| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In sparse_checkout_init(), we first try to load patterns from an
existing file. If we found any, we return immediately, but end up
leaking the patterns we parsed. Fixing this reduces the number of leaks
in t7002 from 9 down to 5.
Note that there are two other exits from the function, but they don't
need the same treatment:
- if we can't resolve HEAD, we write out a hard-coded sparse file and
return. But we know the pattern list is empty there, since we didn't
find any in the on-disk file and we haven't yet added any of our
own.
- otherwise, we do populate the list and then tail-call into
write_patterns_and_update(). But that function frees the
pattern_list itself, so we don't need to.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pattern_list structs used for cone-mode sparse lookups use a few
extra hashmaps. These store pattern_entry structs, each of which has its
own heap-allocated pattern string. When we clean up the hashmaps, we
free the individual pattern_entry structs, but forget to clean up the
embedded strings, causing memory leaks.
We can fix this by iterating over the hashmaps to free the extra
strings. This reduces the numbers of leaks in t7002 from 22 to 9.
One alternative here would be to make the string a FLEX_ARRAY member of
the pattern_entry. Then there's no extra free() required, and as a bonus
it would be a little more efficient. However, some of the refactoring
gets awkward, as we are often assigning strings allocated by helper
functions. So let's just fix the leak for now, and we can explore bigger
refactoring separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The add_pattern() function takes a pattern string, but neither makes a
copy of it nor takes ownership of the memory. So it is the caller's
responsibility to make sure the string hangs around as long as the
pattern_list which references it.
There are a few cases in sparse-checkout where we use string literal
patterns by stuffing them into a strbuf, detaching the buffer, and then
passing the result into add_pattern(). This creates a leak when the
pattern_list is eventually cleared, since we don't retain a copy of the
detached buffer to free.
But we can observe that the whole strbuf dance is unnecessary. The point
was presumably[1] to satisfy the lifetime requirement of the string. But
string literals have static duration; we can count on them lasting for
the whole program.
So we can fix the leak by just passing them directly. And as a bonus,
that simplifies the code. The leaks can be seen in t7002, which drops
from 25 leaks to 22 with this patch. It also makes t3602 and t1090
leak-free.
In the long run, we will also want to clean up this (undocumented!)
memory lifetime requirement of add_pattern(). But that can come in a
later patch; passing the string literals directly will be the right
thing either way.
[1] The code in question comes from 416adc8711 (sparse-checkout: update
working directory in-process for 'init', 2019-11-21) and 99dfa6f970
(sparse-checkout: use in-process update for disable subcommand,
2019-11-21), but I didn't see anything in their commit messages or
on the list explaining the strbufs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use a string list to hold sorted and de-duped patterns, but don't
free it before leaving the function, causing a leak.
This drops the number of leaks found in t7002 from 27 to 25.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git push" notices that the commit at the tip of the ref on
the other side it is about to overwrite does not exist locally, it
used to first try fetching it if the local repository is a partial
clone. The command has been taught not to do so and immediately
fail instead.
* th/push-local-ff-check-without-lazy-fetch:
push: don't fetch commit object when checking existence
|
|
"git init" in an already created directory, when the user
configuration has includeif.onbranch, started to fail recently,
which has been corrected.
* ps/fix-reinit-includeif-onbranch:
setup: fix bug with "includeIf.onbranch" when initializing dir
|
|
* ps/leakfixes:
builtin/mv: fix leaks for submodule gitfile paths
builtin/mv: refactor to use `struct strvec`
builtin/mv duplicate string list memory
builtin/mv: refactor `add_slash()` to always return allocated strings
strvec: add functions to replace and remove strings
submodule: fix leaking memory for submodule entries
commit-reach: fix memory leak in `ahead_behind()`
builtin/credential: clear credential before exit
config: plug various memory leaks
config: clarify memory ownership in `git_config_string()`
builtin/log: stop using globals for format config
builtin/log: stop using globals for log config
convert: refactor code to clarify ownership of check_roundtrip_encoding
diff: refactor code to clarify memory ownership of prefixes
config: clarify memory ownership in `git_config_pathname()`
http: refactor code to clarify memory ownership
checkout: clarify memory ownership in `unique_tracking_name()`
strbuf: fix leak when `appendwholeline()` fails with EOF
transport-helper: fix leaking helper name
|
|
|
|
This adds a trace point in start_command so we can see the full
command invocation without having to resort to strace/code inspection.
