| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The calling convention for the merge machinery is
One call to init_merge_options()
One or more calls to merge_incore_[non]recursive()
One call to merge_finalize()
(possibly indirectly via merge_switch_to_result())
Both merge_switch_to_result() and merge_finalize() expect
opt->priv == NULL && result->priv != NULL
which is supposed to be set up by our move_opt_priv_to_result_priv()
function. However, two codepaths dealing with error cases did not
execute this necessary logic, which could result in assertion failures
(or, if assertions were compiled out, could result in segfaults). Fix
the oversight and add a test that would have caught one of these
problems.
While at it, also tighten an existing test for a non-recursive merge
to verify that it fails with appropriate status. Most merge tests in
the testsuite check either for success or conflicts; those testing for
neither are rare and it is good to ensure they support the invariant
assumed by builtin/merge.c in this comment:
/*
* The backend exits with 1 when conflicts are
* left to be resolved, with 2 when it does not
* handle the given merge at all.
*/
So, explicitly check for the exit status of 2 in these cases.
Reported-by: Matt Cree <matt.cree@gearset.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for a subsequent commit which will ensure we do not
forget to maintain our invariants for the priv member in error
codepaths, extract the necessary functionality out into a separate
function. This change is cosmetic at this point, and introduces no
changes beyond an extra assertion sanity check.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing fetch.fsckObjects and transfer.fsckObjects configurations
were not fully applied to bundle-involved fetches, including direct
bundle fetches and bundle-uri enabled fetches. Furthermore, there was no
object verification support for unbundle.
This commit extends object verification support in `bundle.c:unbundle`
by adding the `VERIFY_BUNDLE_FSCK` option to `verify_bundle_flags`. When
this option is enabled, we append the `--fsck-objects` flag to
`git-index-pack`.
The `VERIFY_BUNDLE_FSCK` option is now used by bundle-involved fetches,
where we use `fetch-pack.c:fetch_pack_fsck_objects` to determine whether
to enable this option for `bundle.c:unbundle`, specifically in:
- `transport.c:fetch_refs_from_bundle` for direct bundle fetches.
- `bundle-uri.c:unbundle_from_file` for bundle-uri enabled fetches.
This addition ensures a consistent logic for object verification during
fetches. Tests have been added to confirm functionality in the scenarios
mentioned above.
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, we can use "transfer.fsckObjects" and the more specific
"fetch.fsckObjects" to control checks for broken objects in received
packs during fetches. However, these configurations were only
acknowledged by `fetch-pack.c:get_pack` and did not take effect in
direct bundle fetches or fetches with _bundle-uri_ enabled.
This commit exposes the fetch-then-transfer configuration logic by
adding a new function `fetch_pack_fsck_objects` in fetch-pack.h. This
new function is used to replace the assignment for `fsck_objects` in
`fetch-pack.c:get_pack`. In the next commit, this function will also be
used to extend fsck support for bundle-involved fetches.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using the bundle-uri mechanism with a bundle list containing
multiple interrelated bundles, we encountered a bug where tips from
downloaded bundles were not discovered, thus resulting in rather slow
clones. This was particularly problematic when employing the
"creationTokens" heuristic.
To reproduce this issue, consider a repository with a single branch
"main" pointing to commit "A". Firstly, create a base bundle with:
git bundle create base.bundle main
Then, add a new commit "B" on top of "A", and create an incremental
bundle for "main":
git bundle create incr.bundle A..main
Now, generate a bundle list with the following content:
[bundle]
version = 1
mode = all
heuristic = creationToken
[bundle "base"]
uri = base.bundle
creationToken = 1
[bundle "incr"]
uri = incr.bundle
creationToken = 2
A fresh clone with the bundle list above should result in a reference
"refs/bundles/main" pointing to "B" in the new repository. However, git
would still download everything from the server, as if it had fetched
nothing locally.
So why the "refs/bundles/main" is not discovered? After some digging I
found that:
1. Bundles in bundle list are downloaded to local files via
`bundle-uri.c:download_bundle_list` or via
`bundle-uri.c:fetch_bundles_by_token` for the "creationToken"
heuristic.
2. Each bundle is unbundled via `bundle-uri.c:unbundle_from_file`, which
is called by `bundle-uri.c:unbundle_all_bundles` or called within
`bundle-uri.c:fetch_bundles_by_token` for the "creationToken"
heuristic.
