| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The testcase only required that the merge complete without conflict,
without specifying what the correct resolution was. Since normalization
changed this from a modify/delete to a not-modified/delete, the correct
resolution is to have the file be removed at the end. Add a check for
this resolution.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests for the merge machinery are spread over several places.
Collect them into t64xx for simplicity. Some notes:
t60[234]*.sh:
Merge tests started in t602*, overgrew bisect and remote tracking
tests in t6030, t6040, and t6041, and nearly overtook replace tests
in t6050. This made picking out relevant tests that I wanted to run
in a tighter loop slightly more annoying for years.
t303*.sh:
These started out as tests for the 'merge-recursive' toplevel command,
but did not restrict to that and had lots of overlap with the
underlying merge machinery.
t7405, t7613:
submodule-specific merge logic started out in submodule.c but was
moved to merge-recursive.c in commit 18cfc08866 ("submodule.c: move
submodule merging to merge-recursive.c", 2018-05-15). Since these
tests are about the logic found in the merge machinery, moving these
tests to be with the merge tests makes sense.
t7607, t7609:
Having tests spread all over the place makes it more likely that
additional tests related to a certain piece of logic grow in all those
other places. Much like t303*.sh, these two tests were about the
underlying merge machinery rather than outer levels.
Tests that were NOT moved:
t76[01]*.sh:
Other than the four tests mentioned above, the remaining tests in
t76[01]*.sh are related to non-recursive merge strategies, parameter
parsing, and other stuff associated with the highlevel builtin/merge.c
rather than the recursive merge machinery.
t3[45]*.sh:
The rebase testcases in t34*.sh also test the merge logic pretty
heavily; sometimes changes I make only trigger failures in the rebase
tests. The rebase tests are already nicely coupled together, though,
and I didn't want to mess that up. Similar comments apply for the
cherry-pick tests in t35*.sh.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `stop_progress()`, we're careful to check that `p_progress` is
non-NULL before we dereference it, but by then we have already
dereferenced it when calling `finish_if_sparse(*p_progress)`. And, for
what it's worth, we'll go on to blindly dereference it again inside
`stop_progress_msg()`.
We could return early if we get a NULL-pointer, but let's go one step
further and BUG instead. The progress API handles NULL just fine, but
that's the NULL-ness of `*p_progress`, e.g., when running with
`--no-progress`. If `p_progress` is NULL, chances are that's a mistake.
For symmetry, let's do the same check in `stop_progress_msg()`, too.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update "git help guides" documentation organization.
* pb/guide-docs:
git.txt: add list of guides
Documentation: don't hardcode command categories twice
help: drop usage of 'common' and 'useful' for guides
command-list.txt: add missing 'gitcredentials' and 'gitremote-helpers'
|
|
Error message fix.
* so/rev-parser-errormessage-fix:
revision: fix die() message for "--unpacked="
|
|
All "mergy" operations that internally use the merge-recursive
machinery should honor the merge.renormalize configuration, but
many of them didn't.
* en/eol-attrs-gotchas:
checkout: support renormalization with checkout -m <paths>
merge: make merge.renormalize work for all uses of merge machinery
t6038: remove problematic test
t6038: make tests fail for the right reason
|
|
Small fixes and workarounds.
* jk/compiler-fixes-and-workarounds:
revision: avoid leak when preparing bloom filter for "/"
revision: avoid out-of-bounds read/write on empty pathspec
config: work around gcc-10 -Wstringop-overflow warning
|
|
Doc updates.
* ny/notes-doc-sample-update:
docs: improve the example that illustrates git-notes path names
|
|
Adjust tests in contrib/ to the recent change to fmt-merge-msg.
* es/adjust-subtree-test-for-merge-msg-update:
Revert "contrib: subtree: adjust test to change in fmt-merge-msg"
|
|
Code cleanup.
* rs/bisect-oid-to-hex-fix:
bisect: use oid_to_hex_r() instead of memcpy()+oid_to_hex()
|
|
Comment fix.
* en/merge-recursive-comment-fixes:
merge-recursive: fix unclear and outright wrong comments
|
|
Test fix.
* ma/t1450-quotefix:
t1450: fix quoting of NUL byte when corrupting pack
|
|
Code cleanup around "worktree" API implementation.
* es/worktree-cleanup:
worktree: retire special-case normalization of main worktree path
worktree: drop bogus and unnecessary path munging
worktree: drop unused code from get_linked_worktree()
worktree: drop pointless strbuf_release()
|
|
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
|
|
The purpose of "git init --separate-git-dir" is to separate the
repository from the worktree. This is true even when --separate-git-dir
is used on an existing worktree, in which case, it moves the .git/
subdirectory to a new location outside the worktree.