For example:
$ GIT_TRACE=1 git test foo
git.c:755 trace: exec: git-test foo
run-command.c:657 trace: run_command: git-test foo
run-command.c:657 trace: run_command: 'echo $*' foo
run-command.c:749 trace: start_command: /bin/sh -c 'echo $* "$@"' 'echo $*' foo
Prior changes have made the documentation around the internals of the
alias command execution clearer, but I have still found this detailed
view of the aliased command being run helpful for debugging purposes.
A test case is added to ensure the full command output is present in
the execution flow.
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing inline shell for shell-expansion aliases (i.e. prefixed
with "!"), there are some caveats around argument parsing to be aware
of. This series of notes attempts to explain what is happening more
clearly.
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use add_patterns() to read .gitignore, .git/info/exclude, etc, as
well as other pattern-like files like sparse-checkout. The parser for
these uses an "int" as an index, meaning that files over 2GB will
generally cause signed integer overflow and out-of-bounds access.
This is unlikely to happen in any real files, but we do read .gitignore
files from the tree. A malicious tree could cause an out-of-bounds read
and segfault (we also write NULs over newlines, so in theory it could be
an out-of-bounds write, too, but as we go char-by-char, the first thing
that happens is trying to read a negative 2GB offset).
We could fix the most obvious issue by replacing one "int" with a
"size_t". But there are tons of "int" sprinkled throughout this code for
things like pattern lengths, number of patterns, and so on. Since nobody
would actually want a 2GB .gitignore file, an easy defensive measure is
to just refuse to parse them.
The "int" in question is in add_patterns_from_buffer(), so we could
catch it there. But by putting the checks in its two callers, we can
produce more useful error messages.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Merge down a handful of topics to adjust tests and CI to make them
work better, without changing Git itself, and a bit of developer
docs update:
* Tests that try to corrupt in-repository files in chunked format did
not work well on macOS due to its broken "mv", which has been
worked around.
* Unbreak CI jobs so that we do not attempt to use Python 2 that has
been removed from the platform.
* Git 2.43 started using the tree of HEAD as the source of attributes
in a bare repository, which has severe performance implications.
For now, revert the change, without ripping out a more explicit
support for the attr.tree configuration variable.
* Windows CI running in GitHub Actions started complaining about the
order of arguments given to calloc(); the imported regex code uses
the wrong order almost consistently, which has been corrected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CI fix.
* jk/ci-macos-gcc13-fix:
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
|
|
Build fix.
* ma/win32-unix-domain-socket:
win32: fix building with NO_UNIX_SOCKETS
|
|
Developer doc update.
* jt/doc-submitting-rerolled-series:
doc: clarify practices for submitting updated patch versions
|
|
The SubmittingPatches document now refers folks to manpages
translation project.
* jc/doc-manpages-l10n:
SubmittingPatches: advertise git-manpages-l10n project a bit
|
|
Windows CI running in GitHub Actions started complaining about the
order of arguments given to calloc(); the imported regex code uses
the wrong order almost consistently, which has been corrected.
* jc/compat-regex-calloc-fix:
compat/regex: fix argument order to calloc(3)
|
|
Git 2.43 started using the tree of HEAD as the source of attributes
in a bare repository, which has severe performance implications.
For now, revert the change, without ripping out a more explicit
support for the attr.tree configuration variable.
* jc/no-default-attr-tree-in-bare:
stop using HEAD for attributes in bare repository by default
|
|
Unbreak CI jobs so that we do not attempt to use Python 2 that has
been removed from the platform.
* ps/ci-python-2-deprecation:
ci: fix Python dependency on Ubuntu 24.04
|
|
Tests that try to corrupt in-repository files in chunked format did
not work well on macOS due to its broken "mv", which has been
worked around.
* jc/test-workaround-broken-mv:
t/lib-chunk: work around broken "mv" on some vintage of macOS
|
|
* jc/git-gui-maintainer-update:
SubmittingPatches: welcome the new maintainer of git-gui part
|
|
Under macOS, `git ls-files path` does not work (gives an error)
if the absolute 'path' contains characters in NFD (decomposed).