3. To get all prerequisites of the bundle, the bundle header is read
inside `bundle-uri.c:unbundle_from_file` to by calling
`bundle.c:read_bundle_header`.
4. Then it calls `bundle.c:unbundle`, which calls
`bundle.c:verify_bundle` to ensure the repository contains all the
prerequisites.
5. `bundle.c:verify_bundle` calls `parse_object`, which eventually
invokes `packfile.c:prepare_packed_git` or
`packfile.c:reprepare_packed_git`, filling
`raw_object_store->packed_git` and setting `packed_git_initialized`.
6. If `bundle.c:unbundle` succeeds, it writes refs via
`refs.c:refs_update_ref` with `REF_SKIP_OID_VERIFICATION` set. Here
bundle refs which can target arbitrary objects are written to the
repository.
7. Finally, in `fetch-pack.c:do_fetch_pack_v2`, the functions
`fetch-pack.c:mark_complete_and_common_ref` and
`fetch-pack.c:mark_tips` are called with `OBJECT_INFO_QUICK` set to
find local tips for negotiation. The `OBJECT_INFO_QUICK` flag
prevents `packfile.c:reprepare_packed_git` from being called,
resulting in failures to parse OIDs that reside only in the latest
bundle.
In the example above, when unbunding "incr.bundle", "base.pack" is added
to `packed_git` due to prerequisites verification. However, "B" cannot
be found for negotiation because it exists in "incr.pack", which is not
included in `packed_git`.
Fix the bug by removing `REF_SKIP_OID_VERIFICATION` flag when writing
bundle refs. When `refs.c:refs_update_ref` is called to write the
corresponding bundle refs, it triggers `refs.c:ref_transaction_commit`.
This, in turn, invokes `refs.c:ref_transaction_prepare`, which calls
`transaction_prepare` of the refs storage backend. For files backend, it
is `files-backend.c:files_transaction_prepare`, and for reftable
backend, it is `reftable-backend.c:reftable_be_transaction_prepare`.
Both functions eventually call `object.c:parse_object`, which can invoke
`packfile.c:reprepare_packed_git` to refresh `packed_git`. This ensures
that bundle refs point to valid objects and that all tips from bundle
refs are correctly parsed during subsequent negotiations.
A set of negotiation-related tests for cloning with bundle-uri has been
included to demonstrate that downloaded bundles are utilized to
accelerate fetching.
Additionally, another test has been added to show that bundles with
incorrect headers, where refs point to non-existent objects, do not
result in any bundle refs being created in the repository.
Reviewed-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While working on buffering changes to `git cat-file' in a
separate patch, I inadvertently made the output of --batch-check
and the `info' command of --batch-command buffered as if
opt->buffer_output is turned on by default.
Buffering by default breaks some 3rd-party Perl scripts using
cat-file, but this breakage was not detected anywhere in our
test suite. Add a small Perl snippet to test this problem since
(AFAIK) other equivalent ways to test this behavior from Bourne
shell and/or awk would require racy sleeps, non-portable FIFOs
or tedious C code.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Writing the merge state after the index write fails is meaningless and
could potentially cause Git to lose changes.
Signed-off-by: Kyle Zhao <kylezhao@tencent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Building with "-Werror -Wwrite-strings" is now supported.
* ps/no-writable-strings: (27 commits)
config.mak.dev: enable `-Wwrite-strings` warning
builtin/merge: always store allocated strings in `pull_twohead`
builtin/rebase: always store allocated string in `options.strategy`
builtin/rebase: do not assign default backend to non-constant field
imap-send: fix leaking memory in `imap_server_conf`
imap-send: drop global `imap_server_conf` variable
mailmap: always store allocated strings in mailmap blob
revision: always store allocated strings in output encoding
remote-curl: avoid assigning string constant to non-const variable
send-pack: always allocate receive status
parse-options: cast long name for OPTION_ALIAS
http: do not assign string constant to non-const field
compat/win32: fix const-correctness with string constants
pretty: add casts for decoration option pointers
object-file: make `buf` parameter of `index_mem()` a constant
object-file: mark cached object buffers as const
ident: add casts for fallback name and GECOS
entry: refactor how we remove items for delayed checkouts
line-log: always allocate the output prefix
line-log: stop assigning string constant to file parent buffer
...
|
|
A leak in "git imap-send" that somehow escapes LSan has been
plugged.
