| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* fixes/2.45.1/2.40:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
Revert overly aggressive "layered defence" that went into 2.45.1
and friends, which broke "git-lfs", "git-annex", and other use
cases, so that we can rebuild necessary counterparts in the open.
* jc/fix-2.45.1-and-friends-for-2.39:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
The last user of this variable went away in 4a6e4b9602 (CI: remove
Travis CI support, 2021-11-23), so it's doing nothing except making it
more confusing to find out which packages _are_ installed.
[jc: cherry-picked from v2.45.0-1-g9d4453e8d6]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "whitespace check" task that was enabled for GitHub Actions CI
has been ported to GitLab CI.
* jt/port-ci-whitespace-check-to-gitlab:
gitlab-ci: add whitespace error check
ci: make the whitespace report optional
ci: separate whitespace check script
github-ci: fix link to whitespace error
ci: pre-collapse GitLab CI sections
|
|
The "test-tool" has been taught to run testsuite tests in parallel,
bypassing the need to use the "prove" tool.
* js/unit-test-suite-runner:
cmake: let `test-tool` run the unit tests, too
ci: use test-tool as unit test runner on Windows
t/Makefile: run unit tests alongside shell tests
unit tests: add rule for running with test-tool
test-tool run-command testsuite: support unit tests
test-tool run-command testsuite: remove hardcoded filter
test-tool run-command testsuite: get shell from env
t0080: turn t-basic unit test into a helper
|
|
CI fix.
* jk/ci-macos-gcc13-fix:
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
|
|
Unbreak CI jobs so that we do not attempt to use Python 2 that has
been removed from the platform.
* ps/ci-python-2-deprecation:
ci: fix Python dependency on Ubuntu 24.04
|
|
The last user of this variable went away in 4a6e4b9602 (CI: remove
Travis CI support, 2021-11-23), so it's doing nothing except making it
more confusing to find out which packages _are_ installed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tests to ensure interoperability between reftable written by jgit
and our code have been added and enabled in CI.
* ps/ci-test-with-jgit:
t0612: add tests to exercise Git/JGit reftable compatibility
t0610: fix non-portable variable assignment
t06xx: always execute backend-specific tests
ci: install JGit dependency
ci: make Perforce binaries executable for all users
ci: merge scripts which install dependencies
ci: fix setup of custom path for GitLab CI
ci: merge custom PATH directories
ci: convert "install-dependencies.sh" to use "/bin/sh"
ci: drop duplicate package installation for "linux-gcc-default"
ci: skip sudo when we are already root
ci: expose distro name in dockerized GitHub jobs
ci: rename "runs_on_pool" to "distro"
|
|
Although the previous commit changed t/Makefile to run unit tests
alongside shell tests, the Windows CI still needs a separate unit-tests
step due to how the test sharding works.
We want to avoid using `prove` as a test running on Windows due to
performance issues [1], so use the new test-tool runner instead.
[1] https://lore.kernel.org/git/850ea42c-f103-68d5-896b-9120e2628686@gmx.de/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a wrapper script to allow `prove` to run both shell tests and unit
tests from a single invocation. This avoids issues around running prove
twice in CI, as discussed in [1].
Additionally, this moves the unit tests into the main dev workflow, so
that errors can be spotted more quickly. Accordingly, we remove the
separate unit tests step for Linux CI. (We leave the Windows CI
unit-test step as-is, because the sharding scheme there involves
selecting specific test files rather than running `make test`.)
[1] https://lore.kernel.org/git/pull.1613.git.1699894837844.gitgitgadget@gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Newer versions of Ubuntu have dropped Python 2 starting with Ubuntu
23.04. By default though, our CI setups will try to use that Python
version on all Ubuntu-based jobs except for the "linux-gcc" one.
We didn't notice this issue due to two reasons:
- The "ubuntu:latest" tag always points to the latest LTS release.
Until a few weeks ago this was Ubuntu 22.04, which still had Python
2.
- Our Docker-based CI jobs had their own script to install
dependencies until 9cdeb34b96 (ci: merge scripts which install
dependencies, 2024-04-12), where we didn't even try to install
Python at all for many of them.
