| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous union.
While touching these arrays unify spacing and usage of commas.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/a76e26aa4edb901b4bea684919463b2243dd8d9d.1784528081.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- Add a trailing comma for initializers unless the closing brace is on
the same line and for the list terminator;
- Use a single space in the list terminator;
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/08137cf5b3cdd0cc2e00da32256664f3cb9b1e4e.1784528081.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous union.
While touching these arrays unify spacing and usage of commas.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/a23fa9f649eaab706c704b671527c238f211ee26.1784528081.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit 38d3273075d6 ("ASoC: renesas: fsi: remove platform data
style support") probing using the traditional platform bus matching
isn't supported any more.
Drop the platform_device_id entries that should have been removed in the
above commit. Note that keeping the empty array results in the driver
not matching on "fsi-pcm-audio" (i.e. the driver name).
While touching that array, use a single space and no trailing comma for
the list terminator, which is the most used style for this.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/c79fa0d31abc0c80fbd7b4ec94d95b197ddb9f94.1784528081.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver explicitly sets the .driver_data member of struct
platform_device_id to zero without relying on that value. Drop this
unused assignment.
While touching this array unify spacing, use a named initializer for
.name and drop a trailing comma after the list terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/724af6f60ed9420d5513724d126d70f22e319c91.1784528081.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Airoha AN7583 Thermal driver. This apply similar logic
on how to read the temperature but totally drop support for the
PTP_THERMAL subsystem. PTP_THERMAL subsystem was a way to trigger trip
point from hardware by configuring how to read the temperature
internally.
This subsystem has been totally removed from Airoha AN7583 permitting
only to read the temperature.
The SoC support up to 3 sensor but the original driver always read the
BGA sensor hence it's currently implemented reading only this specific
sensor. Reference and values for the other 2 sensor are defined for
further implementation if confirmed working.
set_thermal_mux() is extended to also address muxing the sensor as
AN7583 use a different way to read the temperature from 3 different
diode. The EN7581 code is updated to account for these changes.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260702094846.17325-8-ansuelsmth@gmail.com
|
|
Document support for Airoha AN7583 chip-scu node.
This is similar to Airoha EN7581 with the addition of the presence of
thermal sensor in addition to controlling HW PIN and other miscellaneous
pheriperals.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260702094846.17325-7-ansuelsmth@gmail.com
|
|
In preparation for support of Airoha AN7583, generalize
get_thermal_ADC() and set_thermal_mux() with the use of reg_field API.
This is to take into account the same logic between the current
supported SoC and the new one but with different register address.
While at it also further improve some comments and move sleep inside the
set_thermal_mux function.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260702094846.17325-6-ansuelsmth@gmail.com
|
|
In preparation for support of Airoha AN7583, generalize the probe
function to address for the 2 SoC difference.
Implement a match_data struct where it's possible to define a more
specific probe and post_probe function and specific thermal ops and
pllrg protect value.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260702094846.17325-5-ansuelsmth@gmail.com
|
|
In preparation for support of Airoha AN7583, convert the driver to
regmap API. This is needed as Airoha AN7583 will be based on syscon
regmap.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260702094846.17325-4-ansuelsmth@gmail.com
|
|
In airoha_thermal_setup_monitor there is a copy paste error on configuring
the internval for temp monitor. Fix the error and use the correct mask for
the sen interval for the EN7581_TEMPMONCTL2 register.
Fixes: 42de37f40e1b ("thermal/drivers: Add support for Airoha EN7581 thermal sensor")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Wayen Yan <win847@gmail.com>
Link: https://patch.msgid.link/20260702094846.17325-3-ansuelsmth@gmail.com
|
|
In airoha_thermal_set_trips, there is a copy paste error on clamping the
value for the low trip temp point. Fix it to the correct value and actually
clamp for the low variable.
Fixes: 42de37f40e1b ("thermal/drivers: Add support for Airoha EN7581 thermal sensor")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Wayen Yan <win847@gmail.com>
Link: https://patch.msgid.link/20260702094846.17325-2-ansuelsmth@gmail.com
|
|
The HP Dragonfly Folio G3 2-in-1 also ships with PCI SSID 103c:8a05.
