| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the PCI1008 device ID to the quirk_switchtec_ntb_dma_alias PCI fixup
table. Without it, DMA transactions from a PCI1008 switch's NTB function
are not given the correct requester ID alias, which can misdirect them
under an IOMMU.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260714212010.230606-4-logang@deltatee.com
|
|
Add the Microchip PCI1008 device ID to the core switchtec management
driver's PCI ID table. Without it, the management endpoint on a PCI1008
switch is not bound by this driver, preventing userspace tools from
configuring or monitoring the switch and leaving NTB functionality
unavailable.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260714212010.230606-3-logang@deltatee.com
|
|
Add the PCI1008 device ID for switchtec-dma.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20260714212010.230606-2-logang@deltatee.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Among the most important fixes that we have here, there are:
- the revert of the uclinux map driver which was presumed to
be no longer used but in fact was
- the use of SPI match data to get chip capabilities in the
mchp23k256 driver
- several fixes addressing the newly introduced virt-concat
support
- a missing build dependency on ndfc
as well as the usual load (if not actually bigger than usual) of
uninitialized variables, leaks, double free, and AI fuzzed issues
being fixed"
* tag 'mtd/fixes-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: maps: remove uclinux map driver"
mtd: onenand: samsung: report DMA completion timeouts
mtd: rawnand: fsl_ifc: return errors for failed page reads
mtd: mchp23k256: use SPI match data for chip caps
mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout
mtd: rawnand: lpc32xx_mlc: fail DMA transfers on timeout
mtd: fix double free and WARN_ON in add_mtd_device() error paths
mtd: virt-concat: free duplicate generated name
mtd: nand: mtk-ecc: stop on ECC idle timeouts
mtd: mtdswap: remove debugfs stats file on teardown
mtd: mtdpart: validate partition bounds in mtd_add_partition()
mtd: mtdpart: fix uninitialized erasesize on MTDPART_OFS_RETAIN error path
mtd: rawnand: ndfc: add CONFIG_OF dependency
mtd: spinand: initialize ret in regular page reads
mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy()
mtd: rawnand: ingenic: handle ECC clock enable failures
mtd: nand: ecc-mtk: handle ECC clock enable failures
mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy_joins()
mtd: rawnand: ndfc: fix gcc uninitialized var
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix RPMB device unregister ordering
- Fix __counted_by handling in mmc_test
MMC host:
- mtk-sd: Document missing clocks for MT8189
- sdhci-esdhc-imx: Fix the support for system suspend/resume for SDIO
- sdhci-of-dwcmshc: Fix error handling for clock prepare/enable
- vub300:
- Fix lockdep issue for the cmd_mutex
- Fix use-after-free on probe failure
MEMSTICK:
- Reject a card that reports too many blocks"
* tag 'mmc-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: fix resume error handling
mmc: sdhci-esdhc-imx: make non-fatal errors non-blocking in suspend
mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend
mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt
mmc: sdhci-esdhc-imx: restore pinctrl before restoring ios timing on resume
mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore
mmc: sdhci-esdhc-imx: restore DLL override for DDR modes on resume
mmc: sdhci-esdhc-imx: remove unnecessary mmc_card_wake_sdio_irq check for tuning save/restore
mmc: block: fix RPMB device unregister ordering
memstick: ms_block: reject a card that reports too many blocks
dt-bindings: mmc: mtk-sd: Document extra clocks for MT8189
mmc: vub300: defer reset until cmd_mutex is unlocked
mmc: vub300: fix use-after-free on probe failure
mmc: mmc_test: Fix __counted_by handling after kzalloc_flex() conversion
mmc: sdhci-of-dwcmshc: check bus clock enable result in the probe() method
|
|
This reverts commit e057b94772328221405b067c3a85fe479b915dc8.
