| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We've had "FIXME!!! Collision check here ?" in finalize_object_file()
since aac1794132 (Improve sha1 object file writing., 2005-05-03). That
is, when we try to write a file with the same name, we assume the
on-disk contents are the same and blindly throw away the new copy.
One of the reasons we never implemented this is because the files it
moves are all named after the cryptographic hash of their contents
(either loose objects, or packs which have their hash in the name these
days). So we are unlikely to see such a collision by accident. And even
though there are weaknesses in sha1, we assume they are mitigated by our
use of sha1dc.
So while it's a theoretical concern now, it hasn't been a priority.
However, if we start using weaker hashes for pack checksums and names,
this will become a practical concern. So in preparation, let's actually
implement a byte-for-byte collision check.
The new check will cause the write of new differing content to be a
failure, rather than a silent noop, and we'll retain the temporary file
on disk. If there's no collision present, we'll clean up the temporary
file as usual after either rename()-ing or link()-ing it into place.
Note that this may cause some extra computation when the files are in
fact identical, but this should happen rarely.
Loose objects are exempt from this check, and the collision check may be
skipped by calling the _flags variant of this function with the
FOF_SKIP_COLLISION_CHECK bit set. This is done for a couple of reasons:
- We don't treat the hash of the loose object file's contents as a
checksum, since the same loose object can be stored using different
bytes on disk (e.g., when adjusting core.compression, using a
different version of zlib, etc.).
This is fundamentally different from cases where
finalize_object_file() is operating over a file which uses the hash
value as a checksum of the contents. In other words, a pair of
identical loose objects can be stored using different bytes on disk,
and that should not be treated as a collision.
- We already use the path of the loose object as its hash value /
object name, so checking for collisions at the content level doesn't
add anything.
Adding a content-level collision check would have to happen at a
higher level than in finalize_object_file(), since (avoiding race
conditions) writing an object loose which already exists in the
repository will prevent us from even reaching finalize_object_file()
via the object freshening code.
There is a collision check in index-pack via its `check_collision()`
function, but there isn't an analogous function in unpack-objects,
which just feeds the result to write_object_file().
So skipping the collision check here does not change for better or
worse the hardness of loose object writes.
As a small note related to the latter bullet point above, we must teach
the tmp-objdir routines to similarly skip the content-level collision
checks when calling migrate_one() on a loose object file, which we do by
setting the FOF_SKIP_COLLISION_CHECK bit when we are inside of a loose
object shard.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As soon as we've tried to link() a temporary object into place, we then
unlink() the tempfile immediately, whether we were successful or not.
For the success case, this is because we no longer need the old file
(it's now linked into place).
For the error case, there are two outcomes. Either we got EEXIST, in
which case we consider the collision to be a noop. Or we got a system
error, in which we case we are just cleaning up after ourselves.
Using a single line for all of these cases has some problems:
- in the error case, our unlink() may clobber errno, which we use in
the error message
- for the collision case, there's a FIXME that indicates we should do
a collision check. In preparation for implementing that, we'll need
to actually hold on to the file.
Split these three cases into their own calls to unlink_or_warn(). This
is more verbose, but lets us do the right thing in each case.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We prefer link()/unlink() to rename() for object files, with the idea
that we should prefer the data that is already on disk to what is
incoming. But we may fall back to rename() if the user has configured us
to do so, or if the filesystem seems not to support cross-directory
links. This loses the "prefer what is on disk" property.
We can mitigate this somewhat by trying to stat() the destination
filename before doing the rename. This is racy, since the object could
be created between the stat() and rename() calls. But in practice it is
expanding the definition of "what is already on disk" to be the point
that the function is called. That is enough to deal with any potential
attacks where an attacker is trying to collide hashes with what's
already in the repository.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When merging file pairs after they have been broken up we queue a new
file pair and discard the broken-up ones. The newly-queued file pair
reuses one filespec of the broken up pairs each, where the respective
other filespec gets discarded. But we only end up freeing the filespec's
data, not the filespec itself, and thus leak memory.
Fix these leaks by using `free_filespec()` instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When simplifying commits, e.g. because they are treesame with their
parents, we unset the commit's parent pointers but never free them. Plug
the resulting memory leaks.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `get_schedule_cmd()` function allows us to override the schedule
command with a specific test command such that we can verify the
underlying logic in a platform-independent way. Its memory management is
somewhat wild though, because it basically gives up and assigns an
allocated string to the string constant output pointer. While this part
is marked with `UNLEAK()` to mask this, we also leak the local string
lists.
Rework the function such that it has a separate out parameter. If set,
we will assign it the final allocated command. Plug the other memory
leaks and create a common exit path.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parsing the maintenance strategy from config we allocate a config
string, but do not free it after parsing it. Plug this leak by instead
using `git_config_get_string_tmp()`, which does not allocate any memory.