This happens when core.precomposeunicode is true, which is the
most common case. The bug report says:
$ cd somewhere # some safe place, /tmp or ~/tmp etc.
$ mkdir $'u\xcc\x88' # ü in NFD
$ cd ü # or cd $'u\xcc\x88' or cd $'\xc3\xbc'
$ git init
$ git ls-files $'/somewhere/u\xcc\x88' # NFD
fatal: /somewhere/ü: '/somewhere/ü' is outside repository at '/somewhere/ü'
$ git ls-files $'/somewhere/\xc3\xbc' # NFC
(the same error as above)
In the 'fatal:' error message, there are three ü;
the 1st and 2nd are in NFC, the 3rd is in NFD.
Add test cases that follows the bug report, with the simplification
that the 'ü' is replaced by an 'ä', which is already used as NFD and
NFC in t3910.
The solution is to add a call to precompose_string_if_needed()
to this code in setup.c :
`work_tree = precompose_string_if_needed(get_git_work_tree());`
There is, however, a limitation with this very usage of Git:
The (repo) local .gitconfig file is not used, only the global
"core.precomposeunicode" is taken into account, if it is set (or not).
To set it to true is a good recommendation anyway, and here is the
analyzes from Jun T :
The problem is the_repository->config->hash_initialized
is set to 1 before the_repository->commondir is set to ".git".
Due to this, .git/config is never read, and precomposed_unicode
is never set to 1 (remains -1).
run_builtin() {
setup_git_directory() {
strbuf_getcwd() { # setup.c:1542
precompose_{strbuf,string}_if_needed() {
# precomposed_unicode is still -1
git_congig_get_bool("core.precomposeunicode") {
git_config_check_init() {
repo_read_config() {
git_config_init() {
# !!!
the_repository->config->hash_initialized=1
# !!!
}
# does not read .git/config since
# the_repository->commondir is still NULL
}
}
}
returns without converting to NFC
}
returns cwd in NFD
}
setup_discovered_git_dir() {
set_git_work_tree(".") {
repo_set_worktree() {
# this function indirectly calls strbuf_getcwd()
# --> precompose_{strbuf,string}_if_needed() -->
# {git,repo}_config_get_bool("core.precomposeunicode"),
# but does not try to read .git/config since
# the_repository->config->hash_initialized
# is already set to 1 above. And it will not read
# .git/config even if hash_initialized is 0
# since the_repository->commondir is still NULL.
the_repository->worktree = NFD
}
}
}
setup_git_env() {
repo_setup_gitdir() {
repo_set_commondir() {
# finally commondir is set here
the_repository->commondir = ".git"
}
}
}
} // END setup_git_directory
Reported-by: Jun T <takimoto-j@kba.biglobe.ne.jp>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/leakfixes:
mv: replace src_dir with a strvec
mv: factor out empty src_dir removal
mv: move src_dir cleanup to end of cmd_mv()
t-strvec: mark variable-arg helper with LAST_ARG_MUST_BE_NULL
t-strvec: use va_end() to match va_start()
|
|
While most of the commands in Git suite are designed to do useful
things in Git repositories, some commands are also usable outside
any repository. Building on top of an earlier work abece6e9 (t1517:
test commands that are designed to be run outside repository,
2024-05-20) that adds tests for such commands, let's give coverage
to some more commands.
This patch covers commands whose code has hits for
$ git grep setup_git_directory_gently
and passes a pointer to nongit_ok variable it uses to allow it to
run outside a Git repository, but mostly they are tested only to see
that they start up (as opposed to dying with "not in a git
repository" complaint). We may want to update them to actually do
something useful later, but this would at least help us catch
regressions by mistake.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/fix-2.45.1-and-friends-for-maint:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fixes/2.45.1/2.44:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fixes/2.45.1/2.43:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fixes/2.45.1/2.42:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fixes/2.45.1/2.41:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* fixes/2.45.1/2.40:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
|
|
* jc/fix-2.45.1-and-friends-for-2.39:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust jc/fix-2.45.1-and-friends-for-2.39 for more recent
maintenance track.
