| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
bpf_arena_free_pages() accepts scalar arena addresses. The runtime
masks the address to the low 32 bits and reconstructs a full user
address from the arena base before returning the range to the arena
free tree.
When the scalar value is below the low 32 bits of the arena base,
full_uaddr falls below user_vm_start. The existing upper-end clipping
then turns this into an out-of-range free-tree offset. A later
allocation can reuse that offset and return an address below the arena
mapping.
Reject such frees before computing the clipped range.
Fixes: 317460317a02a ("bpf: Introduce bpf_arena.")
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717-c10-031-public-bpf-next-v2-b4-v2-1-54b555443a7c@mails.tsinghua.edu.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
CONFIG_IPV6_SEG6_LWTUNNEL is currently enabled in each arch-specific
config fragment for the BPF selftests. Commit 33a971d549d8
("selftests/bpf: Add LWT encap tests for skb metadata") has enabled this
config in the generic config as well, resulting in a small warning when
configuring a kernel for selftests:
$ cat tools/testing/selftests/bpf/{config,config.vm,config.x86_64}>.config
$ make olddefconfig
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/confdata.o
HOSTLD scripts/kconfig/conf
config:269:warning: override: reassigning to symbol IPV6_SEG6_LWTUNNEL
#
# configuration written to .config
#
Now that IPV6_SEG6_LWTUNNEL is set in the general config fragment, drop
it from the arch-specific fragments.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/bpf/20260709-testing-fragments-v1-1-65244b0650ff@bootlin.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fairly routine driver fixes, nothing too remarkable"
* tag 'spi-fix-v7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Fix indirect write timeout when DMA read mode is enabled
spi: dw-dma: Wait for controller idle before completing Tx
|
|
ub->completion is only re-armed by a successful START_USER_RECOVERY. If
the ublk server sends END_USER_RECOVERY without one - e.g. its START
failed with -EBUSY and the error was ignored - the wait is satisfied by
the stale completion of the previous recovery cycle, and the device is
marked LIVE and the requeue list kicked while the FETCH stream is still
running and ubq->canceling is still set. The kick redispatches a
previously requeued request, __ublk_queue_rq_common() sees ->canceling
and parks it again via __ublk_abort_rq(), and after the last FETCH
clears ->canceling nothing ever kicks the requeue list again: the
request is stranded there while holding its tag. If it is the flush
machinery's flush_rq, every subsequent fsync piles up in uninterruptible
sleep and teardown hangs on tag draining. This matches a report of a
lost PREFLUSH with ext4 on top of ublk after daemon crash recovery.
ub->completion is an edge-triggered latch used as a proxy for the level
condition "every queue has fetched all I/O commands", which can regress
(F_BATCH's UNPREP, daemon death) and whose re-arm can be skipped. Drop
it and wait on the real condition instead: the new helper
ublk_wait_dev_ready_and_lock() waits on ublk_dev_ready() via
wait_var_event_interruptible(), woken from ublk_mark_io_ready(), then
re-checks it under ub->mutex, waiting again on regression, and returns
with the mutex held and readiness guaranteed.
Readiness becomes true in the same ub->mutex critical section that
clears the last queue's ->canceling, so END_USER_RECOVERY marks the
device LIVE and kicks the requeue list strictly after ->canceling
clears. The wait stays interruptible, so a server whose daemon died can
still be signalled out. For ublk_ctrl_start_dev() this replaces the
fail-fast -EINVAL on an F_BATCH ready->UNPREP regression with waiting
until the device is ready again.