Sashiko points out that updating 'orig_x0' after secure_computing()
has returned is too late to handle the case where a seccomp filter is
re-evaluated after initially returning SECCOMP_RET_TRACE. This means
that a tracer can manipulate the first argument of the syscall behind
seccomp's back.
For now, revert the initial fix and we'll have another crack at it soon.
Since the incorrect fix was cc'd to stable, do the same here with an
appropriate fixes tag.
Cc: stable@vger.kernel.org
Fixes: e057b9477232 ("arm64: syscall: Ensure saved x0 is kept in-sync with tracer updates")
Link: https://sashiko.dev/#/patchset/20260716120640.6590-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ttm_pool_split_for_swap() unconditionally splits high-order pool pages
into order-0 pages before backup, so every compound the shrinker
touches is shattered even when the rest of the system would prefer it
stay intact. Under sustained kswapd pressure this fragments memory
enough to drive other parts of MM into recovery loops.
Back up each compound at its native order instead. In
ttm_pool_backup(), hand the full compound to the new
ttm_backup_backup_folio(), which backs up subpages to a contiguous
range of shmem indices and returns the base handle plus the number of
subpages actually backed up (@nr_backed). On full success, free the
compound once at its native order -- no split_page(), no per-4K
refcount juggling.
A per-folio backup can't be made fully atomic under memory pressure:
ttm_backup_backup_folio() must allocate shmem folios before source
subpages can be released, so under true OOM any subpage may fail
while the rest of the compound is still live. Two mechanisms handle
this without regressing reclaim behaviour:
- alloc_gfp gets __GFP_NOMEMALLOC whenever order > 0 (cleared again
for order-0), so a high-order backup fails fast with -ENOMEM
instead of draining kernel reserves, leaving them for other
allocations under the same pressure.
- If ttm_backup_backup_folio() still returns a short @nr_backed with
a valid handle for the successfully-backed prefix, split the
source compound with ttm_pool_split_for_swap(), free the prefix as
order-0 pages (already safely in shmem), and retry the remaining
subpages at order 0, where __GFP_NOMEMALLOC is cleared and
reserves may be used as a last resort.
This preserves the original split-on-OOM fallback while keeping the
common case fragmentation-free, and preserves the "partial backup is
allowed" contract (shrunken is incremented per subpage backed up).
The restore-side leftover-page split in ttm_pool_restore_commit() is
left as-is: it's unreachable in practice and not worth complicating
the restore state machine to avoid.
Testing: the existing backup_fault_inject point only truncated
tt->num_pages, which never exercised the reactive split path above
since it never left a compound partially backed up. Wire fault
injection into ttm_backup_backup_folio() itself: past the first
subpage of a compound, synthesize a -ENOMEM in place of
shmem_read_folio_gfp() when should_fail() trips, producing the same
short @nr_pages_backed a real failure would and forcing
ttm_pool_backup() through the split-and-retry path. The fault_attr
stays private to ttm_pool.c; ttm_backup.c reaches it through
ttm_backup_fault_inject_folio(), declared in ttm_pool_internal.h.
While converting the writeback branch to operate on the whole folio,
the unlock condition after shmem_writeout() also changed from `if
(ret)` to `if (ret == AOP_WRITEPAGE_ACTIVATE)`, matching the actual
contract: shmem_writeout()/swap_writeout() only leave the folio locked
when returning AOP_WRITEPAGE_ACTIVATE; any other return (including a
hard error from arch_prepare_to_swap()) means the folio was already
unlocked internally. The old `if (ret)` check would have double-
unlocked in that hard-error case.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: b63d715b8090 ("drm/ttm/pool, drm/ttm/tt: Provide a helper to shrink pages")
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260716201358.4086085-1-matthew.brost@intel.com
|
|
A recent change enabling compile testing of a Freescale dual-role
controller indirectly enabled a USB PHY driver to be built. That driver
in turn is missing a bunch of static keywords which results in warnings
like:
drivers/usb/phy/phy-fsl-usb.c:105:5: error: no previous prototype for 'write_ulpi' [-Werror=missing-prototypes]
105 | int write_ulpi(u8 addr, u8 data)
| ^~~~~~~~~~
which consequently breaks -Werror builds.
