| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
with minor hand resolving on git-tag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The platform specific tweaking part was using 'uname -o' which
is not always available. Squelch error message from it.
It was suggested to chain the if..else, but I chose not to, because
maintaining the nested if..else if..else..endif endif to match is a
pain. If we had "elif", things would have been different, though.
While we are at it, try not to invoke 'uname -s' for each platform
candidate.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
exports $prefix and makes Documentation/Makefile following it also.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Since some platforms do not support mmap() at all, and others do only just
so, this patch introduces the option to fake mmap() and munmap() by
malloc()ing and read()ing explicitely.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
|
|
Borrow from NO_MMAP patch by Johannes, squelch compiler warnings by
declaring gitstrcasestr() when we use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It reorganizes the code and also has saner command line options
syntax. Unlike git-applymbox, it can take more than one mailbox
file from the command line, as well as reading from the standard
input when '-' is specified.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also note which version of GIT produced the patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
H. Peter Anvin says that Samba "promotes" symlinks to hardlinks while
Cygwin itself uses .lnk files to emulate symlinks. Avoid using symbolic
link for .git/HEAD on Cygwin.
This does not help the symlinks recorded in trees as user data, but
at least we do not use them for our own bookkeeping.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Fix mismerge typo.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
GIT already did everything I wanted it to do since mid 0.99.7,
and it has almost everything I want it to have now, except a
couple of minor tweaks and enhancements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When the platform lacks certain git subcommands, omit them from the
list of subcommands that are available from "git" wrapper.
Noticed by Geert Bosch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
iconv is installed in /usr/local.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
- The location of openssl development files got customizable.
- The location of iconv development files got customizable.
- Pass $TAR down to t5000 test so that the user can override with
'gmake TAR=gtar'.
- Solaris 'bc' does not seem to grok "define abs()". There is no
reason to use bc there -- expr would do.
Signed-off-by: Junio C Hamano <junio@twinsun.com>
|
|
This adds the counterpart of git-update-ref that lets you read
and create "symbolic refs". By default it uses a symbolic link
to represent ".git/HEAD -> refs/heads/master", but it can be compiled
to use the textfile symbolic ref.
The places that did 'readlink .git/HEAD' and 'ln -s refs/heads/blah
.git/HEAD' have been converted to use new git-symbolic-ref command, so
that they can deal with either implementation.
Signed-off-by: Junio C Hamano <junio@twinsun.com>
|
|
|
|
|
|
|
|
After seeing Jeff's guide, I changed my mind about the
big-rename transition plan. Even if Porcelains are kept up to
date, those web documents that describes older world order would
live longer and people will stumble across them via google
searches. And who knows how many mirrored copies there are.
The backward compatible symbolic links *will* be removed before
1.0. But that will not happen in 0.99.8.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is from Peter Eriksen, but further fixed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a careful version of the script stuff that currently just
blindly writes HEAD with a new value.
You can use
git-update-ref HEAD <newhead>
or
git-update-ref HEAD <newhead> <oldhead>
where the latter version verifies that the old value of HEAD matches
oldhead.
It basically allows a "ref" file to be a symbolic pointer to another ref
file by starting with the four-byte header sequence of "ref:".
More importantly, it allows the update of a ref file to follow these
symbolic pointers, whether they are symlinks or these "regular file
symbolic refs".
NOTE! It follows _real_ symlinks only if they start with "refs/":
otherwise it will just try to read them and update them as a regular file
(ie it will allow the filesystem to follow them, but will overwrite such a
symlink to somewhere else with a regular filename).
In general, using
git-update-ref HEAD "$head"
should be a _lot_ safer than doing
echo "$head" > "$GIT_DIR/HEAD"
both from a symlink following standpoint _and_ an error checking
standpoint. The "refs/" rule for symlinks means that symlinks that point
to "outside" the tree are safe: they'll be followed for reading but not
for writing (so we'll never write through a ref symlink to some other
tree, if you have copied a whole archive by creating a symlink tree).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now we conditionally compile things in compat/, so we should remove
object files there. Python execution can leave *.pyc and *.pyo, which
need to be cleaned as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also cmd-renames.sh can now be used to remove the backward compatible
symlinks -- this is not used by default in any way.
As discussed on the list with Pasky, git-ssh-push and git-ssh-pull will
keep calling each other for a while longer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Pasky taught me how he does his versioning for ELinks. This will sort
after 0.99.7 and interim fixes 0.99.7a, and before 0.99.8.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Contains the following post-0.99.7b fixes:
- rsh.c string termination fix by H. Peter Anvin
- further fetch fixes by Sergey Vlasov
- diff-tree documentation by Robert Watson.
- 'git diff --cached' synonymous to 'git diff --cached HEAD'.
- subprocess.py licensing status clarification.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Taking the make command line Peter Eriksen uses, give defaults
to SHELL_PATH, TAR, CURLDIR, NO_STRCASESTR, and INSTALL.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Support systems that do not install curl headers and libraries
in /usr/{include,lib}.
Signed-off-by: Patrick Mauritz <oxygene@studentenbude.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Including the current branch in the list of heads being merged
was not a good idea, so drop it. And shorten the message by
grouping branches and tags together to form a single line.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The textual diff generation with built-in '-p' in diff-* brothers has
proven to be useful enough that git-diff-helper outlived its usefulness.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some old scripts might still use git-rev-tree, but it really is
clearly inferior in every way to git-rev-list that such scripts should
be fixed anyway. Fixing them should be pretty easy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
git-export was done as a concept example on how easy it is to export
the git data to something else. It's much less powerful than any
number of trivial one-liner scripts now, and real exporters would not
ever use git-export.
It's obviously much less powerful than "git-whatchanged", or just
about any combination of git-rev-list + git-diff-tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is my ARM assembly SHA1 implementation for GIT. It is approximately
50% faster than the generic C version. On an XScale processor running at
400MHz:
generic C version: 9.8 MB/s
my version: 14.5 MB/s
It's not that I expect a lot of big GIT users on ARM, but I stillknow
about one important ARM user that might benefit from it, and writing
that code was fun.
I also reworked the makefile a bit so any optimized SHA1 implementations
is used regardless of whether NO_OPENSSL is defined or not.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
so people without the latest Python could run merge-recursive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some C libraries lack strcasestr(); add a stupid replacement
to help folks with such.
[jc: original Linus posting, updated with his "also need <ctype.h>",
updated further with a fix from Joachim B Haga <cjhaga@fys.uio.no>"]
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
