| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The "git_istream" abstraction has been revamped to make it easier
to interface with pluggable object database design.
* ps/object-read-stream:
streaming: drop redundant type and size pointers
streaming: move into object database subsystem
streaming: refactor interface to be object-database-centric
streaming: move logic to read packed objects streams into backend
streaming: move logic to read loose objects streams into backend
streaming: make the `odb_read_stream` definition public
streaming: get rid of `the_repository`
streaming: rely on object sources to create object stream
packfile: introduce function to read object info from a store
streaming: move zlib stream into backends
streaming: create structure for filtered object streams
streaming: create structure for packed object streams
streaming: create structure for loose object streams
streaming: create structure for in-core object streams
streaming: allocate stream inside the backend-specific logic
streaming: explicitly pass packfile info when streaming a packed object
streaming: propagate final object type via the stream
streaming: drop the `open()` callback function
streaming: rename `git_istream` into `odb_read_stream`
|
|
Copy detection cannot work when comparing the index to the working tree
because Git ignores files that it is not explicitly told to track. It
should work in the other direction, though, i.e. for a reverse diff of
the deletion of a copy from the index.
d1f2d7e8ca (Make run_diff_index() use unpack_trees(), not read_tree(),
2008-01-19) broke it with a seemingly stray change to run_diff_files().
We didn't notice because there's no test for that. But even if we had
one, it might have gone unnoticed because the breakage only happens
with index preloading, which requires at least 1000 entries (more than
most test repos have) and is racy because it runs in parallel with the
actual command.
Fix copy detection by queuing up-to-date and skip-worktree entries using
diff_same().
While at it, use diff_same() also for queuing unchanged files not
flagged as up-to-date, i.e. clean submodules and entries where
preloading was not done at all or not quickly enough. It uses less
memory than diff_change() and doesn't unnecessarily set the diff flag
has_changes.
Add two tests to cover running both without and with preloading. The
first one passes reliably with the original code. The second one
enables preloading and thus is racy. It has a good chance to pass even
without the fix, but fails within seconds when running the test script
with --stress. With the fix it runs fine for several minutes, until
my patience runs out.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rs/diff-files-r-find-copies-fix
* rs/diff-index-find-copies-harder-optim:
diff-index: don't queue unchanged filepairs with diff_change()
|
|
When using the --filter option for git-rev-list(1), objects that are
explicitly provided ignore filters and are always printed unless the
--filter-provided-objects option is also specified. Clarify this
behavior in the documentation.
Signed-off-by: Justin Tobler <jltobler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add user-facing documentation that justifies the values being set by
'scalar clone', 'scalar register', and 'scalar reconfigure'.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ps/object-read-stream:
streaming: drop redundant type and size pointers
streaming: move into object database subsystem
streaming: refactor interface to be object-database-centric
streaming: move logic to read packed objects streams into backend
streaming: move logic to read loose objects streams into backend
streaming: make the `odb_read_stream` definition public
streaming: get rid of `the_repository`
streaming: rely on object sources to create object stream
packfile: introduce function to read object info from a store
streaming: move zlib stream into backends
streaming: create structure for filtered object streams
streaming: create structure for packed object streams
streaming: create structure for loose object streams
streaming: create structure for in-core object streams
streaming: allocate stream inside the backend-specific logic
streaming: explicitly pass packfile info when streaming a packed object
streaming: propagate final object type via the stream
streaming: drop the `open()` callback function
streaming: rename `git_istream` into `odb_read_stream`
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Docfix.
* je/doc-data-model:
doc: remove stray text in Git data model
|
|
"git repo struct" learned to take "-z" as a synonym to "--format=nul".
* lo/repo-struct-z:
repo: add -z as an alias for --format=nul to git-repo-structure
repo: use [--format=... | -z] instead of [-z] in git-repo-info synopsis
repo: remove blank line from Documentation/git-repo.adoc
|
|
A help message from "git branch" now mentions "git help" instead of
"man" when suggesting to read some documentation.
* kh/advise-w-git-help-in-branch:
branch: advice using git-help(1) instead of man(1)
|
|
Doc fixup.
* je/doc-pull:
doc: git-pull: fix 'git --rebase abort' typo
|
|
Build fix.
* tc/meson-cross-compile-fix:
meson: use is_cross_build() where possible
meson: only detect ICONV_OMITS_BOM if possible
meson: ignore subprojects/.wraplock
|
|
"git last-modified" used to mishandle "--" to mark the beginning of
pathspec, which has been corrected.
* js/last-modified-with-sparse-checkouts:
last-modified: support sparse checkouts
|
|
Halve the memory consumed by artificial filepairs created during
"git diff --find-copioes-harder", also making the operation run
faster.
