| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Git's test suite is excruciatingly slow on Windows, mainly due to the
fact that it executes a lot of shell script code, and that's simply not
native to Windows.
To help with that, we established the pattern where the artifacts are
first built in one job, and then multiple test jobs run in parallel
using the artifacts built in the first job.
We take pains in transferring only the build outputs, and letting
`actions/checkout` fill in the rest of the files.
One major downside of that strategy is that the test jobs might fail to
check out the intended revision (e.g. because the branch has been
updated while the build was running, as is frequently the case with the
`seen` branch).
Let's transfer also the files tracked by Git, and skip the checkout step
in the test jobs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move away from the "struct ref_list" in bundle.c in favor of the
almost identical string-list.c API.
That API fits this use-case perfectly, but did not exist in its
current form when this code was added in 2e0afafebd (Add git-bundle:
move objects and references by archive, 2007-02-22), with hindsight we
could have used the path-list API, which later got renamed to
string-list. See 8fd2cb4069 (Extract helper bits from
c-merge-recursive work, 2006-07-25)
We need to change "name" to "string" and "oid" to "util" to make this
conversion, but other than that the APIs are pretty much identical for
what bundle.c made use of.
Let's also replace the memset(..,0,...) pattern with a more idiomatic
"INIT" macro, and finally add a *_release() function so to free the
allocated memory.
Before this the add_to_ref_list() would leak memory, now e.g. "bundle
list-heads" reports no memory leaks at all under valgrind.
In the bundle_header_init() function we're using a clever trick to
memcpy() what we'd get from the corresponding
BUNDLE_HEADER_INIT. There is a concurrent series to make use of that
pattern more generally, see [1].
1. https://lore.kernel.org/git/cover-0.5-00000000000-20210701T104855Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for moving away from accessing the OID and name via the
"oid" and "name" slots in a subsequent commit, change the code that
accesses it to use named variables. This makes the subsequent change
smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a memory leak from the prefix_filename() function introduced with
its use in 3b754eedd5 (bundle: use prefix_filename with bundle path,
2017-03-20).
As noted in that commit the leak was intentional as a part of being
sloppy about freeing resources just before we exit, I'm changing this
because I'll be fixing other memory leaks in the bundle API (including
the library version) in subsequent commits. It's easier to reason
about those fixes if valgrind runs cleanly at the end without any
leaks whatsoever.
An earlier version of this change[1] went out of its way to not leak
memory on the die() codepaths here, but doing so will only avoid
reports of potential leaks under heap-only leak trackers such as
valgrind, not the SANITIZE=leak mode.
Avoiding those leaks as well might be useful to enable us to run
cleanly under the likes of valgrind in the future. But for now the
relative verbosity of the resulting code, and the fact that we don't
have some valgrind or SANITIZE=leak mode as part of our CI (it's only
run ad-hoc, see [2]), means we're not worrying about that for now.
1. https://lore.kernel.org/git/87v95vdxrc.fsf@evledraar.gmail.com/
2. https://lore.kernel.org/git/87czsv2idy.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Jiang Xin notified me [1] to fix some typos. Running git-po-helper [2]
check, it found following:
1. git submodule--helper typo (was git submodule==helper)
2. new_index improper translation (DO NOT translate instead)
Fix them.
[1]:
https://lore.kernel.org/git/20210703111837.14894-1-worldhello.net@gmail.com/
[2]:
https://github.com/git-l10n/git-po-helper/commit/e44df847abb91227771560aca56719031f280068
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
|
|
When the TEST_OUTPUT_DIRECTORY is defined, then all test data will be
written in that directory instead of the default directory located in
"t/". While this works as expected for our normal tests, performance
tests fail to locate and aggregate performance data because they don't
know to handle TEST_OUTPUT_DIRECTORY correctly and always look at the
default location.
