| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Compiling with gcc-10, -O2, and -fsanitize=undefined results in a
compiler warning:
config.c: In function ‘git_config_copy_or_rename_section_in_file’:
config.c:3170:17: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
3170 | output[0] = '\t';
| ~~~~~~~~~~^~~~~~
config.c:3076:7: note: at offset -1 to object ‘buf’ with size 1024 declared here
3076 | char buf[1024];
| ^~~
This is a false positive. The interesting lines of code are:
int i;
char *output = buf;
...
for (i = 0; buf[i] && isspace(buf[i]); i++)
; /* do nothing */
...
int offset;
offset = section_name_match(&buf[i], old_name);
if (offset > 0) {
...
output += offset + i;
if (strlen(output) > 0) {
/*
* More content means there's
* a declaration to put on the
* next line; indent with a
* tab
*/
output -= 1;
output[0] = '\t';
}
}
So we do assign output to buf initially. Later we increment it based on
"offset" and "i" and then subtract "1" from it. That latter step is what
the compiler is complaining about; it could lead to going off the left
side of the array if "output == buf" at the moment of the subtraction.
For that to be the case, then "offset + i" would have to be 0. But that
can't happen:
- we know that "offset" is at least 1, since we're in a conditional
block that checks that
- we know that "i" is not negative, since it started at 0 and only
incremented over whitespace
So the sum must be at least 1, and therefore it's OK to subtract one
from "output".
But that's not quite the whole story. Since "i" is an int, it could in
theory be possible to overflow to negative (when counting whitespace on
a very large string). But we know that's impossible because we're
counting the 1024-byte buffer we just fed to fgets(), so it can never be
larger than that.
Switching the type of "i" to "unsigned" makes the warning go away, so
let's do that.
Arguably size_t is an even better type (for this and for the other
length fields), but switching to it produces a similar but distinct
warning:
config.c: In function ‘git_config_copy_or_rename_section_in_file’:
config.c:3170:13: error: array subscript -1 is outside array bounds of ‘char[1024]’ [-Werror=array-bounds]
3170 | output[0] = '\t';
| ~~~~~~^~~
config.c:3076:7: note: while referencing ‘buf’
3076 | char buf[1024];
| ^~~
If we were to ever switch off of fgets() to strbuf_getline() or similar,
we'd probably need to use size_t to avoid other overflow problems. But
for now we know we're safe because of the small fixed size of our
buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When citing other Git commands, rather than merely formatting them with
a fixed-width typeface, improve the reader experience by linking to them
directly via `linkgit:`.
Suggested-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When reading the rendered description of `add`, it's easy to trip over
and miss the end of one sentence and the start of the next, making it
seem as if they are part of the same statement, separated only by a
dash:
... specific files such as HEAD, index, etc. - may also be
specified as <commit-ish>; it is synonymous with...
This can be particularly confusing since the thoughts expressed by the
two sentences are unrelated. Reduce the likelihood of confusion by
making it obvious that the two sentences are distinct.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a few grammatical problems to improve the reading experience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As originally composed, git-worktree.txt employed a mix of "worktree"
and "working tree" which was inconsistent and potentially confusing to
readers. bc483285b7 (Documentation/git-worktree: consistently use term
"linked working tree", 2015-07-20) undertook the task of employing the
term "working tree" consistently throughout the document and avoiding
"worktree" altogether for descriptive text. Since that time, some
instances of "worktree" have crept back in. Continue the work of
bc483285b7 by transforming these to "working tree", as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-worktree documentation generally does a good job of formatting
literal text using a fixed-width typeface, however, some instances of
unformatted literal text have crept in over time. Fix these.
While at it, also fix a few incorrect typefaces resulting from wrong
choice of Asciidoc quotes.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In b79cf959b2 (upload-pack.c: allow banning certain object filter(s),
2020-02-26), we introduced functionality to disallow certain object
filters from being chosen from within 'git upload-pack'. Traditionally,
administrators use this functionality to disallow filters that are known
to perform slowly, for e.g., those that do not have bitmap-level
filtering.