Since the CI refactorings have originally been implemented, Ubuntu
24.04 was released, and it being an LTS versions means that the "latest"
tag now points to that Python-2-less version. Consequently, those jobs
that use "ubuntu:latest" broke.
Address this by using Python 2 on Ubuntu 20.04, only, whereas we use
Python 3 on all other Ubuntu jobs. Eventually, we should think about
dropping support for Python 2 completely.
Reported-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `check-whitespace` CI job generates a formatted output file
containing whitespace error information. As not all CI providers support
rendering a formatted summary, make its generation optional.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `check-whitespace` CI job is only available as a GitHub action. To
help enable this job with other CI providers, first separate the logic
performing the whitespace check into its own script. In subsequent
commits, this script is further generalized allowing its reuse.
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sections of CI output defined by `begin_group()` and `end_group()` are
expanded in GitLab pipelines by default. This can make CI job output
rather noisy and harder to navigate. Update the behavior for GitLab
pipelines to now collapse sections by default.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 5e47215080 (fuzz: add basic fuzz testing target., 2018-10-12), we
have compiled object files for the fuzz tests as part of the default
'make all' target. This helps prevent bit-rot in lesser-used parts of
the codebase, by making sure that incompatible changes are caught at
build time.
However, since we never linked the fuzzer executables, this did not
protect us from link-time errors. As of 8b9a42bf48 (fuzz: fix fuzz test
build rules, 2024-01-19), it's now possible to link the fuzzer
executables without using a fuzzing engine and a variety of
compiler-specific (and compiler-version-specific) flags, at least on
Linux. So let's add a platform-specific option in config.mak.uname to
link the executables as part of the default `make all` target.
Since linking the fuzzer executables without a fuzzing engine does not
require a C++ compiler, we can change the FUZZ_PROGRAMS build rule to
use $(CC) by default. This avoids compiler mis-match issues when
overriding $(CC) but not $(CXX). When we *do* want to actually link with
a fuzzing engine, we can set $(FUZZ_CXX). The build instructions in the
CI fuzz-smoke-test job and in the Makefile comment have been updated
accordingly.
While we're at it, we can consolidate some of the fuzzer build
instructions into one location in the Makefile.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.41: (38 commits)
Git 2.41.1
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
...
|
|
* maint-2.40: (39 commits)
Git 2.40.2
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
upload-pack: disable lazy-fetching by default
...
|
|
* maint-2.39: (38 commits)
Git 2.39.4
fsck: warn about symlink pointing inside a gitdir
core.hooksPath: add some protection while cloning
init.templateDir: consider this config setting protected
clone: prevent hooks from running during a clone
Add a helper function to compare file contents
init: refactor the template directory discovery into its own function
find_hook(): refactor the `STRIP_EXTENSION` logic
clone: when symbolic links collide with directories, keep the latter
entry: report more colliding paths
t5510: verify that D/F confusion cannot lead to an RCE
submodule: require the submodule path to contain directories only
clone_submodule: avoid using `access()` on directories
submodules: submodule paths must not contain symlinks
clone: prevent clashing git dirs when cloning submodule in parallel
t7423: add tests for symlinked submodule directories
has_dir_name(): do not get confused by characters < '/'
docs: document security issues around untrusted .git dirs
upload-pack: disable lazy-fetching by default
fetch/clone: detect dubious ownership of local repositories
...
|
|
This patch speeds up the `asan`/`lsan` jobs that are really slow enough
already.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
Every once in a while, the `git-p4` tests flake for reasons outside of
our control. It typically fails with "Connection refused" e.g. here:
https://github.com/git/git/actions/runs/5969707156/job/16196057724
[...]
+ git p4 clone --dest=/home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git //depot
Initialized empty Git repository in /home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git/.git/
Perforce client error:
Connect to server failed; check $P4PORT.
TCP connect to localhost:9807 failed.
connect: 127.0.0.1:9807: Connection refused
failure accessing depot: could not run p4
Importing from //depot into /home/runner/work/git/git/t/trash directory.t9807-git-p4-submit/git
[...]
