| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The breaks in the &&-chain in this test went unnoticed because the
"magic exit code 117" &&-chain checker built into test-lib.sh only
recognizes broken &&-chains at the top-level; it does not work within
`{...}` groups, `(...)` subshells, `$(...)` substitutions, or within
bodies of compound statements, such as `if`, `for`, `while`, `case`,
etc. Furthermore, `chainlint.sed` detects broken &&-chains only in
`(...)` subshells. Thus, the &&-chain breaks in this test fall into the
blind spots of the &&-chain linters.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The entry point to the patience-diff algorithm takes two mmfile_t
structs with the original file contents, but it doesn't actually do
anything useful with them. This is similar to the case recently cleaned
up in the histogram code via f1d019071e (xdiff: drop unused mmfile
parameters from xdl_do_histogram_diff(), 2022-08-19), but there's a bit
more subtlety going on.
We pass them into the recursive patience_diff(), which in turn passes
them into fill_hashmap(), which stuffs the pointers into a struct. But
the only thing which reads the struct fields is our recursion into
patience_diff()!
So it's unlikely that something like -Wunused-parameter could find this
case: it would have to detect the circular dependency caused by the
recursion (not to mention tracing across struct field assignments).
But once found, it's easy to have the compiler confirm what's going on:
1. Drop the "file1" and "file2" fields from the hashmap struct
definition. Remove the assignments in fill_hashmap(), and
temporarily substitute NULL in the recursive call to
patience_diff(). Compiling shows that no other code touched those
fields.
2. Now fill_hashmap() will trigger -Wunused-parameter. Drop "file1"
and "file2" from its definition and callsite.
3. Now patience_diff() will trigger -Wunused-parameter. Drop them
there, too. One of the callsites is the recursion with our
NULL values, so those temporary values go away.
4. Now xdl_do_patience_diff() will trigger -Wunused-parameter. Drop
them there. And we're done.
Suggested-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the spirit of 517fe807d6 (assert NOARG/NONEG behavior of
parse-options callbacks, 2018-11-05), this asserts that our callbacks
were invoked using the right flags (since otherwise they'd segfault on
the NULL arg). Both cases are already correct here, so this is mostly
about annotating the functions, and appeasing -Wunused-parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The reader code passes around a "struct reftable_reader" context
variable. But the seek function doesn't need it; the table iterator we
already get is sufficient.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function has never used its repository or cache_tree parameters
since it was introduced in 9ad2d5ea71 (sparse-index: loose integration
with cache_tree_verify(), 2021-03-30).
As that commit notes, it may eventually be extended further, and that
might require looking at more data. But we can easily add them back if
necessary (and the repository is even included in the index_state these
days already). In the mean time, dropping them makes the code shorter
and appeases -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the 'p0006' test "read-tree br_base br_ballast", move the '-n' flag used
in 'git read-tree' ahead of its positional arguments.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix multi-threaded 'p0004' test's use of the 'REPO_BIG_ENOUGH_FOR_MULTI'
prerequisite. Unlike normal 't/' tests, 't/perf/' tests need to have their
prerequisites declared with the '--prereq' flag.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When action_name is used to denote a command `git %s` do not translate
since command names are never translated.
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`error_resolve_conflict()` checks the untranslated action_name
parameter, so pass it as is.
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Traditionally, reflog messages were never translated, in particular not
on storage.
Due to the switch of more parts of git to the sequencer, old changes in
the sequencer code may lead to recent changes in git's behaviour. E.g.:
c28cbc5ea6 ("sequencer: mark action_name() for translation", 2016-10-21)
marked several uses of `action_name()` for translation. Recently, this
lead to a partially translated reflog:
`rebase: fast-forward` is translated (e.g. in de to `Rebase: Vorspulen`)
whereas other reflog entries such as `rebase (pick):` remain
untranslated as they should be.
Change the relevant line in the sequencer so that this reflog entry
remains untranslated, as well.
