| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When adding a remote to bare repository with "git remote add --mirror",
running fetch will fail to update HEAD to the remote's HEAD, since it
does not know how to handle bare repositories. On the other hand HEAD
already has content, since "git init --bare" has already set HEAD to
whatever is the default branch set for the user. Unless this - by chance
- is the same as the remote's HEAD, HEAD will be pointing to a bad
symref. Teach set_head to handle bare repositories, by overwriting HEAD
so it mirrors the remote's HEAD.
Note, that in this case overriding the local HEAD reference is
necessary, since HEAD will exist before fetch can be run, but this
should not be an issue, since the whole purpose of --mirror is to be an
exact mirror of the remote, so following any changes to HEAD makes
sense.
Also note, that although "git remote set-head" also fails when trying to
update the remote's locally tracked HEAD in a mirrored bare repository,
the usage of the command does not make much sense after this patch:
fetch will update the remote HEAD correctly, and setting it manually to
something else is antithetical to the concept of mirroring.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning a repository remote/HEAD is created, but when the user
creates a repository with git init, and later adds a remote, remote/HEAD
is only created if the user explicitly runs a variant of "remote
set-head". Attempt to set remote/HEAD during fetch, if the user does not
have it already set. Silently ignore any errors.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow the caller to specify that it only wants to update the symref if
it does not already exist. Silently ignore the error from the
transaction API if the symref already exists.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently there is only one special error for transaction, for when
there is a naming conflict, all other errors are dumped under a generic
error. Add a new special error case for when the caller requests the
reference to be updated only when it does not yet exist and the
reference actually does exist.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, set-head --auto will print a message saying "remote/HEAD set
to branch", which implies something was changed.
Change the output of --auto, so the output actually reflects what was
done: a) set a previously unset HEAD, b) change HEAD because remote
changed or c) no updates. As edge cases, if HEAD is changed from
a previous symbolic reference that was not a remote branch, explicitly
call attention to this fact, and also notify the user if the previous
reference was not a symbolic reference.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make two different readability refactors:
Rename strbufs "buf" and "buf2" to something more explanatory.
Instead of calling get_main_ref_store(the_repository) multiple times,
call it once and store the result in a new refs variable. Although this
change probably offers some performance benefits, the main purpose is to
shorten the line lengths of function calls using this variable.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When updating a symref with update_symref it's currently not possible to
know for sure what was the previous value that was overwritten. Extend
refs_update_symref under a new function name, to record the value after
the ref has been locked if the caller of refs_update_symref_extended
requests it via a new variable in the function call. Make the return
value of the function notify the caller, if the previous value was
actually not a symbolic reference. Keep the original refs_update_symref
function with the same signature, but now as a wrapper around
refs_update_symref_extended.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the symbolic reference we want to read with refs_read_symbolic_ref
is actually not a symbolic reference, the files and the reftable
backends return different values (1 and -1 respectively). Standardize
the returned values so that 0 is success, -1 is a generic error and -2
is that the reference was actually non-symbolic.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test coverage was missing a test for the failure branch of remote
set-head auto's output. Add the missing text and while we are at it,
correct a small grammatical mistake in the error's output ("setup" is
the noun, "set up" is the verb).
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consider the bare repository called "mirror" in the test. Running `git
remote add --mirror -f origin ../one` will not change HEAD, consequently
if init.defaultBranch is not the same as what HEAD in the remote
("one"), HEAD in "mirror" will be pointing to a non-existent reference.
Hence if "mirror" is used as a remote by yet another repository,
ls-remote will not show HEAD. On the other hand, if init.defaultBranch
happens to match HEAD in "one", then ls-remote will show HEAD.
Since the "ci/run-build-and-tests.sh" script globally exports
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main for some (but not all) jobs,
there may be a drift in some tests between how the test repositories are
set up in the CI and during local testing, if the test itself uses
"master" as default instead of "main". In particular, this happens in
t5505-remote.sh. This issue does not manifest currently, as the test
does not do any remote HEAD manipulation where this would come up, but
should such things be added, a locally passing test would break the CI
and vice-versa.