This happens in other jobs, too, but in the `linux-asan`/`linux-ubsan`
jobs it hurts the most because those jobs often take an _awfully_ long
time to run, therefore re-running a failed `linux-asan`/`linux-ubsan`
jobs is _very_ costly.
The purpose of the `linux-asan`/`linux-ubsan` jobs is to exercise the C
code of Git, anyway, and any part of Git's source code that the `git-p4`
tests run and that would benefit from the attention of ASAN/UBSAN are
run better in other tests anyway, as debugging C code run via Python
scripts can get a bit hairy.
In fact, it is not even just `git-p4` that is the problem (even if it
flakes often enough to be problematic in the CI builds), but really the
part about Python scripts. So let's just skip any Python parts of the
tests from being run in that job.
For good measure, also skip the Subversion tests because debugging C
code run via Perl scripts is as much fun as debugging C code run via
Python scripts. And it will reduce the time this very expensive job
takes, which is a big benefit.
Backported to `maint-2.39` as another step to get that branch's CI
builds back to a healthy state.
Backported-from: 6ba913629f (ci(linux-asan-ubsan): let's save some time, 2023-08-29)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
In April, GitHub announced that the `macos-13` pool is available:
https://github.blog/changelog/2023-04-24-github-actions-macos-13-is-now-available/.
It is only a matter of time until the `macos-12` pool is going away,
therefore we should switch now, without pressure of a looming deadline.
Since the `macos-13` runners no longer include Python2, we also drop
specifically testing with Python2 and switch uniformly to Python3, see
https://github.com/actions/runner-images/blob/HEAD/images/macos/macos-13-Readme.md
for details about the software available on the `macos-13` pool's
runners.
Also, on macOS 13, Homebrew seems to install a `gcc@9` package that no
longer comes with a regular `unistd.h` (there seems only to be a
`ssp/unistd.h`), and hence builds would fail with:
In file included from base85.c:1:
git-compat-util.h:223:10: fatal error: unistd.h: No such file or directory
223 | #include <unistd.h>
| ^~~~~~~~~~
compilation terminated.
The reason why we install GCC v9.x explicitly is historical, and back in
the days it was because it was the _newest_ version available via
Homebrew: 176441bfb58 (ci: build Git with GCC 9 in the 'osx-gcc' build
job, 2019-11-27).
To reinstate the spirit of that commit _and_ to fix that build failure,
let's switch to the now-newest GCC version: v13.x.
Backported-from: 682a868f67 (ci: upgrade to using macos-13, 2023-11-03)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
|
|
We have some tests in t5310 that use JGit to verify that bitmaps can be
read both by Git and by JGit. We do not execute these tests in our CI
jobs though because we don't make JGit available there. Consequently,
the tests basically bitrot because almost nobody is ever going to have
JGit in their path.
Install JGit to plug this test gap.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Perforce binaries are only made executable for the current user. On
GitLab CI though we execute tests as a different user than "root", and
thus these binaries may not be executable by that test user at all. This
has gone unnoticed so far because those binaries are optional -- in case
they don't exist we simply skip over tests requiring them.
Fix the setup so that we set the executable bits for all users.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have two different scripts which install dependencies, one for
dockerized jobs and one for non-dockerized ones. Naturally, these
scripts have quite some duplication. Furthermore, either of these
scripts is missing some test dependencies that the respective other
script has, thus reducing test coverage.
Merge those two scripts such that there is a single source of truth for
test dependencies, only.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Part of "install-dependencies.sh" is to install some binaries required
for tests into a custom directory that gets added to the PATH. This
directory is located at "$HOME/path" and thus depends on the current
user that the script executes as.
This creates problems for GitLab CI, which installs dependencies as the
root user, but runs tests as a separate, unprivileged user. As their
respective home directories are different, we will end up using two
different custom path directories. Consequently, the unprivileged user
will not be able to find the binaries that were set up as root user.
Fix this issue by allowing CI to override the custom path, which allows
GitLab to set up a constant value that isn't derived from "$HOME".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're downloading various executables required by our tests. Each of
these executables goes into its own directory, which is then appended to
the PATH variable. Consequently, whenever we add a new dependency and
thus a new directory, we would have to adapt to this change in several
places.