Reported-by: George Salisbury <gsalisbury@apnic.net>
Fixes: 728cbac5fe21 ("ublk: move device reset into ublk_ch_release()")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260719134540.120269-1-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One straightforward driver fix for some incorrectly described
bitfields in the ltc3676 driver"
* tag 'regulator-fix-v7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: ltc3676: Fix incorrect IRQSTAT bit offsets
|
|
Jiayuan Chen says:
====================
bpf: Add memory usage for arena and selftest
arena is the only map type whose map_mem_usage() still returns 0, so
bpftool and fdinfo always show 0 memlock for it no matter how many pages
it holds. This series adds the accounting, runs the arena selftests
serially so they don't OOM a small CI VM, and adds a test for it.
v1 -> v2:
- split the scratch_page -> arena refactor into a prep patch (no
functional change)
- use WRITE_ONCE() for nr_pages to pair with the lockless reader
- reword the "run serially" commit message
- selftest: alloc prog returns 0 so the failure check is reached
v1: https://lore.kernel.org/bpf/20260716142746.8794-1-jiayuan.chen@linux.dev/
====================
Link: https://patch.msgid.link/20260717114117.350851-1-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Allocate and free arena pages, both from BPF and via user-space fault-in,
and check that the map's memlock in fdinfo tracks the number of pages that
are actually populated.
Like the other arena tests it runs serially.
test:
./test_progs -a arena_mem_usage
#5 arena_mem_usage:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717114117.350851-5-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Every arena reserves a 4GB kernel vmalloc region at creation, and on a
KASAN build that eagerly populates ~512MB of shadow memory per arena. When
several arena tests run in parallel their shadow adds up, exhausts the
memory of a small CI VM and trips the OOM killer during map creation.
Make the dedicated arena tests (arena_* and libarena*) serial so they no
longer pile up in the parallel phase. That alone brings the peak number of
live arenas back within the CI memory budget.
A few other tests such as verifier_arena*, stream and compute_live_registers
create an arena too, but they run inside shared RUN_TESTS()/RUN() suites, so
turning them serial would drag many unrelated subtests along with them.
Leave those as-is.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717114117.350851-4-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
arena is the only map type whose map_mem_usage() still returns 0, so
"bpftool map show" and fdinfo always showed 0 memlock for an arena no
matter how many pages it had.
Count the pages that are actually mapped into the arena: bump a counter in
apply_range_set_cb() when a page goes in and drop it in
apply_range_clear_cb() when a page goes out, both under the arena spinlock.
map_mem_usage() then just returns nr_pages << PAGE_SHIFT.
Only real data pages are counted, not the scratch page.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717114117.350851-3-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Replace the scratch_page field in the pte-callback data with the arena
pointer; later patches use other arena fields from these callbacks. No
functional change.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260717114117.350851-2-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Reject too long acpi_rsdp= boot parameter values (Thorsten Blum)
- Validate console=uart8250 baud rate to fix early boot hang (Thorsten
Blum)
- Remove dead Makefile rule (Ethan Nelson-Moore)
* tag 'x86-urgent-2026-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Validate console=uart8250 baud rate to fix early boot hang
x86/boot: Reject too long acpi_rsdp= values
x86/cpu: Remove Makefile rule for removed UMC CPU support
|
|
With CONFIG_CC_OPTIMIZE_FOR_SIZE, the address validity check in non-const
`read8` invocaction is not optimized away, leading to build failure.
Fixes: d055768429b3 ("rust: drm: gem: shmem: Add vmap functions")
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260716142545.3622278-2-gary@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add missing return value check in the setup function.
Fixes: d0ddfd241e57 ("hwmon: (asus-ec-sensors) add driver for ASUS EC")
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20260712130602.1256700-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Take INITIAL_JIFFIES into account when setting up next update time.
Fixes: d0ddfd241e57 ("hwmon: (asus-ec-sensors) add driver for ASUS EC")
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20260712110650.1240071-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Do not assume there are only bank 0 and bank 1 available, just use '!='
for bank comparison.
Fixes: d0ddfd241e57 ("hwmon: (asus-ec-sensors) add driver for ASUS EC")
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20260711074217.554656-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
MAX34451 and ADPM chips do not support standard PMBus VIN/IIN limit
registers, manufacturer specific min/max registers, or undercurrent
or undertemperature fault limits. STATUS_BYTE and STATUS_OTHER are also
not available. Accessing these non-existent registers during driver
initialization triggers a CML error and asserts ALERT. Handled by
blocking these functions during read/write.
