| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When "git submodule update" runs it might call "checkout", "merge",
"rebase", or a custom command. Ever since run_update_command() was
added in c51f8f94e5b (submodule--helper: run update procedures from C,
2021-08-24) we'd either exit immediately if the
"submodule.<name>.update" method failed, or in the case of "checkout"
continue trying to update other submodules.
This code used to use the magical "2" return code, but in
55b3f12cb54 (submodule update: use die_message(), 2022-03-15) it was
made to exit(128), which in preceding commits has been changed to
return that 128 code to the top-level.
Let's "libify" this code even more by not having it arbitrarily
override the return code. In practice this doesn't change anything as
the code "git checkout" would return on any normal failure is "1", but
we'll now in principle properly abort the operation if "git checkout"
were to exit with 128.
It would make sense to follow-up this change with a change to allow
the "submodule.<name>.update = !..." (SM_UPDATE_COMMAND) method the
same liberties as "checkout", and perhaps to do the same with a failed
"merge" or "rebase". But let's leave that for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preceding commits the codepaths around update_submodules() were
changed from using exit() or die() to ferrying up a
"must_die_on_failure" in the cases where we'd exit(), and in most
cases where we'd die().
We needed to do this this to ensure that we'd early exit or otherwise
abort the update_submodules() processing before it was completed.
Now that those preceding changes have shown that we've converted those
paths, we can remove the remaining "ret == 128" special-cases, leaving
the only such special-case in update_submodules(). I.e. we now know
after having gone through the various codepaths that we were only
returning 128 if we meant to early abort.
In update_submodules() we'll for now set any non-zero non-128 exit
codes to "1", but will start ferrying up the exit code as-is in a
subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Libify the determine_submodule_update_strategy() by having it invoke
die_message() rather than die(), and returning the code die_message()
returns on failure.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code downstream of module_update() to short-circuit and return
to the top-level on failure, rather than calling exit().
To do so we need to diligently check whether we "must_die_on_failure",
which is a pattern started in c51f8f94e5b (submodule--helper: run
update procedures from C, 2021-08-24), but which hadn't been completed
to the point where we could avoid calling exit() here.
This introduces no functional changes, but makes it easier to both
call these routines as a library in the future, and to eventually
avoid leaking memory.
This and similar control flow in submodule--helper.c could be made
simpler by properly "libifying" it, i.e. to have it consistently
return -1 on failures, and to early return on any non-success.
But let's leave that larger project for now, and (mostly) emulate what
were doing with the "exit(128)" before this change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply some DRY principles in run_update_command() and don't have two
"switch" statements over "ud->update_strategy.type" determine the same
thing.
First we were setting "must_die_on_failure = 1" in all cases except
"SM_UPDATE_CHECKOUT" (and we'd BUG(...) out on the rest). This code
was added in c51f8f94e5b (submodule--helper: run update procedures
from C, 2021-08-24).
Then we'd duplicate same "switch" logic when we were using the
"must_die_on_failure" variable.
Let's instead have the "case" branches in that inner "switch"
determine whether or not the "update must continue" by picking an exit
code.
This also mostly avoids hardcoding the "128" exit code, instead we can
make use of the return value of the die_message() function, which
we've been calling here since 55b3f12cb54 (submodule update: use
die_message(), 2022-03-15). We're still hardcoding it to determine if
we "exit()", but subsequent commit(s) will address that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the submodule_strategy_to_string() function added in
3604242f080 (submodule: port init from shell to C, 2016-04-15) to
really return a "const char *". In the "SM_UPDATE_COMMAND" case it
would return a strbuf_detach().
Furthermore, this function would return NULL on SM_UPDATE_UNSPECIFIED,
so it wasn't safe to xstrdup() its return value in the general case,
or to use it in a sprintf() format as the code removed in the
preceding commit did.
But its callers would never call it with either SM_UPDATE_UNSPECIFIED
or SM_UPDATE_COMMAND. Let's have its behavior reflect how its only
user expects it to behave, and BUG() out on the rest.