Fix the issue by adding a `--results-dir` parameter to "aggregate.perl"
which identifies the directory where results are and by making the "run"
script awake of the TEST_OUTPUT_DIRECTORY variable.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change all in-tree users of the string_list_init(LIST, BOOL) API to
use string_list_init_{nodup,dup}(LIST) instead.
As noted in the preceding commit let's leave the now-unused
string_list_init() wrapper in-place for any in-flight users, it can be
removed at some later date.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to use the new "memcpy() a 'blank' struct on the stack"
pattern for string_list_init(), and to make the macro initialization
consistent with the function initialization introduce two new
string_list_init_{nodup,dup}() functions. These are like the old
string_list_init() when called with a false and true second argument,
respectively.
I think this not only makes things more consistent, but also easier to
read. I often had to lookup what the ", 0)" or ", 1)" in these
invocations meant, now it's right there in the function name, and
corresponds to the macros.
A subsequent commit will convert existing API users to this pattern,
but as this is a very common API let's leave a compatibility function
in place for later removal. This intermediate state also proves that
the compatibility function works.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the dir_init() function and replace it with a DIR_INIT
macro. In many cases in the codebase we need to initialize things with
a function for good reasons, e.g. needing to call another function on
initialization. The "dir_init()" function was not one such case, and
could trivially be replaced with a more idiomatic macro initialization
pattern.
The only place where we made use of its use of memset() was in
dir_clear() itself, which resets the contents of an an existing struct
pointer. Let's use the new "memcpy() a 'blank' struct on the stack"
idiom to do that reset.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the common patter in the codebase of duplicating the
initialization logic between an *_INIT macro and a
corresponding *_init() function to use the macro as the canonical
source of truth.
Now we no longer need to keep the function up-to-date with the macro
version. This implements a suggestion by Jeff King who found that
under -O2 [1] modern compilers will init new version in place without
the extra copy[1]. The performance of a single *_init() won't matter
in most cases, but even if it does we're going to be producing
efficient machine code to perform these operations.
1. https://lore.kernel.org/git/YNyrDxUO1PlGJvCn@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move *_INIT macros I'll use in a subsequent commits to designated
initializers. This isn't required for those follow-up changes, but
since next commits will change things in this area, let's use the
modern pattern over the old one while we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a custom match_pattern_list() function which we use for matching
test names (like "t1234") against glob-like patterns (like "t1???") for
$GIT_SKIP_TESTS, --verbose-only, etc.
Those patterns may have multiple whitespace-separated elements (e.g.,
"t0* t1234 t5?78"). The callers of match_pattern_list thus pass the
strings unquoted, so that the shell does the usual field-splitting into
separate arguments.
But this also means the shell will do the usual globbing for each
argument, which can result in us seeing an expansion based on what's in
the filesystem, rather than the real pattern. For example, if I have the
path "t5000" in the filesystem, and you feed the pattern "t?000", that
_should_ match the string "t0000", but it won't after the shell has
expanded it to "t5000".
This has been a bug ever since that function was introduced. But it
didn't usually trigger since we typically use the function inside the
trash directory, which has a very limited set of files that are unlikely
to match. It became a lot easier to trigger after edc23840b0 (test-lib:
bring $remove_trash out of retirement, 2021-05-10), because now we match
$GIT_SKIP_TESTS before even entering the trash directory. So the t5000
example above can be seen with:
GIT_SKIP_TESTS=t?000 ./t0000-basic.sh
which should skip all tests but doesn't.
We can fix this by using "set -f" to ask the shell not to glob (which is
in POSIX, so should hopefully be portable enough). We only want to do
this in a subshell (to avoid polluting the rest of the script), which
means we need to get the whole string intact into the match_pattern_list
function by quoting it. Arguably this is a good idea anyway, since it
makes it much more obvious that we intend to split, and it's not simply
sloppy scripting.