* jk/imap-send-plug-all-msgs-leak:
imap-send: free all_msgs strbuf in "out" label
|
|
"git am" has a safety feature to prevent it from starting a new
session when there already is a session going. It reliably
triggers when a mbox is given on the command line, but it has to
rely on the tty-ness of the standard input. Add an explicit way to
opt out of this safety with a command line option.
* jk/am-retry:
test-terminal: drop stdin handling
am: add explicit "--retry" option
|
|
Varargs functions that are unannotated as printf-like or execl-like
have been annotated as such.
* jc/varargs-attributes:
__attribute__: add a few missing format attributes
__attribute__: mark some functions with LAST_ARG_MUST_BE_NULL
__attribute__: remove redundant attribute declaration for git_die_config()
__attribute__: trace2_region_enter_printf() is like "printf"
|
|
A new command has been added to migrate a repository that uses the
files backend for its ref storage to use the reftable backend, with
limitations.
* ps/ref-storage-migration:
builtin/refs: new command to migrate ref storage formats
refs: implement logic to migrate between ref storage formats
refs: implement removal of ref storages
worktree: don't store main worktree twice
reftable: inline `merged_table_release()`
refs/files: fix NULL pointer deref when releasing ref store
refs/files: extract function to iterate through root refs
refs/files: refactor `add_pseudoref_and_head_entries()`
refs: allow to skip creation of reflog entries
refs: pass storage format to `ref_store_init()` explicitly
refs: convert ref storage format to an enum
setup: unset ref storage when reinitializing repository version
|
|
"make check-docs" noticed problems and reported to its output but
failed to signal its findings with its exit status, which has been
corrected.
* ps/check-docs-fix:
ci/test-documentation: work around SyntaxWarning in Python 3.12
gitlab-ci: add job to run `make check-docs`
Documentation/lint-manpages: bubble up errors
Makefile: extract script to lint missing/extraneous manpages
|
|
Fix for an embarrassing typo that prevented Python2 tests from running
anywhere.
* ps/ci-fix-detection-of-ubuntu-20:
ci: fix check for Ubuntu 20.04
|
|
Upon expiration event, the credential subsystem forgot to clear
in-core authentication material other than password (whose support
was added recently), which has been corrected.
* ap/credential-clear-fix:
credential: clear expired c->credential, unify secret clearing
|
|
The inter/range-diff output has been moved to the end of the patch
when format-patch adds it to a single patch, instead of writing it
before the patch text, to be consistent with what is done for a
cover letter for a multi-patch series.
* jc/format-patch-with-range-diff:
format-patch: move range/inter diff at the end of a single patch output
show_log: factor out interdiff/range-diff generation
|
|
command_bidi_pipe takes the git command and optional arguments as an
array, not a string. Make sure the documentation example is usable
code.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Memory sanitizer (msan) is detecting a use of an uninitialized variable
(`size`) in `read_attr_from_index`:
==2268==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x5651f3416504 in read_attr_from_index git/attr.c:868:11
#1 0x5651f3415530 in read_attr git/attr.c
#2 0x5651f3413d74 in bootstrap_attr_stack git/attr.c:968:6
#3 0x5651f3413d74 in prepare_attr_stack git/attr.c:1004:2
#4 0x5651f3413d74 in collect_some_attrs git/attr.c:1199:2
#5 0x5651f3413144 in git_check_attr git/attr.c:1345:2
#6 0x5651f34728da in convert_attrs git/convert.c:1320:2
#7 0x5651f3473425 in would_convert_to_git_filter_fd git/convert.c:1373:2
#8 0x5651f357a35e in index_fd git/object-file.c:2630:34
#9 0x5651f357aa15 in index_path git/object-file.c:2657:7
#10 0x5651f35db9d9 in add_to_index git/read-cache.c:766:7
#11 0x5651f35dc170 in add_file_to_index git/read-cache.c:799:9
#12 0x5651f321f9b2 in add_files git/builtin/add.c:346:7
#13 0x5651f321f9b2 in cmd_add git/builtin/add.c:565:18
#14 0x5651f321d327 in run_builtin git/git.c:474:11
#15 0x5651f321bc9e in handle_builtin git/git.c:729:3
#16 0x5651f321a792 in run_argv git/git.c:793:4
#17 0x5651f321a792 in cmd_main git/git.c:928:19
#18 0x5651f33dde1f in main git/common-main.c:62:11
The issue exists because `size` is an output parameter from
`read_blob_data_from_index`, but it's only modified if
`read_blob_data_from_index` returns non-NULL. The read of `size` when
calling `read_attr_from_buf` unconditionally may read from an
uninitialized value. `read_attr_from_buf` checks that `buf` is non-NULL
before reading from `size`, but by then it's already too late: the
uninitialized read will have happened already. Furthermore, there's no
guarantee that the compiler won't reorder things so that it checks
`size` before checking `!buf`.