By doing this we can also stop needlessly xstrdup()-ing and free()-ing
the memory for the config we're setting. We can instead always use
constant strings. We can also use the *_tmp() variant of
git_config_get_string().
Let's also rename this submodule_strategy_to_string() function to
submodule_update_type_to_string(). Now that it's only tasked with
returning a string version of the "enum submodule_update_type type".
Before it would look at the "command" field in "struct
submodule_update_strategy".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Don't call submodule_strategy_to_string() in a BUG() message. These
calls added in c51f8f94e5b (submodule--helper: run update procedures
from C, 2021-08-24) don't need the extra information
submodule_strategy_to_string() gives us, as we'll never reach the
SM_UPDATE_COMMAND case here.
That case is the only one where we'd get any information beyond the
straightforward number-to-string mapping.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add missing braces to an "else" arm in init_submodule(), this
stylistic change makes this code conform to the CodingGuidelines, and
makes a subsequent commit smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Amend the update_submodule() function to return the failing "ret" on
error, instead of overriding it with "1".
This code was added in b3c5f5cb048 (submodule: move core cmd_update()
logic to C, 2022-03-15), and this change ends up not making a
difference as this function is only called in update_submodules(). If
we return non-zero here we'll always in turn return "1" in
module_update().
But if we didn't do that and returned any other non-zero exit code in
update_submodules() we'd fail the test that's being amended
here. We're still testing the status quo here.
This change makes subsequent refactoring of update_submodule() easier,
as we'll no longer need to worry about clobbering the "ret" we get
from the run_command().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the "res" variable added in b3c5f5cb048 (submodule: move core
cmd_update() logic to C, 2022-03-15) to "ret", which is the convention
in the rest of this file.
Eventual follow-up commits will change the code in update_submodule()
to a "goto cleanup" pattern, let's have the post image look consistent
with the rest. For update_submodules() let's also use a "ret" for
consistency, that use was also added in b3c5f5cb048. We'll be
modifying that codepath in subsequent commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "res" variable must be true at this point in update_submodule(),
as just a few lines above this we've unconditionally:
if (!res)
return 0;
So we don't need to guard the "return 1" with an "else if (res)", we
can return unconditionally at this point. See b3c5f5cb048 (submodule:
move core cmd_update() logic to C, 2022-03-15) for the initial
introduction of this code, this check of "res" has always been
redundant.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor code added in e83e3333b57 (submodule: port submodule
subcommand 'summary' from shell to C, 2020-08-13) so that "errmsg" and
"errmsg_str" are folded into one. The distinction between the empty
string and NULL is something that's tested for by
e.g. "t/t7401-submodule-summary.sh".
This is in preparation for fixing a memory leak the "struct strbuf" in
the pre-image.
Let's also pass a "const char *" to print_submodule_summary(), as it
should not be modifying the "errmsg".
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a "const" to the "struct update_data" passed to
run_update_procedure(), which it in turn passes along (peeled) to
is_tip_reachable() and fetch_in_submodule()).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a "const" to the copy of "struct update_data" that's tracked by
the "struct submodule_update_clone", as it neither owns nor modifies
it.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add "const" to the "struct module_clone_data" that we pass to
clone_submodule(), which makes the ownership clear, and stops us from
clobbering the "clone_data->path".
We still need to add to the "reference" member, which is a "struct
string_list". Let's do this by having clone_submodule() create its
own, and copy the contents over, allowing us to pass it as a
separate parameter.
This new "struct string_list" still leaks memory, just as the "struct
module_clone_data" did before. let's not fix that for now, to fix that
we'll need to add some "goto cleanup" to the relevant code. That will
eventually be done in follow-up commits, this change makes it easier
to fix the memory leak.
