| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While comparing an index to a tree, we may see a sparse directory entry.
In this case, we should compare that portion of the tree to the tree
represented by that entry. This could include a new tree which needs to
be expanded to a full list of added files. It could also include an
existing tree, in which case all of the changes inside are important to
describe, including the modifications, additions, and deletions. Note
that the case where the tree has a path and the index does not remains
identical to before: the lack of a cache entry is the same with a sparse
index.
Use diff_tree_oid() appropriately to compute the diff.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we have sparse directory entries in the index, we want to compare
that directory against sparse-checkout patterns. Those pattern matching
algorithms are built expecting a file path, not a directory path. This
is especially important in the "cone mode" patterns which will match
files that exist within the "parent directories" as well as the
recursive directory matches.
If path_matches_pattern_list() is given a directory, we can add a fake
filename ("-") to the directory and get the same results as before,
assuming we are in cone mode. Since sparse index requires cone mode
patterns, this is an acceptable assumption.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During unpack_callback(), index entries are compared against tree
entries. These are matched according to names and types. One goal is to
decide if we should recurse into subtrees or simply operate on one index
entry.
In the case of a sparse-directory entry, we do not want to recurse into
that subtree and instead simply compare the trees. In some cases, we
might want to perform a merge operation on the entry, such as during
'git checkout <commit>' which wants to replace a sparse tree entry with
the tree for that path at the target commit. We extend the logic within
unpack_single_entry() to create a sparse-directory entry in this case,
and then that is sent to call_unpack_fn().
There are some subtleties in this process. For instance, we need to
update find_cache_entry() to allow finding a sparse-directory entry that
exactly matches a given path. Use the new helper method
sparse_dir_matches_path() for this. We also need to ignore conflict
markers in the case that the entries correspond to directories and we
already have a sparse directory entry.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the next change, we will use this method to unpack a sparse directory
entry, so change the name to unpack_single_entry() so these entries
apply. The new name reflects that we will not recurse into trees in
order to resolve the conflicts.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we further integrate the sparse-index into unpack-trees, we need to
ensure that we compare sparse directory entries correctly with other
entries. This affects searching for an exact path as well as sorting
index entries.
Sparse directory entries contain the trailing directory separator. This
is important for the sorting, in particular. Thus, within
do_compare_entry() we stop using S_IFREG in all cases, since sparse
directories should use S_IFDIR to indicate that the comparison should
treat the entry name as a dirctory.
Within compare_entry(), it first calls do_compare_entry() to check the
leading portion of the name. When the input path is a directory name, we
could match exactly already. Thus, we should return 0 if we have an
exact string match on a sparse directory entry. The final check is a
length comparison between the strings.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cache_bottom member of 'struct unpack_trees_options' is used to
track the range of index entries corresponding to a node of the cache
tree. While recursing with traverse_by_cache_tree(), this value is
preserved on the call stack using a local and then restored as that
method returns.
The mark_ce_used() method normally modifies the cache_bottom member when
it refers to the marked cache entry. However, sparse directory entries
are stored as nodes in the cache-tree data structure as of 2de37c53
(cache-tree: integrate with sparse directory entries, 2021-03-30). Thus,
the cache_bottom will be modified as the cache-tree walk advances. Do
not update it as well within mark_ce_used().
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before moving to update 'git status' and 'git add' to work with sparse
indexes, add an explicit test that ensures the sparse-index works the
same as a normal sparse-checkout when the worktree contains directories
and files outside of the sparse cone.
Specifically, 'folder1/a' is a file in our test repo, but 'folder1' is
not in the sparse cone. When 'folder1/a' is modified, the file is not
shown as modified and adding it will fail. This is new behavior as of
a20f704 (add: warn when asked to update SKIP_WORKTREE entries,
2021-04-08). Before that change, these adds would be silently ignored.
Untracked files are fine: adding new files both with 'git add .' and
'git add folder1/' works just as in a full checkout. This may not be
entirely desirable, but we are not intending to change behavior at the
moment, only document it. A future change could alter the behavior to
be more sensible, and this test could be modified to satisfy the new
expected behavior.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As more features integrate with the sparse-index feature, more and more
special cases arise that require different data shapes within the tree
structure of the repository in order to demonstrate those cases.