Diagnosed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* zh/cat-file-batch-fix:
cat-file: merge two block into one
cat-file: handle trivial --batch format with --batch-all-objects
|
|
There was no documentation for the --negotiate-only option added in
9c1e657a8fd (fetch: teach independent negotiation (no packfile),
2021-05-04), only documentation for the related push.negotiation
option added in the following commit in 477673d6f39 (send-pack:
support push negotiation, 2021-05-04).
Let's document it, and update the cross-linking I'd added between
--negotiation-tip=* and 'fetch.negotiationAlgorithm' in
526608284a7 (fetch doc: cross-link two new negotiation options,
2018-08-01).
I think it would be better to say "in common with the remote" here
than "...the server", but the documentation for --negotiation-tip=*
above this talks about "the server", so let's continue doing that in
this related option. See 3390e42adb3 (fetch-pack: support negotiation
tip whitelist, 2018-07-02) for that documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the early return if we have no remote refs in send_pack()
earlier.
When this was added in 4c353e890c0 (Warn when send-pack does nothing,
2005-12-04) one of the first things we'd do was to abort, but as of
cfee10a773b (send-pack/receive-pack: allow errors to be reported back
to pusher., 2005-12-25) we've added numerous server_supports()
conditions that are acted on later in the function, that won't be used
if we don't have remote refs.
Then as of 477673d6f39 (send-pack: support push negotiation,
2021-05-04) we started doing even more work on the assumption that we
had some remote refs to feed to --negotiation-tip=* options.
We only hit this condition if we have nothing to push, so we don't
need to consider "push.negotiate" etc. only to do nothing with that
information.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Directory rename detection can cause transitive renames, e.g. if the two
different sides of history each do one half of:
A/file -> B/file
B/ -> C/
then directory rename detection transitively renames to give us
A/file -> C/file
However, when C/ == A/, note that this gives us
A/file -> A/file.
merge-recursive assumed that any rename D -> E would have D != E. While
that is almost always true, the above is a special case where it is not.
So we cannot do things like delete the rename source, we cannot assume
that a file existing at path E implies a rename/add conflict and we have
to be careful about what stages end up in the output.
This change feels a bit hackish. It took me surprisingly many hours to
find, and given merge-recursive's design causing it to attempt to
enumerate all combinations of edge and corner cases with special code
for each combination, I'm worried there are other similar fixes needed
elsewhere if we can just come up with the right special testcase.
Perhaps an audit would rule it out, but I have not the energy.
merge-recursive deserves to die, and since it is on its way out anyway,
fixing this particular bug narrowly will have to be good enough.
Reported-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Path conflicts (typically rename path conflicts, e.g.
rename/rename(1to2) or rename/add/delete), and directory/file conflicts
should obviously result in files not being marked as clean in the merge.
We had a codepath where we missed consulting the path_conflict and
df_conflict flags, based on match_mask. Granted, it requires an unusual
setup to trigger this codepath (directory rename causing rename-to-self
is the only case I can think of), but we still need to handle it. To
make it clear that we have audited the other codepaths that do not
explicitly mention these flags, add some assertions that the flags are
not set.
Reported-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Directory rename detection can cause transitive renames, e.g. if the two
different sides of history each do one half of:
A/file -> B/file
B/ -> C/
then directory rename detection transitively renames to give us C/file.
Since the default for merge.directoryRenames is conflict, this results
in an error message saying it is unclear whether the file should be
placed at B/file or C/file.
What if C/ is A/, though? In such a case, the transitive rename would
give us A/file, the original name we started with. Logically, having
an error message with B/file vs. A/file should be fine, as should
leaving the file where it started. But the logic in both
merge-recursive and merge-ort did not handle a case of a filename being
renamed to itself correctly; merge-recursive had two bugs, and merge-ort
had one. Add some testcases covering such a scenario.
Based-on-testcase-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git grep allows combining two patterns with --and. It checks and
reports if the second pattern is missing when compiling the expression.
A missing first pattern, however, is only reported later at match time.
Thus no error is returned if no matching is done, e.g. because no file
matches the also given pathspec.