Fixes: 7a001dbab4ad ("hwmon: (pmbus/max34440) Add support for MAX34451.")
Fixes: 629cf8f6c23a ("hwmon: (pmbus/max34440) Add support for ADPM12160")
Fixes: 2e0b52f1ae88 ("hwmon: (pmbus/max34440): add support adpm12200")
Fixes: 479bfeba2eb6 ("hwmon: (pmbus/max34440): add support adpm12250")
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20260716-max34451_fixes-v1-1-a941b27eaecb@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the device-specific hwmon sensors for select T60xx-based devices
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-12-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add the device-specific hwmon sensors for select T8112-based devices
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-11-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add the device-specific hwmon sensors for select T8103-based devices
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-10-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add the SMC hwmon sensors common to all SoCs
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-9-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add the SMC hwmon sensors common to all SoCs
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-8-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add the SMC hwmon sensors common to all SoCs
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-7-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add the SMC hwmon sensors common to all SoCs
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-6-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Apple's System Management Controller exposes the readings
from numerous sensors scattered around the SoC and elsewhere
in the machine. Some of these sensors are reliably common
on all devices, whereas others are exposed at SMC keys
specific to either the SoC or even the particular device.
To account for this and expose the right sensors for the
right device without tedious Devicetree duplication, we
can include fragments of increasing specificity in the
per-device .dts files such that the individual keys
(of which there are potentially hundreds) do not need to
be copied in for every device.
Add the initial set of SMC hwmon sensors that are common
to multiple devices so that they can be included in
the per-device Devicetrees.
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-5-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add the SMC hwmon subdevice
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-4-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add the SMC hwmon subdevice
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-3-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add the SMC hwmon subdevice
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-2-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add the SMC hwmon subdevice
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260714-smc-subdev-dt-v2-1-13fa78873121@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
We are no longer keeping unreferences glocks around, so remove the
now-obsolete glock lru list and shrinker.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
When we were still caching unreferenced glocks, evicting all the cached inodes
in gfs2_kill_sb() did put the unreferenced glocks onto the glock lru list, and
they would be freed in gfs2_gl_hash_clear(). We could set the
SDF_SKIP_DLM_UNLOCK flag in gfs2_gl_hash_clear() to indicate to gdlm_put_lock()
to skip unlocking glocks explicitly when possible. Now, glocks are demoted and
dropped immediately though, so to allow gdlm_put_lock() to skip unnecessary
unlocking, we need to set some "unmount" flag before calling
gfs2_evict_inodes(). We can use the existing SDF_KILL flag for that if we set
it before calling gfs2_evict_inodes() in gfs2_kill_sb().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Currently, gfs2 caches unreferenced glocks until memory pressure sets in or the
filesystem is unmounted. This was supposedly done to avoid excessive log
flushing: when a glock still has outstanding revokes, freeing it requires an
extra log flush, and we want to avoid too many of those extra log flushes.
Since commit 9287c6452d2b1 ("gfs2: Fix occasional glock use-after-free"),
outstanding revokes are accounted for in the glock reference count and glocks
with outstanding revokes will never be freed anymore, so this is no longer an
issue.
This also means that we won't need a glock LRU list anymore, but we leave
removing that list to a later patch for better readability.
It might seem that glocks that are not referenced anymore can be dropped
immediately without unlocking them first, but that isn't true for inode glocks
that have an address space attached (the "gfs2_glock(aspace)" slab cache): that
address space is only truncated when the associated glock is unlocked. So
unlock those glocks when they become unreferenced.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
All of the examiner functions passed to glock_hash_walk() can deal with glock
hash table resizes and the resulting repeat visiting of glocks, so we can allow
automatic glock hash table shrinking.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Alpha masks interrupts through the PAL IPL state, so lockdep cannot infer
hardirq state transitions from generic code alone. Add explicit
hardirq on/off annotations to the low-level entry and return paths so
lockdep's IRQ state follows the hardware IPL state.