Add several interesting special cases all at once instead of sprinkling
them across several commits. The interesting cases being added here are:
* Add sparse-directory entries on both sides of directories within the
sparse-checkout definition.
* Add directories outside the sparse-checkout definition who have only
one entry and are the first entry of a directory with multiple
entries.
* Add filenames adjacent to a sparse directory entry that sort before
and after the trailing slash.
Later tests will take advantage of these shapes, but they also deepen
the tests that already exist.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes the test data shape to be as expected, allowing rename
detection to work properly now that the 'larger-content' file actually
has meaningful lines.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating a full index from a sparse one, we create cache entries
for every blob within a given sparse directory entry. These are
correctly marked with the CE_SKIP_WORKTREE flag, but the CE_EXTENDED
flag is not included. The CE_EXTENDED flag would exist if we loaded a
full index from disk with these entries marked with CE_SKIP_WORKTREE, so
we can add the flag here to be consistent. This allows us to directly
compare the flags present in cache entries when testing the sparse-index
feature, but has no significance to its correctness in the user-facing
functionality.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse-index format is designed to be compatible with merge
conflicts, even those outside the sparse-checkout definition. The reason
is that when converting a full index to a sparse one, a cache entry with
nonzero stage will not be collapsed into a sparse directory entry.
However, this behavior was not tested, and a different behavior within
convert_to_sparse() fails in this scenario. Specifically,
cache_tree_update() will fail when unmerged entries exist.
convert_to_sparse_rec() uses the cache-tree data to recursively walk the
tree structure, but also to compute the OIDs used in the
sparse-directory entries.
Add an index scan to convert_to_sparse() that will detect if these merge
conflict entries exist and skip the conversion before trying to update
the cache-tree. This is marked as NEEDSWORK because this can be removed
with a suitable update to cache_tree_update() or a similar method that
can construct a cache-tree with invalid nodes, but still allow creating
the nodes necessary for creating sparse directory entries.
It is possible that in the future we will not need to make such an
update, since if we do not expand a sparse-index into a full one, this
conversion does not need to happen. Thus, this can be deferred until the
merge machinery is made to integrate with the sparse-index.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Occasionally we receive reviews after patches were integrated, where
`sparse` (https://sparse.docs.kernel.org/en/latest/ has more information
on that project) identified problems such as file-local variables or
functions being declared as global.
By running `sparse` as part of our Continuous Integration, we can catch
such things much earlier. Even better: developers who activated GitHub
Actions on their forks can catch such issues before even sending their
patches to the Git mailing list.
This addresses https://github.com/gitgitgadget/git/issues/345
Note: Not even Ubuntu 20.04 ships with a new enough version of `sparse`
to accommodate Git's needs. The symptom looks like this:
add-interactive.c:537:51: error: Using plain integer as NULL pointer
To counter that, we download and install the custom-built `sparse`
package from the Azure Pipeline that we specifically created to address
this issue.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 88473c8bae ("load_ref_decorations(): avoid parsing non-tag
objects", 2021-06-22) introduced a shortcut to `add_ref_decoration()`:
Rather than calling `parse_object()`, we go for `oid_object_info()` and
then `lookup_object_by_type()` using the type just discovered. As
detailed in the commit message, this provides a significant time saving.
Unfortunately, it also changes the behavior: We lose all annotated tags
from the decoration.
The reason this happens is in the loop where we try to peel the tags, we
won't necessarily have parsed that first object. If we haven't, its
`tagged` field will be NULL, so we won't actually add a decoration for
the pointed-to object.
Make sure to parse the tag object at the top of the peeling loop. This
effectively restores the pre-88473c8bae parsing -- but only of tags,
allowing us to keep most of the possible speedup from 88473c8bae.
On my big ~220k ref test case (where it's mostly non-tags), the
timings [using "git log -1 --decorate"] are:
- before either patch: 2.945s
- with my broken patch: 0.707s
- with [this patch]: 0.788s
The simplest way to do this is to just conditionally parse before the
loop:
if (obj->type == OBJ_TAG)
parse_object(&obj->oid);
But we can observe that our tag-peeling loop needs to peel already, to
examine recursive tags-of-tags. So instead of introducing a new call to
parse_object(), we can simply move the parsing higher in the loop:
instead of parsing the new object before we loop, parse each tag object
before we look at its "tagged" field.