Add the missing static keywords.
Fixes: 0807c500a1a6 ("USB: add Freescale USB OTG Transceiver driver")
Cc: stable@vger.kernel.org # 3.0
Reported-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/4f9f5ff9-8eaa-4bd5-9331-37119f78e13f@sirena.org.uk
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260717154957.1853976-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are only three devicetree fixes this time: one critical memory
corruption fix for Renesas and three minor corrections for Tegra.
The MAINTAINERS file is updated for a new maintainer of the CIX
platform and two address changes.
The rest is all driver fixes, mostly firmware:
- multiple runtime issues in ARM SCMI and FF-A firmware code, dealing
with error handling for corner cases in firmware.
- multiple fixes for reset drivers, dealing with individual platform
specific mistakes and more error handling
- minor build and runtime fixes for the Tegra SoC drivers"
* tag 'soc-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: renesas: ironhide: Describe inline ECC carveouts
MAINTAINERS: Update maintainer and git tree for CIX SoC
ARM: Don't let ARMv5 platforms select USE_OF
MAINTAINERS: Update SpacemiT SoC git tree repository
firmware: arm_scmi: Rate-limit queue-full warnings in IRQ context
firmware: arm_scmi: Use 64-bit division for clock rate rounding
reset: imx7: Correct polarity of MIPI CSI resets on i.MX8MQ
reset: sunxi: fix memory region leak on ioremap failure
dt-bindings: reset: altr: add COMBOPHY_RESET for Agilex5
reset: spacemit: k3: fix USB2 ahb reset
firmware: arm_scmi: Grammar s/may needed/may be needed/
firmware: arm_ffa: Fix NULL dereference in ffa_partition_info_get()
firmware: arm_ffa: Respect firmware advertised RX/TX buffer size limits
arm64: tegra: Fix CPU1 node unit-address on Tegra264
arm64: tegra: Fix CPU compatible string to cortex-a78ae on Tegra234
MAINTAINERS: .mailmap: update Jens Wiklander's email address
soc/tegra: fuse: Fix spurious straps warning on SMCCC platforms
soc/tegra: pmc: fix #ifdef block in header
drm/tegra: Fix a strange error handling path
arm64: tegra: Remove fallback compatible for GPCDMA
|
|
mtd_add_partition() does not reject the special offset value
MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in
add_mtd_device() when called through the BLKPG ioctl on NAND
devices. The RETAIN value depends on cur_offset being the end of
the previous partition, but in the dynamic partition path
cur_offset equals the offset argument itself, causing undefined
behavior.
Commit 5daa7b21496a ("mtd: prepare partition add and del functions
for ioctl requests") introduced mtd_add_partition() and correctly
rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2),
since those special offsets rely on cur_offset tracking the
previous partition's end. However, commit 1a31368bf92e ("mtd: add a flags
for partitions which should just leave smth. after them")
later added MTDPART_OFS_RETAIN (-3) for the static
partition table path without updating mtd_add_partition() to
also reject this value.
With offset=-3 passed via BLKPG, the RETAIN size calculation in
allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD
= parent_size + 3). If the underflow result does not appear to
leave enough space, allocate_partition() jumps to out_register via
goto, skipping erasesize initialization. This results in
erasesize=0, which triggers:
WARN_ON((!mtd->erasesize || !master->_erase) &&
!(mtd->flags & MTD_NO_ERASE))
in add_mtd_device(). If the underflow result appears to leave
enough space, a bogus partition size is calculated, but the
"out of reach" sanity check catches the invalid offset and
creates a disabled empty partition (offset=0, size=0) instead
of returning an error.
Fix this by adding MTDPART_OFS_RETAIN to the rejection list in
mtd_add_partition(), consistent with the existing handling of
APPEND and NXTBLK.
