| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git checkout -b branch/with/multi/level/name && git stash" only
recorded the last level component of the branch name, which has
been corrected.
* gc/stash-on-branch-with-multi-level-name:
stash: strip "refs/heads/" with skip_prefix
|
|
The error message given by "git switch HEAD~4" has been clarified
to suggest the "--detach" option that is required.
* ah/advice-switch-requires-detach-to-detach:
switch: mention the --detach option when dying due to lack of a branch
|
|
When "index-pack" dies due to incoming data exceeding the maximum
allowed input size, include the value of the limit in the error
message.
* mc/index-pack-report-max-size:
index-pack: clarify the breached limit
|
|
Usage-string normalization.
* ac/usage-string-fixups:
amend remaining usage strings according to style guide
|
|
Random test-framework clean-up.
* ab/test-leak-diag:
test-lib: add "fast_unwind_on_malloc=0" to LSAN_OPTIONS
test-lib: make $GIT_BUILD_DIR an absolute path
test-lib: correct and assert TEST_DIRECTORY overriding
test-lib: add GIT_SAN_OPTIONS, inherit [AL]SAN_OPTIONS
|
|
Test modernization.
* ab/hook-tests:
hook tests: use a modern style for "pre-push" tests
hook tests: test for exact "pre-push" hook input
|
|
A not-so-common mistake is to write a script to feed "git bisect
run" without making it executable, in which case all tests will
exit with 126 or 127 error codes, even on revisions that are marked
as good. Try to recognize this situation and stop iteration early.
* rs/bisect-executable-not-found:
bisect--helper: double-check run command on exit code 126 and 127
bisect: document run behavior with exit codes 126 and 127
bisect--helper: release strbuf and strvec on run error
bisect--helper: report actual bisect_state() argument on error
|
|
Further polishing of "git sparse-checkout".
* en/sparse-checkout-fixes:
sparse-checkout: reject arguments in cone-mode that look like patterns
sparse-checkout: error or warn when given individual files
sparse-checkout: pay attention to prefix for {set, add}
sparse-checkout: correctly set non-cone mode when expected
sparse-checkout: correct reapply's handling of options
|
|
Test modernization.
* cg/t3903-modernize:
tests: make the code more readable
tests: allow testing if a path is truly a file or a directory
t/t3903-stash.sh: replace test [-d|-f] with test_path_is_*
|
|
Test the "--filter" option to make sure we don't break anything while
refactoring "git submodule update".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Amend some submodule tests to test for the failure output of "git
submodule [update|init]". The lack of such tests hid a regression in
an earlier version of a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In glibc >= 2.34 MALLOC_CHECK_ and MALLOC_PERTURB_ environment
variables have been replaced by GLIBC_TUNABLES. Also the new
glibc requires that you preload a library called libc_malloc_debug.so
to get these features.
Using the ordinary glibc system variable detect if this is glibc >= 2.34 and
use GLIBC_TUNABLES and the new library.
This patch was inspired by a Richard W.M. Jones ndbkit patch
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The gpg-agent is one of several processes that newer releases of GnuPG
start automatically. Issue a kill to each of them to ensure they do not
affect separate tests. (Yes, the separate GNUPGHOME should do that
already. If we find that is case, we could drop the --kill entirely.)
In terms of compatibility, the 'all' keyword was added to the --kill &
--reload options in GnuPG 2.1.18. Debian and RHEL are often used as
indicators of how a change might affect older systems we often try to
support.
- Debian Strech (old old stable), which has limited security support
until June 2022, has GnuPG 2.1.18 (or 2.2.x in backports).
- CentOS/RHEL 7, which is supported until June 2024, has GnuPG
2.0.22, which lacks the --kill option, so the change won't have
any impact.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With gpgsm from gnupg-2.3, the changes to the trustlist.txt do not
appear to be picked up without refreshing the gpg-agent. Use the 'all'
keyword to reload all of the gpg components. The scdaemon is started as
a child of gpg-agent, for example.
We used to have a --kill at this spot, but I removed it in 2e285e7803
(t/lib-gpg: drop redundant killing of gpg-agent, 2019-02-07). It seems
like it might be necessary (again) for 2.3.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Checking if signing was successful will now accept '[GNUPG]:
SIG_CREATED' on the beginning of the first or any subsequent line. Not
just explictly the second one anymore.
Gpgsm v2.3 changed its output when listing keys from `fingerprint` to
`sha1/2 fpr`. This leads to the gpgsm tests silently not being executed
because of a failed prerequisite.
