| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Doc update.
* kh/doc-am-xref:
doc: am: correct to full --no-message-id
doc: am: revert Message-ID trailer claim
|
|
The glossary entry is a list of terms and their definitions, so
multi-paragraph definitions need "+" continuation lines to indicate
that they are part of a single entry.
When an entry contains a sub-list (say, a bulleted list), the final "+"
may become ambiguous: is it connecting the next paragraph to the final
entry of the sub-list, or to the original list of definition paragraphs?
Asciidoc generally connects it to the former, even when we mean the
latter, and you end up with the next paragraph indented incorrectly,
like this:
glob
...defines glob...
Two consecutive asterisks ("**") in patterns matched
against full pathname may have special meaning:
- ...some special meaning of **...
- ...another special meaning of **...
- Other consecutive asterisks are considered invalid.
Glob magic is incompatible with literal magic.
That final "Glob magic is incompatible" paragraph is in the wrong spot.
It should be at the same level as "Two consecutive asterisks", as it is
not part of the final "Other consecutive asterisks" bullet point.
The same problem appears in several other spots in the glossary.
Usually we'd fix this by using "--" markers, which put the sub-list into
its own block. But there's a catch: in some of these spots we are
already in an open block, and nesting open blocks is a problem. It seems
to work for me using Asciidoc 10.2.1, but Asciidoctor 2.0.26 makes a
mess of it (our intent to open a new block seems to close the old one).
Fortunately there's a work-around: when using a "+" list-continuation,
the number of empty lines above the continuation indicates which level
of parent list to continue. So by adding an empty line after our
unordered list (before the "+"), we should be able to continue the
definition list item.
But asciidoc being asciidoc, of course that is not the end of the story.
That technique works fine for the "glob" and "attr" lists in this patch,
but under the "refs" item it works for only 1 of the 2 lists! I can't
figure out why, and this may be an asciidoctor bug. But we can work
around it by using "--" open-block markers here, since we're not
already in an open block.
So using the extra blank line for the first two instances, and "--"
markers for the second two, this patch produces identical output from
"doc-diff HEAD^ HEAD" for both --asciidoctor and --asciidoc modes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
GitHub Actions started complaining about use of Node.js 20 and I was
wondering why only one job uses actions/checkout@v4, while everybody
else already uses actions/checkout@v5.
It turns out that it is caused by a semantic mismerge between
e75cd059 (ci: check formatting of our Rust code, 2025-10-15) that
added a new use of actions/checkout@v4 that happened very close to
another change 63541ed9 (build(deps): bump actions/checkout from 4
to 5, 2025-10-16) that updated all uses of actions/checkout@v4 to
use vactions/checkout@v5.
Update the leftover and the last use of actions/checkout@v4 to use
actions/checkout@v5 to help ourselves to move away from Node.js 20.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I claimed in 3c18135b (doc: am: say that --message-id adds a trailer,
2026-02-09) that `git am --message-id` adds a Git trailer. But that
isn’t the case; for the case of a commit message with a subject, body,
and no trailer block:
<subject>
<paragrah>
It just appends the line right after `paragraph`:
<subject>
<paragraph>
Message-ID: <message-id_trailer.323@msgid.xyz>
It does work for two other cases though, namely subject-only and with an
existing trailer block.
This is at best an inconsistency and arguably a bug, but we’re at the
trailing end of the release cycle now. So reverting the doc is safer
than making msg-id act as a trailer, for now.
Revert this hunk from commit 3c18135b except the only useful
change (“Also use inline-verbatim for `Message-ID`”).
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We used writev() in limited code paths and supplied emulation for
platforms without working writev(), but the emulation was too
faithful to the spec to make the result useless to send even 64kB;
revert the topic and plan to restart the effort later.
* jc/no-writev-does-not-work:
Revert "compat/posix: introduce writev(3p) wrapper"
Revert "wrapper: introduce writev(3p) wrappers"
Revert "sideband: use writev(3p) to send pktlines"
Revert "cmake: use writev(3p) wrapper as needed"
|
|
Doc update.
* ps/archive-prefix-doc:
archive: document --prefix handling of absolute and parent paths
|
|
Doc update.
* bc/ref-storage-default-doc-update:
docs: correct information about reftable
|
|
Earlier we timelined that we'd tune our build procedures to build
with Rust by default in Git 2.53, but we are already in prerelease
freeze for 2.54 now. Update the BreakingChanges document to delay
it until Git 2.55 (slated for the end of June 2026).
Noticed-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recently fixed a bug in commit 2226ffaacd (run_processes_parallel():
fix order of sigpipe handling, 2026-04-08) where a hook that caused us
to get SIGPIPE would accidentally trigger the run_processes_parallel()
cleanup handler killing the child processes.