Set GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main in t5505-remote to be
consistent with the CI.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the main window is already visible when gitk waits for it to
become visible, gitk hangs forever.
This commit adds a check whether the window is already visible.
See https://wiki.tcl-lang.org/page/tkwait+visibility
Signed-off-by: Tobias Pietzsch <pietzsch@mycroft.speedport.ip>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
In GNU Make commit 07fcee35 ([SV 64815] Recipe lines cannot contain
conditional statements, 2023-05-22) and following, conditional
statements may no longer be preceded by a tab character (which Make
refers to as the recipe prefix).
There are a handful of spots in our various Makefile(s) which will break
in a future release of Make containing 07fcee35. For instance, trying to
compile the pre-image of this patch with the tip of make.git results in
the following:
$ make -v | head -1 && make
GNU Make 4.4.90
config.mak.uname:842: *** missing 'endif'. Stop.
The kernel addressed this issue in 82175d1f9430 (kbuild: Replace tabs
with spaces when followed by conditionals, 2024-01-28). Address the
issues in Git's tree by applying the same strategy.
When a conditional word (ifeq, ifneq, ifdef, etc.) is preceded by one or
more tab characters, replace each tab character with 8 space characters
with the following:
find . -type f -not -path './.git/*' -name Makefile -or -name '*.mak' |
xargs perl -i -pe '
s/(\t+)(ifn?eq|ifn?def|else|endif)/" " x (length($1) * 8) . $2/ge unless /\\$/
'
The "unless /\\$/" removes any false-positives (like "\telse \"
appearing within a shell script as part of a recipe).
After doing so, Git compiles on newer versions of Make:
$ make -v | head -1 && make
GNU Make 4.4.90
GIT_VERSION = 2.44.0.414.gfac1dc44ca9
[...]
$ echo $?
0
Reported-by: Dario Gjorgjevski <dario.gjorgjevski@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cherry-picked-from: 728b9ac0c3b93aaa4ea80280c591deb198051785
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
These sites offer https versions of their content.
Using the https versions provides some protection for users.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cherry-picked-from: d05b08cd52cfda627f1d865bdfe6040a2c9521b5
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
It's somewhat traditional to respect sites' self-identification.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cherry-picked-from: 65175d9ea26bebeb9d69977d0e75efc0e88dbced
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Object reuse code based on multi-pack-index sent an unwanted copy
of object.
* tb/multi-pack-reuse-dupfix:
pack-objects: only perform verbatim reuse on the preferred pack
t5332-multi-pack-reuse.sh: demonstrate duplicate packing failure
|
|
Use of some uninitialized variables in "git difftool" has been
corrected.
* sm/difftool:
builtin/difftool: intialize some hashmap variables
|
|
Double-free fix.
* jk/fetch-prefetch-double-free-fix:
refspec: store raw refspecs inside refspec_item
refspec: drop separate raw_nr count
fetch: adjust refspec->raw_nr when filtering prefetch refspecs
|
|
Avoid build/test breakage on a system without working malloc debug
support dynamic library.
* jk/test-malloc-debug-check:
test-lib: move malloc-debug setup after $PATH setup
test-lib: check malloc debug LD_PRELOAD before using
|
|
The perf test suite prefers to use test_file_size over 'wc -c' when
inside of a test_size block. One advantage is that accidentally writign
"wc -c file" (instead of "wc -c <file") does not inadvertently break the
tests (since the former will include the filename in the output of wc).
Both of the two uses of test_size use "wc -c", but let's convert those
to the more conventional test_file_size helper instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the boundary-based bitmap traversal, we use the given 'rev_info'
structure to first do a commit-only walk in order to determine the
boundary between interesting and uninteresting objects.
That walk only looks at commit objects, regardless of the state of
revs->blob_objects, revs->tree_objects, and so on. In order to do this,
we store the state of these variables in temporary fields before
setting them back to zero, performing the traversal, and then setting
them back.
