| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We explicitly avoid saying "ref <src>" when introducing the source
side of a refspec, because it can be a fully-spelled hexadecimal
object name, and it also can be a pattern that is not quite a "ref".
But we are loose when we introduce <dst> and say "ref <dst>", even
though it can also be a pattern. Let's omit "ref" also from the
destination side.
Clarify that <src> can be a ref, a (limited glob) pattern, or an
object name.
Even though the very original design of refspec expected that '*'
was used only at the end (e.g., "refs/heads/*" was expected, but not
"refs/heads/*-wip"), the code and its use evolved to handle a single
'*' anywhere in the pattern. Update the text to remove the mention
of "the same prefix". Anything that matches the pattern are named
by such a (limited glob) pattern in <src>.
Also put a bit more stress on the fact that we accept only one '*'
in the pattern by saying "one and only one `*`".
Helped-by: Monika Kairaitytė <monika@kibit.lt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test script uses "test - [def]", but when a test fails because
the file passed to it does not exist,
it fails silently without an error message.
Use test_path_* helper functions, which are designed to give better
error messages when their expectations are not met.
I have added a mechanical validation that applies the same transformation
done in this patch, when the test script is passed to a sed script as shown
below.
sed -e 's/^\( *\)test -f /\1test_path_is_file /' \
-e 's/^\( *\)test -d /\1test_path_is_dir /' \
-e 's/^\( *\)test -e /\1test_path_exists /' \
-e 's/^\( *\)! test -[edf] /\1test_path_is_missing /' \
-e 's/^\( *\)test ! -[edf] /\1test_path_is_missing /' \
"$1" >foo.sh
Reviewers can use the sed script to tranform the original test script and
compare the result in foo.sh with the results of applying the patch.
You will see an instance of "!(test -e 3)" which was manually replaced with
""test_path_is_missing 3", and everything else should match.
Careful and deliberate observation was done to check instances where
"test ! - [df] foo" was used in the test script to make sure that the test
instances were expecting foo to EITHER be a file or a directory, and NOT a
possibility of being both as this would make replacing "test ! -f foo" with
"test_path_is_missing foo" unreasonable.
In the tests control flow, foo has been created as EITHER a
reguar file OR a directory and should NOT exist
after "git clean" or "git clean -d", as the case maybe, has been called.
This made it reasonable to replace
"test ! -[df] foo" with "test_path_is_missing foo".
Signed-off-by: Abraham Samuel Adekunle <abrahamadekunle50@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `loose.c`, we rely on the global variable `the_hash_algo`. As such we
have guarded the file with the 'USE_THE_REPOSITORY_VARIABLE' definition.
Let's derive the hash algorithm from the available repository variable
and remove this guard. This brings us one step closer to removing the
global 'the_repository' variable.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add jobs that exercise Git on Windows. Unfortunately, building and
especially testing Git on Windows is inherently slower compared to other
Unix-like systems, mostly because spawning processes is way slower. We
thus use the same layout as we use in GitHub Actions, where we have one
build job, and then pass on the resulting build artifacts to ten test
jobs that split up the work across each other.
Unfortunately, the GitLab runners for Windows machines are embarassingly
slow by themselves. So while this strategy leads to around 20 minutes of
build time in GitHub Actions, the same pipeline takes around an hour in
GitLab CI. Still, having late coverage is certainly better than having
none at all.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're about to add a couple of jobs for Windows. As the Windows runners
are quite slow, we will split those up across two stages: one stage to
build the artifacts, and one stage that runs test slices in parallel.
Introduce stages and "needs" dependencies for the preexisting jobs as a
preparatory step. The stages will lead to a more natural representation
of jobs in the UI, whereas the "needs" dependency ensures that jobs do
not have to wait for all jobs in the preceding stage to finish.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We try to abstract away any differences between different CI platforms
in "ci/lib.sh", such that knowledge specific to e.g. GitHub Actions or
GitLab CI is neatly encapsulated in a single place. Next to some generic
variables, we also set up some variables that are specific to the actual
platform that the CI operates on, e.g. Linux or macOS.