On this unit the ALC245 codec reports subsystem id 103c:8a06 - the SSID
that is already covered by commit 0a10faad5ca5 ("ALSA: hda/realtek: add
quirk for HP Dragonfly Folio G3 2-in-1") - while the PCI SSID that
SND_PCI_QUIRK matches against is 103c:8a05:
snd_hda_codec_alc269 ehdaudio0D0: ALC245: picked fixup for PCI SSID 103c:8a05
cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: CS35L41 Bound - SSID: 103C8A06
The existing entry therefore never applies here, the four CS35L41
amplifiers on SPI are not registered and the internal speakers stay
silent.
Add the same fixup that the 8a06 entry uses: the four amplifiers bind
and the speaker mute LED (codec GPIO 0x04) works.
Signed-off-by: Michael Diesen <michael.diesen@posteo.de>
Link: https://patch.msgid.link/20260727091920.4634-1-michael.diesen@posteo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Lenovo Legion 7 15ASH11 with AMD RYZEN AI MAX+ 392 (Strix Halo, ACP
7.0) uses Realtek ALC287 series codec. Its audio subsystem adopts a
hardware design similar to that of the Yoga Pro 7 15ASH11.
It shares PCI SSID 17aa:38f9 with Thinkbook 16P Gen5.
Therefore, use HDA_CODEC_QUIRK to apply ALC287_FIXUP_LENOVO_YOGA_PRO7
for identification.
After added the HDA_CODEC_QUIRK quirk special for Lenovo Legion 7
15ASH11, the mic mute LED works well.
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Link: https://patch.msgid.link/20260727080048.13254-1-xy-jackie@139.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Add AW88399 HDA side codec driver for Lenovo Legion
In order to support AW88399 HDA side codec used on the Lenovo Legion we
need updates to it's ASoC driver.
|
|
Valerio Setti <vsetti@baylibre.com> says:
This is a follow-up to the recently merged series reshaping the AIU
driver following the same design as AXG [1]. During the review,
Jerome pointed out that failing in hw_params() when two streams have
incompatible requirements is too late from userspace's point of view [2].
This series addresses that comment:
- Patch 1 fixes the existing bclk quirk check first: it only rejected
one direction of the mismatch, and its interface-wide flag was
cleared too late, making a legal reconfiguration of a single stream
fail. This is a standalone fix and it's preparing for patch 2.
- Patch 2 is the actual answer to the review comment: the quirk
incompatibility is expressed as hw rules on channels and sample
bits, refined against the committed configuration of the opposite
stream, so it becomes visible during parameter refinement. The
hw_params() check is kept as the last backstop in case of concurrent
refinement.
- Patch 3 applies the same philosophy to the interface-wide rate
symmetry. Instead of manually reimplementing the check, take advantage of
the core's 'symmetric_rate' handling.
Jerome's comment also mentioned the error returned when 'bs' is not a
multiple of 2. That one intentionally remains a hw_params() time
error: bs depends on the mclk rate, which the DAI only learns via
set_sysclk() from the machine driver's hw_params(), after parameter
refinement has already run. I don't think that can easily be expressed as
a constraint.
Final note. [1] has not been mainlined yet and it's only present in
'broonie/sound.git#for-7.3'. Therefore this series depends on commit
c7852d2dcf66 ("ASoC: meson: aiu: align I2S design to the AXG one").
[1] https://lore.kernel.org/linux-sound/20260610-reshape-aiu-as-axg-v2-0-cac3663a8b51@baylibre.com/
[2] https://lore.kernel.org/linux-sound/1jik7pebk7.fsf@starbuckisacylon.baylibre.com/
Link: https://patch.msgid.link/20260710-aiu-improve-quirk-check-v1-0-2fdd1b6f8896@baylibre.com
|
|
The driver manually implement the interface-wide rate symmetry enforcement
in hw_params(), which suffers from the same problem addressed in the
previous patch: the restriction is not visible in the hw parameter
constraints, so a stream with a mismatching rate only finds out via
-EINVAL late in the stream setup.