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This field has not been used since the function was introduced in
b559263216 (exclude: split pathname matching code into a separate
function, 2012-10-15), though there was a brief period where it was
erroneously used and then reverted in ed4958477b (dir: fix pattern
matching on dirs, 2021-09-24) and 5ceb663e92 (dir: fix
directory-matching bug, 2021-11-02).
It's possible we'd eventually add a flag that makes it useful here, but
there are only a handful of callers. It would be easy to add back if
necessary, and in the meantime this makes the function interface less
misleading.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function has never used its "commit" parameter since it was added
in db757e8b8d (show, log: provide a --remerge-diff capability,
2022-02-02).
This makes sense; we already have separate parameters for the parents
(which lets us redo the merge) and the oid of the result tree (which we
can then diff against the remerge result).
Let's drop the unused parameter in the name of clarity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are no longer used since 9df0fc3d57 (xdiff: fix a memory leak,
2022-02-16), as the caller is expected to call xdl_prepare_env() itself.
After that change the histogram code only examines the prepared
xdfenv_t, not the original buffers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the non-Windows version of this function, we never have any errors to
report, and thus the "report" parameter is unused. But we can't drop it,
because we have to maintain function call compatibility with the version
in compat/mingw.h, which does use this parameter.
Note that there's an extra level of indirection here; the common
function is actually is_path_owned_by_current_user, which is a macro
pointing to "by_current_uid" or "by_current_sid", depending on the
platform. So an alternative here is to eat the unused parameter in the
macro, since -Wunused-parameter doesn't complain about macros. But I
think the UNUSED() annotation is less obfuscated for somebody reading
the code later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The start_async(), etc, functions need a "proc" callback that conforms
to a particular interface. Not every callback needs every parameter
(e.g., the caller might not even ask to open an input descriptor, in
which case there is no point in the callback looking at it). Let's mark
these for -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We pass a callback to read_tree_recursive(), but not every callback
needs every parameter. Let's mark the unused ones to satisfy
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Hashmap comparison functions must conform to a particular callback
interface, but many don't use all of their parameters. Especially the
void cmp_data pointer, but some do not use keydata either (because they
can easily form a full struct to pass when doing lookups). Let's mark
these to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The callback passed to git_config() must conform to a particular
interface. But most callbacks don't actually look at the extra "void
*data" parameter. Let's mark the unused parameters to make
-Wunused-parameter happy.
Note there's one unusual case here in get_remote_default() where we
actually ignore the "value" parameter. That's because it's only checking
whether the option is found at all, and not parsing its value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Streaming "open" functions need to conform to the same virtual function
interface, but not every implementation needs every parameter. Mark the
unused ones as such to appease -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_refs_from_bundle() is a virtual function which must match the
signature of other transports, but it doesn't look at its
transport_options at all. This isn't a bug, because not all transports
necessarily support all options. Let's mark it as unused to appease
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The refs code uses various polymorphic types (e.g., loose vs packed
ref_stores, abstracted iterators). Not every virtual function or
callback needs all of its parameters. Let's mark the unused ones to
quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Functions used with for_each_reflog_ent() need to conform to a
particular interface, but not every function needs all of the
parameters. Mark the unused ones to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Functions used with for_each_ref(), etc, need to conform to the
each_ref_fn interface. But most of them don't need every parameter;
let's annotate the unused ones to quiet -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for compiling with -Wunused-parameter, we'd like to be
able to annotate some function parameters as false positives (e.g.,
parameters which must exist to conform to a callback interface).
Ideally our annotation will:
- be portable, turning into nothing on platforms which don't support
it
- be easy to read, without looking too syntactically odd or taking
attention away from the rest of the parameters
- help us notice when a parameter marked as unused is actually used,
which keeps our annotations accurate. In theory a compiler could
tell us this easily, but gcc has no such warning. Clang has
-Wused-but-marked-unused, but it triggers false positives with our
MAYBE_UNUSED annotation (e.g., for commit-slab functions)
This patch introduces an UNUSED() macro which takes the parameter name
as an argument. That lets us tweak the name in such a way that we'll
notice if somebody tries to use it. It looks like this in use:
int some_ref_cb(const char *refname,
const struct object_id *UNUSED(oid),
int UNUSED(flags),
void *UNUSED(data))
{
printf("got refname %s", refname);
return 0;
}
Because the unused parameter names are rewritten behind the scenes to
UNUSED_oid, etc, adding code like:
printf("oid is %s", oid_to_hex(oid));
will fail compilation with "oid undeclared". Sadly, the "did you mean"
feature of modern compilers is not generally smart enough to suggest the
"unused" name. If we used a very short prefix like U_oid, that does
convince gcc to say "did you mean", but since the "U_" in the suggestion
isn't much of a hint, it doesn't really help. In practice, a look at the
function definition usually makes the problem pretty obvious.
