| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In pack-bitmap.c:load_bitmap_entries_v1, the function `read_bitmap_1`
allocates a bitmap and reads index data into it. However, if any of
the validation checks following the allocation fail, the allocated bitmap
is not freed, resulting in a memory leak. To avoid this, the validation
checks should be performed before the bitmap is allocated.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "stats" directory contains a couple of scripts to do some statistics
on a repository:
- "git-common-hash" shows the longest common hash prefixes and can be
used to determine the minimum prefix length to use for object names
to be unique. The script has last been touched in 53474eb92ff
(contrib: update stats/mailmap script, 2012-12-12) and searching for
it on the internet doesn't really surface any potential use cases or
even mentions of it.
Modern Git also shouldn't really need this tool as it knows to
automatically scale printed prefixes via some heuristics.
- "mailmap.pl" performs some statistics on the number of mailmapped
commits in a repository. It has last been modified in 53474eb92ff
(contrib: update stats/mailmap script, 2012-12-12) and has since
been bitrotting. It doesn't even compile nowadays anymore:
$ perl contrib/stats/mailmap.pl
Experimental keys on scalar is now forbidden at contrib/stats/mailmap.pl line 57.
Type of arg 1 to keys must be hash or array (not hash element) at contrib/stats/mailmap.pl line 57, near "}) "
Experimental keys on scalar is now forbidden at contrib/stats/mailmap.pl line 57.
Type of arg 1 to keys must be hash or array (not private variable) at contrib/stats/mailmap.pl line 57, near "$h)"
Experimental keys on scalar is now forbidden at contrib/stats/mailmap.pl line 64.
Type of arg 1 to keys must be hash or array (not private variable) at contrib/stats/mailmap.pl line 64, near "$h)"
Execution of contrib/stats/mailmap.pl aborted due to compilation errors.
This should be good-enough signal to indicate that nobody is using
this script at all anymore.
- "packinfo.pl" takes the output from git-verify-pack(1) and performs
some pretty printing thereof. On the one hand it reformats the
output to be easier to read and provide some summaries. On the other
hand it may also print filenames of blobs.
We don't have any replacement for this tool. Ideally, we should move
its functionality into git-verify-pack(1) itself.
Remove the first two scripts, but retain "packinfo.pl".
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git-new-workdir" command has been introduced to make it possible to
have a separate working directory in a different place. The command thus
predates git-worktree(1), which is what people use nowadays to create
any such working directory. As such, the script doesn't really have much
of a reason to exist nowadays anymore.
It also doesn't seem like the script is still in use: the last time it
has received an update was in e32afab7b03 (git-new-workdir: don't fail
if the target directory is empty, 2014-11-26), more than a decade ago.
Remove it as well as the tests that depend on it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While the "emacs/" directory still exists, all of its code has been
replaced with stubs in 6d5ed4836db (git{,-blame}.el: remove old
bitrotting Emacs code, 2018-04-11). Instead, the recommendation is to
use Emacs' own vc-annotate mode.
Remove the code altogether.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git-resurrect.sh" script can be used to find traces of a branch tip
in the reflog and resurrect that branch. Despite a couple of global
cleanups, the script hasn't seen any activity since it was introduced in
e1ff064e1bf (contrib git-resurrect: find traces of a branch name and
resurrect it, 2009-02-04).
Furthermore, the tool does not work with the "reftable" backend at all
as it directly reads ".git/logs/HEAD". As reflogs are stored as part of
the individual tables though that file wouldn't exist in a "reftable"-
enabled repository.
Last but not least, the tool doesn't even work unless it is explicitly
invoked via `git resurrect` as it sources "git-sh-setup". As none of our
build systems know to install this script, users thus have to go out of
their way to really make it work, which is highly unlikely.
Another source that indicates that this tool can be removed is a
question for how to restore deleted branches on StackOverflow [1]. The
top-voted answer uses git-reflog(1) directly and has received more than
3000 votes to date. While "git-resurrect.sh" is also mentioned, it only
got 16 upvotes, and comments mention the above caveat that users have to
do some manual setup to make it work.
It's thus rather clear that the tool doesn't have a lot or even any
users. Remove it.