When that happens we get an expression tree with an GREP_NODE_AND node
and a NULL pointer to the missing left child. free_pattern_expr()
tries to dereference it during the cleanup at the end, which results
in a segmentation fault.
Fix this by verifying the presence of the left operand at expression
compilation time.
Reported-by: Matthew Hughes <matthewhughes934@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Linux users may benefit from additional information on how to
avoid ENOMEM from mmap despite the system having enough RAM to
accomodate them. We can't reliably unmap pack windows to work
around the issue since malloc and other library routines may
mmap without our knowledge.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests will fail under --verbose because while we've unset COLUMNS
since b1d645b58ac (tests: unset COLUMNS inherited from environment,
2012-03-27), we also look for the columns with an ioctl(..,
TIOCGWINSZ, ...) on some platforms. By setting COLUMNS again we
preempt the TIOCGWINSZ lookup in pager.c's term_columns(), it'll take
COLUMNS over TIOCGWINSZ,
This fixes t0500-progress-display.sh., which broke because of a
combination of the this issue and the progress output reacting to the
column width since 545dc345ebd (progress: break too long progress bar
lines, 2019-04-12). The t5324-split-commit-graph.sh fails in a similar
manner due to progress output, see [1] for details.
The issue is not specific to progress.c, the diff code also checks
COLUMNS and some of its tests can be made to fail in a similar
manner[2], anything that invokes a pager is potentially affected.
See ea77e675e56 (Make "git help" react to window size correctly,
2005-12-18) and ad6c3739a33 (pager: find out the terminal width before
spawning the pager, 2012-02-12) for how the TIOCGWINSZ code ended up
in pager.c
1. http://lore.kernel.org/git/20210624051253.GG6312@szeder.dev
2. https://lore.kernel.org/git/20210627074419.GH6312@szeder.dev/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't show the very verbose $(FIND_SOURCE_FILES) command on every
"make cscope" invocation.
See my recent 3c80fcb591 (Makefile: add QUIET_GEN to "tags" and "TAGS"
targets, 2021-03-28) for the same fix for the other adjacent targets.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the ".PHONY: cscope" rule to live alongside the "cscope" target
itself, not to be all the way near the bottom where we define the
"FORCE" rule.
That line was last modified in 2f76919517e (MinGW: avoid collisions
between "tags" and "TAGS", 2010-09-28).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the GNU make ".DELETE_ON_ERROR" flag in our main Makefile, as we
already do in the Documentation/Makefile since db10fc6c09f (doc:
simplify Makefile using .DELETE_ON_ERROR, 2021-05-21).
Now if a command to make X fails X will be removed, the default
behavior of GNU make is to only do so if "make" itself is interrupted
with a signal.
E.g. if we now intentionally break one of the rules with:
- mv $@+ $@
+ mv $@+ $@ && \
+ false
We'll get output like:
$ make git
CC git.o
LINK git
make: *** [Makefile:2179: git] Error 1
make: *** Deleting file 'git'
$ file git
git: cannot open `git' (No such file or directory)
Before this change we'd leave the file in place in under this
scenario.
As in db10fc6c09f this allows us to remove patterns of removing
leftover $@ files at the start of rules, since previous failing runs
of the Makefile won't have left those littered around anymore.
I'm not as confident that we should be replacing the "mv $@+ $@"
pattern entirely, since that means that external programs or one of
our other Makefiles might race and get partial content.
I'm not changing $(REMOTE_CURL_ALIASES) since that uses a ln/ln -s/cp
dance, and would require the addition of "-f" flags if the "rm" at the
start was removed. I've also got plans to fix that ln/ln -s/cp pattern
in another series.
For $(LIB_FILE) and $(XDIFF_LIB) we can rely on the "c" (create) being
present in ARFLAGS.