For a single hook, this meant killing the already-exited hook. This case
was triggered by our tests, but was only a problem on some platforms.
But if you have multiple hooks running in parallel, this causes a
problem everywhere, since one hook failing to read its input would take
down all hooks. Now that we have parallel hook support, we can add a
test for this case. It should pass already, due to the existing fix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow -1 as a value for hook.jobs, hook.<event>.jobs, and the -j
CLI flag to mean "use as many jobs as there are CPU cores", matching
the convention used by fetch.parallel and other Git subsystems.
The value is resolved to online_cpus() at parse time so the rest
of the code always works with a positive resolved count.
Other non-positive values (0, -2, etc) are rejected with a warning
(config) or die (CLI).
Suggested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a hook.<event>.enabled config key that disables all hooks for
a given event, when set to false, acting as a high-level switch
above the existing per-hook hook.<friendly-name>.enabled.
Event-disabled hooks are shown in "git hook list" with an
"event-disabled" tab-separated prefix before the name:
$ git hook list test-hook
event-disabled hook-1
event-disabled hook-2
With --show-scope:
$ git hook list --show-scope test-hook
local event-disabled hook-1
When a hook is both per-hook disabled and event-disabled, only
"event-disabled" is shown: the event-level switch is the more
relevant piece of information, and the per-hook "disabled" status
will surface once the event is re-enabled.
Using an event name as a friendly-name (e.g. hook.<event>.enabled)
can cause ambiguity, so a fatal error is issued when using a known
event name and a warning is issued for unknown event name, since
a collision cannot be detected with certainty for unknown events.
Suggested-by: Patrick Steinhardt <ps@pks.im>
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move is_known_hook() from builtin/hook.c (static) into hook.c and
export it via hook.h so it can be reused.
Make it return bool and the iterator `h` for clarity (iterate hooks).
Both meson.build and the Makefile are updated to reflect that the
header is now used by libgit, not the builtin sources.
The next commit will use this to reject hook friendly-names that
collide with known event names.
Co-authored-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Issue a warning when the user confuses the hook process and event
namespaces by setting hook.<friendly-name>.jobs.
Detect this by checking whether the name carrying .jobs also has
.command, .event, or .parallel configured. Extract is_friendly_name()
as a helper for this check, to be reused by future per-event config
handling.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a hook.<event>.jobs count config that allows users to override the
global hook.jobs setting for specific hook events.
This allows finer-grained control over parallelism on a per-event basis.
For example, to run `post-receive` hooks with up to 4 parallel jobs
while keeping other events at their global default:
[hook]
post-receive.jobs = 4
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expose the parallel job count as a command-line flag so callers can
request parallelism without relying only on the hook.jobs config.
Add tests covering serial/parallel execution and TTY behaviour under
-j1 vs -jN.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several hooks are known to be inherently non-parallelizable, so initialize
them with RUN_HOOKS_OPT_INIT_FORCE_SERIAL. This pins jobs=1 and overrides
any hook.jobs or runtime -j flags.
These hooks are:
applypatch-msg, pre-commit, prepare-commit-msg, commit-msg, post-commit,
post-checkout, and push-to-checkout.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
pre-push is the only hook that keeps stdout and stderr separate (for
backwards compatibility with git-lfs and potentially other users). This
prevents parallelizing it because run-command needs stdout_to_stderr=1
to buffer and de-interleave parallel outputs.
Since we now default to jobs=1, backwards compatibility is maintained
without needing any extension or extra config: when no parallelism is
requested, pre-push behaves exactly as before.
When the user explicitly opts into parallelism via hook.jobs > 1,
hook.<event>.jobs > 1, or -jN, they accept the changed output behavior.
Document this and let get_hook_jobs() set stdout_to_stderr=1 automatically
when jobs > 1, removing the need for any extension infrastructure.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hooks always run in sequential order due to the hardcoded jobs == 1
passed to run_process_parallel(). Remove that hardcoding to allow
users to run hooks in parallel (opt-in).
Users need to decide which hooks to run in parallel, by specifying
"parallel = true" in the config, because Git cannot know if their
specific hooks are safe to run or not in parallel (for e.g. two hooks
might write to the same file or call the same program).
Some hooks are unsafe to run in parallel by design: these will marked
in the next commit using RUN_HOOKS_OPT_INIT_FORCE_SERIAL.
The hook.jobs config specifies the default number of jobs applied to all
hooks which have parallelism enabled.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The hook.jobs config is a global way to set hook parallelization for
all hooks, in the sense that it is not per-event nor per-hook.
Finer-grained configs will be added in later commits which can override
it, for e.g. via a per-event type job options. Next commits will also
add to this item's documentation.
Parse hook.jobs config key in hook_config_lookup_all() and store its
value in hook_all_config_cb.jobs, then transfer it into r->jobs after
the config pass completes.