Note that we have to put the definition of UNUSED early in
git-compat-util.h, because it will eventually be used for some compat
functions themselves (both directly here and in mingw.h).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git worktree' parses its subcommands with a long list of if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling missing or unknown subcommands, and listing subcommands for
Bash completion.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git stash' parses its subcommands with a long list of if-else if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
and listing subcommands for Bash completion.
Note that the push_stash() function implementing the 'push' subcommand
accepts an extra flag parameter to indicate whether push was assumed,
so add a wrapper function with the standard subcommand function
signature.
Note also that this change "hides" the '-h' option in 'git stash push
-h' from the parse_option() call in cmd_stash(), as it comes after the
subcommand. Consequently, from now on it will emit the usage of the
'push' subcommand instead of the usage of 'git stash'. We had a
failing test for this case, which can now be flipped to expect
success.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git sparse-checkout' parses its subcommands with a couple of if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling missing or unknown subcommands, and listing subcommands for
Bash completion.
Note that some of the functions implementing each subcommand only
accept the 'argc' and '**argv' parameters, so add a (unused) '*prefix'
parameter to make them match the type expected by parse-options, and
thus avoid casting function pointers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git remote' parses its subcommands with a long list of if-else if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling unknown subcommands, and listing subcommands for Bash
completion. Make sure that the default operation mode doesn't accept
any arguments; and while at it remove the capitalization of the error
message and adjust the test checking it accordingly.
Note that 'git remote' has both 'remove' and 'rm' subcommands, and the
former is preferred [1], so hide the latter for completion.
Note also that the functions implementing each subcommand only accept
the 'argc' and '**argv' parameters, so add a (unused) '*prefix'
parameter to make them match the type expected by parse-options, and
thus avoid casting a bunch of function pointers.
[1] e17dba8fe1 (remote: prefer subcommand name 'remove' to 'rm',
2012-09-06)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git reflog' parses its subcommands with a couple of if-else if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
and listing subcommands for Bash completion.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git notes' parses its subcommands with a long list of if-else if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling unknown subcommands, and listing subcommands for Bash
completion. Make sure that the default operation mode doesn't accept
any arguments.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git multi-pack-index' parses its subcommands with a couple of if-else
if statements. parse-options has just learned to parse subcommands,
so let's use that facility instead, with the benefits of shorter code,
handling missing or unknown subcommands, and listing subcommands for
Bash completion.
Note that the functions implementing each subcommand only accept the
'argc' and '**argv' parameters, so add a (unused) '*prefix' parameter
to make them match the type expected by parse-options, and thus avoid
casting function pointers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git hook' parses its currently only subcommand with an if statement.
parse-options has just learned to parse subcommands, so let's use that
facility instead, with the benefits of shorter code, handling missing
or unknown subcommands, and listing subcommands for Bash completion.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git maintenanze' parses its subcommands with a couple of if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling missing or unknown subcommands, and listing subcommands for
Bash completion.
This change makes 'git maintenance' consistent with other commands in
that the help text shown for '-h' goes to standard output, not error,
in the exit code and error message on unknown subcommand, and the
error message on missing subcommand. There is a test checking these,
which is now updated accordingly.
Note that some of the functions implementing each subcommand don't
accept any parameters, so add the (unused) 'argc', '**argv' and
'*prefix' parameters to make them match the type expected by
parse-options, and thus avoid casting function pointers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git commit-graph' parses its subcommands with an if-else if
statement. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling missing or unknown subcommands, and listing subcommands for
Bash completion.