The ASoC core already provides this feature through the DAI's
'symmetric_rate' flag: when another stream of the DAI is active,
soc_pcm_apply_symmetry() constrains the rate at open time so the
restriction shows up during parameter refinement, and
soc_pcm_params_symmetry() still rejects a mismatch at hw_params()
time as a backstop.
Set 'symmetric_rate' on the I2S encoder DAI and drop the open-coded
check along with the now unused 'rate' member of struct gx_iface.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Link: https://patch.msgid.link/20260710-aiu-improve-quirk-check-v1-3-2fdd1b6f8896@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the only check for bs-quirk is implemented in hw_params(), but
this is too late: nothing in the refined hw parameters hints at the
restriction, so userspace has no way to know the configuration is
invalid until the setup fails, as Jerome pointed out during review [1].
Add hw rules on CHANNELS and SAMPLE_BITS at startup() so that the
restriction shows up during parameter refinement instead. The rules
are refined against the committed configuration of the opposite
stream:
- if it uses the quirk, the current stream is narrowed to the same
8ch/16-bit configuration;
- otherwise, selecting a 16-bit physical width limits the stream to
2 channels, and selecting 8 channels requires a physical width
larger than 16 bits.
The rules key on the physical width while the quirk is defined on the
significant bits. This is safe because S16_LE is the only format
supported by the encoder where both are 16 bits.
The check in aiu_encoder_i2s_set_clocks() is kept as the last backstop:
both streams may be refined concurrently before either commits its
configuration.
The rules are only registered on GX platforms where the bs-quirk exists
and only when the DAI has a stream in the opposite direction.
[1] https://lore.kernel.org/r/1jik7pebk7.fsf@starbuckisacylon.baylibre.com/
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Link: https://lore.kernel.org/r/1jik7pebk7.fsf@starbuckisacylon.baylibre.com/
Link: https://patch.msgid.link/20260710-aiu-improve-quirk-check-v1-2-2fdd1b6f8896@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The bs-quirk incompatibility check has two flaws:
- It only rejects one direction of the mismatch. A stream that does
not require the quirk is rejected while a quirked stream is active,
but the opposite is not true: a stream requiring the quirk passes
the check while a non-quirked stream is active, silently
reprogramming the shared mclk/bclk divider with the 50% increase
and corrupting the output of the running stream.
- 'bs_quirk' is only cleared in hw_free() when the last substream
closes, but userspace may legally stop/reconfigure/start the stream
without an intervening hw_free. Reconfiguring a single stream
from the quirked configuration (8ch/16-bit) to one that does not
need the quirk therefore fails with -EINVAL due to the stale flag.
Drop the interface-wide flag and instead compare the quirk
requirement of the incoming parameters against the committed
configuration of the opposite stream at hw_params() time. The
committed channels/width are cleared in hw_free() so that a released
stream no longer constrains the other one.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Link: https://patch.msgid.link/20260710-aiu-improve-quirk-check-v1-1-2fdd1b6f8896@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator and drop trailing commas there.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Douglas Anderson <dianders@chromium.org> # ti-sn65dsi86.c
Link: https://patch.msgid.link/9fa3a8e372b7211c06ec885617051f5006227e3a.1784545092.git.u.kleine-koenig@baylibre.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
MIN_PERF and MAX_PERF are optional CPPC controls. DESIRED_PERF is also
optional with CPPC2 when autonomous selection is supported.
The cppc-cpufreq target callbacks populate both limits for every request
without checking whether the controls are implemented. cppc_set_perf()
consequently passes NULL register descriptors to cpc_write(). The writes
fail width validation and their return values are ignored, so the failed
access paths are repeated on every target request. An autonomous-only
platform can take the same path for DESIRED_PERF.
Check that each performance control is supported before calling
cpc_write().
Fixes: ea3db45ae476 ("cpufreq: cppc: Update MIN_PERF/MAX_PERF in target callbacks")
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260724104042.1481804-1-christian.loehle@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The platform firmware on some platforms sets OSC_CAPABILITIES_MASK_ERROR
in _OSC error bits even though it actually acknowledges all of the
requested features which after commit e5322888e6bf ("ACPI: bus: Rework
the handling of \_SB._OSC platform features") causes the kernel to
complain unnecessarily.
