| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When compiling the AMDGPU display driver for 32-bit architectures,
the linker reports undefined reference to `__udivdi3` in functions
get_dp_dto_frequency_100hz() and dcn401_get_dp_dto_frequency_100hz().
This is because the code uses 64-bit division (/) on 32-bit systems,
which GCC cannot handle directly and instead tries to call the missing
__udivdi3 helper function.
Replace the raw division with div_u64(), the kernel's standard 64-bit
division helper, to avoid the link error.
Signed-off-by: Linlin Yang <yanglinlin@kylinos.cn>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0421fc6ab3a8514e99156ff3c2cee13ee9af3fa7)
Cc: stable@vger.kernel.org
|
|
Currently the contents of IBs are abruptly cut off and don't
show the full contents. This patch makes sure to reserve
space for those contents too so they may be printed.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e2c0821509fed754e8c31d5053d152fbb3484a5)
Cc: stable@vger.kernel.org
|
|
These are in the dmesg logs but are missing from devcoredumps.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fed7aa36d79802c3e02acd05aeae8b0a877e47c2)
Cc: stable@vger.kernel.org
|
|
amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table()
but never releases it. acpi_get_table() takes a reference on the
table (incrementing its validation_count and mapping it on the 0->1
transition); without a paired acpi_put_table() the mapping is leaked
on every call, whether or not a matching VBIOS image is found.
Route all exit paths after the table is acquired through a common
acpi_put_table(). The VBIOS image is copied out with kmemdup() before
the table is released, so it remains valid for the caller.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260708193518.702584-3-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ca5988682b4cba4cd125a0fa99b2de1239164ae4)
Cc: stable@vger.kernel.org
|
|
On systems where PCI bus renumbering occurs (e.g. pci=realloc,
resource conflicts), the runtime bus number may differ from the
BIOS POST bus number recorded in the VFCT table. This causes
amdgpu_acpi_vfct_bios() to fail finding the VBIOS even though
the correct device entry exists.
Introduce amdgpu_acpi_vfct_match() which treats the bus number
as a soft filter: vendor/device/function identity is the hard
requirement, while exact bus match is the preferred path. When
bus numbers disagree but device identity matches, accept the
VFCT entry and log a dev_notice for diagnostics.
Reported-by: Oz Tiram <oz@shift-computing.de>
Closes: https://lore.kernel.org/amd-gfx/20260621173211.28443-1-oz@shift-computing.de/
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260708193518.702584-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 11c141672045ffc0187aa604f2c0f597bc334fb2)
Cc: stable@vger.kernel.org
|
|
amdgpu_bo_create_reserved() only allocates a new BO when
*bo_ptr (struct amdgpu_bo **bo_ptr as input parameter) is
NULL, it simply skips creation when *bo_ptr is non-NULL.
But it unconditionally reserves, pins, gart allocates
and maps the BO afterwards.
When the same non-NULL BO pointer is passed in again,
for example firmware buffers that live in adev and are
re-loaded on every resume / cp_resume / start
under AMDGPU_FW_LOAD_DIRECT, amdgpu_bo_pin() just increases
pin_count unconditionally, however the matching teardown only unpins
once, so pin_count never drops to zero, so TTM is not able
to move, swap or evict a BO, causing BO leaks.
This commit fixes this issue by only pinning the bo
once at creation, and repeated calls no longer
take additional pin references.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ddc0ae76202c447b6aec61e907b852bc94671cf)
Cc: stable@vger.kernel.org
|
|
pre_reset only force-completes fences of MAPPED queues. A queue in any
other state (e.g. mid-eviction) keeps its last_fence pending; after a
GPU reset that fence never signals, so the eviction/suspend worker and
process teardown (amdgpu_evf_mgr_flush_suspend) wait on it forever and
wedge the machine:
INFO: task kworker/6:28 blocked for more than 120 seconds.
Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu]
Call Trace:
dma_fence_wait_timeout+0x7e/0x130
amdgpu_userq_evict+0x67/0x140 [amdgpu]
amdgpu_eviction_fence_suspend_worker+0xd8/0x160 [amdgpu]
process_scheduled_works+0xa6/0x420
Force-complete every queue's fence regardless of state. The unmap and
mark-hung step stays gated on MAPPED, since unmapping a queue that is
not mapped is invalid.
