| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Without additional modifiers, 'git config <key> <value>' attempts
to set a single value in the .git/config file. When the
value-pattern parameter is supplied, this command behaves in a
non-trivial manner.
Consider 'git config <key> <value> <value-pattern>'. The expected
behavior is as follows:
1. If there are multiple existing values that match 'value-pattern',
then the command fails. Users should use --replace-all instead.
2. If there is no existing values match 'value-pattern', then the
'key=value' pair is appended, making this 'key' a multi-valued
config setting.
3. If there is one existing value that matches 'value-pattern', then
the new config has one entry where 'key=value'.
Add a test that demonstrates these options. Break from the existing
pattern in t1300-config.sh to use 'git config --file=<file>' instead of
modifying .git/config directly to prevent possibly incompatible repo
states. Also use 'git config --file=<file> --list' for config state
comparison instead of the config file format. This makes the tests
more readable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'value_regex' argument in the 'git config' builtin is poorly named,
especially related to an upcoming change that allows exact string
matches instead of ERE pattern matches.
Perform a mostly mechanical change of every instance of 'value_regex' to
'value_pattern' in the codebase. This is only critical for documentation
and error messages, but it is best to be consistent inside the codebase,
too.
For documentation, use 'value-pattern' which is better punctuation. This
affects Documentation/git-config.txt and the usage in builtin/config.c,
which was already mixed between 'value_regex' and 'value-regex'.
I gave some thought to leaving the value_regex variables inside config.c
that are regex_t pointers. However, it is probably best to keep the name
consistent with the rest of the variables.
This does not update the translations inside the po/ directory, as that
creates conflicts with ongoing work. The input strings should
automatically update through automation, and a few of the output strings
currently use "[value_regex]" directly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We will extend the flexibility of the config API. Before doing so, let's
take an existing 'int multi_replace' parameter and replace it with a new
'unsigned flags' parameter that can take multiple options as a bit field.
Update all callers that specified multi_replace to now specify the
CONFIG_FLAGS_MULTI_REPLACE flag. To add more clarity, extend the
documentation of git_config_set_multivar_in_file() including a clear
labeling of its arguments. Other config API methods in config.h require
only a change of the final parameter from 'int' to 'unsigned'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a packed object is stored in a multi-pack index, but that pack has
racily gone away, the MIDX code simply calls die(), when it could be
returning an error to the caller, which would in turn lead to
re-scanning the pack directory.
A pack can racily disappear, for example, due to a simultaneous 'git
repack -ad',
You can also reproduce this with two terminals, where one is running:
git init
while true; do
git commit -q --allow-empty -m foo
git repack -ad
git multi-pack-index write
done
(in effect, constantly writing new MIDXs), and the other is running:
obj=$(git rev-parse HEAD)
while true; do
echo $obj | git cat-file --batch-check='%(objectsize:disk)' || break
done
That will sometimes hit the error preparing packfile from
multi-pack-index message, which this patch fixes.
Right now, that path to discovering a missing pack looks something like
'find_pack_entry()' calling 'fill_midx_entry()' and eventually making
its way to call 'nth_midxed_pack_entry()'.
'nth_midxed_pack_entry()' already checks 'is_pack_valid()' and
propagates an error if the pack is invalid. So, this works if the pack
has gone away between calling 'prepare_midx_pack()' and before calling
'is_pack_valid()', but not if it disappears before then.
Catch the case where the pack has already disappeared before
'prepare_midx_pack()' by returning an error in that case, too.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 17c35c8969 (packfile: skip loading index if in multi-pack-index,
2018-07-12) we stopped loading the .idx file for packs that are
contained within a multi-pack index.
This saves us the effort of loading an .idx and doing some lightweight
validity checks by way of 'packfile.c:load_idx()', but introduces a race
between processes that need to load the index (e.g., to generate a
reverse index) and processes that can delete the index.
For example, running the following in your shell:
$ git init repo && cd repo
$ git commit --allow-empty -m 'base'
$ git repack -ad && git multi-pack-index write
followed by:
$ rm -f .git/objects/pack/pack-*.idx
$ git rev-parse HEAD | git cat-file --batch-check='%(objectsize:disk)'
will result in a segfault prior to this patch. What's happening here is
that we notice that the pack is in the multi-pack index, and so don't
check that it still has a .idx. When we then try and load that index to
generate a reverse index, we don't have it, so the call to
'find_pack_revindex()' in 'packfile.c:packed_object_info()' returns
NULL, and then dereferencing it causes a segfault.