* rs/diff-index-find-copies-harder-optim:
diff-index: don't queue unchanged filepairs with diff_change()
|
|
Recent optimization to "last-modified" command introduced use of
uninitialized block of memory, which has been corrected.
* tc/last-modified-active-paths-optimization:
last-modified: fix use of uninitialized memory
|
|
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no documentation for `--contained`.
Start by copying the text from `replay_options` in `builtin/
replay.c`. But some people think that the existing text is a
bit unclear; what does it mean for a branch to be contained
in a revision range? Let’s include the implied commits here:
the branches that point at commits in the range.
Also use “update” instead of “advance”. “Update” is the verb
commonly used in this context.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some commands will produce output on stderr if there are conflicts, but
git-replay(1) is completely silent. Explicitly spell that out.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git --version reports its version with the prefix "git version ".
Remove precisely this string instead of everything up to and including
the rightmost space to avoid butchering version strings that contain
spaces. This helps Apple's release of Git, which reports its version
like this: "git version 2.50.1 (Apple Git-155)".
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Existing code in files that have been fairly stable trigger the
"make coccicheck" suggestions due to the new check.
Rewrite them to use MEMZERO_ARRAY()
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Telling the user "you got some error messages" without showing what
the errors are is almost useless in CI environment, as the errors
cannot be examined without downloading build artifacts.
Arrange it to spew out the output when it fails.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tc/memzero-array:
contrib/coccinelle: pass include paths to spatch(1)
git-compat-util: introduce MEMZERO_ARRAY() macro
last-modified: fix use of uninitialized memory
|
|
The config values set by Scalar went through an audit in the previous
changes, so now reorganize the settings and simplify their purpose.
First, alphabetize the config options, except put the platform-specific
options at the end. This groups two Windows-specific settings and only
one non-Windows setting.
Also, this removes the 'overwrite_on_reconfigure' setting for many of
these options. That setting made nearly all of these options "required"
for scalar enlistments, restricting use for users. Instead, now nearly
all options have removed this setting.
However, there is one setting that still has this, which is
index.skipHash, which was previously being set to _false_ when we
actually prefer the value of true. Keep the overwrite here to help
Scalar users upgrade to the new version. We may remove that overwrite in
the future once we belive that most of the users who have the false
value have upgraded to a version that overwrites that to 'true'.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These config values were added in the original Scalar contribution,
d0feac4e8c (scalar: 'register' sets recommended config and starts
maintenance, 2021-12-03), but were never fully checked for validity in
the upstream Git project. At the time, Scalar was only intended for the
contrib/ directory so did not have as rigorous of an investigation.
Each config option has its own justification for removal:
* core.preloadIndex: This value is true by default, now. Removing this
causes some changes required to the tests that checked this config
value. Use gui.gcwarning=false instead.
* core.fscache: This config does not exist in the core Git project, but
is instead a config option for a Git for Windows feature.
* core.multiPackIndex: This config value is now enabled by default, so
does not need to be called out specifically. It was originally
included to make sure the background maintenance that created
multi-pack-indexes would result in the expected performance
improvements.
* credential.validate: This option is not something specific to Git but
instead an older version of Git Credential Manager for Windows. That
software was replaced several years ago by the cross-platform Git
Credential Manger so this option is no longer needed to help users who
were on that older software.
* pack.useSparse=true: This value is now Git's default as of de3a864114
(config: set pack.useSparse=true by default, 2020-03-20) so we don't
need it set by Scalar.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The index.skipHash config option has been set to 'false' by Scalar since
4933152cbb (scalar: enable path-walk during push via config, 2025-05-16)
but that commit message is trying to communicate the exact opposite:
that the 'true' value is what we want instead. This means that we've
been disabling this performance benefit for Scalar repos
unintentionally.
Fix this issue before we add justification for the config options set in
this list.
Oddly, enabling index.skipHash causes a test issue during 'test_commit'
in one of the Scalar tests when GIT_TEST_SPLIT_INDEX is enabled (as
caught by the linux-test-vars build). I'm fixing the test by disabling
the environment variable, but the issue should be resolved in a series
focused on the split index.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A repo may have config options set by 'scalar clone' or 'scalar
register' and then updated by 'scalar reconfigure'. It can be helpful to
point out which of those options were set by the latest scalar
recommendations.
Add "# set by scalar" to the end of each config option to assist users
in identifying why these config options were set in their repo. Use a new
helper method to simplify the two callsites.
Co-authored-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unless there are good reasons, it is customary to have the options[]
array used with the parse-options API declared in function scope rather
than at file scope.