We do not yet support Windows runners on GitLab CI. Unfortunately, those
systems do not use the same "CI_JOB_IMAGE" environment variable as both
Linux and macOS do. Instead, we can use the "OS" variable, which should
have a value of "Windows_NT" on Windows platforms.
Handle the combination of "$OS,$CI_JOB_IMAGE" and introduce support for
Windows.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to build and test Git, we have to first set up the Git for
Windows SDK, which contains various required tools and libraries. The
SDK is basically a clone of [1], but that repository is quite large due
to all the binaries it contains. We thus use both shallow clones and
sparse checkouts to speed up the setup. To handle this complexity we use
a GitHub action that is hosted externally at [2].
Unfortunately, this makes it rather hard to reuse the logic for CI
platforms other than GitHub Actions. After chatting with Johannes
Schindelin we came to the conclusion that it would be nice if the Git
for Windows SDK would regularly publish releases that one can easily
download and extract, thus moving all of the complexity into that single
step. Like this, all that a CI job needs to do is to fetch and extract
the resulting archive. This published release comes in the form of a new
"ci-artifacts" tag that gets updated regularly [3].
Implement a new script that knows how to fetch and extract that script
and convert GitHub Actions to use it.
[1]: https://github.com/git-for-windows/git-sdk-64/
[2]: https://github.com/git-for-windows/setup-git-for-windows-sdk/
[3]: https://github.com/git-for-windows/git-sdk-64/releases/tag/ci-artifacts/
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Windows by default has a restriction in place to only allow paths up to
260 characters. This restriction can nowadays be lifted by setting a
registry key, but is still active by default.
In t7300 we have one test that exercises the behaviour of git-clean(1)
with such long paths. Interestingly enough, this test fails on my system
that uses Windows 10 with mingw-w64 installed via MSYS2: instead of
observing ENAMETOOLONG, we observe ENOENT. This behaviour is consistent
across multiple different environments I have tried.
I cannot say why exactly we observe a different error here, but I would
not be surprised if this was either dependent on the Windows version,
the version of MinGW, the current working directory of Git or any kind
of combination of these.
Work around the issue by handling both errors.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When interactively rebasing merge commits, the commit message is parsed to
extract a probably meaningful label name. For instance if the merge commit
is “Merge branch 'feature0'”, then the rebase script will have thes lines:
```
label feature0
merge -C $sha feature0 # “Merge branch 'feature0'
```
This heuristic fails in the case of octopus merges or when the merge commit
message is actually unrelated to the parent commits.
An example that combines both is:
```
*---. 967bfa4 (HEAD -> integration) Integration
|\ \ \
| | | * 2135be1 (feature2, feat2) Feature 2
| |_|/
|/| |
| | * c88b01a Feature 1
| |/
|/|
| * 75f3139 (feat0) Feature 0
|/
* 25c86d0 (main) Initial commit
```
yields the labels Integration, Integration-2 and Integration-3.
Fix this by using a branch name for each merge commit's parent that is the
tip of at least one branch, and falling back to a label derived from the
merge commit message otherwise.
In the example above, the labels become feat0, Integration and feature2.
Signed-off-by: Nicolas Guichard <nicolas@guichard.eu>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extract load_branch_decorations from todo_list_add_update_ref_commands so
it can be re-used in make_script_with_merges.
Since it can now be called multiple times, use non-static lists and place
it next to load_ref_decorations to re-use the decoration_loaded guard.
Signed-off-by: Nicolas Guichard <nicolas@guichard.eu>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
load_branch_decorations calls normalize_glob_ref on each string of filter's
string_lists. This effectively replaces the potentially non-owning char* of
those items with an owning char*.
Set the strdup_string flag on those string_lists.