[1]: https://stackoverflow.com/questions/3640764/can-i-recover-a-branch-after-its-deletion-in-git
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "persistent-https" remote helper supposedly speeds up SSL operations
by running a daemon that keeps a connection open to a remote server. It
is effectively unmaintained nowadays: the last time it received an
update was in accb613afd2 (contrib/persistent-https: use Git version for
build label, 2016-07-20) and its parent commits to make it compile with
Go 1.7+.
This Go toolchain is somewhat dated by now though and unsupported. The
oldest still-supported toolchain is Go 1.23, which was released in
August 2024. It is not possible to compile the remote helper with that
Go version anymore:
$ go version
go version go1.23.8 linux/amd64
$ make
case $(go version) in \
"go version go"1.[0-5].*) EQ=" " ;; *) EQ="=" ;; esac && \
go build -o git-remote-persistent-https \
-ldflags "-X main._BUILD_EMBED_LABEL${EQ}GIT_VERSION=2.49.0.943.g965a70ebf62"
go: cannot find main module, but found .git/config in /home/pks/Development/git
to create a module there, run:
cd ../.. && go mod init
make: *** [Makefile:31: git-remote-persistent-https] Error 1
The problem is that modern Go toolchains require a "go.mod" file, but we
don't have any such files. This requirement exists since quite a while
already, so it's clear that nobody has tried to use this remote helper
anytime recent.
Remove the remote helper.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "mw-to-git" directory contains tools for accessing MediaWiki via
Git. The scripts are essentially unmaintained in Git: despite a couple
of global cleanups, the last changes were a couple of security-related
issues part of 9a8606465e8 (remote-mediawiki: use "sh" to eliminate
unquoted commands, 2020-09-21) and its parents. We don't ever run any of
the tests so it is more likely than not that many of the tests have been
bitrotting, like e.g. documented in f8ab018dafc (remote-mediawiki tests:
annotate failing tests, 2020-09-21).
According to Matthieu Moy [1], one of the original developers of this
tool, it didn't receive any attention recently and there is no
motivation to keep maintaining it anymore in the community. The project
has been spun out of Git [2] and thus has a new official home, but did
not receive much attention over there, either.
As such, it seems like the MediaWiki transport helper is slowly fading
away. But given that there is a new home, it doesn't make sense to have
it as part of Git anymore only to let it rot. Remove the directory.
[1]: <108f297a-b415-4742-80e4-51ea02af18e9@matthieu-moy.fr>
[2]: https://github.com/Git-Mediawiki/Git-Mediawiki
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "hooks" directory contains a handful of example hooks. Most of these
hooks are highly specific and haven't really received any updates over
the last couple of years, except for some global cleanups. The multimail
hook has also been removed in f74d11471fa (multimail: stop shipping a
copy, 2021-06-10) in favor of its upstream project [1].
Remove those hooks. If we want to provide examples for how to use Git
hooks we should do that as part of our documentation, for example in
githooks(5).
[1]: https://github.com/git-multimail/git-multimail
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "thunderbird-patch-inline" directory in "contrib/" contains a script
to send patch files via Thunderbird. This script depends on the
ExternalEditor extension [1], which seems to be effectively unmaintained
with the last update being in 2008. While the extension has eventually
been maintained in [2], that fork hasn't received any updates since
2020, either.
As such, the ExternalEditor extension does not work with modern versions
of Thunderbird anymore, and as the "thunderbird-patch-inline" script
depends on the ExternalEditor extension it likely doesn't work anymore,
either. The fact that this script hasn't been touched for the last 10
years outside of some global cleanup supports the idea that it is not
useful anymore.
Remove it.
[1]: https://globs.org/articles.php?lng=en&pg=2
[2]: https://github.com/exteditor/exteditor/releases
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "remote-helpers" directory contains two remote helper scripts for
Mercurial and Bazaar. These scripts have since been converted into stubs
in b2c851a8e67 (Revert "Merge branch 'jc/graduate-remote-hg-bzr' (early
part)", 2014-05-20) as the helpers have been moved into their own
upstream projects [1][2].
Given that these stubs have been created more than a decade ago it is
very unlikely that anybody still tries to use them. Remove them.
[1]: https://github.com/felipec/git-remote-bzr
[1]: https://github.com/felipec/git-remote-hg
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "examples" directory used to contain scripted versions of some of
our builtins. These have all been removed in 49eb8d39c78 (Remove
contrib/examples/*, 2018-03-25), but we left a note in the directory to
make it discoverable that there used to be examples.