Make the call to `read_attr_from_buf` conditional on `buf` being
non-NULL, ensuring that `size` is not read if it's never set.
Signed-off-by: Kyle Lippincott <spectral@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After reading the pseudo-merge extension's metadata table, we allocate
an array to store information about each pseudo-merge, including its
byte offset within the .bitmap file itself.
This is done like so:
pseudo_merge_ofs = index_end - 24 -
(index->pseudo_merges.nr * sizeof(uint64_t));
for (i = 0; i < index->pseudo_merges.nr; i++) {
index->pseudo_merges.v[i].at = get_be64(pseudo_merge_ofs);
pseudo_merge_ofs += sizeof(uint64_t);
}
But if the pseudo-merge table is corrupt, we'll keep calling get_be64()
past the end of the pseudo-merge extension, potentially reading off the
end of the mmap'd region.
Prevent this by ensuring that we have at least `table_size - 24` many
bytes available to read (adding 24 to the left-hand side of our
inequality to account for the length of the metadata component).
This is sufficient to prevent us from reading off the end of the
pseudo-merge extension, and ensures that all of the get_be64() calls
below are in bounds.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While investigating a benign Coverity warning on the new pseudo-merge
implementation, I was struggling to understand the (paraphrased) below:
ofs = index_end - 24 - (index->pseudo_merges.nr * sizeof(uint64_t));
for (i = 0; i < index->pseudo_merges.nr; i++) {
index->pseudo_merges.v[i].at = get_be64(ofs);
ofs += sizeof(uint64_t);
}
, in pack-bitmap.c::load_bitmap_header(). Looking at the documentation,
the diagram describing the on-disk format (prior to this patch)
suggested that the optional extended lookup table immediately preceded
the trailing metadata portion.
If that were the case, that would make the above code from
load_bitmap_header() incorrect, as we'd be blindly reading into the
extended offset table.
But later on in the documentation there is a description of the
pseudo-merge position table as immediately preceding the trailing
metadata portion of the extension. And indeed, we do write the position
table in pack-bitmap-write.c:
/* write positions for all pseudo merges */
for (i = 0; i < writer->pseudo_merges_nr; i++)
hashwrite_be64(f, pseudo_merge_ofs[i]);
hashwrite_be32(f, writer->pseudo_merges_nr);
hashwrite_be32(f, kh_size(writer->pseudo_merge_commits));
hashwrite_be64(f, table_start - start);
hashwrite_be64(f, hashfile_total(f) - start + sizeof(uint64_t));
So this is purely a case of the diagram being out of sync with the
textual description and actual implementation of the format
specification.
Add the missing component back to the format diagram to avoid further
confusion in this area.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Guard declarations of functions that implicitly use `the_repository`
with `USE_THE_REPOSITORY_VARIABLE` such that callers don't accidentally
rely on that global variable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "proc-receive" test helper implicitly relies on `the_repository` via
`parse_oid_hex()`. This isn't necessary though, and in fact the whole
command does not depend on `the_repository` at all.
Stop setting up `the_repository` and use `parse_oid_hex_any()` to parse
object IDs.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "oid-array" test helper can supposedly work without a Git
repository, but will in fact crash because `the_repository->hash_algo`
is not initialized. This is because `oid_pos()`, which is used by
`oid_array_lookup()`, depends on `the_hash_algo->rawsz`.
Ideally, we'd adapt `oid_pos()` to not depend on `the_hash_algo`
anymore. That is a bigger untertaking though, so instead we fall back to
SHA1 when there is no repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `object_info()` function of the partial-clone helper is responsible
for checking the object ID of a repository other than `the_repository`.
We use `parse_oid_hex()` in this function though, which means that we
still depend on `the_repository->hash_algo`.