Fixes: 1a31368bf92e ("mtd: add a flags for partitions which should just leave smth. after them")
Signed-off-by: zhouminqiang <zhouminqiang2@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Replace the open-coded of_address_to_resource() plus devm_request_mem_region()
and devm_ioremap() sequence with a single devm_platform_ioremap_resource()
call, which folds the resource lookup, region reservation and mapping into
one step and returns an ERR_PTR on failure, checked with IS_ERR() and
propagated via PTR_ERR().
Switch IRQ acquisition from irq_of_parse_and_map() to platform_get_irq(),
which only retrieves the interrupt the OF/platform core has already set up
rather than transferring mapping ownership to the driver. Drop the now
unneeded of_irq.h include.
This is behaviorally equivalent: the driver already reserved the region
with devm_request_mem_region(), so the non-overlapping reg requirement of
devm_platform_ioremap_resource() was already satisfied.
Drop the now-unused regs_paddr / regs_size locals, which previously only
fed the open-coded request/ioremap calls. Keep the linux/of_address.h
include, as of_iomap() is still used elsewhere in the driver.
Built for PowerPC (mpc512x_defconfig + CONFIG_MTD_NAND_MPC5121_NFC) with
LLVM=1; drivers/mtd/nand/raw/mpc5121_nfc.o compiles cleanly.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
mtdoops_notify_add() allocates oops_page_used when the configured MTD
device is registered. mtdoops_notify_remove() detaches from that device
but leaves the bitmap allocated. If the same MTD device is later
registered again, the add path allocates a new bitmap and overwrites the
old pointer, leaking one vmalloc allocation per remove/add cycle.
This is only visible when the backing MTD device can disappear and be
registered again while mtdoops remains loaded, so the usual static MTD
case does not expose it.
Free the bitmap after unregistering the dumper and flushing the pending
workers, then clear the pointer and page count before a later attach can
allocate fresh state. Clearing the pointer also keeps the module exit
path from freeing the same bitmap a second time after a remove event.
Fixes: be95745f0167 ("mtd: mtdoops: keep track of used/unused pages in an array")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
In mtdswap_add_mtd(), debugfs setup failure after successful blktrans
registration can free mbd_dev twice.
add_mtd_blktrans_dev() initializes the blktrans device reference and
publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the
disk down and drops the blktrans reference; when that reference reaches
zero, blktrans_dev_release() frees the mtd_blktrans_dev.
The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell
through the common cleanup label and called kfree(mbd_dev) again. Clear
the local pointer after deregistration so the common cleanup can still
release the mtdswap state without freeing the blktrans object twice.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: e8e3edb95ce6 ("mtd: create per-device and module-scope debugfs entries")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The AFS v2 parser uses footer[8] to locate the image information block
inside the current erase block, then uses the image information
region_count to walk entries from a fixed local array. The footer offset
and region count come from flash contents and are not checked against the
erase block or the local image-info array before use.
Reject v2 entries whose image information offset would underflow the
erase block calculation, and reject region counts that cannot fit in the
local image-info array before walking region entries.
Fixes: b7cf5e2830bb ("mtd: afs: add v2 partition parsing")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
intel_dg_mtd_probe() allocates region names before enabling runtime PM
and before calling pm_runtime_resume_and_get().
If kasprintf() fails while building a region name, the error path jumps
to err, which calls pm_runtime_put(). At that point there has not been a
successful pm_runtime_resume_and_get() call to balance, so the runtime PM
usage count can underflow.
Jump to err_norpm from the kasprintf() failure path, as the runtime PM
reference has not been acquired yet.
Fixes: 779c59274d03 ("mtd: intel-dg: Fix accessing regions before setting nregions")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Defining a static array in a header results in each .c file that
includes the header (here: drivers/memory/omap-gpmc.c and
drivers/mtd/nand/raw/omap2.c) to contain a copy of that array when
compiled to an object file.
