| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We prefer for callback functions to match the signature with which
they'll be called, rather than casting them to the correct type when
assigning function pointers. Even though casting often works in the real
world, it is a violation of the standard.
We did a mass conversion in 939af16eac (hashmap_cmp_fn takes
hashmap_entry params, 2019-10-06), but have grown a few new cases since
then. Because of the cast, the compiler does not complain. However, as
of clang-18, UBSan will catch these at run-time, and the case in
range-diff.c triggers when running t3206.
After seeing that one, I scanned the results of:
git grep '_fn)[^(]' '*.c' | grep -v typedef
and found a similar case in compat/terminal.c (which presumably isn't
called in the test suite, since it doesn't trigger UBSan). There might
be other cases lurking if the cast is done using a typedef that doesn't
end in "_fn", but loosening it finds too many false positives. I also
looked for:
git grep ' = ([a-z_]*) *[a-z]' '*.c'
to find assignments that cast, but nothing looked like a function.
The resulting code is unfortunately a little longer, but the bonus of
using container_of() is that we are no longer restricted to the
hashmap_entry being at the start of the struct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We switched the function interface for fsck callbacks in a1aad71601
(fsck.h: use "enum object_type" instead of "int", 2021-03-28). However,
we accidentally flipped the type back to "int" as part of 0b4e9013f1
(fsck: mark unused parameters in various fsck callbacks, 2023-07-03).
The mistake happened because that commit was written before a1aad71601
and rebased forward, and I screwed up while resolving the conflict.
Curiously, the compiler does not warn about this mismatch, at least not
when using gcc and clang on Linux (nor in any of our CI environments).
Based on 28abf260a5 (builtin/fsck.c: don't conflate "int" and "enum" in
callback, 2021-06-01), I'd guess that this would cause the AIX xlc
compiler to complain. I noticed because clang-18's UBSan now identifies
mis-matched function calls at runtime, and does complain of this case
when running the test suite.
I'm not entirely clear on whether this mismatch is a problem in
practice. Compilers are certainly free to make enums smaller than "int"
if they don't need the bits, but I suspect that they have to promote
back to int for function calls (though I didn't dig in the standard, and
I won't be surprised if I'm simply wrong and the real-world impact would
depend on the ABI).
Regardless, switching it back to enum is obviously the right thing to do
here; the switch to "int" was simply a mistake.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'l10n-de-2.42' of github.com:ralfth/git:
l10n: Update German translation
|
|
* 'catalan' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
* 'update-uk-l10n' of github.com:arkid15r/git-ukrainian-l10n:
l10n: uk: update translation (2.42.0)
|
|
* 'tl/zh_CN_2.42.0_rnd1' of github.com:dyrone/git:
l10n: zh_CN: 2.42.0 round 2
l10n: zh_CN: v2.42.0 round 1
|
|
* 'master' of github.com:nafmo/git-l10n-sv:
l10n: sv.po: Update Swedish translation 5549t0f0u
|
|
* 'l10n-tr' of github.com:bitigchi/git-po:
l10n: tr: git 2.42.0
|
|
"diff-tree -b --exit-code" without "--patch" exits with 0 status,
not because it finds that the two input files are equivalent while
ignoring whitespaces, but because the implied "--raw" mode always
exits with 0 when whitespace tweaking options like "-b" and "-w"
are given, which is a long-standing bug.
We are about to fix it so that "--raw" and friends report the
differences with the exit status (even though they ignore the
whitespace tweaking options when producing their output), which
will make this test, which succeeded for a wrong reason, start
failing. Remove it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When options like "-w" is used while "--exit-code" option is in
effect, instead of the usual "do we have any filepair whose preimage
and postimage have different <mode,object>?" check, we need to compare
the contents of the blobs, taking into account that certain changes
are considered no-op.
With the previous step, we taught "--patch" codepath to set the
.found_changes bit correctly, even for a change that only affects
the mode and not object. The "--stat" codepath, however, did not
set the .found_changes bit at all. This lead to
$ git diff --stat -w --exit-code
for a change that does have an output to exit with status 0.