Avoid the confusing complaints by explicitly checking for that case
in acpi_osc_handshake().
Fixes: e5322888e6bf ("ACPI: bus: Rework the handling of \_SB._OSC platform features")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Saverio Miroddi <saverio.pub2@gmail.com>
[ rjw: Fixed a typo in the new comment ]
Link: https://patch.msgid.link/6315683.lOV4Wx5bFT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Sang-Heon Jeon <ekffu200098@gmail.com> says:
This series removes conditional returns where both branches return
the same value, so the check has no effect. As suggested by Vijendar,
the ASoC patch of the treewide v1 series [1] is split per vendor and
posted separately.
All patches are generated by the Coccinelle script, which you can
find in v1.
If you would rather drop any of the patches, just let me know and I will address
it in the next version.
Link: https://patch.msgid.link/20260725160344.916838-1-ekffu200098@gmail.com
|
|
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260725160344.916838-5-ekffu200098@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260725160344.916838-4-ekffu200098@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260725160344.916838-3-ekffu200098@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260725160344.916838-2-ekffu200098@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pch_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
This was confirmed on a PREEMPT_RT kernel with lockdep
(PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored
pch_irq_type()'s locking and drove it through the real genirq carrier
irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e.
the same __irq_set_trigger() edge that __setup_irq() takes for a
requested IRQ. With the original spin_lock_irqsave() edge lockdep
reported an invalid wait context, immediately followed by:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod
hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60
rt_spin_lock+0x3a/0x1c0
repro_irq_set_type+0x64/0xa0 [pch_repro]
__irq_set_trigger+0x69/0x140
irq_set_irq_type+0x78/0xd0
Switching the mirrored lock to raw_spinlock_t made both splats go away.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, but all of those critical sections only perform
MMIO register accesses (ioread32()/iowrite32()) and
irq_set_handler_locked(); none of them contain sleepable operations.
Keeping this register lock non-sleeping is therefore appropriate for the
irqchip callbacks and does not change the GPIO-side locking contract.
This is the same class of issue and fix as recently addressed for other
GPIO controllers, e.g. commit 286533cb14a3 ("gpio: sch: use raw_spinlock_t
in the irq startup path") and commit 90f0109019e6 ("gpio: eic-sprd: use
raw_spinlock_t in the irq startup path").
Fixes: 38eb18a6f92d ("gpio-pch: Support interrupt function")
Cc: stable@vger.kernel.org
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260723014129.1129730-1-junjie.cao@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The qcom_battmgr_sc8280xp_strcpy() takes a Pascal-style string when the
firmware sends one. Otherwise it copies all BATTMGR_STRING_LEN bytes and
leaves the destination without a terminator.
Those destinations are model_number, serial_number and oem_info, each
BATTMGR_STRING_LEN and declared next to each other. They go out to user
space as val->strval, which power_supply_format_property() prints with
"%s", so a firmware string that fills the whole field makes that read run
into the following members.
Use strscpy() so the copy always terminates, the way the SM8350 path
already does for the same field.
Fixes: 29e8142b5623 ("power: supply: Introduce Qualcomm PMIC GLINK power supply")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260727074119.2585463-1-sammiee5311@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
When pca953x_restore_context() fails, cache_only is left disabled and
the IRQ left enabled, even though register synchronization may not have
completed successfully. Restore cache_only and disable the IRQ again on
failure, matching the state set by pca953x_save_context().
Fixes: ec5bde62019b ("gpio: pca953x: Split pca953x_restore_context() and pca953x_save_context()")
Fixes: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260727080205.16353-1-phucduc.bui@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
If the probe function returns an error after getting the I2C adapter for
DDC, the reference to the adapter is never released. Fix it by releasing
it in the bridge .destroy() handler.
There is no need to test the ddc pointer with !IS_ERR(), as
of_get_i2c_adapter_by_node() returns NULL on error.
Fixes: 2e2bf3a5584d ("drm/bridge: display-connector: add DP support")
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260717184836.2017386-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
max17040_get_vcell() and max17040_get_soc() ignore errors returned by
regmap_read(). When an I2C transfer fails, the uninitialized register
value is converted and reported to userspace as a valid voltage or state
of charge. The polling worker can also replace the cached state of charge
with the bogus value and emit a spurious change event.