In the past, the '--filter=tree:<n>' was one such filter that does not
have bitmap-level filtering support, and so was likely to be banned by
administrators.
However, in the previous couple of commits, we introduced bitmap-level
filtering for the case when 'n' is equal to '0', i.e., as if we had a
'--filter=tree:none' choice.
While it would be sufficient to simply write
$ git config uploadpackfilter.tree.allow true
(since it would allow all values of 'n'), we would like to be able to
allow this filter for certain values of 'n', i.e., those no greater than
some pre-specified maximum.
In order to do this, introduce a new configuration key, as follows:
$ git config uploadpackfilter.tree.maxDepth <m>
where '<m>' specifies the maximum allowed value of 'n' in the filter
'tree:n'. Administrators who wish to allow for only the value '0' can
write:
$ git config uploadpackfilter.tree.allow true
$ git config uploadpackfilter.tree.maxDepth 0
which allows '--filter=tree:0', but no other values.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git clients may ask the server for a partial set of objects, where the
set of objects being requested is refined by one or more object filters.
Server administrators can configure 'git upload-pack' to allow or ban
these filters by setting the 'uploadpack.allowFilter' variable to
'true' or 'false', respectively.
However, administrators using bitmaps may wish to allow certain kinds of
object filters, but ban others. Specifically, they may wish to allow
object filters that can be optimized by the use of bitmaps, while
rejecting other object filters which aren't and represent a perceived
performance degradation (as well as an increased load factor on the
server).
Allow configuring 'git upload-pack' to support object filters on a
case-by-case basis by introducing two new configuration variables:
- 'uploadpackfilter.allow'
- 'uploadpackfilter.<kind>.allow'
where '<kind>' may be one of 'blobNone', 'blobLimit', 'tree', and so on.
Setting the second configuration variable for any valid value of
'<kind>' explicitly allows or disallows restricting that kind of object
filter.
If a client requests the object filter <kind> and the respective
configuration value is not set, 'git upload-pack' will default to the
value of 'uploadpackfilter.allow', which itself defaults to 'true' to
maintain backwards compatibility. Note that this differs from
'uploadpack.allowfilter', which controls whether or not the 'filter'
capability is advertised.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a subsequent commit, we will add configuration options that are
specific to each kind of object filter, in which case it is handy to
have a function that translates between 'enum
list_objects_filter_choice' and an appropriate configuration-friendly
string.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 508fd8e8baf3e18ee40b2cf0b8899188a8506d07.
In 6e6029a8 (fmt-merge-msg: allow merge destination to be omitted again)
we get back the behavior where merges against 'master', by default, do
not include "into 'master'" at the end of the merge message. This test
fix is no longer needed.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make it clear that the filename has only the rest of the object ID,
not the entirety of it.
Signed-off-by: Noam Yorav-Raphael <noamraph@gmail.com>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'merge' command is not the only one that does merges; other commands
like checkout -m or rebase do as well. Unfortunately, the only area of
the code that checked for the "merge.renormalize" config setting was in
builtin/merge.c, meaning it could only affect merges performed by the
"merge" command. Move the handling of this config setting to
merge_recursive_config() so that other commands can benefit from it as
well. Fixes a few tests in t6038.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t6038.11, 'cherry-pick patch from after text=auto' was a test of
undefined behavior. To make matters worse, while there are a couple
possible correct answers, this test was coded to only check for an
obviously incorrect answer. And the final cherry on top is that the
test is marked test_expect_failure, meaning it can't provide much value,
other than possibly confusing future folks who come along and try to
work on attributes and look at existing tests. Because of all these
problems, just remove the test.
But for any future code spelunkers, here's my understanding of the two
possible correct answers:
This test was set up so that on a branch with no .gitattributes file,
you cherry-picked a patch from a branch that had a .gitattributes file
(containing '* text=auto'). Further, the two branches had a file which
differed only in line endings. In this situation, correct behavior is
not well defined: should the .gitattributes file affect the merge or
not?
If the .gitattributes file on the other branch should not affect the
merge, then we would have a content conflict with all three stages
different (the merge base didn't match either side).