I'm not changing "$(ETAGS_TARGET)", "tags" and "cscope" because
they've got a messy combination of removing "$@+" not "$@" at the
beginning, or "$@*". I'm also addressing those in another series.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git multi-pack-index verify' inspects the data in an existing MIDX for
correctness by checking that the recorded object offsets are correct,
and so on.
But it does not check that the file's trailing checksum matches the data
that it records. So, if an on-disk corruption happened to occur in the
final few bytes (and all other data was recorded correctly), we would:
- get a clean result from 'git multi-pack-index verify', but
- be unable to reuse the existing MIDX when writing a new one (since
we now check for checksum mismatches before reusing a MIDX)
Teach the 'verify' sub-command to recognize corruption in the checksum
by calling midx_checksum_valid().
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing a new multi-pack index, Git tries to reuse as much of the
data from an existing MIDX as possible, like object offsets. This is
done to avoid re-opening a bunch of *.idx files unnecessarily, but can
lead to problems if the data we are reusing is corrupt.
That's because we'll blindly reuse data from an existing MIDX without
checking its trailing checksum for validity. So if there is memory
corruption while writing a MIDX, or disk corruption in the intervening
period between writing and reuse, we'll blindly propagate those bad
values forward.
Suppose we experience a memory corruption while writing a MIDX such that
we write an incorrect object offset (or alternatively, the disk corrupts
the data after being written, but before being reused). Then when we go
to write a new MIDX, we'll reuse the bad object offset without checking
its validity. This means that the MIDX we just wrote is broken, but its
trailing checksum is in-tact, since we never bothered to look at the
values before writing.
In the above, a "git multi-pack-index verify" would have caught the
problem before writing, but writing a new MIDX wouldn't have noticed
anything wrong, blindly carrying forward the corrupt offset.
Individual pack indexes check their validity by verifying the crc32
attached to each entry when carrying data forward during a repack.
We could solve this problem for MIDXs in the same way, but individual
crc32's don't make much sense, since their entries are so small.
Likewise, checking the whole file on every read may be prohibitively
expensive if a repository has a lot of objects, packs, or both.
But we can check the trailing checksum when reusing an existing MIDX
when writing a new one. And a corrupt MIDX need not stop us from writing
a new one, since we can just avoid reusing the existing one at all and
pretend as if we are writing a new MIDX from scratch.
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite an existing caller in `git commit-graph verify` to take
advantage of checksum_valid().
Note that the replacement isn't a verbatim cut-and-paste, since the new
function avoids using hashfile at all and instead talks to the_hash_algo
directly, but it is functionally equivalent.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new function which checks the validity of a file's trailing
checksum. This is similar to hashfd_check(), but different since it is
intended to be used by callers who aren't writing the same data (like
`git index-pack --verify`), but who instead want to validate the
integrity of data that they are reading.
Rewrite the first of two callers which could benefit from this new
function in pack-check.c. Subsequent callers will be added in the
following patches.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GitHub Actions to upload/download workflow artifacts saw a major
upgrade since Git's GitHub workflow was established. Let's use it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use a `.bat` script to copy the DLLs in the `vs-build` job, and those
type of scripts are native to CMD, not to PowerShell.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In our continuous builds, Windows is the odd cookie that requires a
complete development environment to be downloaded because there is no
suitable one installed by default on Windows.
Side note: technically, there _is_ a development environment present in
GitHub Actions' build agents: MSYS2. But it differs from Git for
Windows' SDK in subtle points, unfortunately enough so to prevent Git's
test suite from running without failures.
Traditionally, we support downloading this environment (which we
nicknamed `git-sdk-64-minimal`) via a PowerShell scriptlet that accesses
the build artifacts of a dedicated Azure Pipeline (which packages a tiny
subset of the full Git for Windows SDK, containing just enough to build
Git and run its test suite).
This PowerShell script is unfortunately not very robust and sometimes
fails due to network issues.
Of course, we could add code to detect that situation, wait a little,
try again, if it fails again wait a little longer, lather, rinse and
repeat.