With sizeof(struct of_device_id[3]) ≥ 588 having omap_nand_ids[] twice
just to do two string comparisons is quite some bloat. So move
omap_nand_ids[] to the nand driver which actually needs that array for
its module meta data and do the compatible check by hand.
bloat-o-meter reports for drivers/memory/omap-gpmc.o (ARCH=arm):
add/remove: 1/2 grow/shrink: 1/0 up/down: 28/-588 (-560)
Function old new delta
gpmc_probe_generic_child 2108 2136 +28
omap_nand_ids 588 - -588
Total: Before=18114, After=17554, chg -3.09%
(drivers/mtd/nand/raw/omap2.o doesn't change).
This allows to drop <linux/mod_devicetable.h> from
include/linux/platform_data/mtd-nand-omap2.h (which is my original
motivation for this change). Note that this header isn't needed in the
two drivers because omap-gpmc.c doesn't use any device id struct and for
the nand driver omap2.c of_device_id is already provided via
<linux/platform_device.h>.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Without a full-ID entry, the non-ONFI TC58NVG1S3H falls back to the
generic 0xda extended-ID decoding. It is therefore identified only as a
generic 256 MiB Toshiba NAND. Without a model-specific interface
configuration, the core leaves it in the conservative reset timing mode.
Add its full five-byte ID with the datasheet geometry, OOB size and ECC
requirements. Its interface timings match the mode-4-derived profile
already used by the related TH58NVG2S3HBAI4 and TH58NVG3S0HBAI4, so
share that profile and select it for the new model.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The Realtek external ECC engine driver has an OF match table wired into
its platform driver, but the table is not exported with
MODULE_DEVICE_TABLE().
When the driver is built as a module, the missing OF module alias
prevents automatic module loading from the compatible string.
Add the missing MODULE_DEVICE_TABLE() entry.
Fixes: 3148d0e5b1c5 ("mtd: nand: realtek-ecc: Add Realtek external ECC engine support")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
MDM9607 has QPIC v1.5 that supports the OP_PAGE_READ_ONFI_READ command, but
is missing the rest of the hardware changes in QPIC v2. Add the new
qcom,mdm9607-nand compatible and set it to use has_onfi_read_op without
also setting qpic_version2.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
QPIC v1.5 requires using the OP_PAGE_READ_ONFI_READ command, but is missing
the rest of the hardware changes that are currently covered by the QPIC v2
(qpic_version2) check in the driver. Split that into an extra
has_onfi_read_op feature flag so it can be separately enabled.
No functional change.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Some SoCs (e.g. MDM9607, SDX55) have only a single separately controllable
clock for the NAND controller. The actual clocks in the hardware are
managed by the firmware and turned on all together when needed. In this
case, there is no separate "aon" clock that can be described in the device
tree from the OS point of view.
Make the second "aon" clock optional to avoid an error when it is missing.
For platforms that really need it, the dt-bindings are responsible for
validating that.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add the qcom,mdm9607-nand compatible for the QPIC NAND controller used
inside the MDM9607 SoC.
On MDM9607 and other recent SoCs, the QPIC hardware requires 3 clocks
(core, aon, ahb). However, access to these clocks is restricted to the RPM
firmware that controls the shared power resources for the whole SoC. The
clocks cannot be controlled separately, for the OS view of the hardware
there is only a single RPM_SMD_QPIC_CLK clock that implicitly enables all
of the 3 clocks. The only exception to this are some IPQ* SoC that are not
using RPM, there the clocks are directly controlled by the kernel via the
clock controller (GCC). Require only one clock in the dt-bindings for
MDM9607 to avoid having to define dummy clock entries.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
boards FPGA chip
Add front compatible string "fsl,ls1021aqds-fpga" for on boards FPGA chip
and remove unused property bank-width and device-width, which used for
MTD devices and FPGA is not a MTD devices.