Note that the functions implementing each subcommand only accept the
'argc' and '**argv' parameters, so add a (unused) '*prefix' parameter
to make them match the type expected by parse-options, and thus avoid
casting function pointers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git bundle' parses its subcommands with a couple of if-else if
statements. parse-options has just learned to parse subcommands, so
let's use that facility instead, with the benefits of shorter code,
handling missing or unknown subcommands, and listing subcommands for
Bash completion.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several Git commands have subcommands to implement mutually exclusive
"operation modes", and they usually parse their subcommand argument
with a bunch of if-else if statements.
Teach parse-options to handle subcommands as well, which will result
in shorter and simpler code with consistent error handling and error
messages on unknown or missing subcommand, and it will also make
possible for our Bash completion script to handle subcommands
programmatically.
The approach is guided by the following observations:
- Most subcommands [1] are implemented in dedicated functions, and
most of those functions [2] either have a signature matching the
'int cmd_foo(int argc, const char **argc, const char *prefix)'
signature of builtin commands or can be trivially converted to
that signature, because they miss only that last prefix parameter
or have no parameters at all.
- Subcommand arguments only have long form, and they have no double
dash prefix, no negated form, and no description, and they don't
take any arguments, and can't be abbreviated.
- There must be exactly one subcommand among the arguments, or zero
if the command has a default operation mode.
- All arguments following the subcommand are considered to be
arguments of the subcommand, and, conversely, arguments meant for
the subcommand may not preceed the subcommand.
So in the end subcommand declaration and parsing would look something
like this:
parse_opt_subcommand_fn *fn = NULL;
struct option builtin_commit_graph_options[] = {
OPT_STRING(0, "object-dir", &opts.obj_dir, N_("dir"),
N_("the object directory to store the graph")),
OPT_SUBCOMMAND("verify", &fn, graph_verify),
OPT_SUBCOMMAND("write", &fn, graph_write),
OPT_END(),
};
argc = parse_options(argc, argv, prefix, options,
builtin_commit_graph_usage, 0);
return fn(argc, argv, prefix);
Here each OPT_SUBCOMMAND specifies the name of the subcommand and the
function implementing it, and the address of the same 'fn' subcommand
function pointer. parse_options() then processes the arguments until
it finds the first argument matching one of the subcommands, sets 'fn'
to the function associated with that subcommand, and returns, leaving
the rest of the arguments unprocessed. If none of the listed
subcommands is found among the arguments, parse_options() will show
usage and abort.
If a command has a default operation mode, 'fn' should be initialized
to the function implementing that mode, and parse_options() should be
invoked with the PARSE_OPT_SUBCOMMAND_OPTIONAL flag. In this case
parse_options() won't error out when not finding any subcommands, but
will return leaving 'fn' unchanged. Note that if that default
operation mode has any --options, then the PARSE_OPT_KEEP_UNKNOWN_OPT
flag is necessary as well (otherwise parse_options() would error out
upon seeing the unknown option meant to the default operation mode).
Some thoughts about the implementation:
- The same pointer to 'fn' must be specified as 'value' for each
OPT_SUBCOMMAND, because there can be only one set of mutually
exclusive subcommands; parse_options() will BUG() otherwise.
There are other ways to tell parse_options() where to put the
function associated with the subcommand given on the command line,
but I didn't like them:
- Change parse_options()'s signature by adding a pointer to
subcommand function to be set to the function associated with
the given subcommand, affecting all callsites, even those that
don't have subcommands.
- Introduce a specific parse_options_and_subcommand() variant
with that extra funcion parameter.
- I decided against automatically calling the subcommand function
from within parse_options(), because:
- There are commands that have to perform additional actions
after option parsing but before calling the function
implementing the specified subcommand.
- The return code of the subcommand is usually the return code
of the git command, but preserving the return code of the
automatically called subcommand function would have made the
API awkward.