Switch to gpg's `--with-colons` output format when evaluating test
prerequisites to make parsing more robust. This also allows us to
combine the existing grep/cut/tr/echo pipe for writing the trustlist.txt
into a single awk expression.
Adjust error message checking in test for v2.3 specific output changes.
Helped-By: Junio C Hamano <gitster@pobox.com>
Helped-By: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a regression in ff37a60c369 (log tests: check if grep_config() is
called by "log"-like cmds, 2022-02-16), a "test_done" command used
during development made it into a submitted patch causing tests 41-136
in t/t4202-log.sh to be skipped.
Reported-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When renaming a remote, Git needs to rename all remote tracking
references to the remote's new name (e.g., renaming
"refs/remotes/old/foo" to "refs/remotes/new/foo" when renaming a remote
from "old" to "new").
This can be somewhat slow when there are many references to rename,
since each rename is done in a separate call to rename_ref() as opposed
to grouping all renames together into the same transaction. It would be
nice to execute all renames as a single transaction, but there is a
snag: the reference transaction backend doesn't support renames during a
transaction (only individually, via rename_ref()).
The reasons there are described in more detail in [1], but the main
problem is that in order to preserve the existing reflog, it must be
moved while holding both locks (i.e., on "oldname" and "newname"), and
the ref transaction code doesn't support inserting arbitrary actions
into the middle of a transaction like that.
As an aside, adding support for this to the ref transaction code is
less straightforward than inserting both a ref_update() and ref_delete()
call into the same transaction. rename_ref()'s special handling to
detect D/F conflicts would need to be rewritten for the transaction code
if we wanted to proactively catch D/F conflicts when renaming a
reference during a transaction. The reftable backend could support this
much more readily because of its lack of D/F conflicts.
Instead of a more complex modification to the ref transaction code,
display a progress meter when running verbosely in order to convince the
user that Git is doing work while renaming a remote.
This is mostly done as-expected, with the minor caveat that we
intentionally count symrefs renames twice, since renaming a symref takes
place over two separate calls (one to delete the old one, and another to
create the new one).
[1]: https://lore.kernel.org/git/572367B4.4050207@alum.mit.edu/
Suggested-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the testcase to exercise backfilling of tags for fetches we evoke a
failure of the backfilling mechanism by creating a reference that later
on causes a D/F conflict. Because the assumption was that git-fetch(1)
would notice the D/F conflict early on this conflicting reference was
created via the reference-transaction hook just when we were about to
write the backfilled tag. As it turns out though this is not the case,
and the fetch fails in the same way when we create the conflicting ref
up front.
Simplify the test setup creating the reference up front, which allows us
to get rid of the hook script.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have various behavior that's shared across our Makefiles, or that
really should be (e.g. via defined templates). Let's create a
top-level "shared.mak" to house those sorts of things, and start by
adding the ".DELETE_ON_ERROR" flag to it.
See my own 7b76d6bf221 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) and db10fc6c09f (doc: simplify Makefile using
.DELETE_ON_ERROR, 2021-05-21) for the addition and use of the
".DELETE_ON_ERROR" flag.
I.e. this changes the behavior of existing rules in the altered
Makefiles (except "Makefile" & "Documentation/Makefile"). I'm
confident that this is safe having read the relevant rules in those
Makfiles, and as the GNU make manual notes that it isn't the default
behavior is out of an abundance of backwards compatibility
caution. From edition 0.75 of its manual, covering GNU make 4.3:
[Enabling '.DELETE_ON_ERROR' is] almost always what you want
'make' to do, but it is not historical practice; so for
compatibility, you must explicitly request it.
This doesn't introduce a bug by e.g. having this
".DELETE_ON_ERROR" flag only apply to this new shared.mak, Makefiles
have no such scoping semantics.
It does increase the danger that any Makefile without an explicit "The
default target of this Makefile is..." snippet to define the default
target as "all" could have its default rule changed if our new
shared.mak ever defines a "real" rule. In subsequent commits we'll be
careful not to do that, and such breakage would be obvious e.g. in the
case of "make -C t".
We might want to make that less fragile still (e.g. by using
".DEFAULT_GOAL" as noted in the preceding commit), but for now let's
simply include "shared.mak" without adding that boilerplate to all the
Makefiles that don't have it already. Most of those are already
exposed to that potential caveat e.g. due to including "config.mak*".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is missing test coverage to ensure that the resulting reflogs
after a git stash drop has had its old oid rewritten if applicable, and
if the refs/stash has been updated if applicable.