Fix this by using the object hash of the function-local repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The IPC socket used by the fsmonitor on Darwin is usually contained in
the Git repository itself. When the repository is hosted on a networked
filesystem though, we instead create the socket path in the user's home
directory or the socket directory. In that case, we derive the path by
hashing the repository path.
But while we always use SHA1 to hash the repository path, we then end up
using `hash_to_hex()` to append the computed hash to the socket path.
This is wrong because `hash_to_hex()` uses the hash algorithm configured
in `the_repository`, which may not be SHA1. The consequence is that we
may append uninitialized bytes to the path when operating in a SHA256
repository.
Fix this bug by using `hash_to_hex_algop()` with SHA1.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `register_replace_ref()`, we pass in a repository but then use
`get_oid_hex()` to parse passed-in object IDs, which implicitly uses
`the_repository`. Fix this by using the hash algorithm from the
passed-in repository instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `send_info()`, we pass in a repository but then use `get_oid_hex()`
to parse passed-in object IDs, which implicitly uses `the_repository`.
Fix this by using the hash algorithm from the passed-in repository
instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `oidset_parse_file_carefully()` function implicitly depends on
`the_repository` when parsing object IDs. Fix this by having callers
pass in the hash algorithm to use.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-http-fetch(1) command accepts a `--packfile=` option, which
allows the user to specify that it shall fetch a specific packfile,
only. The parameter here is the hash of the packfile, which is specific
to the object hash used by the repository. This requirement is implicit
though via our use of `parse_oid_hex()`, which internally uses
`the_repository`.
The git-http-fetch(1) command allows for there to be no repository
though, which only exists such that we can show usage via the "-h"
option. In that case though, starting with c8aed5e8da (repository: stop
setting SHA1 as the default object hash, 2024-05-07), `the_repository`
does not have its object hash initialized anymore and thus we would
crash when trying to parse the object ID outside of a repository.
Fix this issue by dying immediately when we see a "--packfile="
parameter when outside a Git repository. This is not a functional
regression as we would die later on with the same error anyway.
Add a test to detect the segfault. We use the "nongit" function to do
so, which we need to allow-list in `test_must_fail ()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "hash-ll.h" header was introduced via d1cbe1e6d8 (hash-ll.h: split
out of hash.h to remove dependency on repository.h, 2023-04-22) to make
explicit the split between hash-related functions that rely on the
global `the_repository`, and those that don't. This split is no longer
necessary now that we we have removed the reliance on `the_repository`.
Merge "hash-ll.h" back into "hash.h". This causes some code units to not
include "repository.h" anymore, which requires us to add some forward
declarations.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is an include cycle between "refs.h" and "repository.h" via
"commit.h", "object.h" and "hash.h". This has the effect that several
definitions of structs and enums will not be visible once we merge
"hash-ll.h" back into "hash.h" in the next commit.
The only reason that "repository.h" includes "refs.h" is the definition
of `enum ref_storage_format`. Move it into "repository.h" and have
"refs.h" include "repository.h" instead to fix the cycle.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `empty_tree_oid_hex()` function use `the_repository` to derive the
hash function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
While at it, remove the unused `empty_blob_oid_hex()` function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both functions `is_empty_{blob,tree}_oid()` use `the_repository` to
derive the hash function that shall be used. Require callers to pass in
the hash algorithm to get rid of this implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `is_null_oid()` uses `oideq(oid, null_oid())` to check
whether a given object ID is the all-zero object ID. `null_oid()`
implicitly relies on `the_repository` though to return the correct null
object ID.
Get rid of this dependency by always comparing the complete hash array
for being all-zeroes. This is possible due to the refactoring of object
IDs so that their hash arrays are always fully initialized.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the preceding commit, the hash array of object IDs is now fully
zero-padded even when the hash algorithm's output is smaller than the
array length. With that, we can now adapt both `oidcmp()` and `oideq()`
to unconditionally memcmp(3P) the whole array instead of depending on
the hash size.