The scope of the new "reference" variable in add_submodule() could be
narrowed to the "else" block, but as we'll eventually free it with a
"goto cleanup" let's declare it at the start of the function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the only remaining use of a "struct strbuf sb" in
clone_submodule() to live in its own scope. This makes the code
clearer by limiting its lifetime.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use xstrfmt() in clone_submodule() instead of a "struct strbuf" in two
cases where we weren't getting anything out of using the "struct
strbuf".
This changes code that was was added along with other uses of "struct
strbuf" in this function in ee8838d1577 (submodule: rewrite
`module_clone` shell function in C, 2015-09-08).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the less verbose { 0 }-initialization syntax rather than memset()
in builtin/submodule--helper.c, this doesn't make a difference in
terms of behavior, but as we're about to modify adjacent code makes
this more consistent, and lets us avoid worrying about when the
memset() happens v.s. a "goto cleanup".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the preceding commit fixed style issues with \n\n among the
declared variables let's fix the minor stylistic issues with those
variables not being consistently followed by a \n\n.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The usual style in the codebase is to separate declared variables with
a single newline, not two, let's adjust this code to conform to
that. This makes the eventual addition of various "int ret" variables
more consistent.
In doing this the comment added in 2964d6e5e1e (submodule: port
subcommand 'set-branch' from shell to C, 2020-06-02) might become
ambiguous to some, although it should be clear what it's referring to,
let's move it above the 'OPT_NOOP_NOARG('q', "quiet")' to make that
clearer.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As its name suggests the "resolve-relative-url-test" has never been
used outside of the test suite, see 63e95beb085 (submodule: port
resolve_relative_url from shell to C, 2016-04-15) for its original
addition.
Perhaps it would make sense to drop this code entirely, as we feel
that we've got enough indirect test coverage, but let's leave that
question to a possible follow-up change. For now let's keep the test
coverage this gives us.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the "check-name" helper to a test-tool, since
a6226fd772b (submodule--helper: convert the bulk of cmd_add() to C,
2021-08-10) it has only been used by this test, not git-submodule.sh.
As noted with its introduction in 0383bbb9015 (submodule-config:
verify submodule names as paths, 2018-04-30) the intent of
t7450-bad-git-dotfiles.sh has always been to unit test the
check_submodule_name() function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a new "test-tool submodule" and move the "is-active" subcommand
over to it. It was added in 5c2bd8b77ae (submodule--helper: add
is-active subcommand, 2017-03-16), since
a452128a36c (submodule--helper: introduce add-config subcommand,
2021-08-06) it hasn't been used by git-submodule.sh.
Since we're creating a command dispatch similar to test-tool.c itself
let's split out the "struct test_cmd" into a new test-tool-utils.h,
which both this new code and test-tool.c itself can use.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
No test has used this "--url" parameter since the test code that made
use of it was removed in 32bc548329d (submodule-config: remove support
for overlaying repository config, 2017-08-03).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the "submodule--helper list" sub-command, which hasn't been
used by git-submodule.sh since 2964d6e5e1e (submodule: port subcommand
'set-branch' from shell to C, 2020-06-02).
There was a test added in 2b56bb7a87a (submodule helper list: respect
correct path prefix, 2016-02-24) which relied on it, but the right
thing to do here is to delete that test as well.
That test was regression testing the "list" subcommand itself. We're
not getting anything useful from the "list | cut -f2" invocation that
we couldn't get from "foreach 'echo $sm_path'".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "name" helper has not been used since e83e3333b57 (submodule: port
submodule subcommand 'summary' from shell to C, 2020-08-13).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a missing test for ""add <repository> <path>" where "<path>" is an
absolute path. This tests code added in [1] and later turned into an
"else" branch in clone_submodule() in [2] that's never been tested.
This needs to be skipped on WINDOWS because all of $PWD, $(pwd) and
the "$(pwd -P)" we get via "$submodurl" would fail in CI with e.g.:
fatal: could not create directory 'D:/a/git/git/t/trash
directory.t7400-submodule-basic/.git/modules/D:/a/git/git/t/trash
directory.t7400-submodule-basic/add-abs'
I.e. we can't handle these sorts of paths in this context on that
platform.