Fixes: 290f46cf5726 ("drm/amdgpu: Implement user queue reset functionality")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9102b39fa924dcc3dc75a3137bfa9633c40b88c0)
Cc: stable@vger.kernel.org
|
|
set_pipe_unlock_order needs to be set to true for the pipes to be unlocked
in correct order to avoid det overallocation
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 183bbded999a70c5996e8f399fa8790568d71112)
|
|
set_pipe_unlock_order needs to be set to true for the pipes to be unlocked
in correct order to avoid det overallocation
Reviewed-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 198663d035cc439eb48844a2da66f6ae1b0de303)
|
|
[Why]
FWTS autobrightness fails on eDP panels because actual_brightness can
read higher than the advertised max_brightness (e.g. 63576 vs 62451).
The conversion helpers expose the firmware PWM range to userspace as
[0..max]. But max_brightness is advertised as (max - min), which is
smaller. So reading the level can return a value above max_brightness.
This regressed in commit 4b61b8a39051 ("drm/amd/display: Add debugging
message for brightness caps"), which changed max_brightness to
(max - min) and undid commit 8dbd72cb7900 ("drm/amd/display: Export full
brightness range to userspace").
[How]
Advertise max_brightness as max, and scale the initial AC/DC brightness
against max too. Update the KUnit expectations to match.
Fixes: 4b61b8a39051 ("drm/amd/display: Add debugging message for brightness caps")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd9e2b5b0473c75abc0f4134dfe79ecbfb16610d)
Cc: stable@vger.kernel.org
|
|
[why]
The 8K120/8K240 timings live in DisplayID extension blocks 2 and 3
of this EDID. The EDID is a 4-block (512-byte) HDMI 2.1 EDID
that uses HF-EEODB.
drm core reads and parses this correctly, but amdgpu rebuilds its own copy.
Only 2 of 4 blocks were copied into sink->dc_edid, that leads to
drm_edid_connector_add_modes() never sees blocks 2 and 3.
[how]
Directly populate edid_blob_ptr with a blob whose length is the full,
and HF-EEODB-aware size.
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 11a90eaf5c808ba800249dda0d481c35d0888589)
|
|
No functional changes. Just clean up a conceptual mismatch.
Based on feedback on the NUTMEG code in DC, the
preferred_link_setting is meant to force the DP link to a
specific setting, meaning both the link rate and lane count
should be locked to an exact value. What NUTMEG needs is
a lower bound on the link rate, which is not the same concept.
Implement this as a HW workaround flag instead.
Suggested-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 871ceb853841bcaa4e6cec3723b16c4887a760be)
Cc: stable@vger.kernel.org
|
|
When there is a preferred link rate setting, it needs to be
applied to both the current and initial link rate.
This was regressed by a "coding style" fix, which caused
the current link rate to not respect the preferred value.
This commit restores the functionality of NUTMEG,
the DP bridge encoder found on old APUs such as Kaveri.
Fixes: a62346043a89 ("drm/amd/display: Fix coding style issue")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5465
Cc: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e78b0a367f8690b682029d90e75308dc84ed51de)
Cc: stable@vger.kernel.org
|
|
total_cwsr_size was computed in 32-bit before being used as a BO/SVM
allocation size.
With large ctx_save_restore_area_size and debug_memory_size
multiplied by the XCC count, the product can wrap,
yielding an undersized CWSR save area that firmware later overruns.
Promote total_cwsr_size to u64 and use check_add_overflow()/
check_mul_overflow() in both kfd_queue_acquire_buffers() and
kfd_queue_release_buffers().
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608)
Cc: stable@vger.kernel.org
|
|
[why]
DCN42B is missing some register masks, which are causing errors in dmesg.
[how]
Make DCN42B reuse the DCN42 register lists, and add the missing defines manually.
Fixes: 64142f9d51af ("drm/amd/display: Fix DCN42 null registers & register masks")
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7d69145907cdefcbd39a70a31eefd30919af9f1)
|
|
GC 11.7.0 and 11.7.1 should map to AMDGPU_FAMILY_GC_11_5_4 for DCN42.
Fixes: cf591e67c095 ("drm/amdgpu: add support for GC IP version 11.7.0")
Fixes: a928d8d81ec5 ("drm/amdgpu: add support for GC IP version 11.7.1")
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f8ee6447e7ec1d75d6663c817e45566dd01f440b)
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
Couple of display fixes (NV12 for bigjoiner and Watermark clear
on plane disable) along with couple of GT selftests fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/alp3ks0K1ZsxUC05@intel.com
|
|
nouveau_pmops_runtime_idle()
The device's last busy timestamp was set in a wrapper function since
the commit 08071e64cb642ae19ebd6ffeb13b4f3d130b5860 ("PM: runtime:
Mark last busy stamp in pm_runtime_autosuspend()").