Fix below CHECK_DTBS warning:
rch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0: 'oneOf' conditional failed, one must be fixed:
'bank-width', 'device-width' do not match any of the regexes: '^gpio@[0-9a-f]+$', '^mdio-mux@[a-f0-9,]+$', '^pinctrl-[0-9]+$'
/home/lizhi/source/linux-upstream-pci-ep-arm/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0:compatible: 'oneOf' conditional failed, one must be fixed:
['simple-mfd'] is too short
arch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'bank-width', 'compatible', 'device-width', 'mdio-mux@54', 'ranges', 'reg' were unexpected)
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add fsl,ls1021aqds-fpga compatible string for ls1021a qds's FPGA on board
controller chips, which connect CFI interface.
With following patches to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0: 'oneOf' conditional failed, one must be fixed:
'bank-width', 'device-width' do not match any of the regexes: '^gpio@[0-9a-f]+$', '^mdio-mux@[a-f0-9,]+$', '^pinctrl-[0-9]+$'
/home/lizhi/source/linux-upstream-pci-ep-arm/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dtb: memory-controller@1530000 (fsl,ifc): board-control@3,0:compatible: 'oneOf' conditional failed, one must be fixed:
['simple-mfd'] is too short
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Enable CONFIG_VPA_PMU to be used with KVM
- Initialize starttime at boot for native accounting
- Set CPU_FTR_P11_PVR for Power11 and later processors
- fix memory leak on krealloc failure in papr_init
- Misc fixes and cleanups
Thanks to Amit Machhiwal, Christophe Leroy (CS GROUP), Ethan
Nelson-Moore, Gautam Menghani, Harsh Prateek Bora, Junrui Luo, Mukesh
Kumar Chaurasiya (IBM), Ritesh Harjani (IBM), Rosen Penev, Shrikanth
Hegde, Thorsten Blum, and Yuhao Jiang
* tag 'powerpc-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Remove dead non-preemption code
powerpc/dt_cpu_ftrs: Set CPU_FTR_P11_PVR for Power11 and later processors
powerpc/pseries: fix memory leak on krealloc failure in papr_init
powerpc/uaccess: correct check for CONFIG_PPC_E500 in mask_user_address()
powerpc/vtime: Initialize starttime at boot for native accounting
powerpc/85xx: Add fsl,ifc to common device ids
powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access()
powerpc/pseries/Kconfig: Enable CONFIG_VPA_PMU to be used with KVM
|
|
knav_queue_probe() creates the global qmss debugfs file whose show
callback reads the global knav_qdev state. knav_queue_remove() tears
down the queue manager resources but leaves the debugfs file published.
Save the debugfs dentry in struct knav_device and remove it during
teardown before the resources used by the show callback are released.
While touching the debugfs_create_file() call, spell the unchanged read-
only file mode as 0444.
Fixes: 41f93af900a2 ("soc: ti: add Keystone Navigator QMSS driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260706144706.96313-1-pengpeng@iscas.ac.cn
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Remove the 'supports-clkreq' property from PCIe1 as the standard PCIe
slot on i.MX943 EVK may not have CLKREQ# signal wired, causing
compatibility issues with some PCIe cards.
Fixes: 9a8f11f6f786 ("arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
On the i.MX91 9x9 QSB, CAN1 and MICFIL share pins. A TMUX1574RSVR
analog mux controls the routing: when SEL is driven high, CAN1 is
selected; when SEL is driven low, MICFIL is selected. By default,
SEL is kept low.
To enable CAN1, SEL must be driven high. This is done via the can_fun
function defined in the pinctrl-gpiomux node. CAN1 uses the
TJA1057GT/3 PHY.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add device tree support for the Variscite Symphony carrier board with
the VAR-SOM-MX8 QuadMax system on module.