Propagate read errors through the power supply get_property callback and
keep the last valid cached state of charge when polling fails.
Fixes: c6f4a42de60b ("Add MAX17040 Fuel Gauge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jianing Li <m13940358460@163.com>
Link: https://patch.msgid.link/20260727064825.948-1-m13940358460@163.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260723184538.3888637-29-ekffu200098@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260723184538.3888637-15-ekffu200098@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need the char/misc fixes AND this resolves two merge conflicts in:
drivers/android/binder/thread.rs
drivers/misc/nsm.c
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert eukrea-tlv320.txt to yaml format.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260515145205.1696584-1-Frank.Li@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
exfat_move_file() removes the old directory entry before the new entry
has been written. If writing the new entry fails, rename returns an
error after the source entry has already been marked deleted.
Write the new entry first, then remove the old entry and update the
cached inode location. This keeps the source entry intact if creating
the destination entry fails.
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Make sure to drop the i2c adapter device and module references before
returning when detecting a malformed devicetree during probe.
Fixes: 80e2f97968b5 ("drm: bridge: dw-hdmi: Switch to regmap for register access")
Cc: stable@vger.kernel.org # 4.12
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260717090819.1630965-1-johan@kernel.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
When using MMIO with regmap, fast_io is implied. No need to set it
again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260705164311.2273-2-wsa+renesas@sang-engineering.com
|
|
The HP OMEN 16-wd0xxx (board ID: 8BA9) has the same WMI interface
as other Victus S boards, but requires quirks for correctly
switching thermal profile.
Add the DMI board name to hp_wmi_feature_boards[] table
and map it to omen_v1_board_params.
Without this entry, platform profile switching is unavailable,
preventing fan RPM reporting and controlling.
Tested on:
HP OMEN 16-wd0012TX
DMI Board Name: 8BA9
It has been confirmed that the platform profile is registered
successfully, and the fan RPMs are readable and controllable.
Signed-off-by: Suryansh Singh <technosfan14@gmail.com>
Link: https://patch.msgid.link/20260724120255.49649-1-technosfan14@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Don't populate the read-only const array supply_names on the stack
at run time, instead make it static
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260714190400.194605-1-colin.i.king@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
There can only exist a single instance of the dell-smbios-wmi driver
at the same time because of naming conflicts with the character
device ("wmi/dell-smbios"). Having a global list for all instances
thus makes no sense.
Replace the global list with a single item used by the character
device. This simplifies the driver and allows us to mark it as
being multi-instance safe.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260720131921.368000-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The WMI SMBIOS backend needs to access the its driver state container
when performing SMBIOS calls. Pass the device associated with a given
backend to the callback function to allow the WMI backend to retrieve
said state container in a more straightforward manner.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260720131921.368000-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When unbinding the WMI driver while a userspace application has
an open file descriptor for the character device, a UAF occurs:
KASAN: slab-use-after-free in _copy_to_user from platform/x86/dell-smbios-wmi
The reason for this is that even after calling misc_deregister(),
userspace appications can still call read() and/or ioctl() on open
file descriptors associated with the already unregistered character
device. This causes a UAF by attempting to access the already freed
state container of the WMI driver.
Fix this by no longer storing the state container inside
filp->private_data. Instead retrieve the state container using
get_first_smbios_priv() and return -ENODEV if the state container
does not exist anymore.
Reported-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/178144969601.60470.13396800403157907003@gmail.com/
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260720131921.368000-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
STB (Spill to DRAM) is an optional debugging facility that is only enabled
through the enable_stb module parameter. On some platforms the SMU refuses
the S2D setup outright, and on long-running systems the large telemetry
region can fail to ioremap. In either case amd_stb_s2d_init() returns an
error and, because probe treated that as fatal, the entire PMC driver
failed to load - silently disabling s0i3 support even though STB is only a
debug aid.
Downgrade the failure to a warning and continue probing so that s0i3
support via the LPS0 handler no longer depends on an optional debug
feature.