I'm not sure where we run into the edges of "$PWD" behavior on
Windows (see [1] for a previous loose end on the topic), but for the
purposes of this test it's sufficient that we test this on other
platforms.
1. ee8838d1577 (submodule: rewrite `module_clone` shell function in C,
2015-09-08)
2. f8eaa0ba98b (submodule--helper, module_clone: always operate on
absolute paths, 2016-03-31)
1. https://lore.kernel.org/git/220630.86edz6c75c.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test what exit code and output we emit on "git submodule -h", how we
handle "--" when no subcommand is specified, and how the top-level
"--recursive" option is handled.
For "-h" this doesn't make sense, but let's test for it so that any
subsequent eventual behavior change will become clear.
For "--" this follows up on 68cabbfda36 (submodule: document default
behavior, 2019-02-15) and tests that "status" doesn't support
the "--" delimiter. There's no intrinsically good reason not to
support that. We behave this way due to edge cases in
git-submodule.sh's implementation, but as with "-h" let's assert our
current long-standing behavior for now.
For "--recursive" the exclusion of it from the top-level appears to
have been an omission in 15fc56a8536 (git submodule foreach: Add
--recursive to recurse into nested submodules, 2009-08-19), there
doesn't seem to be a reason not to support it alongside "--quiet" and
"--cached", but let's likewise assert our existing behavior for now.
I.e. as long as "status" is optional it would make sense to support
all of its options when it's omitted, but we only do that with
"--quiet" and "--cached", and curiously omit "--recursive".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code that implements multi-strategy support in "git merge" has
been clean-up a bit.
* en/merge-multi-strategies:
merge: small code readability improvement
merge: cleanup confusing logic for handling successful merges
|
|
More tests to protect the current behaviour of "merge-tree" before
it gets further updated.
* en/t4301-more-merge-tree-tests:
t4301: add more interesting merge-tree testcases
|
|
The auto-stashed local changes created by "git merge --autostash"
was mixed into a conflicted state left in the working tree, which
has been corrected.
* en/merge-unstash-only-on-clean-merge:
merge: only apply autostash when appropriate
|
|
Introduce the "subcommand" mode to parse-options API and update the
command line parser of Git commands with subcommands.
* sg/parse-options-subcommand: (23 commits)
remote: run "remote rm" argv through parse_options()
maintenance: add parse-options boilerplate for subcommands
pass subcommand "prefix" arguments to parse_options()
builtin/worktree.c: let parse-options parse subcommands
builtin/stash.c: let parse-options parse subcommands
builtin/sparse-checkout.c: let parse-options parse subcommands
builtin/remote.c: let parse-options parse subcommands
builtin/reflog.c: let parse-options parse subcommands
builtin/notes.c: let parse-options parse subcommands
builtin/multi-pack-index.c: let parse-options parse subcommands
builtin/hook.c: let parse-options parse subcommands
builtin/gc.c: let parse-options parse 'git maintenance's subcommands
builtin/commit-graph.c: let parse-options parse subcommands
builtin/bundle.c: let parse-options parse subcommands
parse-options: add support for parsing subcommands
parse-options: drop leading space from '--git-completion-helper' output
parse-options: clarify the limitations of PARSE_OPT_NODASH
parse-options: PARSE_OPT_KEEP_UNKNOWN only applies to --options
api-parse-options.txt: fix description of OPT_CMDMODE
t0040-parse-options: test parse_options() with various 'parse_opt_flags'
...
|
|
Implement "git clone --bundle-uri".
* ds/bundle-uri-clone:
clone: warn on failure to repo_init()
clone: --bundle-uri cannot be combined with --depth
bundle-uri: add support for http(s):// and file://
clone: add --bundle-uri option
bundle-uri: create basic file-copy logic
remote-curl: add 'get' capability
|
|
As noted in the preceding commit our "UNUSED" macro was no longer
protecting against actual use of the "unused" variables, which it was
previously doing by renaming the variable.