Move builtin/pull.c:cmd_pull()’s options[] array into the function to
match that convention.
Signed-off-by: K Jayatheerth <jayatheerthkulkarni2005@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before C99 syntax to express that the final member in a struct is an
array of unknown number of elements, i.e.,
struct {
...
T flexible_array[];
};
came along, GNU introduced their own extension to declare such a
member with 0 size, i.e.,
T flexible_array[0];
and the compilers that did not understand even that were given a way
to emulate it by wasting one element, i.e.,
T flexible_array[1];
As we are using more and more C99 language features, let's see if
the platforms that still need to resort to the historical forms of
flexible array member support are still there, by forcing all the
flex array definitions to use the C99 syntax and see if anybody
screams (in which case reverting the changes is rather easy).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cmd_replay() aborts if the pointer "onto" is NULL after argument
parsing, e.g. when specifying a non-existing commit with --onto.
15cd4ef1f4 (replay: make atomic ref updates the default behavior,
2025-11-06) added code that dereferences this pointer before the check.
Switch their places to avoid a segmentation fault.
Reported-by: Kristoffer Haugsbakk <kristofferhaugsbakk@fastmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sa/replay-atomic-ref-updates:
replay: add replay.refAction config option
replay: make atomic ref updates the default behavior
replay: use die_for_incompatible_opt2() for option validation
|
|
Since Aug 2006, the DarwinPorts project renamed themselves as
MacPorts. Those who are not intimately familiar with the Opensource
ecosystem around macOS from olden days, the name DarwinPorts may not
ring a bell, even when they are using MacPorts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor writing of alternates so that the actual business logic is
structured around the object database source we want to write the
alternate to. Same as with the preceding commit, this will eventually
allow us to have different logic for writing alternates depending on the
backend used.
Note that after the refactoring we start to call
`odb_add_alternate_recursively()` unconditionally. This is fine though
as we know to skip adding sources that are tracked already.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adapt how we read alternates so that the interface is structured around
the object database source we're reading from. This will eventually
allow us to abstract away this behaviour with pluggable object databases
so that every format can have its own mechanism for listing alternates.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have removed the mutual recursion in the preceding commit
it is not necessary anymore to have a forward declaration of the
`read_info_alternates()` function. Move the function and its
dependencies further up so that we can remove it.
Note that this commit also removes the function documentation of
`read_info_alternates()`. It's unclear what it's documenting, but it for
sure isn't documenting the modern behaviour of the function anymore.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When adding an alternative object database source we not only have to
consider the added source itself, but we also have to add _its_ sources
to our database. We implement this via mutual recursion:
1. We first call `link_alt_odb_entries()`.
2. `link_alt_odb_entries()` calls `parse_alternates()`.
3. We then add each alternate via `odb_add_alternate_recursively()`.
4. `odb_add_alternate_recursively()` calls `link_alt_odb_entries()`
again.
This flow is somewhat hard to follow, but more importantly it means that
parsing of alternates is somewhat tied to the recursive behaviour.
Refactor the function to remove the mutual recursion between adding
sources and parsing alternates. The parsing step thus becomes completely
oblivious to the fact that there is recursive behaviour going on at all.
The recursion is handled by `odb_add_alternate_recursively()` instead,
which now recurses with itself.
This refactoring allows us to move parsing of alternates into object
database sources in a subsequent step.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When calling `odb_add_to_alternates_file()` we know to add the newly
added source to the object database in case we have already loaded
alternates. This is done so that we can make its objects accessible
immediately without having to fully reload all alternates.
The way we do this though is to call `link_alt_odb_entries()`, which
adds _multiple_ sources to the object database source in case we have
newline-separated entries. This behaviour is not documented in the
function documentation of `odb_add_to_alternates_file()`, and all
callers only ever pass a single directory to it. It's thus entirely
surprising and a conceptual mismatch.
Fix this issue by directly calling `odb_add_alternate_recursively()`
instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `alt_odb_usable()` receives as input the object database,
the path it's supposed to determine usability for as well as the
normalized path of the main object directory of the repository. The last
part is derived by the function's caller from the object database. As we
already pass the object database to `alt_odb_usable()` it is redundant
information.
Drop the extra parameter and compute the normalized object directory in
the function itself.
While at it, rename the function to `odb_is_source_usable()` to align it
with modern terminology.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parsing alternates and resolving potential relative paths is currently
handled in two separate steps. This has the effect that the logic to
retrieve alternates is not entirely self-contained. We want it to be
just that though so that we can eventually move the logic to list
alternates into the `struct odb_source`.