- Also add a OPT_SUBCOMMAND_F() variant to allow specifying an
option flag: we have two subcommands that are purposefully
excluded from completion ('git remote rm' and 'git stash save'),
so they'll have to be specified with the PARSE_OPT_NOCOMPLETE
flag.
- Some of the 'parse_opt_flags' don't make sense with subcommands,
and using them is probably just an oversight or misunderstanding.
Therefore parse_options() will BUG() when invoked with any of the
following flags while the options array contains at least one
OPT_SUBCOMMAND:
- PARSE_OPT_KEEP_DASHDASH: parse_options() stops parsing
arguments when encountering a "--" argument, so it doesn't
make sense to expect and keep one before a subcommand, because
it would prevent the parsing of the subcommand.
However, this flag is allowed in combination with the
PARSE_OPT_SUBCOMMAND_OPTIONAL flag, because the double dash
might be meaningful for the command's default operation mode,
e.g. to disambiguate refs and pathspecs.
- PARSE_OPT_STOP_AT_NON_OPTION: As its name suggests, this flag
tells parse_options() to stop as soon as it encouners a
non-option argument, but subcommands are by definition not
options... so how could they be parsed, then?!
- PARSE_OPT_KEEP_UNKNOWN: This flag can be used to collect any
unknown --options and then pass them to a different command or
subsystem. Surely if a command has subcommands, then this
functionality should rather be delegated to one of those
subcommands, and not performed by the command itself.
However, this flag is allowed in combination with the
PARSE_OPT_SUBCOMMAND_OPTIONAL flag, making possible to pass
--options to the default operation mode.
- If the command with subcommands has a default operation mode, then
all arguments to the command must preceed the arguments of the
subcommand.
AFAICT we don't have any commands where this makes a difference,
because in those commands either only the command accepts any
arguments ('notes' and 'remote'), or only the default subcommand
('reflog' and 'stash'), but never both.
- The 'argv' array passed to subcommand functions currently starts
with the name of the subcommand. Keep this behavior. AFAICT no
subcommand functions depend on the actual content of 'argv[0]',
but the parse_options() call handling their options expects that
the options start at argv[1].
- To support handling subcommands programmatically in our Bash
completion script, 'git cmd --git-completion-helper' will now list
both subcommands and regular --options, if any. This means that
the completion script will have to separate subcommands (i.e.
words without a double dash prefix) from --options on its own, but
that's rather easy to do, and it's not much work either, because
the number of subcommands a command might have is rather low, and
those commands accept only a single --option or none at all. An
alternative would be to introduce a separate option that lists
only subcommands, but then the completion script would need not
one but two git invocations and command substitutions for commands
with subcommands.
Note that this change doesn't affect the behavior of our Bash
completion script, because when completing the --option of a
command with subcommands, e.g. for 'git notes --<TAB>', then all
subcommands will be filtered out anyway, as none of them will
match the word to be completed starting with that double dash
prefix.
[1] Except 'git rerere', because many of its subcommands are
implemented in the bodies of the if-else if statements parsing the
command's subcommand argument.
[2] Except 'credential', 'credential-store' and 'fsmonitor--daemon',
because some of the functions implementing their subcommands take
special parameters.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The output of 'git <cmd> --git-completion-helper' always starts with a
space, e.g.:
$ git config --git-completion-helper
--global --system --local [...]
This doesn't matter for the completion script, because field splitting
discards that space anyway.
However, later patches in this series will teach parse-options to
handle subcommands, and subcommands will be included in the completion
helper output as well. This will make the loop printing options (and
subcommands) a tad more complex, so I wanted to test the result. The
test would have to account for the presence of that leading space,
which bugged my OCD, so let's get rid of it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the comment documenting 'struct option' to clarify that
PARSE_OPT_NODASH can only be an argumentless short option; see
51a9949eda (parseopt: add PARSE_OPT_NODASH, 2009-05-07).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description of 'PARSE_OPT_KEEP_UNKNOWN' starts with "Keep unknown
arguments instead of erroring out". This is a bit misleading, as this
flag only applies to unknown --options, while non-option arguments are
kept even without this flag.