Set the bit by inspecting the list of paths the diffstat output is
given for (a mode-only change will still appear as a "0-line added
0-line deleted" change) to fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The codepath to notice the content-level changes, taking certain
no-op changes like "ignore whitespace" into account, forgot that
a mode-only change is still a change. This resulted in
$ git diff --patch --exit-code -w
to exit with status 0 even when there is such a mode-only change,
breaking both "--patch" and "--quiet" output formats.
Teach the builtin_diff() codepath that creation and deletion as well
as mode changes are all interesting changes.
Note that the test specifically checks removal of an empty file,
because if there is anything in the preimage (i.e. the removed file
is not empty), the removal would still trigger textual patch output
and the codepath for that does update .found_changes bit to report
that it found an interesting change. We need to make sure that the
.found_changes bit is set even without triggering textual patch
output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "--exit-code" is asked and the code cannot just answer by
comparing the object names on both sides but needs to inspect and
compare the contents, there are two ways that the result is found
out.
Some output modes, like "--stat" and "--patch", inherently have to
inspect the contents in order to show the differences in the way
they do. The codepaths for these modes set the .found_changes bit
as they compute what to show.
However, other output modes do not need to inspect the contents to
show the differences in the way they do. The most notable example
is "--quiet", which does not need to compute any output to show.
When they are asked to report "--exit-code", they run the codepaths
for the "--patch" output with their output redirected to "/dev/null",
only to set the .found_changes bit.
Currently, this fallback invocation of "--patch" output is done
after the "--stat" output format and its friends and before the
"--patch" and internal callback logic. Move it to the end of
the sequence to clarify the fallback status of this code block.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Teng Long <dyroneteng@gmail.com>
|
|
Signed-off-by: Teng Long <dyroneteng@gmail.com>
|
|
Typofix to documentation added during this cycle.
* ps/revision-stdin-with-options:
rev-list-options: fix typo in `--stdin` documentation
|
|
Mark-up fix to documentation added during this cycle.
* sa/doc-ls-remote:
show-ref doc: fix carets in monospace
|
|
Typo/grammofix to documentation added during this cycle.
* tl/notes-separator:
notes doc: tidy up `--no-stripspace` paragraph
notes doc: split up run-on sentences
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
With `--stdin`, we read *from* standard input, not *for*.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When commit 00bf685975 (show-ref doc: update for internal consistency,
2023-05-19) switched from double quotes to backticks around our {caret}
macro, we started rendering "{caret}" literally. Fix this by replacing
by a "^" character.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Where we document the `--no-stripspace` option, remove a superfluous
"For" to fix the grammar. Mark option names and command names using
`backticks` to set them in monospace.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When commit c4e2aa7d45 (notes.c: introduce "--[no-]stripspace" option,
2023-05-27) mentioned the new `--no-stripspace` in the documentation for
`-m` and `-F`, it created run-on sentences. It also used slightly
different language in the two sections for no apparent reason. Split the
sentences in two to improve readability, and while touching the two
sites, make them more similar.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
In 7ba7c52d76 (upload-pack: fix race condition in error messages,
2023-08-10), we have fixed a race in t5516-fetch-push.sh where sometimes
error messages got intermingled. This was done by splitting up the call
to `die()` such that we print the error message before writing to the
remote side, followed by a call to `exit(1)` afterwards.
This causes a subtle regression though as `die()` causes us to exit with
exit code 128, whereas we now call `exit(1)`. It's not really clear
whether we want to guarantee any specific error code in this case, and
neither do we document anything like that. But on the other hand, it
seems rather clear that this is an unintended side effect of the change
given that this change in behaviour was not mentioned at all.