Thus delete a pm_runtime_mark_last_busy() call before
a pm_runtime_autosuspend() call.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/e3631a8e-b4a4-4e14-822d-2199f1576cc9@web.de
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix BO prefetch with CONSULT_MEM_ADVISE_PREF_LOCK (Himal)
- Hold a dma-buf reference for imported BOs (Nitin)
- Fix writable override for CRI (Alexander)
- Fix VF CCS attach/detach race with in-flight BO moves (Matthew Brost)
- Fix WOPCM size for LNL+ (Daniele)
- Reset current_op in xe_pt_update_ops_init (Zongyao Bai)
- Keep scheduler timeline name alive (Arvind)
- Hold device ref until queue teardown completes (Arvind)
- Disable display in admin only PF mode (Satyanarayana)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aln1tRUXZJ_qzD65@fedora
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v7.2-rc4:
- Fix UAF in host1x, amdxdna.
- Handle invalid firmware log in ivpu.
- Fix error handling in panthor.
- Handle NULL pages and backup handles in ttm_pool_backup() correctly.
- Reject more invalid amdxdna command submissions.
- Improve unmap and error handling on gpusvm.
- Fix virtio deadlock and invalid gem detach.
- Fix wrong read in ivpu.
- Always synchronize for CPU in begin_cpu_udmabuf.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/7f10281e-88f5-4be5-8b42-367e7ce7c547@linux.intel.com
|
|
Amery Hung says:
====================
Fix leftover issues of the unify bpf_call_arg_meta patchset
Hi,
This patchset fixes preexisting issues flagged by Sashiko when reviewing
the patchset unifying bpf_call_arg_meta [0].
[0] https://lore.kernel.org/bpf/20260715064047.1793790-1-ameryhung@gmail.com/
====================
Link: https://patch.msgid.link/20260715172127.2416388-1-ameryhung@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
check_kfunc_call() reads meta.func_name when bpf_fetch_kfunc_arg_meta()
returns -EACCES, but that error can come from fetch_kfunc_meta() (e.g.
fd_array_get_btf() rejecting BTF binding for a signed program) before
meta is memset(), leaving it uninitialized and risking a garbage deref
in verbose().
Move the memset() to the start of bpf_fetch_kfunc_arg_meta() so meta is
zeroed on every error return. The intended "not allowed" -EACCES path
still sets func_name first, so its message is unchanged.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260715172127.2416388-3-ameryhung@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
For a bloom filter, the value argument of bpf_map_peek_elem() is always
an input. Therefore, the verifier should not allow passing uninitialized
stack memory to it to avoid information leak.
bpf_map_peek_elem() tags its value argument ARG_PTR_TO_MAP_VALUE |
MEM_UNINIT, telling the verifier the callee fills the buffer. This holds
for queue/stack maps, but not for a bloom filter, which reads the buffer
as an input to test set membership and never writes it.
As a result, a program can pass an uninitialized stack buffer to
bpf_map_peek_elem() on a bloom filter. The verifier accepts it and marks
the buffer initialized on return, letting the program read back leftover
kernel stack memory. Bloom maps require CAP_BPF to create, so this is a
CAP_BPF-gated stack infoleak that bypasses the boundary CAP_BPF is meant
to enforce (arbitrary kernel reads are gated behind CAP_PERFMON).
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260715172127.2416388-2-ameryhung@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Pull bpf fixes from Kumar Kartikeya Dwivedi:
- Fix a UAF in socket clone early bailout paths (Matt Bobrowski)
- Reject unhashed UDP sockets on sockmap update to prevent refcount
leaks (Michal Luczaj)
- Account for receive queue data in FIONREAD on sockmap sockets without
a verdict program (Mattia Meleleo)
- Reject negative constant offsets for verifier buffer pointers (Sun
Jian)
- Fix for tracing of kfuncs with implicit arguments (Ihor Solodrai)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover tracing implicit kfunc args
bpf: Fix tracing of kfuncs with implicit args
selftests/bpf: Cover negative buffer pointer offsets
bpf: Reject negative const offsets for buffer pointers
selftests/bpf: Test FIONREAD on a sockmap socket without a verdict program
bpf, sockmap: Account for receive queue in FIONREAD without a verdict program
selftests/bpf: Fail unbound UDP on sockmap update
selftests/bpf: Adapt sockmap update error handling
bpf, sockmap: Reject unhashed UDP sockets on sockmap update
selftests/bpf: Ensure UDP sockets are bound
bpf: Fix UAF in sock clone early bailouts
|
|
Respell the vio launch loop to use the existing vio_count
value. The repair completion is not guaranteed to persist
after all of the metadata_vios are launched. This can not
currently cause problems due to the way vio callbacks are
handled, but it is technically not safe to access those
fields.