Instead of doing all of this in Git's own `.github/workflows/`, though,
let's offload this logic to the new GitHub Action at
https://github.com/marketplace/actions/setup-git-for-windows-sdk
This Action not only downloads and extracts git-sdk-64-minimal _outside_
the worktree (making it no longer necessary to meddle with
`.gitignore` or `.git/info/exclude`), it also adds the `bash.exe` to the
`PATH` and sets the environment variable `MSYSTEM` (an implementation
detail that Git's workflow should never have needed to know about).
This allows us to convert all those funny PowerShell tasks that wanted
to call git-sdk-64-minimal's `bash.exe`: they all are now regular `bash`
scriptlets.
This finally lets us get rid of the funny quoting and escaping where we
had to pay attention not only to quote and escape the Bash scriptlets
properly, but also to add a second level of escaping (with backslashes
for double quotes and backticks for dollar signs) to stop PowerShell
from doing unintended things.
Further, this Action uses a fast caching strategy native to GitHub
Actions that should accelerate the download across CI runs:
git-sdk-64-minimal is usually updated once per 24h, and needs to be
cached only once within that period. Caching it (unfortunately only on
a per-branch basis) speeds up the download step, and makes it much more
robust at the same time by virtue of accessing a cache location that is
closer in the network topology.
With this we can drop the home-rolled caching where we try to accelerate
the test phase by uploading git-sdk-64-minimal as a workflow artifact
after using it to build Git, and then download it as workflow artifact
in the test phase.
Even better: the `vs-test` job no longer needs to depend on the
`windows-build` job. The only reason it depended on it was to ensure
that the `git-sdk-64-minimal` workflow artifact was available.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have two types (a decoration type and an object type) in the
function, let's give them both unique names to avoid accidentally using
one instead of the other.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we load the ref decorations, we parse the object pointed to by each
ref in order to get a "struct object". This is unnecessarily expensive;
we really only need the object struct, and don't even look at the parsed
contents. The exception is tags, which we do need to peel.
We can improve this by looking up the object type first (which is much
cheaper), and skipping the parse entirely for non-tags. This increases
the work slightly for annotated tags (which now do a type lookup _and_ a
parse), but decreases it a lot for other types. On balance, this seems
to be a good tradeoff.
In my git.git clone, with ~2k refs, most of which are branches, the time
to run "git log -1 --decorate" drops from 34ms to 11ms. Even on my
linux.git clone, which contains mostly tags and only a handful of
branches, the time drops from 30ms to 19ms. And on a more extreme
real-world case with ~220k refs, mostly non-tags, the time drops from
2.6s to 650ms.
That command is a lop-sided example, of course, because it does as
little non-loading work as possible. But it does show the absolute time
improvement. Even in something like a full "git log --decorate" on that
extreme repo, we'd still be saving 2s of CPU time.
Ideally we could push this even further, and avoid parsing even tags, by
relying on the packed-refs "peel" optimization (which we could do by
calling peel_iterated_oid() instead of peeling manually). But we can't
do that here. The packed-refs file only stores the bottom-layer of the
peel (so in a "tag->tag->commit" chain, it stores only the commit as the
peel result). But the decoration code wants to peel the layers
individually, annotating the middle layers of the chain.
If the packed-refs file ever learns to store all of the peeled layers,
then we could switch to it. Or even if it stored a flag to indicate the
peel was not multi-layer (because most of them aren't), then we could
use it most of the time and fall back to a manual peel for the rare
cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases it's useful for efficiency reasons to get the type of an
object before deciding whether to parse it, but we still want an object
struct. E.g., in reachable.c, bitmaps give us the type, but we just want
to mark flags on each object. Likewise, we may loop over every object
and only parse tags in order to peel them; checking the type first lets
us avoid parsing the non-tags.
But our lookup_blob(), etc, functions make getting an object struct
annoying: we have to call the right function for every type. And we
cannot just use the generic lookup_object(), because it only returns an
already-seen object; it won't allocate a new object struct.