Annotate the PAL IPL transitions and the shared return-to-user/kernel
paths where interrupts become enabled or disabled. With the preceding
irqflags, raw-lock, sysfs, and ftrace return-address preparations in
place, select LOCKDEP_SUPPORT and TRACE_IRQFLAGS_SUPPORT for Alpha.
This keeps CONFIG_PROVE_LOCKING usable on Alpha instead of disabling
debug_locks due to IRQ-state mismatches.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-7-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
|
|
Some Alpha platform locks are used as low-level hardware serialization
locks in interrupt-controller and chipset access paths. These paths can
run while IRQ state is being changed or while lockdep is tracking that
state, so regular spinlock instrumentation is not appropriate once
lockdep is enabled.
Convert the affected Tsunami and Rawhide platform locks to
raw_spinlock_t. This keeps the locks as simple hardware serialization
locks and avoids lockdep recursion or IRQ-state mismatches when
CONFIG_PROVE_LOCKING is enabled.
This is a preparatory change for enabling lockdep hardirq state tracking
on Alpha.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-6-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
|
|
Lockdep uses ftrace_return_address() to report useful call sites for
lock acquisition and IRQ-state tracking diagnostics. Provide the Alpha
architecture hook using the compiler return-address builtin when frame
pointers are available.
Return zero when frame pointers are disabled, matching the existing
fallback behavior of architectures that cannot provide a reliable return
address.
This is a preparatory change for enabling lockdep support on Alpha.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-5-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
|
|
Alpha interrupt masking is controlled by the PAL IPL value, not by the
full processor status word. Make arch_local_save_flags() return the
current IPL directly, and make arch_local_irq_restore() and
arch_irqs_disabled_flags() treat their argument as IPL state.
Mask the low IPL bits in the restore and test helpers so callers which
still pass a saved PS value continue to behave as expected.
This prepares the irqflags helpers for lockdep IRQ-state tracking, where
the saved flags value is used to determine whether hard IRQs are enabled
or disabled.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-4-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
|
|
Implement arch_stack_walk() for Alpha using a simple kernel
stack scanning walker. Start from regs+1 for current tasks
to skip pt_regs and use pcb.ksp for blocked tasks. Filter
candidates with __kernel_text_address() and stop at stack
bounds via kstack_end().
Enable CONFIG_STACKTRACE_SUPPORT and CONFIG_ARCH_STACKWALK
so generic stacktrace users (dump_stack(), /proc/*/stack,
SysRq backtraces, etc.) work on Alpha.
This provides functional in-kernel stack traces without
requiring frame pointer unwinding.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-3-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
|
|
Add a user_regset_view for Alpha and switch ELF core dumping to
CORE_DUMP_USE_REGSET. General-purpose registers are exported in
ELF gregs layout, including callee-saved registers and a correct
user stack pointer.
The user stack pointer is not preserved in pt_regs on Alpha, so expose
it from the PCB, or via rdusp() for the current task, when building the
ELF register image. This makes the user stack pointer consistent for
core dumps, ptrace regsets, and PTRACE_GET_SYSCALL_INFO.
Implement regset get/set callbacks for both NT_PRSTATUS and NT_PRFPREG.
The callbacks translate between Alpha's pt_regs/thread state and the
ELF-visible register layouts, while the common ptrace regset code handles
PTRACE_GETREGSET and PTRACE_SETREGSET iovec semantics. This avoids
duplicating subtle short-buffer and oversized-buffer behavior in
arch_ptrace().
With these changes Alpha satisfies the requirements for
HAVE_ARCH_TRACEHOOK and selects it, enabling generic tracehook and
ptrace syscall-info code paths without changing the existing syscall
entry ABI.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260706170019.2941459-2-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
|
|
The recent switch to 64-bit MSR interfaces introduced a build warning.
Work it around with a __maybe_unused annotation. After the full conversion
of the APIs we'll be able to address this more robustly by making sure
the APIs consume all the values as far the compiler is concerned, so that
the compiler doesn't emit such nuisance warnings.