But there is a typo here that dates back to b0afdce5da (pack-bitmap.c:
use commit boundary during bitmap traversal, 2023-05-08), where we
incorrectly store the value of the "tags" field as "revs->blob_objects".
This could lead to problems later on if, say, the caller wants tag
objects but *not* blob objects. In the pre-image behavior, we'd set
revs->tag_objects back to the old value of revs->blob_objects, thus
emitting fewer objects than expected back to the caller.
Fix that by correctly assigning the value of 'revs->tag_objects' to the
'tmp_tags' field.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the default value for TEST_PASSES_SANITIZE_LEAK is `true` there
is no longer a need to have that variable declared in all of our tests.
Drop it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Over the last two releases we have plugged a couple hundred of memory
leaks exposed by the Git test suite. With the preceding commits we have
finally fixed the last leak exposed by our test suite, which means that
we are now basically leak free wherever we have branch coverage.
From hereon, the Git test suite should ideally stay free of memory
leaks. Most importantly, any test suite that is being added should
automatically be subject to the leak checker, and if that test does not
pass it is a strong signal that the added code introduced new memory
leaks and should not be accepted without further changes.
Drop the infrastructure around TEST_PASSES_SANITIZE_LEAK to reflect this
new requirement. Like this, all test suites will be subject to the leak
checker by default.
This is being intentionally strict, but we still have an escape hatch:
the SANITIZE_LEAK prerequisite. There is one known case in t5601 where
the leak sanitizer itself is buggy, so adding this prereq in such cases
is acceptable. Another acceptable situation is when a newly added test
uncovers preexisting memory leaks: when fixing that memory leak would be
sufficiently complicated it is fine to annotate and document the leak
accordingly. But in any case, the burden is now on the patch author to
explain why exactly they have to add the SANITIZE_LEAK prerequisite.
The TEST_PASSES_SANITIZE_LEAK annotations will be dropped in the next
patch.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a couple of !SANITIZE_LEAK prerequisites for tests that used to
fail due to memory leaks. These have all been fixed by now, so let's
drop the prerequisite.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both t5558 and t5601 are leak-free starting with 6dab49b9fb (bundle-uri:
plug leak in unbundle_from_file(), 2024-10-10). Mark them accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running t5601 with the leak checker enabled we can see a hang in
our CI systems. This hang seems to be system-specific, as I cannot
reproduce it on my own machine.
As it turns out, the issue is in those testcases that exercise cloning
of `~repo`-style paths. All of the testcases that hang eventually end up
interpreting "repo" as the username and will call getpwnam(3p) with that
username. That should of course be fine, and getpwnam(3p) should just
return an error. But instead, the leak sanitizer seems to be recursing
while handling a call to `free()` in the NSS modules:
#0 0x00007ffff7fd98d5 in _dl_update_slotinfo (req_modid=1, new_gen=2) at ../elf/dl-tls.c:720
#1 0x00007ffff7fd9ac4 in update_get_addr (ti=0x7ffff7a91d80, gen=<optimized out>) at ../elf/dl-tls.c:916
#2 0x00007ffff7fdc85c in __tls_get_addr () at ../sysdeps/x86_64/tls_get_addr.S:55
#3 0x00007ffff7a27e04 in __lsan::GetAllocatorCache () at ../../../../src/libsanitizer/lsan/lsan_linux.cpp:27
#4 0x00007ffff7a2b33a in __lsan::Deallocate (p=0x0) at ../../../../src/libsanitizer/lsan/lsan_allocator.cpp:127
#5 __lsan::lsan_free (p=0x0) at ../../../../src/libsanitizer/lsan/lsan_allocator.cpp:220
...