Let's provide a function that dispatches to the correct lookup_*
function based on a run-time type. In fact, reachable.c already has such
a helper, so we'll just make that public.
I did change the return type from "void *" to "struct object *". While
the former is a clever way to avoid casting inside the function, it's
less safe and less informative to people reading the function
declaration.
The next commit will add a new caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The lookup_unknown_object() system is not often used and is somewhat
confusing. Let's try to explain it a bit more (which is especially
important as I'm adding a related but slightly different function in the
next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If no --decorate option is given, we default to auto-decoration. And
when that kicks in, cmd_log_init_finish() will unconditionally load the
decoration refs.
However, if we are using a user-format that does not include "%d" or
"%D", we won't show the decorations at all, so we don't need to load
them. We can detect this case and auto-disable them by adding a new
field to our userformat_want helper. We can do this even when the user
explicitly asked for --decorate, because it can't affect the output at
all.
This patch consistently reduces the time to run "git log -1 --format=%H"
on my git.git clone (with ~2k refs) from 34ms to 7ms. On a much more
extreme real-world repository (with ~220k refs), it goes from 2.5s to
4ms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The comment only mentions "notes", but there are more fields now (and
I'm about to add another). Let's make it more general, and stick the
struct next to the function to make the list of possibilities obvious.
While we're touching this comment, let's also mention the behavior of
NULL, which some callers rely on (though in the long run, this global is
pretty nasty and probably should get moved into rev_info).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Over time when parts of submodule have been ported from shell to
builtin, many instances of the submodule helper have been added.
Also added with them are some unnecessary option passing
logic that are based on the `prefix` shell variable which never
gets set in their code flows.
On analysis, the only shell functions which have a valid usage
for the `prefix` shell variable are:
- cmd_update: which is the only function which sets the variable
and thus uses it properly
- cmd_init: which uses the variable via a call from cmd_update
So, remove the unnecessary option parsing logic based on the `prefix`
shell variable.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cover blindspots in the testing of stdin handling, including the
"!len" condition added in b5d97e6b0a0 (pack-objects: run rev-list
equivalent internally., 2006-09-04). The codepath taken with --revs
and read_object_list_from_stdin() acts differently in some of these
common cases, let's test for those.
The "--stdin --revs" test being added here stresses the combination of
--stdin-packs and the revision.c --stdin argument, some of this was
covered in a test added in 339bce27f4f (builtin/pack-objects.c: add
'--stdin-packs' option, 2021-02-22), but let's make sure that
GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=true keeps erroring out about
--stdin, and it isn't picked up by the revision.c API's handling of
that option.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git for Windows is compiled with a runtime prefix, and that runtime
prefix is typically `C:/Program Files/Git/mingw64`. As we want the
system gitconfig to live in the sibling directory `etc`, we define the
relative path as `../etc/gitconfig`.
However, as reported by Philip Oakley, the output of `git config
--show-origin --system -l` looks rather ugly, as it shows the path as
`file:C:/Program Files/Git/mingw64/../etc/gitconfig`, i.e. with the
`mingw64/../` part.
By normalizing the path, we get a prettier path.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, when Git for Windows is built with CMake, the system Git config is
expected in a different location than when building via `make`: the former
expects it to be in `<runtime-prefix>/mingw64/etc/gitconfig`, the latter in
`<runtime-prefix>/etc/gitconfig`.
Because of this, things like `git clone` do not work correctly (because cURL is
no longer able to find its certificate bundle that it needs to validate HTTPS
certificates). See the full bug report and discussion here:
https://github.com/git-for-windows/git/issues/3071#issuecomment-789261386.
This commit aligns the CMake-based build by mimicking what is already done in
`config.mak.uname`.
This closes https://github.com/git-for-windows/git/issues/3071.