However, an outright bare repository (such as one created by "git init
--bare"), has no worktree, so using --separate-git-dir to separate it
from its non-existent worktree is nonsensical. Therefore, make it an
error to use --separate-git-dir on a bare repository.
Implementation note: "git init" considers a repository bare if told so
explicitly via --bare or if it guesses it to be so based upon
heuristics. In the explicit --bare case, a conflict with
--separate-git-dir is easy to detect early. In the guessed case,
however, the conflict can only be detected once "bareness" is guessed,
which happens after "git init" has begun creating the repository.
Technically, we can get by with a single late check which would cover
both cases, however, erroring out early, when possible, without leaving
detritus provides a better user experience.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Under normal circumstances, if a test author misspells a filename passed
to test_cmp(), the error is quickly discovered when the test fails
unexpectedly due to test_cmp() being unable to find the file. However,
if the test is expected to fail, as with test_expect_failure(), a
misspelled filename as argument to test_cmp() will go unnoticed since
the test will indeed fail, but for the wrong reason. Make it easier for
test authors to discover such problems early by sanity-checking the
arguments to test_cmp(). To avoid penalizing all clients of test_cmp()
in the general case, only check for missing files if the comparison
fails.
While at it, make test_cmp_bin() sanity-check its arguments, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating "new file" diffs against i-t-a index entries, diff-lib
erroneously used the mode of the cache entry rather than the mode of the
file in the worktree. This changes run_diff_files() to correctly use the
mode of the worktree file in this case.
Signed-off-by: Raymond E. Pasco <ray@ameretat.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
apply --cached (as used by add -p) should accept creation and deletion
patches to intent-to-add paths in the index. apply --index, however,
should always fail because an intent-to-add path never matches the
worktree (by definition).
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Raymond E. Pasco <ray@ameretat.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By definition, an intent-to-add index entry can never match the
worktree, because worktrees have no concept of intent-to-add entries.
Therefore, "apply --index" should always fail on intent-to-add paths.
Because check_preimage() calls verify_index_match(), it already fails
for patches other than creation patches, which check_preimage() ignores.
This patch adds a check to check_preimage()'s rough equivalent for
creation patches, check_to_create().
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Raymond E. Pasco <ray@ameretat.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that find_bisection() accepts multiple boolean arguments, these may
be combined into a single unsigned integer in order to declutter some of
the code in bisect.c
Also, rename the existing "flags" bitfield to "commit_flags", to
explicitly differentiate it from the new "bisect_flags" bitfield.
Based-on-patch-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Upon seeing a merge commit when bisecting, this option may be used to
follow only the first parent.
In detecting regressions introduced through the merging of a branch, the
merge commit will be identified as introduction of the bug and its
ancestors will be ignored.
This option is particularly useful in avoiding false positives when a
merged branch contained broken or non-buildable commits, but the merge
itself was OK.
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cmd_bisect__helper() is intended as a temporary shim layer serving as an
interface for git-bisect.sh. This function and git-bisect.sh should
eventually be replaced by a C implementation, cmd_bisect(), serving as
an entrypoint for all "git bisect ..." shell commands: cmd_bisect() will
only parse the first token following "git bisect", and dispatch the
remaining args to the appropriate function ["bisect_start()",
"bisect_next()", etc.].
Thus, cmd_bisect__helper() should not be responsible for parsing flags
like --no-checkout. Instead, let the --no-checkout flag remain in the
argv array, so it may be evaluated alongside the other options already
parsed by bisect_start().
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add first_parent_only parameter to find_bisection(), removing the
barrier that prevented combining the --bisect and --first-parent flags
when using git rev-list
Based-on-patch-by: Tiago Botelho <tiagonbotelho@hotmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enforce consistent styling for tests on "git bisect run":
- Use "write_script" to abstract away platform-specific details.
- Favor current whitespace conventions.
- While at it, change "introduced" to "added" in the comments to make
them read better.
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Aaron Lipman <alipman88@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to not repeatedly search for the reference-transaction hook in
case it's getting called multiple times, we use a caching mechanism to
only call `find_hook()` once. What was missed though is that the return
value of `find_hook()` actually comes from a static strbuf, which means
it will get overwritten when calling `find_hook()` again. As a result,
we may call the wrong hook with parameters of the reference-transaction
hook.