This was not caught until now because:
- when passing string_lists already with the strdup_string already set, the
behaviour was correct
- when passing static string_lists, the new char* remain reachable until
program exit
Signed-off-by: Nicolas Guichard <nicolas@guichard.eu>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code fetches the submodules remote based on the superproject remote name
instead of the submodule remote name[1].
Instead of grabbing the default remote of the superproject repository, ask
the default remote of the submodule we are going to run 'git fetch' in.
1. https://lore.kernel.org/git/ZJR5SPDj4Wt_gmRO@pweza/
Signed-off-by: Daniel Black <daniel@mariadb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
• Provide a commit message in the example command.
The command will hang since it is waiting for a commit message on
stdin. Which is usable but not straightforward enough since this is
example code.
• Use `||` directly since that is more straightforward than checking the
last exit status.
Also use `echo` and `exit` since `die` is not defined.
• Expose variable declarations.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The synopsis for `git config unset` mentions two positional arguments:
`<name>` and `<value>`. While the first argument is correct, the second
is not. Users are expected to provide the value via `--value=<value>`.
Remove the positional argument. The `--value=<value>` option is already
documented correctly, so this is all we need to do to fix the
documentation.
Signed-off-by: Josh Heinrichs <joshiheinrichs@gmail.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's a racy hang in fsmonitor on macOS that we sometimes see in CI.
When we serve a client, what's supposed to happen is:
1. The client thread calls with_lock__wait_for_cookie() in which we
create a cookie file and then wait for a pthread_cond event
2. The filesystem event listener sees the cookie file creation, does
some internal book-keeping, and then triggers the pthread_cond.
But there's a problem: we start the listener that accepts client threads
before we start the fs event thread. So it's possible for us to accept a
client which creates the cookie file and starts waiting before the fs
event thread is initialized, and we miss those filesystem events
entirely. That leaves the client thread hanging forever.
In CI, the symptom is that t9210 (which is testing scalar, which always
enables fsmonitor under the hood) may hang forever in "scalar clone". It
is waiting on "git fetch" which is waiting on the fsmonitor daemon.
The race happens more frequently under load, but you can trigger it
predictably with a sleep like this, which delays the start of the fs
event thread:
--- a/compat/fsmonitor/fsm-listen-darwin.c
+++ b/compat/fsmonitor/fsm-listen-darwin.c
@@ -510,6 +510,7 @@ void fsm_listen__loop(struct fsmonitor_daemon_state *state)
FSEventStreamSetDispatchQueue(data->stream, data->dq);
data->stream_scheduled = 1;
+ sleep(1);
if (!FSEventStreamStart(data->stream)) {
error(_("Failed to start the FSEventStream"));
goto force_error_stop_without_loop;
One solution might be to reverse the order of initialization: start the
fs event thread before we start the thread listening for clients. But
the fsmonitor code explicitly does it in the opposite direction. The fs
event thread wants to refer to the ipc_server_data struct, so we need it
to be initialized first.
A further complication is that we need a signal from the fs event thread
that it is actually ready and listening. And those details happen within
backend-specific fsmonitor code, whereas the initialization is in the
shared code.
So instead, let's use the ipc_server init/start split added in the
previous commit. The generic fsmonitor code will init the ipc_server but
_not_ start it, leaving that to the backend specific code, which now
needs to call ipc_server_start_async() at the right time.
For macOS, that is right after we start the FSEventStream that you can
see in the diff above.
It's not clear to me if Windows suffers from the same problem (and we
simply don't trigger it in CI), or if it is immune. Regardless, the
obvious place to start accepting clients there is right after we've
established the ReadDirectoryChanges watch.
This makes the hangs go away in our macOS CI environment, even when
compiled with the sleep() above.
Helped-by: Koji Nakamaru <koji.nakamaru@gree.net>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Koji Nakamaru <koji.nakamaru@gree.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To start an async ipc server, you call ipc_server_run_async(). That
initializes the ipc_server_data object, and starts all of the threads
running, which may immediately start serving clients.