This is mostly plumbing and the cached value is not yet used.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Next commits add a 'hook.jobs' config option of type 'unsigned int',
so add a helper to parse it since the API only supports int and ulong.
An alternative is to make 'hook.jobs' an 'int' or parse it as an 'int'
then cast it to unsigned, however it's better to use proper helpers for
the type. Using 'ulong' is another option which already has helpers, but
it's a bit excessive in size for just the jobs number.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is an old pre-existing memory leak in repo_init() due to failing
to call clear_repository_format() in the error case.
It went undetected because a specific bug is required to trigger it:
enable a v1 extension in a repository with format v0. Obviously this
can only happen in a development environment, so it does not trigger
in normal usage, however the memleak is real and needs fixing.
Fix it by also calling clear_repository_format() in the error case.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update Simplified Chinese translation for post-2.53 code review.
Reviewed-by: 依云 <lilydjwg@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Our breaking changes document says that we'll enable Rust by default in
Git 2.54. Adjust the Makefile to switch the option from WITH_RUST to
NO_RUST to enable it by default and update the help text accordingly.
Similarly, for Meson, enable the option by default and do not
automatically disable it if Cargo is missing, since the goal is to help
users find where they are likely to have problems in the future.
Update our CI tests to swap out the single Linux job with Rust to a
single job without, both for Makefile and Meson. Similarly, update the
Windows Makefile job to not use Rust, while the Meson job (which does
not build with ci/lib.sh) will default to having it enabled.
Move the check for Cargo in the Meson build because it is no longer
needed in the main script.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Older versions of Rust on Linux, such as that used in Debian 11 in our
CI, require linking against libdl. Were we linking with Cargo, this
would be included automatically, but since we're not, explicitly set it
in the system-specific config.
This library is part of libc, so linking against it if it happens to be
unnecessary will add no dependencies to the resulting binary. In
addition, it is provided by both glibc and musl, so it should be
portable to almost all Linux systems.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We'll make Rust the default in a future commit, so be sure to install
Cargo (which will also install Rust) to prepare for that case.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We missed the cut-off for Rust by default in 2.53, but we still can
enable it by default for 2.54, so update our breaking changes document
accordingly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The emulation layer we added for writev(3p) tries to be too faithful
to the spec that on systems with SSIZE_MAX set to lower than 64kB to
fit a single sideband packet would fail just like the real system
writev(), which makes our use of writev() for sideband messages
unworkable.
Let's revert them and reboot the effort after the release. The
reverted commits are:
$ git log -Swritev --oneline 8023abc632^..v2.52.0-rc1
89152af176 cmake: use writev(3p) wrapper as needed
26986f4cba sideband: use writev(3p) to send pktlines
1970fcef93 wrapper: introduce writev(3p) wrappers
3b9b2c2a29 compat/posix: introduce writev(3p) wrapper
8023abc632 is the merge of ps/upload-pack-buffer-more-writes topic to
the mainline.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 3b9b2c2a29a1d529ca9884fa0a6529f6e2496abe; let's
not use writev() for now.
|
|
This reverts commit 1970fcef93adcc5a35f6468d00a5a634d5af2b3c; let's
not use writev() for now.
|
|
This reverts commit 26986f4cbaf38d84a82b0b35da211389ce49552c; let's
not use writev() for now.
|
|
This reverts commit 89152af176ea94ea8f3249115b6e00827fbbeb70; let's
not use writev() for now.
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rev-list --maximal-only" has been optimized by borrowing the
logic used by "git show-branch --independent", which computes the
same kind of information much more efficiently.
* ds/rev-list-maximal-only-optim:
rev-list: use reduce_heads() for --maximal-only
p6011: add perf test for rev-list --maximal-only
t6600: test --maximal-only and --independent
|
|
"git config list" is the official way to spell "git config -l" and
"git config --list". Use it to update the documentation.
* kh/doc-config-list:
doc: gitcvs-migration: rephrase “man page”
doc: replace git config --list/-l with `list`
|
|
Further work to adjust the codebase for C23 that changes functions
like strchr() that discarded constness when they return a pointer into
a const string to preserve constness.
* jk/c23-const-preserving-fixes-more:
git-compat-util: fix CONST_OUTPARAM typo and indentation
refs/files-backend: drop const to fix strchr() warning
http: drop const to fix strstr() warning
range-diff: drop const to fix strstr() warnings
pkt-line: make packet_reader.line non-const
skip_prefix(): check const match between in and out params
pseudo-merge: fix disk reads from find_pseudo_merge()
find_last_dir_sep(): convert inline function to macro
run-command: explicitly cast away constness when assigning to void
pager: explicitly cast away strchr() constness
transport-helper: drop const to fix strchr() warnings
http: add const to fix strchr() warnings
convert: add const to fix strchr() warnings
|
|
Upstream adds 8 new translatable messages.