Add two tests that verify both of these happen.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typically with sparse checkouts, we expect files outside the sparsity
patterns to be marked as SKIP_WORKTREE and be missing from the working
tree. Sometimes this expectation would be violated however; including
in cases such as:
* users grabbing files from elsewhere and writing them to the worktree
(perhaps by editing a cached copy in an editor, copying/renaming, or
even untarring)
* various git commands having incomplete or no support for the
SKIP_WORKTREE bit[1,2]
* users attempting to "abort" a sparse-checkout operation with a
not-so-early Ctrl+C (updating $GIT_DIR/info/sparse-checkout and the
working tree is not atomic)[3].
When the SKIP_WORKTREE bit in the index did not reflect the presence of
the file in the working tree, it traditionally caused confusion and was
difficult to detect and recover from. So, in a sparse checkout, since
af6a51875a (repo_read_index: clear SKIP_WORKTREE bit from files present
in worktree, 2022-01-14), Git automatically clears the SKIP_WORKTREE
bit at index read time for entries corresponding to files that are
present in the working tree.
There is another workflow, however, where it is expected that paths
outside the sparsity patterns appear to exist in the working tree and
that they do not lose the SKIP_WORKTREE bit, at least until they get
modified. A Git-aware virtual file system[4] takes advantage of its
position as a file system driver to expose all files in the working
tree, fetch them on demand using partial clone on access, and tell Git
to pay attention to them on demand by updating the sparse checkout
pattern on writes. This means that commands like "git status" only have
to examine files that have potentially been modified, whereas commands
like "ls" are able to show the entire codebase without requiring manual
updates to the sparse checkout pattern.
Thus since af6a51875a, Git with such Git-aware virtual file systems
unsets the SKIP_WORKTREE bit for all files and commands like "git
status" have to fetch and examine them all.
Introduce a configuration setting sparse.expectFilesOutsideOfPatterns to
allow limiting the tracked set of files to a small set once again. A
Git-aware virtual file system or other application that wants to
maintain files outside of the sparse checkout can set this in a
repository to instruct Git not to check for the presence of
SKIP_WORKTREE files. The setting defaults to false, so most users of
sparse checkout will still get the benefit of an automatically updating
index to recover from the variety of difficult issues detailed in
af6a51875a for paths with SKIP_WORKTREE set despite the path being
present.
[1] https://lore.kernel.org/git/xmqqbmb1a7ga.fsf@gitster-ct.c.googlers.com/
[2] The three long paragraphs in the middle of
https://lore.kernel.org/git/CABPp-BH9tju7WVm=QZDOvaMDdZbpNXrVWQdN-jmfN8wC6YVhmw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFnFpzwGC11TLoLs8YK5yiisA5D5-fFjXnJsbESVDwZsA@mail.gmail.com/
[4] such as the vfsd described in
https://lore.kernel.org/git/20220207190320.2960362-1-jonathantanmy@google.com/
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The untracked cache test uses an avoid_racy function to deal with
an mtime-resolution challenge in testing: If an untracked cache
entry's mtime falls in the same second as the mtime of the index
the untracked cache was stored in, then it cannot be trusted.
Explicitly delaying tests is a simple effective strategy to
avoid these issues, but should be avoided where possible.
Switch from a delay-based strategy to instead backdating
all file changes using test-tool chmtime, where that is an
option, to shave 9 seconds off the test run time.
Don't update test cases that delay for other reasons, for now at
least (4 seconds).
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable use of 'merged_sparse_dir' in 'threeway_merge'. As with two-way
merge, the contents of each conflicted sparse directory are merged without
referencing the index, avoiding sparse index expansion.
As with two-way merge, the 't/t1092-sparse-checkout-compatibility.sh' test
'read-tree --merge with edit/edit conflicts in sparse directories' confirms
that three-way merges with edit/edit changes (both with and without
conflicts) inside a sparse directory result in the correct index state or
error message. To ensure the index is not unnecessarily expanded, add
three-way merge cases to 'sparse index is not expanded: read-tree'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable two-way merge with 'git read-tree' without expanding the sparse
index. When in a sparse index, a two-way merge will trivially succeed as
long as there are not changes to the same sparse directory in multiple trees
(i.e., sparse directory-level "edit-edit" conflicts). If there are such
conflicts, the merge will fail despite the possibility that individual files
could merge cleanly.
