.golovko@gmail.com>
Link: https://patch.msgid.link/20260814094000.22118-2-andrey.golovko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Don't warn when a mount is completed from another user namespace.
fsopen() records the caller's user namespace in fc->user_ns and
hands back an ordinary file descriptor. The task that calls
fsconfig(FSCONFIG_CMD_CREATE) doesn't have to be the one that
created the context, and mount_capable() lets it through as long
as the caller has CAP_SYS_ADMIN over fc->user_ns, which anyone in
an ancestor namespace does. So fc->user_ns != current_user_ns()
is something an unprivileged user can arrange.
Both overlayfs and binfmt_misc WARN_ON() that. Overlayfs already
has the same check as a plain error return in ovl_parse_param().
Drop the WARN_ON() and just refuse. Add selftests for both cases.
- Reject pid allocations through dead ancestor pid namespaces.
Require PIDNS_ADDING in every namespace that will receive the pid
before publishing any of them. That preserves the invariant that
free_pid() never decrements pid_allocated in a namespace whose
child_reaper is no longer live. The existing ENOMEM behavior is
unchanged.
* tag 'vfs-7.2-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pid: reject allocations through dead ancestor pid namespaces
selftests/filesystems: test completing a context from another user namespace
binfmt_misc: don't warn when the mount is completed from another user namespace
ovl: don't warn when the mount is completed from another user namespace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a fault caused when the RISC-V Zbb-enabled strlen() is executed
on a string that ends right before a page boundary, when the next
page is unmapped
- Fix a race with the misaligned vector performance testing code that
can prevent the outcome of the test from being stored into the vDSO
cache
- Fix a kernel warning generated by the ftrace code when
ftrace_modify_call_code() runs against a ftrace-traced function where
a kprobe has already been attached. This shows up in the bpf
kselftests
* tag 'riscv-for-linus-v7.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: lib: Fix ZBB strnlen reading past count boundary
riscv: hwprobe: Register unaligned probes before usermode
riscv: ftrace: Fix ftrace_modify_call failure on kprobed functions
|
|
CONFIG_NR_CPUS doesn't define on some UP platforms (e.g. arm), so this
can cause make oldconfig to loop indefinitely when CONFIG_SMP=n:
$ make ARCH=arm allmodconfig
$ sed -i "/CONFIG_SMP=y/d" .config
$ sed -i "/CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS.*/d" .config
EROFS LZMA default maximum decompression streams (EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS) [0] (NEW)
EROFS LZMA default maximum decompression streams (EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS) [0] (NEW)
...
Let's guard NR_CPUS with SMP instead of using a hardcoded arbitrary CPU
uplimit here, similar to commit a3344078101c ("mm: make SPLIT_PTE_PTLOCKS
depend on SMP").
The initial report from SJ Park was for m68k [1] (m68k is the only arch
without NR_CPUS in Kconfig), and that got fixed in commit 1fd495ef09ee
("m68k: Define NR_CPUS to 1")
Reported-by: SJ Park <sj@kernel.org>
Link: https://lore.kernel.org/all/anuyFHLUGDjZWY4K@XiangdeMacBook-Pro.local/T/#u [1]
Closes: https://lore.kernel.org/r/20260728065447.91511-1-sj@kernel.org
Reported-by: Guenter Roeck <groeck7@gmail.com>
Closes: https://lore.kernel.org/r/87853c96-cc8f-49e6-81b1-02bfe409e372@roeck-us.net
Fixes: c9b47e6b2311 ("erofs: cap LZMA stream pool size")
Signed-off-by: Gao Xiang <xiang@kernel.org>
Tested-by: SJ Park <sj@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
exfat_find_free_bitmap() searches the entire allocation bitmap and may
wrap around to its beginning. exfat_trim_fs() does not verify that the
returned cluster is still within the requested FITRIM range.
As a result, a partial FITRIM operation may discard free clusters outside
the user-specified range and report a trimmed length larger than the
requested length.
Validate each returned cluster against the requested range and stop the
search when it wraps around or passes the range end.
Signed-off-by: Yang Wen <anmuxixixi@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The logical minimum and maximum values come from the HID report
descriptor and cover the full signed 32-bit range. Subtracting them in
an int can overflow before the force feedback value is scaled. The
subsequent multiplication can overflow as well, producing an incorrect
value despite the final range checks.