Of course, we don't ever expect someone to remove the index file by
hand, or to be in a state where we never wrote it to begin with (yet
find that pack in the multi-pack-index). But, this can happen in a
timing race with 'git repack -ad', which removes all existing packs
after writing a new pack containing all of their objects.
Avoid this by reverting the hunk of 17c35c8969 which stops loading the
index when the pack is contained in a MIDX. This makes the latter half
of 17c35c8969 useless, since we'll always have a non-NULL
'p->index_data', in which case that if statement isn't guarding
anything.
These two together effectively revert 17c35c8969, and avoid the race
explained above.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While help.autocorrect can be set to 0 to decline auto-execution of
possibly mistyped commands, it still spends cycles to compute the
suggestions, and it wastes screen real estate.
Update help.autocorrect to accept the string "never" to just exit
with error upon mistyped commands to help users who prefer to never
see suggested corrections at all.
While at it, introduce "immediate" as a more readable way to
immediately execute the auto-corrected command, which can be done
with negative value.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When holding the lock for rewriting the credential file, use a timeout
to avoid race conditions when the credentials file needs to be updated
in parallel.
An example would be doing `fetch --all` on a repository with several
remotes that need credentials, using parallel fetching.
The timeout can be configured using "credentialStore.lockTimeoutMS",
defaulting to 1 second.
Signed-off-by: Simão Afonso <simao.afonso@powertools-tech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sleep function is defined in wrapper.c, so it makes more sense to be a in
system compatibility header.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Emit a trace2 error event whenever warning() is called, just like when
die(), error(), or usage() is called.
This helps debugging issues that would trigger warnings but not errors.
In particular, this might have helped debugging an issue I encountered
with commit graphs at $DAYJOB [1].
There is a tradeoff between including potentially relevant messages and
cluttering up the trace output produced. I think that warning() messages
should be included in traces, because by its nature, Git is used over
multiple invocations of the Git tool, and a failure (currently traced)
in a Git invocation might be caused by an unexpected interaction in a
previous Git invocation that only has a warning (currently untraced) as
a symptom - as is the case in [1].
[1] https://lore.kernel.org/git/20200629220744.1054093-1-jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A review exchange may begin with a reviewer asking "what did you
mean by this phrase in your log message (or here in the doc)?", the
author answering what was meant, and then the reviewer saying "ah,
that is what you meant---then the flow of the logic makes sense".
But that is not the happy end of the story. New contributors often
forget that the material that has been reviewed in the above exchange
is still unclear in the same way to the next person who reads it,
until it gets updated.
While we are in the vicinity, rephrase the verb "request" used to
refer to comments by reviewers to "suggest"---this matches the
contrast between "original" and "suggested" that appears later in
the same paragraph, and more importantly makes it clearer that it is
not like authors are to please reviewers' wishes but rather
reviewers are merely helping authors to polish their commits.
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we can override the default branch name in the tests via
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME`, we should avoid expecting a
particular hard-coded name.
So let's rename the initial branch immediately to `primary` and work
with that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 1c1518071c (submodule: use "fetch" logic instead of custom remote
discovery, 2020-11-14) rewrote the logic in fetch_in_submodule to do:
elif test "$2" -ne ""
But this is nonsense in shell: -ne is for numeric comparisons. This
should be "=" or more idiomatically:
elif test -n "$2"
But once we fix that, many tests start failing. Because that commit
introduced another problem. The caller that passes 3 arguments looks
like this:
fetch_in_submodule "$sm_path" $depth "$sha1"
Note the unquoted $depth parameter. When it isn't set, the function will
see only 2 arguments, and the function has no idea if what it sees in $2
is an option to go on the command line, or a refspec to pass on stdin.
In the old code before that commit:
fetch_in_submodule () (
sanitize_submodule_env &&
cd "$1" &&
- case "$2" in
- '')
- git fetch ;;
- *)
- shift
- git fetch $(get_default_remote) "$@" ;;
- esac
we treated those the same, so it didn't matter. But in the new logic
(with my fix above):
+ if test $# -eq 3
+ then
+ echo "$3" | git fetch --stdin "$2"
+ elif test -n "$n"
+ then
+ git fetch "$2"
+ else
+ git fetch
+ fi
we use the number of parameters to distinguish the two. Let's insist
that the caller pass an empty string for positional parameter two if
they want to have a third parameter after it.
But that still leaves one problem. In the --stdin block, we
unconditionally pass "$2" to git-fetch, even if it's the empty string.
Rather than add another conditional, we can use :+ parameter expansion
to include it only if it's non-empty. In fact, we can do the same for
the elif, too, simplifying it further. Technically this is overkill,
since we know the --depth parameter will not have whitespace (and
indeed, most callers do not bother quoting it), but it doesn't hurt for
the function to be careful.