In order to resolve these "edit-edit" conflicts, "conflicted" sparse
directories are - rather than rejected - merged by traversing their
associated trees by OID. For each child of the sparse directory:
1. Files are merged as normal (see Documentation/git-read-tree.txt for
details).
2. Subdirectories are treated as sparse directories and merged in
'twoway_merge'. If there are no conflicts, they are merged according to
the rules in Documentation/git-read-tree.txt; otherwise, the subdirectory
is recursively traversed and merged.
This process allows sparse directories to be individually merged at the
necessary depth *without* expanding a full index.
The 't/t1092-sparse-checkout-compatibility.sh' test 'read-tree --merge with
edit/edit conflicts in sparse directories' tests two-way merges with 1)
changes inside sparse directories that do not conflict and 2) changes that
do conflict (with the correct file(s) reported in the error message).
Additionally, add two-way merge cases to 'sparse index is not expanded:
read-tree' to confirm that the index is not expanded regardless of whether
edit/edit conflicts are present in a sparse directory.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'git read-tree' is provided with a prefix, expand the index only if the
prefix is equivalent to a sparse directory or contained within one. If the
index is not expanded in these cases, 'ce_in_traverse_path' will indicate
that the relevant sparse directory is not in the prefix/traverse path,
skipping past it and not unpacking the appropriate tree(s).
If the prefix is in-cone, its sparse subdirectories (if any) will be
traversed correctly without index expansion.
The behavior of 'git read-tree' with prefixes 1) inside of cone, 2) equal to
a sparse directory, and 3) inside a sparse directory are all tested as part
of the 't/t1092-sparse-checkout-compatibility.sh' test 'read-tree --prefix',
ensuring that the sparse index case works the way it did prior to this
change as well as matching non-sparse index sparse-checkout.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable use of sparse index in 'git read-tree'. The integration in this patch
is limited only to usage of 'read-tree' that does not need additional
functional changes for the sparse index to behave as expected (i.e., produce
the same user-facing results as a non-sparse index sparse-checkout). To
ensure no unexpected behavior occurs, the index is explicitly expanded when:
* '--no-sparse-checkout' is specified (because it disables sparse-checkout)
* '--prefix' is specified (if the prefix is inside a sparse directory, the
prefixed tree cannot be properly traversed)
* two or more <tree-ish> arguments are specified ('twoway_merge' and
'threeway_merge' do not yet support merging sparse directories)
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests focused on how 'git read-tree' behaves in sparse checkouts. Extra
emphasis is placed on interactions with files outside the sparse cone, e.g.
merges with out-of-cone conflicts.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Exit with an error if a prefix provided to `git read-tree --prefix` begins
with '/'. In most cases, prefixes like this result in an "invalid path"
error; however, the repository root would be interpreted as valid when
specified as '--prefix=/'. This is due to leniency around trailing directory
separators on prefixes (e.g., allowing both '--prefix=my-dir' and
'--prefix=my-dir/') - the '/' in the prefix is actually the *trailing*
slash, although it could be misinterpreted as a *leading* slash.
To remove the confusing repo root-as-'/' case and make it clear that
prefixes should not begin with '/', exit with an error if the first
character of the provided prefix is '/'.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable the 'recursive' diff option for the diff executed as part of 'git
status'. Without the 'recursive' enabled, 'git status' reports index
changes incorrectly when the following conditions were met:
* sparse index is enabled
* there is a difference between the index and HEAD in a file inside a
*subdirectory* of a sparse directory
* the sparse directory index entry is *not* expanded in-core
Because it is not recursive by default, the diff in 'git status' reports
changes only at the level of files and directories that are immediate
children of a sparse directory, rather than recursing into directories with
changes to identify the modified file(s). As a result, 'git status' reports
the immediate subdirectory itself as "modified".
Example:
$ git init
$ mkdir -p sparse/sub
$ echo test >sparse/sub/foo
$ git add .
$ git commit -m "commit 1"
$ echo somethingelse >sparse/sub/foo
$ git add .
$ git commit -a -m "commit 2"
$ git sparse-checkout set --cone --sparse-index 'sparse'
$ git reset --soft HEAD~1
$ git status
On branch master
You are in a sparse checkout.