While it may feel inefficient to compare unused bytes for e.g. SHA-1, in
practice the compiler should now be able to produce code that is better
optimized both because we have no branch anymore, but also because the
size to compare is now known at compile time. Goldbolt spits out the
following assembly on an x86_64 platform with GCC 14.1 for the old and
new implementations of `oidcmp()`:
oidcmp_old:
movsx rax, DWORD PTR [rdi+32]
test eax, eax
jne .L2
mov rax, QWORD PTR the_repository[rip]
cmp QWORD PTR [rax+16], 32
je .L6
.L4:
mov edx, 20
jmp memcmp
.L2:
lea rdx, [rax+rax*2]
lea rax, [rax+rdx*4]
lea rax, hash_algos[0+rax*8]
cmp QWORD PTR [rax+16], 32
jne .L4
.L6:
mov edx, 32
jmp memcmp
oidcmp_new:
mov edx, 32
jmp memcmp
The new implementation gets ridi of all the branches and effectively
only ends setting up `edx` for `memcmp()` and then calling it.
And for `oideq()`:
oideq_old:
movsx rcx, DWORD PTR [rdi+32]
mov rax, rdi
mov rdx, rsi
test ecx, ecx
jne .L2
mov rcx, QWORD PTR the_repository[rip]
cmp QWORD PTR [rcx+16], 32
mov rcx, QWORD PTR [rax]
je .L12
.L4:
mov rsi, QWORD PTR [rax+8]
xor rcx, QWORD PTR [rdx]
xor rsi, QWORD PTR [rdx+8]
or rcx, rsi
je .L13
.L8:
mov eax, 1
test eax, eax
sete al
movzx eax, al
ret
.L2:
lea rsi, [rcx+rcx*2]
lea rcx, [rcx+rsi*4]
lea rcx, hash_algos[0+rcx*8]
cmp QWORD PTR [rcx+16], 32
mov rcx, QWORD PTR [rax]
jne .L4
.L12:
mov rsi, QWORD PTR [rax+8]
xor rcx, QWORD PTR [rdx]
xor rsi, QWORD PTR [rdx+8]
or rcx, rsi
jne .L8
mov rcx, QWORD PTR [rax+16]
mov rax, QWORD PTR [rax+24]
xor rcx, QWORD PTR [rdx+16]
xor rax, QWORD PTR [rdx+24]
or rcx, rax
jne .L8
xor eax, eax
.L14:
test eax, eax
sete al
movzx eax, al
ret
.L13:
mov edi, DWORD PTR [rdx+16]
cmp DWORD PTR [rax+16], edi
jne .L8
xor eax, eax
jmp .L14
oideq_new:
mov rax, QWORD PTR [rdi]
mov rdx, QWORD PTR [rdi+8]
xor rax, QWORD PTR [rsi]
xor rdx, QWORD PTR [rsi+8]
or rax, rdx
je .L5
.L2:
mov eax, 1
xor eax, 1
ret
.L5:
mov rax, QWORD PTR [rdi+16]
mov rdx, QWORD PTR [rdi+24]
xor rax, QWORD PTR [rsi+16]
xor rdx, QWORD PTR [rsi+24]
or rax, rdx
jne .L2
xor eax, eax
xor eax, 1
ret
Interestingly, the compiler decides to split the comparisons into two so
that it first compares the lower half of the object ID for equality and
then the upper half. If the first check shows a difference, then we
wouldn't even end up comparing the second half.
In both cases, the new generated code is significantly shorter and has
way less branches. While I didn't benchmark the change, I'd be surprised
if the new code was slower.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `oidcmp()` and `oideq()` functions only compare the prefix length as
specified by the given hash algorithm. This mandates that the object IDs
have a valid hash algorithm set, or otherwise we wouldn't be able to
figure out that prefix. As we do not have a hash algorithm in many
cases, for example when handling null object IDs, this assumption cannot
always be fulfilled. We thus have a fallback in place that instead uses
`the_repository` to derive the hash function. This implicit dependency
is hidden away from callers and can be quite surprising, especially in
contexts where there may be no repository.
In theory, we can adapt those functions to always memcmp(3P) the whole
length of their hash arrays. But there exist a couple of sites where we
populate `struct object_id`s such that only the prefix of its hash that
is actually used by the hash algorithm is populated. The remaining bytes
are left uninitialized. The fact that those bytes are uninitialized also
leads to warnings under Valgrind in some places where we copy those
bytes.
Refactor callsites where we populate object IDs to always initialize all
bytes. This also allows us to get rid of `oidcpy_with_padding()`, for
one because the input is now fully initialized, and because `oidcpy()`
will now always copy the whole hash array.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both `oidread()` and `oidclr()` use `the_repository` to derive the hash
function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many of our hash functions have two variants, one receiving a `struct
git_hash_algo` and one that derives it via `the_repository`. Adapt all
of those functions to always require the hash algorithm as input and
drop the variants that do not accept one.