Signed-off-by: Dennis Ameling <dennis@dennisameling.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git for Windows' prefix is `/mingw64/` (or `/mingw32/` for 32-bit
versions), therefore the system config is located at the clunky location
`C:\Program Files\Git\mingw64\etc\gitconfig`.
This moves the system config into a more logical location: the `mingw64`
part of `C:\Program Files\Git\mingw64\etc\gitconfig` never made sense,
as it is a mere implementation detail. Let's skip the `mingw64` part and
move this to `C:\Program Files\Git\etc\gitconfig`.
Side note: in the rare (and not recommended) case a user chooses to
install 32-bit Git for Windows on a 64-bit system, the path will of
course be `C:\Program Files (x86)\Git\etc\gitconfig`.
Background: During the Git for Windows v1.x days, the system config was
located at `C:\Program Files (x86)\Git\etc\gitconfig`. With Git for
Windows v2.x, it moved to `C:\Program Files\Git\mingw64\gitconfig` (or
`C:\Program Files (x86)\Git\mingw32\gitconfig`). Rather than fixing it
back then, we tried to introduce a "Windows-wide" config, but that never
caught on.
Likewise, we move the system `gitattributes` into the same directory.
Obviously, we are cautious to do this only for the known install
locations `/mingw64` and `/mingw32`; If anybody wants to override that
while building their version of Git (e.g. via `make prefix=$HOME`), we
leave the default location of the system config and gitattributes alone.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Style issue: a space was missing.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix (chose -> choose) in the documentation of the patch option
under the commit command.
Signed-off-by: Beshr Kayali <me@beshr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We query `TIOCGWINSZ` in Git to determine the correct value for
`COLUMNS`, and then set that environment variable.
If `TIOCGWINSZ` is not available, we fall back to the hard-coded value
80 _and still_ set the environment variable.
On Windows this is a problem. The reason is that Git for
Windows uses a version of `less` that relies on the MSYS2 runtime to
interact with the pseudo terminal (typically inside a MinTTY window,
which is also aware of the MSYS2 runtime). Both MinTTY and `less.exe`
interact with that pseudo terminal via `ioctl()` calls (which the MSYS2
runtime emulates even if there is no such thing on Windows).
Since https://github.com/gwsw/less/commit/bb0ee4e76c2, `less` prefers
the `COLUMNS` variable over asking ncurses itself.
But `git.exe` itself is _not_ aware of the MSYS2 runtime, or for that
matter of that pseudo terminal, and has no way to call `ioctl()` or
`TIOCGWINSZ`.
Therefore, `git.exe` will fall back to hard-coding 80 columns, no matter
what the actual terminal size is.
But `less.exe` is totally able to interact with the MSYS2 runtime and
would not actually require Git's help (which actually makes things
worse here). So let's not override `COLUMNS` on Windows.
Let's just not set `COLUMNS` unless we managed to query the actual value
from the terminal.
This fixes https://github.com/git-for-windows/git/issues/3235
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Both in t4258 and in t9001, the code of the tests following shows the
proper name for the configuration variables. So use the correct names
in the test messages as well.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As can be seen in files "Documentation/blame-options.txt" and
"builtin/blame.c", the name of this configuration option is
"blame.markUnblamableLines".
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is one step towards supporting partial clone submodules.
Even after this patch, we will still lack partial clone submodules
support, primarily because a lot of Git code that accesses submodule
objects does so by adding their object stores as alternates, meaning
that any lazy fetches that would occur in the submodule would be done
based on the config of the superproject, not of the submodule. This also
prevents testing of the functionality in this patch by user-facing
commands. So for now, test this mechanism using a test helper.
Besides that, there is some code that uses the wrapper functions
like has_promisor_remote(). Those will need to be checked to see if they
could support the non-wrapper functions instead (and thus support any
repository, not just the_repository).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
submodule.c has functionality that prepares the environment for running
a subprocess in a new repo. The lazy-fetching code (used in partial
clones) will need this in a subsequent commit, so move it to a more
central location.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