Refactor this to instead put all binaries into a single directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're about to merge the "install-docker-dependencies.sh" script into
"install-dependencies.sh". This will also move our Alpine-based jobs
over to use the latter script. This script uses the Bash shell though,
which is not available by default on Alpine Linux.
Refactor "install-dependencies.sh" to use "/bin/sh" instead of Bash.
This requires us to get rid of the pushd/popd invocations, which are
replaced by some more elaborate commands that download or extract
executables right to where they are needed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "linux-gcc-default" job installs common Ubuntu packages. This is
already done in the distro-specific switch, so we basically duplicate
the effort here.
Drop the duplicate package installations and inline the variable that
contains those common packages.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our "install-dependencies.sh" script is executed by non-dockerized jobs
to install dependencies. These jobs don't run with "root" permissions,
but with a separate user. Consequently, we need to use sudo(8) there to
elevate permissions when installing packages.
We're about to merge "install-docker-dependencies.sh" into that script
though, and our Docker containers do run as "root". Using sudo(8) is
thus unnecessary there, even though it would be harmless. On some images
like Alpine Linux though there is no sudo(8) available by default, which
would consequently break the build.
Adapt the script to make "sudo" a no-op when running as "root" user.
This allows us to easily reuse the script for our dockerized jobs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "runs_on_pool" environment variable is used by our CI scripts to
distinguish the different kinds of operating systems. It is quite
specific to GitHub Actions though and not really a descriptive name.
Rename the variable to "distro" to clarify its intent.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new fuzz target that exercises the parsing of git configs.
The existing git_config_from_mem function is a perfect entry point
for fuzzing as it exercises the same code paths as the rest of the
config parsing functions and offers an easily fuzzable interface.
Config parsing is a useful thing to fuzz because it operates on user
controlled data and is a central component of many git operations.
Signed-off-by: Brian C Tracy <brian.tracy33@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way CI testing used "prove" could lead to running the test
suite twice needlessly, which has been corrected.
* js/ci-discard-prove-state:
ci: avoid running the test suite _twice_
ci: add support for GitLab CI
ci: install test dependencies for linux-musl
ci: squelch warnings when testing with unusable Git repo
ci: unify setup of some environment variables
ci: split out logic to set up failed test artifacts
ci: group installation of Docker dependencies
ci: make grouping setup more generic
ci: reorder definitions for grouping functions
|
|
Add CI jobs for both GitHub Workflows and GitLab CI to run Git with the
new reftable backend.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
oss-fuzz tests are built and run in CI.
* js/oss-fuzz-build-in-ci:
ci: build and run minimal fuzzers in GitHub CI
fuzz: fix fuzz test build rules
|
|
To prevent bitrot, we would like to regularly exercise the fuzz tests in
order to make sure they still link & run properly. We already compile
the fuzz test objects as part of the default `make` target, but we do
not link the executables due to the fuzz tests needing specific
compilers and compiler features. This has lead to frequent build
breakages for the fuzz tests.
To remedy this, we can add a CI step to actually link the fuzz
executables, and run them (with finite input rather than the default
infinite random input mode) to verify that they execute properly.
Since the main use of the fuzz tests is via OSS-Fuzz [1], and OSS-Fuzz
only runs tests on Linux [2], we only set up a CI test for the fuzzers
on Linux.
[1] https://github.com/google/oss-fuzz
[2] https://google.github.io/oss-fuzz/further-reading/fuzzer-environment/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a job to GitLab CI which runs tests on macOS, which matches the
equivalent "osx-clang" job that we have for GitHub Workflows. One
significant difference though is that this new job runs on Apple M1
machines and thus uses the "arm64" architecture. As GCC does not yet
support this comparatively new architecture we cannot easily include an
equivalent for the "osx-gcc" job that exists in GitHub Workflows.