This has another beneficial side effect: if a tag points at a commit (or
other non-tag type), we do not bother to parse the commit at all now.
And we know it is a commit without calling oid_object_info(), because
parsing the surrounding tag object will have created the correct in-core
object based on the "type" field of the tag.
Our test coverage for --decorate was obviously not good, since we missed
this quite-basic regression. The new tests covers an annotated tag
(showing the fix), but also that we correctly show annotations for
lightweight tags and double-annotated tag-of-tags.
Reported-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- default lock string, "added with --lock"
- temporary lock string, "initializing"
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
- remove unneeded `git rev-parse` which must have come from a copy-paste
of another test
- unlock the worktree with test_when_finished
Signed-off-by: Stephen Manz <smanz@alum.mit.edu>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git grep --and -e foo" ought to have been diagnosed as an error
but instead segfaulted, which has been corrected.
* rs/grep-parser-fix:
grep: report missing left operand of --and
|
|
Doc typo/grammo-fix.
* bk/doc-commit-typofix:
Documentation: fix typo in the --patch option of the commit command
|
|
Prevent "git p4" from failing to submit changes to binary file.
* dc/p4-binary-submit-fix:
git-p4: fix failed submit by skip non-text data files
|
|
Test fix.
* ab/pre-auto-gc-hook-test:
gc tests: add a test for the "pre-auto-gc" hook
|
|
The "union" conflict resolution variant misbehaved when used with
binary merge driver.
* jk/union-merge-binary:
ll_union_merge(): rename path_unused parameter
ll_union_merge(): pass name labels to ll_xdl_merge()
ll_binary_merge(): handle XDL_MERGE_FAVOR_UNION
|
|
CMake update.
* mr/cmake:
cmake: add warning for ignored MSGFMT_EXE
cmake: create compile_commands.json by default
cmake: add knob to disable vcpkg
|
|
Various updates to tests around "git describe"
* ab/describe-tests-fix:
describe tests: support -C in "check_describe"
describe tests: fix nested "test_expect_success" call
describe tests: don't rely on err.actual from "check_describe"
describe tests: refactor away from glob matching
describe tests: improve test for --work-tree & --dirty
|
|
Rewrite the backend for "diff -G/-S" to use pcre2 engine when
available.
* ab/pickaxe-pcre2: (22 commits)
xdiff-interface: replace discard_hunk_line() with a flag
xdiff users: use designated initializers for out_line
pickaxe -G: don't special-case create/delete
pickaxe -G: terminate early on matching lines
xdiff-interface: allow early return from xdiff_emit_line_fn
xdiff-interface: prepare for allowing early return
pickaxe -S: slightly optimize contains()
pickaxe: rename variables in has_changes() for brevity
pickaxe -S: support content with NULs under --pickaxe-regex
pickaxe: assert that we must have a needle under -G or -S
pickaxe: refactor function selection in diffcore-pickaxe()
perf: add performance test for pickaxe
pickaxe/style: consolidate declarations and assignments
diff.h: move pickaxe fields together again
pickaxe: die when --find-object and --pickaxe-all are combined
pickaxe: die when -G and --pickaxe-regex are combined
pickaxe tests: add missing test for --no-pickaxe-regex being an error
pickaxe tests: test for -G, -S and --find-object incompatibility
pickaxe tests: add test for "log -S" not being a regex
pickaxe tests: add test for diffgrep_consume() internals
...
|
|
Preliminary clean-up of tests before the main reftable changes
hits the codebase.