Move the logic to resolve relative alternative paths into
`parse_alternates()`. Besides bringing us a step closer towards the
above goal, it also neatly separates concerns of generating the list of
alternatives and linking them into the object database.
Note that we ignore any errors when the relative path cannot be
resolved. This isn't really a change in behaviour though: if the path
cannot be resolved to a directory then `alt_odb_usable()` still knows to
bail out.
While at it, rename the function to `odb_add_alternate_recursively()` to
more clearly indicate what its intent is and to align it with modern
terminology.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parsing of the alternates file and environment variable is currently
split up across multiple different functions and is entangled with
`link_alt_odb_entries()`, which is responsible for linking the parsed
object database sources. This results in two downsides:
- We have mutual recursion between parsing alternates and linking them
into the object database. This is because we also parse alternates
that the newly added sources may have.
- We mix up the actual logic to parse the data and to link them into
place.
Refactor the logic so that parsing of the alternates file is entirely
self-contained. Note that this doesn't yet fix the above two issues, but
it is a necessary step to get there.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous commit a new coccinelle rule is added. But neiter
`make coccicheck` nor `meson compile coccicheck` did detect a case in
builtin/last-modified.c.
This case involves the field `scratch` in `struct last_modified`. This
field is of type `struct bitmap` and that struct has a member
`eword_t *words`. Both are defined in `ewah/ewok.h`. Now, while
builtin/last-modified.c does include that header (with the subdir in the
#include directive), it seems coccinelle does not process it. So it's
unaware of the type of `words` in the bitmap, and it doesn't recognize
the rule from previous commit that uses:
type T;
T *ptr;
Fix coccicheck by passing all possible include paths inside the Git
project so spatch(1) can find the headers and can determine the types.
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new macro MEMZERO_ARRAY() that zeroes the memory allocated
by ALLOC_ARRAY() and friends. And add coccinelle rule to enforce the use
of this macro.
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tc/last-modified-active-paths-optimization:
last-modified: fix use of uninitialized memory
|
|
In `write_midx_internal()` we know to skip rewriting the multi-pack
index in case the existing one already covers all packs. This logic does
not know to handle `git multi-pack-index write --stdin-packs` though, so
we end up always rewriting the MIDX in this case even if the MIDX would
not change.
With our default maintenance strategy this isn't really much of a
problem, as git-gc(1) does not use the "--stdin-packs" option. But that
is changing with geometric repacking, where "--stdin-packs" is used to
explicitly select the packfiles part of the geometric sequence.
This issue can be demonstrated trivially with a benchmark in the Git
repository: executing `git repack --geometric=2 --write-midx -d` in the
Git repository takes more than 3 seconds only to end up with the same
multi-pack index as we already had before.
The logic that decides if we need to rewrite the MIDX only checks
whether the number of packfiles covered will change. That check is of
course too lenient for "--stdin-packs", as it could happen that we want
to cover a different-but-same-size set of packfiles. But there is no
inherent reason why we cannot handle "--stdin-packs".
Improve the logic to not only check for the number of packs, but to also
verify that we are asked to generate a MIDX for the _same_ packs. This
allows us to also skip no-op rewrites for "--stdin-packs".
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `write_midx_internal()` we know to skip writing the new multi-pack
index in case it would be the same as the existing one. This logic does
not handle the `--stdin-packs` option yet though, so we end up always
rewriting the MIDX if that option is passed to us.
Extract the logic to decide whether or not to rewrite the MIDX into a
separate function. This will allow us to extend that feature in the next
commit to address the above issue.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `midx_preferred_pack()` returns the preferred pack for a
given multi-pack index. To compute the preferred pack we:
1. Take the first position indexed by the MIDX in pseudo-pack order.
2. Convert this pseudo-pack position into the MIDX position.
3. We then look up the pack that corresponds to this MIDX position.
This reliably returns the preferred pack given that all of its contained
objects will be up front in pseudo-pack order.
The second step that turns the pseudo-pack order into MIDX order
requires the reverse index though, which may not exist for example when
the MIDX does not have a bitmap. And in that case one may easily hit a
bug:
BUG: ../pack-revindex.c:491: pack_pos_to_midx: reverse index not yet loaded
In theory, `midx_preferred_pack()` already knows to handle the case
where no reverse index exists, as it calls `load_midx_revindex()` before
calling into `midx_preferred_pack()`. But we only check for negative
return values there, even though the function returns a positive error
code in case the reverse index does not exist.