Restore the status-quo by exiting with 128. The test in t5703 to
ensure that "git fetch" fails by using test_must_fail, which does
not care between exiting 1 and 128, so this changes will not affect
any test.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Emir SARI <emir_sari@icloud.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Co-authored-by: Kate Golovanova <kate@kgthreads.com>
Signed-off-by: Arkadii Yakovets <ark@cho.red>
Signed-off-by: Kate Golovanova <kate@kgthreads.com>
|
|
* 'master' of github.com:git/git: (34 commits)
Git 2.42-rc2
t4053: avoid writing to unopened pipe
t4053: avoid race when killing background processes
Git 2.42-rc1
git maintenance: avoid console window in scheduled tasks on Windows
win32: add a helper to run `git.exe` without a foreground window
t9001: remove excessive GIT_SEND_EMAIL_NOTTY=1
mv: handle lstat() failure correctly
parse-options: disallow negating OPTION_SET_INT 0
repack: free geometry struct
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
t0040: declare non-tab indentation to be okay in this script
advice: handle "rebase" in error_resolve_conflict()
A few more topics before -rc1
mailmap: change primary address for Glen Choo
gitignore: ignore clangd .cache directory
docs: update when `git bisect visualize` uses `gitk`
compat/mingw: implement a native locate_in_PATH()
run-command: conditionally define locate_in_PATH()
...
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test updates.
* pw/diff-no-index-from-named-pipes:
t4053: avoid writing to unopened pipe
t4053: avoid race when killing background processes
|
|
Correct use of lstat() that assumed a failing call would not
clobber the statbuf.
* st/mv-lstat-fix:
mv: handle lstat() failure correctly
|
|
Test fix.
* jc/send-email-pre-process-fix:
t9001: remove excessive GIT_SEND_EMAIL_NOTTY=1
|
|
Windows updates.
* ds/maintenance-on-windows-fix:
git maintenance: avoid console window in scheduled tasks on Windows
win32: add a helper to run `git.exe` without a foreground window
|
|
File attribute update.
* js/allow-t4000-to-be-indented-with-spaces:
t0040: declare non-tab indentation to be okay in this script
|
|
Adjust to newer Term::ReadLine to prevent it from breaking
the interactive prompt code in send-email.
* jk/send-email-with-new-readline:
send-email: avoid creating more than one Term::ReadLine object
send-email: drop FakeTerm hack
|
|
Leakfix.
* jk/repack-leakfix:
repack: free geometry struct
|
|
Developer support to detect meaningless combination of options.
* rs/parse-opt-forbid-set-int-0-without-noneg:
parse-options: disallow negating OPTION_SET_INT 0
|
|
i18n coverage improvement and avoidance of sentence lego.
* ob/rebase-conflict-advice-i18n-fix:
advice: handle "rebase" in error_resolve_conflict()
|
|
Replace misspelled word "overide" with correctly spelled "override".
Reported-By: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Jacob Abel <jacobabel@nullpo.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The continuations of the compound command were indented as if they were
continuations of the embedded pipe, which was misleading.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes an occasional hang I see when running t4053 with
--verbose-log using dash.
Commit 1e3f26542a (diff --no-index: support reading from named pipes,
2023-07-05) added a test that "diff --no-index" will complain when
comparing a named pipe and a directory. The minimum we need to test this
is to mkfifo the pipe, and then run "git diff --no-index pipe some_dir".
But the test does one thing more: it spawns a background shell process
that opens the pipe for writing, like this:
{
(>pipe) &
} &&
This extra writer _could_ be useful if Git misbehaves and tries to open
the pipe for reading. Without the writer, Git would block indefinitely
and the test would never end. But since we do not have such a bug, Git
does not open the pipe and it is the writing process which will block
indefinitely, since there are no readers. The test addresses this by
running "kill $!" in a test_when_finished block. Since the writer should
be blocking forever, this kill command will reliably find it waiting.
However, this seems to be somewhat racy, in that the writing process
sometimes hangs around even after the "kill". In a normal run of the
test script without options, this doesn't have any effect; the
main test script completes anyway. But with --verbose-log, we spawn a
"tee" process that reads the script output, and it won't end until all
descriptors pointing to its input pipe are closed. And the background
process that is hanging around still has its stderr, etc, pointed into
that pipe.