This can create some awkward timing problems, though. In the fsmonitor
daemon (the sole user of the simple-ipc system), we want to create the
ipc server early in the process, which means we may start serving
clients before the rest of the daemon is fully initialized.
To solve this, let's break run_async() into two parts: an initialization
which allocates all data and spawns the threads (without letting them
run), and a start function which actually lets them begin work. Since we
have two simple-ipc implementations, we have to handle this twice:
- in ipc-unix-socket.c, we have a central listener thread which hands
connections off to worker threads using a work_available mutex. We
can hold that mutex after init, and release it when we're ready to
start.
We do need an extra "started" flag so that we know whether the main
thread is holding the mutex or not (e.g., if we prematurely stop the
server, we want to make sure all of the worker threads are released
to hear about the shutdown).
- in ipc-win32.c, we don't have a central mutex. So we'll introduce a
new startup_barrier mutex, which we'll similarly hold until we're
ready to let the threads proceed.
We again need a "started" flag here to make sure that we release the
barrier mutex when shutting down, so that the sub-threads can
proceed to the finish.
I've renamed the run_async() function to init_async() to make sure we
catch all callers, since they'll now need to call the matching
start_async().
We could leave run_async() as a wrapper that does both, but there's not
much point. There are only two callers, one of which is fsmonitor, which
will want to actually do work between the two calls. And the other is
just a test-tool wrapper.
For now I've added the start_async() calls in fsmonitor where they would
otherwise have happened, so there should be no behavior change with this
patch.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Koji Nakamaru <koji.nakamaru@gree.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A failure scenario reported in an earlier patch series[1] that several
`git worktree` subcommands failed or misbehaved when invoked from within
linked worktrees that used relative paths.
This adds a test that executes a `worktree prune` command inside both an
internally and an externally linked worktree and asserts that the other
worktree was not pruned.
[1]: https://lore.kernel.org/git/CAPig+cQXFy=xPVpoSq6Wq0pxMRCjS=WbkgdO+3LySPX=q0nPCw@mail.gmail.com/
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Caleb White <cdwhite3@pm.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git currently stores absolute paths to both the main repository and
linked worktrees. However, this causes problems when moving repositories
or working in containerized environments where absolute paths differ
between systems. The worktree links break, and users are required to
manually execute `worktree repair` to repair them, leading to workflow
disruptions. Additionally, mapping repositories inside of containerized
environments renders the repository unusable inside the containers, and
this is not repairable as repairing the worktrees inside the containers
will result in them being broken outside the containers.
To address this, this patch makes Git always write relative paths when
linking worktrees. Relative paths increase the resilience of the
worktree links across various systems and environments, particularly
when the worktrees are self-contained inside the main repository (such
as when using a bare repository with worktrees). This improves
portability, workflow efficiency, and reduces overall breakages.
Although Git now writes relative paths, existing repositories with
absolute paths are still supported. There are no breaking changes
to workflows based on absolute paths, ensuring backward compatibility.
At a low level, the changes involve modifying functions in `worktree.c`
and `builtin/worktree.c` to use `relative_path()` when writing the
worktree’s `.git` file and the main repository’s `gitdir` reference.
Instead of hardcoding absolute paths, Git now computes the relative path
between the worktree and the repository, ensuring that these links are
portable. Locations where these respective file are read have also been
updated to properly handle both absolute and relative paths. Generally,
relative paths are always resolved into absolute paths before any
operations or comparisons are performed.
Additionally, `repair_worktrees_after_gitdir_move()` has been introduced
to address the case where both the `<worktree>/.git` and
`<repo>/worktrees/<id>/gitdir` links are broken after the gitdir is
moved (such as during a re-initialization). This function repairs both
sides of the worktree link using the old gitdir path to reestablish the
correct paths after a move.
The `worktree.path` struct member has also been updated to always store
the absolute path of a worktree. This ensures that worktree consumers
never have to worry about trying to resolve the absolute path themselves.