* hn/prep-tests-for-reftable: (22 commits)
t1415: set REFFILES for test specific to storage format
t4202: mark bogus head hash test with REFFILES
t7003: check reflog existence only for REFFILES
t7900: stop checking for loose refs
t1404: mark tests that muck with .git directly as REFFILES.
t2017: mark --orphan/logAllRefUpdates=false test as REFFILES
t1414: mark corruption test with REFFILES
t1407: require REFFILES for for_each_reflog test
test-lib: provide test prereq REFFILES
t5304: use "reflog expire --all" to clear the reflog
t5304: restyle: trim empty lines, drop ':' before >
t7003: use rev-parse rather than FS inspection
t5000: inspect HEAD using git-rev-parse
t5000: reformat indentation to the latest fashion
t1301: fix typo in error message
t1413: use tar to save and restore entire .git directory
t1401-symbolic-ref: avoid direct filesystem access
t1401: use tar to snapshot and restore repo state
t5601: read HEAD using rev-parse
t9300: check ref existence using test-helper rather than a file system check
...
|
|
Some more code and doc clarification around "git push".
* fc/push-simple-updates-cleanup:
push: don't get a full remote object
push: only check same_remote when needed
push: remove trivial function
push: remove redundant check
push: factor out the typical case
push: get rid of all the setup_push_* functions
push: trivial simplifications
push: make setup_push_* return the dst
push: only get the branch when needed
push: factor out null branch check
push: split switch cases
push: return immediately in trivial switch case
push: create new get_upstream_ref() helper
|
|
Some code and doc clarification around "git push".
* fc/push-simple-updates:
doc: push: explain default=simple correctly
push: remove unused code in setup_push_upstream()
push: simplify setup_push_simple()
push: reorganize setup_push_simple()
push: copy code to setup_push_simple()
push: hedge code of default=simple
push: rename !triangular to same_remote
|
|
"git cat-file --batch-all-objects"" misbehaved when "--batch" is in
use and did not ask for certain object traits.
* zh/cat-file-batch-fix:
cat-file: merge two block into one
cat-file: handle trivial --batch format with --batch-all-objects
|
|
Reported-by: Jason Hatton <jhatton@globalfinishing.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the missing __attribute__((format)) checking to
advise_if_enabled(). This revealed a trivial issue introduced in
b3b18d16213 (advice: revamp advise API, 2020-03-02). We treated the
argv[1] as a format string, but did not intend to do so. Let's use
"%s" and pass argv[1] as an argument instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing format attributes to API functions that take printf
arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing __attribute__((format)) function attributes to various
"static" functions that take printf arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `git diff --merge-base` was introduced at around Git 2.30, the
documentation included a few errors.
In the example given for `git diff --cached --merge-base`, the
`--cached` flag was omitted for the `--merge-base` example. Add the
missing flag.
In the `git diff <commit>` case, we failed to mention that
`--merge-base` is an available option. Give the usage of `--merge-base`
as an option there.
Finally, there are two errors in the usage of `git diff`. Firstly, we do
not mention `--merge-base` in the `git diff --cached` case. Mention it
so that it's consistent with the documentation. Secondly, we put the
`[--merge-base]` in between `<commit>` and `[<commit>...]`. Move the
`[--merge-base]` so that it's beside `[<options>]` which is a more
logical grouping.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the reflog_message() function added in
96e832a5fd6 (sequencer (rebase -i): refactor setting the reflog
message, 2017-01-02), it gained another user in
9055e401dd6 (sequencer: introduce new commands to reset the revision,
2018-04-25). Let's move it around and remove the forward declaration
added in the latter commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
9cf6d3357aa (Add git-index-pack utility, 2005-10-12) and
466dbc42f58 (receive-pack: Send internal errors over side-band #2,
2010-02-10) we added these static functions and forward-declared their
__attribute__((printf)).
I think this may have been to work around some compiler limitation at
the time, but in any case we have a lot of code that uses the briefer
way of declaring these that I'm using here, so if we had any such
issues with compilers we'd have seen them already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's add a new "add-clone" subcommand to `git submodule--helper` with
the goal of converting part of the shell code in git-submodule.sh
related to `git submodule add` into C code. This new subcommand clones
the repository that is to be added, and checks out to the appropriate
branch.
This is meant to be a faithful conversion that leaves the behaviour of
'cmd_add()' script unchanged.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Prathamesh Chavan <pc44800@gmail.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Separate out the core logic of module_clone() from the flag
parsing---this way we can call the equivalent of the `submodule--helper
clone` subcommand directly within C, without needing to push arguments
in a strvec.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The standard `die()` function that is used in C code prefixes all the
messages passed to it with 'fatal: '. This does not happen with the
`die` used in 'git-submodule.sh'.