It is unlikely that anybody still looks at these examples more than 7
years after they have been removed. Remove the note and its directory.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remotes can be configured either via a repository's config or by using
the ".git/branches/" or ".git/remotes/" directories. Back when the new
config-based mechanism has been introduced we also introduced a helper
script that migrates from the old-style remote configuration to the new
config-based mechanism.
With the recent removal announcement for the two directories we also
started to instruct users to migrate repositories that still use these
mechanism to use config-based remotes. Notably though, the migration
path doesn't even use the migration script. Instead, git-remote(1)
itself knows how to migrate any such remote via `git remote rename`.
In fact, a full migration _cannot_ use the script as it only knows to
migrate remotes from ".git/remotes/", but not ".git/branches/". As such,
the migration path via `git remote rename` is the only feasible way to
fully migrate repositories over to the new format.
Last but not least, the script doesn't even work as-is as it sources
"git-sh-setup". For this to work it would need to be invoked either via
Git so that this script is in our PATH, users would have to manually
call it with an adjusted PATH, or distributions need to install the
script into "$prefix/libexec/git-core" with a "git-" prefix. All of
these steps are unlikely enough to underpin the claim that this script
is not used at all.
So given that:
- The script cannot perform a full migration of all deprecated remote
types.
- We don't advertise it anywhere.
- It has been basically untouched since 2007.
- It doesn't even work unless users do manual steps.
It should be safe enough to just remove it. Do so.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In fd888311fbc (reftable/table: move reading block into block reader,
2025-04-07), we have refactored how reftable blocks are read so that
most of the logic is contained in the "block.c" subsystem itself. Most
importantly, the whole logic to read the data itself is now contained in
that subsystem.
This change caused a significant performance regression though when
reading blocks that aren't of the specific type one is searching for:
Benchmark 1: update-ref: create 100k refs (revision = fd888311fbc~)
Time (mean ± σ): 2.171 s ± 0.028 s [User: 1.189 s, System: 0.977 s]
Range (min … max): 2.117 s … 2.206 s 10 runs
Benchmark 2: update-ref: create 100k refs (revision = fd888311fbc)
Time (mean ± σ): 3.418 s ± 0.030 s [User: 2.371 s, System: 1.037 s]
Range (min … max): 3.377 s … 3.473 s 10 runs
Summary
update-ref: create 100k refs (revision = fd888311fbc~) ran
1.57 ± 0.02 times faster than update-ref: create 100k refs (revision = fd888311fbc)
The root caute of the performance regression is that we changed when
exactly blocks of an uninteresting type are being discarded. Previous to
the refactoring in the mentioned commit we'd load the block data, read
its type, notice that it's not the wanted type and discard the block.
After the commit though we don't discard the block immediately, but we
fully decode it only to realize that it's not the desired type. We then
discard the block again, but have already performed a bunch of pointless
work.
Fix the regression by making `reftable_block_init()` return early in
case the block is not of the desired type. This fixes the performance
hit:
Benchmark 1: update-ref: create 100k refs (revision = HEAD~)
Time (mean ± σ): 2.712 s ± 0.018 s [User: 1.990 s, System: 0.716 s]
Range (min … max): 2.682 s … 2.741 s 10 runs
Benchmark 2: update-ref: create 100k refs (revision = HEAD)
Time (mean ± σ): 1.670 s ± 0.012 s [User: 0.991 s, System: 0.676 s]
Range (min … max): 1.652 s … 1.693 s 10 runs
Summary
update-ref: create 100k refs (revision = HEAD) ran
1.62 ± 0.02 times faster than update-ref: create 100k refs (revision = HEAD~)
Note that the baseline performance is lower than in the original due to
a couple of unrelated performance improvements that have landed since
the original commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In builtin/am.c:split_mail_stgit_series, if `fopen` failed,
`series_dir_buf` allocated by `xstrdup` will leak. Add `free` in
`!fp` if branch will prevent the leak.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'test_path_is_file' is a modern path checking method in Git's development.
Replace the basic shell command 'test -f' with this approach.