[ mingo: Updated the changelog. ]
Fixes: cff219368bd0 ("x86/mce: Stop using 32-bit MSR interfaces")
Closes: https://lore.kernel.org/oe-kbuild-all/202607031726.ZOwu4snu-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20260703105555.1758819-1-jgross@suse.com
|
|
Fix a compiler warning about a condition with no effect:
sound/sparc/dbri.c:1843:1-3: WARNING: possible condition with no effect (if == else)
When DBRI_DEBUG is not defined, dprintk expands to an empty do-while
statement, making both branches of the if-else no-ops. Guard the entire
debug block with #ifdef DBRI_DEBUG to eliminate the warning and keep
the rval reference consistent with its declaration scope.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260717091542.721877-3-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix checksum lib on machines without the vector facility where the
non-vector fallback made csum_partial() calculate the checksum from
address 0 instead of the provided buffer
- Fix cpum_cf perf event initialization missing speculation barrier for
user controlled event numbers used as generic event array indexes
* tag 's390-7.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init()
s390/checksum: Fix csum_partial() without vector facility
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Misc fixes and config updates
* tag 'arc-7.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: configs: Drop redundant I2C_DESIGNWARE_PLATFORM
arc: validate DT CPU map strings before parsing them
|
|
Use dev_err_probe() instead of dev_err() to simplify the error path
and cleanly handle deferred probing.
Signed-off-by: Vojtěch Krátký <vo.kratky@seznam.cz>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
The GCC GDSCs on Glymur are backed by the RPMh CX power domain. Without
describing that parent domain, consumers of GCC-provided GDSCs can enable
their local domain without causing the required CX vote to be held.
Add the CX power-domain reference to the GCC node so votes from GCC GDSC
consumers can propagate to RPMh CX.
Fixes: 41b6e8db400c ("arm64: dts: qcom: Introduce Glymur base dtsi")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260715-glymur-fix-gcc-cx-scaling-v3-3-72eb5adad156@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SHM bridge creation is required to enable memory protection for both
remoteproc metadata and its memory region on Qualcomm SoCs like Glymur
running non-Gunyah based Hypervisors, unlike Kaanapali.
Having Glymur fall back to the Kaanapali binding is therefore incorrect
and breaks subsystem restart on Glymur.
Fix this by decoupling Glymur SoCCP PAS from Kaanapali and registering
it as its own binding.
Fixes: 8b54bacadc0c ("dt-bindings: remoteproc: qcom: Document pas for SoCCP on Kaanapali and Glymur platforms")
Signed-off-by: Ananthu C V <ananthu.cv@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260709-glymur-soccp-v6-1-16f70227547d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Fix misspelling of 'reference' (was 'referance') in the
vrefp-supply and vrefn-supply descriptions.
Signed-off-by: Yahya Toubali <yahya@yahyatoubali.me>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
According to user manual / programming guide there is no separate PCIe
phy 3A and 3B, but one 8-lane QMP PCIe Gen5 PHY which consists of two
4-lane blocks. This is also visible in memory map, where the 0xf00000
is marked as the main block with additional sub blocks for each 4-lane
phys.
Describing the sub phys without the rest is not correct from hardware
description, even if it works.
Link: https://lore.kernel.org/r/20260420-optimistic-unnatural-stingray-80da35@quoll/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260609141608.354186-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Glymur has a True Random Number Generator, add the node with the correct
compatible set.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Tested-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260424-glymur_trng_enablement-v2-2-0603cbe68440@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The qcom_cc_driver_data and critical CBCRs list are never modified by
common code and are expected to be const. Hence add const qualifier for
these fields.
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260714-glymur_camcc_const_fixes-v1-1-c635123ebbeb@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Embedded Trace Router(ETR) is working as a DDR memory sink to collect
tracing data from source device and the CTCU device serves as the
control unit for the ETR device.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260714-add-ctcu-etr-for-glymur-v1-1-791de63c0713@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