Use 64-bit intermediates for both scaling helpers, as done by commit
48d1677779ad ("HID: pidff: Fix integer overflow in pidff_rescale") for
the same arithmetic in the PID driver. This keeps the arithmetic
defined for the complete descriptor range before the result is clamped.
Fixes: dc76c912145f ("Input: use new FF interface in the HID force feedback drivers")
Fixes: b27c9590ca0f ("HID: add support for Thrustmaster FGT Force Feedback wheel")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Commit b5e65ae557da ("HID: multitouch: Add quirk for Hantick 5288
touchpad") assigned MT_CLS_NSMU to the HTIX5288 (0911:5288). This was
necessary because the device sometimes fails to send touch release
signals when transitioning from >=2 fingers to <2 fingers, and
MT_QUIRK_NOT_SEEN_MEANS_UP fixes stuck touches by treating missing
contacts as released.
However, MT_CLS_NSMU only carries MT_QUIRK_NOT_SEEN_MEANS_UP. It
lacks MT_QUIRK_CONTACT_CNT_ACCURATE and MT_QUIRK_IGNORE_DUPLICATES.
As a result, after a two-finger scroll finger lift, the device still
reports stale coordinates from the released contact in subsequent
frames, and the driver overwrites the remaining active slot with
those frozen coordinates. The remaining finger appears stuck at the
lift position until all fingers are lifted.
This was confirmed via evtest on Arch Linux 7.1.3: after
TRACKING_ID=-1 for the released slot, every subsequent frame contained
duplicate position pairs -- the real moving finger's coordinates
followed by the lifted finger's frozen position, both attributed to
the active slot.
Reclassify the device to MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU
(0x0018), which preserves the original MT_QUIRK_NOT_SEEN_MEANS_UP
fix while adding the necessary Win8 quirks (CONTACT_CNT_ACCURATE,
IGNORE_DUPLICATES), preventing stale coordinate contamination.
The additional FORCE_MULTI_INPUT flag is harmless here: it separates
the mouse and touchpad collections into distinct input devices,
which is the standard behavior libinput already expects.
Fixes: b5e65ae557da ("HID: multitouch: Add quirk for Hantick 5288 touchpad")
Signed-off-by: Xianglin Lin <1021538027@qq.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
SOF treats the topology mixer min and max values as non-negative indices
into its volume table. It stores them in signed fields, allocates max + 1
entries through an int argument, and later indexes the table with the
stored range.
An inverted range is invalid, while a maximum at or above INT_MAX cannot
be represented safely after the increment or in the signed fields.
Validate the complete range before storing it or allocating the table.
Fixes: 311ce4fe7637 ("ASoC: SOF: Add support for loading topologies")
Assisted-by: Codex:gpt-5
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260814081238.25434-1-pengpeng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When a fair task is enqueued, we must update curr and more precisely
its vruntime before placing the enqueued task so avg vruntime will take
into account the last exec phase.
Example:
TA is an always running task in cgroup G0.
TB is a short running task (cyclictest) in cgroup G1.
The lag of TB always increases up the clamp limit because TB is placed
before TA(curr) is updated (since the last tick). When curr(TA) is
finally updated, its last exec phase provide positive lag to TB
Because TA and TB don't belong to the same group, enqueue_hierarchy() will not
update TA's entity when updating curr but only G0's entity at root level.
The same applies when dequeuing.
This is because update_curr() uses ->h_curr, rather than ->curr, and therefore,
while it is invoked on the root cfs_rq, which contains all the eevdf bits, it
does not do the right thing.
Fixes: 85570f10a4c6 ("sched/eevdf: Move to a single runqueue")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260812125039.1717249-1-vincent.guittot@linaro.org
|
|
Pull in dependents, the flat hierarchy fix depends on this.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
In order to compute the right lag, it is required to update time to 'now'.
Without this, the delayed entity might appear younger than it really is and
receive less compensation for having waited.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Sashiko has complained about out of bounds issues if ctx->pos isn't what
is expected in __eventfs_iterate()[1]. This would be an issue if the logic
that calls __eventfs_iterate() didn't already prevent the code from going
out of bounds.
The issue Sashiko brings up is if a user uses lseek64() to put in a
position like 0x100000000 which will overflow the integer used to iterate
the files. This should never be an issue because both tracefs and eventfs
uses the default "maxbytes" for its superblock "s_maxbytes" field which is
defined as:
fs/super.c: s->s_maxbytes = MAX_NON_LFS;
include/linux/fs.h:#define MAX_NON_LFS ((1UL<<31) - 1)
Where MAX_NON_LFS turns into 0x7fffffff.