Let's instead use the "deprecated" attribute to accomplish that
goal. As [1] rightly notes this has the drawback that compiling with
"-Wno-deprecated-declarations" will silence any such uses. I think the
trade-off is worth it as:
* We can consider that a feature, as e.g. backporting certain patches
might use a now "unused" parameter, and the person doing that might
want to silence it with DEVOPTS=no-error.
* This way we play nicely with coccinelle, and any other dumb(er)
parser of C (such as syntax highlighters).
* Not every single compilation of git needs to catch "used but
declared unused" parameters. It's sufficient that the default "make
DEVELOPER=1" will do so, and that the "static-analysis" CI job will
catch it.
1. https://lore.kernel.org/git/YwCtkwjWdJVHHZV0@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As reported in [1] the "UNUSED(var)" macro introduced in
2174b8c75de (Merge branch 'jk/unused-annotation' into next,
2022-08-24) breaks coccinelle's parsing of our sources in files where
it occurs.
Let's instead partially go with the approach suggested in [2] of
making this not take an argument. As noted in [1] "coccinelle" will
ignore such tokens in argument lists that it doesn't know about, and
it's less of a surprise to syntax highlighters.
This undoes the "help us notice when a parameter marked as unused is
actually use" part of 9b240347543 (git-compat-util: add UNUSED macro,
2022-08-19), a subsequent commit will further tweak the macro to
implement a replacement for that functionality.
1. https://lore.kernel.org/git/220825.86ilmg4mil.gmgdl@evledraar.gmail.com/
2. https://lore.kernel.org/git/220819.868rnk54ju.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Retire chainlint.sed since it has been replaced by a more accurate and
functional &&-chain "linter", thus is no longer used.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unlike chainlint.sed which "lints" a single test body at a time, thus is
invoked once per test, chainlint.pl can check all test bodies in all
test scripts with a single invocation. As such, it is akin to other bulk
"linters" run by the Makefile, such as `test-lint-shell-syntax`,
`test-lint-duplicates`, etc.
Therefore, teach `make test` and `make prove` to invoke chainlint.pl
along with the other bulk linters. Also, since the single chainlint.pl
invocation by `make test` or `make prove` has already checked all tests
in all scripts, instruct the individual test scripts not to run
chainlint.pl on themselves unnecessarily.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By automatically invoking chainlint.sed upon each test it runs,
`test_run_` in test-lib.sh ensures that broken &&-chains will be
detected early as tests are modified or new are tests created since it
is typical to run a test script manually (i.e. `./t1234-test-script.sh`)
during test development. Now that the implementation of chainlint.pl is
complete, modify test-lib.sh to invoke it automatically instead of
chainlint.sed each time a test script is run.
This change reduces the number of "linter" invocations from 26800+ (once
per test run) down to 1050+ (once per test script), however, a
subsequent change will drop the number of invocations to 1 per `make
test`, thus fully realizing the benefit of the new linter.
Note that the "magic exit code 117" &&-chain checker added by bb79af9d09
(t/test-lib: introduce --chain-lint option, 2015-03-20) which is built
into t/test-lib.sh is retained since it has near zero-cost and
(theoretically) may catch a broken &&-chain not caught by chainlint.pl.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`test_run_` in test-lib.sh "lints" the body of a test by sending it down
a `sed chainlint.sed | grep` pipeline; this happens once for each test
run by a test script. Although this pipeline may seem relatively cheap
in isolation, it can become expensive when invoked 26800+ times by `make
test`, once for each test run, despite the existence of only 16500+ test
definitions across all tests scripts.
This difference in the number of tests defined in the scripts (16500+)
and the number of tests actually run by `make test` (26800+) is
explained by the fact that some test scripts run a very large number of
small tests, all driven by a series of functions/loops which fill in the
test bodies. This means that certain test definitions are being linted
repeatedly (tens or hundreds of times) unnecessarily. To avoid such
unnecessary work, 2d86a96220 (t: avoid sed-based chain-linting in some
expensive cases, 2021-05-13) added an optimization hack which allows
individual scripts to manually suppress the unnecessary repeated linting
of the same test definition.