You can reproduce the situation like this:
cd t
./t4053-diff-no-index.sh --verbose-log --stress
Let that run for a few minutes, and then you'll find that some of the
runs have hung. For example, at 11:53, I ran:
$ ps xk start o pid,start,command | grep tee | head
713459 11:48:06 tee -a /home/peff/compile/git/t/test-results/t4053-diff-no-index.stress-9.out
713527 11:48:06 tee -a /home/peff/compile/git/t/test-results/t4053-diff-no-index.stress-15.out
719434 11:48:07 tee -a /home/peff/compile/git/t/test-results/t4053-diff-no-index.stress-1.out
728117 11:48:08 tee -a /home/peff/compile/git/t/test-results/t4053-diff-no-index.stress-5.out
738738 11:48:09 tee -a /home/peff/compile/git/t/test-results/t4053-diff-no-index.stress-31.out
739457 11:48:09 tee -a /home/peff/compile/git/t/test-results/t4053-diff-no-index.stress-27.out
744432 11:48:10 tee -a /home/peff/compile/git/t/test-results/t4053-diff-no-index.stress-21.out
744471 11:48:10 tee -a /home/peff/compile/git/t/test-results/t4053-diff-no-index.stress-29.out
761961 11:48:12 tee -a /home/peff/compile/git/t/test-results/t4053-diff-no-index.stress-0.out
812299 11:48:19 tee -a /home/peff/compile/git/t/test-results/t4053-diff-no-index.stress-8.out
All of these have been hung for several minutes. We can investigate one
and see that it's waiting to get EOF on its input:
$ strace -p 713459
strace: Process 713459 attached
read(0,
^C
Who else has that descriptor open?
$ lsof -a -p 713459 -d 0 +E
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
tee 713459 peff 0r FIFO 0,13 0t0 3943636 pipe 719203,sh,5w 719203,sh,7w 719203,sh,12w 719203,sh,13w
sh 719203 peff 5w FIFO 0,13 0t0 3943636 pipe 713459,tee,0r 719203,sh,7w 719203,sh,12w 719203,sh,13w
sh 719203 peff 7w FIFO 0,13 0t0 3943636 pipe 713459,tee,0r 719203,sh,5w 719203,sh,12w 719203,sh,13w
sh 719203 peff 12w FIFO 0,13 0t0 3943636 pipe 713459,tee,0r 719203,sh,5w 719203,sh,7w 719203,sh,13w
sh 719203 peff 13w FIFO 0,13 0t0 3943636 pipe 713459,tee,0r 719203,sh,5w 719203,sh,7w 719203,sh,12w
It's a shell, presumably a subshell spawned by the main script. Though
it may seem odd, having the same descriptor open several times is not
unreasonable (they're all basically the original stdout/stderr of the
script that has been copied). And they should all close when the process
exits. So what's it doing? Curiously, it will exit as soon as we strace
it:
$ strace -s 64 -p 719203
strace: Process 719203 attached
openat(AT_FDCWD, "pipe", O_WRONLY|O_CREAT|O_TRUNC, 0666) = -1 ENOENT (No such file or directory)
write(2, "./t4053-diff-no-index.sh: 7: eval: ", 35) = 35
write(2, "cannot create pipe: Directory nonexistent", 41) = 41
write(2, "\n", 1) = 1
exit_group(2) = ?
+++ exited with 2 +++
I think what happens is this:
- it is blocking in the openat() call for the pipe, as we expect (so
this is definitely the backgrounded subshell mentioned above)
- strace sends signals (probably STOP/CONT); those cause the kernel to
stop blocking, but libc will restart the system call automatically
- by this time, the "pipe" fifo is gone, so we'll actually try to
create a regular file. But of course the surrounding directory is
gone, too! So we get ENOENT, and then exit as normal.