Testing this with code to try to pass 0x100000000 to lseek64() to a
eventfs directory returns -EINVAL.
But relying on logic for the integrity of a function is not very robust.
Add a WARN_ON_ONCE() in case the ctx->pos is out of the expected range.
[1] https://sashiko.dev/#/patchset/20260810160708.3460a2fd%40gandalf.local.home
Link: https://patch.msgid.link/20260810175928.5f4d9d5c@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The function trace_event_update_all() does a scan of events looking to
replace enums with their values in the strings that get exported to the
event format files. It's run at boot up on all events and again when a
module loads.
The issue is that when a module loads, it still runs on *all* events.
There's no reason to process every event when a module loads as the
previous events have already been processed. Only execute on the events
that are loaded with the module.
Link: https://patch.msgid.link/20260813204226.29563591@gandalf.local.home
Fixes: 3673b8e4ce723 ("tracing: Allow for modules to convert their enums to values")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
hid_sensor_custom_add_attributes() creates one sysfs group for each
custom sensor field. If sysfs_create_group() fails after some groups
have already been created, the function returns the error without
removing the previously created groups.
Add a local unwind path to remove the groups that were already created.
With enable_sensor exposed only after the field attributes are ready,
this path can free sensor_inst->fields without leaving enable_sensor
able to access pointers into that array.
Fixes: 4a7de0519df5 ("HID: sensor: Custom and Generic sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
enable_sensor_store() can call set_power_report_state(), which
dereferences sensor_inst->power_state and sensor_inst->report_state.
These pointers refer to entries in sensor_inst->fields.
Create the field attributes before exposing the enable_sensor sysfs
attribute, so enable_sensor cannot be accessed before the state it
depends on has been initialized.
On remove, delete enable_sensor before freeing the field attributes,
so a concurrent sysfs write cannot dereference freed memory through
power_state or report_state.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260623021950.1736413-1-haoxiang_li2024@163.com?part=1
Fixes: 4a7de0519df5 ("HID: sensor: Custom and Generic sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
buffer
quickspi_hid_raw_request() receives the caller's buffer length in len, but
quickspi_get_report() never sees it and copies the whole device-supplied
response into buf regardless:
memcpy(buf, qsdev->report_buf, qsdev->report_len);
qsdev->report_len comes from the input report the touch controller returns,
while buf is sized to whatever the caller asked hidraw for through
HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf
with device-controlled content.
The intel-quicki2c sibling already passes the caller length down to
quicki2c_get_report() and validates the response against it before the
copy. Do the same here.
Fixes: 4138f21115ae ("HID: intel-thc-hid: intel-quickspi: Complete THC QuickSPI driver")
Suggested-by: Sashiko AI <sashiko-bot@kernel.org>
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Commit 860e748bddcc ("drm: ensure blend mode supported if pixel format
with alpha exposed") introduced a WARN() to let driver developers know
that a previously valid behavior should now be changed.
But WARN() should not be used for that, as it's a kernel warning report
mechanism for conditions that are not expected to happen. It also
produces a stack trace. Instead, a simple warning-level log message
should have been used, as drivers were expected to trigger the
condition.
This is causing problems for fuzzers, as they may stop when encountering
a "BUG:" or "WARNING:" in the logs.
Replace WARN() with drm_warn() in this function, avoiding these issues.
Fixes: 860e748bddcc ("drm: ensure blend mode supported if pixel format with alpha exposed")
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260731154232.37020-2-leandro.ribeiro@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
|
|
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and
virtio_gpu_object_shmem_init() describes the framebuffer's backing pages
to the host with sg_phys(). Those are guest-physical addresses. In a PV
domain they resolve, on the host side, to pages belonging to some other
domain, so the host scans out unrelated memory.
Move the decision into virtio_gpu_use_dma_api() and give it the
xen_domain() check, like vring_use_map_api() has. This
additionally enables the dma_sync_sgtable_for_device() calls in
virtgpu_vq.c, which are required for correctness whenever swiotlb
is in play.
Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with
virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0
works fine and doesn't need this fix because it is identity-mapped,
only PV dom0s are affected.
Fixes: a3b815f09bb8 ("drm/virtio: add iommu support.")
Signed-off-by: Ben Leggett <benjamin@edera.io>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260806-virtgpu-xen-dma-v1-1-e499b345bbad@edera.io
|