Changes to be committed:
(use "git restore --staged <file>..." to unstage)
modified: sparse/sub
Enabling the 'recursive' diff option in 'wt_status_collect_changes_index'
corrects this issue by allowing the diff to recurse into subdirectories of
sparse directories to find modified files. Given the same repository setup
as the example above, the corrected result of `git status` is:
$ git status
On branch master
You are in a sparse checkout.
Changes to be committed:
(use "git restore --staged <file>..." to unstage)
modified: sparse/sub/foo
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prevent the repository root from being collapsed into a sparse directory by
treating an empty path as "inside the sparse-checkout". When collapsing a
sparse index (e.g. in 'git sparse-checkout reapply'), the root directory
typically could not become a sparse directory due to the presence of in-cone
root-level files and directories. However, if no such in-cone files or
directories were present, there was no explicit check signaling that the
"repository root path" (an empty string, in the case of
'convert_to_sparse(...)') was in-cone, and a sparse directory index entry
would be created from the repository root directory.
The documentation in Documentation/git-sparse-checkout.txt explicitly states
that the files in the root directory are expected to be in-cone for a
cone-mode sparse-checkout. Collapsing the root into a sparse directory entry
violates that assumption, as sparse directory entries are expected to be
outside the sparse cone and have SKIP_WORKTREE enabled. This invalid state
in turn causes issues with commands that interact with the index, e.g.
'git status'.
Treating an empty (root) path as in-cone prevents the creation of a root
sparse directory in 'convert_to_sparse(...)'. Because the repository root is
otherwise never compared with sparse patterns (in both cone-mode and
non-cone sparse-checkouts), the new check does not cause additional changes
to how sparse patterns are applied.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Generation Data Chunk was implemented and tested in e8b63005c
(commit-graph: implement generation data chunk, 2021-01-16), but the
test was carefully constructed to work on systems with 32-bit dates.
Since the corrected commit date offsets still required more than 31
bits, this triggered writing the generation_data_overflow chunk.
However, upon closer look, the
write_graph_chunk_generation_data_overflow() method writes the offsets
to the chunk (as dictated by the format) but fill_commit_graph_info()
treats the value in the chunk as if it is the full corrected commit date
(not an offset). For some reason, this does not cause an issue when
using the FUTURE_DATE specified in t5318-commit-graph.sh, but it does
show up as a failure in 'git commit-graph verify' if we increase that
FUTURE_DATE to be above four billion.
Fix this error and create a 64-bit timestamp version of the test so we
can test these larger values.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'read_generation_data' member of 'struct commit_graph' was
introduced by 1fdc383c5 (commit-graph: use generation v2 only if entire
chain does, 2021-01-16). The intention was to avoid using corrected
commit dates if not all layers of a commit-graph had that data stored.
The logic in validate_mixed_generation_chain() at that point incorrectly
initialized read_generation_data to 1 if and only if the tip
commit-graph contained the Corrected Commit Date chunk.
This was "fixed" in 448a39e65 (commit-graph: validate layers for
generation data, 2021-02-02) to validate that read_generation_data was
either non-zero for all layers, or it would set read_generation_data to
zero for all layers.
The problem here is that read_generation_data is not initialized to be
non-zero anywhere!
This change initializes read_generation_data immediately after the chunk
is parsed, so each layer will have its value present as soon as
possible.
The read_generation_data member is used in fill_commit_graph_info() to
determine if we should use the corrected commit date or the topological
levels stored in the Commit Data chunk. Due to this bug, all previous
versions of Git were defaulting to topological levels in all cases!
This can be measured with some performance tests. Using the Linux kernel
as a testbed, I generated a complete commit-graph containing corrected
commit dates and tested the 'new' version against the previous, 'old'
version.
First, rev-list with --topo-order demonstrates a 26% improvement using
corrected commit dates:
hyperfine \
-n "old" "$OLD_GIT rev-list --topo-order -1000 v3.6" \
-n "new" "$NEW_GIT rev-list --topo-order -1000 v3.6" \
--warmup=10
Benchmark 1: old
Time (mean ± σ): 57.1 ms ± 3.1 ms
Range (min … max): 52.9 ms … 62.0 ms 55 runs
Benchmark 2: new
Time (mean ± σ): 45.5 ms ± 3.3 ms
Range (min … max): 39.9 ms … 51.7 ms 59 runs
Summary
'new' ran
1.26 ± 0.11 times faster than 'old'
These performance improvements are due to the algorithmic improvements
given by walking fewer commits due to the higher cutoffs from corrected
commit dates.