However, unlike chainlint.sed which checks a test body as the test is
run, chainlint.pl checks each test definition just once, no matter how
many times the test is run, thus the sort of optimization hack
introduced by 2d86a96220 is no longer needed and can be retired.
Therefore, revert 2d86a96220.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During the development of chainlint.pl, numerous new self-tests were
created to verify correct functioning beyond the checks already
represented by the existing self-tests. The new checks fall into several
categories:
* behavior of the lexical analyzer for complex cases, such as line
splicing, token pasting, entering and exiting string contexts inside
and outside of test script bodies; for instance:
test_expect_success 'title' '
x=$(echo "something" |
sed -e '\''s/\\/\\\\/g'\'' -e '\''s/[[/.*^$]/\\&/g'\''
'
* behavior of the parser for all compound grammatical constructs, such
as `if...fi`, `case...esac`, `while...done`, `{...}`, etc., and for
other legal shell grammatical constructs not covered by existing
chainlint.sed self-tests, as well as complex cases, such as:
OUT=$( ((large_git 1>&3) | :) 3>&1 ) &&
* detection of problems, such as &&-chain breakage, from top-level to
any depth since the existing self-tests do not cover any top-level
context and only cover subshells one level deep due to limitations of
chainlint.sed
* address blind spots in chainlint.sed (such as not detecting a broken
&&-chain on a one-line for-loop in a subshell[1]) which chainlint.pl
correctly detects
* real-world cases which tripped up chainlint.pl during its development
[1]: https://lore.kernel.org/git/dce35a47012fecc6edc11c68e91dbb485c5bc36f.1661663880.git.gitgitgadget@gmail.com/
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The use of `|| return` (or `|| exit`) to signal failure within a loop
isn't effective when the loop is upstream of a pipe since the pipe
swallows all upstream exit codes and returns only the exit code of the
final command in the pipeline.
To work around this limitation, tests may adopt an alternative strategy
of signaling failure by emitting text which would never be emitted in
the non-failing case. For instance:
while condition
do
command1 &&
command2 ||
echo "impossible text"
done |
sort >actual &&
Such usage indicates deliberate thought about failure cases by the test
author, thus flagging them as missing `|| return` (or `|| exit`) is not
helpful. Therefore, take this case into consideration when checking for
explicit loop termination.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Shell `for` and `while` loops do not terminate automatically just
because a command fails within the loop body. Instead, the loop
continues to iterate and eventually returns the exit status of the final
command of the final iteration, which may not be the command which
failed, thus it is possible for failures to go undetected. Consequently,
it is important for test authors to explicitly handle failure within the
loop body by terminating the loop manually upon failure. This can be
done by returning a non-zero exit code from within the loop body
(i.e. `|| return 1`) or exiting (i.e. `|| exit 1`) if the loop is within
a subshell, or by manually checking `$?` and taking some appropriate
action. Therefore, add logic to detect and complain about loops which
lack explicit `return` or `exit`, or `$?` check.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are quite a few tests which print an error messages and then
explicitly signal failure with `false`, `return 1`, or `exit 1` as the
final command in an `if` branch. In these cases, the tests don't bother
maintaining the &&-chain between `echo` and the explicit "test failed"
indicator. Since such constructs are manually signaling failure, their
&&-chain breakage is legitimate and safe -- both for the command
immediately preceding `false`, `return`, or `exit`, as well as for all
preceding commands in the `if` branch. Therefore, stop flagging &&-chain
breakage in these sorts of cases.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are cases in which tests capture and check a command's exit code
explicitly without employing test_expect_code(). They do so by
intentionally breaking the &&-chain since it would be impossible to
capture "$?" in the failing case if the `status=$?` assignment was part
of the &&-chain. Since such constructs are manually checking the exit
code, their &&-chain breakage is legitimate and safe, thus should not be
flagged. Therefore, stop flagging &&-chain breakage in such cases.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The exit status of the `&` asynchronous operator which starts a command
in the background is unconditionally zero, and the few places in the
test scripts which launch commands asynchronously are not interested in
the exit status of the `&` operator (though they often capture the
background command's PID). As such, there is little value in complaining
about broken &&-chain for a command launched in the background, and
doing so would only make busy-work for test authors. Therefore, take
this special case into account when checking for &&-chain breakage.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that chainlint.pl is functional, take advantage of the existing
chainlint self-tests to validate its operation. (While at it, stop
validating chainlint.sed against the self-tests since it will soon be
retired.)