Signed-off-by: Rodrigo Carvalho <rodrigorsdc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When refering to environment variables in the documentation, use the
ENV_VARIABLE format instead of $ENV_VARIABLE. The latter is used in the
documentation to refer to the actual value of the variable, not the name
of the variable.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To unify mark-up used in our documentation to a newer convention,
started by 22293895 (doc: apply synopsis simplification on git-clone
and git-init, 2024-09-24), update the documentation pages for 'git
verify-commit', 'git verify-tag', and 'git verify-pack' to
* use [synopsis], not [verse] in the SYNOPSIS section
* enclose `--option=<value>` in backquotes
* do not describe non-option arguments in the OPTIONS section
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To unify mark-up used in our documentation to a newer convention,
started by 22293895 (doc: apply synopsis simplification on git-clone
and git-init, 2024-09-24), update the documentation for 'git var' and
'git write-tree' to
* use [synopsis], not [verse] in the SYNOPSIS section
* enclose `--option=<value>` in backquotes
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To unify mark-up used in our documentation to a newer convention,
started by 22293895 (doc: apply synopsis simplification on git-clone
and git-init, 2024-09-24), update the documentation of 'git daemon'
to
* use [synopsis], not [verse] in the SYNOPSIS section
* enclose `--option=<value>` in backquotes
Also, split '--[no-]option' into '--option' and '--no-option'
to make it easier to grep for them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In reftable/writer.c:writer_index_hash(), if `reftable_buf_add` failed,
key allocated by `reftable_malloc` will not be insert into `obj_index_tree`
thus leaks. Simple add reftable_free(key) will solve this problem.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In reftable/writer.c:padded_write(), if w->writer failed, zeroed
allocated in `reftable_calloc` will leak. w->writer could be
`reftable_write_data` in reftable/stack.c, and could fail due to
some write error. Simply add reftable_free(zeroed) will solve this
problem.
Signed-off-by: Lidong Yan <502024330056@smail.nju.edu.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use "proc makedroplist" function to support combobox on legacy widgets
mode. "proc makedroplist" uses "ttk::combobox" for themed mode, and uses
"tk_optionMenu" for legacy mode to get rid of the problem.
Signed-off-by: YOKOTA Hiroshi <yokota.hgml@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Many contributors to software use a Language Server Protocol
implementation to allow their editor to learn structural information
about the code they write and provide additional features, such as
jumping to the declaration or definition of a function or type. In C,
the usual implementation is clangd, which requires compiling with clang.
Because C and C++ projects lack a standard file system layout and build
system, unlike languages such as Rust and Go, clangd requires a
compilation database to be generated by the clang compiler in order to
pass the proper compilation flags and discover all of the files
necessary to make the LSP work. This is done by setting
GENERATE_COMPILATION_DATABASE to "yes".
However, when that's enabled and the user runs "make" a second time,
all of the files are re-compiled, which is inconvenient for contributors
to Git, since it makes small changes or rebases recompile the entirety
of the codebase. This happens because the directory holding the
compilation database is updated anytime an object is built, so its
modification date will always be newer than the first object built.
To solve this, use the same trick we do just above for the .depend
directory and filter the compilation database directory out if it
already exists, which avoids making it a target to be built.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It has been reported that "git rebase --rebase-merges" can create
corrupted reflog entries like
e9c962f2ea0 HEAD@{8}: <binary>�: Merged in <branch> (pull request #4441)
This is due to a use-after-free bug that happens because
reflog_message() uses a static `struct strbuf` and is not called to
update the current reflog message stored in `ctx->reflog_message` when
creating the merge. This means `ctx->reflog_message` points to a stale
reflog message that has been freed by subsequent call to
reflog_message() by a command such as `reset` that used the return value
directly rather than storing the result in `ctx->reflog_message`.
Fix this by creating the reflog message nearer to where the commit is
created and storing it in a local variable which is passed as an
additional parameter to run_git_commit() rather than storing the message
in `struct replay_ctx`. This makes it harder to forget to call
`reflog_message()` before creating a commit and using a variable with a
narrower scope means that a stale value cannot carried across a from one
iteration of the loop to the next which should prevent any similar
use-after-free bugs in the future.
A existing test is modified to demonstrate that merges are now created
with the correct reflog message.