However, this comes at a cost. The additional I/O cost of parsing the
corrected commit dates is visible in case of merge-base commands that do
not reduce the overall number of walked commits.
hyperfine \
-n "old" "$OLD_GIT merge-base v4.8 v4.9" \
-n "new" "$NEW_GIT merge-base v4.8 v4.9" \
--warmup=10
Benchmark 1: old
Time (mean ± σ): 110.4 ms ± 6.4 ms
Range (min … max): 96.0 ms … 118.3 ms 25 runs
Benchmark 2: new
Time (mean ± σ): 150.7 ms ± 1.1 ms
Range (min … max): 149.3 ms … 153.4 ms 19 runs
Summary
'old' ran
1.36 ± 0.08 times faster than 'new'
Performance issues like this are what motivated 702110aac (commit-graph:
use config to specify generation type, 2021-02-25).
In the future, we could fix this performance problem by inserting the
corrected commit date offsets into the Commit Date chunk instead of
having that data in an extra chunk.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When computing the generation numbers for a commit-graph, we compute
the corrected commit dates and then check if their offsets from the
actual dates is too large to fit in the 32-bit Generation Data chunk.
However, there is a problem with this approach: if we have parsed the
generation data from the previous commit-graph, then we continue the
loop because the corrected commit date is already computed. This causes
an under-count in the number of overflow values.
It is incorrect to add an increment to num_generation_data_overflows
next to this 'continue' statement, because we might start
double-counting commits that are computed because of the depth-first
search walk from a commit with an earlier OID.
Instead, iterate over the full commit list at the end, checking the
offsets to see how many grow beyond the maximum value.
Create a new t5328-commit-graph-64-bit-time.sh test script to handle
special cases of testing 64-bit timestamps. This helps demonstrate this
bug in more cases. It still won't hit all potential cases until the next
change, which reenables reading generation numbers. Use the skip_all
trick from 0a2bfccb9c8 (t0051: use "skip_all" under !MINGW in
single-test file, 2022-02-04) to make the output clean when run on a
32-bit system.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The graph_git_behavior helper is useful for testing that certain Git
commands behave the same when using the commit-graph and when not using
the commit-graph. Extract it to a new lib-commit-graph.sh file for use
in new test scripts that will split out from t5318.
While doing this extraction, also extract graph_read_expect and the
logic for priming the test_oid_cache.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It can be helpful to verify that the 'struct commit_graph' that results
from parsing a commit-graph is correctly structured. The existence of
different chunks is not enough to verify that all of the optional
features are correctly enabled.
Update 'test-tool read-graph' to output an "options:" line that includes
information for different parts of the struct commit_graph.
In particular, this change demonstrates that the read_generation_data
option is never being enabled, which will be fixed in a later change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add "fast_unwind_on_malloc=0" to LSAN_OPTIONS to get more meaningful
stack traces from LSAN. This isn't required under ASAN which will emit
traces such as this one for a leak in "t/t0006-date.sh":
$ ASAN_OPTIONS=detect_leaks=1 ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x488b94 in strdup (t/helper/test-tool+0x488b94)
#1 0x9444a4 in xstrdup wrapper.c:29:14
#2 0x5995fa in parse_date_format date.c:991:24
#3 0x4d2056 in show_dates t/helper/test-date.c:39:2
#4 0x4d174a in cmd__date t/helper/test-date.c:116:3
#5 0x4cce89 in cmd_main t/helper/test-tool.c:127:11
#6 0x4cd1e3 in main common-main.c:52:11
#7 0x7fef3c695e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#8 0x422b09 in _start (t/helper/test-tool+0x422b09)
SUMMARY: AddressSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Whereas LSAN would emit this instead:
$ ./t0006-date.sh -vixd
[...]
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f2be1d614aa in strdup string/strdup.c:42:15
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
Now we'll instead git this sensible stack trace under
LSAN. I.e. almost the same one (but starting with "malloc", as is
usual for LSAN) as under ASAN:
Direct leak of 3 byte(s) in 1 object(s) allocated from:
#0 0x4323b8 in malloc (t/helper/test-tool+0x4323b8)
#1 0x7f012af5c4aa in strdup string/strdup.c:42:15
#2 0x5cb164 in xstrdup wrapper.c:29:14
#3 0x495ee9 in parse_date_format date.c:991:24
#4 0x453aac in show_dates t/helper/test-date.c:39:2
#5 0x453782 in cmd__date t/helper/test-date.c:116:3
#6 0x451d95 in cmd_main t/helper/test-tool.c:127:11
#7 0x451f1e in main common-main.c:52:11
#8 0x7f012aef5e49 in __libc_start_main csu/../csu/libc-start.c:314:16
#9 0x42e0a9 in _start (t/helper/test-tool+0x42e0a9)
SUMMARY: LeakSanitizer: 3 byte(s) leaked in 1 allocation(s).