Due to chainlint.sed implementation limitations leaking into the
self-test "expect" files, a few of them require minor adjustment to make
them compatible with chainlint.pl which does not share those
limitations.
First, because `sed` does not provide any sort of real recursion,
chainlint.sed only emulates recursion into subshells, and each level of
recursion leads to a multiplicative increase in complexity of the `sed`
rules. To avoid substantial complexity, chainlint.sed, therefore, only
emulates subshell recursion one level deep. Any subshell deeper than
that is passed through as-is, which means that &&-chains are not checked
in deeper subshells. chainlint.pl, on the other hand, employs a proper
recursive descent parser, thus checks subshells to any depth and
correctly flags broken &&-chains in deep subshells.
Second, due to sed's line-oriented nature, chainlint.sed, by necessity,
folds multi-line quoted strings into a single line. chainlint.pl, on the
other hand, employs a proper lexical analyzer which preserves quoted
strings as-is, including embedded newlines.
Furthermore, the output of chainlint.sed and chainlint.pl do not match
precisely in terms of whitespace. However, since the purpose of the
self-checks is to verify that the ?!AMP?! annotations are being
correctly added, minor whitespace differences are immaterial. For this
reason, rather than adjusting whitespace in all existing self-test
"expect" files to match the new linter's output, the `check-chainlint`
target ignores whitespace differences. Since `diff -w` is not POSIX,
`check-chainlint` attempts to employ `git diff -w`, and only falls back
to non-POSIX `diff -w` (and `-u`) if `git diff` is not available.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to check for &&-chain breakage, each time TestParser encounters
a new command, it checks whether the previous command ends with `&&`,
and -- with a couple exceptions -- signals breakage if it does not. The
first exception is that a command may validly end with `||`, which is
commonly employed as `command || return 1` at the very end of a loop
body to terminate the loop early. The second is that piping one
command's output with `|` to another command does not constitute a
&&-chain break (the exit status of the pipe is the exit status of the
final command in the pipe).
However, it turns out that there are a few additional cases found in the
wild in which it is likely safe for `&&` to be missing even when other
commands follow. For instance:
while {condition-1}
do
test {condition-2} || return 1 # or `exit 1` within a subshell
more-commands
done
while {condition-1}
do
test {condition-2} || continue
more-commands
done
Such cases indicate deliberate thought about failure modes by the test
author, thus flagging them as breaking the &&-chain is not helpful.
Therefore, take these special cases into consideration when checking for
&&-chain breakage.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Although chainlint.pl has undergone a good deal of optimization during
its development -- increasing in speed significantly -- parsing and
validating 1050+ scripts and 16500+ tests via Perl is not exactly
instantaneous. However, perceived performance can be improved by taking
advantage of the fact that there is no interdependence between test
scripts or test definitions, thus parsing and validating can be done in
parallel. The number of available cores is determined automatically but
can be overridden via the --jobs option.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finish fleshing out chainlint.pl by adding ScriptParser, a parser which
scans shell scripts for tests defined by test_expect_success() and
test_expect_failure(), plucks the test body from each definition, and
passes it to TestParser for validation. It recognizes test definitions
not only at the top-level of test scripts but also tests synthesized
within compound commands such as loops and function.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