The Symphony board includes
- uSD Card support
- USB ports and OTG
- Additional Gigabit Ethernet interface
- Uart, SPI and I2C interfaces
- GPIO Expanders
- RTC module
- TPM module
- CAN peripherals
- PCIE support
Link: https://variscite.com/carrier-boards/symphony-board/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add device tree support for the Variscite VAR-SOM-MX8 QuadMax
system on module.
This SOM is designed to be used with various carrier boards.
The module includes:
- NXP i.MX8 QuadMax MPU processor
- Up to 8GB of LPDDR4 memory
- Up to 128GB of eMMC storage memory
- Integrated 10/100/1000 Mbps Ethernet Transceiver
- Codec audio WM8904
- WIFI6 dual-band 802.11ax/ac/a/b/g/n with optional 802.15.4 and Bluetooth
Only SOM-specific peripherals are enabled by default. Carrier board
specific interfaces are left disabled to be enabled in the respective
carrier board device trees.
Link: https://variscite.com/system-on-module-som/i-mx-8/i-mx-8-quadmax-quadplus/var-som-mx8/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add DT compatible strings for Variscite VAR-SOM-MX8 QuadMax SoM and
Variscite Symphony development carrier Board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
In atomic_check, damage handling is not fully evaluated. Another
atomic_check helper could trigger a full modeset and thus invalidate
damage clips.
Allocation of the request/response buffers in appletbdrm depends on
correct damage information. Otherwise it might allocate incorrectly
sized buffers. Allocate the buffers in the driver's begin_fb_access
helper. It runs early during the commit when damage clipping has been
fully evaluated.
v5:
- pass plane state as the old damage-iterator state
v2:
- allocate before drm_gem_begin_shadow_fb_access() to avoid leak on error
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Aditya Garg <gargaditya08@proton.me>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260610152505.260172-6-tzimmermann@suse.de
|
|
Disable the internal SNVS RTC on the Symphony carrier board and use the
external DS1337 RTC instead.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Enable PWM1 on the Symphony carrier board and add the corresponding
pinctrl configuration.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Keep the RGB_SEL line driven low on the Symphony carrier board.
This avoids leaving the line floating and ensures the board remains in
the expected display configuration.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Mark the Symphony carrier board GPIO keys and capacitive touchscreen as
wakeup sources.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Enable I2C4 on the Symphony carrier and add pinctrl configuration,
including GPIO-based bus recovery support.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add support for the TPM2 device on the VAR-SOM Symphony carrier board.
The ST33K TPM2 is connected over I2C, and A PCA6408 GPIO expander is
used to control the reset signal required to release the TPM from reset.
Add the PCA6408 GPIO expander and the ST33K TPM2 device node.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Enable the FlexSPI controller on the VAR-SOM-MX8MN and add the
corresponding pin multiplexing configuration.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The VAR-SOM-MX8MN module does not provide an onboard USB connector.
The complete USB OTG description, including the Type-C role switch
configuration, is already provided by the Symphony carrier board device
tree. Remove the duplicate USB OTG node from the SOM dtsi to avoid
describing the same hardware in two places.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The VAR-SOM-MX8MN currently integrates the NXP IW61x wireless module,
providing WiFi over SDIO and Bluetooth over UART.
Move the wireless module configuration out of the base
imx8mn-var-som.dtsi and provide dedicated variant includes.
The IW61x configuration is moved to imx8mn-var-som-wifi-bt-iw61x.dtsi
and used by the Symphony evaluation board device tree.
A separate imx8mn-var-som-wifi-brcm-legacy.dtsi include is added to keep
the configuration for the legacy Broadcom SDIO WiFi module used on
earlier SOM revisions.
To preserve compatibility with older SOM revisions, add a separate
imx8mn-var-som-symphony-legacy.dtb, which disables the IW61x setup and
applies the Broadcom-specific configuration.
The Broadcom-based SOM revision is no longer in production, but support
is kept for existing users.