As those functions are now independent of `the_repository`, we can move
them from "hash.h" to "hash-ll.h".
Note that both in this and subsequent commits in this series we always
just pass `the_repository->hash_algo` as input even if it is obvious
that there is a repository in the context that we should be using the
hash from instead. This is done to be on the safe side and not introduce
any regressions. All callsites should eventually be amended to use a
repo passed via parameters, but this is outside the scope of this patch
series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The functions `is_empty_{blob,tree}_sha1()` are mostly unused, except
for a single callsite in "read-cache.c". Most callsites have long since
been converted to use the equivalents that accept a `struct object_id`
instead of a string.
Adapt the remaining callsite and drop those functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the previous commit removed the possibility that a "struct
remote" will ever have zero url fields, we can drop a number of
redundant checks and untriggerable code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we return a struct from remote_get(), the result _almost_ always
has at least one url. In remotes_remote_get_1(), we do this:
if (name_given && !valid_remote(ret))
add_url_alias(remote_state, ret, name);
if (!valid_remote(ret))
return NULL;
So if the remote doesn't have a url, we give it one based on the name
(this is how unconfigured urls are used as remotes). And if that doesn't
work, we return NULL.
But there's a catch: valid_remote() checks that we have at least one url
_unless_ the remote.*.vcs field is set. This comes from c578f51d52 (Add
a config option for remotes to specify a foreign vcs, 2009-11-18), and
the whole idea was to support remote helpers that don't have their own
url.
However, that mode has been broken since 25d5cc488a (Pass unknown
protocols to external protocol handlers, 2009-12-09)! That commit
unconditionally looks at the url in get_helper(), causing a segfault
with something like:
git -c remote.foo.vcs=bar fetch foo
We could fix that now, of course. But given that it has been broken for
almost 15 years and nobody noticed, there's a better option. This weird
"there might not be a url" special case requires checks all over the
code base, and it's not clear if there are other similar segfaults
lurking. It would be nice if we could drop that special case.
So instead, let's let the "the remote name is the url" code kick in. If
you have "remote.foo.vcs", then your url (unless otherwise configured)
is "foo". This does have a visible effect compared to what 25d5cc488a
was trying to do. The idea back then is that for a remote without a url,
we'd run:
# only one command-line option!
git-remote-bar foo
whereas with our default url, now we'll run:
git-remote-bar foo foo
Again, in practice nobody can be relying on this because it has been
segfaulting for 15 years. We should consider just removing this "vcs"
config option entirely, but that would be a user-visible breakage. So by
fixing it this way, we can keep things working that have been working,
and simplify away one special case inside our code.
This fixes the segfault from 25d5cc488a (demonstrated by the test), and
we can build further cleanups on top.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The usual way to trigger a remote helper is to use the "::" syntax from:
87422439d1 (Allow specifying the remote helper in the url, 2009-11-18).
Doing:
git config remote.origin.url hg::https://example.com/repo
will run "git-remote-hg origin https://example.com/repo". Or you can
use the fallback handling from 25d5cc488a (Pass unknown protocols to
external protocol handlers, 2009-12-09):
git config remote.origin.url "foo://bar"
which will run "git-remote-foo origin foo://bar".
But there's a third way, from c578f51d52 (Add a config option for
remotes to specify a foreign vcs, 2009-11-18):
git config remote.origin.vcs foo
git config remote.origin.url bar
which will run "git-remote-foo origin bar". This is mostly redundant
with the other methods, except that it is supposed to allow you to run
without a URL at all. So:
git config remote.origin.vcs foo
would run "git-remote-foo origin" with no extra URL parameter (under the
assumption that the helper somehow knows how to access the remote repo).
However, this mode has been broken since 25d5cc488a, shortly after it
was added! That commit taught the transport code to always look at the
URL string to parse off the "foo::" bits, meaning it would always
segfault in the no-url case. You can see that with:
git -c remote.foo.vcs=bar fetch foo
Nobody seems to have noticed in the almost 15 years since, so presumably
it's not a well-used feature. And without that, arguably the whole
remote.*.vcs feature could be removed entirely, as it isn't offering
anything you couldn't do with the "helper::" syntax. But it _does_ work
if you have a URL, and it has been advertised in the documentation for
all that time. So we shouldn't just remove it without warning.