Reported-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the next commit these functions will be called from pick_one_commit()
so move them above that function to avoid a forward declaration.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'master' of https://github.com/j6t/gitk:
gitk: add Tamil translation
gitk: limit PATH search to bare executable names
gitk: _search_exe is no longer needed
gitk: override $PATH search only on Windows
gitk: adjust indentation to match the style used in this script
|
|
* 'master' of https://github.com/j6t/git-gui:
git-gui: treat the message template file as a built file
git-gui: heed core.commentChar/commentString
git-gui: po/README: update repository location and maintainer
|
|
* js/po-update-workflow:
git-gui: treat the message template file as a built file
git-gui: po/README: update repository location and maintainer
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
* at/translation-tamil:
gitk: add Tamil translation
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Work around false positive given by CodeQL.
* js/diff-codeql-false-positive-workaround:
diff: check range before dereferencing an array element
|
|
"git mv a a/b dst" would ask to move the directory 'a' itself, as
well as its contents, in a single destination directory, which is
a contradicting request that is impossible to satisfy. This case is
now detected and the command errors out.
* ps/mv-contradiction-fix:
builtin/mv: convert assert(3p) into `BUG()`
builtin/mv: bail out when trying to move child and its parent
|
|
hashmap API clean-up to ensure hashmap_clear() leaves a cleared map
in a reusable state.
* en/hashmap-clear-fix:
hashmap: ensure hashmaps are reusable after hashmap_clear()
|
|
This commit adds the `git-credential-outlook` and `git-credential-gmail`
helpers to the list of OAuth helpers.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
OAuth2.0 is a new authentication method that is being used by many email
providers, including Outlook and Gmail. Recently, the Authen::SASL perl
module has been updated to support OAuth2.0 authentication, thus making
the git-send-email script be able to use this authentication method as
well. So lets improve the documentation to reflect this change.
I also had a hard time finding a reliable OAuth2.0 access token
generator for Outlook and Gmail. So I added a link to the such
generators which I developed myself after seaching through lots of code
and API documentation to make things easier for others.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current implementation of a valid Fully Qualified Domain Name
is not that strict. It just checks whether it has a dot (.) and
if using macOS, it should not end with .local. As per RFC1035[1],
from what I understood, the following checks need to be done:
- The domain must contain atleast one dot
- Each label (separated by dots) must be 1-63 characters long
- Labels must start and end with an alphanumeric character
- Labels can contain alphanumeric characters and hyphens
Here are some examples of valid and invalid labels:
'example.com', # Valid
'sub.example.com', # Valid
'my-domain.org', # Valid
'localhost', # Invalid (no dot)
'MacBook..', # Invalid (double dots)
'-example.com', # Invalid (starts with a hyphen)
'example-.com', # Invalid (ends with a hyphen)
'example..com', # Invalid (double dots)
'example', # Invalid (no TLD)
'example.local', # Invalid on macOS
'valid-domain.co.uk', # Valid
'123.example.com', # Valid
'example.com.', # Invalid (trailing dot)
'toolonglabeltoolonglabeltoolonglabeltoolonglabeltoolonglabeltoolonglabel.com', # Invalid (label > 63 chars)
Due to current implementation, I was not able to send emails from
Ubuntu. Upon debugging, I found that the SMTP domain being passed
to Outlook's servers was not valid.
Net::SMTP=GLOB(0x5db4351225f8)>>> EHLO MacBook..
Net::SMTP=GLOB(0x5db4351225f8)<<< 501 5.5.4 Invalid domain name
Net::SMTP=GLOB(0x5db4351225f8)>>> HELO MacBook..
Notice that an invalid domain name "MacBook.." is sent by git-send-email.
We have a fallback code that checks output from Net::Domain::domainname()
or asking domain method of an Net::SMTP instance to detect a misconfigured
hostname and replace it with fallback "localhost.localdomain", but the
valid_fqdn apparently is failing to say "MacBook.." is not a valid fqdn.
With this patch, the rule used in valid_fqdn is tightened, the beginning
part of the SMTP exchange looked like this:
Net::SMTP=GLOB(0x58c8af71e930)>>> EHLO localhost.localdomain
Net::SMTP=GLOB(0x58c8af71e930)<<< 250-PN4P287CA0064.outlook.office365.com Hello
[1]: https://datatracker.ietf.org/doc/html/rfc1035
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some distros, notably Fedora, want to install non-core Perl libraries
into specific directory, namely /usr/share/perl5/vendor_perl.