Signed-off-by: Caleb White <cdwhite3@pm.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This lays the groundwork for the next patch, which needs the backlink
returned from infer_backlink() as a `strbuf`. It seemed inefficient to
convert from `strbuf` to `char*` and back to `strbuf` again.
This refactors infer_backlink() to return an integer result and use a
pre-allocated `strbuf` for the inferred backlink path, replacing the
previous `char*` return type and improving efficiency.
Signed-off-by: Caleb White <cdwhite3@pm.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* es/worktree-repair-copied:
worktree: repair copied repository and linked worktrees
|
|
Ensure `server_options` is properly cleared using `string_list_clear()`
in `builtin/ls-remote.c:cmd_ls_remote`.
Although we cannot yet enable `TEST_PASSES_SANITIZE_LEAK=true` for
`t/t5702-protocol-v2.sh` due to other existing leaks, this fix ensures
that "git-ls-remote" related server options tests pass the sanitize leak
check:
...
ok 12 - server-options are sent when using ls-remote
ok 13 - server-options from configuration are used by ls-remote
...
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix an issue where server options specified via the command line
(`--server-option` or `-o`) were not sent when fetching from multiple
remotes using Git protocol v2.
To reproduce the issue with a repository containing multiple remotes:
GIT_TRACE_PACKET=1 git -c protocol.version=2 fetch --server-option=demo --all
Observe that no server options are sent to any remote.
The root cause was identified in `builtin/fetch.c:fetch_multiple`, which
is invoked when fetching from more than one remote. This function forks
a `git-fetch` subprocess for each remote but did not include the
specified server options in the subprocess arguments.
This commit ensures that command-line specified server options are
properly passed to each subprocess. Relevant tests have been added.
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Utilize the `server_options` from the corresponding remote during the
handshake in `transport.c` when Git protocol v2 is detected. This helps
initialize the `server_options` in `transport.h:transport` if no server
options are set for the transport (typically via `--server-option` or
`-o`).
While another potential place to incorporate server options from the
remote is in `transport.c:transport_get`, setting server options for a
transport using a protocol other than v2 could lead to unexpected errors
(see `transport.c:die_if_server_options`).
Relevant tests and documentation have been updated accordingly.
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, server options for Git protocol v2 can only be specified via
the command line option "--server-option" or "-o", which is inconvenient
when users want to specify a list of default options to send. Therefore,
we are introducing a new configuration to hold a list of default server
options, akin to the `push.pushOption` configuration for push options.
Initially, I named the new configuration `fetch.serverOption` to align
with `push.pushOption`. However, after discussing with Patrick, it was
renamed to `remote.<name>.serverOption` as suggested, because:
1. Server options are designed to be server-specific, making it more
logical to use a per-remote configuration.
2. Using "fetch." prefixed configurations in git-clone or git-ls-remote
seems out of place and inconsistent in design.
The parsing logic for `remote.<name>.serverOption` also relies on
`transport.c:parse_transport_option`, similar to `push.pushOption`, and
they follow the same priority design:
1. Server options set in lower-priority configuration files (e.g.,
/etc/gitconfig or $HOME/.gitconfig) can be overridden or unset in
more specific repository configurations using an empty string.
2. Command-line specified server options take precedence over those from
the configuration.
Server options from configuration are stored to the corresponding
`remote.h:remote` as a new field `server_options`. The field will be
utilized in the subsequent commit to help initialize the
`server_options` of `transport.h:transport`.
And documentation have been updated accordingly.
Helped-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Liu Zhongbo <liuzhongbo.6666@bytedance.com>
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the `parse_transport_option()` method to parse the `push.pushOption`
configuration. This method will also be used in the next commit to
handle the new `remote.<name>.serverOption` configuration for setting
server options in Git protocol v2.
Signed-off-by: Xing Xin <xingxin.xx@bytedance.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These links should point to `.html` files, not to `.txt` ones.