#261505 0x00007ffff7fd99f2 in free (ptr=<optimized out>) at ../include/rtld-malloc.h:50
#261506 _dl_update_slotinfo (req_modid=1, new_gen=2) at ../elf/dl-tls.c:822
#261507 0x00007ffff7fd9ac4 in update_get_addr (ti=0x7ffff7a91d80, gen=<optimized out>) at ../elf/dl-tls.c:916
#261508 0x00007ffff7fdc85c in __tls_get_addr () at ../sysdeps/x86_64/tls_get_addr.S:55
#261509 0x00007ffff7a27e04 in __lsan::GetAllocatorCache () at ../../../../src/libsanitizer/lsan/lsan_linux.cpp:27
#261510 0x00007ffff7a2b33a in __lsan::Deallocate (p=0x5020000001e0) at ../../../../src/libsanitizer/lsan/lsan_allocator.cpp:127
#261511 __lsan::lsan_free (p=0x5020000001e0) at ../../../../src/libsanitizer/lsan/lsan_allocator.cpp:220
#261512 0x00007ffff793da25 in module_load (module=0x515000000280) at ./nss/nss_module.c:188
#261513 0x00007ffff793dee5 in __nss_module_load (module=0x515000000280) at ./nss/nss_module.c:302
#261514 __nss_module_get_function (module=0x515000000280, name=name@entry=0x7ffff79b9128 "getpwnam_r") at ./nss/nss_module.c:328
#261515 0x00007ffff793e741 in __GI___nss_lookup_function (fct_name=<optimized out>, ni=<optimized out>) at ./nss/nsswitch.c:137
#261516 __GI___nss_next2 (ni=ni@entry=0x7fffffffa458, fct_name=fct_name@entry=0x7ffff79b9128 "getpwnam_r", fct2_name=fct2_name@entry=0x0, fctp=fctp@entry=0x7fffffffa460,
status=status@entry=0, all_values=all_values@entry=0) at ./nss/nsswitch.c:120
#261517 0x00007ffff794c6a7 in __getpwnam_r (name=name@entry=0x501000000060 "repo", resbuf=resbuf@entry=0x7ffff79fb320 <resbuf>, buffer=<optimized out>,
buflen=buflen@entry=1024, result=result@entry=0x7fffffffa4b0) at ../nss/getXXbyYY_r.c:343
#261518 0x00007ffff794c4d8 in getpwnam (name=0x501000000060 "repo") at ../nss/getXXbyYY.c:140
#261519 0x00005555557e37ff in getpw_str (username=0x5020000001a1 "repo", len=4) at path.c:613
#261520 0x00005555557e3937 in interpolate_path (path=0x5020000001a0 "~repo", real_home=0) at path.c:654
#261521 0x00005555557e3aea in enter_repo (path=0x501000000040 "~repo", strict=0) at path.c:718
#261522 0x000055555568f0ba in cmd_upload_pack (argc=1, argv=0x502000000100, prefix=0x0, repo=0x0) at builtin/upload-pack.c:57
#261523 0x0000555555575ba8 in run_builtin (p=0x555555a20c98 <commands+3192>, argc=2, argv=0x502000000100, repo=0x555555a53b20 <the_repo>) at git.c:481
#261524 0x0000555555576067 in handle_builtin (args=0x7fffffffaab0) at git.c:742
#261525 0x000055555557678d in cmd_main (argc=2, argv=0x7fffffffac58) at git.c:912
#261526 0x00005555556963cd in main (argc=2, argv=0x7fffffffac58) at common-main.c:64
Note that this stack is more than 260000 function calls deep. Run under
the debugger this will eventually segfault, but in our CI systems it
seems like this just hangs forever.
I assume that this is a bug either in the leak sanitizer or in glibc, as
I cannot reproduce it on my machine. In any case, let's work around the
bug for now by marking those tests with the "!SANITIZE_LEAK" prereq.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `UNLEAK()` macro has been introduced with 0e5bba53af (add UNLEAK
annotation for reducing leak false positives, 2017-09-08) to help us
reduce the amount of reported memory leaks in cases we don't care about,
e.g. when exiting immediately afterwards. We have since removed all of
its users in favor of freeing the memory and thus don't need the macro
anymore.
Remove it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two users of `UNLEAK()` left in our codebase:
- In "builtin/clone.c", annotating the `repo` variable. That leak has
already been fixed though as you can see in the context, where we do
know to free `repo_to_free`.