Note that one test marked as `test_must_fail` is surprisingly passing:
t7815-grep-binary.sh (Wstat: 0 Tests: 22 Failed: 0)
TODO passed: 12
This seems to boil down to an unexpected difference in how regcomp(3P)
works when matching NUL bytes. Cross-checking with the respective GitHub
job shows that this is not an issue unique to the GitLab CI job as it
passes in the same way there.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When setting up Perforce on macOS we put both `p4` and `p4d` into
"$HOME/bin". On GitHub CI this directory is indeed contained in the PATH
environment variable and thus there is no need for additional setup than
to put the binaries there. But GitLab CI does not do this, and thus our
Perforce-based tests would be skipped there even though we download the
binaries.
Refactor the setup code to become more robust by downloading binaries
into a separate directory which we then manually append to our PATH.
This matches what we do on Linux-based jobs.
Note that it may seem like we already did append "$HOME/bin" to PATH
because we're actually removing the lines that adapt PATH. But we only
ever adapted the PATH variable in "ci/install-dependencies.sh", and
didn't adapt it when running "ci/run-build-and-test.sh". Consequently,
the required binaries wouldn't be found during the test run unless the
CI platform already had the "$HOME/bin" in PATH right from the start.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The TEST_OUTPUT_DIRECTORY environment variable can be used to instruct
the test suite to write test data and test results into a different
location than into "t/". The "ci/print-test-failures.sh" script does not
know to handle this environment variable though, which means that it
will search for test results in the wrong location if it was set.
Update the script to handle TEST_OUTPUT_DIRECTORY so that we can start
to set it in our CI.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our GitHub Workflows definitions have a static analysis job that
runs the following tasks:
- Coccinelle to check for suggested refactorings.
- `make hdr-check` to check for missing includes or forward
declarations in our header files.
- `make check-pot` to check our translations for issues.
- `./ci/check-directional-formatting.bash` to check whether our
sources contain any Unicode directional formatting code points.
Add an equivalent job to our GitLab CI definitions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way CI testing used "prove" could lead to running the test
suite twice needlessly, which has been corrected.
* js/ci-discard-prove-state:
ci: avoid running the test suite _twice_
|
|
Add support for GitLab CI.
* ps/ci-gitlab:
ci: add support for GitLab CI
ci: install test dependencies for linux-musl
ci: squelch warnings when testing with unusable Git repo
ci: unify setup of some environment variables
ci: split out logic to set up failed test artifacts
ci: group installation of Docker dependencies
ci: make grouping setup more generic
ci: reorder definitions for grouping functions
|
|
Process to add some form of low-level unit tests has started.
* js/doc-unit-tests:
ci: run unit tests in CI
unit tests: add TAP unit test framework
unit tests: add a project plan document
|
|
This is a late amendment of 4a6e4b960263 (CI: remove Travis CI support,
2021-11-23), whereby the `.prove` file (being written by the `prove`
command that is used to run the test suite) is no longer retained
between CI builds: This feature was only ever used in the Travis CI
builds, we tried for a while to do the same in Azure Pipelines CI runs
(but I gave up on it after a while), and we never used that feature in
GitHub Actions (nor does the new GitLab CI code use it).
Retaining the Prove cache has been fragile from the start, even though
the idea seemed good at the time, the idea being that the `.prove` file
caches information about previous `prove` runs (`save`) and uses them
(`slow`) to run the tests in the order from longer-running to shorter
ones, making optimal use of the parallelism implied by `--jobs=<N>`.
However, using a Prove cache can cause some surprising behavior: When
the `prove` caches information about a test script it has run,
subsequent `prove` runs (with `--state=slow`) will run the same test
script again even if said script is not specified on the `prove`
command-line!
So far, this bug did not matter. Right until d8f416bbb87c (ci: run unit
tests in CI, 2023-11-09) did it not matter.
But starting with that commit, we invoke `prove` _twice_ in CI, once to
run the regular test suite of regression test scripts, and once to run
the unit tests. Due to the bug, the second invocation re-runs all of the
tests that were already run as part of the first invocation. This not
only wastes build minutes, it also frequently causes the `osx-*` jobs to
fail because they already take a long time and now are likely to run
into a timeout.