Aborted
As the option name suggests this does make things slower, e.g. for
t0001-init.sh we're around 10% slower:
$ hyperfine -L v 0,1 'LSAN_OPTIONS=fast_unwind_on_malloc={v} make T=t0001-init.sh' -r 3
Benchmark 1: LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh
Time (mean ± σ): 2.135 s ± 0.015 s [User: 1.951 s, System: 0.554 s]
Range (min … max): 2.122 s … 2.152 s 3 runs
Benchmark 2: LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh
Time (mean ± σ): 1.981 s ± 0.055 s [User: 1.769 s, System: 0.488 s]
Range (min … max): 1.941 s … 2.044 s 3 runs
Summary
'LSAN_OPTIONS=fast_unwind_on_malloc=1 make T=t0001-init.sh' ran
1.08 ± 0.03 times faster than 'LSAN_OPTIONS=fast_unwind_on_malloc=0 make T=t0001-init.sh'
I think that's more than worth it to get the more meaningful stack
traces, we can always provide LSAN_OPTIONS=fast_unwind_on_malloc=0 for
one-off "fast" runs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the GIT_BUILD_DIR from a path like "/path/to/build/t/.." to
"/path/to/build". The "TEST_DIRECTORY" here is already made an
absolute path a few lines above this.
We could simply do $(cd "$TEST_DIRECTORY"/.." && pwd) here, but as
noted in the preceding commit the "$TEST_DIRECTORY" can't be anything
except the path containing this test-lib.sh file at this point, so we
can more cheaply and equally strip the "/t" off the end.
This change will be helpful to LSAN_OPTIONS which will want to strip
the build directory path from filenames, which we couldn't do if we
had a "/.." in there.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct a misleading comment added by me in 62f539043c7 (test-lib:
Allow overriding of TEST_DIRECTORY, 2010-08-19), and add an assertion
that TEST_DIRECTORY cannot point to any directory except the "t"
directory in the top-level of git.git.
This assertion is in effect not new, since we'd already die if that
wasn't the case[1], but it and the updated commentary help to make
that clearer.
The existing comments were also on the wrong arms of the
"if". I.e. the "allow tests to override this" was on the "test -z"
arm. That came about due to a combination of 62f539043c7 and
85176d72513 (test-lib.sh: convert $TEST_DIRECTORY to an absolute path,
2013-11-17).
Those earlier comments could be read as allowing the "$TEST_DIRECTORY"
to be some path outside of t/. As explained in the updated comment
that's impossible, rather it was meant for *tests* that ran outside of
t/, i.e. the "t0000-basic.sh" tests that use "lib-subtest.sh".
Those tests have a different working directory, but they set the
"TEST_DIRECTORY" to the same path for bootstrapping. The comments now
reflect that, and further comment on why we have a hard dependency on
this.
1. https://lore.kernel.org/git/220222.86o82z8als.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change our ASAN_OPTIONS and LSAN_OPTIONS to set defaults for those
variables, rather than punting out entirely if we already have them in
the environment.
We want to take any user-provided settings over our own, but we can do
that by prepending our defaults to the variable. The libsanitizer
options parsing has "last option wins" semantics.
It's now possible to do e.g.:
LSAN_OPTIONS=report_objects=1 ./t0006-date.sh
And not have the "report_objects=1" setting overwrite our sensible
default of "abort_on_error=1", but by prepending to the list we ensure
that:
LSAN_OPTIONS=report_objects=1:abort_on_error=0 ./t0006-date.sh
Will take the desired "abort_on_error=0" over our default.
See b0f4c9087e1 (t: support clang/gcc AddressSanitizer, 2014-12-08)
for the original pattern being altered here, and
85b81b35ff9 (test-lib: set LSAN_OPTIONS to abort by default,
2017-09-05) for when LSAN_OPTIONS was added in addition to the
then-existing ASAN_OPTIONS.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In its current state, the t7519 test dealing with untracked cache
assumes that "git update-index --untracked-cache" will *populate* the
untracked cache. This is not correct - it will only add an empty
untracked cache structure to the index.