Likewise, even if we were going to deprecate it, we should avoid
breaking it in the meantime. Since there are no tests for it at all,
let's add a few basic ones:
- this syntax doesn't work well with "git clone" (another point
against it versus "helper::"). But we can use "clone -c" to set up
the config manually, passing the URL as usual to clone. This does
work, though note that I had to use --no-local in the test to avoid
broken interactions between the local code and the helper. In the
real world this would be a non-issue, since the remote URL would
generally not also be a local Git repo!
- likewise, we should be able to set up the config manually and fetch
into a repository. This also works.
- we can simulate a vcs that has no URL support by stuffing the remote
path into another environment variable. This should work, but
doesn't (it hits the segfault mentioned above).
In the first two cases, I took the extra step of checking GIT_TRACE
output to confirm that we actually ran the helper (since the URL is a
valid Git repo, the clone/fetch would appear to work even if we
didn't use the helper at all!).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our tests use a fake helper that just imports from an existing Git
repository. We're fed the path to that repo on the command line, and
derive the GIT_DIR by tacking on "/.git".
This is wrong if the path is a bare repository, but that's OK since this
is just a limited test. But it's also wrong if the transport code feeds
us the actual .git directory itself (i.e., we expect "/path/to/repo" but
it gives us "/path/to/repo/.git"). None of the current tests do that,
but let's future-proof ourselves against adding a test that does.
We can instead ask "rev-parse" to set our GIT_DIR. Note that we have to
first unset other git variables from our environment. Coming into this
script, we'll have GIT_DIR set to the fetching repository, and we need
to "switch" to the remote one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because remote.*.url is treated as a multi-valued key, there is no way
to override previous config. So for example if you have
remote.origin.url set to some wrong value, doing:
git -c remote.origin.url=right fetch
would not work. It would append "right" to the list, which means we'd
still fetch from "wrong" (since subsequent values are used only as push
urls).
Let's provide a mechanism to reset the list, like we do for other
multi-valued keys (e.g., credential.helper, http.extraheaders, and
merge.suppressDest all use this "empty string means reset" pattern).
Reported-by: Mathew George <mathewegeorge@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation for these keys gives a very terse definition and
points you to the fetch/push manpages. But from reading those pages it
was not at all obvious to me that:
- these are keys that can be defined multiple times with meaningful
behavior (especially remote.*.url)
- the way that pushurl overrides url (the git-push page does mention
that "pushurl defaults to url", but it is not immediately clear what
a multi-valued url would do in that situation).
Let's try to summarize the current behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we want to know the push urls for a remote, there is some simple
logic:
- if the user configured any remote.*.pushurl keys, then those make
the complete set of push urls
- otherwise we push to all urls in remote.*.url
Many spots implement this with a level of indirection, assigning to a
local url/url_nr pair. But since both arrays are now strvecs, we can
just use a pointer to select the appropriate strvec, shortening the code
a bit.
Even though this is now a one-liner, since it is application logic that
is present in so many places, it's worth abstracting a helper function.
In fact, we already have such a function, but it's local to
builtin/push.c. So we'll just make it available everywhere via remote.h.
There are two spots to pay special attention to here:
1. in builtin/remote.c's get_url(), we are selecting first based on
push_mode and then falling back to "url" when we're in push_mode
but no pushurl is defined. The updated code makes that much more
clear, compared to the original which had an "else" fall-through.
2. likewise in that file's set_url(), we _only_ respect push_mode,
sine the point is that we are adding to pushurl in that case
(whether it is empty or not). And thus it does not use our helper
function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the url/pushurl fields of "struct remote" own their strings, we
can switch from bare arrays to strvecs. This has a few advantages:
- push/clear are now one-liners
- likewise the free+assigns in alias_all_urls() can use
strvec_replace()
- we now use size_t for storage, avoiding possible overflow
- this will enable some further cleanups in future patches
There's quite a bit of fallout in the code that reads these fields, as
it tends to access these arrays directly. But it's mostly a mechanical
replacement of "url_nr" with "url.nr", and "url[i]" with "url.v[i]",
with a few variations (e.g. "*url" could become "*url.v", but I used
"url.v[0]" for consistency).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