* jc/fix-2.45.1-and-friends-for-maint:
Revert "fsck: warn about symlink pointing inside a gitdir"
Revert "Add a helper function to compare file contents"
clone: drop the protections where hooks aren't run
tests: verify that `clone -c core.hooksPath=/dev/null` works again
Revert "core.hooksPath: add some protection while cloning"
init: use the correct path of the templates directory again
hook: plug a new memory leak
ci: stop installing "gcc-13" for osx-gcc
ci: avoid bare "gcc" for osx-gcc job
ci: drop mention of BREW_INSTALL_PACKAGES variable
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
"git add -p" learned to complain when an answer with more than one
letter is given to a prompt that expects a single letter answer.
* jc/add-patch-enforce-single-letter-input:
add-patch: enforce only one-letter response to prompts
|
|
The strcmp-offset tests have been rewritten using the unit test
framework.
* gt/unit-test-strcmp-offset:
t/: port helper/test-strcmp-offset.c to unit-tests/t-strcmp-offset.c
|
|
The chainlint script (invoked during "make test") did nothing when
it failed to detect the number of available CPUs. It now falls
back to 1 CPU to avoid the problem.
* es/chainlint-ncores-fix:
chainlint.pl: latch CPU count directly reported by /proc/cpuinfo
chainlint.pl: fix incorrect CPU count on Linux SPARC
chainlint.pl: make CPU count computation more robust
|
|
The base topic started to make it an error for a command to leave
the hash algorithm unspecified, which revealed a few commands that
were not ready for the change. Give users a knob to revert back to
the "default is sha-1" behaviour as an escape hatch, and start
fixing these breakages.
* jc/undecided-is-not-necessarily-sha1-fix:
apply: fix uninitialized hash function
builtin/hash-object: fix uninitialized hash function
builtin/patch-id: fix uninitialized hash function
t1517: test commands that are designed to be run outside repository
setup: add an escape hatch for "no more default hash algorithm" change
|
|
The project decision making policy has been documented.
* js/doc-decisions:
doc: describe the project's decision-making process
|
|
Further clean-up the refs subsystem to stop relying on
the_repository, and instead use the repository associated to the
ref_store object.
* ps/refs-without-the-repository-updates:
refs/packed: remove references to `the_hash_algo`
refs/files: remove references to `the_hash_algo`
refs/files: use correct repository
refs: remove `dwim_log()`
refs: drop `git_default_branch_name()`
refs: pass repo when peeling objects
refs: move object peeling into "object.c"
refs: pass ref store when detecting dangling symrefs
refs: convert iteration over replace refs to accept ref store
refs: retrieve worktree ref stores via associated repository
refs: refactor `resolve_gitlink_ref()` to accept a repository
refs: pass repo when retrieving submodule ref store
refs: track ref stores via strmap
refs: implement releasing ref storages
refs: rename `init_db` callback to avoid confusion
refs: adjust names for `init` and `init_db` callbacks
|
|
Code clean-up to make the reftable iterator closer to be reusable.
* ps/reftable-reusable-iterator:
reftable/merged: adapt interface to allow reuse of iterators
reftable/stack: provide convenience functions to create iterators
reftable/reader: adapt interface to allow reuse of iterators
reftable/generic: adapt interface to allow reuse of iterators
reftable/generic: move seeking of records into the iterator
reftable/merged: simplify indices for subiterators
reftable/merged: split up initialization and seeking of records
reftable/reader: set up the reader when initializing table iterator
reftable/reader: inline `reader_seek_internal()`
reftable/reader: separate concerns of table iter and reftable reader
reftable/reader: unify indexed and linear seeking
reftable/reader: avoid copying index iterator
reftable/block: use `size_t` to track restart point index
|
|
The knobs to tweak how reftable files are written have been made
available as configuration variables.
* ps/reftable-write-options:
refs/reftable: allow configuring geometric factor
reftable: make the compaction factor configurable
refs/reftable: allow disabling writing the object index
refs/reftable: allow configuring restart interval
reftable: use `uint16_t` to track restart interval
refs/reftable: allow configuring block size
reftable/dump: support dumping a table's block structure
reftable/writer: improve error when passed an invalid block size
reftable/writer: drop static variable used to initialize strbuf
reftable: pass opts as constant pointer
reftable: consistently refer to `reftable_write_options` as `opts`
|