If the .gitattributes file from the other branch should affect the
merge, then we would expect the line endings to be normalized to LF for
the version to be recorded in the repository. This would mean that when
doing a three-way content merge on the file that differed in line
endings, that the three-way content merge would see that the versions on
both sides matched and so the cherry-pick has no conflicts and can
succeed. The line endings in the file as recorded in the repository
will change from CRLF to LF. The version checked out in the working
copy will depend on the platform (since there's no eol attribute defined
for the file).
Also, as a final side note, this test expected an error message that was
built assuming cherry-pick was the old scripted version, because
cherry-pick no longer uses the error message that was encoded in this
test. So it was wrong for yet another reason.
Given that the handling of .gitattributes is not well defined and this
test was obviously broken and could do nothing but confuse future
readers, just remove it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t6038 had a pair of tests that were expected to fail, but weren't
failing for the expected reason. Both were meant to do a merge that
could be done cleanly after renormalization, but were supposed to fail
for lack of renormalization. Unfortunately, both tests had staged
changes, and checkout -m would abort due to the presence of those staged
changes before even attempting a merge.
Fix this first issue by utilizing git-restore instead of git-checkout,
so that the index is left alone and just the working directory gets the
changes we want.
However, there is a second issue with these tests. Technically, they
just wanted to verify that after renormalization, no conflicts would be
present. This could have been checked for by grepping for a lack of
conflict markers, but the test instead tried to compare the working
directory files to an expected result. Unfortunately, the setting of
"text=auto" without setting core.eol to any value meant that the content
of the file (in particular, the line endings) would be
platform-dependent and the tests could only pass on some platforms.
Replace the existing comparison with a call to 'git diff --no-index
--ignore-cr-at-eol' to verify that the contents, other than possible
carriage returns in the file, match the expected results and in
particular that the file has no conflicts from the checkout -m
operation.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Write the hexadecimal object ID directly into the destination buffer
using oid_to_hex_r() instead of writing it into a static buffer first
using oid_to_hex() and then copying it from there using memcpy().
This is shorter, simpler and a bit more efficient.
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commits 7c0a6c8e47 ("merge-recursive: move some definitions around to
clean up the header", 2019-08-17), and b4db8a2b76 ("merge-recursive:
remove useless parameter in merge_trees()", 2019-08-17) added some
useful documentation to the functions, but had a few places where the
new comments were unclear or even misleading. Fix those comments.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use
printf '\0'
to generate a NUL byte which we then `dd` into the packfile to ensure
that we modify the first byte of the first object, thereby
(probabilistically) invalidating the checksum. Except the single quotes
we're using are interpreted to match with the ones we enclose the whole
test in. So we actually execute
printf \0
and end up injecting the ASCII code for "0", 0x30, instead.
The comment right above this `printf` invocation says that "at least one
of [the type bits] is not zero, so setting the first byte to 0 is
sufficient". Substituting "0x30" for "0" in that comment won't do: we'd
need to reason about which bits go where and just what the packfile
looks like that we're modifying in this test.
Let's avoid all of that by actually executing
printf "\0"
to generate a NUL byte, as intended.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A couple of brown-paper-bag fixes, plus the other "The branch
'master' no longer is special" fix.
Now we are ready to rewind 'next'.
|
|
Brown-paper-bag fix.
* cc/pretty-contents-size:
t6300: fix issues related to %(contents:size)
|
|
Brown-paper-bag fix.
* hn/reftable:
refs: move the logic to add \t to reflog to the files backend
|
|
"git merge" learned to selectively omit " into <branch>" at the end
of the title of default merge message with merge.suppressDest
configuration.
* jc/fmt-merge-msg-suppress-destination:
fmt-merge-msg: allow merge destination to be omitted again
Revert "fmt-merge-msg: stop treating `master` specially"
|
|
In order for "git-worktree list" to present consistent results,
get_main_worktree() performs manual normalization on the repository
path (returned by get_common_dir()) after passing it through
strbuf_add_absolute_path(). In particular, it cleans up the path for
three distinct cases when the current working directory is (1) the main
worktree, (2) the .git/ subdirectory, or (3) a bare repository.