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
get_cache_segment() scans the segment map up to cache->n_segs, the
physical device segment count, but cache_segs_init() only initializes
the first cache_info->n_segs segments. A crafted image with
cache_info->n_segs smaller than the device count leaves the remaining
pcache_cache_segment structs zeroed (segment.data == NULL), and the
allocator can hand one to cache_kset_close(), which writes through the
returned segment's data pointer with no NULL check.
Bound the allocator's search to cache_info->n_segs so only initialized
segments are ever returned. A conforming cache sets n_segs equal to the
device segment count, so this rejects nothing legitimate.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The writeback worker follows the persisted dirty_tail chain, which is
decoded from the cache device independently of the key_tail chain that
cache_replay() walks and bounds. A crafted image, whose on-media fields are
authenticated only by a crc32c with a fixed seed, can aim dirty_tail at a
chain of last ksets that never terminates, so cache_writeback_fn() re-arms
itself with no delay forever.
Walk the dirty_tail chain once at load with the same hop cap cache_replay()
uses and fail the table load with -EIO if it does not reach an end within
n_segs hops.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
seg_num is read from the crc32c-only superblock, so whoever supplies the
cache device on a table load (CAP_SYS_ADMIN) controls it. It sizes
cache->segments[] and is the value every later on-media segment id is
bounded against, yet it is never checked against the device. Because
cache_dev->mapping is the direct map of the pmem, CACHE_DEV_SEGMENT() for
a segment id past the device resolves to ordinary kernel memory beyond
the mapping; a new-cache init reaching such an id has cache_seg_init() ->
cache_dev_zero_range() memset() 12 KiB over that memory -- an
out-of-bounds write into the kernel heap at table load. A zero seg_num
makes the segment allocations ZERO_SIZE_PTR.
Reject a seg_num that is zero, larger than the device can hold, or larger
than PCACHE_CACHE_SEGS_MAX before it is used.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The tail-kset read in cache_replay(), the writeback worker and the GC
worker bounds its length by PCACHE_SEG_SIZE - seg_off, the raw segment
size rather than the data region. A tail near the segment end reads past
the segment data into the following control area.
Clamp the read to cache_seg_remain(), the data region.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
cache_key_decode() takes a key's logical off from the cache device and
later indexes req_key_tree->subtrees[] by it in get_subtree(). An off
past the device forms a subtree pointer outside the array, which
rb_insert() writes through during replay.
Reject a key of zero length, or whose off+len (computed in 64 bits)
exceeds the device size, before it is used.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
cache_replay() follows the on-media last-kset chain by next_cache_seg_id
with no cond_resched(). A forged chain that points back into a segment it
has already visited makes the replay loop follow it forever.
Cap the last-kset hops at cache->n_segs; a valid chain visits each segment
at most once.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
cache_replay(), the writeback worker and the GC worker read a kset of
get_kset_onmedia_size() bytes and advance the position by it. A forged
key_num makes that size exceed the segment's remaining space, so the
advance walks past the segment and trips the cache_pos_advance() BUG_ON.
Reject a kset whose on-media size exceeds cache_seg_remain() before use.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
cache_pos_decode() takes the persisted key_tail and dirty_tail seg_off from
the cache device and addresses within the segment with it. A seg_off at or
past the segment data_size, controllable by whoever supplies the device
(CAP_SYS_ADMIN), reads past the segment data.
Reject a decoded seg_off that is not below the segment data_size.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Two more fields decoded from the cache device go unbounded. The kset
key_num drives cache_kset_crc() and the replay loop in cache_replay(),
the writeback worker and the GC worker, but only the magic and a
fixed-seed CRC are checked first, so a non-last kset whose key_num exceeds
the PCACHE_KSET_KEYS_MAX buffer reads past its end before the CRC compare.