Since probe no longer aborts on this path, the LPS0 and debugfs unwinding
added by the earlier fix in this series becomes unreachable and is removed.
Reported-by: Francis De Brabandere <francisdb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221759
Tested-by: Francis De Brabandere <francisdb@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-7-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
amd_pmc_probe() registers the LPS0 s2idle handler with
acpi_register_lps0_dev() and creates the driver's debugfs directory before
calling amd_stb_s2d_init(), which is the last step in probe that can fail.
When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot
be ioremapped on a long-running system, or the SMU rejects the S2D setup)
the error path only calls pci_dev_put() and returns. This leaves
amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks
the debugfs directory, while the devm-managed resources backing the handler
are torn down.
Reloading the module then walks the corrupted list in
acpi_register_lps0_dev() and hits:
list_add corruption. next->prev should be prev, but was NULL.
kernel BUG at lib/list_debug.c:29!
acpi_register_lps0_dev+0x44/0x80
amd_pmc_probe+0x224/0x380 [amd_pmc]
platform_probe+0x67/0x90
Even without a reload, the stale registration means the next s2idle
transition calls into torn-down driver state.
Unwind the debugfs directory and the LPS0 registration on the
amd_stb_s2d_init() error path. acpi_unregister_lps0_dev() is safe to call
unconditionally here: it is guarded on the same conditions as
acpi_register_lps0_dev(), which is exactly what amd_pmc_remove() already
relies on.
Reported-by: Francis De Brabandere <francisdb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221759
Tested-by: Francis De Brabandere <francisdb@gmail.com>
Fixes: 83ad6974dd3b ("platform/x86/amd/pmc: Move STB block into amd_pmc_s2d_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-6-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
amd_stb_s2d_init() creates the v2 "stb_read" debugfs node before mapping
the telemetry buffer into dev->stb_virt_addr, leaving a window during probe
where a read faults on a NULL dev->stb_virt_addr in
amd_stb_debugfs_open_v2()/amd_stb_handle_efr().
This becomes trivial to hit once a failed STB init no longer aborts probe
(next patch), which leaves the node registered with a NULL buffer. Create
it only after dev->stb_virt_addr is mapped.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-5-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
amd_stb_s2d_init() discards the return value of several S2D SMU commands.
When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the
failure is only noticed indirectly - if at all - and reported as -EIO,
masking the real error.
More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so
on failure phys_addr_low/hi are left uninitialised and the assembled
address is passed straight to devm_ioremap(). When the SMU leaves them at
zero this maps physical address 0 and trips the ioremap-on-RAM warning:
amd_pmc AMDI000B:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 13 PID: 4592 at arch/x86/mm/ioremap.c:...
Check the return value of each SMU command and propagate it, and reject a
zero physical address before calling devm_ioremap().
Reported-by: Francis De Brabandere <francisdb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221759
Tested-by: Francis De Brabandere <francisdb@gmail.com>
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-4-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
amd_stb_debugfs_open_v2() switches dev->msg_port to MSG_PORT_S2D to query
S2D telemetry but only restores it to MSG_PORT_PMC on one path. The early
return on the dump_custom_stb path (and the error/allocation returns) leave
the port stuck on MSG_PORT_S2D, so subsequent SMU communication - including
the s2idle prepare/restore handlers - is directed at the wrong mailbox.
Consolidate the exit path through a single label so the message port is
always restored, mirroring the fix in amd_stb_s2d_init().
Reported-by: sashiko.dev
Link: https://sashiko.dev/#/patchset/20260717162023.956346-1-mario.limonciello%40amd.com
Fixes: 2851f4f8ed4e ("platform/x86/amd/pmc: Define enum for S2D/PMC msg_port and add helper function")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-3-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
dev->msg_port is switched to MSG_PORT_S2D before issuing the S2D SMU
commands but is only restored to MSG_PORT_PMC on the success path. The
early "return -EIO" and "return -ENOMEM" leave the port stuck on
MSG_PORT_S2D, so all subsequent SMU communication - including the s2idle
prepare/restore handlers - is directed at the wrong mailbox.
Consolidate the exit path through a single label so the message port is
always restored.
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260721181756.143084-2-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