So the blocking is something we expect to happen. But what we didn't
expect is for the process to still exist at all! It should have been
killed earlier when the parent process called "kill", but it wasn't. And
we can't catch the race at this point, because it happened much earlier.
One can guess, though, that there is some race with the shell setting up
the signal handling in the backgrounded subshell, and possibly blocking
or ignoring signals at the time that the "kill" is received. Curiously,
the race does not seem to happen if I use "bash" instead of "dash", so
presumably bash's setup here is more atomic.
One fix might be to try killing the subshell more aggressively, either
using SIGKILL, or looping on kill/wait. But that seems complex and
likely to introduce new problems/races. Instead, we can observe that the
writer is not needed at all. Git will notice the pipe via stat() before
it is ever opened. So we can simply drop the writer subshell entirely.
If we ever changed Git to open the path and fstat() it, this would
result in the test hanging. But we're not likely to do that. After all,
we have to stat() paths to see if they are openable at all (e.g., it
could be a directory), so this seems like a low risk. And anybody who
does make such a change will immediately see the issue, as Git would
hang consistently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If both directories D1 and D2 already exists, and further there is a
filesystem entity D2/D1, "git mv D1 D2" would fail, and we get an
error message that says:
"cannot move directory over file, source=D1, destination=D2/D1"
regardless of the type of existing "D2/D1". If it is a file, the
message is correct, but if it is a directory, it is not (we could
make the D2/D1 directory a union of its original contents and what
was in D1/, but that is not what we do).
The code that decies to issue the error message only checks for
existence of "D2/D1" and does not care what kind of thing sits at
the path.
Rephrase the message to say
"destination already exists, source=D1, destination=D2/D1"
that would be suitable for any kind of thing being in the way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Set the requires-full-index to false for "check-attr".
Add a test to ensure that the index is not expanded whether the files
are outside or inside the sparse-checkout cone when the sparse index is
enabled.
The `p2000` tests demonstrate a ~63% execution time reduction for
'git check-attr' using a sparse index.
Test before after
-----------------------------------------------------------------------
2000.106: git check-attr -a f2/f4/a (full-v3) 0.05 0.05 +0.0%
2000.107: git check-attr -a f2/f4/a (full-v4) 0.05 0.05 +0.0%
2000.108: git check-attr -a f2/f4/a (sparse-v3) 0.04 0.02 -50.0%
2000.109: git check-attr -a f2/f4/a (sparse-v4) 0.04 0.01 -75.0%
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before this patch, git check-attr was unable to read the attributes from
a .gitattributes file within a sparse directory. The original comment
was operating under the assumption that users are only interested in
files or directories inside the cones. Therefore, in the original code,
in the case of a cone-mode sparse-checkout, we didn't load the
.gitattributes file.
However, this behavior can lead to missing attributes for files inside
sparse directories, causing inconsistencies in file handling.
To resolve this, revise 'git check-attr' to allow attribute reading for
files in sparse directories from the corresponding .gitattributes files:
1.Utilize path_in_cone_mode_sparse_checkout() and index_name_pos_sparse
to check if a path falls within a sparse directory.
2.If path is inside a sparse directory, employ the value of
index_name_pos_sparse() to find the sparse directory containing path and
path relative to sparse directory. Proceed to read attributes from the
tree OID of the sparse directory using read_attr_from_blob().
3.If path is not inside a sparse directory，ensure that attributes are
fetched from the index blob with read_blob_data_from_index().
Change the test 'check-attr with pathspec outside sparse definition' to
'test_expect_success' to reflect that the attributes inside a sparse
directory can now be read. Ensure that the sparse index case works
correctly for git check-attr to illustrate the successful handling of
attributes within sparse directories.
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests for `git check-attr`, make sure attribute file does get read
from index when path is either inside or outside of sparse-checkout
definition.
Add a test named 'diff --check with pathspec outside sparse definition'.
It starts by disabling the trailing whitespace and space-before-tab
checks using the core. whitespace configuration option. Then, it
specifically re-enables the trailing whitespace check for a file located
in a sparse directory by adding a whitespace=trailing-space rule to the
.gitattributes file within that directory. Next, create and populate the
folder1 directory, and then add the .gitattributes file to the index.