A key's intra-segment offset and length in cache_key_decode() are taken
verbatim, so a key running past its segment is replayed into the cache
tree and the data CRC check and every later read hit then copy adjacent
persistent memory into the caller's bio -- an out-of-bounds read that
leaks to user space. Both fields are controlled by whoever supplies the
cache device (CAP_SYS_ADMIN); the CRC seed is public.
Add kset_onmedia_valid() to bound key_num before any kset read, and
reject a key whose offset plus length, computed in 64 bits, exceeds the
segment data_size. Valid metadata is unaffected.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
cache_segs_init() iterates cache_info->n_segs times indexing
cache->segments[], which is sized to the cache device geometry, and
get_seg_id() takes each segment id from the on-media cache_info and the
per-segment next_seg link. Both come from cache device metadata that is
only CRC-protected with a fixed public seed, so whoever supplies the
cache device on a table load (CAP_SYS_ADMIN) controls them: an oversized
n_segs or an out-of-range id drives an out-of-bounds access of
cache->segments[] and a wild CACHE_DEV_SEGMENT() pointer into the device
mapping -- an out-of-bounds read and write from on-disk data.
Reject an n_segs that exceeds the device segment count and a segment id
that is out of range before either is used. Valid metadata is unaffected.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
cache_pos_decode(), cache_key_decode() and the last-kset branches of
cache_replay(), the writeback worker and the GC worker take a cache
segment id from the cache device metadata and index cache->segments[]
with it without checking it against cache->n_segs. That metadata is only
CRC-protected with a fixed public seed, so whoever supplies the cache
device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range
value forms a wild pcache_cache_segment pointer that is dereferenced and
written through -- an out-of-bounds read and write driven by on-disk data.
Add cache_seg_id_valid() and reject an out-of-range id at each decode
site, failing the operation with -EIO instead of indexing past the array.
Bound the id against the initialized-segment count (cache_info.n_segs)
rather than the physical device total. A forged cache_info.n_segs below
seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed
structs whose data pointer is NULL, so a forged id in that window would
still be dereferenced. A later patch guarantees cache_info.n_segs <=
seg_num, and a driver-created cache sets the two equal, so valid images
are unaffected.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A single SELinux patch to correct a problem with the overlayfs mmap()
and mprotect() fixes from earlier this year where we inadvertenly
included an additional SELinux execmem permission check on some
operations"
* tag 'selinux-pr-20260717' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix incorrect execmem checks on overlayfs
|
|
A kprobe can be hit while another kprobe is in KPROBE_HIT_SS state. This
can happen when tracing or perf code runs from the debug exception path
while the first kprobe is preparing or executing its out-of-line
single-step instruction.
Currently arm64 treats a kprobe hit in KPROBE_HIT_SS as unrecoverable,
the same as a hit in KPROBE_REENTER. This is too strict. A hit in
KPROBE_HIT_SS is still a one-level reentry and can be handled by saving
the current kprobe state and setting up single-step for the new probe,
just like reentry from KPROBE_HIT_ACTIVE or KPROBE_HIT_SSDONE.
The truly unrecoverable case is hitting another kprobe while already in
KPROBE_REENTER, because the reentry save area has already been consumed.
Move KPROBE_HIT_SS to the recoverable reentry cases and leave
KPROBE_REENTER as the unrecoverable nested reentry case.
This change also requires saving saved_irqflag in struct prev_kprobe.
When a nested kprobe calls kprobes_save_local_irqflag(), it overwrites
kcb->saved_irqflag with the currently masked DAIF value, losing the
outer kprobe's original DAIF state. Without this fix, when the outer
kprobe's single-step finishes, kprobes_restore_local_irqflag() applies
the wrong DAIF mask and leaves interrupts permanently disabled.
Extend struct prev_kprobe with a saved_irqflag field and save/restore it
alongside kp and status. This ensures the outer kprobe's original
interrupt state is preserved across reentry.
This mirrors the x86 fix in commit 6a5022a56ac3
("kprobes/x86: Allow to handle reentered kprobe on single-stepping").
Signed-off-by: Pu Hu <hupu@transsion.com>
Signed-off-by: Hongyan Xia <hongyan.xia@transsion.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
kprobe_fault_handler() currently treats any page fault taken while in
KPROBE_HIT_SS or KPROBE_REENTER state as a kprobe single-step fault. This
assumption does not hold: perf or tracing code may run from the debug
exception path during the single-step window and take its own page fault.