- In "builtin/diff.c", to unleak entries of the `blob[]` array. That
leak has also been fixed, because the entries we assign to that
array come from `rev.pending.objects`, and we do eventually release
`rev`.
This neatly demonstrates one of the issues with `UNLEAK()`: it is quite
easy for the annotation to become stale. A second issue is that its
whole intent is to paper over leaks. And while that has been a necessary
evil in the past, because Git was leaking left and right, it isn't
really much of an issue nowadays where our test suite has no known leaks
anymore.
Remove the last two users of this macro.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're leaking the commit-graph in the "test-helper read-graph"
subcommand, but as the leak is annotated with `UNLEAK()` the leak
sanitizer doesn't complain.
Fix the leak by calling `free_commit_graph()`. Besides getting rid of
the `UNLEAK()` annotation, it also increases code coverage because we
properly release resources as Git would do it, as well.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sorting options are leaking, but given that they are marked with
`UNLEAK()` the leak sanitizer doesn't complain.
Fix the leak by creating a common exit path and clearing the vector such
that we can get rid of the `UNLEAK()` annotation entirely.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We've got a couple of leaking directory paths in git-init(1), all of
which are marked with `UNLEAK()`. Fixing them is trivial, so let's do
that instead so that we can get rid of `UNLEAK()` entirely.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `check_git_cmd()` function is declared to return a string constant.
And while it sometimes does return a constant, it may also return an
allocated string in two cases:
- When handling aliases. This case is already marked with `UNLEAK()`
to work around the leak.
- When handling unknown commands in case "help.autocorrect" is
enabled. This one is not marked with `UNLEAK()`.
The function only has a single caller, so let's fix its return type to
be non-constant, consistently return an allocated string and free it at
its callsite to plug the leak.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While `help_unknown_cmd()` would usually die on an unknown command, it
instead returns an autocorrected command when "help.autocorrect" is set.
But while the function is declared to return a string constant, it
actually returns an allocated string in that case. Callers thus aren't
aware that they have to free the string, leading to a memory leak.
Fix the function return type to be non-constant and free the returned
value at its only callsite.
Note that we cannot simply take ownership of `main_cmds.names[0]->name`
and then eventually free it. This is because the `struct cmdname` is
using a flex array to allocate the name, so the name pointer points into
the middle of the structure and thus cannot be freed.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're populating multiple `struct cmdnames`, but don't ever free them.
Plug this memory leak.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We're reading the "help.autocorrect" and "alias.*" configuration into
global variables, which makes it hard to manage their lifetime
correctly. Refactor the code to use a struct instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both `git sparse-checkout add` and `git sparse-checkout set` accept a
list of additional directories or patterns. These get massaged via calls
to `sanitize_paths()`, which may end up modifying the passed-in array by
updating its pointers to be prefixed paths. This allocates memory that
we never free.
Refactor the code to instead use a `struct strvec`, which makes it way
easier for us to track the lifetime correctly. The couple of extra
memory allocations likely do not matter as we only ever populate it with
command line arguments.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `move_cache_to_base_index()` we move the index cache of the main
index into the split index, which is used when writing a shared index.
But we don't release the old split index base in case we already had a
split index before this operation, which can thus leak memory.
Plug the leak by releasing the previous base.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar as with the preceding commit, `handle_builtin()` does not
properly track lifetimes of the `argv` array and its strings. As it may
end up modifying the array this can lead to memory leaks in case it
contains allocated strings.
Refactor the function to use a `struct strvec` instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `handle_alias()` we use both `argcp` and `argv` as in-out parameters.
Callers mostly pass through the static array from `main()`, but once we
handle an alias we replace it with an allocated array that may contain
some allocated strings. Callers do not handle this scenario at all and
thus leak memory.
We could in theory handle the lifetime of `argv` in a hacky fashion by
letting callers free it in case they see that an alias was handled. But
while that would likely work, we still wouldn't be able to easily handle
the lifetime of strings referenced by `argv`.