Edit the contents of folder1/a, add it to the index, and proceed to
"re-sparsify" 'folder1/' with 'git sparse-checkout reapply'. Finally,
use 'git diff --check --cached' to compare the 'index vs. HEAD',
ensuring the correct application of the attribute rules even when the
file's path is outside the sparse-checkout definition.
Mark the two tests 'check-attr with pathspec outside sparse definition'
and 'diff --check with pathspec outside sparse definition' as
'test_expect_failure' to reflect an existing issue where the attributes
inside a sparse directory are ignored. Ensure that the 'check-attr'
command fails to read the required attributes to demonstrate this
expected failure.
Helped-by: Victoria Dye <vdye@github.com>
Signed-off-by: Shuqi Liang <cheskaqiqi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running 'git maintenance start', the current pattern is to
configure global config settings to enable maintenance on the current
repository and set 'maintenance.auto' to false and _then_ to set up the
schedule with the system scheduler.
This has a problematic error condition: if the scheduler fails to
initialize, the repository still will not use automatic maintenance due
to the 'maintenance.auto' setting.
Fix this gap by swapping the order of operations. If Git fails to
initialize maintenance, then the config changes should never happen.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git maintenance run' command prevents concurrent runs in the same
repository using a 'maintenance.lock' file. However, when using systemd
the hourly maintenance runs the same time as the daily and weekly runs.
(Similarly, daily maintenance runs at the same time as weekly
maintenance.) These competing commands result in some maintenance not
actually being run.
This overlap was something we could not fix until we made the recent
change to not use the builting 'hourly', 'daily', and 'weekly' schedules
in systemd. We can adjust the schedules such that:
1. Hourly runs avoid the 0th hour.
2. Daily runs avoid Monday.
This will keep maintenance runs from colliding when using systemd.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The get_random_minute() method was created to allow maintenance
schedules to be fixed to a random minute of the hour. This randomness is
only intended to spread out the load from a number of clients, but each
client should have an hour between each maintenance cycle.
Add this random minute to the systemd integration.
This integration is more complicated than similar changes for other
schedulers because of a neat trick that systemd allows: templating.
The previous implementation generated two template files with names
of the form 'git-maintenance@.(timer|service)'. The '.timer' or
'.service' indicates that this is a template that is picked up when we
later specify '...@<schedule>.timer' or '...@<schedule>.service'. The
'<schedule>' string is then used to insert into the template both the
'OnCalendar' schedule setting and the '--schedule' parameter of the
'git maintenance run' command.
In order to set these schedules to a given minute, we can no longer use
the 'hourly', 'daily', or 'weekly' strings for '<schedule>' and instead
need to abandon the template model for the .timer files. We can still
use templates for the .service files. For this reason, we split these
writes into two methods.
Modify the template with a custom schedule in the 'OnCalendar' setting.
This schedule has some interesting differences from cron-like patterns,
but is relatively easy to figure out from context. The one that might be
confusing is that '*-*-*' is a date-based pattern, but this must be
omitted when using 'Mon' to signal that we care about the day of the
week. Monday is used since that matches the day used for the 'weekly'
schedule used previously.
Now that the timer files are not templates, we might want to abandon the
'@' symbol in the file names. However, this would cause users with
existing schedules to get two competing schedules due to different
names. The work to remove the old schedule name is one thing that we can
avoid by keeping the '@' symbol in our unit names. Since we are locked
into this name, it makes sense that we keep the template model for the
.service files.
The rest of the change involves making sure we are writing these .timer
and .service files before initializing the schedule with 'systemctl' and
deleting the files when we are done. Some changes are also made to share
the random minute along with a single computation of the execution path
of the current Git executable.
In addition, older Git versions may have written a
'git-maintenance@.timer' template file. Be sure to remove this when
successfully enabling maintenance (or disabling maintenance).
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