Compare also to 4945f046c7f (api docs: link to html version of
api-trace2, 2022-09-16).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Same as the preceding commit, we unconditionally dereference the index's
cache entries depending on the number of cache-tree entries, which can
lead to a segfault when the cache-tree is corrupted. Fix this bug.
This also makes t4058 pass with the leak sanitizer enabled.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t4058 we have some tests that exercise git-read-tree(1) when used
with a tree that contains duplicate entries. While the expectation is
that we fail, we ideally should fail gracefully without a segfault.
But that is not the case: we never check that the number of entries in
the cache-tree is less than or equal to the number of entries in the
index. This can lead to an out-of-bounds read as we unconditionally
access `istate->cache[idx]`, where `idx` is controlled by the number of
cache-tree entries and the current position therein. The result is a
segfault.
Fix this segfault by adding a sanity check for the number of index
entries before dereferencing them.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `cache_tree_verify()` will `BUG()` whenever it finds that
the cache-tree extension of the index is corrupt. The function is thus
inherently untestable because the resulting call to `abort()` will be
detected by our testing framework and labelled an error. And rightfully
so: it shouldn't ever be possible to hit bugs, as they should indicate a
programming error rather than corruption of on-disk state.
Refactor the function to instead return error codes. This also ensures
that the function can be used e.g. by git-fsck(1) without the whole
process dying. Furthermore, this refactoring plugs some memory leaks
when returning early by creating a common exit path.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n-2.47.0-rnd2
* tag 'l10n-2.47.0-rnd2' of https://github.com/git-l10n/git-po:
l10n: Update German translation
l10n: bg.po: Updated Bulgarian translation (5772t)
l10n: vi: Updated translation for 2.47
l10n: zh_TW: Git 2.47
l10n: new lead for Catalan translation
l10n: Update Catalan translation
l10n: fr.po: 2.47.0
l10n: zh_CN: updated translation for 2.47
l10n: po-id for 2.47
l10n: tr: Update Turkish translations for 2.47.0
l10n: sv.po: Update Swedish translation
|
|
* 'l10n-de-2.47' of github.com:ralfth/git:
l10n: Update German translation
|
|
* 'master' of github.com:alshopov/git-po:
l10n: bg.po: Updated Bulgarian translation (5772t)
|
|
* 'catalan-247' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
* 'new-catalan-maintainer' of github.com:Softcatala/git-po:
l10n: new lead for Catalan translation
|
|
* 'l10n/zh-TW/2024-10-05' of github.com:l10n-tw/git-po:
l10n: zh_TW: Git 2.47
|
|
* 'tl/zh_CN_2.47.0_rnd' of github.com:dyrone/git:
l10n: zh_CN: updated translation for 2.47
|
|
* 'master' of github.com:nafmo/git-l10n-sv:
l10n: sv.po: Update Swedish translation
|
|
* 'fr_2.47.0_rnd1' of github.com:jnavila/git:
l10n: fr.po: 2.47.0
|
|
* 'vi-2.47' of github.com:Nekosha/git-po:
l10n: vi: Updated translation for 2.47
|
|
* 'po-id' of github.com:bagasme/git-po:
l10n: po-id for 2.47
|
|
Reviewed-by: Matthias Rüster <matthias.ruester@gmail.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Signed-off-by: Vũ Tiến Hưng <newcomerminecraft@gmail.com>
|
|
Co-authored-by: Lumynous <lumynou5.tw@gmail.com>
Signed-off-by: Yi-Jyun Pan <pan93412@gmail.com>
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
macOS with fsmonitor daemon can hang forever when a submodule is
involved, which has been corrected.
* kn/osx-fsmonitor-with-submodules-fix:
fsmonitor OSX: fix hangs for submodules
|
|
Typofixes.
* ak/doc-typofix:
Documentation: fix typos
Documentation/config: fix typos
|