This scenario was spotted in the wild when executing a git-push(1) with
multiple references, where there are interleaving calls to both the
update and the reference-transaction hook. While initial calls to the
reference-transaction hook work as expected, it will stop working after
the next invocation of the update hook. The result is that we now start
calling the update hook with parameters and stdin of the
reference-transaction hook.
This commit fixes the issue by storing a copy of `find_hook()`'s return
value in the cache.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A Git client may produce a "remote error:" message (along with whatever
error the other side sent us) in two places:
- when we see an ERR packet
- when we're using a sideband and see sideband 3
We can't reliably translate the message the other side sent us, but we
can do so for our own prefix. However, we translate only the ERR-packet
case but not the sideband-3 case. Let's make them consistent (by marking
both for translation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there is no need to run a specific function on certain platforms,
we often #define an empty function to swallow its parameters and
make it into a no-op, e.g.
#define precompose_argv(c,v) /* no-op */
While this guarantees that no unneeded code is generated, it also
discards type and other checks on these parameters, e.g. a new code
written with the argv-array API (diff_args is of type "struct
argv_array" that has .argc and .argv members):
precompose_argv(diff_args.argc, diff_args.argv);
must be updated to use "struct strvec diff_args" with .nr and .v
members, like so:
precompose_argv(diff_args.nr, diff_args.v);
after the argv-array API has been updated to the strvec API.
However, the "no oop" C preprocessor macro is too aggressive to
discard what is unused, and did not catch such a call that was left
unconverted.
Using a "static inline" function whose body is a no-op should still
result in the same binary with decent compilers yet catch such a
reference to a missing field or passing a value of a wrong type.
While at it, I notice that precompute_str() has never been used
anywhere in the code, since it was introduced at 76759c7d (git on
Mac OS and precomposed unicode, 2012-07-08). Instead of turning it
into a static inline, just remove it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Drop whitespace in the value of `$test_description` and in a test body
and use `test_write_lines`.
Stop defining `$u` with a trailing space just so that we can tuck it in
like `git foo $u$more...` and get minimal whitespace in the command:
`git foo $u $more...` is more readable at the "cost" of an empty `$u`
yielding `git foo something...`.
Finally, avoid using single quotes within the test scripts to repeatedly
close and reopen the quotes that wrap the test scripts (see the previous
commit). This "unnecessary" quoting does mean that the verbose test
output shows the interpolated values, i.e., the shell code we're
running. But the downside is that the source of the script does *not*
show the shell code we're eventually executing, leaving the reader to
reason about what we really do and whether there are any quoting issues.
(There aren't.)
Where we run through loops to generate several "identical but different"
tests, the test message contains the interpolated variables we're
looping on, meaning one can always identify exactly which instance has
failed, even if the verbose test output shows the exact same test body
several times.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the test scripts, the recommended style is, e.g.:
test_expect_success 'name' '
do-something somehow &&
do-some-more testing
'
When using this style, any single quote in the multi-line test section
is actually closing the lone single quotes that surround it.
It can be a non-issue in practice:
test_expect_success 'sed a little' '
sed -e 's/hi/lo/' in >out # "ok": no whitespace in s/hi/lo/
'
Or it can be a bug in the test, e.g., because variable interpolation
happens before the test even begins executing:
v=abc
test_expect_success 'variable interpolation' '
v=def &&
echo '"$v"' # abc
'
Change several such in-test single quotes to use double quotes instead
or, in a few cases, drop them altogether. These were identified using
some crude grepping. We're not fixing any test bugs here, but we're
hopefully making these tests slightly easier to grok and to maintain.
There are legitimate use cases for closing a quote and opening a new
one, e.g., both '\'' and '"'"' can be used to produce a literal single
quote. I'm not touching any of those here.
In t9401, tuck the redirecting ">" to the filename while we're touching
those lines.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
blame/annotate have supported --first-parent since commit 95a4fb0eac
("blame: handle --first-parent"). This adds a blurb on that option to
the documentation.
Signed-off-by: Raymond E. Pasco <ray@ameretat.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diff-files recently changed to treat changes to paths marked "intent to
add" in the index as new file diffs rather than diffs from the empty
blob. However, apply refuses to apply new file diffs on top of existing
index entries, except in the case of renames. This causes "git add -p",
which uses apply, to fail when attempting to stage hunks from a file
when intent to add has been recorded.