The need for such special-cases is a direct consequence of employing
strbuf_add_absolute_path() which, for the sake of efficiency, doesn't
bother normalizing the path (such as folding out redundant path
components) after making it absolute. Lack of normalization is not
typically a problem since redundant path elements make no difference
when working with paths at the filesystem level. However, when preparing
paths for presentation, possible redundant path components make it
difficult to ensure consistency.
Eliminate the need for these special cases by instead making the path
absolute via strbuf_add_real_path() which normalizes the path for us.
Once normalized, the only case we need to handle manually is converting
it to the path of the main worktree by stripping the "/.git" suffix.
This stripping of the "/.git" suffix is a regular idiom in
worktree-related code; for instance, it is employed by
get_linked_worktree(), as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The content of .git/worktrees/<id>/gitdir must be a path of the form
"/path/to/worktree/.git". Any other content would be indicative of a
corrupt "gitdir" file. To determine the path of the worktree itself one
merely strips the "/.git" suffix, and this is indeed how the worktree
path was determined from inception.
However, 5193490442 (worktree: add a function to get worktree details,
2015-10-08) extended the path manipulation in a mysterious way. If it is
unable to strip "/.git" from the path, then it instead reports the
current working directory as the linked worktree's path:
if (!strbuf_strip_suffix(&worktree_path, "/.git")) {
strbuf_reset(&worktree_path);
strbuf_add_absolute_path(&worktree_path, ".");
strbuf_strip_suffix(&worktree_path, "/.");
}
This logic is clearly bogus; it can never be generally correct behavior.
It materialized out of thin air in 5193490442 with neither explanation
nor tests to illustrate a case in which it would be desirable.
It's possible that this logic was introduced to somehow deal with a
corrupt "gitdir" file, so that it returns _some_ sort of meaningful
value, but returning the current working directory is not helpful. In
fact, it is quite misleading (except in the one specific case when the
current directory is the worktree whose "gitdir" entry is corrupt).
Moreover, reporting the corrupt value to the user, rather than fibbing
about it and hiding it outright, is more helpful since it may aid in
diagnosing the problem.
Therefore, drop this bogus path munging and restore the logic to the
original behavior of merely stripping "/.git".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This code has been unused since fa099d2322 (worktree.c: kill parse_ref()
in favor of refs_resolve_ref_unsafe(), 2017-04-24), so drop it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The content of this strbuf is unconditionally detached several lines
before the strbuf_release() and the strbuf is never touched again after
that point.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
b6839fda68 (ref-filter: add support for %(contents:size), 2020-07-16)
added a new format for ref-filter, and added a function to generate
tests for this new feature in t6300. Unfortunately, it tries to run
`test_expect_sucess' instead of `test_expect_success', and writes
$expect to `expected', but tries to read `expect'. Those two issues
were probably unnoticed because the script only printed errors, but did
not crash. This fixes these issues.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
523fa69c (reflog: cleanse messages in the refs.c layer, 2020-07-10)
centralized reflog normalizaton. However, the normalizaton added a
leading "\t" to the message. This is an artifact of the reflog
storage format in the files backend, so it should be added there.
Routines that parse back the reflog (such as grab_nth_branch_switch)
expect the "\t" to not be in the message, so without this fix, git
with reftable cannot process the "@{-1}" syntax.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Doc update.
* jb/doc-packfile-name:
pack-write/docs: update regarding pack naming
|
|
CI fixup---tests of Python scripts didn't use the version of Git
that is being tested.
* sg/ci-git-path-fix-with-pyenv:
ci: use absolute PYTHON_PATH in the Linux jobs
|
|
* en/typofixes:
hashmap: fix typo in usage docs
Remove doubled words in various comments
|
|
* rs/grep-simpler-parse-object-or-die-call:
grep: avoid using oid_to_hex() with parse_object_or_die()
|
|
* ar/help-guides-doc:
git-help.txt: fix mentions of option --guides
|
|
* sk/typofixes:
comment: fix spelling mistakes inside comments
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix to a regression introduced during 2.27 cycle.