The Makefile build system allows this by overriding perllibdir variable,
let's make meson works on par with our Makefile.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When users want to enable the latest and greatest configuration options
recommended by Scalar after a Git upgrade, 'scalar reconfigure --all' is
a great option that iterates over all repos in the multi-valued
'scalar.repos' config key.
However, this feature previously forced users to enable background
maintenance. In some environments this is not preferred.
Add a new --maintenance=<mode> option to 'scalar reconfigure' that
provides options for enabling (default), disabling, or leaving
background maintenance config as-is.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating a new enlistment via 'scalar clone', the default is to set
up situations that work for most user scenarios. Background maintenance
is one of those highly-recommended options for most users.
However, when using 'scalar clone' to create an enlistment in a
different situation, such as prepping a VM image, it may be valuable to
disable background maintenance so the manual maintenance steps do not
get blocked by concurrent background maintenance activities.
Add a new --no-maintenance option to 'scalar clone'.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When registering a repository with Scalar to get the latest opinionated
configuration, the 'scalar register' command will also set up background
maintenance. This is a recommended feature for most user scenarios.
However, this is not always recommended in some scenarios where
background modifications may interfere with foreground activities.
Specifically, setting up a clone for use in automation may require doing
certain maintenance steps in the foreground that could become blocked by
concurrent background maintenance operations.
Allow the user to specify --no-maintenance to 'scalar register'. This
requires updating the method prototype for register_dir(), so use the
default of enabling this value when otherwise specified.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In advance of adding a --[no-]maintenance option to several 'scalar'
subcommands, extend the register_dir() method to include an option for
how it should handle background maintenance.
It's important that we understand the context of toggle_maintenance()
that will enable _or disable_ maintenance depending on its input value.
Add a doc comment with this information.
Similarly, update register_dir() to either enable maintenance or leave
it alone.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Follow the lead of 5377abc0c9d5 ("po/git.pot: don't check in result
of "make pot"", 2022-05-26) in the Git repository and do not track
git-gui.pot anymore.
Instead, translators are expected to integrate an up-to-date version
from the master branch into their translation file using
make ALL_POFILES=po/xx.po update-po
Update README to describe the new process. It is now understood that
different translations need not be based on the same message template
file, but rather individual translators should base their translation
on the most up-to-date code. Remove the section that addresses the
i18n coordinator as it does not apply when no common base is required
among translators.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
While git-gc(1) knows to garbage collect the rerere cache,
git-maintenance(1) does not yet have a task for this cleanup. Introduce
a new "rerere-gc" task to plug this gap.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a subsequent commit we are going to introduce a new "rerere-gc" task
for git-maintenance(1). To prepare for this, refactor the code that
spawns `git rerere gc` into a separate function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While git-gc(1) knows to prune stale worktrees, git-maintenance(1) does
not yet have a task for this cleanup. Introduce a new "worktree-prune"
task to plug this gap.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a subsequent commit we will introduce a new "worktree-prune" task for
git-maintenance(1). To prepare for this, refactor the code that spawns
`git worktree prune` into a separate function.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use a couple of global variables to assemble command line arguments
for subprocesses we execute in git-gc(1). All of these variables except
the one for git-repack(1) are only used in a single place though, so
they don't really add anything but confusion.
Remove those variables.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The parameters of `cmd_gc()` aren't indented properly. Fix this.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Compiling/linking 82e79c63642c on an older MacOs machine (like Xcode
14.3.1, the last version of 14.x series) leads to this:
Undefined symbols for architecture x86_64:
"_false_but_the_compiler_does_not_know_it_", referenced from:
_start_command in libgit.a(run-command.o)
The linker fails to pick up compiler-tricks/not-constant.o that
defines the needed false_but_the_compiler_does_not_know_it_ symbol,
which is the only thing defined in that object file, from the
libgit.a archive.
Initializing the variable explicitly to 0 works around the linker
bug; the symbol type changes from 'C' to 'S' and is picked up by the
linker.
Xcode 15 introduces a new linker, which seems to fix the bug, making
the workaround here unnecessary, and Apple requires to build with
Xcode 16 or later in order to upload to their App Store Connect
since April 24, 2025, but not everybody is expected to upgrade their
toolchain immediately.
Helped-by: Koji Nakamaru <koji.nakamaru@gree.net>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: தமிழ் நேரம் <anishprabu.t@gmail.com>
|