Refactor the code to instead use a `struct strvec`, which effectively
removes the need for us to manually track lifetimes.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new `strvec_splice()` function that can replace a range of
strings in the vector with another array of strings. This function will
be used in subsequent commits.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `process_ranges_merge_commit()` we try to figure out which of the
parents can be blamed for the given line changes. When we figure out
that none of the files in the line-log have changed we assign the
complete blame to that commit and rewrite the parents of the current
commit to only use that single parent.
This is done via `commit_list_append()`, which is misleadingly _not_
appending to the list of parents. Instead, we overwrite the parents with
the blamed parent. This makes us lose track of the old pointers,
creating a memory leak.
Fix this issue by freeing the parents before we overwrite them.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are various cases where we leak commit list items because we
evict items from the list, but don't free them. Plug those.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we free the result commit list at the end of `check_merge_base()`,
we forget to free any items that we have already iterated over. Fix this
by using a separate variable to iterate through them.
This leak is exposed by t6030, but plugging it does not make the whole
test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are multiple leaks in `bisect_next_all()`. For one we don't free
the `tried` commit list. Second, one of the branches uses a direct
return instead of jumping to the cleanup code.
Fix these by freeing the commit list and converting the return to a
goto.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When reading bisect refs we read the reference mapping to the "bad" term
into the global `current_bad_oid` variable. This is an allocated string,
but because it is global we never have to free it. This changes though
when `register_ref()` is being called multiple times, at which point
we'll overwrite the previous pointer and thus make it unreachable.
Fix this issue by freeing the previous value. This leak is exposed by
t6030, but plugging it does not make the whole test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When handling a bad merge base we print an error, which includes the set
of good revisions joined by spaces. This string is allocated, but never
freed.
Fix this memory leak. Note that the local `bad_hex` varible also looks
like a string that we should free. But in fact, `oid_to_hex()` returns
an address to a static variable even though it is declared to return a
non-constant string. The function signature is thus quite misleading and
really should be fixed, but doing so is outside of the scope of this
patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even though `read_bisect_terms()` is declared as assigning string
constants, it in fact assigns allocated strings to the `read_bad` and
`read_good` out parameters. The only callers of this function assign the
result to global variables and thus don't have to free them in order to
be leak-free. But that changes when executing the function multiple
times because we'd then overwrite the previous value and thus make it
unreachable.
Fix the function signature and free the previous values. This leak is
exposed by t0630, but plugging it does not make the whole test suite
pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When passing `--incremental` to git-blame(1) we exit early by jumping to
the `cleanup` label. But some of the cleanups we perform are handled
between the `goto` and its label, and thus we leak the data.
Move the cleanups after the `cleanup` label. While at it, move the logic
to free the scoreboard's `final_buf` into `cleanup_scoreboard()` and
drop its `const` declaration.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Besides the textual symref, we also allow symbolic links as the symref.
So, we should also provide the consistency check as what we have done
for textual symref. And also we consider deprecating writing the
symbolic links. We first need to access whether symbolic links still
be used. So, add a new fsck message "symlinkRef(INFO)" to tell the
user be aware of this information.
We have already introduced "files_fsck_symref_target". We should reuse
this function to handle the symrefs which use legacy symbolic links. We
should not check the trailing garbage for symbolic refs. Add a new
parameter "symbolic_link" to disable some checks which should only be
executed for textual symrefs.
And we need to also generate the "referent" parameter for reusing
"files_fsck_symref_target" by the following steps:
1. Use "strbuf_add_real_path" to resolve the symlink and get the
absolute path "ref_content" which the symlink ref points to.
2. Generate the absolute path "abs_gitdir" of "gitdir" and combine
"ref_content" and "abs_gitdir" to extract the relative path
"relative_referent_path".
3. If "ref_content" is outside of "gitdir", we just set "referent" with
"ref_content". Instead, we set "referent" with
"relative_referent_path".
Mentored-by: Patrick Steinhardt <ps@pks.im>
Mentored-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: shejialuo <shejialuo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