This leak is exposed by t7900, but plugging it alone does not make the
test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The partial clone filter of a promisor remote is never free'd, causing
memory leaks. Furthermore, in case multiple partial clone filters are
defined for the same remote, we'd overwrite previous values without
freeing them.
Fix these leaks.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating a pattern via `create_grep_pat()` we allocate the pattern
member of the structure regardless of the token type. But later, when we
try to free the structure, we free the pattern member conditionally on
the token type and thus leak memory.
Plug this leak. The leak is exposed by t7814, but plugging it alone does
not make the whole test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `add_submodule_odb_by_path()` we add a path into a global string
list. The list is initialized with `NODUP`, which means that we do not
pass ownership of strings to the list. But we use `xstrdup()` when we
insert a path, with the consequence that the string will never get
free'd.
Plug the leak by marking the list as `DUP`. There is only a single
callsite where we insert paths anyway, and as explained above that
callsite was mishandling the allocation.
This leak is exposed by t7814, but plugging it does not make the whole
test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each thread may have a specific context in the trace2 subsystem that we
set up via thread-local storage. We do not set up a destructor for this
data though, which means that the context data will leak.
Plug this leak by installing a destructor. This leak is exposed by
t7814, but plugging it alone does not make the whole test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are several leaking data structures in git-difftool(1). Plug them.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When repacking, we assemble git-pack-objects(1) arguments both for the
"normal" pack and for the cruft pack. This configuration gets populated
with a bunch of `OPT_PASSTHRU` options that we end up passing to the
child process. These options are allocated, but never free'd.
Create a new `pack_objects_args_release()` function that releases the
memory for us and call it for both sets of options.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `prepare_order()` we parse an orderfile and assign it to a global
array. In order to save on some allocations, we replace newlines with
NUL characters and then assign pointers into the allocated buffer to
that array. This can cause the buffer to be completely unreferenced
though in some cases, e.g. because the order file is empty or because we
had to use `xmemdupz()` to copy the lines instead of NUL-terminating
them.
Refactor the code to always `xmemdupz()` the strings. This is a bit
simpler, and it is rather unlikely that saving a handful of allocations
really matters. This allows us to release the string buffer and thus
plug the memory leak.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `OPTION_FILENAME` option always assigns either an allocated string
or `NULL` to the value. In case it is passed multiple times it does not
know to free the previous value though, which causes a memory leak.
Refactor the function to always free the previous value. None of the
sites where this option is used pass a string constant, so this change
is safe.
While at it, fix the argument of `fix_filename()` to be a string
constant. The only reason why it's not is because we use it as an
in-out-parameter, where the input is a constant and the output is not.
This is weird and unnecessary, as we can just return the result instead
of using the parameter for this.
This leak is being hit in t7621, but plugging it alone does not make the
test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `orderfile` diff option is being assigned via `OPT_FILENAME()`,
which assigns an allocated string to the variable. We never free it
though, causing a memory leak.
Change the type of the string to `char *` and free it to plug the leak.
This also requires us to use `xstrdup()` to assign the global config to
it in case it is set.
This leak is being hit in t7621, but plugging it alone does not make the
test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `opt_ff` field gets populated either via `OPT_PASSTHRU` via
`config_get_ff()` or when `--rebase` is passed. So we sometimes end up
overriding the value in `opt_ff` with another value, but we do not free
the old value, causing a memory leak.
Adapt the type of the variable to be `char *` and consistently assign
allocated strings to it such that we can easily free it when it is being
overridden.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `treat_directory()` we perform some logic to handle ignored and
untracked entries. When populating a directory with entries we first
save the current number of ignored/untracked entries and then populate
new entries at the end of our arrays that keep track of those entries.
When we figure out that all entries have been ignored/are untracked we
then remove this tail of entries from those vectors again. But there is
an off by one error in both paths that causes us to not free the first
ignored and untracked entries, respectively.
Fix these off-by-one errors to plug the resulting leak. While at it,
massage the code a bit to match our modern code style.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `update_submodule()` fails we return with `die_message()`, which
only causes us to print the same message as `die()` would without
actually causing the process to die. We don't free memory in that case
and thus leak memory.
Fix the leak by freeing the remote ref.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the "submodule-nested-repo-config" helper we create a submodule
repository and print its configuration. We do not clear the repo,
causing a memory leak. Plug it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix leaking error buffer when `compute_alternate_path()` fails.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `runcommand_in_submodule_cb()` we may end up not executing the child
command when `argv` is empty. But we still populate the command with
environment variables and other things, which needs cleanup. This leads
to a memory leak because we do not call `finish_command()`.