Fix the issue by testing for a non-zero return value instead, same as
all the other callers of this function already do. While at it, document
the return value of `load_midx_revindex()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a regression introduced with batched updates in 0e358de64a (fetch:
use batched reference updates, 2025-05-19) when fetching references. In
the `do_fetch()` function, we jump to cleanup if committing the
transaction fails, regardless of whether using batched or atomic
updates. This skips three subsequent operations:
- Update 'FETCH_HEAD' as part of `commit_fetch_head()`.
- Add upstream tracking information via `set_upstream()`.
- Setting remote 'HEAD' values when `do_set_head` is true.
For atomic updates, this is expected behavior. For batched updates,
we want to continue with these operations even if some refs fail to
update.
Skipping `commit_fetch_head()` isn't actually a regression because
'FETCH_HEAD' is already updated via `append_fetch_head()` when not
using '--atomic'. However, we add a test to validate this behavior.
Skipping the other two operations (upstream tracking and remote HEAD)
is a regression. Fix this by only jumping to cleanup when using
'--atomic', allowing batched updates to continue with post-fetch
operations. Add tests to prevent future regressions.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit 0e358de64a (fetch: use batched reference updates, 2025-05-19)
updated the 'git-fetch(1)' command to use batched updates. This batches
updates to gain performance improvements. When fetching references, each
update is added to the transaction. Finally, when committing, individual
updates are allowed to fail with reason, while the transaction itself
succeeds.
One scenario which was missed here, was fetching tags. When fetching
conflicting tags, the `fetch_and_consume_refs()` function returns '1',
which skipped committing the transaction and directly jumped to the
cleanup section. This mean that no updates were applied. This also
extends to backfilling tags which is done when fetching specific
refspecs which contains tags in their history.
Fix this by committing the transaction when we have an error code and
not using an atomic transaction. This ensures other references are
applied even when some updates fail.
The cleanup section is reached with `retcode` set in several scenarios:
- `truncate_fetch_head()`, `open_fetch_head()` and `prune_refs()` set
`retcode` before the transaction is created, so no commit is
attempted.
- `fetch_and_consume_refs()` and `backfill_tags()` are the primary
cases this fix targets, both setting a positive `retcode` to
trigger the committing of the transaction.
This simplifies error handling and ensures future modifications to
`do_fetch()` don't need special handling for batched updates.
Add tests to check for this regression. While here, add a missing
cleanup from previous test.
Reported-by: David Bohman <debohman@gmail.com>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`symref-create` should be followed `::`, not `:`. The lack of second
colon (`:`) causes it to appear as regular text (`<p>`) instead of as a
description list term (`<dt>`) in the HTML documentation.
Signed-off-by: Sam Bostock <sam@sambostock.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When is_promisor_object() is called for the first time, it lazily
initializes a set of all promisor objects by iterating through all
objects in promisor packs. For each object, add_promisor_object() calls
parse_object(), which decompresses and hashes the entire object.
For repositories with large pack files, this can take an extremely long
time. For example, on a production repository with a 176 GB promisor
pack:
$ time ~/git/git/git-rev-list --objects --all --exclude-promisor-objects --quiet
________________________________________________________
Executed in 76.10 mins fish external
usr time 72.10 mins 1.83 millis 72.10 mins
sys time 3.56 mins 0.17 millis 3.56 mins
add_promisor_object() just wants to construct the set of all promisor
objects, so it doesn't really need to verify the hash of every object.
Set PARSE_OBJECT_SKIP_HASH_CHECK to skip the hash check. This has the
side effect of skipping decompression of blob objects completely, saving
a significant amount of time:
$ time ~/git/git/git-rev-list --objects --all --exclude-promisor-objects --quiet
________________________________________________________
Executed in 124.70 secs fish external
usr time 46.94 secs 0.00 millis 46.94 secs
sys time 43.11 secs 1.03 millis 43.11 secs
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
parse_object_with_flags() has an optimization to skip parsing blobs if
PARSE_OBJECT_SKIP_HASH_CHECK is set and the object hasn't been seen
before or might be a blob but hasn't been parsed yet. The latter can
happen, for example, if add_tree_entries() walks a path that references
a blob object that hasn't been seen before: lookup_blob() marks the
referenced oid as being a blob, but does not provide any additional
information about it until it is parsed.
It's possible for an object to be created without even a type, such as
when prepare_revision_walk() uses mark_uninteresting() to mark all
promisor objects as uninteresting. These objects have obj->parsed ==
false and obj->type == OBJ_NONE.
The skip_hash optimization does not consider this kind of object, so
parse_object_with_flags() proceeds to fully parse the object to
determine its type.
Improve the optimization by applying it to OBJ_NONE objects as well as
OBJ_BLOB ones. Apply a similar fix for trees.
Fixes: 8db2dad7a045 ("parse_object(): check on-disk type of suspected blob")
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