This keeps the VAR-SOM-MX8MN support aligned with the existing
VAR-SOM-MX8MM implementation.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Add support for the Microchip MCP251xFD CAN-FD controller connected
to the SPI bus on the i.MX8MN VAR-SOM.
The controller uses a 40 MHz external oscillator and requires an
interrupt line and a dedicated RX interrupt GPIO.
Add the fixed clock, the MCP251xFD device node with the required
properties, and the corresponding pinctrl configuration.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The VAR-SOM-MX8MN can integrate the WM8904, a high-performance
ultra-low-power stereo codec optimized for portable audio applications.
Add the WM8904 device to the appropriate I2C bus, enable the SAI
peripheral, and introduce the sound node to expose the sound card to the
system.
Add I2C3 recovery gpio properties.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Update the FEC Ethernet controller on the i.MX8MN VAR-SOM to match the
latest SOM hardware revision using the integrated MaxLinear MXL86110 PHY.
Add the PHY VDDIO supply regulator and adjust reset timings.
The PHY LED signals originate on the SOM, but the actual LEDs are part
of the carrier implementation (RJ45 connector). Move the LED
configuration to the Symphony carrier device tree, matching the
evaluation board LED wiring.
Wake-on-LAN via magic packet is not supported at the VAR-SOM level and
is therefore not enabled in the SOM device tree nor in the official
evaluation carrier board configuration (symphony).
Designs requiring WoL support may enable it in their own carrier-specific
device trees if properly integrated at the hardware level.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Reformat the fsl,pins tables in the i.MX8MN VAR-SOM device tree to use
consistent column alignment across all pinctrl groups.
Align the entries to match the formatting already used in the
pinctrl_fec1 group, which contains the longest pin definitions,
for improved readability and consistency.
No functional changes intended.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The VAR-SOM-MX8MN module does not provide an onboard SD card slot.
USDHC2 is routed to the SD card slot on the carrier boards.
Move the USDHC2 node and pinctrl configuration from the SOM device tree
to imx8mn-var-som-symphony.dts and imx8mn-rve-gateway.dts, keeping the
SOM dtsi limited to hardware present on the module itself.
Add the required off-on-delay-us property for the USDHC2 regulator on
the Symphony carrier board.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
The VAR-SOM-MX8MN module does not provide an onboard debug console.
UART4 is routed and exposed only on the Symphony carrier board, while
custom carrier designs may choose to expose a different UART.
Move the UART4 node from the SOM device tree to the
imx8mn-var-som-symphony.dts, keeping the SOM dtsi limited to hardware
present on the module itself.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
|
|
Double the fractional part of the horizontal scale factor
for the purposes of min_cdck calculation. This bumps the min
CDCLK sufficiently to overcome some kind of 2 PPC granularity
issue. Without this CDCLK may end up being too low and we get
underruns with certain horizontal downscale factors.
The current Bspec formula calls for doubling only the
fractional part below 0.5, and rounding it down to a
unit fraction. But that formula does not result in a
sufficient CDCLK bump in a lot of cases. Empirical evidence
supports doubling the entire fractional part, so let's just
do that while we wait for further analysis from the hardware
team.
Also note that the position of the scaler output window also
seems to matter. If the output is near the left edge of the
screen then lower CDCLK is sufficient, but moving the output
window further to the right causes underruns unless CDCLK is
also bumped. Some prefill happening during hblank already?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260715120926.10786-5-ville.syrjala@linux.intel.com
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
|
|
We'll need to do additional adjustments to the pipe pixel rate
for the purposes of min CDCLK calculations. Add a new
crtc_state->pixel_rate_cdclk for that purpose. We'll leave the
original crtc_state->pixel_rate for data rate related calculations
since we presumably don't need those extra adjustments there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260715120926.10786-4-ville.syrjala@linux.intel.com
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
|
|
We'll need to check for the "does the platform do 2 pixels per clock?"
thing in a few places. Add a feature macro for it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260715120926.10786-3-ville.syrjala@linux.intel.com
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
|