Fix this by clearing the child process when we don't execute it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're not freeing the submodule update strategy command. Provide a
helper function that does this for us and call it in
`update_data_release()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `handle_builtin()` we may end up creating an ad-hoc argv array in
case we see that the command line contains the "--help" parameter. In
this case we observe two memory leaks though:
- We leak the `struct strvec` itself because we directly exit after
calling `run_builtin()`, without bothering about any cleanups.
- Even if we free'd that vector we'd end up leaking some of its
strings because `run_builtin()` will modify the array.
Plug both of these leaks.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `html_path` variable gets populated via `git_help_config()`, which
puts an allocated string into it if its value has been configured. We do
not clear the old value though, which causes a memory leak in case the
config exists multiple times.
Plug this leak. The leak is exposed by t0012, but plugging it alone is
not sufficient to make the test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `get_html_page_path()` we may end up assigning the return value of
`system_path()` to the global `html_path` variable. But as we also
assign the returned value to `to_free`, we will deallocate its memory
upon returning from the function. Consequently, `html_path` will now
point to deallocated memory.
Fix this issue by instead assigning the value to a separate local
variable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a patch series happened to look interesting to the maintainer
but is not ready for 'next', it is applied on a topic branch and
merged to the 'seen' branch to keep an eye on it. In an ideal
world, the participants give reviews and the original author
responds to the reviews, and such iterations may produce newer
versions of the patch series, and at some point, a concensus is
formed that the latest round is good enough for 'next'. Then the
topic is merged to 'next' for inclusion in a future release.
In a much less ideal world we live in, however, a topic sometimes
get stalled. The original author may not respond to hanging review
comments, may promise an update will be sent but does not manage to
do so, nobody talks about the topic on the list and nobody builds
upon it, etc.
Following the recent trend to document and give more transparency to
the decision making process, let's set a deadline to keep a topic
still alive, and actively discard those that are inactive for a long
period of time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* jk/sendemail-mailmap-doc:
send-email: document --mailmap and associated configuration
|
|
"git diff --exit-code" ignored modified binary files, which has
been corrected.
* rs/diff-exit-code-binary:
diff: report modified binary files as changes in builtin_diff()
|
|
CI updates.
* cb/ci-freebsd-13-4:
ci: update FreeBSD image to 13.4
|
|
Docfix.
* ak/doc-sparse-co-typofix:
Documentation/technical: fix a typo
|
|
Typofix.
* ak/typofix-builtins:
builtin: fix typos
|
|
This pretty much should match what we would have in the upcoming
preview of 2.47.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CMake adjustments for recent changes around unit tests.
* jc/cmake-unit-test-updates:
cmake: generalize the handling of the `UNIT_TEST_OBJS` list
cmake: stop looking for `REFTABLE_TEST_OBJS` in the Makefile
cmake: rename clar-related variables to avoid confusion
|
|
CI updates.
* ps/ci-gitlab-upgrade:
gitlab-ci: upgrade machine type of Linux runners
|
|
Typofix.
* ak/refs-symref-referent-typofix:
ref-filter: fix a typo
|
|
Typofix.
* ak/typofix-2.46-maint:
upload-pack: fix a typo
sideband: fix a typo
setup: fix a typo
run-command: fix a typo
revision: fix a typo
refs: fix typos
rebase: fix a typo
read-cache-ll: fix a typo
pretty: fix a typo
object-file: fix a typo
merge-ort: fix typos
merge-ll: fix a typo
http: fix a typo
gpg-interface: fix a typo
git-p4: fix typos
git-instaweb: fix a typo
fsmonitor-settings: fix a typo
diffcore-rename: fix typos
config.mak.dev: fix a typo
|
|
The reftable backend learned to more efficiently handle exclude
patterns while enumerating the refs.
* ps/reftable-exclude:
refs/reftable: wire up support for exclude patterns
reftable/reader: make table iterator reseekable
t/unit-tests: introduce reftable library
Makefile: stop listing test library objects twice
builtin/receive-pack: fix exclude patterns when announcing refs
refs: properly apply exclude patterns to namespaced refs
|
|
"git apply" had custom buffer management code that predated before
use of strbuf got widespread, which has been updated to use strbuf,
which also plugged some memory leaks.
* ps/apply-leakfix:
apply: refactor `struct image` to use a `struct strbuf`
apply: rename members that track line count and allocation length
apply: refactor code to drop `line_allocated`
apply: introduce macro and function to init images
apply: rename functions operating on `struct image`
apply: reorder functions to move image-related things together
|
|
We allocate a list of ref structs from get_local_heads() but never clean
it up. We should do so before exiting to avoid complaints from the
leak-checker. Note that we have to initialize it to NULL, because
there's one code path that can jump to the cleanup label before we
assign to it.
Fixing this lets us mark t5540 as leak-free.