* 'master' of https://github.com/git/git: (93 commits)
A bit more post -rc1
...
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Clarify that --prefix is used as given and is not normalized,
and may include leading slashes or parent directory components.
Signed-off-by: Pushkar Singh <pushkarkumarsingh1970@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit ec0becacc9 (run-command: add stdin callback for
parallelization, 2026-01-28), we taught run_processes_parallel() to
ignore SIGPIPE, since we wouldn't want a write() to a broken pipe of one
of the children to take down the whole process.
But there's a subtle ordering issue. After we ignore SIGPIPE, we call
pp_init(), which installs its own cleanup handler for multiple signals
using sigchain_push_common(), which includes SIGPIPE. So if we receive
SIGPIPE while writing to a child, we'll trigger that handler first, pop
it off the stack, and then re-raise (which is then ignored because of
the SIG_IGN we pushed first).
But what does that handler do? It tries to clean up all of the child
processes, under the assumption that when we re-raise the signal we'll
be exiting the process!
So a hook that exits without reading all of its input will cause us to
get SIGPIPE, which will put us in a signal handler that then tries to
kill() that same child.
This seems to be mostly harmless on Linux. The process has already
exited by this point, and though kill() does not complain (since the
process has not been reaped with a wait() call), it does not affect the
exit status of the process.
However, this seems not to be true on all platforms. This case is
triggered by t5401.13, "pre-receive hook that forgets to read its
input". This test fails on NonStop since that hook was converted to the
run_processes_parallel() API.
We can fix it by reordering the code a bit. We should run pp_init()
first, and then push our SIG_IGN onto the stack afterwards, so that it
is truly ignored while feeding the sub-processes.
Note that we also reorder the popping at the end of the function, too.
This is not technically necessary, as we are doing two pops either way,
but now the pops will correctly match their pushes.
This also fixes a related case that we can't test yet. If we did have
more than one process to run, then one child causing SIGPIPE would cause
us to kill() all of the children (which might still actually be
running). But the hook API is the only user of the new feed_pipe
feature, and it does not yet support parallel hook execution. So for now
we'll always execute the processes sequentially. Once parallel hook
execution exists, we'll be able to add a test which covers this.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During Git 2.52 timeframe, we broke streaming computation of object
hash outside a repository, which has been corrected.
* jt/index-fd-wo-repo-regression-fix:
|
|
During Git 2.52 timeframe, we broke streaming computation of object
hash outside a repository, which has been corrected.
* jt/index-fd-wo-repo-regression-fix-maint:
object-file: avoid ODB transaction when not writing objects
|
|
The experimental `git replay` command learned the `--ref=<ref>` option
to allow specifying which ref to update, overriding the default behavior.
* tc/replay-ref:
replay: allow to specify a ref with option --ref
replay: use stuck form in documentation and help message
builtin/replay: mark options as not negatable
|
|
add_files_to_cache() used diff_files() to detect only the paths that
are different between the index and the working tree and add them,
which does not need rename detection, which interfered with unnecessary
conflicts.
* ng/add-files-to-cache-wo-rename:
read-cache: disable renames in add_files_to_cache
|
|
Update reftable library part with what is used in libgit2 to improve
portability to different target codebases and platforms.
* ps/reftable-portability:
reftable/system: add abstraction to mmap files
reftable/system: add abstraction to retrieve time in milliseconds
reftable/fsck: use REFTABLE_UNUSED instead of UNUSED
reftable/stack: provide fsync(3p) via system header
reftable: introduce "reftable-system.h" header
|
|
Code cleanup.
* jd/cache-tree-trace-wo-the-repository:
cache-tree: use index state repository in trace2 calls
|
|
Various code clean-up around odb subsystem.
* ps/odb-cleanup:
odb: drop unneeded headers and forward decls
odb: rename `odb_has_object()` flags
odb: use enum for `odb_write_object` flags
odb: rename `odb_write_object()` flags
treewide: use enum for `odb_for_each_object()` flags
CodingGuidelines: document our style for flags
|
|
Test clean-up.
* ss/t7004-unhide-git-failures:
t7004: replace wc -l with modern test helpers
|
|
Add the missing &&'s so we properly propagate failures
between commands in the hook helper functions.
Also add a missing mkdir -p arg (found by adding the &&).
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
reftable_be_init() and reftable_be_create_on_disk() use the_repository even
though a repository instance is already available, either directly or via
struct ref_store.
Replace these uses with the appropriate local repository instance (repo or
ref_store->repo) to avoid relying on global state.
Note that USE_THE_REPOSITORY_VARIABLE cannot be removed yet, as
is_bare_repository() is still there in the file.
Signed-off-by: Shreyansh Paliwal <shreyanshpaliwalcmsmn@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