When the fault is handled as a kprobe fault, the PC is rewritten to the
probe address, corrupting the exception recovery context for the real
fault. A typical reproducer is running perf with preemptirq tracepoints
and dwarf callchains while a kprobe is installed on a frequently
executed function.
Fix this in two layers:
1. At function entry, bail out immediately for simulated kprobes
(ainsn.xol_insn == NULL), since they have no XOL slot and any fault
taken during their execution cannot be a single-step fault.
2. For kprobes with an XOL slot, only handle the fault when the
faulting PC matches the XOL instruction address. Faults from any
other PC are left to the normal page fault handler.
This follows the same principle as the x86 fix in commit 6381c24cd6d5
("kprobes/x86: Fix page-fault handling logic").
Signed-off-by: Pu Hu <hupu@transsion.com>
Signed-off-by: Hongyan Xia <hongyan.xia@transsion.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Fix a build error in certain configurations
- Clarify some parts of the documentation
- Remove unused code that I forgot to remove in commit cf52058dcdd9
("lib/crypto: powerpc/md5: Drop powerpc optimized MD5 code")
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: aes - Fix conditions for selecting MAC dependencies
lib/crypto: docs: Improve introduction sentence
lib/crypto: docs: Fix some sentence fragments
lib/crypto: md5: Remove support for md5_mod_init_arch()
|
|
Sashiko (locally) reports a logical issues in mmio_guard_ioremap_hook()
mmio_guard_ioremap_hook() attempts to handle unaligned addresses and
sizes. However, aligning the start address before adding the size, might
shift the end to the page before.
Fixes: 0f1269495800 ("drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Wireless, IPsec, Netfilter and Bluetooth.
Current release - new code bugs:
- netfilter: flowtable: use correct direction to set up tunnel route
Previous releases - regressions:
- wifi:
- mac80211:
- free AP_VLAN bc_buf SKBs outside IRQ lock
- defer link RX stats percpu free to RCU
- fix double free on alloc failure
- cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock
- ipv4: free fib_alias with kfree_rcu() on insert error path
- sched: act_tunnel_key: Defer dst_release to RCU callback
- xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
- bluetooth: fix locking in unpair_device/disconnect_sync
- can: add locking for raw flags bitfield
- openvswitch: reject oversized nested action attrs
- eth:
- bnxt_en: handle partially initialized auxiliary devices
- ppp: defer channel free to an RCU grace period to fix UAF
Previous releases - always broken:
- netfilter: xt_nat: reject unsupported target families
- wifi:
- brcmfmac: fix heap overflow on a short auth frame
- cfg80211: add missing FTM API validation
- xfrm:
- reject optional IPTFS templates in outbound policies
- policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
- bluetooth: revalidate LOAD_CONN_PARAM queued update
- can: fix lockless bound/ifindex race and silent RX_SETUP failure
- eth: mlx5: free mlx5_st_idx_data on final dealloc"
* tag 'net-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n
llc: fix SAP refcount leak when creating incoming sockets
selftests: netconsole: only restore MAC when it changed on resume
bnxt_en: Handle partially initialized auxiliary devices
sctp: fix auth_hmacs array size in struct sctp_cookie
net/sched: act_tunnel_key: Defer dst_release to RCU callback
dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync()
tcp: fix TIME_WAIT socket reference leak on PSP policy failure
net/mlx5: free mlx5_st_idx_data on final dealloc
can: isotp: serialize TX state transitions under so->rx_lock
can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER
can: isotp: use unconditional synchronize_rcu() in isotp_release()
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
can: bcm: fix stale rx/tx ops after device removal
can: bcm: add missing device refcount for CAN filter removal
can: bcm: validate frame length in bcm_rx_setup() for RTR replies
can: bcm: extend bcm_tx_lock usage for data and timer updates
can: bcm: add missing rcu list annotations and operations
can: bcm: fix CAN frame rx/tx statistics
...
|
|
io_install_bpf() only rejects a second registration on the ctx side
(ctx->bpf_ops) and sets the per-map back-pointer ops->priv
unconditionally. The struct_ops link path never advances a map past
BPF_STRUCT_OPS_STATE_READY, so the same io_uring_bpf_ops map can be
registered more than once, and bpf_io_reg() re-resolves the target ring
via fget(ops->ring_fd) on every call. A caller can therefore point the
same ring_fd at a different io_ring_ctx between two BPF_LINK_CREATE
calls.