It's somewhat amazing that no tests were failing. I think what happened
is that:
- the 3-arg form rarely triggered; any call with a non-empty $depth
and a $sha1 would work, but one with an empty $depth would only have
2 arguments
- because of the wrong arguments to "test", the shell would complain
and exit non-zero. So we never ran the middle conditional at all
- that left every call running "git fetch" with no arguments. A
well-written test could have detected the distinction here, but in
practice omitting --depth just means fetching more commits, and
fetching everything (rather than a single sha1) works as long as the
commit in question is reachable
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Advanced and expert users may want to know how 'git maintenance start'
schedules background maintenance in order to customize their own
schedules beyond what the maintenance.* config values allow. Start a new
set of sections in git-maintenance.txt that describe how 'cron' is used
to run these tasks.
This is particularly valuable for users who want to inspect what Git is
doing or for users who want to customize the schedule further. Having a
baseline can provide a way forward for users who have never worked with
cron schedules.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing schedule mechanism using 'cron' is supported by POSIX
platforms, but not Windows. It also works slightly differently on
macOS to significant detriment of the user experience. To allow for
new implementations on these platforms, extract a method that
performs the platform-specific scheduling mechanism. This will be
swapped at compile time with new implementations on specialized
platforms.
As we add this generality, rename GIT_TEST_CRONTAB to
GIT_TEST_MAINT_SCHEDULER. Further, this variable is now parsed as
"<scheduler>:<command>" so we can test platform-specific scheduling
logic even when not on the correct platform. By specifying the
<scheduler> in this string, we will be able to test all three sets of
Git logic from a Linux machine.
Co-authored-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Restore a space that was lost in 8a0fc8d19d (stash: convert apply to
builtin, 2019-02-25).
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nate Avers <nate@roosteregg.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If notes.displayRef is configured with no value[1], control should be
returned to the caller when notes.c:notes_display_config() checks if 'v'
is NULL. Otherwise, both git log --notes and git diff-tree --notes will
subsequently segfault when refs.h:has_glob_specials() calls strpbrk()
with a NULL first argument.
[1] Examples:
.git/config:
[notes]
displayRef
$ git -c notes.displayRef [...]
Signed-off-by: Nate Avers <nate@roosteregg.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix regression introduced when nvimdiff support in mergetool was added.
* pd/mergetool-nvimdiff:
mergetool: avoid letting `list_tool_variants` break user-defined setups
mergetools/bc: add `bc4` to the alias list for Beyond Compare
|
|
Build configuration cleanup.
* ab/config-mak-uname-simplify:
config.mak.uname: remove unused NEEDS_SSL_WITH_CURL flag
config.mak.uname: remove unused the NO_R_TO_GCC_LINKER flag
|
|
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
|
|
Running "git diff" while allowing external diff in a state with
unmerged paths used to segfault, which has been corrected.
* jk/diff-release-filespec-fix:
t7800: simplify difftool test
diff: allow passing NULL to diff_free_filespec_data()
|
|
"git rev-parse" learned the "--end-of-options" to help scripts to
safely take a parameter that is supposed to be a revision, e.g.
"git rev-parse --verify -q --end-of-options $rev".
* jk/rev-parse-end-of-options:
rev-parse: handle --end-of-options
rev-parse: put all options under the "-" check
rev-parse: don't accept options after dashdash
|
|
The maximum length of output filenames "git format-patch" creates
has become configurable (used to be capped at 64).
* jc/format-patch-name-max:
format-patch: make output filename configurable
|
|
In 15fabd1bbd ("builtin/grep.c: make configuration callback more
reusable", 2012-10-09), we learned to fill a `static struct grep_opt
grep_defaults` which we can use as a blueprint for other such structs.
At the time, we didn't consider designated initializers to be widely
useable, but these days, we do. (See, e.g., cbc0f81d96 ("strbuf: use
designated initializers in STRBUF_INIT", 2017-07-10).)
Use designated initializers to let the compiler set up the struct and so
that we don't need to remember to call `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`init_grep_defaults()` fills a `static struct grep_opt grep_defaults`.
This struct is then used by `grep_init()` as a blueprint for other such
structs. Notably, `grep_init()` takes a `struct repo *` and assigns it
into the target struct.
As a result, it is unnecessary for us to take a `struct repo *` in
`init_grep_defaults()` as well. We assign it into the default struct and
never look at it again. And in light of how we return early if we have
already set up the default struct, it's not just unnecessary, but is
also a bit confusing: If we are called twice and with different repos,
is it a bug or a feature that we ignore the second repo?