Update the description to clarify this, and rename the flag to
PARSE_OPTIONS_KEEP_UNKNOWN_OPT to make this obvious just by looking at
the flag name.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description of the 'OPT_CMDMODE' macro states that "enum_val is
set to int_var when ...", but it's the other way around, 'int_var' is
set to 'enum_val'. Fix this.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 't0040-parse-options.sh' we thoroughly test the parsing of all
types and forms of options, but in all those tests parse_options() is
always invoked with a 0 flags parameter.
Add a few tests to demonstrate how various 'enum parse_opt_flags'
values are supposed to influence option parsing.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git remote' without a subcommand defaults to listing all remotes and
doesn't accept any arguments except the '-v|--verbose' option.
We are about to teach parse-options to handle subcommands, and update
'git remote' to make use of that new feature. So let's add some tests
to make sure that the upcoming changes don't inadvertently change the
behavior in these cases.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git notes' without a subcommand defaults to listing all notes and
doesn't accept any arguments.
We are about to teach parse-options to handle subcommands, and update
'git notes' to make use of that new feature. So let's add a test to
make sure that the upcoming changes don't inadvertenly change the
behavior in this corner case.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our Bash completion script can complete --options for commands using
parse-options even when that command doesn't have a dedicated
completion function, but to do so the completion script must know
which commands use parse-options and which don't. Therefore, commands
not using parse-options are marked in 'git.c's command list with the
NO_PARSEOPT flag.
Update this list, and remove this flag from the commands that by now
use parse-options.
After this change we can TAB complete --options of the plumbing
commands 'commit-tree', 'mailinfo' and 'mktag'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If GIT_PS1_SHOWCONFLICTSTATE is set to "yes", show the word "CONFLICT"
on the command prompt when there are unresolved conflicts.
Example prompt: (main|CONFLICT)
Signed-off-by: Justin Donnelly <justinrdonnelly@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have long allowed users to run e.g.
git log --ancestry-path master..seen
which shows all commits which satisfy all three of these criteria:
* are an ancestor of seen
* are not an ancestor of master
* have master as an ancestor
This commit allows another variant:
git log --ancestry-path=$TOPIC master..seen
which shows all commits which satisfy all of these criteria:
* are an ancestor of seen
* are not an ancestor of master
* have $TOPIC in their ancestry-path
that last bullet can be defined as commits meeting any of these
criteria:
* are an ancestor of $TOPIC
* have $TOPIC as an ancestor
* are $TOPIC
This also allows multiple --ancestry-path arguments, which can be
used to find commits with any of the given topics in their ancestry
path.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests in t6019 are repetitive, so create a helper that greatly
simplifies the test script.
In addition, update the common pattern that places 'git rev-list' on the
left side of a pipe, which can hide some exit codes. Send the output to
a 'raw' file that is then consumed by other tools so the Git exit code
is verified as zero. And since we're using --format anyway, switch to
`git log`, so that we get the desired format and can avoid using sed.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 66b209b86a ("merge-ort: implement CE_SKIP_WORKTREE handling with
conflicted entries", 2021-03-20) added some code for merge-ort to handle
conflicted and skip_worktree entries in general. Included in this was
an ugly hack for dealing with present-despite-skipped entries and a
testcase (t6428.2) specific to that hack, since at that time users could
accidentally get files into that state when using a sparse checkout.
However, with the merging of 82386b4496 ("Merge branch
'en/present-despite-skipped'", 2022-03-09), that class of problems was
addressed globally and in a much cleaner way. As such, the
present-despite-skipped hack in merge-ort is no longer needed and can
simply be removed.
No additional testcase is needed here; t6428.2 was written to test the
necessary functionality and is being kept. The fact that this test
continues to pass despite the code being removed shows that the extra
code is no longer necessary.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the Scalar roadmap to reflect completion of enabling the built-in
FSMonitor in Scalar.
Note that implementation of 'scalar help' was moved to the final set of
changes to move Scalar out of 'contrib/'. This is due to a dependency on
changes to 'git help', as all changes to the main Git tree *exclusively*
implemented to support Scalar are part of that series.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