* en/fill-directory-exponential:
dir: check pathspecs before returning `path_excluded`
|
|
"git mv src dst", when src is an unmerged path, errored out
correctly but with an incorrect error message to claim that src is
not tracked, which has been clarified.
* ct/mv-unmerged-path-error:
git-mv: improve error message for conflicted file
|
|
Pushing a ref whose name contains non-ASCII character with the
"--force-with-lease" option did not work over smart HTTP protocol,
which has been corrected.
* bc/push-cas-cquoted-refname:
remote-curl: make --force-with-lease work with non-ASCII ref names
|
|
"git for-each-ref --format=<>" learned %(contents:size).
* cc/pretty-contents-size:
ref-filter: add support for %(contents:size)
t6300: test refs pointing to tree and blob
Documentation: clarify %(contents:XXXX) doc
|
|
Fix to an ancient bug caused by an over-eager attempt for
optimization.
* rs/add-index-entry-optim-fix:
read-cache: remove bogus shortcut
|
|
Fetching from a lazily cloned repository resulted at the server
side in attempts to lazy fetch objects that the client side has,
many of which will not be available from the third-party anyway.
* jt/avoid-lazy-fetching-upon-have-check:
upload-pack: do not lazy-fetch "have" objects
|
|
Dev support to limit the use of test_must_fail to only git commands.
* dl/test-must-fail-fixes-6:
test-lib-functions: restrict test_must_fail usage
t9400: don't use test_must_fail with cvs
t9834: remove use of `test_might_fail p4`
t7107: don't use test_must_fail()
t5324: reorder `run_with_limited_open_files test_might_fail`
t3701: stop using `env` in force_color()
|
|
With the base fix to 2.27 regresion, any new extensions in a v0
repository would still be silently honored, which is not quite
right. Instead, complain and die loudly.
* jk/reject-newer-extensions-in-v0:
verify_repository_format(): complain about new extensions in v0 repo
|
|
Preliminary clean-up of the refs API in preparation for adding a
new refs backend "reftable".
* hn/reftable:
reflog: cleanse messages in the refs.c layer
bisect: treat BISECT_HEAD as a pseudo ref
t3432: use git-reflog to inspect the reflog for HEAD
lib-t6000.sh: write tag using git-update-ref
|
|
"git clone --separate-git-dir=$elsewhere" used to stomp on the
contents of the existing directory $elsewhere, which has been
taught to fail when $elsewhere is not an empty directory.
* bw/fail-cloning-into-non-empty:
git clone: don't clone into non-empty directory
|
|
"git help log" has been enhanced by sharing more material from the
documentation for the underlying "git rev-list" command.
* pb/log-rev-list-doc:
git-log.txt: include rev-list-description.txt
git-rev-list.txt: move description to separate file
git-rev-list.txt: tweak wording in set operations
git-rev-list.txt: fix Asciidoc syntax
revisions.txt: describe 'rev1 rev2 ...' meaning for ranges
git-log.txt: add links to 'rev-list' and 'diff' docs
|
|
The test framework has been updated so that most tests will run
with predictable (artificial) timestamps.
* jk/tests-timestamp-fix:
t9100: stop depending on commit timestamps
test-lib: set deterministic default author/committer date
t9100: explicitly unset GIT_COMMITTER_DATE
t5539: make timestamp requirements more explicit
t9700: loosen ident timezone regex
t6000: use test_tick consistently
|
|
Updates to the changed-paths bloom filter.
* ds/commit-graph-bloom-updates:
commit-graph: check all leading directories in changed path Bloom filters
revision: empty pathspecs should not use Bloom filters
revision.c: fix whitespace
commit-graph: check chunk sizes after writing
commit-graph: simplify chunk writes into loop
commit-graph: unify the signatures of all write_graph_chunk_*() functions
commit-graph: persist existence of changed-paths
bloom: fix logic in get_bloom_filter()
commit-graph: change test to die on parse, not load
commit-graph: place bloom_settings in context
|