The worst part about it is that there is actually no benefit to keep
running with `--state=slow,save`, ever since we decided no longer to
try to reuse the Prove cache between CI runs.
So let's just drop that Prove option and live happily ever after.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Run unit tests in both Cirrus and GitHub CI. For sharded CI instances
(currently just Windows on GitHub), run only on the first shard. This is
OK while we have only a single unit test executable, but we may wish to
distribute tests more evenly when we add new unit tests in the future.
We may also want to add more status output in our unit test framework,
so that we can do similar post-processing as in
ci/lib.sh:handle_failed_tests().
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already support Azure Pipelines and GitHub Workflows in the Git
project, but until now we do not have support for GitLab CI. While it is
arguably not in the interest of the Git project to maintain a ton of
different CI platforms, GitLab has recently ramped up its efforts and
tries to contribute to the Git project more regularly.
Part of a problem we hit at GitLab rather frequently is that our own,
custom CI setup we have is so different to the setup that the Git
project has. More esoteric jobs like "linux-TEST-vars" that also set a
couple of environment variables do not exist in GitLab's custom CI
setup, and maintaining them to keep up with what Git does feels like
wasted time. The result is that we regularly send patch series upstream
that fail to compile or pass tests in GitHub Workflows. We would thus
like to integrate the GitLab CI configuration into the Git project to
help us send better patch series upstream and thus reduce overhead for
the maintainer. Results of these pipeline runs will be made available
(at least) in GitLab's mirror of the Git project at [1].
This commit introduces the integration into our regular CI scripts so
that most of the setup continues to be shared across all of the CI
solutions. Note that as the builds on GitLab CI run as unprivileged
user, we need to pull in both sudo and shadow packages to our Alpine
based job to set this up.
[1]: https://gitlab.com/gitlab-org/git
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The linux-musl CI job executes tests on Alpine Linux, which is based on
musl libc instead of glibc. We're missing some test dependencies though,
which causes us to skip a subset of tests.
Install these test dependencies to increase our test coverage on this
platform. There are still some missing test dependecies, but these do
not have a corresponding package in the Alpine repositories:
- p4 and p4d, both parts of the Perforce version control system.
- cvsps, which generates patch sets for CVS.
- Subversion and the SVN::Core Perl library, the latter of which is
not available in the Alpine repositories. While the tool itself is
available, all Subversion-related tests are skipped without the
SVN::Core Perl library anyway.
The Apache2-based tests require a bit more care though. For one, the
module path is different on Alpine Linux, which requires us to add it to
the list of known module paths to detect it. But second, the WebDAV
module on Alpine Linux is broken because it does not bundle the default
database backend [1]. We thus need to skip the WebDAV-based tests on
Alpine Linux for now.
[1]: https://gitlab.alpinelinux.org/alpine/aports/-/issues/13112
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our CI jobs that run on Docker also use mostly the same architecture to
build and test Git via the "ci/run-build-and-tests.sh" script. These
scripts also provide some functionality to massage the Git repository
we're supposedly operating in.
In our Docker-based infrastructure we may not even have a Git repository
available though, which leads to warnings when those functions execute.
Make the helpers exit gracefully in case either there is no Git in our
PATH, or when not running in a Git repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both GitHub Actions and Azure Pipelines set up the environment variables
GIT_TEST_OPTS, GIT_PROVE_OPTS and MAKEFLAGS. And while most values are
actually the same, the setup is completely duplicate. With the upcoming
support for GitLab CI this duplication would only extend even further.
Unify the setup of those environment variables so that only the uncommon
parts are separated. While at it, we also perform some additional small
improvements:
- We now always pass `--state=failed,slow,save` via GIT_PROVE_OPTS.
It doesn't hurt on platforms where we don't persist the state, so
this further reduces boilerplate.
- When running on Windows systems we set `--no-chain-lint` and
`--no-bin-wrappers`. Interestingly though, we did so _after_
already having exported the respective environment variables.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have some logic in place to create a directory with the output from
failed tests, which will then subsequently be uploaded as CI artifacts.
We're about to add support for GitLab CI, which will want to reuse the
logic.
Split the logic into a separate function so that it is reusable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