The second registration passes the ctx->bpf_ops check (the new ctx has
none) and overwrites ops->priv, orphaning the first ctx. Teardown
(io_eject_bpf()/bpf_io_unreg()) only reaches a ctx through ops->priv, so
the orphaned ctx is never torn down: its ctx->loop_step keeps pointing
into the struct_ops trampoline, which is freed once the map is gone. A
later io_uring_enter() on the orphaned ring then calls the dangling
ctx->loop_step from io_run_loop() -- a use-after-free of freed
executable memory, reachable by a task with CAP_BPF + CAP_PERFMON.
Reject registration when ops->priv is already set, as hid_bpf_reg()
does for its struct_ops.
Cc: stable@vger.kernel.org
Fixes: 98f37634b12b ("io_uring/bpf-ops: implement bpf ops registration")
Signed-off-by: Woraphat Khiaodaeng <worapat.kd2@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260717154537.129736-1-worapat.kd2@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The io.latency doc says the io.stat delay field counts microseconds. The
field is delay_nsec and is reported in nanoseconds. Refer to it by its
real name and correct the unit.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The test_cgcore_no_internal_process_constraint_on_threads test has two
back-to-back cg_enter_current(root) calls in its cleanup path.
A single cg_enter_current() call atomically migrates the entire thread
group to the target cgroup even for multi-threaded processes, and this
test creates no extra threads or child processes that would require a
second migration attempt. The second call is a harmless no-op once the
process is already in the root cgroup, but it is redundant and
inconsistent with the cleanup logic used in all other cgroup core
selftest cases.
Remove the duplicate call to clean up the code. No functional change is
intended.
Signed-off-by: Jian Guo <guojian@kylinos.cn>
Acked-by: Michal Koutný <mkoutny@suse.com>
Tested-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
around hardware bug
On some NXP chipsets, disabling Root Port MSI/MSI-X Capabilities blocks
MSIs originating from Endpoints from reaching the iMSI-RX controller.
To address this hardware bug, commit 3a4e8302e72f ("PCI: imx6: Keep Root
Port MSI capability with iMSI-RX to work around hardware bug") preserves
Root Port MSI and MSI-X Capabilities on i.MX7D, i.MX8MM, and i.MX8MQ
when iMSI-RX is in use.
The same applies to i.MX6Q, i.MX6QP, and i.MX6SX, so preserve Root Port
MSI/MSI-X Capabilities there as well.
Note that preserving these Capabilities means Root Port-originated MSIs
such as AER and PME won't be received due to separate hardware limitations.
Users may need to use workarounds such as passing the 'pcie_pme=nomsi'
command-line parameter.
Fixes: f5cd8a929c825 ("PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller")
Signed-off-by: Soeren Moch <smoch@web.de>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: stable@vger.kernel.org # 7.0+
Link: https://patch.msgid.link/20260717033203.2965045-1-hongxing.zhu@oss.nxp.com
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The Focaltech ft3d81 is fully compatible with the ft8112 i.e.
it uses the same I2C-HID protocol and the same power-on/reset sequencing,
DT nodes for boards carrying an ft3d81,can therefore bind to the existing
ft8112 driver without any additional changes.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Pradyot Kumar Nayak <pradyot.nayak@oss.qualcomm.com>
Link: https://patch.msgid.link/20260717-add_focaltech_ft3d81_touchscreen_support-v4-1-5dd091e25801@oss.qualcomm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
suspend
The driver implements debounce protection using a timer-based mechanism:
when a key interrupt occurs, a timer is scheduled to verify the key state
after DEBOUNCE_TIME before reporting the event. This works well during
normal operation.
However, key press events can be lost during system resume on platforms
like i.MX8MQ-EVK because:
1. During the no_irq resume phase, PCIe driver restoration can take up to
200ms with IRQs disabled.
2. The power key interrupt remains pending during the no_irq phase.
3. If the key is released before IRQs are re-enabled, the timer eventually
runs but sees the key as released and skips reporting the event.
To prevent event loss during system suspend, set a pending_press flag in
the interrupt handler and report the press event from the timer callback
when the flag is set. This avoids out-of-order event delivery and keeps
the existing timer-based debounce mechanism for normal operation.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-4-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