This changes the logic in check_to_create() which checks if an entry
already exists in an index in two ways: first, we only search for an
index entry at all if ok_if_exists is false; second, we check for the
CE_INTENT_TO_ADD flag on any index entries we find and allow the apply
to proceed if it is set.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Raymond E. Pasco <ray@ameretat.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is a call to has_object_file(), which lazily fetches missing
objects in a partial clone, when the object is known to not be
a promisor object. Change that call to has_object(), which does not do
any lazy fetching.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The options --missing=allow-{any,promisor} were introduced in caf3827e2f
("rev-list: add list-objects filtering support", 2017-11-22) with the
following note in the commit message:
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
The idea that these options are missing-object aware (and thus do not
need to lazily fetch objects, unlike unaware commands that assume that
all objects are present) are assumed in later commits such as 07ef3c6604
("fetch test: use more robust test for filtered objects", 2020-01-15).
However, the current implementations of these options use
has_object_file(), which indeed lazily fetches missing objects. Teach
these implementations not to do so. Also, update the documentation of
these options to be clearer.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When applying a binary patch, as an optimization, "apply" checks if the
postimage is already present. During this fetch, it is perfectly
expected for the postimage not to be present, so there is no need to
lazy-fetch missing objects. Teach "apply" not to lazy-fetch in this
case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There have been a few bugs wherein Git fetches missing objects whenever
the existence of an object is checked, even though it does not need to
perform such a fetch. To resolve these bugs, we could look at all the
places that has_object_file() (or a similar function) is used. As a
first step, introduce a new function has_object() that checks for the
existence of an object, with a default behavior of not fetching if the
object is missing and the repository is a partial clone. As we verify
each has_object_file() (or similar) usage, we can replace it with
has_object(), and we will know that we are done when we can delete
has_object_file() (and the other similar functions).
Also, the new function has_object() has more appropriate defaults:
besides not fetching, it also does not recheck packed storage.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The change in 6e9c4d408d ("git-cvsexportcommit: port to SHA-256",
2020-06-22) added the use of a temporary directory for the index.
However, the form we used doesn't work in versions of Perl before
5.10.1. For example, version 5.10.0 contains a version of File::Temp
from 2007 that doesn't contain "newdir".
In order to make the code work with 5.8.8, which we support, let's
change to use the static method "tempdir" with the argument "CLEANUP",
which provides the same behavior.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests added to t5616 in 6dd3456a8c (upload-pack.c: allow banning
certain object filter(s), 2020-08-03) can fail racily, but only with
GETTEXT_POISON enabled.
The tests in question look something like this:
test_must_fail ok=sigpipe git clone --filter=blob:none ... 2>err &&
grep "filter blob:none not supported' err
The remote upload-pack process writes that error message both as an ERR
packet, but also via a die() message. In theory we should see the
message twice in the "err" file. The client relays the message from the
packet to its stderr (with a "remote error:" prefix), and because this
is a local-system clone, upload-pack's stderr goes to the same place.
But because clone may be writing to the pipe when upload-pack calls
die(), it may get SIGPIPE and fail to relay the message. That's why we
need our "ok=sigpipe" trick. But our grep should still work reliably in
that case. Either:
- we got SIGPIPE on the client, which means upload-pack completed its
die(), and we'll see that version of the message.
- the client didn't get SIGPIPE, and so it successfully relays the
message.
In theory we'd see both copies of the message in the second case. But
now always! As soon as the client sees ERR, it exits and we run grep.
But we have no guarantee that the upload-pack process has exited at this
point, or even written its die() message. We might only see the client
version of the message.
Normally that's OK. We only need to see one or the other to pass the
test. But now consider GETTEXT_POISON. upload-pack doesn't translate the
die() message nor the ERR packet. But once the client receives it, it
calls:
die(_("remote error: %s"), buffer + 4);
That message _is_ marked for translation. Normally we'd just replace the
"remote error:" portion of it, but in GETTEXT_POISON mode, we replace
the whole thing with "# GETTEXT POISON #" and don't include the "%s"
part at all. So the whole text from the ERR packet is dropped, and so we
may racily see a test failure if upload-pack's die() call wasn't yet
written.
We can fix it by using test_i18ngrep, which just makes this grep a noop
in the poison mode.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Not all man5/man7 guides are mentioned in the 'git(1)' documentation,
which makes the missing ones somewhat hard to find.
Add a list of the guides to git(1) by leveraging the existing
`Documentation/cmd-list.perl` script to generate a file `cmds-guide.txt`
which gets included in git.txt.
Also, do not hard-code the manual section '1'. Instead, use a regex so
that the manual section is discovered from the first line of each
`git*.txt` file.