Let's prefix each of the shell die messages with 'fatal: ' so that when
they are converted to C code, the error messages stay the same as before
the conversion.
Note that the shell version of `die` exits with error code 1, while the
C version exits with error code 128. In practice, this does not change
any behaviour, as no functionality in 'submodule add' and 'submodule
update' relies on the value of the exit code.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In general, we encourage users to use plumbing commands, like git
rev-list, over porcelain commands, like git log, when scripting.
However, git rev-list has one glaring problem that prevents it from
being used in certain cases: when --pretty is used with a custom format,
it always prints out a line containing "commit" and the object ID. This
makes it unsuitable for many scripting needs, and forces users to use
git log instead.
While we can't change this behavior for backwards compatibility, we can
add an option to suppress this behavior, so let's do so, and call it
"--no-commit-header". Additionally, add the corresponding positive
option to switch it back on.
Note that this option doesn't affect the built-in formats, only custom
formats. This is exactly the same behavior as users already have from
git log and is what most users will be used to.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even when the `--allow-empty-message` option is given, "git commit"
offers an interactive editor session with prefilled message that says
the commit will be aborted if the buffer is emptied, which is wrong.
Remove the "an empty message aborts" part from the message when the
option is given to fix it.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Helped-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Hu Jialun <hujialun@comp.nus.edu.sg>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Strings of hint messages inserted into editor on interactive commit was
scattered in-line, rendering the code harder to understand at first
glance.
Extract those messages out into separate variables to make the code
outline easier to follow.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Hu Jialun <hujialun@comp.nus.edu.sg>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a segfault in the --stdin-packs option added in
339bce27f4f (builtin/pack-objects.c: add '--stdin-packs' option,
2021-02-22).
The read_packs_list_from_stdin() function didn't check that the lines
it was reading were valid packs, and thus when doing the QSORT() with
pack_mtime_cmp() we'd have a NULL "util" field. The "util" field is
used to associate the names of included/excluded packs with the
packed_git structs they correspond to.
The logic error was in assuming that we could iterate all packs and
annotate the excluded and included packs we got, as opposed to
checking the lines we got on stdin. There was a check for excluded
packs, but included packs were simply assumed to be valid.
As noted in the test we'll not report the first bad line, but whatever
line sorted first according to the string-list.c API. In this case I
think that's fine. There was further discussion of alternate
approaches in [1].
Even though we're being lazy let's assert the line we do expect to get
in the test, since whoever changes this code in the future might miss
this case, and would want to update the test and comments.
1. http://lore.kernel.org/git/YND3h2l10PlnSNGJ@nand.local
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 0181b600a6 (pkt-line: define PACKET_READ_RESPONSE_END, 2020-05-19),
the Response End packet was defined for Git's network protocol. When the
patch was sent, it included an oversight where the error messages
referenced "stateless separator", the work-in-progress name, over
"response end", the final name chosen.
Correct these error messages by having them correctly reference
a "response end" packet.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Andrei pointed out a typo in the Swedish translation, where a config
variable name had been copied incorrectly.
By introducing typo detection function in "git-po-helper", more typos
were found. All easy-to-fix typos were fixed in this commit.
Reported-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we cannot figure out how wide the terminal is, we use a
fallback value of 80 ourselves (which cannot be avoided), but when
we run the pager, we export it in COLUMNS, which forces the pager
to use the hardcoded value, even when the pager is perfectly
capable to figure it out itself. Stop exporting COLUMNS when we
fall back on the hardcoded default value for our own use.
* js/stop-exporting-bogus-columns:
pager: avoid setting COLUMNS when we're guessing its value
|
|
Doc clean-up.
* dd/document-log-decorate-default:
doc/log: correct default for --decorate
|
|
Test code clean-up.
* ar/test-code-cleanup:
t: fix whitespace around &&
|
|
Code clean-up.
* ba/object-info:
protocol-caps.h: add newline at end of file
|