Curiously building with SANITIZE=leak and gcc does not seem to find this
problem, but switching to clang does. It seems like a fairly obvious
leak, though.
I was curious that the matching remote_refs did not have the same leak.
But that is because we store the list in a global variable, so it's
still reachable after we exit. Arguably we could treat it the same as
future-proofing, but I didn't bother (now that the script is marked
leak-free, anybody moving it to a stack variable will notice).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In http-push's finish_request(), if we fail a loose object request we
may fall back to trying a packed request. But if we do so, we leave the
http_loose_object_request in place, leaking it.
We can fix this by always cleaning it up. Note that the obj_req pointer
here (which we'll set to NULL) is a copy of the request->userData
pointer, which will now point to freed memory. But that's OK. We'll
either release the parent request struct entirely, or we'll convert it
into a packed request, which will overwrite userData itself.
This leak is found by t5540, but it's not quite leak-free yet.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In http-push's get_delta(), we generate a list of pending objects by
recursively processing trees and blobs, adding them to a linked list.
And then we iterate over the list, adding a new request for each
element.
But since we iterate using the list head pointer, at the end it is NULL
and all of the actual list structs have been leaked.
We can fix this either by using a separate iterator and then calling
object_list_free(), or by just freeing as we go. I picked the latter,
just because it means we continue to shrink the list as we go, though
I'm not sure it matters in practice (we call add_send_request() in the
loop, but I don't think it ever looks at the global objects list
itself).
This fixes several leaks noticed in t5540.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we ask libexpat to parse XML data, we sometimes set xml_cdata as a
CharacterDataHandler callback. This fills in an allocated string in the
xml_ctx struct which we never free, causing a leak.
I won't pretend to understand the purpose of the field, but it looks
like it is used by other callbacks during the parse. At any rate, we
never look at it again after XML_Parse() returns, so we should be OK to
free() it then.
This fixes several leaks triggered by t5540.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The remote_ls_ctx struct has dentry_name string, which is filled in with
a heap allocation in the handle_remote_ls_ctx() XML callback. After the
XML parse is done in remote_ls(), we should free the string to avoid a
leak.
This fixes several leaks found by running t5540.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we issue a PUT, we initialize and fill a strbuf embedded in the
transfer_request struct. But we never release this buffer, causing a
leak.
We can fix this by adding a strbuf_release() call to release_request().
If we stopped there, then non-PUT requests would try to release a
zero-initialized strbuf. This works OK in practice, but we should try to
follow the strbuf API more closely. So instead, we'll always initialize
the strbuf when we create the transfer_request struct.
That in turn means switching the strbuf_init() call in start_put() to a
simple strbuf_grow().
This leak is triggered in t5540.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we issue a PUT request, we store the destination in the "dest"
field by detaching from a strbuf. But we never free the result, causing
a leak.
We can address this in the release_request() function. But note that we
also need to initialize it to NULL, as most other request types do not
set it at all.
Curiously there are _two_ functions to initialize a transfer_request
struct. Adding the initialization only to add_fetch_request() seems to
be enough for t5540, but I won't pretend to understand why. Rather than
just adding "request->dest = NULL" in both spots, let's zero the whole
struct. That addresses this problem, as well as any future ones (and it
can't possibly hurt, as by definition we'd be hitting uninitialized
memory previously).
This fixes several leaks noticed by t5540.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To pass headers to curl, we have to allocate a curl_slist linked list
and then feed it to curl_easy_setopt(). But the header list is not
copied by curl, and must remain valid until we are finished with the
request.
A few spots in http-push get this right, freeing the list after
finishing the request, but many do not. In most cases the fix is simple:
we set up the curl slot, start it, and then use run_active_slot() to
take it to completion. After that, we don't need the headers anymore and
can call curl_slist_free_all().
But one case is trickier: when we do a MOVE request, we start the
request but don't immediately finish it. It's possible we could change
this to be more like the other requests, but I didn't want to get into
risky refactoring of this code. So we need to stick the header list into
the request struct and remember to free it later.
Curiously, the struct already has a headers field for this purpose! It
goes all the way back to 58e60dd203 (Add support for pushing to a remote
repository using HTTP/DAV, 2005-11-02), but it doesn't look like it was
ever used. We can make use of it just by assigning our headers to it,
and there is already code in finish_request() to clean it up.
This fixes several leaks triggered by t5540.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our repo->url string comes from str_end_url_with_slash(), which always
allocates its output buffer. We should free it before exiting to avoid
triggering the leak-checker.
This can be seen by leak-checking t5540.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We parse the command-line arguments into a refspec struct, but we never
free them. We should do so before exiting to avoid triggering the
leak-checker.
This triggers in t5540 many times (basically every invocation of
http-push).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