This addition was hinted at in 1b81d8cb19 (help: use command-list.txt
for the source of guides, 2018-05-20).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of hard-coding the list of command categories in both
`Documentation/Makefile` and `Documentation/cmd-list.perl`, make the
Makefile the authoritative source and tweak `cmd-list.perl` so that it
receives the list of command categories as argument.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 1b81d8cb19 (help: use command-list.txt for the source of guides,
2018-05-20), all man5/man7 guides listed in command-list.txt appear in
the output of 'git help -g'.
However, 'git help -g' still prefixes this list with "The common Git
guides are:", which makes one wonder if there are others!
In the same spirit, the man page for 'git help' describes the '--guides'
option as listing 'useful' guides, which is not false per se but can
also be taken to mean that there are other guides that exist but are not
useful.
Instead of 'common' and 'useful', use 'Git concept guides' in both
places. To keep the code in line with this change, rename
help.c::list_common_guides_help to list_guides_help.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The guides 'gitcredentials' and 'gitremote-helpers' do not currently
appear in command-list.txt.
'gitcredentials' was forgotten back when guides were added to
command-list.txt in 1b81d8cb19 (help: use command-list.txt for the
source of guides, 2018-05-20).
'gitremote-helpers' was moved to section 7 in 439cc74632 (docs: move
gitremote-helpers into section 7, 2019-03-25), but command-list.txt was
not updated at the time.
Add these two guides to the list of guides in 'command-list.txt', so
that they appear in the output of 'git help --guides', and capitalize
the first word of the description of 'gitcredentials', as was done in
1b81d8c (help: use command-list.txt for the source of guides,
2018-05-20) for the other guides.
While at it, add a comment in Documentation/Makefile to remind developers
to update command-list.txt if they add a new guide.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Get rid of the trailing dot and mark for translation.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pretend-object mechanism checks if the given object already
exists in the object store before deciding to keep the data
in-core, but the check would have triggered lazy fetching of such
an object from a promissor remote.
* jt/pretend-object-never-come-from-elsewhere:
sha1-file: make pretend_object_file() not prefetch
|
|
While packing many objects in a repository with a promissor remote,
lazily fetching missing objects from the promissor remote one by
one may be inefficient---the code now attempts to fetch all the
missing objects in batch (obviously this won't work for a lazy
clone that lazily fetches tree objects as you cannot even enumerate
what blobs are missing until you learn which trees are missing).
* jt/pack-objects-prefetch-in-batch:
pack-objects: prefetch objects to be packed
pack-objects: refactor to oid_object_info_extended
|
|
Command line completion (in contrib/) update.
* mp/complete-show-color-moved:
completion: add show --color-moved[-ws]
|
|
If we're given an empty pathspec, we refuse to set up bloom filters, as
described in f3c2a36810 (revision: empty pathspecs should not use Bloom
filters, 2020-07-01).
But before the empty string check, we drop any trailing slash by
allocating a new string without it. So a pathspec consisting only of "/"
will allocate that string, but then still cause us to bail, leaking the
new string. Let's make sure to free it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running t4216 with ASan results in it complaining of an out-of-bounds
read in prepare_to_use_bloom_filter(). The issue is this code to strip a
trailing slash:
last_index = pi->len - 1;
if (pi->match[last_index] == '/') {
because we have no guarantee that pi->len isn't zero. This can happen if
the pathspec is ".", as we translate that to an empty string. And if
that read of random memory does trigger the conditional, we'd then do an
out-of-bounds write:
path_alloc = xstrdup(pi->match);
path_alloc[last_index] = '\0';
Let's make sure to check the length before subtracting. Note that for an
empty pathspec, we'd end up bailing from the function a few lines later,
which makes it tempting to just:
if (!pi->len)
return;
early here. But our code here is stripping a trailing slash, and we need
to check for emptiness after stripping that slash, too. So we'd have two
blocks, which would require repeating some cleanup code.
Instead, just skip the trailing-slash for an empty string. Setting
last_index at all in the case is awkward since it will have a nonsense
value (and it uses an "int", which is a too-small type for a string
anyway). So while we're here, let's:
- drop last_index entirely; it's only used in two spots right next to
each other and writing out "pi->len - 1" in both is actually easier
to follow
- use xmemdupz() to duplicate the string. This is slightly more
efficient, but more importantly makes the intent more clear by
allocating the correct-sized substring in the first place. It also
eliminates any question of whether path_alloc is as long as
pi->match (which it would not be if pi->match has any embedded NULs,
though in practice this is probably impossible).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