If we're going to compare two git status runs with something
interesting happening in-between, we need to ensure that the index is
in a stable/steady state *before* that first run.
Achieve this by adding another prior "git status" run.
At this stage this change does nothing, because there is a bug,
addressed in the next patch, whereby once the empty untracked cache
structure is added by the update-index invocation, the untracked cache
gets updated in every subsequent "git status" call, but the index with
these updates does not get written down.
That bug actually invalidates this entire test case - but we're fixing
that next.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t7519 there is a test that writes files to disk, and immediately
writes the index with the untracked cache. Because of
mtime-comparison logic that uses a 1-second resolution, this means
the cached entries are not trusted/used under some circumstances
(see read-cache.c#is_racy_stat()).
Untracked cache tests in t7063 use a 1-second delay to avoid this
issue, but we don't want to introduce arbitrary slowdowns, so instead
use test-tool chmtime to backdate the files slightly. The t7063
delays are a #leftoverbit, to be worked on in a separate series.
This change doesn't actually affect the outcome of the test, but does
enhance its validity, and becomes relevant after later changes.
Signed-off-by: Tao Klerks <tao@klerks.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Users who are accustomed to doing `git checkout <tag>` assume that
`git switch <tag>` will do the same thing. Inform them of the --detach
option so they aren't left wondering why `git switch` doesn't work but
`git checkout` does.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plug (some) memory leaks around parse_date_format().
* ab/date-mode-release:
date API: add and use a date_mode_release()
date API: add basic API docs
date API: provide and use a DATE_MODE_INIT
date API: create a date.h, split from cache.h
cache.h: remove always unused show_date_human() declaration
|
|
Some code clean-up in the "git grep" machinery.
* ab/grep-patterntype:
grep: simplify config parsing and option parsing
grep.c: do "if (bool && memchr())" not "if (memchr() && bool)"
grep.h: make "grep_opt.pattern_type_option" use its enum
grep API: call grep_config() after grep_init()
grep.c: don't pass along NULL callback value
built-ins: trust the "prefix" from run_builtin()
grep tests: add missing "grep.patternType" config tests
grep tests: create a helper function for "BRE" or "ERE"
log tests: check if grep_config() is called by "log"-like cmds
grep.h: remove unused "regex_t regexp" from grep_opt
|
|
"git clone --filter=... --recurse-submodules" only makes the
top-level a partial clone, while submodules are fully cloned. This
behaviour is changed to pass the same filter down to the submodules.
* js/apply-partial-clone-filters-recursively:
clone, submodule: pass partial clone filters to submodules
|
|
Unify more messages to help l10n.
* ja/i18n-common-messages:
i18n: fix some misformated placeholders in command synopsis
i18n: remove from i18n strings that do not hold translatable parts
i18n: factorize "invalid value" messages
i18n: factorize more 'incompatible options' messages
|
|
Further tweaks on progress API.
* ab/only-single-progress-at-once:
pack-bitmap-write.c: don't return without stop_progress()
progress API: unify stop_progress{,_msg}(), fix trace2 bug
progress.c: refactor stop_progress{,_msg}() to use helpers
progress.c: use dereferenced "progress" variable, not "(*p_progress)"
progress.h: format and be consistent with progress.c naming
progress.c tests: test some invalid usage
progress.c tests: make start/stop commands on stdin
progress.c test helper: add missing braces
leak tests: fix a memory leak in "test-progress" helper
|
|
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
|
|
Error output given in response to an ambiguous object name has been
improved.
* ab/ambiguous-object-name:
object-name: re-use "struct strbuf" in show_ambiguous_object()
object-name: iterate ambiguous objects before showing header
object-name: show date for ambiguous tag objects
object-name: make ambiguous object output translatable
object-name: explicitly handle bad tags in show_ambiguous_object()
object-name: explicitly handle OBJ_BAD in show_ambiguous_object()
object-name tests: add tests for ambiguous object blind spots
|
|
When generating a message for a stash, "git stash" only records the
part of the branch name to the right of the last "/". e.g. if HEAD is at
"foo/bar/baz", "git stash" generates a message prefixed with "WIP on
baz:" instead of "WIP on foo/bar/baz:".
Fix this by using skip_prefix() to skip "refs/heads/" instead of looking
for the last instance of "/".
Reported-by: Kraymer <kraymer@gmail.com>
Reported-by: Daniel Hahler <git@thequod.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