Drop the repo parameter for `init_grep_defaults()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We spawn an external pack-objects process to actually send
objects to the remote side. If we are killed by a signal
during this process, the pack-objects will keep running and
complete the push, which may surprise the user. We should
take it down when we go down.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git worktree add` (without --force) errors out when given a path
that is already registered as a worktree and the path is missing on
disk. But the `cmd` and `path` strings are switched on the error
message. Let's fix that.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As noted in an earlier change the keep_base_pack variable name is a
relic from an earlier on-list version of ae4e89e549 ("gc: add
--keep-largest-pack option", 2018-04-15) before it was renamed to
--keep-largest-pack.
Let's change the variable name to avoid that confusion, it's easier to
read the code if there's a 1=1 mapping between the variable name and
option name.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --keep-base-pack option never existed in git.git. It was the name
for the --keep-largest-pack option in earlier revisions of that series
before it landed as ae4e89e549 ("gc: add --keep-largest-pack option",
2018-04-15).
The later patches in that series[1][2] weren't changed to also refer
to --keep-largest-pack, so we've had this reference to a nonexisting
option ever since the feature initially landed.
1. 55dfe13df9 ("gc: add gc.bigPackThreshold config", 2018-04-15)
2. 9806f5a7bf ("gc --auto: exclude base pack if not enough mem to
"repack -ad"", 2018-04-15)
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We introduced the `PREPARE_FOR_MAIN_BRANCH` prereq for the sole purpose
of allowing us to perform the non-trivial adjustments regarding the
`master` -> `main` rename before the automatable ones.
Now that the transition is almost complete, we can stop using it in most
instances. The only two exceptions are t5526 and t9902: at the time of
writing, there are other patches in flight that touch these test
scripts, therefore their transition to `main` is postponed to a later
date.
This patch is the result of this command:
sed -i 's/PREPARE_FOR_MAIN_BRANCH[ ,]//' t/t[0-9]*.sh &&
git checkout HEAD -- t/t5526\* t/t9902\*
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t9902, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t9903. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t99*.sh lib-cvs.sh &&
git checkout HEAD -- t9902\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for all tests (except the ones we specifically excluded for now).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous commits, we adjusted the test suite to use the branch
name `main` for initial branches.
The `git p4`-related tests are a bit harder to adjust because `git p4`
uses the ref `refs/heads/p4/master` to track the remote branches, and
for now, we do not want to change that (this might be the subject of a
future patch series). We only need to adjust for the actual initial
branch name to be changed to `main`.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t9[5-7]*.sh lib-cvs.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t9[0-4]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t8*.sh annotate*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Excluding t7817, which is added in an unrelated patch series at the time
of writing, this adjusts t7[5-9]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[5-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t7064, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t7[0-4]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t7[0-4]*.sh &&
git checkout HEAD -- t7064\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t6[4-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are in the process of renaming the default branch name to `main`,
which is two characters shorter than `master`. Therefore, some lines
need to be adjusted in t6416, t6422 and t6427 that want to align text
involving the default branch name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t6300, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t6[0-3]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t6[0-3]*.sh &&
git checkout HEAD -- t6300\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t5[6-9]*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/retsam/niam/g' \
-- t55[4-9]*.sh t556x*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Note that t5541 uses the reversed `master` name: `retsam`. We replace it
by the equivalent for `main`: `niam`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t5526, which sees independent development elsewhere
at the time of writing, we use `main` as the default branch name in
t55[23]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- \
t55[23]*.sh &&
git checkout HEAD -- t5526\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This commit allows us to define
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for that range of tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t551*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t550*.sh)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an upcoming commit, we will use `main` as the default branch name in
t5503 instead of `master`. This will require extra padding in ASCII-art
commit graphs, which we hereby add preemptively.
By doing this preemptively rather than after the commit applying the
search-and-replace, it is more obvious that we caught all aligned
comments that are affected by the latter commit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t5310, which is developed independently of the
current patch series at the time of writing, we now use `main` as
default branch in t5[0-4]*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t5[0-4]*.sh &&
git checkout HEAD -- t5310\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are about to search-and-replace all mentions of `master` in t5323 by
`main`, which is two characters shorter. To prepare for that, let's add
padding to centered lines that will make them briefly uncentered, but
will be re-centered in the commit that performs that rename.
Doing it this way (instead of padding after replacing) makes it easier
to verify the validity of the patch that replaces `master` by `main`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t4013 and t4015, which see independent development
elsewhere at the time of writing, we use `main` as the default branch
name in t4*. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t4*.sh t4211/*.export &&
git checkout HEAD -- t4013\*)
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
